HARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK
|
|
- Julia Sharp
- 6 years ago
- Views:
Transcription
1 HARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK
2 HARDWARE SPECIFICATION KEY 1. DOOR/DRAWER PULLS 2. HINGES 3. DRAWER SLIDES 3A. DRAWER SLIDES 3B. FILE DRAWER SLIDES 4. LOCKS 4A. DRAWER LOCKS 4B. SINGLE DOOR LOCKS 4C. DOUBLE DOOR LOCKS 5. SHELF SUPPORTS 5A. SEMI-EXPOSED SHELVES 5B. EXPOSED SHELVES 6. ELBOW CATCH 7. CLOSET ROD & FLANGE 8. MAGNETIC CATCH 9. FILE DRAWER HARDWARE 10. WARDROBE LOCK 5b 7 5a 4c 6 1 3a 8 9 4b 4a b 1
3 1. DOOR/DRAWER PULL - 4 WIRE PULL Overall Length: 4-5/16" Mounting Holes: 4" center to center. Projection: 1-1/4" Material: Steel with Satin Chrome Finish 2. HINGE STYLE Concealed: BLUM 120+ European style all metal hinge with nickel plating. 3 dimensional adjustment. Advantage Five Knuckle Hinge: Opening angle of 270 degrees. Powder-coated matte nickel finish. 3. DRAWER SLIDES 3a. Standard Drawer Slide: 100# full extension, heavy-duty slide. Steel ball bearings. 3b. File Drawer Slide: 150# heavy-duty slide. 1.5" over travel. Steel ball bearings. 4. LOCKS CompX Timberline Cam Lock: Removable lock core. Nickel finish. 5. ADJUSTABLE SHELF SUPPORTS Semi-exposed Shelf Supports: Clear plastic institutional clip for 3/4" and 1" material. Mounts in 5mm holes, 32mm on center. Exposed Shelf Supports: 5mm spoon shaped supports. Nickel finish. 6. ELBOW CATCH Solid brass, chrome plated. Spring loaded. Used on non-locked door in double door cabinets. Attaches to fixed cabinet member. 7. CLOSET ROD & FLANGE Flange: Closed flange for 1-1/16" diameter rod. Metal with chrome finish. Rod: 1-1/16" diameter. Metal with chrome finish. 8. MAGNETIC CATCH White plastic catch body. Holding power approximately 4-5 kg. Use with free swinging hinges. 9. FILE DRAWER HARDWARE Hanging File Rail: Snaps onto 1/2" drawer sides. No glue or staples required. Use with clips and cross rails to accommodate different sized drawers and files. Hanging File Rail Clip: Hangs over hanging file rail. Hanging File Cross Rail: Fits in clip. 10. WARDROBE LOCK CompX Timberline System 260. Utilizes lockbar and strike plates. HARDWARE OPTIONS (additional cost) 1. Any pull 2. Blum 170, Blum Soft Close, RPC Five Knuckle 3. Metabox, Tandem, Tandem Box, Accuride, KU 4. (Brand) Pin Tumbler, Gang Locks 5. Recessed Pilaster KU-255 w/256 clips, Lazy Susan, Trash Pull Out, etc
4 BASE PRODUCT CABINETS SPECIFICATIONS BRIGHTLINE CASEWORK PRODUCT SPECIFICATIONS PART ONE GENERAL DEFINITIONS 1. Exposed Surfaces: Surfaces less than 72 above the finished floor that are visible after installation. 2. Semi Exposed Surfaces: Surfaces that become visible after opening doors, drawers or bottoms of cabinets that are between 30 and 42 above the finished floor. 3. Concealed Surfaces: Surfaces not visible after installation or bottoms of cabinets that are less than 30 above the finished floor or tops of cabinets that are more than 72 above the finished floor. PRODUCT HANDLING 1. Delivery of product only after the building is climate controlled with ambient temperatures no more than 0 degrees and relative humidity between 25 percent and 55 percent. 2. Proper storage includes protection from abrasive materials and construction activities. 3. We are responsible for the safe packaging and shipment of materials that travel via our equipment or on prepaid freight. 4. Shipping claims on products shipped freight collect or on customer s account are not guaranteed. Any damage claims in this instance must be filed with the carrier. WARRANTY 1. All products are guaranteed to be compliant with Custom Grade or better as set forth in the Architectural Woodwork Institute Quality Standards. 2. We agree within one (1) year after delivery date, to repair or replace without charge any product, which is defective within the meaning of this guarantee. 3. All products must be inspected upon arrival and all claims or complaints must be filed before additional work is done to the product. We do not agree to be responsible for any work, which was not originally performed by us Windgap Ave., Bldg. 20 Pittsburgh, PA TEL (412) FAX (412)
5 BASE PRODUCT CABINETS SPECIFICATIONS BRIGHTLINE CASEWORK PRODUCT SPECIFICATIONS PART TWO STANDARD CONSTRUCTION 1. Core material is Industrial grade M2 Particleboard, CARB 2, 45 lb. density 2. Exposed surfaces are clad in Brightline thermoplastic laminate with white laminate backer 3. Semi exposed surfaces are white melamine 4. Decorative Color Selections a. BRIGHTLINE Thermoplastic Laminate - Solid Colors b. BRIGHTLINE Thermoplastic Laminate - Wood Grains c. BRIGHTLINE Custom Color Thermoplastic Laminate 5. Hardwood doweled joinery 6. 1/4" Fully recessed back, mechanically fastened and glued 7. 3/4" thick full depth shelves 32" or less in width. 8. 1" thick full depth shelves over 32" wide. 9. Shelves are banded are all edges 10. Cabinet edges.020 PVC 11. Five piece drawer box, 1/2" melamine with 1/4" fully recessed bottoms PART TWO 12. Drawer box banded all edges 13. 3/4" Stretchers between drawers 14. Integral kicks with 3 recess unfinished HARDWARE 1. Hinges, concealed 110 degree self-closing, clip on for quick release 2. Optional 270 degree 5-knuckle institutional grade hinges with hospital tips 3. 4" wire pull satin chrome finish. 4. 5mm pin style shelf clips 5. Full extension, 100lb slides 6. Cabinet metal hanging rail and adjustable mounting hardware 4075 Windgap Ave., Bldg. 20 Pittsburgh, PA TEL (412) FAX (412)
6 4075 WINDGAP AVE., BLDG. 20 PITTSBURGH, PA TEL (412) FAX (412) November,
CaseworkUSA. specifications. 1.1 General 1.2 Summary. 1.3 Related Sections. 1.4 Definitions. 1.5 Qualifications and Quality Assurance
1.1 General 1.2 Summary A. This section includes the following Scope of Work as referred to in the plans: 1. Plastic laminate manufactured casework 2. Plastic laminate countertops 1.3 Related Sections
More informationCascade Ph: Casework Fax: Corp
Cascade Ph: 541-928-3750 Casework Fax: 541-928-3880 Corp email: bill.yates@cascase.com Cascade Casework Corp SPECIFICATIONS FOR PLASTIC LAMINATE FACED CASEWORK Specifications Section 12300 Section 06400
More informationContents. E-Line Series (Wood Casework) K-Line Series (Wood Casework) D-Line Series (Wood Casework)
WOOD CABINET LINES Contents E-Line Series (Wood Casework)... 2-3 K-Line Series (Wood Casework)... 4-5 D-Line Series (Wood Casework)... 6-7 L-Line Series (Wood Casework)... 8-9 M-Line Series (MDF Casework)...
More informationSECTION MANUFACTURED CASEWORK
1 GENERAL 1.1 SECTION INCLUDES SECTION 12300 MANUFACTURED CASEWORK A. Work required to complete the manufactured casework indicated by the Contract Documents, and the items necessary for its proper installation.
More informationAddendum. McKee and Associates Architecture and Interior Design. No. ONE Date: Project:
McKee and Associates Architecture and Interior Design Addendum No. ONE Date: 10.8.18 Project: A New Office for Gaston Elementary School for The Etowah County Board of Education Gadsden, Alabama A1.1 GENERAL
More informationMusic Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance
1.00 General 1.01 Summary Music Area Casework A. This section includes the following Scope of Work as referred to in the plans: 1. Thermally Fused Laminate manufactured casework, for use in music areas,
More informationSECTION LAMINATE CLAD CASEWORK - COMMERCIAL
SECTION 123400 LAMINATE CLAD CASEWORK - COMMERCIAL PART 1 GENERAL 1.01 SECTION INCLUDES A. Fixed modular laminate clad casework and components. B. Flexible rail mounted laminate clad casework and components.
