ALORIS TOOL TECHNOLOGY CO., INC. All Aloris products are

Transcription

1 ALORIS TOOL TECHNOLOGY CO., INC. 2 CATALOG The Originator of Quick Change Tooling All Aloris products are proudly made in the USA.

2 INTRODUCING ALORIS INDEXABLE TOOL OSTS & SETS New roduct Built By The Originator of The Quick Change Tool ost For Manual and CNC Lathes The Aloris Indexable Tool ost allows 4 independent tool holders to be locked to the tool post simultaneously. This allows the operator to do multiple operations by means of indexing the tool post to any of the 24 locking positions. The index positioning and locking is accomplished by the same means as a turret on a CNC Lathe. This is the ultimate in productivity on Manual and CNC Lathes without indexing capabilities. Two standard Aloris Tool Holders can be mounted with no modification or you can modify some existing Aloris holders to fit the indexable tool post. Increase roduction By % All Aloris products are proudly made in the USA. Industry Standard Repeatability of. Some standard Aloris Tool Holders will fit if slightly modified All components heat treated and ground 24 position, precision indexing through heat treated precision ground face gears recision engineered to assure repetitive accuracy Full length wedge lock as featured on the traditional Aloris Tool ost for ultimate rigidity Optionally furnished with anti-rotation key precision fit to lathe compound (eliminates rotation and movement of tool post under extreme cutting conditions) The highest quality lathe tool accessories available Only sizes required for up to 6 inch swing Over forty five years of machine tool manufacturing experience Mounting wrench included with tool post ATENT ENDING The originator of quick change tooling ALORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY AVENUE O BOX 29 CLIFTON, NJ -29 TEL: FAX: TOLL FREE: aloris@aloris.com WEBSITE: REV INDEXABLE TOOL OSTS & SETS ON AGES -.

3 TABLE OF CONTENTS Super recision Quick Change Tool osts, Replacement arts...2 Miniature Quick Change Tool ost (MA)... Shank Tool Holders, Quick Change #, #S, #2, #2S, #6, #9, #, #L...4 Boring Bar Holders, Quick Change #4, #4, #4D, #4D, #, #4, #4...6 Boring Bar Reducer Bushings...6 Drilling Holders, Quick Change #, #C, #, #, #4, #, # Tapered Sockets Universal Tool Holders, Quick Change #2, #, #22... Cartridges CRT-2, CRT-, CRT-4... Carbide Insert Cutting Tools with Adjustable Chipbreaker, Quick Change #2, #2N...2 Combination Carbide Insert Cutting Tools with Adjustable Chipbreaker, Quick Change #6, #6N...4 Carbide Insert Cutting Tools, Quick Change #2, #8, #8L...6 Carbide Insert rofiling Tool Holders, Quick Change #, #L Knurling Tool Holders, Quick Change Knurls #, # Threading Holders, Quick Change #8, #8, # Blades & Inserts, Insert Cartridges Universal arting Blade Holder #, #R Aloris Wedge Grip Carbide Insert Blades, arting Blades Cut-Off & Grooving Holders, Quick Change #, # Aloris Wedge Grip Carbide Cut-Off Inserts...24 Super-recision Single-Dovetail Heads, Universal Mounting...2 Miniature (MA) Tool ost & Tool Holders...26 Super-recision Intro-ro Sets iece Starter Set iece Sets, AS Sets...2 Qualified Tool osts & Holders...28 Recommendations, Tool osts to Lathes, T Nut Ordering Info...29 Indexable Tool osts, Options, T Nut Ordering Info, Replacement arts... Indexable Tool Holders, Starter Sets, Aloris Wedge Grip Carbide Cut-Off Inserts, Blades...2 Double-Lock Tool Holders, AD Series...4 rofiling Tool Holders, AT-, AT-L... Chamfering, Facing & Turning Holders, ASIH Series... Turning Holders, AT-2, AT-2N, Socket Screw T -Wrenches...6 Threading Tools, AT-8, AT-86 Cartridges, Blades... Adjustable Shank Tool Holders, AT-2, AT Mini Swivel-Cartridge Tool Holders, AT Series AT-S, AT-S, AT-S/AT-, AT-, AT-, Replacement arts...9 Boring Bars, Cartridge-Head, CBB 4-2, -2, 6-, Replacement arts...4 Boring Bars Adjustable Chip Breaker CBB-, 2,, 4, Replacement arts...4 Boring Bars, Square Tool Bit BB-, 2,, 4,, 6,, 8, 9,,...4 Boring Bars, Adjustable Lead Angle BS-, 2,, 4,, 6/BL-, 2,, 4,, Boring Bars, CBB-, 2,, 4,, 6,, S...4 Internal Threading Bars, ATB Series Right or Left Sizes thru...44 Knurling Holder, Adjustable, AT-9 & Combo CNC Bar uller Knurling Tool, AT Spindle & Collet Stops Universal, Replacement arts...46 SGIH Cut-Off & Grooving Blades & CNC Tool Blocks Series SGTBN...4 Aloris # Cut-Off System...48 Carbide Inserts and Lay Down Threading Inserts...49 Cut-Off and Grooving Inserts GT...4 Fax Order Form... olicies & rocedures...6 age

4 ALORIS SUER RECISION QUICK CHANGE TOOL OSTS FOR MANUAL AND CNC LATHES GUARANTEED LASTING REETITIVE ACCURACY TO WITHIN MILLIONTHS FEATURES: ONLY A SECOND TO CHANGE TOOLS RUGGED NO CHATTER OR VIBRATION NO TIME WASTED WITH SHIMS UNLIMITED VERSATILITY SAFE AND SIMLE TO OERATE SEED YOUR LATHE OERATIONS U TO 9% GUARANTEED* Aloris super precision tool post atented locking device assembly The ALORIS Super recision tool post provides built-in quick tool changing versatility and flexibility combined with wide range, positive control and repetitive accuracy to meet the most exacting working tolerances. Whether for tool room or production work, the Aloris line of tool posts and holders will save set-up time and increase production on all types of lathe operations from fine precision work to heavy duty cutting without chatter or vibration. Comparison with other tools will highlight Aloris superiority: the quick change tool holder eliminates time consuming set-up no tool post indexing necessary, no indexing balls, no need for shims, no need to disturb the basic set-up. This new catalog includes the newest developments produced by Aloris design engineers in their constant search for new and better products that will increase productivity and reduce operating costs of all machine tool operations. Worm Handle Screw Bushing Sliding tapered gib Ball Felt Seal ositive locking action is achieved by simply turning handle which is fastened to worm. Worm is free turning around screw bushing. As screw bushing restricts vertical movement of worm, action of ACME threads causes movement of sliding tapered gib. Movement of gib provides QUICK-OSITIVE locking or unlocking of tool holder mounted on tool post dovetail. *This guarantee does not include repair or replacement due to misuse, abuse, accidental damage or normal wear. age 2

5 ALORIS QUICK CHANGE TOOL OSTS Aloris Miniature (MA) Tool ost Also on age 26 Super precision single dovetail tool post designed for jewelers and miniature lathes. Three holders can hold six tools for various operations. Height adjustment is provided for each tool. Tool holder capacity: / 8" / 8". Tool post dimensions: / 2" x / 2" x / 4". See page 26 for toolholders. : MA Aloris Super-recision Tool ost recision engineered to assure repetitive accuracy. Advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on any engine lathe, bench or CNC lathe, for a wide range of operations from fine precision work to heavy duty cutting. AXA BXA CXA CA DA EA AXA SERIES ORDERING INFORMATION BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES : AXA A B C D E H R /6 4 /6 SWING U TO " : BXA A B C D E H R /6 /6 : CXA SWING SWING U TO A B C D E H R U TO 2 " 6 8" : CA A B C D E H R SWING U TO 4 2" : DA A B C D E H R 4 " 2 /6 8 SWING U TO 48" : EA A B C D E H R 6 8 SWING 2" HVY DUTY & LARGER LATHES MAKE OF LATHE SWING A B C D E *To order tool holders see page 4 thru 2. *To order sets see pages 26 and 2. *All Aloris Super recision Quick Change Tool osts are furnished with a BLANK T-Nut. Aloris can machine the T-Nut at NO ADDITIONAL CHARGE if dimensions are provided at time of purchase, otherwise the T-Nut will ship blank. lease fill out chart and fax to (lease reference your urchase Order on your T-Nut ordering sheet.) T BOLTS AXA-TB* BXA-TB* CXA-TB* CA-TB* DA-TB* EA-TB* OSTS: RELACEMENT ARTS Not Interchangeable with Indexable Tool ost arts. BALLS AXA-BALL* BXA-BALL* CXA-BALL* CA-BALL* DA-BALL* EA-BALL* HANDLES AXA-HDL* BXA-HDL* CXA-HDL* CA-HDL* DA-HDL* EA-HDL* FLANGE NUTS AXA-FN* BXA-FN* CXA-FN* CA-FN* DA-FN* EA-FN* age

6 QUICK CHANGE SHANK TOOL HOLDERS # TURNING AND FACING HOLDER Takes various sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations. AXA SERIES AXA- A B C D Tool Bit /6 /6 /6 #S #2 OVERSIZE TURNING AND FACING HOLDER Takes large sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations. B dimension is oversize which allows larger tools to be used. BORING, TURNING AND FACING HOLDER V groove holds round shank boring bars and tools as well as square tool bits. AXA-S A B C D Tool Bit " /6 max AXA-2 A B C D Tool Bit Shank /6 /6 /6 /6 #2S #6 OVERSIZE BORING, TURNING AND FACING HOLDER V groove holds round shank boring bars and tools as well as square tool bits. B dimension is oversize which allows larger tools to be used. MULTILE TOOL HOLDER Versatile, ideal for repetitive work: for gang set-ups or form tool. AXA-2S A B C D Tool Bit Shank " /6 max AXA-6 A B C D Tool Bit " 9 /6 #9 MULTI-UROSE HOLDER Ideal for multiple operations. Left or right turning and facing, working close to tail stock, form tool gang set-ups, etc. Extremely useful for short heavy duty boring or CNC gang tooling. AXA-9 SECIAL ORDER A B C D E F Tool Bit /6 " 2 /6 # #L EXTENSION TOOL HOLDER # & L A new addition to the versatile Aloris dovetail mounted quick-change tool holder series. The # provides an extremely rugged extended open slot featuring maximum rigidity for deep turning or facing operation. L opposite hand. AXA- AXA-L A B C D E Tool Bit /6 /6 2 /6 HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* TOOL HOLDER SET SCREWS (SET OF 4) AXA-SS* age 4

7 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA- CXA- CA- DA- EA- A B C D Tool Bit A B C D Tool Bit A B C D Tool Bit A B C D Tool Bit A B C D Tool Bit /6 2 /6 " 2 " 2 /6 " 2 /6 4" BXA-S CXA-S CA-S DA-S A B C D Tool Bit A B C D Tool Bit A B C D Tool Bit A B C D Tool Bit /6 max 9 /6 " 2 " max 2" 2 max 2 /6 " max BXA-2 CXA-2 CA-2 DA-2 EA-2 A B C D Tool Bit Shank A B C D Tool Bit Shank A B C D Tool Bit Shank A B C D Tool Bit Shank A B C D Tool Bit Shank /6 2 /6 " 2 " /6 2 /6 " " 2 /6 4" BXA-2S CXA-2S CA-2S DA-2S A B C D Tool Bit Shank A B C D Tool Bit Shank A B C D Tool Bit Shank A B C D Tool Bit Shank /6 max 9 /6 " 2 " max 2" 2 max " 2 /6 " max BXA-6 CXA-6 CA-6 DA-6 EA-6 A B C D Tool Bit A B C D Tool Bit A B C D Tool Bit A B C D Tool Bit A B C D Tool Bit /6 9 /6 /6 /6 2 9 /6 2 2 " 2 " 2 2 4" BXA-9 SECIAL ORDER CXA-9 SECIAL ORDER CA-9 SECIAL ORDER DA-9 SECIAL ORDER A B C D E F Tool Bit A B C D E F Tool Bit A B C D E F Tool Bit A B C D E F Tool Bit 2 /6 /6 2 /6 2" " 2 2" " " 4" 2 4 " BXA- BXA-L CXA- CXA-L CA- CA-L DA- DA-L EA- EA-L A B C D E Tool Bit A B C D E Tool Bit A B C D E Tool Bit A B C D E Tool Bit A B C D E Tool Bit 2 /6 2 /6 " 2 " 2 " " 2 /6 4" 6 BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* BXA-SS* CXA-SS* CA-SS* DA-SS* EA-SS* age

8 QUICK CHANGE BORING BAR TOOL HOLDERS #4, #4 HEAVY DUTY BORING BAR HOLDER Equipped with a split bushing to accommodate a boring bar of smaller diameter. It grips bar with extreme rigidity, cuts smoothly without chatter. AXA SERIES AXA-4 A B D D AXA-4 #4D, #4D #, #4 & #4 BORING BAR HOLDER recision ground bore and split clamping design to accommodate excellent clamping pressure and the ability to adjust positive to negative cutting angle on boring bar. Bushings sold separately, see below. BORING BAR HOLDER Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. Capacities listed in chart. Bushings sold separately, see below. INS (New Style) For Holders #4* #4* (Set of 2) JAM SCREWS For Holders #4* #4* (Set of 2) A B D D " AXA-INS* AXA-JS* AXA-4D A B D AXA-4D A B D " AXA- A B D AXA-4 A B D AXA-4 A B D " STO RINGS HEIGHT ADJUSTMENT ASSEMBLY BUSHINGS/STANDARD BUSHINGS/SECIAL (Non-returnable/cancelable item) SR- ( I.D.)* AXA-HA* AXA-STD* AXA-SL* REDUCER BUSHINGS FOR BORING BAR TOOL HOLDERS Designed to accommodate cutting tools of smaller shank diameters, such as drills, endmills, and small boring bars. ORDERING INFORMATION RB-* RB-2* RB-4* RB-42* RB-* RB-2* SIZES O.D. D D /6 " " /6 /6 age 6

9 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA-4 CXA-4 CA-4 DA-4 EA-4 A B D D A B D D A B D D A B D D A B D D " 2" " " 2" " 2 " " BXA-4 CXA-4 CA-4 DA-4 A B D D A B D D A B D D A B D D " 2" " 2 " 2 2" BXA-INS* CXA-INS* CA-INS* DA-INS* EA-INS* BXA-JS* CXA-JS* CA-JS* DA-JS* EA-JS* BXA-4D CXA-4D CA-4D DA-4D EA-4D A B D A B D A B D A B D A B D " 2" " " 2" " BXA-4D CXA-4D CA-4D DA-4D A B D A B D A B D A B D " 2" 2 2 2" BXA- CXA- CA- DA- EA- A B D A B D A B D A B D A B D " 2" " 2" 2 " 2 2" BXA-4 CXA-4 CA-4 DA-4 EA-4 A B D A B D A B D A B D A B D " 2" " " 2 " 2 " 2" 4" 2 BXA-4 CXA-4 CA-4 DA-4 EA-4 A B D A B D A B D A B D A B D " 2" 2 2 2" 2 4 " SR- ( I.D.)* SR-2 (" I.D.)* SR-2 (" I.D.)* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* BXA-STD* CXA-STD* CA-STD* DA-STD* EA-STD* BXA-SL* CXA-SL* CA-SL* DA-SL* EA-SL* Larger holders available for CA, DA Series on page 28. ALORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY AVENUE.O. BOX 29 CLIFTON, NJ -29 TEL : FAX: TOLL FREE: aloris@aloris.com WEBSITE: The originator of quick change tooling age

