25 TONNE HYDRAULIC PRESS MODEL NO: AHP 26

Size: px
Start display at page:

Download "25 TONNE HYDRAULIC PRESS MODEL NO: AHP 26"

Transcription

1 WARNING: Read these instructions before using the machine 25 TONNE HYDRAULIC PRESS MODEL NO: AHP 26 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS1211

2 INTRODUCTION Thank you for purchasing this CLARKE 25 Tonne Hydraulic Press Before attempting to operate the machine, it is essential that you read this manual thoroughly and carefully follow all instructions given. In doing so you will ensure the safety of yourself and that of others around you, and you can also look forward to the press giving you long and satisfactory service. GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. SAFETY PRECAUTIONS During assembly or if the press is moved, ALWAYS use a suitable crane or hoist, do not manhandle. Ensure the press is located on firm level ground with adequate light. Before applying a load, ensure both press bed support pins are fully engaged. Ensure that hydraulic hoses and couplings are completely sound. Before use, always ensure the workpiece is firmly secure and stable. Always clean spills of hydraulic oil immediately as this can be dangerous in a workshop environment. Do not exceed the rated capacity of the press. Do not allow any person who is inexperienced in the use of hydraulic presses, to use the press unless they are under direct supervision. Do not allow anyone to work directly in front of the press when it is in use. 2

3 Never tamper with the press. The safety valve is calibrated and sealed at the factory; do not attempt to change the setting. Use only the recommended hydraulic oil. Components of this press are specially designed to withstand the rated capacity. Do not substitute bolts, pins, or any other components. Always apply the load under the centre of the ram. Offset loads can damage the ram or ram mount and may cause the work piece to eject. Before operating, check for signs of cracked welds, bent bed pins, loose or missing bolts, or any other structural damage. Do not operate if any of these conditions exist. Have repairs made only by authorised service centre. Remove load from press bed before attempting to adjust bed height. Press only on a work piece supported by the press bed. When using accessories such as arbor plates, be certain they are centered below the ram and are in full contact with the bed. Parts being pressed may splinter, shatter, or be ejected from the press. Due to varied applications, it is your responsibility to always use adequate guards, wear eye protection and protective clothing when operating this press. Keep hands and fingers away from parts that may pinch and shift. Keep warning decals legible and intact. Replacements may be obtained from Clarke International Spare Parts Department. Failure to heed these warnings may result in damage to the equipment, or failure resulting in property damage, personal, or even fatal injury. DO NOT use extension tubes on the pump handle. Excessive effort can cause damage and/or accidents. 3

4 ASSEMBLY Ensure the press and its components suffered no damage during transit. Should any damage be apparent, please contact your CLARKE dealer immediately. IMPORTANT: Due to the weight of the press, we recommend that you get assistance from another person during assembly. 1. With the main frame upright and adequately supported, bolt on the two feet using the nuts and bolts supplied. IMPORTANT: We strongly recommend that the press be firmly secured to a firm and level floor using expansion bolts (not supplied). 2. Remove the plug on the front of the pump body and replace it with the vent plug supplied. 3. Remove the cap on top of the ram. Seal the thread with PTFE tape and screw in the pressure gauge, ensuring it is tight. 4. Fit the pump handle into the actuating lever. NOTE: Do not locate your press where it will be open to the elements, as it is designed to operate at temperatures of between -10 O C to 40 O C. Severe weather conditions will damage the hydraulic system. 5. Insert the two supporting pins into the lowest holes on the frame, one each side. 6. With assistance place the bed on top of the two pins. BED HEIGHT Position the bed at the desired height, so as it will be as close as possible to the ram when the workpiece is mounted. IMPORTANT: Due to the weight of the bed, we recommend that you get assistance from another person when adjusting the bed height. 1. Raise one side of the bed, and insert a supporting pin into the next locating hole. 2. Repeat at the other end of the bed to level out the bed, 3. Repeat steps 1 and 2 until the bed is at the desired height, with the supporting pins fully home. CAUTION: THE BED HEIGHT SHOULD ONLY BE RAISED OR LOWERED 1 HOLE AT A TIME, WORKING ALTERNATELY FROM ONE SIDE AND THEN THE OTHER, FAILURE TO WORK IN THIS WAY MAY CAUSE THE BED TO FALL AND CAUSE INJURY TO THE OPERATOR 4

5 POSITIONING THE RAM The ram can positioned as required by sliding it along the top rail. Always position the ram directly above the workpiece. HYDRAULIC PUMP/RAM OPERATION The pump is provided with two valves, operated by turning the respective handwheel as shown. Valve A is used for raising or lowering the ram. Turn the handwheel clockwise and pump the handle to operate (or lower) the ram. Turning the handwheel anticlockwise releases the pressure and the ram will rise. Valve B is used to move the ram in fast or slow mode. Turn the handwheel clockwise and pump the handle to move the ram quickly to the workpiece. Turning the handwheel anticlockwise and pumping the handle moves the ram at a slower rate. 5

6 OPERATION 1. Place the workpiece on the bed. It must be completely stable. you must use packing or shims where required. Vee blocks and a supporting plate are supplied, which locate on the bed. Place the workpiece on a combination of these to give it stability. DO NOT point load these accessories as they are not designed to take the full force of the ram in one spot. Ensure they are adequately supported. NOTE: Any packing pieces or shims used MUST be capable of withstanding the pressure that will be brought to bear, and MUST be of sufficient size with sufficient surface area, so as to avoid the possibility of slipping or springing out. Mating surfaces MUST be horizontal so that the force being exerted will NOT be at an angle. 2. Turn the Handwheel B, clockwise to move the ram quickly, and Handwheel A, clockwise to lower the ram. 3. Pump the handle to bring the ram very lightly into contact with the workpiece. 4. Manoeuvre the workpiece or slide the ram so that the desired point of contact is directly beneath the centre of the ram. 5. When satisfied that the workpiece is correctly lined up and is completely stable in that position, ensure the handwheel B, is turned ANTICLOCKWISE, and slowly pump the handle so that the ram begins to exert pressure on the workpiece. Continue to pump the handle whilst standing to the side. Do NOT stand directly in front of the work, and constantly monitor the process, ensuring the ram and work remain completely in line, and there is no risk of slipping. 6. When the process is complete, turn the handwheel A, anticlockwise to release ram pressure. WARNING: NEVER use extensions to the ram pumping handle 6

7 MAINTENANCE A visual inspection must be made before each use of the press, checking for leaking hydraulic fluid, and damaged, loose or missing parts. Owners and/or users should be aware that repair of this equipment may require specialised knowledge and facilities. It is recommended that a thorough annual inspection of the press be made and that any defective parts, decals or warning labels be replaced with genuine Clarke parts. Any press which appears to be damaged in any way, is found to be badly worn, or operates abnormally SHOULD BE REMOVED FROM SERVICE until the necessary repairs are made. PERIODICALLY Check the press frame to make sure all bolts are tight and inspect for cracked welds, bent, loose or missing parts. Check the hydraulic connections for leaks. Replace or properly repair any damaged or leaking hydraulic components before using. EVERY 6 MONTHS Check the hydraulic pump oil level, by removing the plug from the front of the unit. Oil should be level with the bottom of the hole. If necessary top up with CLARKE Hydraulic Oil, Part No only. This operation is carried out with the ram fully retracted. EVERY 2 YEARS Replace the hydraulic oil. This operation requires the dismantling of the hydraulic system, for which you should consult your CLARKE dealer. If any rust is apparent it must be removed completely and reinspected. 7

8 SPECIFICATIONS Capacity 25 tonne Dimensions Pressure 395 Bar A 175 mm Ram Stroke 160 mm B 610 mm Ram Diameter 50 mm C 1000 mm Net Weight 160 kg D 295 mm E 160 mm F 950 mm G 600 mm H 1920 mm L 125 mm 8

9 PARTS DIAGRAM PART NO DESCRIPTION PART NO DESCRIPTION A0315 Nut M12 R0266 Spacer A0346 Washer 12 x 24 R1182 Pump Assembly B0900 Bolt TE M12 x 30 R1650 Flexible pipe B5047 Gasket with 1/4 seal R1656 Working Plane B5863 Connector for gauge R1664 V-Block R0046 Nut M12 R1667XX Foot R0058 Pressure Gauge R1672XX Frame R0093 Bed Supporting Pin 25 x R1680 Cylinder Assembly 320mm R0132 Washer 3/8 R3053 Connector M-M 1/4 X3/8 R0140 Bolt TE M12 x 90 9

10 DECLARATION OF CONFORMITY 10

11 NOTES 11

12

SHBP10M HYDRAULIC PRESS WITH MANDRELS

SHBP10M HYDRAULIC PRESS WITH MANDRELS SHBP10M HYDRAULIC PRESS WITH MANDRELS OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. SPECIFICATION MAX CAPACITY STROKE WORK RANGE WEIGHT 10 TONNE

More information

SHOP PRESS ASSEMBLY INSTRUCTIONS

SHOP PRESS ASSEMBLY INSTRUCTIONS SHOP PRESS ASSEMBLY INSTRUCTIONS CP403-40 TON ELECTRIC PRODUCTION PRESS CP405-50 TON ELECTRIC PRODUCTION PRESS WITH WINCH PRESS SPECIFICATIONS Arcan Model No. A B C D E F G H I J K L CP403 74" 32" 29.75"

More information

8 TONNE LOG SPLITTER

8 TONNE LOG SPLITTER 8 TONNE LOG SPLITTER MODEL NO: LOGBUSTER 9 PART NO: 3402043 OPERATION & MAINTENANCE INSTRUCTIONS LS03/16 INTRODUCTION Thank you for purchasing this CLARKE 8 Tonne Log Splitter. Before attempting to use