More information1. Division 6 Section "Rough Carpentry" for furring, blocking, and other carpentry work that is not exposed to view.
SECTION 06402 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More informationMANAGED CARE QUICK CABINETS
Clinton Managed Quick Care Cabinets are the quickest and most economical way to get quality cabinets for office, clinic or exam rooms. Clinton cabinets ship in pre-assembled units and are easy to install.
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK. A. Section includes interior woodwork items indicated not specified elsewhere and as specified.
SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section includes interior woodwork items indicated not specified elsewhere and as specified. B. Options: 1. Where casework
More informationC. Installation shall be by experienced carpenters. Coordinate with plumbing and electrical contractors.
12300 - MANUFACTURED CASEWORK PART 1 - GENERAL 1.01 STIPULATIONS A. The specifications sections General Conditions, Special Requirements, and General Requirements form a part of this section by this reference
More informationSECTION PLASTIC LAMINATED CASEWORK
Specifications SECTION 123400 PLASTIC LAMINATED CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES This section provides the guidelines and standards for the manufacturing of plastic laminated casework and
More informationThe Siena Collection Catalog Pricelist Effective January 2018
Catalog Pricelist 474.06 Effective Bedside Units Product Features 3/4 laminate case with sturdy dowel construction High Pressure Laminate top, door and drawer fronts with matching interiors Full 3/4 back
More informationPlastic Laminate Casework
Plastic Laminate Casework Casework Contents Cover Letter... 3 Specifications... 4-13 Cabinet Construction... 14-27 Hardware... 28-38 Base Cabinets... 29-63 Tall Cabinets... 64-88 Wall Cabinets... 89-116
More informationWood Casework Construction Details
CASEWORK CONSTRUCTION DETAILS Overview Cabinets Mott casewk can meet the most demanding specification, whether it is AWI Premium an architect's 'signature' specification. We manufacture using premium grade
More informationCustom Millwork Fabrications
Custom Millwork Fabrications Laminate Casework Lab Casework Excellence To experience quality craftsmanship and service excellence, choose Northwest Cabinets, Inc. for all of your custom casework manufacturing.
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More information***************************************************************************************************************
06400 ARCHITECTURAL WOODWORK SPECIFIER: CSI MasterFormat 2004 number 06 40 00 PART 1 GENERAL 1.1 SUMMARY A. Provide necessary services, tools, equipment, material, and labor required to furnish and install
More informationENTRÉ E : CABINETS FOR LIFE. Our stock cabinetry line with fast delivery and the fine styles and finishes you demand. DOOR STYLES 4-7 ACCESSORIES 8-11
ENTREE : CABINETS FOR LIFE Our stock cabinetry line with fast delivery and the fine styles and finishes you demand. DOOR STYLES 4-7 ACCESSORIES 8-11 KEEP IT GREEN! 12 ADA COMPATIBLE 12 EXTRA BENEFITS 13
More informationADDENDUM TO THE CONTRACT. for the GLACIER FIRE STATION KITCHEN AND CLASSROOM RENOVATION. Contract No. E16-181
ADDENDUM TO THE CONTRACT for the ENGINEERING DEPARTMENT GLACIER FIRE STATION KITCHEN AND CLASSROOM RENOVATION Contract No. E6-8 ADDENDUM NO.: ONE CURRENT DEADLINE FOR BIDS: May 9, 206 PREVIOUS ADDENDA:
More informationSECTION CUSTOM MILLWORK
PRT 1 GENERL 1.01 SECTION INCLUDES SECTION 06 41 00 Shop-fabricated plastic laminate-clad cabinet units. B. Countertops. C. Cabinet hardware. 1.02 SUBMITTLS See Section 01 30 00 -dministrative Requirements,
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK
SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Laminate clad cabinets and custom components. B. Laminate clad countertops. C. Cabinet hardware including countertop
More informationSECTION PRE-MANUFACTURED CABINETS
SECTION 12390 PRE-MANUFACTURED PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. The work includes furnishing all labor, materials and equipment required to complete the Pre-Manufactured Cabinet work as shown
More informationSECTION ARCHITECTURAL WOODWORK. B. Related Sections: 1. Section Paints and Coatings: Field applied painted finishes.
PART 1 - GENERAL 1.1 SUMMARY SECTION 06 40 00 A. Provide architectural woodwork as shown and specified. Work includes: 1. Providing plastic laminate finished casework. 2. Providing plastic laminate clad
More informationMounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20
Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal
More informationA. This Section includes factory fabricated modular casework.
SECTION 12300 MODULAR CASEWORK PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification Sections,
More informationSPECIFICATIONS: Red Oak Veneer Casework as manufactured by Mastercraft Woodworking Co., Inc.
SPECIFICATIONS: Red Oak Veneer Casework as manufactured by Mastercraft Woodworking Co., Inc. These specifications contain certain optional selections, which must be made by the specification developer.
More informationB. American Society for Testing and Materials (ASTM):
SECTION 06400 ARCHITECTURAL WOODWORK PART 1 GENERAL 1.01 SUMMARY A. Provide necessary services, tools, equipment, material, and labor required to furnish and install millwork and cabinet work. Install
More informationSECTION CUSTOM CABINETS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Specially fabricated cabinet units. B. Countertops. C. Cabinet hardware. D. Preparation for installing utilities. 1.02 RELATED REQUIREMENTS SECTION 06410 - A. Section
More informationTechnical Product Description
Worktops 5. Thickness material structure Front edge Bottom face coating 40 mm, 50 mm Laminate according to standard: EN 438 Wood pore or relief, matt or gloss 2 x Radius 3 mm, 6 mm or 8 mm depending on
More informationROWAN COUNTY AIRPORT APRIL 2017 TERMINAL EXPANSION
SECTION 12300 - MANUFACTURED CASEWORK PART 1 - GENERAL RELATED DOCUMENTS: Drawings, General Conditions and Supplementary General Conditions and other Division-1 Specification Sections, apply to this Section.
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK
SECTION 06402 - INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More informationAlexandra Secondary College Refurbishment Project No: 1507 SECTION MANUFACTURED CASEWORK - SHOP BUILT 12300/1
SECTION 12300 MANUFACTURED CASEWORK - SHOP BUILT 12300/1 PART I GENERAL 101 Scope The work of this Section covers the supply and installation of manufactured casework items. It includes but is not limited
More informationSECTION ARCHITECTURAL WOOD CASEWORK
SECTION 06410 - ARCHITECTURAL WOOD CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Wood cabinets for opaque finish. B. Flush wood paneling for transparent finish. C. Factory finishing. 1.02 RELATED REQUIREMENTS
More informationProduct Guide Specification
RYNONE March 2, 2011 North Thomas Avenue, PO Box 128, Sayre, Pennsylvania 18840 P: (570) 888-5272 F: (570) 888-1175 W: www.rynone.com Product Guide Specification Specifier Note: This product guide specification
More informationAIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS
AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage... 1 Repairing Paint Scratches...1 BASE CABINETS... 2 Drawer Removal and Reinstallation...2 Replacing Drawer
More informationModular Laminate Casework Specifications
Modular Laminate Casework Specifications Labscape Modular Laminate Specifications 1.01 GENERAL PROVISIONS A. Applicable provisions of General Conditions, Special Conditions, and General Requirements shall
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationSteele TV Stand Stock # BH
LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationSECTION LABORATORY CASEWORK AND EQUIPMENT
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 12 35 53 LABORATORY CASEWORK AND EQUIPMENT A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More information35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate
35mm 110 Deg. Concealed Hinge with Mounting Plate Most economical of our 35mm concealed hinges. 386 41102 00 386 41102 08 386 41102 15 Slide-on Full overlay Self Closing Slide-on Half overlay Self Closing
More informationAlcove Room Solutions. Features. Contemporary design and clever features support modern style living
Contemporary design and clever features support modern style living. Features Bed, Bed Wing Panels, Shelf Headboard, footboard and wing panels are 1" hardwood veneer plywood. A fixed pattern of holes provide
More informationProduct Guide Specification
Shield Casework February 2014 3421 Merriam Lane Overland Park, Kansas 66203 Phone 913-744-2183 Fax 913-384-3477 Website www.shieldcasework.com E-mail info@shieldcasework.com Product Guide Specification
More informationKESWICK DESIGN CHANGES EVERYTHING. English Cherry Finish
KESWICK V E N E E R / L A M I N A T E C O L L E C T I O N DESIGN CHANGES EVERYTHING 7990 English Cherry Finish K E S W I C K VENEER / LAMINATE COLLECTION 7990 Traditional Styling - Decorative wood accent
More informationWidth Height Depth White Antique White Secret Candlelight Cognac Mahogany Coco Chocolate Unit Price 16
Don t forget to order your door and drawer sets for your cabinets. base cabinets 3160.000.00 3160.000.07 3160.000.01 3160.000.09 3160.000.06 3160.000.04 3160.000.08 3160.000.03 $330.00 26 23 3175.000.00
More informationKnobsandPulls.com. Presents. A Simplified Approach to Building Cabinets Using the 32mm System
KnobsandPulls.com Presents the KISS II system. A Simplified Approach to Building Cabinets Using the 32mm System Available online at www.cabsystems.com Revised September 2007 by Joel Ketner or www.kissii.com
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationTender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Finish carpentry items including shop prefabricated casework and countertops..2 Hardware and attachment accessories..3 Wood Benches..4
More informationTransition Range Installation, Care & Adjustment Instructions
Introduction The following instructions will enable you to complete the final assembly and adjustment of your new furniture. Hardware Box Each of the cabinets contains a Hardware box that contains all
More informationTechnical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard
Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.
More informationSECTION WOOD ARCHITECTURAL CABINETS AND LAMINATE COUNTERTOPS
SECTION 064113- WOOD ARCHITECTURAL CABINETS AND LAMINATE COUNTERTOPS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationINSTALLATION GUIDE FOR METAL LABORATORY CASEWORK
LABORATORY Casework & Cabinets INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK RDM Industrial Products, Inc. RDM LAB CABINET INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage...1
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationBeechwood. bedroom collection. saudereducation.com
Beechwood bedroom collection saudereducation.com 2 1 3 1. Beechwood Wardrobe 9144716 2. Beechwood 4-Drawer Chest 9135042 3. Beechwood Panel Bed 9116704 4. Beechwood Nightstand 9135541 Beechwood Handle
More informationToilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
More informationKESWICK DESIGN CHANGES EVERYTHING GSA * English Cherry Finish
KESWICK V E N E E R / L A M I N A T E C O L L E C T I O N DESIGN CHANGES EVERYTHING GSA * 7990 English Cherry Finish K E S W I C K VENEER / LAMINATE COLLECTION 7990 Traditional Styling - Decorative wood
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationDesigned for Your Convenience
Table of Contents Intro & Blum Drawer Box Adjustments Removing Drawer Alignment Dimensions Glide Adjustments Front Adjustments Hinge Adjustments Removing s Full Overlay Inset Concealed (CH) Inset Revealed
More informationSECTION 12345.1 - MODULAR STEEL LABORATORY CASEWORK 1 PART 1 PRODUCTS 1.01 MANUFACTURER A. Casework and equipment manufacturer: ALIR Systems, Inc., 245 Harrison St, Jamestown, New York, 14701. 1.02 CASEWORK
More informationDOREL ASIA DESK, HUTCH & CHAIR. Lot number: Date of purchase: / /
DOREL ASIA DESK, HUTCH & CHAIR Model No. : WMP-DC (White) WMP-DC (White) WMEP-DC (Espresso) WMEP-DC (Espresso) UPC CODE: 0-6585-50-8 (White) 0-6585-50-5 (White) 0-6585-565- (Espresso) 0-6585-565-9 (Espresso)
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
More informationB. Section Rough Carpentry: Support framing, grounds, and concealed blocking.
SECTION 06 41 00 - ARCHITECTURAL WOOD CASEWORK PART 1: GENERAL 1.1 SECTION INCLUDES A. Specially fabricated cabinet units. B. Cabinet hardware. C. Factory finishing. 1.2 RELATED REQUIREMENTS A. Division
More informationSteel Casework Construction Details
CASEWORK CONSTRUCTION DETAILS Overview Cabinets Each cabinet is fabricated from prime quality furniture grade cold rolled type 304-4 316-4 stainless steel. All components are die fmed, notched, keyed and
More informationEDUCATOR SERIES. Wood Casework Solutions For Life. Learning. Discovery.
EDUCATOR SERIES Wood Casework Solutions For Life. Learning. Discovery. Always True to Your Vision. CiF Lab Solutions Experience Commitment to Excellence With decades of experience in manufacturing premium
More informationSECTION PLASTIC-LAMINATE-FACED ARCHITECTURAL CABINETS
SECTION 064116 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Plastic-laminate-faced architectural cabinets. 2. Wood furring, blocking, shims, and hanging strips for installing plastic-laminatefaced
More informationWestwood Room Solutions
With an extensive product line that covers bedroom, living spaces, office and more, Westwood offers stylish storage with a clean design. The classic beauty of solid wood construction provides strength
More informationJan H: ARCHITECTURAL WOODWORK (06410-H)
2101 Commonwealth Blvd, Suite B Ann Arbor, MI 48105-5759 www.med.umich.edu/facilities/plan/ 064040-H: ARCHITECTURAL WOODWORK (06410-H) GENERAL In general, follow the guidelines below when designing and
More informationSOLO Concealed Runners for wood drawers
SOLO Concealed Runners for wood drawers Perfecting motion Table of contents Application Chart Drawer Thickness Cabinet type Load Capacity 5/8" 3/4" Frame Panel Dynamic Static Page SOLO 262H 75 lb. 100
More informationSliding Door System Terra ST.1060.TE
Sliding Door System Terra ST.1060.TE BASIC SYSTEMS SLIDING SCHIEBETÜRSYSTEM DOOR SYSTEM PROTEC TERRA Sliding Door System TERRA ST.1060.TE 2 3 BASIC SYSTEMS SLIDING DOOR SYSTEM TERRA Sliding Door System
More informationArchitectural Woodwork Standards. casework. s e c t i o n
Architectural Woodwork Standards casework s e c t i o n SECTION Introductory INFORMATION Guide Specifications...284 Introduction...285 Categories...285 Wood...285 Decorative Laminate...285 Solid Phenolic...285
More informationWHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK
WHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK Accessories. We believe that functionality is at the heart of any great kitchen. Above are a few of the accessories available with Merillat Essentials. The
More informationD. Product Certificates: Signed by manufacturers of casework certifying that products furnished comply with requirements.
SECTION 12356 - CASEWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationDistributed by FERMAWOOD CABINETRY
Presents MADE IN USA Distributed by FERMAWOOD CABINETRY www.fermawoodcabinetry.com sales@fermawoodcabinetry.com 83 Mayfield Ave., Edison, New Jersey 08837 Toll Free: 1-877-FERMA-28 Toll FreeFAX: 1-888-900-0686
More informationEnglish Cherry Finish
K E S W I C K V E N E E R C O L L E C T I O N 7990 English Cherry Finish K E S W I C K 7990 / VENEER 2 Traditional Styling - Decorative wood accent mouldings, recessed modesty panels, and decorative, plated
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Rough
More informationAlcove Room Solutions. Contemporary design and clever features support modern style living. Features. Bed, Bed Wing Panels, Shelf
Contemporary design and clever features support modern style living. Features Bed, Bed Wing Panels, Shelf Headboard, footboard and wing panels are 1" hardwood veneer plywood. A fixed pattern of holes provide
More informationCABINETRY Assembly Instructions
www.hdicabinetry.com Assembly Instructions TABLE OF CONTENTS Category Page(s) Section 1: Framed Series Base Cabinet Instructions Wall Cabinet Instructions Easy Reach Cabinet Instructions 1.01-1.04 1.05-1.06
More informationDIVISION 11 EQUIPMENT SECTION PHOTO DARKROOM CASEWORK
DIVISION 11 EQUIPMENT SECTION PHOTO DARKROOM CASEWORK PART 1 GENERAL 1.01 Scope of Work A. Provide material, accessories, tools, equipment and labor as required for the complete fabrication and installation
More informationKLOPPENBERG Quality is the Best Buy Furniture
Furniture Standard Bed Product Specifications Body: Frame: 5/8 Thick Interchangeable Panels 16 ga 1 ½ Type 304 tubular stainless steel with adjustable foot inserts, fully welded and polished joints Unit
More informationFurniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
More informationWELLNESS CENTER REMODEL UNIVERSITY OF CALIFORNIA, MERCED MERCED, CALIFORNIA PROJECT NO.: 907432 C. Solid Surfacing Material: 1. Manufacturers: D. Wood: a. First Floor; Wilsonart International, Solid Surfaces,
More informationSSI CASEWORK CATALOG E. Second Avenue P.O. Box 76071, Tampa, Florida WOOD FAX:
SSI CASEWORK CATALOG 1307 E. Second Avenue P.O. Box 76071, Tampa, Florida 1-800-922-WOOD 813-247-4429 FAX: 813-248-5046 www.s-scraftsmen.com SSI CASEWORK CATALOG 1307 E. Second Avenue P.O. Box 76071, Tampa,
More informationPALLETIZATION See page 3.
PRAXIS SIN-71-315 Front CHARACTERISTICS Modular Wall Storage System Open and Enclosed Storage Wardrobe Coat Rod Options Small, Medium and Large Drawers 4 Drawer/Door Options Adjustable Floor Glides Fixed
More information1. Division 6: Rough carpentry, blocking within walls to adequately support casework. 2. Division 9: Furnishing and installation of base molding.
SECTION 12 32 00 - WOOD LABORATORY CASEWORK PART 1: GENERAL 1.1 SUMMARY A. Section Includes: 1. Wood Casework. Furnish all cabinets and casework, including tops, ledges, supporting structures, and miscellaneous
More informationGENERAL SPECIFICATION
GENERAL SPECIFICATION PART 1 GENERAL 1.1 SUMMARY A. Related Documents: 1. Drawings and provisions of the contract including General Conditions Supplementary Conditions and Division 1, apply to this section.
More informationStorage Cabinets SYSTEMS FOR SUCCESS
Storage Cabinets Storage Cabinets Are Not All Created Equally If you thought storage cabinets were all the same, think again. Tennsco storage cabinets offer a real difference. Whether your application
More informationWARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND
SIMP II H O M E L I F E Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND 1/21 FOR REPLACEMENT PARTS OR HELP WITH ASSEMLY PLEASE CONTACT US AT: simpli-home.com/customer-support PLEASE ENSURE
More informationDisplay/Accessory Furniture
1 Multimedia Display End-of-Range, 60-013-S00 End-of-range displayer has five 59 1 /2" 19 3 /8" 16" 163 Sloped Shelving Book Displayer sloping shelf spaces for displaying books spine out at an angle for
More informationA. This Section includes interior architectural woodwork items indicated on Drawings and specified in this Section.
SECTION 064023 - INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. This Section includes interior architectural woodwork items indicated on Drawings and specified in this Section. 1.2 DEFINITIONS
More informationModels 2230 and 2240
Models 2230 and 2240 Overview... 2 Tools Needed... 2 Hardware...3 Assembly... 4-13 Installation... 14 Drawer Removal... 15 Operation... 15 Maintenance... 15 Accessories... 16 Limited Warranty... 16 Perform
More informationFunctional Hardware HINGES:
Functional Hardware»» One Stop Shop for all cabinet manufacturing hardware including hinges, slides, screws, door bumpers, shelf pins, catches and more»» Third Party Testing on hinges and slides to meet
More informationPLANA executive desks
PLN executive desks High-quality executive desks from PLN collection are unique in its own way. Straight lines, smooth-running forms, warm, refined materials. esthetics and functionality creates a sense
More informationdoor styles profile profile 2¼" 2¼"
fully assembled door styles frankfurt - 3/4" furniture grade particleboard - 3mm (1/8") ABS thick edgebanding - CARB compliant - Low pressure laminate finish - Integrated face-mount pull included - Pulls
More informationSolutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs
AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches
More informationStudent Services & Classroom Addition
SECTION 105116 - WOOD LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationEspresso. bedroom collection. saudereducation.com
Espresso bedroom collection saudereducation.com Espresso beds Solid hardwood posts with tongue and groove joints Hardwood plywood panels Tooless beds for easy set up or dismantling Multiple height adjustments
More informationSECTION ARCHITECTURAL WOOD CASEWORK
PART 1 GENERAL 1.01 SECTION INCLUDES A. Specially fabricated cabinet units. B. Countertops. C. Cabinet hardware. D. Factory finishing. E. Preparation for installing utilities. 1.02 SUBMITTALS SECTION 06
More informationTHEME SERIES QUICK CABINETS
FEATURES Pre-assembled units save time Easy-clean all laminate construction All graphic are permanently embedded in the high pressure laminate and will not peel off Tough, chip-resistant PVC edges Assembled
More informationEnterprise ADAPTABLE. KEWAUNEE encouraging new discovery MOVEABLE WORKSTATIONS
Enterprise ADAPTABLE MOVEABLE WORKSTATIONS KEWAUNEE encouraging new discovery Freestanding Tables Self-supporting workstations Single and double sided Adjustable height worksurfaces Integrated shelving
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since
More information