RoR Step-by-Step Review * Speed Racer Mach V 1-25 Scale Polar Lights Model Kit #POL804 Review

Size: px
Start display at page:

Download "RoR Step-by-Step Review * Speed Racer Mach V 1-25 Scale Polar Lights Model Kit #POL804 Review"

Transcription

1 RoR Step-by-Step Review * Speed Racer Mach V 1-25 Scale Polar Lights Model Kit #POL804 Review Speed Racer was Japanese anime series that found success in the USA as a TV cartoon series in It originated from a 1958 book and subsequent comic series it progressed into the TV cartoon and then was brought back into the spot light when it was turned into a movie in The adventures of the main character Gō Mifune (aka Speed Racer) and his mechanic Sparky were a clever adaption of the swagger of Elvis Presley and the gadgetry of James Bond. This made it especially popular with young boys and girls. Using his wits and driving skill he always wins one for the good guys. For the Modeler: This is the Speed Racer Mach V 1:25 Scale Polar Lights Model Kit # POL804. Polar Lights offered this kit at first as a snap together kit and now they have released a glue together kit with a detailed engine. It is a skill level 2 kit of 70+ pieces molded in white, chrome, clear, black vinyl tires, black screws and waterslide decals. The kit features Super-detailing and includes optional saw blades, jacks and an aqua canopy. The dimensions are; 7 ¼ L X 3 ¼ W X 1 ½ H. This kit has a few options that will change the dimensions such as the saws, 8 ¼ L X 2 ¼ W X 1 ½ H, and with the extended ion jacks, 7 ¼ L X 2 ¼ W X 3 H.

2 Figs. 0a & 0b This is the kit s contents and box art. Figure 1201 There was some flash on a few of the parts and some mold lines. Unless stated differently Testors Model Cement in the tube and Testors Enamel paint in the bottle was used for the construction of this model kit. Figure 1202 The tie rod, left wheel upright, right wheel upright and front suspension top were painted Testors Gloss Black. The chassis is spray painted Testors Gloss White. The left and right wheel uprights are then installed into the chassis. The tie rod is snapped NOT GLUED- to both the left and right wheel uprights.

3 Figure 1203 Here the front suspension top was left off so the tie rod, left and right wheel uprights can be seen in place. Figure 1204 & 5 Each tire assembly has its own parts numbers so it is a good idea to build one tire assembly at a time as they are needed. Here the front driver side tire is displayed prior to assembly. The brake caliper on the disc brake (71) is painted Testors Gloss Red to add detail. The outer wheel is snapped to the inner wheel trapping the tire between them. The wheel knock off is glued to the outer wheel. Figure 1206 The front suspension top is snapped into place then both front tires are assembled and installed onto both wheel uprights.

4 Figure 1207 The rear axle is painted Testors Gloss Black before it gets snapped onto the chassis. The rear tires are assembled the same way as the front tires. Figure 1208 The rear tires are assembled one at a time and installed onto the rear axle.

5 Figure 1209 and Figure 1210 The right headlight and left headlight are installed onto the chassis. The left and right headlight covers cannot be installed until the upper body is attached to the chassis. Figure 1211 and Figure 1212 There is an option to have the saws on the front of the car. The left and right blade arms are painted Testors Steel. A part of the saw blades is painted Tamiya Metallic Grey. The left and right blade arms are attached to the chassis and then the saw blades are snapped onto the blade arms. Figure 1213 A closer view of the saw blades and the blade arms.

6 Figure 1214 The interior is painted Testors Gloss Red and the homing robot box portion is painted Testors Flat Black. The right door panel, left door panel, dashboard, and instrument panel are painted Testors Gloss Red. The steering column and the steering wheel are painted Testors Gloss Red and Testors Silver. The steering shaft is painted Tamiya Acrylic Metallic Grey. The homing robot is painted Testors Silver and the pedals are painted Testors Flat Black. Figure 1215 The pedals are glued to the back of the instrument panel and the steering column is glued to the front of the instrument panel. The instrument panel is then glued to the interior. The steering shaft is inserted through the interior wall into the instrument panel through the steering column until it is about a quarter of an inch sticking out. The steering wheel is glued to the steering shaft s end and once the glue is dried push down on the steering wheel until it touches the steering column. The left and right door panels are snapped to the interior and the instrument panel. The dashboard is attached to the instrument panel and the interior. The homing robot is snapped into the homing robot box on the interior.

7 Figure 1216 the seats are painted Testors Gloss Red and the seat belts are painted Testors Semi Gloss Black with Testors Silver detail. The seat belts are then snapped into the seats. The handbrake and stick shift are snapped into place on the interior. The rearview mirror is attached to the dashboard. The seat assemblies are glued to the interior. Figure 1217 The rear wheel well panel is painted Testors Gloss Black. The seat headrest is painted Testors Gloss Red. The firewall is painted Testors Gloss Red (interior side) and Testors Gloss Black (engine bay side). The right engine part, left engine part, right muffler, and left muffler are painted Testors Aluminum. The inspection panel is painted Testors Semi Gloss Black. The turbine is painted Model Master Chrome Silver. The oxygen tank is painted Model Master Acrylic Gloss Green. The prop rod is painted Tamiya Acrylic Metallic Grey.

8 Figure 1218 The right and left engine parts are snapped onto the rear wheel well panel. The turbine is snapped onto the rear wheel well panel in between both engine parts. The oxygen tank is attached to the rear wheel well panel in between the left engine part and the turbine. The left and right mufflers are snapped onto the rear wheel well panel behind the engine parts and then turbine. The inspection panel is attached to the rear wheel well panel between the mufflers. The seat headrest is attached to the firewall and then the firewall is snapped onto the rear wheel well panel. The prop rod is attached to the left fender.

9 Figure 1219 Here the rear wheel well panel is on the chassis. DO NOT attach it to the chassis yet because it is easier in the final assembly to put the rear wheel well panel into the body and then install the chassis. Figure 1220 Now it is time to work on the car body. The right and left fins are attached to the body. The body, periscope, engine cover panel, and the cover panel for the homing robot (in place on body for figure 1220) are spray painted Testors Gloss White

10 Figure 1221 Decal 1 is applied to the hood and then Decal 2 is applied to both door panels. Decal 3 and Decal 4 are applied to the rear quarter panel. Figure 1222 The periscope is installed into the engine cover panel and the engine bay side of the engine cover panel is painted Testors Gloss Black. The engine cover panel hinge is painted Testors Gloss Black and then it is glued to the engine cover panel. *** Hard lesson learned install the engine cover panel into body first then glue the hinge on even though the instructions say to glue hinge on first then install engine cover onto body.*** Figure 1224 & 1230a Place the engine cover into place and then glue engine cover panel hinge onto the engine cover panel. Install rear wheel well panel assembly into body assembly. The cover panel for the homing robot is installed into the car body assembly. The chassis assembly is snapped into the car body assembly and then the headlight covers are installed. The side mirror is attached to the passenger side of the car body assembly. The windshield is glued to the car body assembly with Testors Clear Parts Cement & Window Maker. An optional Bulletproof/Underwater canopy is also available. There are two screws that get installed into chassis to secure the car body to the chassis.

11 Figure 1225 The rear view of the Speed Racer Car. The mufflers had Testors Flat Black added to create a more realistic look. Figure 1226 In step 2 of the instructions it discusses the ion jack stands. The ion jack stands are painted Testors Steel and Testors Gloss White. The bases had a mold line that is marked in green sharpie that, with a little sanding, will smooth out. Figure 1228 Here the Speed Racer car has the extended ion jack stands installed to demonstrate what they look like on the Speed Racer car. A front view (right) of the Speed Racer car with the extended ion jacks installed.

12 Figure 1230 The other option is just the base which gets painted Testors Gloss White and just snaps into place on the chassis. Figure 1233 A view of the engine compartment after everything is installed. Here the engine cover panel is held open with the prop rod to show how the kit can be displayed as well.

13 Figure 1234 Mach 5 is done so now it s time to race on those awesome race tracks they have in the movie. Figure 1235 Conclusion: This model kit has some really good detail, however I found the instructions did not do the kit justice. The instructions are set up for a snap together version with an exploded view of the parts at the bottom of the page. Following the instructions will get a white car with chrome and clear parts but no detailed parts. The front cover of the instructions list paint colors but when a person reads the instructions none of the parts have a paint color next to them. Researching the car can get the interior painted but the engine area is a different story. The builder would have to watch countless cartoons of the Speed Racer show just to get an idea of how to paint the engine area accurately. I would build this kit again however just to have the different versions of the car in my model collection.

Right On Replicas, LLC Step-by-Step Review * 1959 Chevy Impala Hard Top 2 n 1 1:25 Scale Revell Model Kit # Review

Right On Replicas, LLC Step-by-Step Review * 1959 Chevy Impala Hard Top 2 n 1 1:25 Scale Revell Model Kit # Review Right On Replicas, LLC Step-by-Step Review 20140915* 1959 Chevy Impala Hard Top 2 n 1 1:25 Scale Revell Model Kit #85-4315 Review Review and Photos by James Yeager 1959 Chevy was the second year of production

More information

RoR Step-by-Step Review * Popper Chopper Mini Bike 1:8 Scale Monogram Kit #7534 Review

RoR Step-by-Step Review * Popper Chopper Mini Bike 1:8 Scale Monogram Kit #7534 Review RoR Step-by-Step Review 20130604* Popper Chopper Mini Bike 1:8 Scale Monogram Kit #7534 Review This kit was one of the more famous Tom Daniel releases back in the 70 s Tom Daniel has designed many awesome

More information

Right On Replicas, LLC Step-by-Step Review * Willys MB Jeep 1:35 Scale Tamiya Model Kit #35219 Review

Right On Replicas, LLC Step-by-Step Review * Willys MB Jeep 1:35 Scale Tamiya Model Kit #35219 Review Right On Replicas, LLC Step-by-Step Review 20150211* Willys MB Jeep 1:35 Scale Tamiya Model Kit #35219 Review The Jeep was designed in a crash program in 1941 to be used throughout World War II. The iconic

More information

Right On Replicas, LLC Step-by-Step Review * Panzer IV Tank 1:32 Scale Monogram Model Kit # Review

Right On Replicas, LLC Step-by-Step Review * Panzer IV Tank 1:32 Scale Monogram Model Kit # Review Right On Replicas, LLC Step-by-Step Review 20150108* Panzer IV Tank 1:32 Scale Monogram Model Kit #85-7861 Review The Panzer tank was used throughout World War II and had several modifications during that