More information

10 Ton LOG SPLITTER MODEL NO: Log Buster 4 PART No:

10 Ton LOG SPLITTER MODEL NO: Log Buster 4 PART No: 10 Ton LOG SPLITTER MODEL NO: Log Buster 4 PART No: 3402025 OPERATION & MAINTENANCE INSTRUCTIONS 1603 ISS 4 Thank you for purchasing this CLARKE 10 ton manually operated Log Splitter. Before attempting

More information

12 TON HYDRAULIC SHOP PRESS. Instruction Manual. Please read this instruction manual carefully before use.

12 TON HYDRAULIC SHOP PRESS. Instruction Manual. Please read this instruction manual carefully before use. 12 TON HYDRAULIC SHOP PRESS Instruction Manual Please read this instruction manual carefully before use. IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS AND WARNINGS. USE

More information

MAHLE CBP-10 / CBP-10A & CSP-10 / CSP-10A. Operation Manual Shop press

MAHLE CBP-10 / CBP-10A & CSP-10 / CSP-10A. Operation Manual Shop press MAHLE CBP-10 / CBP-10A & CSP-10 / CSP-10A EN Operation Manual Shop press en 2 CBP-10 / CSP-10 EVERY PERSON WHO OPERATES THIS EQUIPMENT NEEDS TO KNOW AND UNDERSTAND ALL OF THE INFORMATION IN THIS MANUAL

More information

34 o Clipped Head Air Frame Nailer

34 o Clipped Head Air Frame Nailer 34 o Clipped Head Air Frame Nailer MODEL: CFN34 Part No. 3110397 OPERATING & MAINTENANCE INSTRUCTIONS 1207 SPECIFICATIONS Min. Hose Size (ID)... 6 mm (1/4 ) Ave. Air Consumption... 14.8 cfm Operating Pressure...

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS FOOT OPERATED 1.5 TONNE LOG SPLITTER MODEL NO: LOGBUSTER 10 PART NO: 3402046 OPERATION & MAINTENANCE INSTRUCTIONS LS0815 INTRODUCTION Thank you for purchasing this CLARKE Foot Operated 1.5 Tonne Log Splitter.

More information

20 TON HyDRAULIC SHOP PRESS with GRID GUARD 06/2015 INSTRUCTION MANUAL MODEL: KHP-20T-GG COPYRIGHT 2015 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.

20 TON HyDRAULIC SHOP PRESS with GRID GUARD 06/2015 INSTRUCTION MANUAL MODEL: KHP-20T-GG COPYRIGHT 2015 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. 06/2015 20 TON HyDRAULIC SHOP PRESS with GRID GUARD MODEL: KHP-20T-GG INSTRUCTION MANUAL COPYRIGHT 2015 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. warranty INFORMATION 2-yEAR LIMITED WARRANTY FOR THIS

More information

Form No Assembly & Operating Instructions for: SAFETY PRECAUTIONS

Form No Assembly & Operating Instructions for: SAFETY PRECAUTIONS Form No. 0230 Assembly & Operating Instructions for: 833 20300 83 2220 837 0-0008 078 SHOP PRESS Max. Capacity: 2 Ton These instructions are intended for various shop presses. Some models are shipped assembled

More information

SHHP20 FLOOR STANDING HYDRAULIC PRESS

SHHP20 FLOOR STANDING HYDRAULIC PRESS SHHP20 FLOOR STANDING HYDRAULIC PRESS OWNER S MANUAL 20 TON MAX CAPACITY FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. SPECIFICATION MAX CAPACITY STROKE WORK

More information

Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A

Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A Model HP-35A shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-331406 Ph.: 800-274-6848 Revision D

More information

Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A

Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A Model HP-35A shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-331406 Ph.: 800-274-6848 Revision C1

More information

OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE

OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE 1 CONTENTS Safety 3 Labels 5 Quick Guide 6 In Depth Instructions 8 Operating Instructions 12

More information

Operating and Maintenance Instructions Keep for future reference

Operating and Maintenance Instructions Keep for future reference Operating and Maintenance Instructions Keep for future reference TM400 Log Splitter 1 Index SAFETY... 3 LABELS.... 4 QUICK GUIDE including storage and transport... 5 IN-DEPTH INSTRUCTIONS.... 6 OPERATING

More information

20 Ton HYDRAULIC SHOP PRESS

20 Ton HYDRAULIC SHOP PRESS 20 Ton HYDRAULIC SHOP PRESS Stock Number W41063 OWNER S MANUAL WARNING! It is the owner and/or operators responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS Lockable Wall Cabinet Model: CWC50 Part No: 7640020 ASSEMBLY INSTRUCTIONS GC05/13 INTRODUCTION Thank you for purchasing this CLARKE product. Before assembling the cabinet, be sure to read these instructions

More information

8-Ton Manual Splitter OWNER S MANUAL

8-Ton Manual Splitter OWNER S MANUAL 8-Ton Manual Splitter OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

FOLDING MITRE SAW STAND MODEL NO: CFMSS1

FOLDING MITRE SAW STAND MODEL NO: CFMSS1 CFMSS1 Folding Mitre Saw Stand (080602-1).fm Page 1 Monday, November 7, 2011 3:48 PM FOLDING MITRE SAW STAND MODEL NO: CFMSS1 PART NO: 6500968 OPERATION & MAINTENANCE INSTRUCTIONS LS1111 CFMSS1 Folding

More information

Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher

Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Model # 100 Standard Model #100-U Heavy Duty CAUTION: Read and Understand

More information

FOLDING WORKBENCH MODEL NO: CFWB1 ASSEMBLY INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS LS ISS 2

FOLDING WORKBENCH MODEL NO: CFWB1 ASSEMBLY INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS LS ISS 2 FOLDING WORKBENCH MODEL NO: CFWB1 PART NO: 6501580 ASSEMBLY INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0418 - ISS 2 INTRODUCTION Thank you for selecting this Clarke folding workbench. Read this manual before

More information

TOOL STAND. Model No. CUTS1 ASSEMBLY INSTRUCTIONS 0513

TOOL STAND. Model No. CUTS1 ASSEMBLY INSTRUCTIONS 0513 TOOL STAND Model No. CUTS1 ASSEMBLY INSTRUCTIONS 0513 Storage To store the Tool Stand, the legs need to be collapsed, as follows: Fitrstly remove the Rollers if fitted, and ensure the table extensions

More information

LOG SPLITTER MODEL NO: LOGBUSTER 8 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS1113

LOG SPLITTER MODEL NO: LOGBUSTER 8 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS1113 LOG SPLITTER MODEL NO: LOGBUSTER 8 PART NO: 3402042 OPERATION & MAINTENANCE INSTRUCTIONS LS1113 INTRODUCTION Thank you for purchasing this CLARKE Log Splitter. Before attempting to use this product, please

More information

Fisher 667 Diaphragm Actuators Size 80 and 100

Fisher 667 Diaphragm Actuators Size 80 and 100 Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...

More information

CHAINSAW LOG HORSE MODEL NO: CCLH1

CHAINSAW LOG HORSE MODEL NO: CCLH1 CHAINSAW LOG HORSE MODEL NO: CCLH1 Part No: 3402085 ASSEMBLY & OPERATING INSTRUCTIONS GC01011(rev2) INTRODUCTION Thank you for purchasing this CLARKE Log Horse. Before attempting to operate the product,

More information

Operation Manual and Parts Book. Wessex Country Log Splitter LS100 Hydraulically Powered, Tractor Mounted. Product Code: LS100

Operation Manual and Parts Book. Wessex Country Log Splitter LS100 Hydraulically Powered, Tractor Mounted. Product Code: LS100 Operation Manual and Parts Book Wessex Country Log Splitter LS100 Hydraulically Powered, Tractor Mounted. Product Code: LS100 Manufacturers and Distributors of Quality Equipment CONTENTS 3...Welcome to

More information

OPERATION & MAINTENANCE

OPERATION & MAINTENANCE DOUBLE HEADED METAL NIBBLER MODEL NO: DHC-2 PART NO: 6500233 OPERATION & MAINTENANCE INSTRUCTIONS LS0609 INTRODUCTION Thank you for purchasing this CLARKE Double Headed Metal Nibbler. Before attempting

More information

Hedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850

Hedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850 Operator s manual Manual d utalisation Manual de instrucciones Hedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850 GB FR ES KEY TO SYMBOLS

More information

600mm COMPOUND MITRE SAW ASSEMBLY INSTRUCTIONS. MODEL NO: MBS600D Part No: GC05/12

600mm COMPOUND MITRE SAW ASSEMBLY INSTRUCTIONS. MODEL NO: MBS600D Part No: GC05/12 600mm COMPOUND MITRE SAW MODEL NO: MBS600D Part No: 6461516 ASSEMBLY INSTRUCTIONS GC05/12 INTRODUCTION Thank you for purchasing this CLARKE Mitre Saw. Before attempting to use the product, it is essential

More information

MOTORCYCLE DOLLY MODEL NO: MCD1 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0112

MOTORCYCLE DOLLY MODEL NO: MCD1 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0112 MOTORCYCLE DOLLY MODEL NO: MCD1 PART NO: 7610139 OPERATION & MAINTENANCE INSTRUCTIONS LS0112 INTRODUCTION Thank you for purchasing this CLARKE Motorcycle Dolly. Before attempting to operate this product,

More information

LPK1550 Hydraulic Crimping Tool 15-ton

LPK1550 Hydraulic Crimping Tool 15-ton SERVICE MANUAL LPK1550 Hydraulic Crimping Tool 15-ton Serial Code FYF Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register

More information

BELT/DISC SANDER MODEL NO: CBS1-5 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: GC0414

BELT/DISC SANDER MODEL NO: CBS1-5 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: GC0414 BELT/DISC SANDER MODEL NO: CBS1-5 PART NO: 6500403 OPERATION & MAINTENANCE INSTRUCTIONS GC0414 INTRODUCTION Thank you for purchasing this CLARKE Belt and Disc Sander, which is designed for hobby, DIY and

More information

CHAINSAW SHARPENER MODEL: ECSS-1

CHAINSAW SHARPENER MODEL: ECSS-1 CHAINSAW SHARPENER MODEL: ECSS-1 Part No: 3402075 ASSEMBLY & INSTRUCTION MANUAL LS0409 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that

More information

OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL SE400 LOG SPLITTER KEEP FOR FUTURE USE

OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL SE400 LOG SPLITTER KEEP FOR FUTURE USE OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL SE400 LOG SPLITTER KEEP FOR FUTURE USE 1 CONTENTS Safety 3 Labels 6 Quick Guide 7 In Depth Instructions 9 Warranty Information 16 Technical Specifications

More information

30 LITRE MINI CEMENT MIXER. Model CCM50 Part No OPERATING & MAINTENANCE INSTRUCTIONS

30 LITRE MINI CEMENT MIXER. Model CCM50 Part No OPERATING & MAINTENANCE INSTRUCTIONS 30 LITRE MINI CEMENT MIXER Model CCM50 Part No. 3400850 0907 OPERATING & MAINTENANCE INSTRUCTIONS Thank you for purchasing this CLARKE Mini Mixer, model CCM50. Please read this leaflet thoroughly and follow

More information

BOLTLESS WORKSTATION

BOLTLESS WORKSTATION BOLTLESS WORKSTATION MODEL NO: CWB450WS PART NO: 7637882 ASSEMBLY INSTRUCTIONS GC0416 INTRODUCTION Thank you for purchasing this CLARKE workstation. Before attempting to use this product, please read this

More information

Operating and Maintenance Instructions

Operating and Maintenance Instructions !! Operating and Maintenance Instructions Keep for future reference PTO400 Log Splitter 1 Index INDEX...2 SAFETY...3 LABELS..4 QUICK GUIDE including storage and transport... 5 IN DEPTH INSTRUCTIONS...

More information

PLANISHING HAMMER STAND OWNER S MANUAL

PLANISHING HAMMER STAND OWNER S MANUAL PLANISHING HAMMER STAND OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious

More information

DRILL BIT SHARPENER MODEL NO: CBS43 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0710

DRILL BIT SHARPENER MODEL NO: CBS43 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0710 DRILL BIT SHARPENER MODEL NO: CBS43 PART NO: 6480232 OPERATION & MAINTENANCE INSTRUCTIONS LS0710 INTRODUCTION Thank you for purchasing this CLARKE drill bit sharpener. Before attempting to use this product,

More information

MODEL NO. S400197N0. Owner s Manual ASSEMBLY & OPERATING INSTRUCTIONS

MODEL NO. S400197N0. Owner s Manual ASSEMBLY & OPERATING INSTRUCTIONS 3-POINT HITCH VERTICAL/HORIZONTAL LOG SPLITTER MODEL NO. S400197N0 Owner s Manual ASSEMBLY & OPERATING INSTRUCTIONS WARNING: All operators must read this manual before operating this log splitter. Follow

More information

Power Train Lift Max. Capacity: 1,250 lbs.

Power Train Lift Max. Capacity: 1,250 lbs. 655 EISENHOWER DRIVE OWATONNA, MN 55060 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223 FAX:

More information

Fisher 667 Diaphragm Actuator Sizes 30/30i 76/76i and 87

Fisher 667 Diaphragm Actuator Sizes 30/30i 76/76i and 87 Instruction Manual 667 Actuator (Size 30/30i - 76/76i and 87) Fisher 667 Diaphragm Actuator Sizes 30/30i 76/76i and 87 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...

More information

12mm (Max) 6mm (Max) 82mm (Max) 12mm (Max) 6mm (Max)

12mm (Max) 6mm (Max) 82mm (Max) 12mm (Max) 6mm (Max) 1 1 2 2 3 3 82mm (Max) 12mm (Max) 12mm (Max) 6mm (Max) 4 4 5 6 8 6mm (Max) 0.5 0mm 1 5 6 7 7 8 9 9 A = B 10 11 12 D B 1 13 14 15 0 C A D E 16 17 18 F G D B N H J G I K 19 A 20 G L 21 C K 1mm L M 1mm 22

More information

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880

More information

Operating Instructions and Parts Manual Folding Hydraulic Crane Model: JFHC-200X

Operating Instructions and Parts Manual Folding Hydraulic Crane Model: JFHC-200X This Manual is Bookmarked Operating Instructions and Parts Manual Folding Hydraulic Crane Model: JFHC-200X WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part No. M-106206K Ph.: 800-274-6848 Revision

More information

WARNING: Read these instructions before using the machine DOVETAIL JIG MODEL NO: CDTJ12 / CDTJ24 PART NO: ,

WARNING: Read these instructions before using the machine DOVETAIL JIG MODEL NO: CDTJ12 / CDTJ24 PART NO: , WARNING: Read these instructions before using the machine DOVETAIL JIG MODEL NO: CDTJ12 / CDTJ24 PART NO: 6462170, 6462175 OPERATION & MAINTENANCE INSTRUCTIONS LS0111 INTRODUCTION Thank you for purchasing

More information

General Safety and Maintenance Manual

General Safety and Maintenance Manual General Safety and Maintenance Manual 4 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 65H Series 4 H.P

More information

MINI RECIPROCATING SAW MODEL NO: CRS350M

MINI RECIPROCATING SAW MODEL NO: CRS350M CRS350M - Mini Reciprocating saw.fm Page 1 Thursday, November 22, 2012 9:41 AM MINI RECIPROCATING SAW MODEL NO: CRS350M PART NO: 6462550 OPERATION & MAINTENANCE INSTRUCTIONS LS1112 CRS350M - Mini Reciprocating

More information

Instruction Manual HPP-570 HBB-532 HBB-538

Instruction Manual HPP-570 HBB-532 HBB-538 Instruction Manual HPP-570 HBB-532 HBB-538 Read, understand and follow all safety instructions and operating procedures. If you do not understand the instructions or if conditions are not correct for proper

More information

General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS. and Thread RPM T1-5/8-11 X 1.9. Lever. Lever. Handle

General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS. and Thread RPM T1-5/8-11 X 1.9. Lever. Lever. Handle HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS 3 H.P HORIZONTAL GRINDERS Capacity: -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16,

More information

General Safety and Maintenance Manual

General Safety and Maintenance Manual General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 3 H.P HORIZONTAL

More information

HOME GYM Owner s Manual

HOME GYM Owner s Manual HOME GYM Owner s Manual Content Content-------------------------------------------------------------1 Safety precautions----------------------------------------------------2 Assembly instruction-------------------------------------------------3-12

More information

Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table

Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140780 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com Copyright

More information

Hedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) Operator s manual Manual d utalisation Manual de instrucciones

Hedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) Operator s manual Manual d utalisation Manual de instrucciones HÄcksaxtillsats HA110 HA850 Jonsered Hedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) GB FR ES Operator s manual Manual d utalisation Manual de instrucciones KEY TO SYMBOLS

More information

Hedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850.

Hedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850. Operator s manual Manual d utilisation Manual de instrucciones Hedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850. GB English FR ES

More information

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING CUT-OFF MACHINE

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING CUT-OFF MACHINE GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

1300-lb Furniture and Crate Movers

1300-lb Furniture and Crate Movers 1300-lb Furniture and Crate Movers Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK

VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK 31 SUN PAC BLVD. BRAMPTON ONTARIO L6S 5P6 PHONE: 866-501-5484 FAX: 905-458-5484 TABLE OF CONTENTS Specifications Page 1 Engine Assembly Page 2 5 Base Section

More information

PORTABLE PULLER 55 Ton Capacity

PORTABLE PULLER 55 Ton Capacity SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031

More information

T R I - S TA N D C H A I N V I S E

T R I - S TA N D C H A I N V I S E T R I - S TA N D C H A I N V I S E OWNER S MANUAL Item# 23235 WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other

More information

OPERATION AND MAINTENANCE MANUAL fervi.com Riveter for threaded inserts Art ORIGINAL INSTRUCTIONS

OPERATION AND MAINTENANCE MANUAL fervi.com Riveter for threaded inserts Art ORIGINAL INSTRUCTIONS OPERATION AND MAINTENANCE MANUAL Riveter for threaded inserts Art. 0469 ORIGINAL INSTRUCTIONS FOREWORD Read this manual before operation ORIGINAL INSTRUCTIONS Before starting any operation it is compulsory

More information

20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li

20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li 20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li PART NO: 6487020 OPERATION & MAINTENANCE INSTRUCTIONS LS1013 INTRODUCTION Thank you for purchasing this CLARKE 20V Cordless Reciprocating Saw. Before attempting

More information

Safety Instructions Manual Original Instructions - RRM2

Safety Instructions Manual Original Instructions - RRM2 Radius Roller RRM2 Safety Instructions Manual Original Instructions - RRM2 Safety Manual 1 General Operator and Supervisor Information Signal Word Definition Signal Word Panel 2 Shop Press Signal Word

More information

C-1116LMA - Automatic Stapler w/ Long Mag

C-1116LMA - Automatic Stapler w/ Long Mag C-1116LMA - Automatic Stapler w/ Long Mag MANUAL/WARNING: IMPORTANT PLEASE READ BEFORE USING TOOL Please read the following operating instructions manual. Refer to this manual for safety, adjustment and

More information

CV Control Valves Installation and Operation Manual

CV Control Valves Installation and Operation Manual CV00 - Control Valves Installation and Operation Manual Overview Warning: This bulletin should be used by experienced personnel as a guide to the installation of the Armstrong CV00 Control Valve. Selection

More information

MODELS 49 RA 49 RAZ 49 RAC

MODELS 49 RA 49 RAZ 49 RAC General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)

More information

SAVE THIS MANUAL IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY PRECAUTIONS. NOTICE is used to address practices not related to personal injury.

SAVE THIS MANUAL IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY PRECAUTIONS. NOTICE is used to address practices not related to personal injury. SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s serial number in the back of the manual

More information

HMP-200 BENDER INSTRUCTION SET

HMP-200 BENDER INSTRUCTION SET HMP-200 BENDER INSTRUCTION SET HMP-200 BENDER ASEMBLY INSTRUCTIONS STEP 1 STEP 2 BOLT LEFT SIDE PLATE TO BASE AS SHOWN WITH 1/2 x20 HEX BOLT & FLAT WASHER WELD BASE TO PLATE ON EACH SIDE NOTE: OFFSET HOLE

More information

VARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL

VARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL VARIABLE SPEED WOOD LATHE Model DB900 INSTRUCTION MANUAL 1007 TABLE OF CONTENTS SECTION...PAGE Technical data.. 1 General safety rules....1-3 Specific safety rules for wood lathe.....3 Electrical information.4

More information

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

MODEL T TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17)

MODEL T TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17) MODEL T1241 20-TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17) For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Identification

More information

VARIABLE SPEED WOOD LATHE

VARIABLE SPEED WOOD LATHE MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02

More information

Multi-Stand MSA 200. tritontools.com. Key Specifications. Selling Points

Multi-Stand MSA 200. tritontools.com. Key Specifications. Selling Points Multi-Stand MSA 200 Multi-purpose, adjustable support stand with extra-wide tripod base for excellent stability on level or uneven ground. Folds down in seconds for convenient transportation and storage.

More information

MANUAL PLASTIC STRAPPING TOOL MODEL P404

MANUAL PLASTIC STRAPPING TOOL MODEL P404 OPERATION MANUAL / SPARE PARTS LIST MANUAL PLASTIC STRAPPING TOOL MODEL P404 43.0404.02 43040402.en/MAS/ 12.05 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 TECHNICAL DATA 3 3 OPERATION ELEMENTS 4 4 ADJUSTMENT

More information

CARPET KNEE KICKER Model:CHT403 Part No:

CARPET KNEE KICKER Model:CHT403 Part No: CARPET KNEE KICKER Model:CHT403 Part No: 1801403 OPERATING & MAINTENANCE INSTRUCTIONS GC02/12 2 Please read these instructions carefully before using the tool Thank you for purchasing this CLARKE Carpet

More information

Angle Grinder MODEL 9553B MODEL 9555B

Angle Grinder MODEL 9553B MODEL 9555B ENGLISH Angle Grinder MODEL 9553B MODEL 9555B 006649 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

ELECTRIC SLIP ROLL MACHINE. Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0

ELECTRIC SLIP ROLL MACHINE. Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0 ELECTRIC SLIP ROLL MACHINE Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0 Operation Manual Table of contents I MAIN SPECIFICATION...2 II SAFETY INSTRUCTIONS.. 2 III OPERATION INSTRUCTIONS..4

More information

Universal Dowelling Jig Set

Universal Dowelling Jig Set Universal Dowelling Jig Set Model No: CDJ-2 Part No: 6462124 USER INSTRUCTIONS GC09/12 INTRODUCTION Thank you for purchasing this CLARKE Dowel Jig Set. Please read and follow the instructions carefully.

More information

Finger Jointer. Operating and Safety Instructions FJA300

Finger Jointer.  Operating and Safety Instructions FJA300 Finger Jointer FJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation

More information

S E L E C T I O N. Arm Curl. User manual

S E L E C T I O N. Arm Curl. User manual S E L E C T I O N T H E S T R E N G T H E V O L U T I O N User manual The identification plate of the and manufacturer, affixed behind the seat, gives the following details: A Name and address of the manufacturer

More information

WALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623

WALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623 WALK-BEHIND SPREADER 50 LB. CAPACITY Model 99623 Assembly, Operating, and Maintenance Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product

More information

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment. Attachment Tab Height: 16-1/2 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and

More information

Cyclone Upcut Cut off saw

Cyclone Upcut Cut off saw Cyclone Upcut Cut off saw Operation manual WARNING The operator must thoroughly read and understand this manual before operating the cut off saw or starting any servicing. All safety and warning instructions

More information

Instructions for Stone Cutting Machine

Instructions for Stone Cutting Machine Technical data Kg. Instructions for Stone Cutting Machine SCM600 3HP 2800rpm IP55 SCM800 3HP 2800rpm IP55 SCM1000 2800rpm IP55 SCM1200 2800rpm IP55 L=600 B=85(165) L=800 B=85(175) 500x510 0 or 45 600lt/h

More information

C-1650P 16 Gauge, 1/2 Medium Crown Stapler

C-1650P 16 Gauge, 1/2 Medium Crown Stapler C-1650P 16 Gauge, 1/2 Medium Crown Stapler MANUAL/WARNING: IMPORTANT PLEASE READ BEFORE USING TOOL Please read the following operating instructions manual. Refer to this manual for safety, adjustment and

More information

MN-ISHB-H131-E ISHB-H131 HYDRAULIC BRINELL HARDNESS TESTER OPERATION MANUAL

MN-ISHB-H131-E ISHB-H131 HYDRAULIC BRINELL HARDNESS TESTER OPERATION MANUAL MN-ISHB-H131-E www. insize. com ISHB-H131 HYDRAULIC BRINELL HARDNESS TESTER OPERATION MANUAL V0 Introduction ISHB-H131 Hydraulic Brinell hardness tester has the same structure as King Brinell hardness

More information

NUT SPLITTER. Max. Capacity: 15 Ton

NUT SPLITTER. Max. Capacity: 15 Ton Form No. 1000446 Parts List and Operating Instructions for: HNS150-TCC NUT SPLITTER Max. Capacity: 15 Ton NOTE: For a detailed parts list or to locate a Power Team Authorized Hydraulic Service Center,

More information

LOG SPLITTER MODEL NO: LOGBUSTER 5 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0714

LOG SPLITTER MODEL NO: LOGBUSTER 5 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0714 LOG SPLITTER MODEL NO: LOGBUSTER 5 PART NO: 3402030 OPERATION & MAINTENANCE INSTRUCTIONS LS0714 INTRODUCTION Thank you for purchasing this CLARKE Log Splitter. Before attempting to use this product, please

More information

3 POINT HITCH LOGSPLITTER

3 POINT HITCH LOGSPLITTER 3 POINT HITCH LOGSPLITTER OPERATOR S MANUAL AND PARTS LIST TABLE OF CONTENTS SECTION PAGE 1. GENERAL INFORMATION 1 2. SAFETY GUIDELINES 2 2.1 DEFINITIONS 2 2.2 SAFE OPERATING PROCEDURE 3 3. LOG SPLITTER

More information

MODEL 83 Pail Handler

MODEL 83 Pail Handler MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE

More information

Electric Chainsaw Sharpener

Electric Chainsaw Sharpener FPP CHAINSS Electric Chainsaw Sharpener Instruction Manual For your own safety, please ensure you have read these instructions before use and have fully understood all the safety guidelines. Specifications

More information

CONCRETE MIXER Models CCM125C & CCM126 Part Nos &

CONCRETE MIXER Models CCM125C & CCM126 Part Nos & CONCRETE MIXER Models CCM125C & CCM126 Part Nos. 3400840 & 3400842 OPERATING & MAINTENANCE INSTRUCTIONS 0607 Thank you for purchasing this CLARKE Concrete Mixer. Please read this leaflet thoroughly and

More information

C-W1650S 16 Ga, 1 Wide Crown Stapler

C-W1650S 16 Ga, 1 Wide Crown Stapler C-W1650S 16 Ga, 1 Wide Crown Stapler MANUAL/WARNING: IMPORTANT PLEASE READ BEFORE USING TOOL Please read the following operating instructions manual. Refer to this manual for safety, adjustment and trouble

More information

Portable System Owners Manual

Portable System Owners Manual Portable System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Adult Assembly Required. This manual, accompanied by sales receipt, should be saved and kept

More information

High Speed Air Turbine Handpiece

High Speed Air Turbine Handpiece OPERATION MANUAL High Speed Air Turbine Handpiece Please read this Operation Manual carefully before use and file for future reference. Handpiece should not be used with friction grip burs exceeding 18.5

More information

STRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved

STRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved 6002 STRINGING MACHINE OWNER'S MANUAL Issue 3 - June 20, 1998 Copyright 1998 GAMMA Sports - All Rights Reserved 6002 OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... FEATURES PAGE 3... ASSEMBLY

More information

Manual Carton Closing Staplers

Manual Carton Closing Staplers Operator s Manual Manual Carton Closing Staplers SHB00-A Item No. 6400 -/8" Crown Carton Closing Stapler 5/8" and /4" (5mm and 8mm) Ask for Genuine INTERCHANGE A58 and A4 Staples SHB50-C Item No. 640 -/4"

More information

SERVICE INSTRUCTIONS Model 9670 Lubricant Pump

SERVICE INSTRUCTIONS Model 9670 Lubricant Pump TM TM SERVICE INSTRUCTIONS Model 9670 Lubricant Pump 9670 DESCRIPTION Model 9670 Lubricant Pump is designed to pump light to heavy oils directly from the original container. This design features a 10:1

More information

FOR YOUR SAFETY: READ ALL INSTRUCTIONS CAREFULLY

FOR YOUR SAFETY: READ ALL INSTRUCTIONS CAREFULLY MODEL 2020F FOR YOUR SAFETY: READ ALL INSTRUCTIONS CAREFULLY Table of Contents General safety instructions for Power Tools 1 Main specification 2 Unpacking and checking contents 2 List of loose parts in

More information

Operating Manual 6 Industrial Bench Grinder ATBG280/

Operating Manual 6 Industrial Bench Grinder ATBG280/ Operating Manual 6 Industrial Bench Grinder ATBG280/6 804531 40 Year Australian Heritage The reputable name in bench grinders for 40 years Protect yourself and others by observing all safety information,

More information