GYRMATIC 350/500. Lathes and turntables for circular welds. Straightforward, easy and low-cost automation of your production.
|
|
- Letitia Payne
- 6 years ago
- Views:
Transcription
1 GYRMATIC 350/500 Lathes and turntables for circular welds. Straightforward, easy and low-cost automation of your production.
2 Straightforward, modu ar, ow-cost equipment for automating or mechanizing a wide range of circular welding applications. The GYRMATIC 350 & 500 are modular systems designed to adapt easily and quickly to all conditions for circular welding around a horizontal or vertical axis or in intermediate positions set using a manual tilt device. They are designed for manual or automatic MIG / MAG or TIG welding of circular parts secured to the turntable or between tailstocks. They are currently used to manufacture a wide range of products: gas bottles fire extinguishers compressors pipe flange welds cylinder bodies rims dampers exhaust pipes, etc., GYRMATIC systems provide a straightforward, efficient and low-cost solution for automated welding of all circular parts, guaranteeing: increased productivity high-quality repetitive welds operator comfort.
3 Atiting turntab e for circu ar we ds: straightforward, easy and low-cost automation for small circular parts. GYRMATIC 350 for parts up to 0 kg, with tailstock: - diameter 300 mm, - length 300 mm, without tailstock: refer to load curve. 1 1 Machined turntable Dia. 350 mm to secure the part. Tilt device Manual no-tool tilt device with automatic indexing for 6 positions at 15 intervals. 3 3 Switch Power ON/OFF switch. D E C F A B GYRMATIC 350 assembly with add-ons: A stand B torch support with PROMIG torch collar or automatic torch collar C pneumatic torch retraction facility D remote control unit E rotation speed display F back gas. Control unit Built into case (can be operated from remote unit)
4 The modu ar athe and turntab e so ution to increase productivity for your circular applications. GYRMATIC 500 for workpieces up to 100 kg. Workpiece dimensions for standard equipment: with tailstock: - diameter 500 mm, - length 800 mm, without tailstock: see load curve. 1 Torch support with manual retraction system for easier loading and unloading of workpiece. Automatic torch retraction system can be fitted as option. 1 6 Fine adjustment system for accurate positioning of the torch in the joint. 6 7 Add-ons for manual tailstock (80 mm travel) or pneumatic tailstock (100 mm travel) with rotating point. 7 3 Operating comfort provided by electrical controls with automatic cycle built into support frame. Support frame with cradle tilting to 7 fixed positions at 15 intervals for welding under optimum conditions. 5 5 Workpiece secured on machined turntable, diameter 90 mm. 8 Manual welding with optional footpedal for controlling the turntable (plug-in connector for quick connection). 3 8 Linear positioning with handle for locking the tailstock to the support beam, allowing fast adjustment to the length of the workpiece. Vertical axis configuration. 5 axis configuration. GYRMATIC 500 basic version fitted with retractable torch support add-on GYRMATIC 500 fitted with torch support and pneumatic tailstock add-ons with support beam
5 GYRMATIC 350 & 500 User-friendly and straightforward welding cycle programming. Manual control to start up part rotation with direction selector. Display of rotation speed (option). Raise/lower torch (option). Automatic cycle start/stop. of part rotation direction in footpedal control mode. LED display of current cycle status. of workpiece rotation direction in automatic mode. Time-delays controlling overlap area and stop time before reset. of welding mode: continuous or intermittent Adjustment of workpiece rotation speed by potentiometer to guarantee constant, regular movement of automatic cycle mode: with or without welding. of one or two lathes. Simplified operating diagram One-lathe continuous weld cycle Normal operation intermittent cycle Key: Auto cycle command Detection of part weld origin E1 E 0 + T1 T E1 E 0 + E31 T1 T Intermittent welding Overlap time Time before return Clockwise rotation Anti-clockwise rotation E31 Post-gas time E1 Trigger command E Welding arc present 5