10 QUICK CHANGE DRILLING HOLDERS AXA SERIES # DOVETAIL CHUCK HOLDER The uniquely designed dovetail chuck holder permits quick and accurate mounting of drills, reamers, taps, boring bars, etc., and feed by means of your lathe s carriage power drive it eliminates tailstock mounting and tailstock drive. The Aloris chuck holder offers all of the quick-change, repeat positioning accuracy and high-rigidity features found in all Aloris precision dovetail holders. The chuck is mounted in a recessed position for minimum overhang, permitting use of the entire usable length of the tool. Available in capacities up to -in. Dovetail holder supplied complete with chuck and key. AXA- A CHUCK CAACITY 2 #C C COLLET HOLDER Can be used with a variety of shank tools: drills, reamers, C. bores, taps, end mills, boring bars and other tools. Collet not included. A B AXA-C A B COLLET SIZE /6 C #, #, #4, # MORSE TAER HOLDER Drills with carriage by using power feed instead of tail stock. Easily centered. AXA- A B TAER HOLE SIZE #2 M.T. AXA- A B TAER HOLE SIZE # M.T. HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* #44 BREECH-LOADING TAER SOCKETS AND HOLDERS offers all of the advantages of the well known series 42 quick-change super-precision boring bar holder; with the addition of a gravity latch which allows the holder to accept the new breech-loading AMS Morse taper sockets shown below. The latch provides positioning accuracy, prevents turning of the taper socket, and assures rigidity. The breech or back-end loading feature of the AMS Morse taper socket, reduces tool changeover time because the cross-slide remains fixed, eliminating re-centering. The latch does not interfere with the holder s ability to accept Aloris series BB boring bars, with or without keyed lock stop rings, or any round shank tools. A flick of the Aloris tool post handle locks both the holder and taper socket (or boring bar) in working position in one fast operation. recise height adjustment is set and locked by means of a knurled stop and lock-nut on the holder, and positive repeat positioning accuracy to within. inches is assured. Breech-loading taper sockets and holders shown on page 9. NOT FOR ISTON TYE TOOL OST SECIAL CXA-44 SECIAL CA-44 A B C D A B C D series 44 holders " 2" " 4 2 " age 8

11 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA- CXA- CA- DA- A CHUCK CAACITY A CHUCK CAACITY A CHUCK CAACITY A CHUCK CAACITY /6 2 9 /6 /6 2 /6 /6 BXA-C CXA-C CA-C DA-C A B COLLET SIZE A B COLLET SIZE A B COLLET SIZE A B COLLET SIZE /6 C 2" " C 2 C " C BXA- CXA- CA- DA- EA- A B TAER HOLE SIZE A B TAER HOLE SIZE A B TAER HOLE SIZE A B TAER HOLE SIZE A B TAER HOLE SIZE #2 M.T. " 2" # M.T. 2 # M.T. 9 /6 #4 M.T. # M.T. BXA- CXA-4 CA-4 DA- A B TAER HOLE SIZE A B TAER HOLE SIZE A B TAER HOLE SIZE A B TAER HOLE SIZE # M.T. /6 2 #4 M.T. 2 #4 M.T. # M.T. BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* BREECH-LOADING TAER SOCKETS AND HOLDERS designed to accept drills, reamers, taps, etc. with Morse taper shanks. ermits rapid interchanging of the two tools without disengaging the tapers, and without moving the cross-slide. The socket is notched at one-inch intervals so that machining depth can be repeated accurately from piece to piece. The gravity latch on the series 44 engages with the selected bar notch to assure accurate positioning and to prevent the bar from turning. ORDER # O.D. MORSE TAER AMS-2 " #2 series AMS breech-loading Morse taper sockets age 9

12 UNIVERSAL TOOL HOLDERS #2, #, #22 FOR RIGHT OR LEFT HAND TURNING, FACING, CHAMFERING AND BORING (#22) A unique design for models #2 & # holders provides for many angular turning, contouring and chamfering operations. The cartridge has 2 indexing positions at intervals. See illustration below. The model #22 with its two dovetail design leads to a wide range of applications by permitting front and rear turning, contouring, boring and facing operations. All holders assure proper cutting edge and clearance angles at all indexing points. Two-way adjustable rake for right or left hand turning with cutting angle positive stop. #2 # Two-way adjustable rake for right or left hand turning with cutting angle positive stop. #22 Cartridge cradle Cartridge cradle Tool Steel Cartridge adjusts every for right or left hand turning, facing or chamfering. 2 positive lock positions. Exclusive positive lock with 2-way force holding insert down and tight against shoulder. Standard triangular carbide insert has 6 cutting edges. ILLUSTRATIONS SHOW WHAT ONE SINGLE TOOL CAN ACCOMLISH ICTORIAL DIAGRAM OF CARTRIDGE CARTRIDGE has 2 indexing positions at intervals. This means many angular turning and chamfering jobs can be done faster and easier. Standard triangular carbide insert has 6 cutting edges. CARTRIDGE CRT-2, CRT-, CRT-4 UNITS Can be easily adapted on bars, other special tools, to meet any customer s specifications. Cartridges can be supplied separately or combined with cartridge cradle. CARTRIDGE A B C D INSERT SIZE I.C. THICK CRT-2* " 9 /6 /6 Exclusive positive lock with 2-way force holding insert down and tight against shoulder. Tool Steel Cartridge adjuster every for right or left hand turning facing or chamfering. 2 positive lock positions. CRT-* CRT-4* " 2 /6 /6 /6 /6 /6 Choose from carbide style TNMS, TNM, or TNMG. See page 8. Cartridge CRT- and CRT-4 are interchangeable. age

13 ORDERING INFORMATION FOR #2, #, #22 AXA SERIES BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES UNIVERSAL TOOL HOLDER #2 Holder supplied as shown less insert. AXA-2 BXA-2 CXA-2 CA-2 A DIM. = A DIM. = A DIM. = 2" A DIM. = 2 E DIM. = E DIM. = /6 E DIM. = E DIM. = RELACEMENT ARTS CARTRIDGES CRT-2* CRT-2* CRT-2* CRT-2* CRADLE CC-2* CC-2* CC-2* CC-2* LOCK SCREW LS-2* LS-2* LS-2* LS-2* HEX LOCKING IN L-2* L-2* L-2* L-2* HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* BXA-HA* CXA-HA* CA-HA* UNIVERSAL TOOL HOLDER # CA- DA- EA- A DIM. = 2 A DIM. = 2 A DIM. = CARTRIDGES RELACEMENT ARTS E DIM. = E DIM. = /6 E DIM. = 2 /6 CRT-* CRT-* CRT-4* LOCK SCREW LS-* LS-* LS-4* HEX LOCKING IN L-* L-* L-4* HEIGHT ADJUSTMENT ASSEMBLY UNIVERSAL TURNING & BORING HOLDER #22 CA-HA* DA-HA* EA-HA* AXA-22 BXA-22 CXA-22 CA-22 DA-22 EA-22 A DIM. = A DIM. = A DIM. = 2 A DIM. = 2 A DIM. = 2 A DIM. = E DIM. = E DIM. = /6 E DIM. = E DIM. = E DIM. = 2 E DIM. = 2 MIN BORE DIM. = 2 MIN BORE DIM. = 2 MIN BORE DIM. = MIN BORE DIM. = MIN BORE DIM. = 4 MIN BORE DIM. = CARTRIDGES CRADLE LOCK SCREW HEX LOCKING IN HEIGHT ADJUSTMENT ASSEMBLY MAX BORE LENGTH=2 MAX BORE LENGTH=2 MAX BORE LENGTH=2 MAX BORE LENGTH=2 MAX BORE LENGTH= MAX BORE LENGTH=4 RELACEMENT ARTS CRT-2* CRT-2* CRT-2* CRT-* CRT-* CRT-4* CC-2* CC-2* CC-2* CC-* CC-* LS-2* LS-2* LS-2* LS-* LS-* LS-4* L-2* L-2* L-2* L-* L-* L-4* AXA-HA* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* age

14 QUICK CHANGE CARBIDE INSERT CUTTING TOOLS WITH ADJUSTABLE CHIBREAKER #2 AXA SERIES AXA-2 A B TRIANGULAR INSERT I.C. THICK RAKE OS. RELACEMENT ADJUSTABLE CARBIDE CHIBREAKER -R* RELACEMENT CARBIDE SHIM SM-4* TURNING HOLDER FOR CARBIDE TRIANGULAR INSERTS Accommodates standard triangular carbide insert positive rake. Furnished with fully adjustable carbide chipbreaker and carbide shim to protect the holder. CLAM SCREW FOR CHIBREAKER SHIM CLAM SCREW (SET OF ) TG-22* TG-42* I.C. T R /6 See full selection of inserts Inserts are priced individually however, on pages they must be purchased in packages of. TG-22 GRADE A2/A6 6 SCR-2* SM-4SS* HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* #2N AXA-2N A B TRIANGULAR INSERT I.C. THICK RAKE NEG. RELACEMENT ADJUSTABLE CARBIDE CHIBREAKER -R* RELACEMENT CARBIDE SHIM SM-42* TURNING HOLDER FOR CARBIDE TRIANGULAR INSERTS Accommodates standard triangular carbide insert negative rake. Furnished with fully adjustable carbide chipbreaker and carbide shim to protect the holder. Inserts are priced individually however, they must be purchased in packages of. CLAM SCREW FOR CHIBREAKER SHIM CLAM SCREW (SET OF ) TNG-2* TNG-42* TNG-44* I.C. T R /6 /6 See full selection of inserts on pages TNG-2 GRADE A2/A6 6 SCR-2* SM-42SS* HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* Sold in package of pcs. age 2 & up call for price. See full selection of inserts on pages 49 4.

15 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA-2 CXA-2 CA-2 DA-2 EA-2 TRIANGULAR INSERT TRIANGULAR INSERT TRIANGULAR INSERT TRIANGULAR INSERT A B I.C. THICK RAKE A B I.C. THICK RAKE A B I.C. THICK RAKE A B I.C. THICK RAKE A B " OS. /6 2" OS. 2 /6 OS. 2 /6 OS. 2 /6 TRIANGULAR INSERT I.C. THICK RAKE /6 OS. -R* -R* 2-R* 2-R* 2-R* SM-4* SM-4* SM-* SM-* SM-* TG-22 TG-22 TG-42 TG-42 TG-42 GRADE GRADE GRADE GRADE GRADE A2/A6 A2/A6 A2/A6 A2/A6 A2/A SCR-2* : SCR-2* : SCR-2* : SCR-2* : SCR-2* SM-4SS* SM-4SS* SM-SS* SM-SS* SM-SS* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* BXA-2N CXA-2N CA-2N DA-2N EA-2N TRIANGULAR INSERT TRIANGULAR INSERT TRIANGULAR INSERT TRIANGULAR INSERT A B I.C. THICK RAKE A B I.C. THICK RAKE A B I.C. THICK RAKE A B I.C. THICK RAKE A B " NEG. /6 2" NEG. 2 /6 NEG. 2 /6 NEG. 2 /6 TRIANGULAR INSERT I.C. THICK RAKE NEG. -R* -R* 2-R* 2-R* -R* SM-42* SM-42* SM-26* SM-26* SM-2* TNG-2 TNG-2 TNG-42 TNG-42 TNG-44 GRADE GRADE GRADE GRADE GRADE A2/A6 A2/A6 A2/A6 A2/A6 A2/A SCR-2* : SCR-2* : SCR-2* : SCR-2* : SCR-2* SM-42SS* SM-42SS* SM-26SS* SM-26SS* SM-2SS* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* Sold in package of pcs. & up call for price. See full selection of inserts on pages age

16 QUICK CHANGE COMBINATION CARBIDE INSERT CUTTING TOOLS WITH ADJUSTABLE CHIBREAKER #6 AXA SERIES AXA-6 A B TRIANGULAR INSERT I.C. THICK RAKE OS. RELACEMENT ADJUSTABLE CARBIDE CHIBREAKER RELACEMENT CARBIDE SHIM USED UNDER CARBIDE INSERT -R* -L* SM-4* COMBINATION TURNING AND FACING HOLDER FOR CARBIDE TRIANGULAR INSERTS Accommodates standard triangular positive rake carbide inserts. Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder. TG-22* TG-42* BUTTON HEAD CHIBREAKER/CLAM SCREW 2 REQ D/HOLDER I.C. T R /6 See full selection of inserts Inserts are priced individually however, on pages they must be purchased in packages of. TG-22 GRADE A2/A6 6 SCR-2* SHIM CLAM SCREW (SET OF ) SM-4SS* HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* #6N AXA-6N A B TRIANGULAR INSERT I.C. THICK RAKE NEG. RELACEMENT ADJUSTABLE CARBIDE CHIBREAKER RELACEMENT CARBIDE SHIM USED UNDER CARBIDE INSERT -R*. -L* SM-42* COMBINATION TURNING AND FACING HOLDER FOR CARBIDE TRIANGULAR INSERTS Accommodates standard triangular negative rake carbide inserts. Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder. Inserts are priced individually however, they must be purchased in packages of. TNG-2* TNG-42* TNG-44* BUTTON HEAD CHIBREAKER/CLAM SCREW I.C. T R /6 /6 See full selection of inserts on pages TNG-2 GRADE A2/A6 6 SCR-2* SHIM CLAM SCREW (SET OF ) SM-42SS* HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* Sold in package of pcs. age 4 & up call for price. See full selection of inserts on pages 49 4.

17 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA-6 CXA-6 CA-6 DA-6 EA-6 TRIANGULAR INSERT TRIANGULAR INSERT TRIANGULAR INSERT TRIANGULAR INSERT A B I.C. THICK RAKE A B I.C. THICK RAKE A B I.C. THICK RAKE A B I.C. THICK RAKE A B " OS. /6 2" OS. 2 /6 OS. 2 /6 OS. 2 /6 TRIANGULAR INSERT I.C. THICK RAKE /6 OS. -R* -R* 2-R* 2-R* 2-R* -L* -L* 2-L* 2-L* 2-L* SM-4* SM-4* SM-* SM-* SM-* TG-22 TG-22 TG-42 TG-42 TG-42 GRADE GRADE GRADE GRADE GRADE A2/A6 A2/A6 A2/A6 A2/A6 A2/A SCR-2* : SCR-2* : SCR-2* : SCR-2* : SCR-2* SM-4SS* SM-4SS* SM-SS* SM-SS* SM-SS* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* BXA-6N CXA-6N CA-6N DA-6N EA-6N TRIANGULAR INSERT TRIANGULAR INSERT TRIANGULAR INSERT TRIANGULAR INSERT A B I.C. THICK RAKE A B I.C. THICK RAKE A B I.C. THICK RAKE A B I.C. THICK RAKE A B " NEG. /6 2" NEG. 2 /6 NEG. 2 /6 NEG. 2 /6 TRIANGULAR INSERT I.C. THICK RAKE NEG. -R* -R* 2-R* 2-R* -R* -L* -L* 2-L* 2-L* -L* SM-42* SM-42* SM-26* SM-26* SM-2* TNG-2 TNG-2 TNG-42 TNG-42 TNG-44 GRADE GRADE GRADE GRADE GRADE A2/A6 A2/A6 A2/A6 A2/A6 A2/A SCR-2* : SCR-2* : SCR-2* : SCR-2* : SCR-2* SM-42SS* SM-42SS* SM-26SS* SM-26SS* SM-2SS* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* Sold in package of pcs. & up call for price. See full selection of inserts on pages age

18 QUICK CHANGE CARBIDE INSERT CUTTING TOOLS #2 AXA SERIES AXA-2 SECIAL ORDER A B TRIANGULAR INSERT I.C. THICK RAKE OS. RELACEMENT ADJUSTABLE CARBIDE CHIBREAKER -R* RELACEMENT CARBIDE SHIM USED UNDER CARBIDE INSERT SM-4* TURNING AND FACING HOLDER A combination holder with quick-reversibility. osition #, with no offset and osition #2, with offset; provides smooth, chatter-free turning and facing. Holder accommodates standard triangular positive rake inserts. Supplied with fully adjustable carbide chip breakers and shims to protect the holder. TG-22* TG-42* Inserts are priced individually however, they must be purchased in packages of. BUTTON HEAD CHIBREAKER/CLAM SCREW I.C. T R /6 See full selection of inserts on pages TG-22 GRADE A2/A6 6 SCR-2* SHIM CLAM SCREW (SET OF ) SM-4SS* HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* #8 & #8L AXAD-8 AXAD-8L A B C D IC " /6 /6 L.H. SHIMS INS SM-* L-6* R.H. 8 DIAMOND TURNING AND FACING TOOL Aloris Series D8 and D8L dovetail holders accommodate all varieties of standard 8 diamond shaped carbide inserts positive, negative or neutral rake and either left or right lead angle. Inserts are not supplied. They are designed for use with Aloris quick change tool posts and allow turning and facing operations without removing the holder from the tool post. Repeat positioning accuracy within millionths is assured when used with Aloris tool posts. Inserts are priced individually however, they must be purchased in packages of. CLAM CLAM SCREW ORDER NUMBER CNMG-42* CNMG-4* CNMG-64* HEIGHT ADJUSTMENT ASSEMBLY 8 CARBIDE INSERTS I.C. H R T.2 /6.2.2 See full selection of inserts on pages CNMG-42 GRADE A2/A6 6 ACK-2* ASTC-2* AXA-HA* & up call for price. age 6 See full selection of inserts on pages 49 4.

19 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA-2 CXA-2 CA-2 SECIAL ORDER SECIAL ORDER SECIAL ORDER TRIANGULAR INSERT TRIANGULAR INSERT A B I.C. THICK RAKE A B I.C. THICK RAKE A B " OS. /6 2" OS. 2 TRIANGULAR INSERT I.C. THICK RAKE /6 OS. -R* -R* 2-R* SM-4* SM-4* SM-* TG-22 TG-22 TG-42 GRADE GRADE GRADE A2/A6 A2/A6 A2/A SCR-2* : SCR-2* : SCR-2* SM-4SS* SM-4SS* SM-SS* BXA-HA* CXA-HA* CA-HA* BXAD-8 BXAD-8L CXAD-8 CXAD-8L CAD-8 CAD-8L DAD-8 DAD-8L EAD-8 EAD-8L A B C D IC A B C D IC A B C D IC A B C D IC A B C D IC /6 /6 /6 2 /6 9 / /6 2 2 SM-* SM-* SM-* SM-9* SM-4* L-6* L-* L-6* L-6* L-2* CNMG-42 CNMG-42 CNMG-42 CNMG-4 CNMG-64 GRADE GRADE GRADE GRADE GRADE A2/A6 A2/A6 A2/A6 A2/A6 A2/A ACK-2* : ACK-2* : ACK-2* : ACK-2* : ACK-2* ASTC-2* ASTC-2* ASTC-4* ASTC-4* ASTC-4* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* Sold in package of pcs. & up call for price. See full selection of inserts on pages age

20 QUICK CHANGE ROFILING TOOL HOLDERS # & #L ROFILING TOOL HOLDERS Available with right or left hand design for front or rear turning, profiling and contouring operations. Design features include: Unique, positive locking of insert is accomplished by the two-way force exerted by locking pin and L.H. the locking screw. Insert is held down and tight against the shoulders. Clamp lock insures extra rigidity of insert and holds chip-breaker, when used, securely in place. Choice of various diamond shaped inserts provides adaptation to positive or negative rake profiling. Available in Model # (right hand) or #L (left hand), dovetail mounting design assures maximum repeating accuracy when used with standard Aloris Tool ost. Holder supplied with shim and clamp. HEX LOCKING INS CLAMS CLAM SCREW CARBIDE SHIMS (SEATS) AXA SERIES AXA- AXA-L A B " ROFILING INSERT I.C. THICK RAKE /6 OS. or NEG. L-6* ACK-2* ASTC-4* SM-* HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* R.H. Carbide inserts listed at bottom of this page, and full selection on pages QUICK CHANGE KNURLING TOOL HOLDERS AXA SERIES # KNURLING, FACING AND TURNING HOLDER For turning and facing as well as knurling. Supplied with a set of high speed precision ground and lapped medium diamond knurls. Easily replaceable. Holder supplied with 2 knurls. HEIGHT ADJUSTMENT ASSEMBLY AXA- A B C E E TOOL BIT 2 9 /6 /6 AXA-HA* #9 ADJUSTABLE KNURLING HOLDER excellent knurling, with approach adjustability, is provided with the newly designed #9 knurling holder. The #9 is selfcentering and is adjusted by means of a threaded spindle with left and right hand threads, providing the ideal near-vertical-axis approach angle for a wide range of stock diameters. Spindle and cross-slide pressure are minimal, thus knurling of thin wall tubing is easily performed. The Aloris #9, which is designed for use in any standard turret tool post or other open-slot holder, is also availalbe HEIGHT ADJUSTMENT ASSEMBLY with dovetail mounting (series 9) to fit Aloris tool posts. recision ground, " O.D. x " wide, high-speed medium diamond knurls are supplied unless otherwise specified. AXA-9 A KNURL SIZE 2" x x AXA-HA* CARBIDE ROFILING INSERTS FOR & L ROFILE TOOLS STYLE DNGA NEGATIVE RAKE STYLE DNMZ " OSITIVE I.C. T R INSERT GRADE A2/A6 6 /6 DNGA-2* STYLE DNMG NEGATIVE STYLE DNMS " OSITIVE /6 DNMG-2* DNMS-2 DNMZ-42* DNMS-42 Inserts are priced individually, however, they must be purchased in packages of. age 8 See full selection of inserts on pages 49 4.

21 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA- BXA-L CXA- CXA-L CA- CA-L DA- DA-L ROFILING INSERT ROFILING INSERT ROFILING INSERT A B I.C. THICK RAKE A B I.C. THICK RAKE A B I.C. THICK RAKE A B " 2" 2 2 /6 OS. or NEG. /6 OS. or NEG. /6 OS. or NEG. ROFILING INSERT I.C. THICK RAKE /6 OS. or NEG. L-6* L-6* L-6* L-6* ACK-2* ACK-2* ACK-2* ACK-2* ASTC-4* ASTC-4* ASTC-4* ASTC-4* SM-* SM-* SM-* SM-* BXA-HA* CXA-HA* CA-HA* DA-HA* TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA- CXA- CA- DA- A B C E E TOOL BIT A B C E E TOOL BIT A B C E E TOOL BIT A B C E E TOOL BIT " 2 /6 2" /6 2 " " 4 " BXA-HA* CXA-HA* CA-HA* DA-HA* BXA-9 CXA-9 CA-9 DA-9 A KNURL SIZE A KNURL SIZE A KNURL SIZE A KNURL SIZE 2" x x 2" x x 2" x x 2" x x BXA-HA* CXA-HA* CA-HA* DA-HA* HIGH SEED KNURLS For # & #9 Holders: AD-Diamond/AS-Straight/NEW Convex Hi-Cobalt (ACD-Spiral & ACS-Straight) RELACEMENT KNURLS KNURL AD6R/AD6L/AS6* ACD6R/ACD6L/ACS6* COARSE AD2R/AD2L/AS2/AD2R* AD2L/AS2/ACD2R/ACD2L* ACS2/ACD2R/ACD2L/ACS2* MEDIUM ADR/ADL/AS* ACDR/ACDL/ACS* FINE (NEW) TiN COATED KNURL-LOCK SCREW SCR-* Used with any # and 9 holder age 9

22 QUICK CHANGE THREADING HOLDERS, BLADES & INSERTS #8 THREADING HOLDER #8 This universal threading holder comes with an interchangeable high speed threading blade which has two cutting edges. You may now reverse your spindle and cut a thread without fear of hitting shoulders. Speeds your threading. Also available with carbide insert blade. Holders supplied with blade as follows: AXA-, BXA-CXA-6, CA-DA-EA-4, or up to request. HEIGHT ADJUSTMENT ASSEMBLY AXA SERIES AXA-8 A B USED WITH /6 ANY THREADING BLADE SHOWN BELOW AXA-HA* #8 THREADING AND GROOVING TOOL HOLDER #8 Holder provides accurate threading and grooving. It is equipped with a threading insert holder (Aloris AT86) at the front and an open slot for a grooving tool at the rear. Cutting tools are not included. Also available with highspeed blade. Holder supplied with AT86 insert holder less threading insert. Also available with high-speed blade. HEIGHT ADJUSTMENT ASSEMBLY AXA-8 A B USED WITH /6 ANY THREADING BLADE SHOWN BELOW AXA-HA* #88 ADJUSTABLE THREADING HOLDERS WITH H.S. BLADE & AT88 HEAD The new Aloris Series 88 Adjustable Threading Holder for right and left-hand threading is designed for use with the new Aloris ATH, ATV or AT2V dual insert threading holders with two carbide cutting tips. In addition, the #88 Series holder will accommodate standard Aloris AT86 threading insert holders as well as standard high speed steel (HSS) Aloris Series or AC Series. The key characteristics of the Series 88 holder is its adjustability feature which allows easy setting of the thread helix angle to the left or right by means of two set screws, a direct-reading scale and a builtin locking feature. HEIGHT ADJUSTMENT ASSEMBLY AXA-88 A B C D USED WITH 2 ANY THREADING BLADE SHOWN BELOW AXA-HA* AT-88 Use with any #88 series holder. HIGH SEED THREADING BLADES 6 Exclusive blade design with two cutting edges, precision ground, assures unusually long life. To resharpen, simply grind the top surface. All blades are uniformly designed to fit any Aloris threading holder. BLADES & INSERTS CAACITY -4 4 or more T..I -6 6 or more T..I - or more T..I HIGH SEED THREADING BLADES ACME 29 Exclusive blade design with two cutting edges, precision ground, assures unusually long life. To resharpen, simply grind the top surface. All blades are uniformly designed to fit any Aloris threading holder. AC- CAACITY T..I AC-4 4 T..I AC- T..I AC-6 6 T..I AC- T..I AC-8 8 T..I AC-9 9 T..I AC- T..I AC-2 2 T..I AC-4 4 T..I AC-6 6 T..I THREADING BLADE GAUGE Gauge is used for quick and accurate checking of re-ground high speed parting and/or threading blades to maintain proper angle for accurate thread cutting. GA #8 THREADING INSERT HOLDER AND INSERT 6 Blade is reversible and has an adjustable insert for resharpening purposes. Inserts are stocked in grade A2, A6, and TiN. When ordering specify grade desired, otherwise grade A6 will be supplied. Blade fits any Aloris threading holder. HOLDER AT-86 CAACITY 6 TO 48 T..I. THREADING CARBIDE INSERT FOR HOLDER # AT-86 STYLE TI INSERT GRADE A2/A6 6 age 2 6 V 6 48 AT-4R* See full selection of inserts on pages 49 4.

23 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA-8 CXA-8 CA-8 DA-8 EA-8 A B USED WITH A B USED WITH A B USED WITH A B USED WITH A B USED WITH ANY THREADING BLADE ANY THREADING BLADE ANY THREADING BLADE ANY THREADING BLADE " SHOWN BELOW 2" SHOWN BELOW 2 SHOWN BELOW 2 SHOWN BELOW ANY THREADING BLADE SHOWN BELOW BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* BXA-8 CXA-8 CA-8 DA-8 A B USED WITH A B USED WITH A B USED WITH A B USED WITH " ANY THREADING BLADE ANY THREADING BLADE 2" 2 ANY THREADING BLADE SHOWN BELOW SHOWN BELOW SHOWN BELOW 2 ANY THREADING BLADE SHOWN BELOW BXA-HA* CXA-HA* CA-HA* DA-HA* BXA-88 CXA-88 CA-88 DA-88 A B C D USED WITH A B C D USED WITH A B C D USED WITH A B C D USED WITH " 2 ANY THREADING BLADE 2" 2 ANY THREADING BLADE 2 2 ANY THREADING BLADE SHOWN BELOW SHOWN BELOW SHOWN BELOW 2 2" 2 ANY THREADING BLADE SHOWN BELOW BXA-HA* CXA-HA* CA-HA* DA-HA* INSERT CARTRIDGES STAND U INSERT CARTRIDGE Aloris Series V Threading Cartridge for two triangular 6 threading inserts CARTRIDGE AT-V A Dim. sq. B Dim. /6 C Replacement Screw # AGTS-* D Replacement Screw # /6 8x shcs CLAM # CLAM SCREW # INSERT IC ACK-9* ASTC-9* KEY # T-* C Screw AT-2V sq. AGTS-2* /6 8x shcs ACK-9* ASTC-9* T-2* D Screw INSERTS: EXTERNAL VERTICAL 6 TRIANGULAR THREADING INSERTS STYLE TI IC L USED WITH INSERT GRADE CARTRIDGE A2/A os AT-V TMC-2NV* 6 8+ Neg AT-V TNMC-2NV* 6 6+ os AT-2V TMC-4NV* 6 6+ Neg AT-2V TNMC-4NV* LAYDOWN INSERT CARTRIDGE Aloris Series H Threading Cartridge for two triangular 6 threading inserts C Screw AT-H AT-2H A Dim. sq. sq. B Dim. /6 C Replacement Screw ASA-T* ASA-4T* D Replacement Screw /6 24x lg shcs /6 24x lg shcs INSERT IC KEY # T-* T-2* INSERTS: ARTIAL ROFILE 6 TRIANGULAR THREADING INSERTS STYLE TI IC L USED WITH CARTRIDGE INSERT A2/A6 GRADE 6 6 V-RH 8 48 os AT-H 6ER-LAG6-RH* D Screw 6 V-LH 8 48 os AT-H 6ER-LAG6-LH* 6 V-RH os AT-2H 22ER-LN6-RH* 6 V-LH os AT-2H Sold in package of pcs. & up call for price. See full selection of inserts on pages ER-LN6-LH* age 2

24 QUICK CHANGE ARTING & INSERT BLADE HOLDERS CUT-OFF & GROOVING HOLDERS # UNIVERSAL ARTING BLADE HOLDER # and #R Holders are only for use with the Aloris Wedge Grip Carbide Insert blades, T- type blades or with bevel (wedge-shape) blades having parallel top and bottom edges, as shown below. For bevel (see drawing) as well as T-type blades. Enables you to cutoff close to chuck. Absence of vibration prevents breaking blades. ALORIS WEDGE GRI CARBIDE INSERT BLADES ARTING BLADES AXA SERIES AXA- A B C D BLADE HEIGHT /6 /6 SGIH 9-C-A -2* WEDGE AND LOCK SCREW ASSEMBLY FOR HOLDERS # HEIGHT ADJUSTMENT ASSEMBLY WIDTH A : HEIGHT B : WSA-* AXA-HA* #R UNIVERSAL ARTING BLADE TOOL HOLDER REVERSIBLE Has the same features as # with the advantage of rear cut-off use. ALORIS WEDGE GRI CARBIDE INSERT BLADES AXA-R A B C D BLADE HEIGHT /6 /6 SGIH 9-C-A ARTING BLADES -2* # CUT-OFF AND GROOVING HOLDER Designed for extremely high rigidity under heavy duty conditions, and cool chatterfree operation at higher speeds. Two different blades can be used with this holder: wedge grip throwaway insert blade, or reversible blade with brazed-in carbide tips. The chip-breaker is an integral part of the blade and cannot be lifted by broken chips. Simplicity is but one of the major advantages of the Series. Adjustment of the blade position is simple, the locking is accomplished by one screw instead of the usual number of adjusting and clamping screws. The versatility of this tool is further increased by the availability of a wide range of cutting edge widths. Holder supplied less blade. When ordering brazed carbide blades, specify grade A2 or A6. For carbide cut-off inserts see page 4. WEDGE AND LOCK SCREW ASSEMBLY FOR HOLDERS # HEIGHT ADJUSTMENT ASSEMBLY REVERSIBLE BLADES WITH BRAZED-IN CARBIDE TIS WEDGE GRI THROWAWAY INSERT BLADES HEIGHT ADJUSTMENT ASSEMBLY ORDER NUMBER WIDTH x HEIGHT EXTRACTOR (For self-locking carbide insert removal) WEDGE AND LOCK SCREW ASSEMBLY FOR HOLDERS # ORDER NUMBER WIDTH x HEIGHT WIDTH A : HEIGHT B : WSA-* AXA-HA* AXA- A B USED WITH BLADE WIDTHS /6 /6, /6 or -2-* -8-* -2-*.2 x..8 x..2 x. -2-BSL* -8-BSL* -2-BSL*.2 x..8 x..2 x. ESG-* WSA-6* AXA-HA* age 22 Refer to age 24 for Aloris GT style wedge lock carbide cut-off inserts. See full selection of inserts on pages 49 4.

25 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA- CXA- CA- DA- EA- A B C D BLADE HEIGHT A B C D BLADE HEIGHT A B C D BLADE HEIGHT A B C D BLADE HEIGHT A B C D BLADE HEIGHT " /6 /6 /6 /6 /6 2" /6 2 2 " SGIH 26-4C-B SGIH 26-4C-CX SGIH 2-4.8C-C SGIH 2-4.8C-D SGIH 2-4.8C-E -* -4C* -W* -* -8* -8* WIDTH A : HEIGHT B : /6 WIDTH A : HEIGHT B : /6 WIDTH A : HEIGHT B : WIDTH A : /6 HEIGHT B : WIDTH A : /6 HEIGHT B : WIDTH A : /6 HEIGHT B : WSA-* WSA-2* WSA-* WSA-4* WSA-* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* BXA-R CXA-R CA-R DA-R EA-R A B C D BLADE HEIGHT A B C D BLADE HEIGHT A B C D BLADE HEIGHT A B C D BLADE HEIGHT A B C D BLADE HEIGHT /6 /6 /6 " /6 2" /6 2 " 2 " " SGIH 26-4C-B SGIH 26-4C-CX SGIH 2-4.8C-C SGIH 2-4.8C-D SGIH 2-4.8C-E -* -4C* -W* -* -8* -8* WIDTH A : HEIGHT B : /6 WIDTH A : HEIGHT B : /6 WIDTH A : HEIGHT B : WIDTH A : /6 HEIGHT B : WIDTH A : /6 HEIGHT B : WIDTH A : / 6 HEIGHT B : / 8 WSA-* WSA-2* WSA-* WSA-4* WSA-* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* BXA- A B USED WITH BLADE WIDTHS /6 2", /6 or CXA- A B USED WITH BLADE WIDTHS /6 2, /6 or CA- (2") CA- ( / 2 ) -2-BSL USED WITH A B A B $46. BLADE WIDTH -8-BSL /6 2 /6 $. /6, -2-BSL $.2 DA- A B USED WITH BLADE WIDTHS 2" /6 or EA- A B USED WITH BLADE WIDTHS 2 /6 /6 or -2-* -8-* -2-* -2-* -8-* -2-* -8-2* -2-2* -8-2* -2-2* -8-2* -2-2*.2 x..8 x..2 x..2 x..8 x..2 x..8 x 2..2 x 2..8 x 2..2 x 2..8 x 2..2 x BSL* -8-BSL* -2-BSL* -2-BSL* -8-BSL* -2-BSL* -8-2BSL* -2-2BSL* -8-2BSL* -2-2BSL* -8-2BSL* -2-2BSL*.2 x..8 x..2 x..2 x..8 x..2 x..8 x 2..2 x 2..8 x 2..2 x 2..8 x 2..2 x 2. ESG-* ESG-* ESG-* ESG-* ESG-* WSA-* WSA-8* WSA-9* WSA-8* WSA-* WSA-* BXA-HA* CXA-HA* CA-HA* DA-HA* EA-HA* age 2

26 QUICK CHANGE CUT-OFF & GROOVING HOLDERS BLADES & INSERTS AXA SERIES # CUT-OFF AND GROOVING HOLDER Designed for extremely high rigidity under heavy duty conditions, and cool chatter-free operation at higher speeds. Two different blades can be used with this holder: wedge grip throwaway insert blade, or reversible blade with brazed-in carbide tips, shown. The chip breaker is an integral part of the blade and cannot be lifted by broken chips. Simplicity is but one of the major advantages of the Series. Adjustment of the blade position is simple, the locking is accomplished by one screw instead of the usual number of adjusting and clamping screws. The versatility of this tool is further increased by the availability of a wide range of cutting edge widths. Holder supplied less blade. Blades are interchangeable with Iscar and Sandvik. WEDGE GRI BLADES FOR CARBIDE INSERTS ORDER NUMBER WIDTH OF CUT x HEIGHT ORDER NUMBER WIDTH OF CUT x HEIGHT ORDER NUMBER WIDTH OF CUT x HEIGHT AXA- A B USED WITH BLADE WIDTHS.8 &.9 x. SGIH 9-2/-2S*.8 or.9 x. REGULAR SGIH 9-*.2 x. REGULAR OSITIVE STO WEDGE AND LOCK SCREW ASSEMBLY FOR HOLDERS # WSA-6 HEIGHT ADJUSTMENT ASSEMBLY AXA-HA* GT STYLE ALORIS WEDGE GRI CARBIDE CUT-OFF INSERTS Catalog Number Cutting Edge Geometry Aloris GT Cut-Off Insert Cutting Width Lead Angle Grade A2 or A6 Grade 6 FOR WEDGE GRI BLADES, OSITIVE RAKE SHAR EDGE FOR MANUAL & CNC LATHES. SEE AGE 4 FOR DESCRITION OF CARBIDE GRADES. GTN 2* GT L/R 2* GTN 2.4* GT L/R 2.4* GTN * GT L/R *.2 8 GTN 4*.6 GT L/R 4*.6 8 GTN 4.8*.8 GT L/R 4.8*.8 8 GTN *.2 GT L/R *.2 8 GTN 6*.2 GT L/R 6*.2 8 GTN 8*. GT L/R 8*. 4 GTN 9*. GT L/R 9*. 4 Specify left or right hand. Call for price over quantity. Inserts are priced individually, however, they must be purchased in packages of. For blades see page 46. age 24 See full selection of inserts on pages 49 4.

27 TECHNICAL DATA: CAACITIES MODELS BXA SERIES CXA SERIES CA SERIES DA SERIES EA SERIES BXA- CXA- CA- DA- A B USED WITH BLADE WIDTHS A B USED WITH BLADE WIDTHS A B USED WITH BLADE WIDTHS A B USED WITH BLADE WIDTHS SGIH 26-2/-2S*.8 or.9 x. REGULAR OSITIVE STO SGIH 26-/-S*.2 x. REGULAR OSITIVE STO / SGIH 2-/-S*.2 x.2 REGULAR OSITIVE STO SGIH 2-/-S*.2 x.2 REGULAR OSITIVE STO SGIH 26-/-S*.2 x. REGULAR OSITIVE STO Each Each SGIH 26-4/-4S*.6 x. REGULAR OSITIVE STO Each Each SGIH 2-/-S*.8 x.2 REGULAR OSITIVE STO Each Each SGIH 2-/-S*.8 x.2 REGULAR OSITIVE STO Each Each SGIH 26-/-S*.8 x. REGULAR OSITIVE STO SGIH 26-/-S*.8 x. REGULAR OSITIVE STO SGIH 2-6/-6S*.2 x.2 REGULAR OSITIVE STO SGIH 2-6/-6S*.2 x.2 REGULAR OSITIVE STO WSA- WSA-8 WSA-9 WSA- BXA-HA* CXA-HA* CA-HA* DA-HA* Universal Mounting Aloris Super-recision Single-Dovetail Heads B Dovetail Head is supplied with removable handle as shown. The rapid tool-changing versatility and accuracy synonymous with the name Aloris, is now available to users of lathes with turret tool posts or any open slot mounting arrangement. The head is also drilled for mounting on other types of tool carriages. The newly designed models of super-precision single-dovetail heads, accepts any of the wide range of tool holders in the same series, providing quick tool changing flexibility and repeat accuracy at the flick of a handle-one quarter turn locks holder in working position within. inches of preset position everytime. Costly time loss due to repetitive realignment is eliminated. The socket wrench handle, included in the basic head price, is removable for possible clearance requirements when used on CNC lathes. A C A B C BXA-H /6 CXA-H " /6 CA-H " 2 /6 DA-H age 2

28 Miniature (MA) Tool ost and Tool Holders Super precision one dovetail tool post and tool holders are especially designed for bench lathes and jewelry lathes. Three holders hold 6 different tools, are quickly interchangeable for 6 different operations. Height adjustment for each tool bit is provided on all holders. Tool holder capacity for turning or boring is to. Tool post dimensions are x x. MA MA- MA- MA- MA-SET % Saving MA MA- Set is supplied with T and screw wrenches, less cutting tools. MA- MA- SAVE % OVER COMONENTS URCHASED SEARATELY # #2 Aloris Super-recision Intro-ro Sets recision-engineered to ensure repetitive accuracy. Advanced design provides built-in quick tool changing, versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on any engine lathe, bench or CNC lathe for a wide range of operations from fine precision work to heavy duty cutting. Tool ost # TURNING AND FACING HOLDER Takes various sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations. #2 BORING, TURNING AND FACING HOLDER V groove holds round shank boring bars and tools as well as square tool bits. Intro-ro Set includes: Super-recision Tool ost, # Tool Holder, #2 Tool Holder SERIES AXA # I BXA #2 I CXA # I CA #4 I DA # I EA #6 I -IECE STARTER SET SAVE % OVER COMONENTS URCHASED SEARATELY C SET CONSISTS OF THE FOLLOWING: Tool ost, Custom T -Bolt & Holders listed below SERIES AXA # BS BXA #2 BS CXA # BS CA #4 BS DA # BS EA #6 BS Tool ost # # #2 #4D age 26

29 SAVE % ON -IECE SETS OF TOOL OSTS AND HOLDERS Tool ost # #2 # #6 C SET CONSISTS OF THE FOLLOWING: Tool ost, Custom T -Bolt & Holders listed below SERIES AXA #-SET BXA #2-SET CXA #-SET CA #4-SET DA #-SET EA #6-SET #4D HOLDERS INCLUDED AXA- AXA-2 BXA- BXA-2 CXA- CXA-2 CA- CA-2 DA- DA-2 EA- EA-2 #8 AXA-4D BXA-4D CXA-4D CA-4D DA-4D EA-4D AXA-6 BXA-6 CXA-6 CA-6 DA-6 EA-6 AXA- AXA-8 BXA- BXA-8 CXA- CXA-8 CA- CA-8 DA-8 DA-6N EA-8 EA-6N (Blade Included) ictures do not represent actual sets. SAVE % ON AS SETS ONLY #6 #2 Tool ost #2 #4D # #8 (Blade Included) # AS SET CONSISTS OF THE FOLLOWING: Tool ost, Custom T -Bolt & Holders listed below SERIES AXA # AS BXA #2 AS CXA # AS CA #4 AS DA # AS EA #6 AS # HOLDERS INCLUDED AXA- AXA-2 BXA- BXA-2 CXA- CXA-2 CA- CA-2 DA- DA-2 EA- EA-2 (Knurls Included) AXA-4D BXA-4D CXA-4D CA-4D DA-4D EA-4D AXA- BXA- CXA-4D CA-4D DA-4D EA-6 # AXA-6 AXA- BXA-6 BXA- CXA-6 CXA- CA-4 CA-6 DA-6 DA- EA- EA-8 #6 AXA-8 BXA-8 CXA-8 CA- DA-8 EA-6N AXA- BXA- CXA- CA-8 DA-6N EA- AXA-6 BXA-6 CXA-6 CA-6 DA- AXA-2 BXA-2 CXA-2 CA- ictures do not represent actual sets. age 2

30 QUALIFIED TOOL OSTS AND HOLDERS a full range of qualified tooling to meet the rigorous repeat accuracy demands of C.N.C. Lathe operation, combined with the advantages and convenience of quick-change versatility, high-precision and superb workmanship time and job proven qualities which have made Aloris products the tools preferred by lathe craftsmen for over 4 years. The Aloris Q System provides simplicity in set-up, programming and operation of C.N.C. lathes. The point of origin (grid line), custom located for your particular lathe, is a fixed reference for setting up all tools used in the system. The Aloris Q System can also be used on conventional lathes, with superior results. CA-4Q Boring Bar Holder CA-Q Qualified Tool ost Aloris Q System Tool osts have fully qualified working surfaces. erpendiculars are accurately parallel and square to the base. For point of origin location, qualified surface data and other dimensions see below. CA-Q Turning Holder CA-_Q Morse Taper Holder Qualified Tool Holders Aloris Qualified Tool Holders are designed for use with all manually or C.N.C. Lathes. All are available in CA Q and DA Q sizes. They feature parallel and square working surfaces to assure automatic resumption of the preset qualified working position every time the holder is locked into place. CA-LQ Facing Holder CA SERIES CA-Q CA-Q CA-LQ CA-2Q CA-Q CA-4Q CA-4Q- CA-4Q- CA-4Q-2 CA-4Q- CA-4Q- CA-4Q-2 age 28 TECHNICAL DATA: MODELS CAACITIES HEIGHT ADJUSTMENT CAACITY A B " SWING TURNING HOLDER.46.9 " CA-HA* FACING HOLDER.9.86 " CA-HA* *MORSE TAER HOLDERS. #2 M.T. # M.T. #4 M.T. CA-HA* CA-HA* CA-HA* **BORING BAR HOLDERS CA-HA* " CA-HA*..62 CA-HA* CA-HA* CA-HA*..62 2" CA-HA* RELACEMENT ARTS T BOLT CA-TB* SET SCREW CAQ-SS* CAQ-SS* CAQ-SS* CAQ-SS* CAQ-SS* CAQ-SS* DA SERIES RELACEMENT ARTS HEIGHT ADJUSTMENT CAACITY T BOLT SET SCREW A B DA-Q " SWING DA-TB* TURNING HOLDER DA-Q.4. DA-HA* FACING HOLDER DA-LQ. 4. DA-HA* *MORSE TAER HOLDERS DA-Q # M.T. DA-HA* DA-4Q 2. #4 M.T. DA-HA* DA-Q # M.T. DA-HA* **BORING BAR HOLDERS DA-4Q- DA-4Q-2 DA-4Q- DA-4Q- DA-4Q-2 DA-4Q-2 DA-4Q When ordering replacement set screws please provide dimensions. " 2" 2 " DA-HA* DA-HA* DA-HA* DA-HA* DA-HA* DA-HA* DA-HA* DAQ-SS* DAQ-SS* DAQ-SS* DAQ-SS* DAQ-SS* DAQ-SS* DAQ-SS*

31 MAKE OF LATHE SWING RECOMMENDATIONS FOR BENCH, CNC AND ENGINE LATHES ALORIS TOOL OST CAACITY MAX MAX TOOL BOR. BIT TOOL ACER 4G BXA 44E & G CXA 4G CA " 28G DA 2" ALHA A BXA A4 CXA A46 CA " A DA 2" AMERICAN 4"B, 6"C & 2"D CA " 2"E & 2"F DA 2" 2"G, 2"H, 2"I & 4"J EA 2 ATLAS 6", " & 2" AXA " 4" & 6"B CA " 2"W, 2"D, 2"E DA AXELSON 2" 26 & 49 DA 2" 2F EA 2 ML6", MIL8" CXA BARER MIIL8", 2" & 22" CXA MEUSER MIIIL24", MIV24", CA or DA 2" 28" & 2" CA or DA 2" 4" & 6" CA " BOYE & 8", 2" & 22" DA 2" EMMES 2" & 2" EA 2 - BXA BRIDGEORT 6-8 CXA ROMI 2- CA " CARROL & ", 6" & 8" CXA JAMIESON " & 2 " BXA CINCINNATI " & 8" CXA HYDRASHIFT 2" CA " 26" DA 2" CINCINNATI " BXA TRAY 8" CXA LATHES CINCINNATI 4" BXA HEAVY 6" CXA DUTY 8" & 2" CA " LATHES 22" & 24" DA 2" AXA " CLAUSING Series BXA 4 & " Series CXA " BXA CLAUSING " CXA COLCHESTER " & 2" CA " CRAFTSMAN 2" AXA " DELTA " & " 4" AXA BXA " ELGIN AXA " ELLIOTT & 6 CXA ELLIOTT 8 & 2 CA " CONCORD SUER II AXA EMCO ELNOMATS BXA MAIER ELNOMATD CXA GALLIC 4" & 6" BXA MAKE OF LATHE SWING ALORIS TOOL OST CAACITY MAX MAX TOOL BOR. BIT TOOL 2" BXA GRAZIANO 4" CXA SAG 2" CA " HARDINGE AXA " HARRISON ", 2" & " " BXA CA " HENDEY 9" AXA " 2" & G BXA 2G, 4C, 4" & 6" CXA 8", 2" & 24" CA " HERCULES 4 DA or EA 2 4" CXA HERCULES 8" CA " AJAX 24" DA 2" IKEGAI 2" CA " KERRY " & " AXA " LANSING 6" CXA LEBLOND DUAL DRIVE " CXA 6, NE-2 & 26 CXA LEBLOND NF-26 & 22 CA " HEAVY NI-22 & 42 DA 2" DUTY NK-42 & 2 EA 2 " BXA LEBLOND " CXA REGAL ", 9", 2" & 24" CA " LEHMANN 6", 8" & 2" CA " BRANDES 22", 2", 2" & 6" EA 2 CXA LODGE 6, 2, 2- CA " AND & 2-2 CA " SHILEY 26 & 26-2 DA 2" 22, 26 & EA EA 2 9", ", " & 2" AXA " LOGAN 4" BXA 4" CXA " CA " MAZAK CA " 24" DA 2" " EA 2 K2 & K AXA " MISAL K4 & K6 BXA " AXA " (6 & 6) BXA K- KOMACT CXA EE & 6 (6 & 6) CA " 62 SERIES 6 CA " MONARCH 2" (6 & 6) DA 2" 62 SERIES 2 DA 2" MODEL M & 62 SER. 26 DA 2" MODEL N & 8 SER. 26 DA 2" 8 SER. 22 EA 2 MODEL NN 9 SER. 42 EA 2 6 CXA MORRI & 8 CA " SEIKI 2 DA 2" MAKE OF LATHE T NUT ORDERING INFORMATION SWING ALORIS TOOL OST CAACITY MAX MAX TOOL BOR. BIT TOOL NARDINI TT AXA TT2 AXA MS4 BXA MS6 BXA ND CXA ND CXA IN2 CA " IN2 DA SZ2 CA " SZ2 DA 2" AM2 DA 2" 2 EA 2 4 EA 2 NEBEL, 2 & 26 CXA SB-26-2 & CA or DA 2" HXB26 CA or DA 2" OKUMA LS4"LK 8"LS & 2"LS CXA CA " REED RENTICE 4" & 6" 2" CA DA " 2" RIVETT 68, R & 98 2A AXA BXA " " & " AXA " ROCKWELL 4" BXA SCHAERER 2" CA " AXA SHAR BXA CXA CA " SHELDON " AXA " " & " BXA & " CXA or CA " SHELDON SEBASTIAN " " BXA CXA or CA " SIDNEY, 69, 82 & 2 CXA 224 & 26 CA " 22 DA 2" 49 EA 2 SIGMA SN2A BXA SV8R- CXA SN46, 48 & 2 CA " SN-22, 62 & -28 CA or DA 2" SOUTH BEND 9 & AXA ", & 4 BXA 6" BXA or CXA " CA " SOUTH IND " CXA SRINGFIELD 4" & 6" CA " 8", 2", 22" & 24" DA 2" " EA 2 " BXA STANDARD 2" CXA MODERN 4" & 6" CXA or CA " 2" " CA " 2" VDF 42DSL, 8RO, CXA 2RO & 48DSL CXA M & V6 CA " E6, M6 & V8 DA 2" VOEST " & 2" CXA MAKE OF LATHE SWING A B C D E When ordering, please give name and swing of lathe or specified dimensions. lease fax the above chart with your order. Without this information T nut will be supplied blank. There is an extra charge for riser-blocks. age 29

32 ALORIS INDEXABLE TOOL OSTS FOR MANUAL AND CNC LATHES recision Engineered to Assure Repetitive Accuracy Accuracy Within Millionths! CNC Applications Super Rigidity No Shims Required Available with Anti-rotation Key (Optional) Furnished with Blank T Nut or Machined T Nut (Optional) The Aloris Indexable Tool ost allows 4 independent tool holders to be locked to the tool post simultaneously. This allows the operator to do multiple operations by means of indexing the tool post to any of the 24 locking positions. The index positioning and locking is accomplished by the same means as a turret on a CNC Lathe. This is the ultimate in productivity on Manual and CNC Lathes without indexing capabilities. Two standard Aloris Tool Holders can be mounted with no modification or you can modify some existing Aloris holders to fit the indexable tool post. SEE AGE FOR LOCKING WRENCH RICING Industry Standard Repeatability of. Some standard Aloris Tool Holders will fit if slightly modified All components heat treated and ground 24 positions, precision indexing through heat treated precision ground face gears recision engineered to assure repetitive accuracy Full length wedge lock as featured on the traditional Aloris Tool ost for ultimate rigidity Optionally furnished with antirotation key precision fit to lathe compound (eliminates rotation and movement of tool post under extreme cutting conditions) The highest quality lathe tool accessories available Only sizes required for up to 6 inch swing Over forty five years of machine tool manufacturing experience Mounting wrench included with tool post ORDERING INFORMATION SERIES SERIES SERIES SWING U " SWING " 22" SWING 22" 6" BXA-I CA-I DA-I Face Gear for Indexable Tool osts A B C D " 2 " 9 /6 A B C D 4" 9 /6 6 9 /6 A B C D " 4 8 /6 age

33 ALORIS INDEXABLE TOOL OST OTIONS T NUT BLANK BXA-I-TB* CA-I-TB* DA-I-TB* T DIM " " " T L B DIM 2 " 2 " " B L DIM 2 " " 4 " Nut and stud included. Customer to machine. Furnished with tapped hole only. OTIONAL T NUT MACHINED (FILL OUT CHART BELOW) BXA-I-TM* CA-I-TM* DA-I-TM* Machined by Aloris. Ready for installation. OTIONAL ANTI-ROTATION KEY (CUSTOMER TO FINISH C DIMENSION IN THE CHART BELOW) BXA-I-ARS* CA-I-ARS* DA-I-ARS* Semi-finished. OTIONAL C DIM. ANTI-ROTATION KEY (ALORIS TO FINISH C DIMENSION IN THE CHART BELOW) BXA-I-ARF* CA-I-ARF* DA-I-ARF* Finished and assembled by Aloris. (recision Ground.) T NUT ORDERING INFORMATION (lease Complete Chart and Fax) MAKE OF LATHE SWING A B C D E Stud When ordering, please give name and swing of lathe or specified dimensions. lease fax the above chart with your order. Without this information T nut will be supplied blank. There is an extra charge for riser-blocks. Handle Ball INDEXABLE TOOL OST RELACEMENT ARTS Not interchangeable with standard tool post parts. T BOLT ASSY = T -NUT AND STUD (INDEXABLE) BXA-I-TB* CA-I-TB* DA-I-TB* HANDLES (INDEXABLE) BXA-I-HANDLE* CA-I-HANDLE* DA-I-HANDLE* C BALLS (INDEXABLE) D B BXA-I-BALL* CA-I-BALL* DA-I-BALL* Anti-Rotational Key FLANGE NUTS (INDEXABLE) BXA-I-FN* CA-I-FN* DA-I-FN* A SQUARE T -Nut LOCKING WRENCH BXA-I-LW* CA-I-LW* DA-I-LW* age

34 #-I ALORIS INDEXABLE TOOL HOLDERS TURNING & FACING HOLDER BXA--I CA--I DA--I #-IX OVERSIZE TURNING & FACING HOLDER A B C Tool Cap /6 /6 A B C Tool Cap /6 " 2 " A B C Tool Cap 2 Turning and facing accommodates a variety of turning or facing tools. Capacity listed in chart. BXA--IX CA--IX DA--IX A B C Tool Cap A B C Tool Cap A B C Tool Cap #2-I #2-IX TURNING, FACING & BORING HOLDER OVERSIZE TURNING, FACING & BORING HOLDER /6 BXA-2-I A B C Sq Shank /6 /6 /6 2 CA-2-I A B C Sq Shank /6 " 2 " /6 2 /6 Turning and facing accommodates a variety of turning or facing tools. Capacity listed in chart. Larger tool capacity. DA-2-I A B C Sq Shank 2 " Boring, turning and facing holder accommodates round shank tools in V groove as well as turning and facing tools as the # holder. Capacity listed in chart. BXA-2-IX CA-2-IX DA-2-IX A B C Sq Shank A B C Sq Shank A B C Tool Cap /6 /6 2 /6 2 /6 #-I BORING BAR HOLDER Boring, turning and facing holder accommodates round shank tools in V groove as well as turning and facing tools as the # holder. Capacity listed in chart. Larger tool capacity. BXA--I CA--I DA--I A B D A B D A B D #4-I BORING BAR HOLDER 2 " 2 Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. Capacities listed in chart. See the full line of boring bars on page BXA-4-I CA-4-I DA-4-I A B D A B D A B D " 2" " 2 #-I CUTOFF HOLDER (CARBIDE) Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. Capacities listed in chart. See the full line of boring bars on page BXA--I CA--I DA--I B A B A B A B #-I #-I #4-I #-I A WEDGE & LOCK SCREW MORSE TAER HOLDER /6 2 9 /6 Cut-off & Grooving Holders Designed for extreme rigidity under heavy cutting conditions. See page for blades and inserts. WSA-BXA--I Clamp & Screws BXA--I WSA-CA--I Clamp & Screws CA-4-I WSA-DA--I Clamp & Screws DA--I A B Taper Hole Size A B Taper Hole Size A B Taper Hole Size # MT 2 #4 MT # MT Morse Taper Holder recision ground taper bore with tang locks. Morse Taper drills securely so operator can power feed drills with the carriage rather than manually with the conventional tailstock. age 2 Spare parts available upon request. Standard Aloris holders that can be modified by mitering the corners to prevent interference when mounting onto tool post: #, #2, #4, #4D, #, #4, #4, #, #.

35 recision Engineered to Assure Repetitive Accuracy Accuracy Within Millionths! CNC Applications Super Rigidity No Shims Required Available with Anti-rotation Key (Optional) Furnished with Blank T Nut or Machined T Nut (Optional) See page ALORIS INDEXABLE STARTER SETS FOR MANUAL AND CNC LATHES ATENT ENDING This precision engineered tool post was designed by Aloris Tool Technology Co. Inc. to solve typical problems encountered by machinists. This tool post incorporates the full length Aloris wedge design for maximum rigidity, individual height adjustments so shims are not required, and superior indexing which allows the machinist to select any of the tools which are mounted to accomplish multiple operations without removing tools from the holder absolutely reduces set-up time and cycle time, and enhances accuracy. The basic set consists of one tool post, mounting wrench, T nut blank, and four holders: pc. #-I turning and facing; 2 pcs. #2-I facing, turning, and boring; pc. #-I cutoff. Blades, inserts, and boring bars not included. Aloris recommends customers to order the indexable tool post with the optional Anti-rotation Key which avoids movement under extreme conditions. Spare parts pricing available upon request. SAVE % ON INDEXABLE STARTER SETS SERIES BXA-I CA-I DA-I BXA-I-SET CA-I-SET DA-I-SET GT STYLE WEDGE GRI CARBIDE CUT-OFF INSERTS FOR WEDGE GRI BLADES, OSITIVE RAKE SHAR EDGE FOR MANUAL & CNC LATHES. SEE AGE 4 FOR DESCRITION OF CARBIDE GRADES Catalog Number Cutting Edge Geometry Aloris GT Cut-Off Insert Cutting Width Lead Angle Grade A2 or A6 Grade 6 GTN 2* GT L/R 2* GTN 2.4* GT L/R 2.4* GTN * GT L/R * GTN 4* GT L/R 4* GTN 4.8* GT L/R 4.8* GTN * GT L/R * GTN 6* GT L/R 6* GTN 8* GT L/R 8* GTN 9* GT L/R 9* Specify left or right hand. Call for price over quantity. Inserts are priced individually, however, they must be purchased in packages of. For blades see page 46. WEDGE GRI BLADES FOR #-I HOLDERS BXA-I CA-I DA-I SGIH 9-2* SGIH 26-2* SGIH 2-* WIDTH OF CUT x HEIGHT.9 x..9 x..2 x.2 WIDTH OF CUT x HEIGHT SGIH 9-*.2 x. SGIH 26-*.2 x. SGIH 2-*.8 x.2 WIDTH OF CUT x HEIGHT SGIH 26-4*.6 x. SGIH 2-6*.2 x.2 WIDTH OF CUT x HEIGHT SGIH 26-*.8 x. See full selection of cutting tools on pages age

36 ALORIS DOUBLE-LOCK TOOL HOLDERS AVAILABLE IN RIGHT OR LEFT HAND VERSIONS AND DESIGNED TO ACCET STANDARD INSERT. A unique locking device exerts a two-way force on the carbide insert: downward and tight against shoulder to assure rigid, positive seating. STRAIGHT STYLE LEFT HAND SIDE CUTTING EDGE STYLE STRAIGHT STYLE RIGHT HAND ORDERING INFORMATION RELACEMENT ARTS HOLDER INSERT SIZE CARBIDE SEAT HEX LOCK IN LOCK SCREW SIDE CUT AD- AD6- AD8-4 AD-4 AD- AD2- RIGHT ADS- ADS6- ADS8-4 ADS-4 ADS- ADS2- LEFT ADS-L ADS6-L ADS8-4L ADS-4L ADS-L ADS2-L A B C D I.C. THICK 4 9 /6 4 /6 " " " " 6" 6" " 8" /6 /6 /6 /6 ST-* ST-* ST-2* ST-2* ST-* ST-* L-* L-* L-2* L-2* L-* L-* LS-* LS-* LS-2* LS-2* LS-* LS-* CARBIDE INSERTS FOR DOUBLE-LOCK TOOL HOLDERS DOUBLE-LOCK HOLDER # I.C. T R INSERT A2/A6 GRADE 6 STYLE TNMG NEGATIVE AD-, ADS-, ADS-L, AD6-, ADS6-, ADS6-L /6 TNM-2* STYLE TNM OSITIVE AD8-4, ADS8-4, ADS8-4L, AD-4, ADS-4, ADS-4L /6 TNMG-42* TNM-42* AD-, ADS-, ADS-L, AD2-, ADS2-, ADS2-L TNMG-4* TNM-4* Inserts are priced individually, however, they must be purchased in packages of. & up call for price. See full selection of inserts on pages age 4

37 ALORIS ROFILING TOOL HOLDERS AT & ATL AVAILABLE IN RIGHT OR LEFT HAND VERSIONS FOR TURNING OR ROFILING. THESE HOLDERS ACCOMMODATE STANDARD DIAMOND SHAE INSERTS. A unique locking device which exerts a two-way force on the insert: downward and tight against the shoulder to assure rigid, positive seating. Insert choice determines positive or negative rake turning. Holders supplied as shown less carbide inserts. RIGHT HAND SHOWN Clamp Clamp Screw HOLDER RIGHT LEFT ORDERING INFORMATION INSERT SIZE CARBIDE A B C D I.C. THICK SEAT HEX LOCK IN RELACEMENT ARTS LOCK SCREW CLAM CLAM SCREW AT-6 AT-8 AT-6L AT-8L " " 4 6" /6 OR SM-* L-* LS-* ACK-2* ASTC-4* CARBIDE INSERTS FOR ROFILING TOOL HOLDERS ALL INSERTS BELOW FIT ANY OR L TOOL HOLDERS STYLE DNGA NEGATIVE RAKE STYLE DNMG NEGATIVE I.C. T R INSERT GRADE A2/A6 6 /6 DNGA-2* STYLE DNMZ " OSITIVE STYLE DNMS OSITIVE /6 DNMG-2* DNMS-2* DNMZ-42* DNMS-42* Sold in package of pcs. & up call for price. See full selection of inserts on pages ALORIS SERIES ASIH CHAMFERING, FACING & TURNING HOLDERS Aloris ASIH Series universal holders accommodate standard square carbide inserts and are designed for chamfering, facing and turning operations. ASIH Series holders are available in four shank sizes and are designed for use in Aloris #, #2 and # quick-change dovetail tool holders or any square shank holder. Aloris ASIH Series holders accommodate " I.C. and " I.C. carbide inserts. An insert holding screw is provided. HOLDER ORDERING INFORMATION A B C D I.C. T R RELACEMENT ARTS GRADE A2/A6 6 INSERT # SCREW SIZE ASIH-2 4 ASD-8* ASD-8SCR* 8-2 x ASIH- 4 ASD-8* ASD-8SCR* 8-2 x ASIH-4 4 /6 ASD-2* ASD-2SCR* -24 x ASIH- 4 /6 ASD-2* ASD-2SCR* -24 x Sold in package of pcs. & up call for price. See full selection of inserts on pages age

38 ALORIS TURNING HOLDERS AT2 & AT2N AVAILABLE IN OSITIVE OR NEGATIVE RAKE VERSIONS AND DESIGNED TO ACCET STANDARD TRIANGULAR INSERTS. Adjustable carbide chipbreaker provides excellent chip control. Holders supplied as shown less carbide inserts. CARBIDE CHIBREAKER CARBIDE SHIM CHIBREAKER CLAM SCREW SHIM SCREW HOLDER ORDERING INFORMATION RELACEMENT ARTS CHIBREAKER INSERT SIZE CARBIDE SHIM SHIM SCREW CARBIDE CHIBREAKER CLAM SCREW OS. AT2-2 AT2- AT2-4 AT2N- AT2N-4 A " " B " " C 4 4 6" 4 6" D /6 /6 " /6 " I.C. THICK /6 /6 SM-4* SM-4* SM-* SM-42* SM-26* SM-4SS* SM-4SS* SM-SS* SM-42SS* SM-26SS* CARBIDE INSERTS FOR AT2 AND AT2N HOLDER # AT2-2 TG-22* -R* -R* 2-R* -R* 2-R* INSERT GRADE I.C. T R A2/A6 6 SCR-2* SCR-2* SCR-2* SCR-2* SCR-2* AT2- TG-22* AT2-4 /6 TG-42* HOLDER # I.C. T R INSERT GRADE A2/A6 6 AT2N- TNG-2* AT2N-4 /6 TNG-42* Sold in package of pcs. & up call for price. See full selection of inserts on pages ALORIS SOCKET SCREW T WRENCHES These indispensable tools are essential in every Tool Room, Machine Shop, and to all other industrial users. Especially useful in hard-to-reach places. Speeds up all socket screw fastening. Greater torque pressure can be applied easily. Drivers are made of Special Alloy Steel, hardened for longer service. Each set of 8 comes in own plastic case. T -WRENCH TW-* TW-2* TW-* TW-4* TW-* TW-6* TW-* TW-8* ORDERING INFORMATION WIDTH ACROSS FLATS /6 /6 OVERALL LENGTH TW SET* ( OF EACH) age 6

39 ALORIS THREADING TOOL HOLDER MODEL AT-8 AT-8 Especially designed to hold interchangeable high speed and carbide insert threading blades. When the cutting blade is mounted on the upper surface of the holder, and spindle direction reversed, thread cutting can be accomplished without danger of hitting shoulders, thereby speeding up threading operation. Lead angle adjustment is obtained through set screw changes. Various pitches of precision ground high speed steel threading blades for cutting American standard 6, and Acme 29, threads are available. Carbide inserts conveniently mount in place of the high speed blade when required. lease review the combination of high speed and carbide options listed below. HIGH SEED THREADING BLADES 6 Exclusive blade design with two cutting edges, precision ground, assures unusually long life. To resharpen, simply grind the top surface. All blades are uniformly designed to fit any Aloris threading holder. CAACITY -4 4 or more T..I -6 6 or more T..I - or more T..I HIGH SEED THREADING BLADES ACME 29 Exclusive blade design with two cutting edges, precision ground, assures unusually long life. To resharpen, simply grind the top surface. All blades are uniformly designed to fit any Aloris threading holder. AC- CAACITY T..I AC-4 4 T..I AC- T..I AC-6 6 T..I AC- T..I AC-8 8 T..I AC-9 9 T..I AC- T..I AC-2 2 T..I AC-4 4 T..I AC-6 6 T..I THREADING BLADE GAUGE Gauge is used for quick and accurate checking of re-ground high speed parting or threading blades to maintain proper angle for accurate thread cutting. GA #8 THREADING INSERT HOLDER AND INSERT 6 Blade is reversible and has an adjustable insert for resharpening purposes. Inserts are stocked in grade A2 and A6. When ordering specify grade desired, otherwise grade A6 will be supplied. Blade fits any Aloris threading holder. HOLDER AT-86 CAACITY 6 TO 48 T..I. THREADING CARBIDE INSERT FOR HOLDER # AT-86 STYLE TI INSERT 6 V 6 48 AT-4R* GRADE A2/A6 6 STAND U INSERT CARTRIDGE Aloris Series V Threading Cartridge for two triangular 6 threading inserts CARTRIDGE AT-V A Dim. sq. B Dim. /6 C Replacement Screw # AGTS-* D Replacement Screw # /6 8x shcs CLAM # CLAM SCREW # INSERT IC ACK-9* ASTC-9* KEY # T- C Screw AT-2V sq. AGTS-2* /6 8x shcs ACK-9* ASTC-9* T-2* D Screw INSERTS: EXTERNAL VERTICAL 6 TRIANGULAR THREADING INSERTS USED WITH INSERT STYLE TI IC L CARTRIDGE 6 8+ os AT-V TMC-2NV* 6 8+ Neg AT-V TNMC-2NV* GRADE A2/A os AT-2V TMC-4NV* 6 6+ Neg AT-2V TNMC-4NV* LAYDOWN INSERT CARTRIDGE Aloris Series H Threading Cartridge for two triangular 6 threading inserts LH RH AT-H A Dim. sq. B Dim. C Replacement D Replacement Screw Screw ASA-T /6 8x lg shcs INSERT IC KEY # T-* AT-2H sq. /6 ASA-4T /6 8x lg shcs T-2* C Screw D Screw INSERTS: ARTIAL ROFILE 6 TRIANGULAR THREADING INSERTS STYLE TI IC L USED WITH INSERT CARTRIDGE 6 V-RH 8 48 os AT-H 6ER-LAG6-RH* 6 V-LH 8 48 os AT-H 6ER-LAG6-LH* GRADE A2/A6 6 6 V-RH os AT-2H 22ER-LN6-RH* 6 V-LH os AT-2H 22ER-LN6-LH* Sold in package of pcs. & up call for price. See full selection of inserts on pages age

40 ALORIS ADJUSTABLE-SHANK TOOL HOLDERS FOR LEFT OR RIGHT HAND TURNING, FACING OR CHAMFERING. Two-way adjustable rake with cutting angle positive stop Crt. cradle lock screw The adjustable shank feature introduces added flexibility turning the shank 9 permits choice of shank and cutting tool alignment. The cartridge, with its 2 indexing positions at intervals, provides for many angular turning operations. See page for cartridge details. The two-way adjustable rake provides for right or left hand turning, facing and chamfering. Rake has cutting angle with positive stop. Adjustment is made by loosening cradle lock screw and selecting desired setting. in Cartridge lock screw Standard carbide insert Tool steel cartridge Cartridge cradle ILLUSTRATIONS SHOW WHAT ONE SINGLE TOOL CAN ACCOMLISH Standard triangular carbide insert has 6 cutting edges. ICTORIAL DIAGRAM OF CARTRIDGE CARTRIDGE has 2 indexing positions at intervals. This means many angular turning and chamfering jobs can be done faster and easier. Exclusive positive lock with 2-way force holding insert down and tight against shoulder. Tool Steel Cartridge adjuster every for right or left hand turning facing or chamfering. 2 positive lock positions. ORDERING INFORMATION HOLDER CARTRIDGE RELACEMENT ARTS HEX LOCKING IN LOCKING SCREW CRADLES A B C D H H AT-2 4" " 4 CRT-2* L-2* LS-2* CC-2S* AT-4 4 " /6 /6 /6 CRT-* L-* LS-* CC-S* CARBIDE INSERTS FOR ALORIS ADJUSTABLE-SHANK TOOL HOLDERS STYLE TNMG NEGATIVE STYLE TNM OSITIVE STYLE TNMS OSITIVE HOLDER # AT-2 HOLDER # AT-4 CARTRIDGE # CRT-2 CARTRIDGE # CRT- INSERT GRADE I.C. T R A2/A6 6 /6 TNMG-2 TNM-2 TNMS-2 I.C. T R /6 INSERT TNMG-42 TNM-42 TNMS-42 Inserts are priced individually, however, they must be purchased in packages of. GRADE A2/A6 6 & up call for price. See full selection of inserts on pages age 8

41 MINI SWIVEL-CARTRIDGE TOOL HOLDERS FOR LEFT OR RIGHT HAND TURNING, BORING, FACING AND CHAMFERING. Short Long Integral High-Speed Steel Swivel Head Insert Clamp Screw Carbide Insert Swivel Head tool holder can be used with cartridge or high-speed steel swivel head. Indexing of every permits many angular turning and boring operations. Adjustment is made by just one turn of the lock screw, and selecting desired setting 2 positive lock positions. The cartridge accommodates triangular carbide insert with rake allowing internal and external threading. The high-speed steel swivel head has 6 included angle and can be ground to various job requirements. Swivel Clamp Screw a short version with all of the desirable features of the holder described at left. Designed for mounting in boring bars, such as Aloris BB series for angular boring and threading. In addition, the short holder can be used in Aloris quick-change tool holders #6, #9 and #8 for multiple turning. For carbide insert and high-speed steel swivel heads, see table above. ORDERING INFORMATION TOOL HOLDER SHORT SHANK SIZE SAVE 2% ON SET OF HIGH SEED SWIVEL HEAD RELACEMENT ARTS SWIVEL CLAM SCREW For Hi-Speed & Carbide Swivel Head CARBIDE INSERT SWIVEL HEAD INSERT CLAM SCREW AT-S AT-S x x 2 x x 2 ATS-SET CRT-H* CRT-H* LS-C* LS-C* CRT-* CRT-* LS-2L* LS-4* AT-S x x CRT-H* LS-C* CRT-* LS-6* AT- AT- ORDERING INFORMATION TOOL HOLDER LONG SHANK SIZE x x 4 x x MIN. BORE DIA. " SAVE 2% ON SET OF HIGH SEED SWIVEL HEAD CRT-H* ATL-SET CRT-H* RELACEMENT ARTS SWIVEL CLAM SCREW For Hi-Speed & Carbide Swivel Head LS-C* LS-C* CARBIDE INSERT SWIVEL HEAD CRT-* CRT-* INSERT CLAM SCREW LS-2L* LS-4* AT- x x 6 CRT-H* LS-C* CRT-* LS-6* CARBIDE INSERTS FOR MINI SWIVEL-CARTRIDGE TOOL HOLDERS HOLDER # AT-,S AT-, S AT-, S Sold in package of pcs. & up call for price. CARBIDE INSERT INSERT GRADE SWIVEL HEAD # I.C. T R A2/A6 6 CRT- CRT- CRT- /6 /6 ATG-2* ATG-4* ATGHL-4* ATGHR-4* ATG-4* ATGHL-4* ATGHR-4* See full selection of inserts on pages age 9

42 ALORIS CARTRIDGE-HEAD BORING BAR FOR DEE HOLE BORING OERATIONS The Aloris boring bar/cartridge combination is designed for maximum rigidity, will not permit tool deflection. All parts are heat treated for maximum strength. The cartridge, with its 2 indexing positions at intervals, provides for many angular boring operations. Angular positions are illustrated below. The two-way adjustable rake provides cutting angle with positive stop. Adjustment is made by loosening cradle lock screws and selecting desired setting. Cartridge cradle ICTORIAL DIAGRAM OF CARTRIDGE CARTRIDGE has 2 indexing positions at intervals. This means many angular turning and chamfering jobs can be done faster and easier. Standard triangular carbide insert has 6 cutting edges. Exclusive positive lock with 2-way force holding insert down and tight against shoulder. Tool Steel Cartridge adjuster every for right or left hand turning facing or chamfering. 2 positive lock positions. ORDERING INFORMATION RELACEMENT ARTS BORING BAR MIN. BORE TOTAL CARTRIDGE CARTRIDGE CRADLE HEX LOCKING IN DIA. LENGTH S D C L CBB4-2 CBB-2 CBB " 8" 22" /6 2" 2 2 " CRT-2* CC-4* L-2* /6 /6 CRT-2* CC-* CRT-* CC-6* L-2* L-* LOCKING SCREW LS-2* LS-2* LS-* CARBIDE INSERTS FOR ALORIS CARTRIDGE-HEAD BORING BARS STYLE TNMG NEGATIVE STYLE TNM OSITIVE BORING BAR # CBB4-2 CBB-2 CARTRIDGE # CRT2 I.C. T R Inserts are priced individually however, they must be purchased in packages of. /6 INSERT GRADE A2/A6 6 TNMG-2* TNM-2* TNMS-2* & up call for price. STYLE TNMS OSITIVE BORING BAR # CBB6- CARTRIDGE # CRT I.C. T R /6 INSERT TNMG-42* TNMS-42* TNM-42* GRADE A2/A6 6 Inserts are priced individually, however, they must be purchased in packages of. & up call for price. age 4 See full selection of inserts on pages 49 4.

43 ALORIS ADJUSTABLE CHIBREAKER BORING BARS Heat-treated alloy steel Supplied with adjustable carbide chip-breaker and carbide shim to protect the boring bar Accommodates standard positive rake triangular inserts Used for boring to square shoulder Can be used with open slot holders # and #2, as well as heavy duty holders #4, #4, #4D, #4D, #, #4, #4 Chip-Breaker is adjustable for perfect chip control Triangular Carbide Insert Buttonhead Chip-Breaker Clamp Screw BORING BAR CBB- CBB-2 CBB- CBB-4 ORDERING INFORMATION RELACEMENT ARTS BORING BAR SIZE MIN. INSERT SIZE ADJUSTABLE CHIBREAKER CHIBREAKER CLAM SCREW CARBIDE SHIM BORE Square Round Length DIA. I.C. Thick 8" CB-* SCR-* SM-4* " 2" CB-* SCR-2* SM-4* /6 4" /6 CB-* SCR-* SM-4* 6" /6 CB-46* SCR-2* SM-* CARBIDE SHIM SCREW SM-4SS* SM-4SS* SM-4SS* SM-SS* INSERTS FOR ADJUSTABLE CHIBREAKER BORING BARS I.C. T R /6 INSERT GRADE A2/A6 6 TG-22* TG-42* Inserts are priced individually, however, they must be purchased in packages of. & up call for price. See full selection of inserts on pages ALORIS REVERSIBLE BORING BARS FOR SQUARE TOOL BITS The Aloris boring bars are designed for 4 and 9 cutting tool positions. Both ends of the boring bar are broached in the same plane, so that either end can be used after removing the bar from the holder. NOTE: All boring bars are supplied with screw wrench and tool bits. BORING BAR BB- BB-2 BB- BB-4 BB- BB-6 BB- BORING BARS FOR SQ. TOOL BITS DESIGNED IN TWO MODELS: ONE FOR 4, OTHER FOR 9 CUTTING TOOL OSITION DIA. " 2" 2 LENGTH " 2" 4" 6" 22" 24" " SQUARE CUTTER /6 /6 BORING BAR FOR 9 BB-8 CUTTING ANGLE BB- FOR 4 BB-9 CUTTING ANGLE BB- DIA. LENGTH TOOL BIT " " 6" 9" 6" 9" /6 /6 age 4

44 ALORIS ADJUSTABLE INSERT BORING BARS An adjustable throw-away insert, boring bar designed especially for through boring, facing, or boring to a square shoulder or any lead angle. Fast, accurate positioning of the replaceable insert is accomplished by the simple adjustment of the positioning socket set screw and the locking flat head socket cap screw while the bar is mounted on the machine. For use with a lathe boring holder, milling machine, jig bore, CNC lathe, etc., the Aloris adjustable-insert boring bars are available in 4 popular sizes ranging from " to " shank diameters. They are offered as single units; or in a set, saving up to %. All boring bars are products from high quality heat treated steel. Flat Head Socket Cap Screw Socket Head Adjustment Screw % SAVING ON SET OF 4 BORING BARS BS set consists of BS BS2 BS BS4 BL set consists of BL BL2 BL BL4 ORDER # BS- BS-2 BS- BS-4 BS- BS-6 SULIED WITH A-6 CARBIDE INSERT ORDERING INFORMATION (SHORT) SAVE % LEAD ANGLE ON SET OF 4 MIN. BORE ADJUSTMENT INSERT ADJUSTMENT SCREW DIA. A SIZE D L BS-SET 9 /6 /6 / " 6" L I.C. I.C. /6 I.C. I.C. I.C. I.C. SAS-* SAS-* SAS-* SAS-2* SAS-* SAS-2* RELACEMENT ARTS INSERT CLAM SCREW LS-4* LS-4* LS-6* LS-8* LS-4* LS-8* ORDER # SAVE % ON SET OF 4 ORDERING INFORMATION (LONG) MIN. BORE DIA. ADJUSTMENT A D L L INSERT SIZE LEAD ANGLE ADJUSTMENT SCREW RELACEMENT ARTS INSERT CLAM SCREW BL- " I.C. SAS-* LS-4* BL-2 BL- BL-SET 9 /6 6" " I.C. /6 I.C. SAS-* SAS-* LS-4* LS-6* BL-4 /6 8" I.C. SAS-2* LS-8* BL- BL-6 /6 /6 " 9" 9" " " I.C. I.C. SAS-2* SAS-2* LS-8* LS-8* FOR INSERTS SEE OOSITE AGE age 42

45 ALORIS INDEXABLE CARBIDE INSERT BORING BARS Bars are made of alloy steel and heat treated for maximum rigidity. opular triangular positive rake inserts are held securely by a flat head screw. Available to bore holes with minimum size of /6 in manual and CNC lathes, also excellent in boring heads. May be cut to length using an abrasive cut off wheel. BORING BAR CBB- CBB-2 CBB- CBB-4 CBB- CBB-6 CBB- CBB-S MIN. BORE DIA. /6 9 /6 /6 /6 /6 /6 SULIED WITH A-6 CARBIDE INSERT D L /6 9 /6 " " 4" " 6" " 8" 9" 9" 2" *INSERT SIZE I.C. I.C. I.C. /6 I.C. I.C. I.C. I.C. I.C. INSERT CLAM SCREW LS-4* LS-4* LS-4* LS-6* LS-8* LS-8* LS-8* LS-8* INSERTS FOR ALORIS ADJUSTABLE AND CARBIDE INSERT BORING BARS STYLE ATG STYLE ATGHL I.C. T R STYLE ATG-4* GRADE A2/A6 6 ATGHL-4* /6 ATG-4* /6 ATGHL-4* ATG-642* ATGHL-642* /6 ATD-8* /6 ATDHL-8* Inserts are priced individually, however, they must be purchased in packages of. & up call for price. See full selection of inserts on pages age 4

46 ALORIS SERIES ATB INTERNAL THREADING BARS Aloris ATB Series threading bars can be used for internal right or left-hand threading. Available in five sizes, these bars accommodate standard triangular-shaped throwaway threading inserts in a hardened seat. The ATB Series shank has three flat sides specially designed for use in Aloris boring bar holders #, #2, #, #4 and # 4. They may also be used in any Aloris boring bar holder. Excellent for CNC machines. ORDERING INFORMATION RELACEMENT ARTS BORING BAR INSERT SCREW KEY SHIM RIGHT HAND LEFT HAND A B C D L I.C. ATB-R ATB-L 6 ASA2T* T8* ATB-2R ATB-2L " ASAT* T* ATB-R ATB-L " 2 " " ASAT* T* ATB-4R ATB-4L /6 2 /6 2" ASAT* T* ATB-R ATB-L /6 4" ASA4T* T2* YI4(RH)* YE4(LH)* 6 ARTIAL ROFILE INTERNAL CARBIDE THREADING INSERTS RH LH USE WITH BORING BAR # RIGHT HAND LEFT HAND I.C. THREADS (TI) GRADE A2/A6 6 ATB- AIT-R6* AIT-L6* 6-48 ATB-2--4 AIT-R6* AIT-L6* 8-48 ATB- AIT-R6* AIT-L6* - Inserts are priced individually, however, they must be purchased in packages of. & up call for price. age 44

47 ALORIS AT-9 ADJUSTABLE KNURLING HOLDER " " 2" max excellent knurling, with approach adjustability, is provided with the newly designed AT-9 knurling holder. The AT-9 is self-centering and is adjusted by means of a conveniently located knurled knob, providing the ideal near-verticalaxis approach angle for a wide range of stock diameters. Spindle and crossslide pressure are minimal, thus knurling of thin wall tubing is easily performed. The Aloris AT-9, which is designed for use in any standard turret tool post or other open-slot holder, is also availalbe with dovetail mounting (series 9) to fit Aloris tool posts. recision ground, " O.D. x " wide, high-speed medium diamond knurls are supplied unless otherwise specified. 4" AT-9 ALORIS AT-2 COMBO CNC BAR ULLER KNURLING TOOL " " " mounts into tool slot on CNC turrets easily adjustable with knurls installed the range is " 2". Opposing forces on knurls create little or no force on the machine. Just remove the two knurl lock screws, replace with bar grippers and use as a heavy duty bar puller. There are no gripper springs to remove when changing bar diameters. Just loosen the lockscrew, insert allen wrench and dial to the next size, preload approximately rev., lock locking screw. Furnished with " shank without knurls or grippers. Minimum clearance required between turret and covers is ". AT-2 " min to 2" max BAR GRIERS GRIER (pair) AT-2G* HIGH SEED KNURLS For #, #9, #2 Holders: AD-Diamond/AS-Straight/NEW Convex Hi-Cobalt (ACD-Spiral & ACS-Straight) KNURL AD6R/AD6L/AS6* ACD6R/ACD6L/ACS6* COARSE AD2R/AD2L/AS2/AD2R* AD2L/AS2/ACD2R/ACD2L* ACS2/ACD2R/ACD2L/ACS2* MEDIUM ADR/ADL/AS* ACDR/ACDL/ACS* FINE (NEW) TiN COATED KNURL-LOCK SCREW SCR-* Used with any #, #9 and #2 holder age 4

48 ALORIS UNIVERSAL LATHE SINDLE AND COLLET STOS FOR USE IN CNC, MANUAL LATHES & INDEXING HEADS Fully adjustable to fit a wide variety of applications (ranges listed in chart below). Cut time dramatically on jobs where the part must be registered in machine more than one time or where more than one part is to be machined. Just slide the body into the spindle of the machine, rotate the T-handle wrench which expands keys which lock the body securely into position. When the chuck or collet is opened, and the next piece loaded into machine all distances from the stop will repeat exactly. DESIGN FEATURES: Completely self-centering. C ➃ Only a few seconds to install. Greater rigidity insures duplication. ➂ Cannot vibrate or change position once it is locked. Rejections cut to a minimum. ➅ ➁ ➀ ➄ B A COMLETE SET CONSISTS OF: ➀ Body, with adjustable locking jaws and threaded and tapered pin which has square end shank and spring loaded locking ball. ➁ Short extension bar. ➂ Long extension bar. ➃ Bar for use with collets. ➄ Socket T-handle wrench. ➅ Removable cup, to fit short and long extension bars, for use when machining tubing. S- S- S- S-2 S- S-4 S- ORDERING INFORMATION A B C 4 / /6 6 6 /6 6 9 Spindle stop is supplied with screw wrenches. TO FIT SINDLE SIZE 9 /6" to 2 " " to /6" " to " /6" to /6" " to 2 /6" 2 " to " " to 4 " SINDLE STO RELACEMENT ARTS S- S- S- S-2 S- S-4 S- Body with Scr/Gibs/Rings* Taper Screw* Gibs (Set of )* O Rings (Set of 2)* Long Extension* Short Extension* T-Handle Wrench* age 46

49 SGIH CUT-OFF & GROOVING BLADES Regular Style Inserts are securely held in Wedge Grip blades by a tapered locking system. No additional clamping devices are required. Extraction tool included. ositive Stop Style Inserts are securely held in Wedge Grip blades by a tapered locking system featuring a ositive Stop that prevents insert drift and the blade pocket from spreading once the insert is set firmly in place. No additional clamping devices are required. Wedge Grip ositive Stop blades are used with existing GTN inserts and tool blocks. ORDERING INFORMATION Designation ositive Regular Stop SGIH S* SGIH 9- SGIH S* SGIH 26- -S* SGIH S* SGIH 26- -S* SGIH S* SGIH 2- -S* SGIH S* SGIH 2- -S* SGIH S* SGIH S* SGIH S* Width=W ±.4.8/.9.2.8/ / / D Max. 4 4 A /6 /6 /6 L 4 /6 4 /6 4 /6 4 /6 4 /6 H H See page 4 for price Insert Style GTN/R/L -2, 2.4 GTN/R/L - GTN/R/L -2, 2.4 GTN/R/L - GTN/R/L -4 GTN/R/L -4.8, GTN/R/L -6 GTN/R/L - GTN/R/L -4 GTN/R/L -4.8, GTN/R/L -6 GTN/R/L -8 GTN/R/L -9 Quantities over, call for price. CNC Tool Blocks SGTBN Series Simple block design accommodates Wedge Grip and competitive blade systems. Unique wedge clamp provides firm seating for light and heavy duty cut-off and grooving operations. Two piece design provides stability, strength and correct alignment of blade for maximum performance. The two piece design facilitates easy installation to many CNC machining centers. Can be utilized for left or right hand operations. ORDERING INFORMATION Catalog Number A SGTBN 6-2* SGTBN 6-* SGTBN 9-* SGTBN 2-* SGTBN 9-6* SGTBN 2-6* SGTBN 2--6* SGTBN 8.6* For large quantities, call for price... B 2 2 C /6 /6 /6 /6 4 /6 4 /6 4 /6 4 /6 D /6 E /6 /6 / Blade Styles Regular or ositive See above SGIH 9-2 SGIH 26-2 SGIH 26- SGIH 26-4 SGIH 26- SGIH 26-6 SGIH 2- SGIH 2-4 SGIH 2- SGIH 2-6 SGIH 2-6 SGIH 2-8 SGIH 2-9 age 4

