MODUL general specifications

Size: px

Start display at page:

Download "MODUL general specifications"

Arleen Ross
5 years ago
Views:

1 hinges

2 general specifications inge-to-door attachment Mounting plate-to-cabinet Press-in Use #6 wood screws Pre-attached dowels, install with lum MINIPRESS lum boring pattern Door-to-cabinet attachment Door 9.5 C Ø35 C Cup centerpoint /16" 27/" 7/8" 15/16" 31/" 1" Ø8 ore distance only for use with select lum hinges Cup centerpoint is the MINIPRESS or MINIDRILL fence depth position. o install slide hinge on to the mounting plate, tighten rear fixing screw. Loosen rear fixing screw and pull hinge forward to remove. hree-dimensional adjustment Side adjustment eight adjustment Depth adjustment Rotate front screw to increase or decrease door overlay. Range = ±2 mm Loosen screw(s) on the mounting plate. Adjust door to position and tighten screws. Range = ±3 mm Loosen back screw. Adjust door to position and tighten screw. Range = ±2 mm wo piece mounting plate One piece mounting plate inge dimension abbreviations Minimum reveal inges per door X W R OL = oring distance = Mounting plate height OL = Door overlay P = Door protrusion (at max opening) S P R = Reveal S = inge arm protrusion = Door thickness W = Side panel width X = Fixed cup distance 19 1 rad (1/ ") Minimum Reveal A minimum reveal per door is required to keep the door from binding and varies depending on door thickness (see Minimum reveal table for each hinge). Minimum reveal based on outside door edge with radius of 1 (1/"). X = Door height 100" Y = Number of hinges his chart can serve as a guide for determining the number of hinges per door. Note that door weight can also determine the number of hinges required. 80" 60" 40" 20" X Y 15 lb lb lb lb he distance between the top and bottom hinges must be greater than the width of the door. 53

100 hinges 100 Frame cabinet applications door Features - 100 opening angle - All metal hinge, nickel-plated - hree-dimensional adjustment - Slide-on hinge arm Cover caps page 59 Mounting plates

3 100 hinges 100 Frame cabinet applications door Features opening angle - All metal hinge, nickel-plated - hree-dimensional adjustment - Slide-on hinge arm Cover caps page 59 Mounting plates pages Panel cabinet applications door Door thickness ore See back cover fold out for more specifications Straight-arm hinges Free swing 91M M2550 Press-in 91M M2580 Minimum Reveal Minimum reveal table Cross-refer ence the door thickness and bore distance to assure that doors won t bind when opened. table P S Plate ore distance Clearances fixed distance NOE: 9 plate only available for panel cabinets Partial overlay door win overlay doors alf-cranked hinges (9.5 mm) 91M2650 Press-in 91M2680 table Partial overlay Reveal P S Plate ore distance Clearances 1.5 fixed distance Reveal table win overlay W P S Plate ore distance Panel Clearances Inset door Full-cranked hinges (18 mm) 91M2750 Press-in 91M Reveal table P S Plate ore distance Clearances - 7 fixed distance 10.5 Reveal 54

170 hinges 170 Frame cabinet applications door Features - 170 opening angle - All metal hinge, nickel-plated - hree-dimensional adjustment - Slide-on hinge arm Cover caps page 59 Mounting plates

4 170 hinges 170 Frame cabinet applications door Features opening angle - All metal hinge, nickel-plated - hree-dimensional adjustment - Slide-on hinge arm Cover caps page 59 Mounting plates pages Panel cabinet applications door W Minimum Reveal Minimum reveal table Cross-reference the door thickness and bore distance to assure that doors won t bind when opened Door thickness ore See back cover fold out for more specifications Straight-arm hinges 91A6550 Press-in 18 91A table P S Plate ore distance Clearances fixed distance NOE: 9 plate only available for panel cabinets Partial overlay door win overlay doors W alf-cranked hinges (9.5 mm) 91A6650 Press-in 18 91A6680 table Partial overlay P S Plate ore distance Clearances 1.5 fixed distance Reveal table win overlay Reveal W P S Plate ore distance Panel Clearances Inset door Use half-cranked hinge Any 9 mm plate alf-cranked hinges (9.5 mm) 91A6650 Press-in 18 91A Reveal table P S Plate ore distance Clearances fixed distance Reveal 55

5 56

mounting plates One piece wing mounting plate Cover caps - Add additional page 61 wood screw if used with wide angle hinges Mounting plates pages 59-60 - Steel, nickel-plated - Attached with wood

6 mounting plates One piece wing mounting plate Cover caps - Add additional page 61 wood screw if used with wide angle hinges Mounting plates pages Steel, nickel-plated - Attached with wood screws #6 x 5/8" - eight adjustment ±3 mm Wood screws () eight 0 606N or 606P 193L6100 One piece wing mounting plate Steel, nickel-plated - Attached with pre-mounted system screws Ø5 mm ( E) - eight adjustment ±3 mm - Add additional wood screw if used with wide angled hinges 5 wo piece mounting plate System screws () eight 0 Pre-mounted 193L Zinc die-cast, nickel-plated - Attached with wood screws #6 x 5/8" - eight adjustment ±2 mm - Add additional wood screw if used with wide angled hinges Wood screws () eight 0 () eight 9 606N or 606P

mounting plates wo piece wing mounting plate - eight adjustment ±2 mm Cover caps - Add additional page wood 61 screw if used with wide angle hinges Mounting plates pages 59-60 5.

G 1959100 Face frame adapter plate - Zinc die-cast, nickel-plated - Attached with wood screws #7 x 3/4" - eight adjustment ±2 mm - Use of the PlateMate recommended for proper installation (see page

7 mounting plates wo piece wing mounting plate - eight adjustment ±2 mm Cover caps - Add additional page wood 61 screw if used with wide angle hinges Mounting plates pages Zinc die-cast, nickel-plated - Attached with #7 x 9/16" wood screw or Ø6 x 14.5 mm system screws Wood screw or System screws () eight 0 707N G Face frame adapter plate - Zinc die-cast, nickel-plated - Attached with wood screws #7 x 3/4" - eight adjustment ±2 mm - Use of the PlateMate recommended for proper installation (see page 78) Recessed frame adapter plate 12.5 Wood screws () eight 0 () eight N Zinc die-cast, nickel-plated - Attached with wood screws #6 x 5/8" - eight and side adjustment ±2 mm - For overlays of 24 mm (15/16") to 27 mm (1-1/16") Wood screw () eight 0 606N or 606P

8 cover caps a Nylon (black or white) 90M M (lum logo) M03 cover caps Nylon 100 hinges Straight-arm 90M2103 Cranked-arm 94M hinges lind corner hinges Straight-arm 90M2103 NOE: Custom logo available in nylon (black or white). Consult your lum representative for minimum quantities and lead times on custom logos. 59

COMPACT BLUMOTION. COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION.

COMPACT BLUMOTION. COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION. COMPACT BLUMOTION COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION www.blum.com/compact Innovative technology concentrated in a small space BLUMOTION inside Since the 1980s Blum