6 1150 GYRMATIC 350 & 500 Catalogue numbers and technical specifications. GYRMATIC 350 Dimensions: Ø Ø9 Ø330 Ø9 Ø16, Supported loads: P3 kg ,6 X P mm X P kg 0 16,6 11, 8,3 5,7 31 Y P Gv P v Y mm GYRMATIC 500 Dimensions: Ø P kg Supported loads: P3 kg X mm X P Ø Y P Y mm
7 Technical specifications: Turntable GYRMATIC 350 GYRMATIC 500 Catalogue number Weld axis Rotation speed 0.9 to 18.5 tr/min 0.9 to 7. tr/min. 0.5 to.5 tr/min 0.5 to 10 tr/min Number of earth clips One 50A clip - capacity can be increased to 500 A as option Back gas option option option option Intermittent welding option option option option Mechanical specifications Machined turntable diameter Ø 350 mm Ø 350 mm Ø 90 mm Ø 90 mm Max. rotation torque 1 m/dan m/dan 5 m/dan 10 m/dan Max. workpiece diameter with tailstock Ø 300 mm Ø 300 mm Ø 500 mm Ø 500 mm Max. workpiece length with tailstock 300 mm 300 mm 800 mm 800 mm Possible tilt Manual from 0 to 90 with 7 set positions at 15 intervals Dimensions / Power supply Dimensions (L x H x D) 30 x 508 x 08 mm 30 x 508 x 08 mm 600 x 1150 x 750 mm 600 x 1150 x 750 mm Power supply 30 V / Hz 30 V / Hz 30 V / Hz 30 V / Hz Unloaded weight without welding equipment 38 kg 38 kg 10 kg 10 kg Catalogue numbers: Turntables GYRMATIC 350 GYRMATIC 500 Rotation speed: 0.9 to 18.5 tr/min Rotation speed: 0.9 to 7. tr/min Rotation speed: 0.5 to.5 tr/min Rotation speed: 0.5 to 10 tr/min Primary circuit isolating box for welding application / CE-compliant cut-off Power supply unit for primary 00 V and stand-alone operation Support table / horizontal turntable height of 930 mm Support table Torch support column Torch support column (fastens on support table) Add-ons depending on use: horizontal slide, 50 mm travel PROMIG torch support collar automatic torch support collar Pneumatic torch retraction facility (100 mm) Pneumatic slide, 100 mm travel Pneumatic slide, 00 mm travel Pneumatic power module Addition panel for pneumatic torch retraction Intermittent welding Cam for intermittent welding Chuck adapter Adapter for dia. 15 mm chuck jaw chuck, diameter Add-ons for -torch welding GYRMATIC 500 PROMIG torch support Additional 50 A earth clip Remote control Plating for remote control units Available 1 st quarter 00 Accessories for manual turntable rotation Control footpedal Use with manual or pneumatic tailstock Tailstock support beam Manual tailstock, travel 80 mm Pneumatic tailstock, travel 100 mm including pneumatic supply fittings Available 1 st quarter Large tailstock point, diameter 50 mm Other add-ons Workpiece support plate, diameter 500 mm GYRMATIC speed display option Rotating gas joint for back gas protection Available 1 st quarter 00 Additional 50 A rotating earth clip (total 500 A)
8 Imagine what your performance could be SAF reserves itself the right to embody modifications without prior notice. The illustrations, descriptions and characteristics are given for information only and do not engage the responsibility of the constructor. DISTRIBUTOR S STAMP SAF - 13, RUE D'EPLUCHES - SAINT-OUEN L'AUMÔNE CERGY-PONTOISE - CEDEX FRANCE TEL. : FAX : SAF WELDING PRODUCTS LTD - LOW MARCH LONDON ROAD - DAVENTRY - NORTHANTS NN 11 SD TEL. : TELEFAX : E mail : info.saf@airliquide.com Internet : SAF S 01 Ed. 0 QB : 1803 Photos SAF : François
Circular welding units Circular welding unit model Z (Pneumatic Torch Positioner)
ircular welding units ircular welding unit model Z-0006-598 (Pneumatic Torch Positioner) Torch stand / 20 Stroke vertical: 290 mm Stroke horizontal: 770 mm Max loading: 30 kg part no. 019.0.0305 Pivot
More informationU Range. Models U 150, U 500, U 1000 PIPE ROTATORS WITH CLAMPING ROLLER SYSTEM (patented) The welding device especially designed for pipe welding
U Range Models U 150, U 500, U 1000 PIPE ROTATORS WITH CLAMPING ROLLER SYSTEM (patented) The welding device especially designed for pipe welding Applications: For clamping, rotation and tilting of pipes
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationMERKLE CompactMIG. The professional MIG/MAG series! MIG/ MAG
MERKLE CompactMIG. The professional MIG/MAG series! MIG/ MAG www.merkle.de With synergic wire feeding system MIG/ MAG Merkle CompactMIG Functionality and ease of operation Simple, self explanatory control
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationISO 9001.CE. MONASET Tool Grinder.
ISO 9001.CE MONASET Tool Grinder www.topwork.com.tw FEATURE CM-A & CM-2 sharpen and recondition complex tool shapes and parts. Turntable and guide bar allows workpieces grinding from different direction.
More informationDIVIDING EQUIPMENT DIVIDING EQUIPMENT
64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting
More informationCentre Grinding Machines
Centre Grinding Machines 1 Type ZS 102-151 - 201 2 Technical Data of Henninger Centre Grinding Machines Machine Type ZS 102 ZS 151 ZS 201 Centre hole grinding range Ø 1-58 mm Ø 2-90 mm Grinding wheel spindle
More informationProduct Information. Circumferential Welders
Product Information Circumferential Welders Microprocessor Control Three Models For all Welding Processes Large Weight Capacities Operator Friendly Various Part Lengths Introduction Jetline offers a unique
More informationOrbital welding systems and accessories for high-purity process piping
ORBIWELD TP Open orbital weld heads The ORBIWELD TP series offers outstanding features in terms of design and functionality: An extremely compact design has been achieved thanks to the drive motor that
More informationModular transfer system. PDF- Catalog Modular Transfer System
Modular transfer system PDF- Catalog Modular Transfer System 1 Modular Transfer System TLM 1000 156, route de Lyon 38300 DOMARIN FRANCE Phone (33) 4 37 03 33 55 Fax (33) 4 37 03 33 59 September 2001 edition
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationOTTO ARC TABLE OF CONTENTS INTRODUCTION PIPE SYSTEMS CONTACT US! ARC-PS (Pipe System) ARC-3R (Pressing Roller Pipe Welding System)
OTTO ARC INTRODUCTION Otto Arc Systems, Inc., formerly Otto Tool, has been in business for over 27 yrs. We have provided Beveling and Facing Equipment since the day we opened our doors and have been expanding
More informationQIROX : The system for automated welding and cutting.
QIROX 217 QIROX : The system for automated welding and cutting. QIROX is the new CLOOS product brand comprising all solutions for automated welding and cutting. Due to its modular design, the QIROX system
More informationAUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS No Hose or Cable Wrapup Regardless of Direction of Rotation. Oxy-Fuel Cutting Units. Plasma Cutting Units. Welding Units. CYPRESS WELDING
More informationCHENG KUANG WOOD MACHINERY WORKS CO., LTD.
Three initial infeed tables. Automatic feed to pre-press assemble stand. CHENG KUANG WOOD MACHINERY WORKS CO., LTD. Fully Auto Finger Jointing Line Turn your wood waste into valuable material and create
More informationPRECISA 201 page 41. Torches MIG/MAG page 42 Wear parts for MIG/MAG torches page 43
CHAPTER welding WELDING Transformer technology power sources EASYMIG 0 / / / DUAL page MAXISTAR 0 M / 00 M / 0 T / 0 T page BLUMIG C / C / C / C / C / C page BLUMIG 0 S / S / 0 S / 0 S page TF 00 / 00
More informationAUTOMATIC CIRCLE BURNING AND WELDING
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS No Hose or Cable Wrapup (Regardless of Direction or Rotation) Oxy-Fuel Cutting Units, Plasma Cutting Units Wire Feeders and Controls, Motorized
More informationBuildPro Welding Tables
Introducing the new BuildPro Welding Tables The affordable, professional BuildPro Welding Tables are setting a new standard in price and performance. Plates can be reconfigured to extend the width of the
More informationKELLENBERGER100 The universal platform for cylindrical grinding
KELLENBERGER100 The universal platform for cylindrical grinding KELLENBERGER 100 The new definition of a CNC cylindrical grinding machine 2 Universal workhead Applications with fixed or rotating spindle
More informationGENYMAB RANGE SOMAB. Combination of a 5-axis machining centre and a lathe
SOMAB GENYMAB RANGE GENYMAB RANGE Multi function machining centre Turning, milling, gear machining From 4 to 9 axes, with tool changer SOMAB Société de Mécanique et d Automatisme du Bourbonnais Switchboard
More informationAUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS No Hose or Cable Wrap-up Regardless of Direction of Rotation. Oxy-Fuel, Plasma Cutting and Welding Units Available. Bug-O Systems is guided
More informationPfiffner Hydromat HB 45/12, HB 32/16, HB 32 45/16
Pfiffner Hydromat HB 45/12, HB 32/16, HB 32 45/16 Flexible Rotary Transfer Machines Horizontal transfer system Complete, double-side machining as part of the process Optimised for performance Model Brochure
More informationQIROX Sensor systems. Top quality with each weld seam
QIROX Sensor systems Top quality with each weld seam Precision work! Looking into space requires maximum optical precision. Just as your production processes with automated welding technology. Sensors
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationTUR 6MN WITH LOADING CRANES. TUR 4MN 3000 x
TUR 4MN 3000 x 22 000 TUR 6MN WITH LOADING CRANES This lathe, produced for American client, has a unique bed configuration. It consists of two independent beds mounted on a special foundation. This solution
More informationSPS TECHNIK. everything from a single source
SPS TECHNIK everything from a single source planning and execution simulation electrics and mechanics design production, mounting software development commissioning after-sales service PRODUCTS AND SERVICE
More informationASSEMBLY MANUAL POLAR GRIPPERS
ASSEMBLY MANUAL POLAR GRIPPERS 2012 TABLE OF CONTENTS TABLE OF CONTENTS... 2 PRESENTATION... 3 AMG GRIPPERS FOR ROBOTS... 4 PREPARATION OF THE PARTS... 5 PREPARING A MAIN BOOM... 6 PREPARING A SECONDARY
More informationThe new DuoDoweler DDF 40: Simple. Versatile. Precise.
DuoDoweler DDF 40 The new DuoDoweler DDF 40: Simple. Versatile. Precise. The DuoDoweler DDF 40 introduces greater ease and efficiency to the task of drilling accurate dowel holes. Its hallmarks are a broad
More informationWM en. Zero point clamping system SPEEDY airtec 1
SPEEDY airtec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY classic you will increase your productivity to a maximum. Adjustment and checking processes are no longer necessary
More informationNEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationFLAT BED CNC LATHE. The Most Economical, User Friendly, Yet Highly Capable CNC Lathe Available!
FLAT BED CNC LATHE The Most Economical, User Friendly, Yet Highly Capable CNC Lathe Available! Safe, Easy Operation And High Performance Are The Result Of Ingenuity And Quality Workmanship The extended
More informationNEW GENERATION TIG COLD WIRE SYSTEM. EASY 400 CLASSIC System is the latest and most innovative technology for TIG Cold wire feeders. trafimet.
trafimet.com INNOVATION FOR WELDERS NEW GENERATION TIG COLD WIRE SYSTEM EASY 400 CLASSIC System is the latest and most innovative technology for TIG Cold wire feeders. 2 EASY 400 CLASSIC System New technology
More informationTurning. MECH Dr Ghassan Al-Kindi - Lecture 10 1
Turning Single point cutting tool removes material from a rotating workpiece to generate a cylinder Performed on a machine tool called a lathe Variations of turning performed on a lathe: Facing Contour
More informationCamGrind S. Key data. Small and versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Small and versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees high-precision
More informationCatalogue 1SFC en, Edition 3 November 2003 Supersedes Catalogue 1SFC en, Edition 2 November Arc Guard System TVOC
Catalogue 1SFC 266006-en, Edition 3 November 2003 Supersedes Catalogue 1SFC 266006-en, Edition 2 November 2000 Arc Guard System TVOC System units The two units of the are used as below: Approvals 1. with
More informationGF Machining Solutions. System 3R. Mecatool WEDM. Productportfolio. Version 2, valid from July 1st. 2017
GF Machining Solutions System 3R Mecatool WEDM Productportfolio Version 2, valid from July 1st. 2017 Design and quality by System 3R Contents Zeroline...page ICS...page 7 Unimatic...page 15 Accessories...page
More informationCNC EXPANDING MANDRELS
CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate
More informationthroughfeed moulders superset tx automatic throughfeed moulder
throughfeed moulders superset tx automatic throughfeed moulder superset tx automatic throughfeed moulder Topset XL is the ideal solution for producing prismatic profiles, frames, profiles and linear parts
More informationVersatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY
Versatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY Torque range: from 6 up to 1 Nm Pistol models and angle models with flat angle head, 90 angle head,
More informationAutomatic Fastener Feeding Systems
Automatic Fastener Feeding Systems Automatic Fastener Feeding Systems The Improvement of productivity and quality has been the driving force in the development of the CP Desoutter range of fastener feeding
More informationPF 61 Universal Cylindrical Grinding Machine PF 61 Universal Cylindrical Grinding for Flexible Production Thanks to its modular design, the PF 61 universal cylindrical grinding machine is your ideal choice
More informationPROMIG-250SYN/250SYN Pulse
PROMIG-250SYN250SYN Pulse Welding excellent Quick Specs TOP Features: Processes: MIGMAG, Flux-Cored, Pulse MIG, TIG, MMA(Stick) Input Power: 200-240V1-PH50-60Hz Rated Output at 40 (104 ): 250A26.5V60%
More informationPicoTurn CNC. PicoTurn CNC. High-tech and suitable for training purposes. Mini CNC Lathe.
Mini CNC Lathe High-tech and suitable for training purposes with advanced GPlus 450 CNC or Siemens 808 D control with autom. 4-station tool changer center width 550 mm Small CNC Machine for training as
More informationAURIGA Uncompromising edge banding. Workpiece thickness up to 60 mm
Edge banders CNC machining centres Vertical panel saws Pressure beam saws Uncompromising edge banding AURIGA 0 04 Workpiece thickness up to 60 mm P R O D U C T I V I T Y A N D P R E C I S I O N A U R I
More informationAUTOMATION ACCESSORIES
RG SERIES AUTOMATION ACCESSORIES The Vision System Faster than contact probes, the ultra-highspeed vision system gives integrated, closed loop control of the machine using the image from the camera. The
More informationEPCA Germany. Cutting Edge Technology. experience matters
Cutting Machines EPCA Germany Cutting Edge Technology EPCA Germany stands for long year expertise, in-depth knowledge, excellent service quality and understanding of automation processes. With EPCA Germany
More informationStudent, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
More informationProfessional welding tables
Professional welding tables WELDING TABLES ACCESSORIES STOPS PRESSURERS/CLAMPS/GRIPS BOLTS weldingmaster We are the manufacturers of modular welding tables. Weldingmaster tables are highly innovative products,
More informationMultipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine For workshop application, single parts production and training purposes Servo motors and preloaded ball screws on all axes Infinitely
More informationVersatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY
Versatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY Pistol models and angle models with flat angle head, 90 angle head, worm drive Torque range: from 6
More informationTectus TE 680 3D FD TECTUS TE 680 3D FD. The concealed hinge system for timber entrance doors
Tectus TE 680 3D FD TECTUS TE 680 3D FD The concealed hinge system for timber entrance doors 2 Tectus TE 680 3D FD Index TECTUS TE 680 3D FD The concealed hinge system for timber entrance doors 4 Sealing
More informationEldon Tool and Engineering Limited
Eldon Tool and Engineering Limited Precision engineering at its best Eldon Tool & Engineering Ltd Eldon Engineering Company Limited was established in 1975 to provide a sub-contract machining service to
More informationolimpic e10-t20 manual edge bander and trimming machine for straight and shaped panels. (0) Web
Tel +44 olimpic e10-t20 manual edge bander and trimming machine for straight and shaped panels. olimpic e 10 olimpic t 20 olimpic e10 manual edge bander for straight and shaped panels. O3 Simply essential
More informationsi 300 s nova manual, electronically programmable circular saws si 7500
si 300 s nova manual, electronically programmable circular saws si 7500 scmcircular saws The widest range of circular saws offering the market the latest and advanced technological solutions that different
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationValve repair and testing technique
High standard in precision. Valve repair and testing technique Quality Made in Germany by GmbH & Co. KG Grinding and Lapping Machines for Industrial Valves VENTA Portable grinding and lapping machines
More informationROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table
Horizontal & Vertical Rotary Table (HVRT) OPERATION AND SERVICE MANUAL Tilting Rotary Table Horizontal & Vertical Rapid Indexer VERTICAL AND HORIZONTAL ROTARY TABLE This Horizontal & vertical table is
More informationsi 300 s nova electronically programmable and manual circular saws
si 300 s nova and manual si 75 scm The widest range of offering the market the latest and advanced technological solutions that different types of production urgently requires. O3 L invincibile the exclusive
More informationELECTRONIC DOUBLE HEAD CUTTING MACHINE 500 TS
ELECTRONIC DOUBLE HEAD CUTTING MACHINE 500 TS 500 TS - 500 CD - 500 D2K Electronic double head cutting machine The double head cutting machines made by Pertici boast unique features in terms of build quality
More informationVision Measuring Systems. KOMEG opti-fix PRE The modular clamping system for vision measuring systems
Vision Measuring Systems KOMEG opti-fix PRE 983040 The modular clamping system for vision measuring systems KOMEG: Noticeably More Experience. Measurably Better Results. KOMEG OPTI-FIX Substantiated experience,
More informationUNIVERSAL CENTRE LATHES
UNIVERSAL CENTRE LATHES TRADITION AND EXPERIENCE SR 6000 SR 2000 ŠKODA machine tools of different type and variant have been present in the world market for over 100 years. Among them were a lot of special
More informationMax. Swing diameter over the slide: Max. Turning diameter with MultiSuisse: Max. Turning diameter with tool turret: distance between centers:
CYCLE-CONTROLLED PRECISION LATHE SE 320 NUMERIC Description The SE 320 NUMERIC machine is a universal CNC-lathe machine with digitally controlled drives and a cycle control for the processing of bottles
More informationSAMPLE PREPARATION SPECTRAL MM. metkon.com
SAMPLE PREPARATION SPECTRAL MM metkon.com AUTOMATIC,FINE SURFACE MILLING MACHINE SPECTRAL MM SPECTRAL MM is designed for automatic sample preparation of OES and XRF analysis. It is fast and efficient in
More informationTOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information
Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...
More informationCurrent status of Disk Lasers for sheetmetal cutting and welding
Current status of Disk Lasers for sheetmetal cutting and welding Iwan Papic, Gerry Jones TRUMPF Luton AILU 12 November 2008 Disk lasers for cutting and welding 12.11.2008 Presentation outline Disk laser
More informationThe enriched system configuration designed based on the loader head accommodates a wide range of automation needs.
CNC Lathe These are high-precision chucking machines equipped with a general-purpose in-machine loader head. The loading time is shortened substantially through coordinated operation of the loader head
More informationALUMIG-250P/300P. Compact Synergic Pulse MIG. Strong power, Multi-functions, Superb performance and Economical choice. Features: Application:
Features: Process: MMA, CO/MAG, Pulse MIG, Double Pulse MIG Soft-switching IGBT inverter system Full digitalized control system, friendly operation interface Synergic operation Precise, clean arc ignition
More informationRotary gear motor series AG8...
Rotary gear motor series AG8... The electric actuator belonging to AG8 series is designed to operate gas valves and air dampers in ventilation and air conditioning systems. The compact design and universal
More informationShaftGrind S. Key data. Compact and extremely versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Compact and extremely versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationCincom Evolution Line
Efficient Production Impressive Value Cincom Evolution Line Sliding Headstock Type Automatic CNC Lathe Cincom Evolution line from Citizen Introducing the K16E faster processing with outstanding ease-of-use.
More informationAlufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition
ALUFIX BASIC SETS 2 ALUFIX BASIC-SETS Alufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition ALUFIX BASIC-SETS Note:
More informationWOOD LATHES. Woodworking Equipment. sales hotline Wood Lathe 1 Metre Starter Kit Variable Speed Midi Wood Lathe Cast Iron
01488 Wood Lathe 1 Metre Starter Kit The heavy-duty ½hp induction motor gives smooth reliable performance and means this lathe is ideal for both spindle and faceplate turning. This machine is ideal for
More informationWELDING POSITIONING EQUIPMENT. JMT offers quality machine tools for all your sheet metal fabrication needs.
WELDING POSITIONING EQUIPMENT JMT offers quality machine tools for all your sheet metal fabrication needs. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT sells and services
More informationProfessional Power Tools & Accessories
Professional Power Tools & Accessories NEW Engine and outputs sold separately. 6.5HP 3L 20cm Ø 3150min -1 2.4KW (50Hz) 10.5A (230V) 21A (110V) 230V (16A) BS4343 AC 175 Bar 6m 8L / in 1L Powered by 75mm
More informationNEW EASYLOCK ZERO POINT CLAMPING SYSTEM. Palletising and clamping tools from a single source
NEW EASYLOCK ZERO POINT CLAMPING SYSTEM Palletising and clamping tools from a single source EASYLOCK ZERO POINT CLAMPING SYSTEM Clamping the workpiece can be a time-consuming and cost-intensive factor
More informationKM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
More informationCamGrind Cylindrical and noncircular grinding
A member of the UNITED GRINDING Group CamGrind Cylindrical and noncircular grinding Key data Camshaft grinding to perfection! The CamGrind series offers modular precision machines for cylindrical and noncircular
More informationPrecision and high repeat accuracy for individual parts and small series manufacture. Made in Germany.
PROXXON - PD 400/CNC 1 Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany. Z-axis and X-axis with recirculating ball spindles and two powerful step motors.
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationSR2. Rotative blowing for large mass productionof packagings from 0,1 L to 2 L
SR2 Rotative blowing for large mass productionof packagings from 0,1 L to 2 L SR2 PRODUCTION : Maxi Dimensions : Closing force : 1 T Volume : 2000 cm3 Height : 320 mm Diameter : 100 mm MAXIMUM USUAL DIMENSIONS
More informationWT4015MP - TIG-MMA-Plasma Multi-Function Inverter Welder TIG, A & MMA, A amps Plasma 20-40A Ex GST Inc GST
WT4015MP - TIG-MMA-Plasma Multi-Function Inverter Welder TIG, 15-150A & MMA, 30-150A amps Plasma 20-40A Ex GST Inc GST Features ORDER CODE: Type: MODEL: $894.00 $1,028.10 W1124D TIG/ MMA / PLASMA WT4015MP
More informationAUTOMATOR INTERNATIONAL
AUTOMATOR INTERNATIONAL Marking Systems IMPACT MARKING Impact and roller marking machines available as manual, pneumatic, electro-pneumatic models for permanent marking HOT MARKING Hot marking for products
More informationARCMASTER. 401MST Multi-Process Inverter Power Source Part No. W
ARCMASTER 401MST Multi-Process Inverter Power Source Part No. W1009500 Leading New MICOR Technology High Efficiency Resonance Inverter Best In Class Welding Performance Built Tough For Extreme Use Lightweight
More informationCamGrind L. Key data. Superproductive and perfect for batch production. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Superproductive and perfect for batch production Key data The as a single-slide or two-slide machine allows you to machine shaft-type components with a length of up
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationMONASET CM-2. Has these customer proven features...
MONASET CM-2 Has these customer proven features... We looked at our successful Monaset grinder very closely before we came up with the engineering refinements which, when combined with its field proven
More informationSUMMARY. V-Lock SYSTEM BASIC ELEMENTS ACTUATORS. P V-Lock GENERAL INTRODUCTION 2. P V-Lock FIXING ELEMENTS 10 SUMMARY. P V-Lock ADAPTORS 17
SUMMARY A3 V-Lock SYSTEM P V-Lock GENERAL INTRODUCTION 2 BASIC ELEMENTS P V-Lock FIXING ELEMENTS 10 P V-Lock ADAPTORS 17 SUMMARY P PROFILES 28 P V-Lock ACCESSORIES AND SPARE PARTS 32 1 A3 GENERAL INTRODUCTION
More informationSlovácké strojírny, a.s. závod 8 - TOS Čelákovice Stankovského Čelákovice CZECH REPUBLIC
ČELÁKOVICE GPS: 50 9'49.66"N; 14 44'29.05"E Slovácké strojírny, a.s. závod 8 - TOS Čelákovice Stankovského 1892 250 88 Čelákovice CZECH REPUBLIC Tel.: +420 283 006 227, 213 Tel.: +420 283 006 217 Fax:
More informationMacroJunior & MacroCombi
MacroJunior & MacroCombi gives extreme flexibility one chuck, two systems reduces setting-up times. ensures precision and quality is suitable for automatic changing with System 3R s automation program.
More informationSPRINT 1320 /1321. Special Machines. The benchmark for flexibility and high productivity. Y our partner for productivity and precision
SPRINT 1320 /1321 The benchmark for flexibility and high productivity Y our partner for productivity and precision Special Machines SPRINT 1320 /1321 Two series, individual equipment packages SPRINT 1320
More informationMultipole connectors
ultipole connectors BIG i GLISH 89 Dolomite Drive Toronto ON 3J 2N1 Canada Tel: (416) 3-7223 Fax: (416) 3-7224 sales@itcproducts.com www.itcproducts.com BIG enclosures The space you have always wanted...
More informationCamGrind L. Key data. Superproductive and perfect for batch production. A member of the United Grinding Group
A member of the United Grinding Group Superproductive and perfect for batch production Key data The as a single-slide or two-slide machine allows you to machine shaft-type components with a length of up
More informationCAMLESS CNC 6-SPINDLE BAR MACHINE
CAMLESS CNC 6-SPINDLE BAR MACHINE B6-16 / B6-27 / B6-32 FOR YOUR TIME & COST SAVINGS SHIMADA MACHINERY CNC - Multi Spindle Machine Shimada s B6 NC Series Lathes are a family of Camless 6-spindle fed with
More informationCSNC CARBIDE CIRCULAR SERIES
CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT
More informationMill Specifications. FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle
Mill Specifications FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle 8.00" (203 mm) 8.00" (203 mm) 9.00" (229 mm) Throat (without headstock spacer block) Throat (with headstock
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationCONSTRUCTION MATERIALS SERVICE CONDITIONS. Alternative alloy materials, like AISI 904L or DUPLEX stainless steel, are available if required.
SLIDE GATE The model is a rectangular penstock suitable for wall and thimble mounting, with a resilient sealing member applied to all 4 sides. There are two different designs, which are size dependent,
More information