More information

RoR Step-by-Step Review * Vandal with Minibike 1:24 Scale Monogram Kit Review

RoR Step-by-Step Review * Vandal with Minibike 1:24 Scale Monogram Kit Review RoR Step-by-Step Review 20130220* Vandal with Minibike 1:24 Scale Monogram 85-4926 Kit Review In the 1970s, custom vans were all the rage. Tom Daniel couldn t resist the opportunity to exercise his design

More information

RoR Step-by-Step Review * Boot Hill Express 1:24 Scale Monogram Kit # Review

RoR Step-by-Step Review * Boot Hill Express 1:24 Scale Monogram Kit # Review RoR Step-by-Step Review 20130506* Boot Hill Express 1:24 Scale Monogram Kit #85-4999 Review This is what happens when you combine a dragster with an exceptionally ornate hearse. The beautiful wood lines

More information

Background: For the Modeler:

Background: For the Modeler: Right On Replicas, LLC Step-by-Step Review 20141020* Space Shuttle with Fuel Tank and Boosters 1:72 Scale Monogram Model Kit #85-5089 Review (Part 1 of 2) Background: The United States Space Transportation

More information

RoR Step-by-Step Review * Gee Bee Air Racer 1:32 Scale Lindberg Model Kit #70561 Review

RoR Step-by-Step Review * Gee Bee Air Racer 1:32 Scale Lindberg Model Kit #70561 Review RoR Step-by-Step Review 20131030* Gee Bee Air Racer 1:32 Scale Lindberg Model Kit #70561 Review The Gee Bees, perhaps the best-known of all Golden Age American racing aircraft, were produced by the five

More information

Ziroli D-17 Beech Staggerwing

Ziroli D-17 Beech Staggerwing Ziroli D-17 Beech Staggerwing Parts List Vacuform Parts: Miscellanous Pieces 1 Four Side Panels 1 3/16" Tube, 2" Long 2 Lower Dash - Back Dash 2 Felt, 12x24 3 Dash 3 Cordury 12x24 4 Dash Hood 4 Aluminum

More information

Continue gluing the remaining top parts ensuring the angled piece is glued well. Set aside and let dry. See photo below

Continue gluing the remaining top parts ensuring the angled piece is glued well. Set aside and let dry. See photo below Radiator rev 1.1 The SE5a s radiator is one of the most recognized radiators in WW1. It is one of the components that defines the SE5a. The original SE5a has seen multiple radiator designs used during

More information

1104. Clean up the door striker plates with a hand grinder using a wire brush and WD-40.

1104. Clean up the door striker plates with a hand grinder using a wire brush and WD-40. Chapter 31 - Misc. Putting VW Back Together (Video Clip 31) 1104. Clean up the door striker plates with a hand grinder using a wire brush and WD-40. 1105. Install both door striker plates on the VW body

More information

Page 1 of 5. Instructions for assembling your PacknMove boxes

Page 1 of 5. Instructions for assembling your PacknMove boxes Instructions for assembling your PacknMove boxes The majority of our boxes are very easy to construct, but a couple might look like cardboard origami at first. If you are having any problems constructing

More information

Bates 1/8 scale B-26. Parts List. Instructions

Bates 1/8 scale B-26. Parts List. Instructions Bates 1/8 scale B-26 Vacuform Pieces Swivel Ball 1 Cockpit Floor 1 Ball 2 Cockpit Back Wall 2 Two Flanges 3 Dash 3 Seven 0-64 x 1/4 Bolts 4 Dash Hood 4 Seven 0-64 Nuts 5 Center Console 6 Pilot Seat Fire

More information

Hardee s Restaurant kit in HO scale

Hardee s Restaurant kit in HO scale Hardee s Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic and laser cut white acrylic, clear acrylic window glazing,

More information

NOT ALLOW YOUNG CHILDREN TO PLAY WITH THIS TOY UNSUPERVISED.

NOT ALLOW YOUNG CHILDREN TO PLAY WITH THIS TOY UNSUPERVISED. SNAPPING ALLIGATOR This wooden toy is great for parents or grandparents to play with young children. Hold by the tail and move the alligator slowly along with the front wheel slightly off the ground and

More information

RoR Step-by-Step Review * Dodge Street Charger 1:16 Scale MPC Kit Review

RoR Step-by-Step Review * Dodge Street Charger 1:16 Scale MPC Kit Review RoR Step-by-Step Review 20130201* Dodge Street Charger 1:16 Scale MPC768-06 Kit Review This kit was one I remember building as a kid and I m still lucky enough to have them today. In fact, I built four

More information

FENDER FLARE INSTALLATION

FENDER FLARE INSTALLATION : 2011-2014 Ram 2500/3500 Fleetside 76.3 inch and 98.3 inch Bed. Tools Required 1. #2 Phillips Driver 2. Socket Wrench 3. 8mm Socket 4. 1/2 Wrench 5. Utility Knife 6. Awl or Similar Pointed Tool PRIOR

More information

Additional Parts List:

Additional Parts List: THE TIME MACHINE Additional Parts List: In addition to the cast resin parts enclosed in this kit, there should also be a plastic bag containing the following items needed to complete your time machine

More information

FENDER FLARE INSTALLATION

FENDER FLARE INSTALLATION : 2009 - UP Ram 1500 Fleetside. (Exclude R/T Models) Tools Required 1. #2 Phillips Driver 2. Socket Wrench 3. 8mm Socket 4. 1/2 Wrench 5. Utility Knife PRIOR TO INSTALLATION Hardware Kit Included 5/16

More information

Vehicle Dynamics and Design Creating a Chevy Malibu car in SolidWorks STEP 2: Go to top of page to Tools, then scroll down to Options.

Vehicle Dynamics and Design Creating a Chevy Malibu car in SolidWorks STEP 2: Go to top of page to Tools, then scroll down to Options. STEP 1: Open up SolidWorks 2008. (a) Choose a new part to open. (b) Click OK. Vehicle Dynamics and Design Creating a Chevy Malibu car in SolidWorks 2008 STEP 2: Go to top of page to Tools, then scroll

More information

TUBULAR FRONT END KIT INSTALLATION INSTRUCTIONS MUSTANG

TUBULAR FRONT END KIT INSTALLATION INSTRUCTIONS MUSTANG TUBULAR FRONT END KIT INSTALLATION INSTRUCTIONS 1979 2004 MUSTANG Pre-Installation Notes & Recommendations: Before disassembly, remove anything within the engine bay that can be removed; this will give

More information

Hasegawa 1/48 scale Nakajima B5N2 "Kate" by Dick Smith

Hasegawa 1/48 scale Nakajima B5N2 Kate by Dick Smith Hasegawa 1/48 scale Nakajima B5N2 "Kate" by Dick Smith The release of last summer's motion picture "Pearl Harbor," caused a flood of interest in the modeling world in the Japanese aircraft that took part

More information

FENDER FLARE INSTALLATION

FENDER FLARE INSTALLATION TG-FF8T4178: Fit 2014-UP Toyota Tundra PRIOR TO INSTALLATION IMPORTANT Tyger only approves the installation according to our instructions with the hardware provided. WARNING Failure to complete the installation

More information

Article (May, 2005) Scratch building a Berliner Helicopter in 1/72 scale

Article (May, 2005) Scratch building a Berliner Helicopter in 1/72 scale Article (May, 2005) Scratch building a Berliner Helicopter in 1/72 scale This project was my longest running build, and took me approximately six months to complete. I embarked upon this path over a year

More information

RoR Step-by-Step Review * Caudron Air Racer 1:32 Scale W ms Bros. Kit # Review

RoR Step-by-Step Review * Caudron Air Racer 1:32 Scale W ms Bros. Kit # Review RoR Step-by-Step Review 20130531* Caudron Air Racer 1:32 Scale W ms Bros. Kit #32-460 Review The French Caudron firm was among the pioneer manufactures, dating back to circa 1910. During World War One,

More information

Design Brief: Mousetrap Racer

Design Brief: Mousetrap Racer Design Brief: Mousetrap Racer Materials Coping saw Square Pin vise Wood chassis Screw eyes (2 large, 2 small) Sanding block 80 grit sandpaper 5/16 Drill bit Kit of Race Car Parts Hand Tools Sketch Paper

More information

15 - Interior. Interior. February GGG Page 15-1

15 - Interior. Interior. February GGG Page 15-1 Interior February 2003 15-GGG Page 15-1 15 - Interior This Page Intentionally Left Blank Page 15-2 15-GGG February 2003 Contents 15.0 - Chapter Preface...15-4 15.0.1 - Parts List...15-4 15.0.2 - Tools

More information

STYLE BAR & TONNEAU COVER INSTALLATION

STYLE BAR & TONNEAU COVER INSTALLATION STYLE BAR & TONNEAU COVER INSTALLATION INSTALLATION MANUAL: 2005 to '09 Mustang P/N: 10-8002-C12071B Saleen Performance, Inc. 1225 East Maple Rd., MI 48083 800-888-8945 www.saleen.com 1 IF YOU ARE NOT

More information

BOLT ON LONG TRAVEL FOR E-Z-GO

BOLT ON LONG TRAVEL FOR E-Z-GO INSTALLATION INSTRUCTIONS BOLT ON LONG TRAVEL FOR E-Z-GO 1994 2000 Model E-7-04 E-7-06 TABLE OF CONTENTS Progressive Supension Kit... 2 Kit Contents...3-4 Disassembly...5-10 Frame Assembly...11-14 Frame

More information

MM Strut Tower Brace, Cobra (MMSTB-7)

MM Strut Tower Brace, Cobra (MMSTB-7) The MM strut Tower Brace attaches to each strut tower and to the firewall. 3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com MM

More information

FENDER FLARE INSTALLATION

FENDER FLARE INSTALLATION Part#: TG-FF8G4158 FOR 2007-2013 GMC Sierra 1500 Pickup Truck (Exclude 69.3inch Short Bed Models) FENDER FLARE INSTALLATION Hardware Kit Included IMPORTANT TYGER only approves the installation according

More information

I m going to say that Rob coerced me to take part in the club Shell 4000 theme build. He promised me an engine free Tamiya kit. This is what I got

I m going to say that Rob coerced me to take part in the club Shell 4000 theme build. He promised me an engine free Tamiya kit. This is what I got I m going to say that Rob coerced me to take part in the club Shell 4000 theme build. He promised me an engine free Tamiya kit. This is what I got instead. Looks like it s an older Fujimi kit and it does

More information

FENDER FLARE INSTALLATION

FENDER FLARE INSTALLATION Customer Support TM FENDER FLARE INSTALLATION TG-FF8C4108 IMPORTANT TYGER only approves the installation according to our instructions with the hardware provided. WARNING Failure to complete the installation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS NOTE: Bolts should remain hand tight until all bolts are installed. STEP 1 Installing the door base (both sides). 1. Locate the outer, roll cage, mounting bolt (passenger side is shown in the illustration).

More information

Early Mustang & Cougar cowl repair

Early Mustang & Cougar cowl repair Early Mustang & Cougar cowl repair Okay, I m no expert but Bob suggested that I describe my experiences in replacing a rusty cowl in my 68 Mustang fastback I thought the cowl was good when I bought this

More information

This time I am building a 56 Ford 4 Gear Door Slammer for the upcoming race at Sam's.

This time I am building a 56 Ford 4 Gear Door Slammer for the upcoming race at Sam's. PART I I have been meaning for a while, to show you guys what I go through, and my thought process when I decide to do a tear down / scratch build project. Some may remember the Rat Rod Willy's I did as

More information

CVS Pharmacy kit in HO scale

CVS Pharmacy kit in HO scale CVS Pharmacy kit in HO scale Parking lot base and cars not included This kit includes all building parts and wall-mounted signs milled in white styrene plastic, clear window glazing and pre-cut Plastruct

More information

RoR Step-by-Step Review * U2-C Spyplane 1:48 Scale Testors Model Kit #516 Review

RoR Step-by-Step Review * U2-C Spyplane 1:48 Scale Testors Model Kit #516 Review RoR Step-by-Step Review 20131021* U2-C Spyplane 1:48 Scale Testors Model Kit #516 Review The Lockheed U-2 nicknamed "Dragon Lady" was designed in 1954 by Kelly Johnson in a division called the Skunk Works.

More information

LAPORTE COUNTY 4-H MODEL PROJECT

LAPORTE COUNTY 4-H MODEL PROJECT LAPORTE COUNTY 4-H MODEL PROJECT I. PURPOSE This project is designed to provide members with an opportunity to be creative and to familiarize them with the techniques of assembly, construction and painting.

More information

20011, F100 - F150 - F250 - F350 P.U. & BRONCO Tools Needed for Installation:

20011, F100 - F150 - F250 - F350 P.U. & BRONCO Tools Needed for Installation: Rev-4 05-24-12 CUT OUT FLARES INSTALLATION INSTRUCTIONS FOR 20011, 20012 F100 - F150 - F250 - F350 P.U. & BRONCO Tools Needed for Installation: Step 1: Painting (A) 3/8 Drill (B) 3/16 Drill Bit (C) 5/16

More information

GMC Cut-Out Fender Flares Set of 4

GMC Cut-Out Fender Flares Set of 4 GMC Cut-Out Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to

More information

Interior CHAPTER 21. Phantom Roadster Instruction Manual 273

Interior CHAPTER 21. Phantom Roadster Instruction Manual 273 CHAPTER 21 Interior When you get to this chapter you are now starting on the finish that will make your car one that will be complete your hard work. This chapter will cover the installation of the door

More information

Obtained from Omarshauntedtrail.com

Obtained from Omarshauntedtrail.com DaveintheGrave's Halloween Props Animated Crawling Skeleton Build a life-size skeleton torso that realistically crawls across the lawn one arm at a time. 1. Motor Base and Linkage Assembly BASE - I used

More information

Swift assembly guide

Swift assembly guide Swift assembly guide Download the assembly guide at www.scihighmodels.com/swift.pdf Sample kit shown with aluminium bells (available with the Deluxe kit) Shown here without main tanks Version 10/12/2010

More information

GMC Extend-A-Fender Fender Flares Set of 4

GMC Extend-A-Fender Fender Flares Set of 4 GMC Extend-A-Fender Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

Instructions: GSC 60 Flatcar Kit with or without bulkheads Tangent Part Number: and /2016

Instructions: GSC 60 Flatcar Kit with or without bulkheads Tangent Part Number: and /2016 Instructions: GSC 60 Flatcar Kit with or without bulkheads Tangent Part Number: 11000-01 and 11000-02 5/2016 Thank you for purchasing the Tangent Scale Models GSC 60 Flatcar Kit! A few quick notes before

More information

Toyota OE Style Fender Flares Set of 4

Toyota OE Style Fender Flares Set of 4 Toyota OE Style Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

4-H Model Building. Monroe County. Grades 3-12

4-H Model Building. Monroe County. Grades 3-12 4-H Model Building Monroe County Grades 3-12 PURPOSE Positive development of our young people through the stimulation of their personal interest and natural skills through the assembly, techniques of construction,

More information

RoR Step-by-Step Review Consolidated B-24J Liberator 1:48 Monogram # Review Click Here to Buy This Kit

RoR Step-by-Step Review Consolidated B-24J Liberator 1:48 Monogram # Review Click Here to Buy This Kit RoR Step-by-Step Review 201207011 Consolidated B-24J Liberator 1:48 Monogram #85-5629 Review Click Here to Buy This Kit The Consolidated B-24 Liberator was an American heavy bomber, designed by Consolidated

More information

Cool, Quiet & Comfortable

Cool, Quiet & Comfortable installation in a 32 Ford Coupe Cool, Quiet & Comfortable By Mr. Al Knack, Cotter, Arkansas 1. These are the products and suggested tools needed to install Hushmat in any type vehicle. A tape measure,

More information

Chevrolet Street Flares Fender Flares Set of 4

Chevrolet Street Flares Fender Flares Set of 4 Chevrolet Street Flares Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING:

More information

Heat up PE parts with lighter before use, brass will soften and become easy to bend and work with

Heat up PE parts with lighter before use, brass will soften and become easy to bend and work with Diamond T 968 was a cargo truck based on a 4 ton 6x6 chassis, powered with a Hercules RXC six-cylinder gasoline engine and equipped with a five-speed overdrive transmission and a direct and under drive

More information

INSTALLATION INSTRUCTIONS KK-K9-C12-K CHEVY IMPALA

INSTALLATION INSTRUCTIONS KK-K9-C12-K CHEVY IMPALA INSTALLATION INSTRUCTIONS KK-K9-C12-K 2000-2005 CHEVY IMPALA READ ALL INSTRUCTIONS PRIOR TO INSTALLATION TOOLS REQUIRED: Power Drill Drill bits1/4 and 5/32 7/l6 wrench and socket 15,18 and\or 19mm socket

More information

Jeep. Flat Style Fender Flares Front Pair. Included in Hardware Kit:

Jeep. Flat Style Fender Flares Front Pair. Included in Hardware Kit: Jeep Flat Style Fender Flares Front Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

Included in Hardware Kit. 09-Up Ford F150. Set Part # Rev STEP 1 - PRIOR TO INSTALLATION TOOLS FOR EASY INSTALLATION:

Included in Hardware Kit. 09-Up Ford F150. Set Part # Rev STEP 1 - PRIOR TO INSTALLATION TOOLS FOR EASY INSTALLATION: 09-Up Ford F150 Set Part #20927-02 Rev-3 5-18-09 A) B) C) D) E) F) G) STEP 1 - PRIOR TO INSTALLATION Bushwacker only approves installing the fl ares according to these written instructions with the hardware

More information

TOYOTA TACOMA LED BED LIGHTS Preparation

TOYOTA TACOMA LED BED LIGHTS Preparation Preparation Part Number: PT948-35160 Kit Contents Item # Quantity Reqd. Description 1 1 Hardware Kit 2 1 Driver Side LED assembly 3 1 Passenger Side LED assembly 4 1 Main Wire Harness Hardware Bag Contents

More information

Congratulations on your purchase of our new reproduced 1969 Mercury Cougar Stainless Steel Rocker Moldings

Congratulations on your purchase of our new reproduced 1969 Mercury Cougar Stainless Steel Rocker Moldings Congratulations on your purchase of our new reproduced 1969 Mercury Cougar Stainless Steel Rocker Moldings Before starting installation, we recommend that you read these instructions a couple of times

More information

JK Rear Inner Fenders

JK Rear Inner Fenders INSTALLATION INSTRUCTIONS INST-17-05-080_A JK Rear Inner Fenders IMPORTANT: Thank you for purchasing this Poison Spyder product. Please read through this entire document before proceeding with installation.

More information

USE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT:

USE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT: 1963-1972 C10 Chevy Truck Custom IFS Installation Instructions Tech line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE THE PARTS LIST BELOW

More information

Mold #328. Roller Bot. Nail Bot. You will need the following. pieces from mold #328 for this robot. mold #328 for this robot.

Mold #328. Roller Bot. Nail Bot. You will need the following. pieces from mold #328 for this robot. mold #328 for this robot. Nail Bot mold #328 for this Mold #328 Roller Bot mold #328 for this Stand the piece up and glue the tanks onto the back of the piece. Be sure to center the tanks. Lay these two pieces down on a flat surface

More information

RoR Step-by-Step Review * F9-F Grumman Panther 1:48 Scale AMT Model Kit #813 Review

RoR Step-by-Step Review * F9-F Grumman Panther 1:48 Scale AMT Model Kit #813 Review RoR Step-by-Step Review 20150122* F9-F Grumman Panther 1:48 Scale AMT Model Kit #813 Review Grumman s first construction of a Navy jet fighter was a big success with two versions powered by different engines.

More information

SCHWERE PLATTFORMWAGON TYPE SSY 60TON

SCHWERE PLATTFORMWAGON TYPE SSY 60TON TWS 5094 SCHWERE PLATTFORMWAGON TYPE SSY 60TON Congratulations on purchasing one of the finer aftermarket resin kits sets available. The photo below is of the completed kit. The Panther tank is not included

More information

Included in Hardware Kit: Ford Extend-A-Fender Ford OE Style Fender Flares Set of 4 Set Part # Set Part # Rev-1 01/18/2017

Included in Hardware Kit: Ford Extend-A-Fender Ford OE Style Fender Flares Set of 4 Set Part # Set Part # Rev-1 01/18/2017 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions

More information

Chevrolet Cut-Out Fender Flares Set of 4

Chevrolet Cut-Out Fender Flares Set of 4 Chevrolet Cut-Out Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

RAM Pocket Style Fender Flares Set of 4

RAM Pocket Style Fender Flares Set of 4 RAM Pocket Style Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

Included in Hardware Kit: Jeep Pocket Style Fender Flare Set of 4. Set Part # Rev-0 3/15/2013 TOOLS FOR EASY INSTALLATION:

Included in Hardware Kit: Jeep Pocket Style Fender Flare Set of 4. Set Part # Rev-0 3/15/2013 TOOLS FOR EASY INSTALLATION: STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions

More information

Shell Gas Station & Convenience Store kit in HO scale

Shell Gas Station & Convenience Store kit in HO scale Shell Gas Station & Convenience Store kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing,

More information

Peter Krause ABN

Peter Krause ABN Peter Krause ABN 25 736 637 163 T/as O-Aust Kits PO Box 743 ALBANY CREEK QLD 4035 AUSTRALIA Phone +61 (0)7 3298 6283 (7.00pm to 9.30pm ONLY) Facsimile +61 (0)7 3298 6287 (24 hours) Mobile 0419 680 584

More information

Fixing up the Italeri 1/35th Scale M6 Anti Tank Dodge

Fixing up the Italeri 1/35th Scale M6 Anti Tank Dodge IPMS Seattle Chapter Newsletter Page 1 Fixing up the Italeri 1/35th Scale M6 Anti Tank Dodge by George Stray I want to start with a couple things about the kit and why I chose it. The old Italeri kits

More information

Jeep. Cut-Out Fender Flares Set of 4. Included in Hardware Kit: Set Part # Rev-8 06/29/16 STEP 1 PRIOR TO INSTALLATION

Jeep. Cut-Out Fender Flares Set of 4. Included in Hardware Kit: Set Part # Rev-8 06/29/16 STEP 1 PRIOR TO INSTALLATION STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions

More information

MM Strut Tower Brace, GT (MMSTB-5.1)

MM Strut Tower Brace, GT (MMSTB-5.1) 3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com MM Strut Tower Brace, 1996-97 GT (MMSTB-5.1) MMSTB-5.1 is for 1996-97 GT s with

More information

EXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description

EXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description EXTRA 330SC 60CC Item No:H G060011 Specifications Wing Span Length Wing Area Flying Weight Gasoline Radio Description Carbon Fibre : 92" (2347mm) 84 1/2 " (2060mm) 1526.8 sq in(98.5sq dm) 16 17lbs(7300

More information

RAM Pocket Style Fender Flares Set of 4

RAM Pocket Style Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions

More information

Fairlane Front Suspension Install Sheet

Fairlane Front Suspension Install Sheet 1966-1967 Fairlane Front Suspension Install Sheet 1-866-925-1101 Read and understand these instructions before starting any work! 1966-1967 Fairlane Front Suspension Installation Instructions Thank you

More information

Cobra X Q Construction Tips Construction: Bel y pan

Cobra X Q Construction Tips Construction: Bel y pan Cobra X Q Construction Tips : The white plastic in this kit is high impact styrene. It can be painted with most types of coatings if light coats are applied this is necessary due to the thickness of the

More information

RAM Pocket Style Fender Flares Set of 4

RAM Pocket Style Fender Flares Set of 4 RAM Pocket Style Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

Corvus Racer CC

Corvus Racer CC Corvus Racer 540 35CC Item No:L-G035008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio mm mm 1200sq in (77.4sqdm) 9.9-12lbs(4.5-5.5kg) 91-1.20(2C) 1.10-1.40(4C) 20-40cc

More information

Chevrolet Cut-Out Fender Flares Front Pair

Chevrolet Cut-Out Fender Flares Front Pair Chevrolet Cut-Out Fender Flares Front Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

How to Assemble the Vacuum Formed Plastic 7/8 Scale Lewis Gun

How to Assemble the Vacuum Formed Plastic 7/8 Scale Lewis Gun How to Assemble the Vacuum Formed Plastic 7/8 Scale Lewis Gun 1. Read ALL the instructions before starting assembly. 2. Begin assembly by thoroughly washing the inside and outside surfaces of the vacuum

More information

Trim down the piece of casting being pointed to with the tip of the pencil in the first picture. It is only the 'inboard casting that needs to be

Trim down the piece of casting being pointed to with the tip of the pencil in the first picture. It is only the 'inboard casting that needs to be 1. File off the moulding pips from the wheel flanges. File the ends of the tube smooth and de-burr. Assemble the wheel sets with a drop of car engine oil on the axles. Glue the wheel sets into place. 2.

More information

FUSELAGE CONSTRUCTION

FUSELAGE CONSTRUCTION FUSELAGE CONSTRUCTION Note: prior to building and gluing on the work surface use protective covering on your building surface. (wax paper or clear wrap) Fit the laser cut Fuselage Front and Fuselage Rear

More information

THIS KIT INCLUDES: 8 M8-1.25X40MM BOLTS WITH WASHERS 8 M8-1.25X30MM BOLTS WITH WASHERS RIGHT AND LEFT HINGE

THIS KIT INCLUDES: 8 M8-1.25X40MM BOLTS WITH WASHERS 8 M8-1.25X30MM BOLTS WITH WASHERS RIGHT AND LEFT HINGE Sal es@lambodoorscanada. com 2407A Kal adarave,ottawa,on K1V 8B9 THIS KIT INCLUDES: 8 M8-1.25X40MM BOLTS WITH WASHERS 8 M8-1.25X30MM BOLTS WITH WASHERS RIGHT AND LEFT HINGE 2 SHOCKS 565 PSI 2 SHOULDER

More information

Right On Replicas, LLC Step-by-Step Review * Star Wars First Order Special Forces TIE Fighter Revell Model Kit # Review

Right On Replicas, LLC Step-by-Step Review * Star Wars First Order Special Forces TIE Fighter Revell Model Kit # Review Right On Replicas, LLC Step-by-Step Review 20160516* Star Wars First Order Special Forces TIE Fighter Revell Model Kit #85-1824 Review In the STAR WARS Universe the Twin Ion Engine (TIE) Fighter is the

More information

Car Construction E-Book

Car Construction E-Book Physics Lecture 15 - Building the Simple But Fast (SBF) Car - Part 2 Introduction - This lecture continues on where Lecture 14 left off- Explain to your Cub partner how Archimedes in about 100 AD first

More information

Chevrolet Street Flares Fender Flares Rear Pair

Chevrolet Street Flares Fender Flares Rear Pair Chevrolet Street Flares Fender Flares Rear Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING:

More information

Ford Pocket Style Fender Flares Set of 4

Ford Pocket Style Fender Flares Set of 4 Ford Pocket Style Fender s Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

Tools and Tips: ( 1 )

Tools and Tips: ( 1 ) Tools and Tips: As you build instructions will show in my many picture manual how to assemble. You can use your own methods as you desire, my results are very good. A smooth, flat work surface is very

More information

CORVETTE CORVETTE REV: Made in USA U.S. PATENT #6,808,223; #6,845,547; #7,140,075; #7,059,655 and other patents pending.

CORVETTE CORVETTE REV: Made in USA U.S. PATENT #6,808,223; #6,845,547; #7,140,075; #7,059,655 and other patents pending. CORVETTE 2005-2006 CORVETTE 2005-2007 REV: 7-2-07 Made in USA U.S. PATENT #6,808,223; #6,845,547; #7,140,075; #7,059,655 and other patents pending. Page 1 of 12 CORVETTE C6 2005-2007 THIS KIT INCLUDES:

More information

Important Note. Tools Required: Welder capable of fully welding 10 GA.135 steel

Important Note. Tools Required: Welder capable of fully welding 10 GA.135 steel INSTALLATION INSTRUCTIONS Frame Reinforcement Kit 11100 (Patent Pending) 1968-72 GM A-Body Coupe/Sedan Read Instructions FULLY before starting Installation Important Note Installation of this kit requires

More information

Ford Max Pocket Style Fender Flares Set of 4

Ford Max Pocket Style Fender Flares Set of 4 Ford Max Pocket Style Fender s Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

IMPROVING AND SCRATCHBUILDING AN F4U CORSAIR COCKPIT BY MIKE ASHEY

IMPROVING AND SCRATCHBUILDING AN F4U CORSAIR COCKPIT BY MIKE ASHEY IMPROVING AND SCRATCHBUILDING AN F4U CORSAIR COCKPIT BY MIKE ASHEY This article presents some basic techniques for improving and scratchbuilding a cockpit. For this project I used Model Technologies photoetch

More information

RAM Pocket Style Fender Flares Set of 2 (Rear)

RAM Pocket Style Fender Flares Set of 2 (Rear) STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions

More information

GMC Cut-Out Fender Flares Set of 4

GMC Cut-Out Fender Flares Set of 4 GMC Cut-Out Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to

More information

Ford Ranger / Bronco II Set Part # Rev B 5-04

Ford Ranger / Bronco II Set Part # Rev B 5-04 Ford Ranger / Bronco II Set Part # 21008 Rev B 5-04 Step 1: Prior to Installation: A) Fit: Verify the fit of the flares to vehicle. (Some filing, sanding, or cutting may be necessary to ensure proper fit).

More information

Installation Guide for Rough Country 1.25 inch Body Lift Kit w/o Shocks (07-15 Wrangler JK 4 Door) Item # J10048 Option B; Manual

Installation Guide for Rough Country 1.25 inch Body Lift Kit w/o Shocks (07-15 Wrangler JK 4 Door) Item # J10048 Option B; Manual Installation Guide for Rough Country 1.25 inch Body Lift Kit w/o Shocks (07-15 Wrangler JK 4 Door) Item # J10048 Option B; Manual Installation Time: 3 Hours Tools Required: Jack (Tall enough to reach body

More information

CLUB-SPORT ROLL BAR: Volkswagen Mk4 Golf

CLUB-SPORT ROLL BAR: Volkswagen Mk4 Golf HPA Motorsports Inc. 604-888-7274 www.hpamotorsport.com CLUB-SPORT ROLL BAR: Volkswagen Mk4 Golf Congratulations on the purchase of your Club-Sport Roll Bar from HPA Motorsports! The engineering elements

More information

USE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT:

USE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT: 1967-1969 Cougar Custom IFS Install Sheet Tech Line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE THE PARTS LIST BELOW TO MAKE SURE YOUR

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Parts Included: 1 Nose Cone 1 Body Tube 3 1/8 Balsa Fins 1 Thrust Ring 1 Motor Tube 1 Motor Hook 1 Motor Sleeve 2 Centering Rings 1 Launch Lug 1 Kevlar Shock Cord (yellow) 1 Elastic

More information

Jeep Cherokee Door XJ Set Part # Revision J

Jeep Cherokee Door XJ Set Part # Revision J Jeep Cherokee 84-96 4 Door XJ Set Part # 10911 Revision J 6-5-06 Step 1: Prior to Installation: A) Fit: Verify the fit of the flares to vehicle. (Some filing, sanding, or cutting may be necessary to ensure

More information

Jeep Cherokee 4-Door XJ Set Part # Rev

Jeep Cherokee 4-Door XJ Set Part # Rev Jeep Cherokee 4-Door XJ Set Part # 10911 Rev-14 04-05-10 Step 1: Prior to Installation: A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided.

More information