50 ALORIS # CUT-OFF SYSTEM # Holder without blade. # Holder with original high-speed cut-off blade. # Holder with NEW wedge lock carbide insert blade. Aloris GT Inserts. # Holder Series Ordering # AXA- AXA-R BXA- BXA-R CXA- CXA-R CA- CA-R DA- DA-R EA- EA-R High Speed Cut-Off Blade Ordering # -2 width " - width.2" -W width.2" - width.8" -8 width.8" -8 width.8" Wedge Grip Carbide Insert Blade Ordering # SGIH 9-C-A SGIH 26-4C-B SGIH 26-4C-CX SGIH 2-4.8C-C SGIH 2-4.8C-D SGIH 2-4.8C-E Aloris GT Cut-Off Insert Carbide Inserts Ordering # GTL, GTN, GTR width.2 GTL 4, GTN 4, GTR 4 width.6 GTL 4, GTN 4, GTR 4 width.6 GTL 4.8, GTN 4.8, GTR 4.8 width.8 GTL 4.8, GTN 4.8, GTR 4.8 width.8 GTL 4.8, GTN 4.8, GTR 4.8 width.8 Catalog Number Cutting Edge Geometry Cutting Width Lead Angle Grade A2 or A6 Grade 6 TOOL GTR- WIDTH GTN 2* GT L/R 2* GTN 2.4* GT L/R 2.4* GTN * GROOVING GT L/R *.2 8 HAND OF TOOL R=RIGHT, N=NEUTRAL, L=LEFT GTN 4* GT L/R 4* GTN 4.8*.8 ick the grade to fit your application. 6 A strong steel cutting grade ideal for cut-off and grooving applications, coated with Titanium Nitride (gold) for additional wear properties. A2 Our best fine-grain uncoated grade for cast iron, nonferrous metals and high-temp alloys. A6 A strong steel cutting grade, uncoated, for low to medium speed operations. GT L/R 4.8* GTN * GT L/R * GTN 6* GT L/R 6* GTN 8* GT L/R 8* GTN 9* GT L/R 9* Inserts are priced individually, however, they must be purchased in packages of. GT Cut-Off Inserts Available ositive, and High ositive Available in Neutral, Left Hand, Right Hand, Coated & Uncoated Insert Information on ages 49 to 4. age 48

51 ALORIS CARBIDE INSERTS A-2 A specially formulated grade of tungsten carbide with a unique combination of high strength and abrasion resistance. The A-2 is an excellent choice for cast iron, high temperature alloys, and non-ferrous materials. A-2 An uncoated grade used for machining 2 + series stainless steel; cast iron (gray), malleable irons, ductile irons, brass, bronze, carbon, plastic, fiberglass, high temp alloy, nickel and cobalt base. [i.e. rene 4, (inconel w, x, 2, 8) (m 22 washpaloy) hastelloy, inconel 6, TD-2, HS2, HS, HS 6, L 6) titanium {i.e. (Ti A-2. SN) (Ti ) (Ti 6A-4V) (Ti 6 A- 6V-2n) (Ti A-4 Mo) (Ti 8 A Mo-V) (Ti A ) (Ti A) (Ti 4A) aluminum (i.e. 2T, 242T, 66T] A-6 A specially formulated grade of tungsten carbide with an excellent combination of toughness and hardness for turning, boring, and grooving on steel and alloyed cast iron. The A-6 may be utilized at moderate cutting speeds with medium feeds. A-6 An uncoated grade used for machining low, medium, and high carbon steel [i.e.,, 2, series], alloy steel [i.e., 2,, 4,, 8 series], cast steel [i.e. carbon and alloy], nodular iron. 6 A specially formulated substrate carbide grade with a (gold) multi-layer coating with a broad application range for turning, milling, grooving, and cut-off purposes. The 6 exhibits high hardness at elevated temperatures and it also works well in most large depths of cut. This grade accommodates moderate to high speed machining on low, medium, and high carbon steels as well as alloy and tool steels. 6 A coated grade used for machining low, medium, and high carbon steel [i.e.,, 2, series], alloy steel [i.e, 2,, 4,, 8 series], cast steel [i.e. carbon and alloy], nodular iron. SHAE OR CHIBREAKER DEICTED I.C. THICK- NESS RADIUS HOLE GRADES GRADE A2/A6 GRADE 6 ASD-8* ASD-2* /6 AT-4R* ATG ATD-8* ATDHL-8* /6 / ATG-2* /6.288 ATG-4*.94 ATGHL ATG-4* ATG-642* / ATGHL-4*.94 ATGHL-4* /6.469 ATGHR ATGHL-642*.2 ATGHR-4*.94 ATGHR-4* /6.469 CNMG-4 MN* /6.2 CNMG-42 MN* /6.2 CHIBREAK MN CNMG-4 MN* /6.2 CNMG-44 RN* /6 /6.2 CNMG-42 RN*.2 CNMG-4 RN*.2 CHIBREAK RN CNMG-642 RN*.2 CHIBREAK MN CNMG-64 MN*.2 CHIBREAK RN CNMG-644 RN* /6.2 CNMZ-42 M* /6.2 CNMZ-4 M*.2 CNMZ-642 M*.2 CNMZ CNMZ-64 M*.2 Quantities of and over, call for price. Inserts sold in packages of. age 49

52 ALORIS CARBIDE INSERTS SHAE OR CHIBREAKER DEICTED DNGA-2* I.C. THICK- NESS /6 RADIUS HOLE.2 GRADES GRADE A2/A6 GRADE 6 DNGA DNGA-42* DNGA-4*.2.2 DNMG DNMG- LR-* DNMG-2 LR-* /6 /6.. CHIBREAK MN DNMG- MN* /6. DNMG DNMG-4 LR-* /6.2 DNMG-42 LR-* /6.2 OSITIVE DNMS-42*.2 CHIBREAK MN DNMZ-42 M* /6.2 CHIBREAK MN DNMZ-2 M* /6.2 CHIBREAK MN DNMZ-42 M*.2 NT-2 R & L HND* NT- R & L HND* NT NT-4 R & L HND* NT-2 OS R & L HND* NT- OS R & L HND* NT NT-4 OS R & L HND* TNG 2* TNG 22* TNG 2* TNG 4* /6 TNG 42* /6 TNG TNG 44* /6 TNMA TNMA TNMA 2 NT 6* TNMA 2 NT 8* TNMA 2 NT * TNMA 2 NT 2* TNMA 4 NT 4* TNMA 4 NT * TNMA 4 NT 6* TNMA 4 NT 8* TNMA 4 NT * TNMA 2 NV* TNMA 4 NV* TNMA 4 NV* TNMA 64 NV* TNMA 66 NV* Quantities of and over, call for price. Inserts sold in packages of. age

53 ALORIS CARBIDE INSERTS SHAE OR CHIBREAKER DEICTED TNMC 2 NT 6* I.C. THICK- NESS RADIUS HOLE.2. GRADE GRADE A2/A6 GRADE 6 TNMC 2 NT 8*.2. TNMC 2 NT *.2. TNMC 2 NT 2*.2. TNMC 4 NT 4*.89.2 TNMC 4 NT *.89.2 TNMC 4 NT 6*.89.2 TNMC 4 NT 8*.89.2 TNMC TNMC 4 NT *.89.2 TNMC 2 NV* TNMC 4 NV* TNMC 4 NV* TNMC 64 NV* TNMC TNMC 66 NV* TNMG-22 MN*.9 TNMG-222 MN*.9 TNMG- MN* /6. TNMG-2 MN* /6. TNMG- MN* /6. TNMG-4 MN* /6.2 TNMG TNMG-42 MN* /6.2 CHIBREAK RN TNMG-4 RN* /6.2 CHIBREAK MN TNMG-42 MN*.2 TNMG-4*.2 TNMG TNMG-44* /6.2 TNMS-* /6. TNMS-2* /6. TNMS-4* /6.2 TNMS TNMS-42* /6.2 TNM-2* /6. TNM TNM-42* TNM-4* /6.2.2 Quantities of and over, call for price. Inserts sold in packages of. ALORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY AVENUE.O. BOX 29 CLIFTON, NJ -29 TEL : FAX: TOLL FREE: aloris@aloris.com WEBSITE: The originator of quick change tooling age

54 ALORIS CARBIDE INSERTS SHAE OR CHIBREAKER DEICTED I.C. THICK- NESS RADIUS HOLE GRADES GRADE A2/A6 GRADE 6 TG-22* TG-222* TG-22* TG-224* /6 TG-2* TG-22* TG-2* TG-24* /6 TG-4* /6 TG-42* /6 TG-4* /6 TG TG-44* /6 /6 TMA 2 NT 6*.2. TMA 2 NT 8*.2. TMA 2 NT *.2. TMA 2 NT 2*.2. TMA 4 NT 4*.89.2 TMA 4 NT *.89.2 TMA 4 NT 6*.89.2 TMA 4 NT 8*.89.2 TMA TMA 4 NT *.89.2 TMA 2 NV* TMA TMA 4 NV* TMC 2 NT 6*.2. TMC 2 NT 8*.2. TMC 2 NT *.2. TMC 2 NT 2*.2. TMC 4 NT 4*.89.2 TMC 4 NT *.89.2 TMC 4 NT 6*.89.2 TMC 4 NT 8*.89.2 TMC TMC 4 NT *.89.2 TMC 2 NV* TMC TMC 4 NV* TU-2* TU-22* TU-2* TU TU-24* /6 Quantities of and over, call for price. Inserts sold in packages of. age 2

55 ALORIS CARBIDE INSERTS SHAE OR CHIBREAKER DEICTED I.C. THICK- NESS RADIUS HOLE GRADES GRADE A2/A6 GRADE 6 WNMG- MN* /6. WNMG-2 MN* /6. WNMG- MN* /6. WNMG-4 MN* /6.2 WNMG-42 MN* /6.2 WNMG WNMG-4 MN* /6.2 Quantities of and over, call for price. LAY DOWN THREADING INSERTS SHAE OR CHIBREAKER DEICTED I.C. THICK- NESS RADIUS HOLE GRADES X Y TI A2/A6 GRADES 6 4 AIT-R6* AIT-L6* AIT-R6* AIT-L6* AIT-R6* AIT-R/L6 2 AIT-L6* ER LAG 6-RH* ER LAG 6-LH* ER/L6 22ER LN 6-RH* ER LN 6-LH* Inserts sold in packages of. NOW AVAILABLE FROM ALORIS ALORIS/YES TOOL QUICKTI DRILLS CALL FOR A COMLETE CATALOG age

56 ALORIS CUT-OFF AND GROOVING INSERTS TOOL GTR- WIDTH GROOVING HAND OF TOOL R=RIGHT, N=NEUTRAL, L=LEFT Catalog Number GTN 2* GT L/R 2* GTN 2.4* GT L/R 2.4* GTN * GT L/R * Cutting Edge Geometry GT Cut-Off Insert Cutting Width Lead Angle Grade A2 or A6 Grade 6 CUTTING EDGE GEOMETRY OSITIVE ositive ( Style) for ositive Cutting Action (Stock standard) Aloris Style insert is ideal for Series stainless steel, hightemperature alloys, cast iron, chrome and nickel based alloys. GTN 4* GT L/R 4* ick the grade to fit your application. GTN 4.8* GT L/R 4.8* GTN * GT L/R * GTN 6* GT L/R 6* GTN 8* A strong steel cutting grade ideal for cut-off and grooving applications, coated with Titanium Nitride (gold) for additional wear properties. A2 Our best fine-grain uncoated grade for cast iron, nonferrous metals and high-temp alloys. A6 A strong steel cutting grade, uncoated, for low to medium speed operations. GT L/R 8*. 4 GTN 9*. GT L/R 9*. 4 Specify left or right hand. Call for price over quantity. Inserts are priced individually, however, they must be purchased in packages of. For blades see page 46. ALORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY AVENUE.O. BOX 29 CLIFTON, NJ -29 TEL : FAX: TOLL FREE: aloris@aloris.com WEBSITE: The originator of quick change tooling age 4

57 FAX ORDER FORM FOR Fax: ITEMS MARKED WITH AN *(ASTERISK) We make it easy! Call, fax or mail... Use this form as a handy worksheet and then call us at or toll free at (between 8am and 4: pm EST) with your credit card information (we accept all major credit cards: American Express, MasterCard, VISA and Discover). OR... Complete the order form and fax it to us at (24 hours a day). OR... Complete the order form and mail it to us at Aloris Tool Technology,.O. Box 29, Clifton, NJ -29. For fax or mail orders, please check one: Check or Money Order Enclosed lease ship C.O.D. urchase Order No. Contact Name Title Telephone Number ( ) Bill To: (lease print) Company Name Address City State Zip Ship To: (if different from information above) Company Name Address City State Zip Contact Name urchase Order No. (if necessary) Shipping Instructions DESCRITION RICE EACH QUANTITY TOTAL RICE NOTE: Tax and freight charges will be automatically added to your order. SUBTOTAL TAX FREIGHT TOTAL a y z r Conditions, terms, and prices are subject to change without notice. FAX ORDER TO: age

58 OLICY AND ROCEDURES. MINIMUM ORDERS: All orders will be a minimum of $. net. Any orders less than minimum will be charged at the $. minimum rate. 2. TERMS: % days NET days. Discounts are to be taken as per our terms and any extended discounts will be considered as partial payments in accordance with New Jersey UCC Code Section -2. ast due accounts, over 4 days, will be charged % interest per month and all orders will be placed on CREDIT HOLD and not reissued into production until the account is up to date. Drop Ship Fee % effective January st, 2. This Charge will be added directly to the Invoice. This will not affect shipments made to the Distributors warehouse but solely to orders shipped to the end user.. DELIVERY: All merchandise will be shipped FOB, Aloris Factory, Clifton, N.J.,. We ship US, unless otherwise specified. All merchandise will be shipped in partial shipments, unless notified to the contrary. The majority of orders will be shipped within 48 hours. 4. CLAIMS/SHORTAGES/SHORT SHIMENTS: Claims, shortages, or short shipments must be reported within days after receipt of merchandise. ackaging must be intact and all claims must be reported through delivering carrier. ackaging must be retained for damaged goods inspection. lease always refer to our order number.. RETURNS/RESTOCKING CHARGES: All returns must be authorized and accompanied by an RGA number issued by Aloris and shipped prepaid. We will accept returns within a day period as long as items have not been used. If the error was our responsibility, there will be NO restocking charge. All other returns will be subject to a restocking charge of %. If the goods require refurbishing, an additional charge will be levied. Aloris reserves the right to inspect and approve all returns. 6. GUARANTEE/SERVICE: The products are guaranteed to be free from defect in material and workmanship. roducts will be repaired or replaced, at our option, at no charge unless items have been: misused, abused, accidentally damaged or normal wear and tear and also where alterations or modifications were or have been made by anyone other than Aloris. Repairs not covered by the foregoing guarantee will be made at net pricing and shall be payable persuant to the foregoing terms.. RICES: rices are guaranteed at time of order into production. rices are subject to change without notice. This Catalog supercedes any pricing, policies and procedures from any previous catalog. 8. REAIRS/SECIALS: Repairs and parts are quoted as soon as possible. Aloris Tool will manufacture these products. All special tooling products are on a quotation basis and are non-returnable and non-cancellable once order is received. 9. RELACEMENT ARTS: All items marked with an *(asterisk) after the order number, specials, and repairs are available directly from the manufacturer, and may be purchased at list price with any major credit card, or COD. Conditions, terms, and prices are subject to change without notice. Any typographical or other error in this catalog is subject to correction. ALORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY AVENUE.O. BOX 29 CLIFTON, NJ -29 TEL : FAX: TOLL FREE: aloris@aloris.com WEBSITE: The originator of quick change tooling age 6

59

60 ALORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY AVENUE.O. BOX 29 CLIFTON, NJ -29 U.S.A. TEL: FAX: TOLL FREE: Website: Distributed by: