Grinders & Stones. Oregon X Chain Grinder. Oregon Hydraulic Assist Chain Grinder ENGINEERING

Size: px

Start display at page:

Download "Grinders & Stones. Oregon X Chain Grinder. Oregon Hydraulic Assist Chain Grinder ENGINEERING"

Timothy Potter
6 years ago
Views:

Grinders & Stones For fast accurate chain sharpening, this well designed and constructed 220/240v electric chain grinder is ideal for workshop use and suitable for all chain pitches

Oregon X Grinder Self centering Faster grinding Optimum grind geometry Enhanced chain performance Large ergonomic handle with release button Built in lamp for better visibility Torsion

1mm Pitch 1/4 to 3/4 GRD22B 519789 Oregon Hydraulic Assist Grinder Bench mounted chain grinder with a hydraulically assisted clamping system - this can cut down sharpening time by 50%.

1 Grinders & Stones For fast accurate chain sharpening, this well designed and constructed 220/240v electric chain grinder is ideal for workshop use and suitable for all chain pitches and types. The state-of-the-art vice design provides up to 15% time saving compared to traditional grinders. Oregon X Grinder Self centering Faster grinding Optimum grind geometry Enhanced chain performance Large ergonomic handle with release button Built in lamp for better visibility Torsion spring for comfort grinding Supplied complete with three grinding wheels (3.2, 4.7 & 6mm) Gauge 1.1mm > 3.1mm Pitch 1/4 to 3/4 GRD22B Oregon Hydraulic Assist Grinder Bench mounted chain grinder with a hydraulically assisted clamping system - this can cut down sharpening time by 50%. Sharpens precisely every time enhancing chain performance. Large ergonomic handle with release button Built in lamp for better visibility. Torsion spring for comfort grinding Rugged and reliable Withstands periods of extended use Includes 3 sizes of grinding stones 5/32, 3/16 & 7/32 Gauge 1.1mm > 3.1mm Pitch 1/4 to 3/ GRD22B Page 1

on damaged cutters - without burning Best stone for automatic machines 16mm &

d. for Markusson Machines Markusson Diamond Dressing Wheel Markusson Borazon

2 s TM Easy Selection Guide... s.404 s Fine grit, long lasting Can burn cutters under heavy cuts Good for polishing and light cuts Manual machines only 22mm i.d. fitting For.404 Pink i.d. 22mm GRD22P Medium / Coarse grit Good working life Superior stone for heavy cuts on damaged cutters - without burning Best stone for automatic machines 16mm & 22mm i.d. fitting For.404 Blue i.d. 16mm GRD16B i.d. 22mm GRD22B 22mm i.d. for Oregon Machines 16mm i.d. for Markusson Machines Markusson Diamond Dressing Wheel Markusson Borazon Discs Dressing Stones Ideal for simple hand dressing and cleaning of grinding stones to the desired profile. MDS20 MDW-50 Pressed gently against the grinding disc for only a few seconds, this diamond impregnated wheel ensures a perfect profile - every time. MDS25 i.d. 16mm MBD-16 i.d. 22mm MBD-22 Lasting many times longer than ordinary grinding discs and producing little grinding dust, the stainless steel disc incorporates bonded superabrasive Boron Nitride crystals. This improves grinding finish and maintains profile shape for a superior ground chain. Discs are 145mm outside diameter x 5mm thick. Page 2

& Bar Grinders Markusson & Bar Grinder Semi-Automatic Sharpening For saw MG-LBG A

grinders to offer the complete bar and chain service.

and long working life of drive sprockets, bar rails and nose sprockets, the drive

The Markusson Drive Link Grinder is a fast, efficient solution to the smooth

Fitted with twin link grinder discs combined with a standard grinding wheel, this is

The Sematic offers an economical solution for the sharpening of chainsaw chains.

3 & Bar Grinders Markusson & Bar Grinder Semi-Automatic Sharpening For saw MG-LBG A combination machine to grind the harvester chain drive link sides, the harvester bar rail edges and harvester bar groove. The Markusson & Bar Grinder offers the perfect partner machine to Markusson chain grinders to offer the complete bar and chain service. without stand MG-SA Markusson Drive Link Grinder MDLG125G To ensure smooth running and long working life of drive sprockets, bar rails and nose sprockets, the drive links of the chain must be kept in good order. The Markusson Drive Link Grinder is a fast, efficient solution to the smooth polishing of chain drive links. Fitted with twin link grinder discs combined with a standard grinding wheel, this is the ultimate chain maintenance tool. The Sematic offers an economical solution for the sharpening of chainsaw chains. Available with or without a stand, the Sematic is a semi-automatic machine, similar in design and construction to the fully automatic Markusson grinders but without the automatically swivelling grinding head facility, with stand MG-SAS For saw Stones & Wheels Twin Grinding Discs DLG125D Grinding Wheel DLG125W Page 3

Automatic Sharpening The Markusson Grindomatic V12 automatically sharpens all the teeth of a chain, without any need for manual adjustment, by means of an oscillating grinding head.

The V12 can grind up to 3mm from cutters in one grinding operation, saving time in sharpening extremely damaged chains.

* * Estimate, depending on the grinding required.

4 Automatic Sharpening The Markusson Grindomatic V12 automatically sharpens all the teeth of a chain, without any need for manual adjustment, by means of an oscillating grinding head. The V12 grinder is simple and reliable in operation, fully automatic and produces an extremely sharp cutting edge. The V12 can grind up to 3mm from cutters in one grinding operation, saving time in sharpening extremely damaged chains. s sharpened by the V12 can still be filed by normal chainsaw files, the V12 does not damage the hardness or glaze the surface of cutters. Approximate production rate - 12 chains per hour.* * Estimate, depending on the grinding required. Grindomatic V12 Markusson Grindomatic V12 without stand MG-V12 Markusson Grindomatic V12 with stand MG-V12-S The V12 takes two grinding strokes to each cutter, a first grinding cut and a second polishing operation. The V12 Grindomatic can grind chains at angles from 0 to 35 and sharpen harvester, chainsaw and sawmill machine chains. The V12 Grindomatic can be operated by a 12v or 230v electrical supply with converter and can be supplied with or without stand. GRD16B Grindomatic V12 with chain tensioner with stand MG-V12-SCT The automatic compressed air tensioner stretches out the chain, tensioning it during the grinding operation, to straighten out sticking and seized links. THE ULTIMATE AUTOMATIC CHAIN SHARPENING MACHINE Page 4

Automatic Sharpening Link Counter Link Counter 3/4 HIGH VOLUME PROFESSIONAL CHAIN GRINDERS GRD16B Markusson Combimatic with stand MG-C34-SCT Combimatic Fully automatic sharpening machine for 3/4,, 0.

5 Automatic Sharpening Link Counter Link Counter 3/4 HIGH VOLUME PROFESSIONAL CHAIN GRINDERS GRD16B Markusson Combimatic with stand MG-C34-SCT Combimatic Fully automatic sharpening machine for 3/4,, and 3/8 saw chains. Link counter as standard Individually adjustable speed setting to enable grinding a 3/4 cutting link in one operation, without it turning blue. Adjustable depth centering at the grinding head, easily set. Very high grinding capacity. Simple to use and easy to adjust. Grinding angle easily adjusted between 0 and 35. Enables easy grinding of, for example, sawmill machine chains and depth gauge. Power supply: 12V DC or 230V AC with converter. tensioner stretches out the chain and straightens out sticking links in the chain assembly. The Triplematic automatic sharpening machine from Markusson grinds at three different places on the cutting link and additionally touches the cutting edge three times in the process for razor sharp cutting. The Triplematic operates as a normal grinder when it starts to grind the cutting edge - the unique feature is that it also widens the gullet so the chain gets a higher chip flow and thus improves cutting performance. Additionally it grinds the depth gauge. Depth gauge setting is fully automatic but can be set manually. Link counter as standard. Custom speed adjustment to enable grinding of cutting edge in one action. Adjustable depth centering at grinding head. Very high grinding capacity. Grinding angle is easily adjusted between 0 and 35. Power supply: 12V DC or 230V AC with converter. tensioner stretches out the chain and straightens out sticking links in the chain assembly. Markusson Triplematic with stand Triplematic MG-T350-SCT SHARPENS CHAINS LIKE NEW... EVERY TIME Page 5

ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials

ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness.