Briney. Tooling Systems INDEX

Transcription

1 ITEM PG. bout riney...2 Shank ata...3 Shrink Fit enefits...4 Shrinker dvantages...5 Induction Heating Units...6 Thermax & ccessories Tru-Therm & ccessories Induction Unit hanging System...11 Induction Heating Units...11 Induction Machine ccessories...12 ooling evices...13 Shrinker Tooling V-Flange Tooling V-Flange Tooling T Flange Tooling T Flange Tooling...18 HSK32 Tooling...19 HSK32 Tooling...20 HSK32E Tooling...21 HSK63 Tooling...22 HSK63 Tooling...23 HSK63E Tooling...24 HSK63SF Tooling...25 HSK100 Tooling...26 HSK100 Tooling...27 epth Setting Units...28 Locking Rings...29 Micrometer Head...29 Induction Spacer Rings...30 HSK oolant Tubes...31 Installation Wrenches for oolant Tubes...31 oolant Thru ore Tooling...32 Precision N Toolholding...33 Recommended Machine Start-up Tooling Packages Eccentric ore Toolholders Ordering oolant Thru Face Tooling...38 High Speed alanced Tooling...38 alance Information Tru Velocity & Maximum Velocity...39 V40 End Mill dapters Stub Length...40 V40 End Mill dapters ST. Length...40 V40 End Mill dapters Int. Length...40 V40 End Mill dapters Ext. Length...40 V40 Metric End Mill dapters...41 V40 Morse Taper dapters...41 V40 Jacobs Taper dapters...41 V40 ouble ngle ollet hucks...41 V40 riney Flex ollet hucks...42 V40 TG ollet hucks...42 V40 Ultra Precision ollet hucks (ER)...42 V40 oring Head dapters...43 V40 lank ars...43 V40 Precision Test ar...43 V40 Shell Mill dapters...44 V40 Ext. Length Shell Mill dapters...44 V40 Stub rbor Screw Type dapters...44 V40 Stub rbor Nut Type...44 V45 End Mill dapters Upon Request...45 V50 End Mill dapters Stub Length...46 V50 End Mill dapters Std. Length...46 V50 End Mill dapters Ext. Length...47 V50 End Mill dapters Extra Ext riney INEX V50 Metric End Mill dapters...48 V50 Morse Taper dapters...48 V50 Jacobs Taper dapters...48 V50 ouble ngle ollet hucks...48 V50 riney Flex ollet hucks...49 V50 TG Style ollet hucks...49 V50 Ultra Precision ollet hucks (ER)...49 V50 oring Head dapters...50 V50 lank ars...50 V50 Precision Test ar...50 V50 Shell Mill dapters Std. Length...51 V50 Stub rbor Screw Type...51 V50 Stub rbor Nut Type...51 T30 End Mill dapters...52 T30 Jacobs Taper dapters...52 T30 TG ollet hucks...52 T30 Ultra Precision ollet hucks (ER)...53 T30 Shell Mill dapters...53 T35 End Mill dapters Upon Request...53 T40 End Mill dapters Stub Length...54 T40 End Mill dapters Std. Length...54 T40 End Mill dapters Ext. Length...54 T40 Morse Taper dapters...55 T40 Jacobs Taper dapters...55 T40 ouble ngle ollet hucks...55 T40 riney Flex ollet hucks...56 T40 TG ollet hucks...56 T40 Ultra Precision ollet hucks (ER)...56 T40 lank ars...57 T40 Precision Test ars...57 T40 Shell Mill dapters...57 T50 End Mill dapters...58 T50 Morse Taper dapters...58 T50 Jacobs Taper dapters...58 T50 TG ollet hucks...59 T50 Ultra Precision ollet hucks (ER)...59 T50 lank ars...59 T50 Precision Test ars...60 T50 Shell Mill dapters...60 NMT Q 30 End Mill dapters Standard Length...61 NMT Q 30 Jacobs Taper dapters...61 NMT Q 30 ouble ngle ollet hucks...61 NMT Q 30 TG Style ollet hucks...62 NMT Q 30 Shell Mill dapters...62 NMT Q 40 End Mill dapters...63 NMT Q 40 Morse Taper dapters...63 NMT Q 40 Jacobs Taper dapters...63 NMT Q 40 TG Style ollet hucks...64 NMT Q 40 Shell Mill dapters...64 NMT Q 50 End Mill dapters...65 NMT Q 50 Morse Taper dapters...65 NMT Q 50 Jacobs Taper dapters...65 NMT Q 50 TG Style ollet hucks...66 NMT Q 50 Shell Mill dapters...66 HSK...67 HSK Technical ata...68 HSK 63 End Mill dapters...69 HSK 100 End Mill dapters...69 HSK 63 R ollet huck dapters...70 HSK 100 R ollet huck dapters...70 HSK 63 Shell Mill dapters...70 HSK 100 Shell Mill dapters...70 HSK oolant Tubes...71 HSK oolant Tube Wrenches...71 Tightening Fixtures...72 Locking Tightening Fixture...72 Shell Mill Screws...73 Shell Mill rive Keys...73 End Mill Set Screws...73 Stop Screws...74 Stub rbor Nuts...74 Stub rbor Spacer Sets...74 Stub rbor Nut Spacer Sets...74 Tool Storage Units & ccessories...75 SpindleMate leaner Kits...76 ILZ V Flange Tap Holders T/ ILZ T Flange Tap Holders T/...78 ILZ NMT Flange Tap Holders T/...78 ILZ Straight Shank Tap Holders T/...78 ILZ V Flange Tap Holders Rigid...79 ILZ T Flange Tap Holders Rigid...79 ILZ NMT Flange Tap Holders Rigid...79 ILZ Straight Shank Tap Holders Rigid...79 ILZ Tap dapters Positive rive...80 ILZ Tap dapters Torque ontrol...80 riney V Flange Tap Holders T/...81 riney T Flange Tap Holders T/...81 riney NMT Flange Tap Holders T/...81 riney Straight Shank Tap Holders T/...81 riney V Flange Tap Holders Rigid...82 riney T Flange Tap Holders Rigid...82 riney Straight Shank Tap Holders Rigid...82 riney Tap dapters Positive rive...83 riney Tap dapters Torque ontrol...83 Tap Holder Shanks...84 Tapping Head Holders...84 Tap Extensions...85 Straight Shank End Mill dapters...86 Straight Shank Shell Mill dapters...86 ouble ngle ollet Extensions...87 ouble ngle ollet Nuts...87 ouble ngle Wrenches...87 TG ollet Extension...88 TG ollet Nuts...88 TG Wrenches...88 riney Flex ollet Extensions...89 riney Flex ollet Nuts...89 riney Grip ollet Nuts...89 F Wrenches & G Wrenches...89 Ultra Precision ollet Extensions (ER)...90 Ultra Precision ollet Nuts (ER)...90 Ultra Precision Wrenches (ER)...90 Jacobs Plain earing hucks...91 Jacobs all earing hucks...91 Jacobs High Precision Keyless all earing hucks...92 Jacobs High Torque/High Precision Keyless all earing hucks...92 ouble ngle ollets ()...93 TG075 ollets (TG)...94 TG100 ollets (TG)...94 TG150 ollets (TG)...94 riney Flex ollets...95 Ultra Precision ollets (ER) Retention Knobs nsi & incinnati...98 Retention Knobs ISO & JMT...99 Retention Knobs Machine Index

2 riney bout riney riney is an ISO 9001-certified Michigan based privatelyowned corporation with a dedicated commitment to quality from the corporate executives, managing staff, and the entire highly-skilled work force. riney operates two shifts and employs approx. 100 people, all committed to serving the merican machining industry and the world market. riney uses the Quality Team manufacturing philosophy, implementing the best ideas from all levels of the company, thus producing quality products and new innovative manufacturing ideas and tooling designs. SELETION Look to riney for the most complete line of tooling for your N machining center or your manual milling machine: V Flange Shank 30, 40, 45, 50; T Shank 30, 35, 40, 50; NMT(Q) Shank 30, 40, 50; QSwitch 100, 200, 300, 400 and Qhange; Straight Shank tools; ilz Quick hange Tapping systems for all shank styles; riney Quick hange Synchronized Tapping systems (for rigid tapping machines with coolant thru spindles); Jacobs rill hucks, and the most complete line of collet systems available in the industry. TG, ER,, and riney Flex, collets are available from stock in all the popular sizes. You can count on riney to have the tools you need for any machine style, in stock for immediate delivery. QULITY Shank quality is the key to machining accuracy. riney shanks and bores are ground on state-of-the-art N grinding equipment, enabling riney to provide the most accurate shank and concentricity in the industry. ll shanks are traverse-ground to T3 NSI tolerance (.001 taper per ft.) and inspected with the latest, most accurate air/electronic dedicated gaging system. Toolholder I..s (collet chuck tapers, end mill adapters, etc.) are traverse-ground on N I grinders under simulated operating conditions. This enables riney to offer size repeatability and concentricity of.0002 or less from the tool shank to the bore. ll grinding operations are closely monitored to ensure the highest quality and consistency in the industry. The result of these quality features is superior performance, longer tool life, increased speeds and feed rates, and better surface finish resulting in lower operating costs. Materials used for all riney Tooling are certified and traceable to NIST standards. With in-plant heat treating, riney controls the carbonizing and hardening process to ensure all tools have a.050 minimum case depth to maximize tool life and reduce distortion from prolonged use, mishaps, and mishandling. Shanks are ground after black-oxide to guarantee the best concentricity, superior finish, and better spindle contact. The critical grinding process is the last operation. This eliminates any distortion by heat treating or changing surface conditions of the tool. These conditions will affect the concentricity or cause the tool to be difficult for your toolchanger to operate. oth deeper case hardening and superior shank accuracy extend tool life, providing superior quality and superior value. SPEIL TOOLING ount on riney to manufacture your special tooling requirements to the same high quality as standard riney products. Just fax your requirements to , and you will receive a prompt quotation on your requirements. Our design team will provide a computer designed print for your approval before manufacturing to insure tooling is manufactured precisely to your specifications. LNE TOOLING riney leads the industry with the most complete line of high quality balanced tools. hoose the tooling to match your machining speeds. While the improved design of our standard tooling will perform well in most machining applications, for higher spindle speeds choose our Tru Velocity TM (TV) tooling. riney s Tru Velocity line is balanced to 20,000 RPM. For even higher speeds, riney s Maximum Velocity TM (MV) tooling is fully balanced and designed to perform up to speeds of 30,000 RPM. lso available from riney is alanced Engineered tooling for ultra high-speed applications you choose the speed, and we ll balance to it. Whatever your balanced tooling needs, riney is your choice for tooling. 2

3 riney SHNK T SHNK SIZE V30 V40 V45 V50 GGE LINE /2-13 5/8-11 3/ V FLNGE SHNKS SHNK SIZE GGE LINE *T30 *T35 T40 T M12 M12 M16 M24 NOTE: Made to JIS Specifications (equivalent to ISO 7388/1-1983) *.4920 pilot for pull stud E T SHNKS SHNK SIZE GGE LINE NMT OR QUIK HNGE SHNKS NMT or Q30 NMT or Q40 NMT or Q /2-13 5/

4 riney SHRINKER TOOLING ENEFITS For critical high speed or high precision cutting applications, the Shrinker's TIR and tremendous holding strength are benefit enough most toolholders simply can't achieve this degree of precision. Shrinker technology and design provides these benefits: est possible TIR (Total Indicator Reading). est possible balance. est available gripping power. Increased tool and spindle life. Fastest tool change in seconds! Thin profile holders for machining hard-to-reach places. esign and build custom holders for any application. Short gage lengths available for increased rigidity. bility to preset for required tool length. Ideal for end milling, drilling, reaming, boring and all other critical rotary tool applications regardless of cutting tool material. Eliminates wrenches, collets, set screws and other accessories. Reduces costs associated with tool changes, holder maintenance and machine downtime. HOW IT WORKS: The concept is simple. Each Shrinker toolholder is manufactured with an inside diameter slightly smaller than the shank diameter of the cutting tool. heat induction unit is used to quickly heat the holder end of the Shrinker, expanding this inside diameter. t this point, the tool shank slips easily into the holder. s the holder cools, the resulting thermal contraction exerts a tremendous, uniform pressure around the entire surface of the tool shank. No moving parts... no accessories... just total concentric gripping strength. Heat expands the inside diameter. ooling contracts the inside diameter. Removing the tool is just as simple you simply reverse the process! Tool changes can be accomplished in seconds, dramatically increasing machining productivity by reducing tool change downtime. 4

5 SUPERIOR ONENTRIITY - The concentricity of Shrink Fit Tooling is guaranteed.0002 or better with the cutting tool set in the shrunk condition. SUPERIOR LNE - Shrink Fit Tools are manufactured for high speed operation. alance pockets are machined in the drive keys on all V-Flange tooling, eliminating the inherent imbalance in V-Flange tooling. Shrink Fit tools are dynamically balanced on our Hoffman 2 plane balancing machine to G 2.5 at 20,000 RPM's. Special tools have been manufactured at a G 1.0 tolerance at 40,000 RPM. This results in balanced chip loads, better finishes, and increased speeds and feed rates. With no set screws and no moving parts, the toolholder remains in balance leaving the cutting tool as the only variable. SUPERIOR RIGIITY - The average gripping force imposed on the shank of the cutting tool is 10,000 lbs. more than 5 times that of collet, milling, or hydraulic chucks. It would take over 100 horsepower in order to turn the tool within the bore of the toolholder. n additional advantage is the shank of the tool is gripped 360 degrees the entire length of the bore. Impossible with milling chucks and hydraulic chucks. These chucks leave an area of up to 1/4 inch from the end of the toolholder with no force applied to the tool shank. Using the Shrinker gives you the closest possible rigidity to an Integral Shank Tool with lower costs and more flexibility. SUPERIOR TOOL LIFE - The Shrinker Toolholding System extends tool life up to 100% or more. With the superior holding force, concentricity, and balance, the chip load is evenly distributed on the cutting edge. The rigidity established with the Shrinker enables cutting tool technology to be pushed to the maximum. SUPERIOR HIGH SPEE OPERTION - In extreme high speed operations centrifical force becomes an important factor in desired speeds and feed rates. With the holding force induced by the Shrinker system being superior, no other system can meet and maintain the clamping force. The Shrinker System is a must in extreme high speed applications and is superior at any speed. very important feature of alanced Shrinker Tooling is the extended spindle life with the superior balance and rigidity the Shrinker offers. SUPERIOR OPERTING PRMETERS - No holding system offers shorter extension length capability with concentricity of.0002 or less. Milling and hydraulic chucks offer excellent concentricity, but the mechanical clamping system requires additional extension and sacrifices rigidity. onventional end mill holders can provide very short extension lengths, but sacrifice concentricity and provide 2 or 3 point clamping. The thin profile required for the Shrinker enable the operations to be performed with less interference. Tooling can be preset by simply controlling the depth the shank extends into the bore. SIMPLE OPERTION - The Shrinker System is truly the easiest system to use. The induction tool changer is by far the fastest and simplest method to change tooling. The average induction cycle takes 7 seconds to expand the bore, enabling the operator to remove the dull tool and insert the new tool. Seconds after the new tool is inserted, the bore shrinks back and can then be cooled. No wrenches to find, no vices, uniform chucking without torque wrenches, and faster than conventional clamping methods. ONLUSION - The Shrinker Thermo ontraction Toolholding System is by far the most economical system in the world today. The increased productivity and increased tool life can be measured. dditionally, reduced toolchange down time will contribute to the considerable reduction in costs. riney SHRINKER VNTGES 5

6 INUTION UNIT riney INUTION HETING UNITS INUTION HETING UNITS TTIU TT TI 10/10 N ooling evices TT TTIU TI 10/10 N12 6

7 THERMX riney INUTION HETING UNITS The riney THERMX Heat Shrink Unit opens the door to professional grade Shrinker tooling technology. This system offers; 7.5 kw output power operating at khz, minimum 30% duty cycle, superior coil efficency, and operating consistency. Safety features are also built in: overcurrent, overvoltage, overtemperature protection, which distinguishes riney THERMX. INUTION UNIT Foolproof operation is designed into THERMX. hoose the coil that fits the toolholder nose, insert into the vertical slide, lower slide, and press the carbide or steel keyswitch on the simple control panel. The PL manages the preprogrammed cycle from there. Toolholder bores expand in seconds to permit insertion or removal of the cutting tool. oil retracts automatically after heating cycle is complete. ooling is accomplished rapidly with the most efficient fans available conveniently integrated into the base. So you can prepare several tools at a time. Tool capacity range from in. (3mm - 25mm), in length. THERMX is also provided with your choice of 5 different heat sinks for high-efficiency cooling, 4 heating coils and a cooling sleeve. Protection from overheating of toolholder with timed cycles. THERMX ESSORIES THERMX INUTION HETING UNIT NUMER ESRIPTION TTIU Vertical unit with 220V/3 phase power requirement. INUTION UNIT SE POT NUMER -LR-SE

8 INUTION UNIT riney THERMX ESSORIES TPERE HOLER RING NUMER LR - V40 LR - HSK32 LR - HSK40 LR - HSK50 LR - HSK63 LR - HSK80 HET SINK NUMER o -IR /-.25 o -IR /-.25 o -IR-025, 6M /-.25 o -IR /-.25 o -IR-038, 8M,10M /-.25 o -IR /-.25 o -IR-050, 12M /-.25 o -IR-062, 14M, 16M /-.25 o -IR-075, 18M, 20M /-.25 o -IR /-.25 o -IR-100, 25M /-.25 o -IR-125, 32M /-.25 o -IR /-.25 o -IR /-.25 o -IR-6M, 8M /-.25 o -IR-10M, 12M /-.25 o -IR-14M, 16M /-.25 o -IR-18M, 20M /-.25 o -IR-25M, 32M /-.25 o o o o o o o o o o o o o o o o o o o OOLING SLEEVE NUMER -IR-HOUSING

9 TRU-THERM riney INUTION HETING UNIT ENHNE ONTROL - This high quality power supply provides more than ample power for shrink-fit heating applications. With 7.5 kw, cutting tool sizes can range from 3/16 through with HSS in sizes larger than 3/8. INUTION UNIT With its water cooled induction coils it offers unmatched durability. The water flow allows for the use of copper coils for the induction coil. These coils are far more efficient and several times more durable than the wrapped wire coils. This system also features a four station tool holder chilling unit built right into it. It uses an enclosed circulating coolant system to quickly draw the heat from the tool holder. With the quick-change removable cooling sleeves, you can switch size to match your cooling needs in seconds. Touch screen programming guides the operator through the tool change cycle. It is designed for 100% duty cycle. INUTION HETING UNIT NUMER TT ESRIPTION Vertical unit with 220V/3 phase power requirement. INUTION HETING UNIT ESSORIES INUTION OILS FOR VERTIL UNIT NUMER I I oil I I oil I I oil I I oil To hange 3/16, 1/4, and 3/8 tools To hange 1/2 and 5/8 tools To hange 3/4 and 7/8 tools To hange 1 and 1 1/4 tools 9

10 INUTION UNIT riney INUTION HETING UNIT ESSORIES INUTION PTERS N REUERS NUMER TI HSK63-HSK40R TI V50-V40R TI V50-HSK40R PTS TO From HSK 63 to HSK 40 From V50 to V40 From V50 to HSK 40 OOLING EVIES TIIPS-11 Single aluminum cooling blocks to dissipate the heat from the toolholder. The interior diameter is tapered to match taper on O.. of toolholder. The toolholder uses conduction to draw the heat from the holder. The cooling blocks can be immersed in water or coolant between tool changes to speed the cooling process. verage cooling times using a cold cooling block is 90 seconds. The cooling blocks can be ordered by specifying the I size of the toolholder that is to be used. WRNING: o not immerse toolholders in water or coolant without cooling first, it could cause distortion or breakage of toolholder due to rapid cooling (quenching) of the steel. OOLING SLEEVES NUMER TIIPS TIIPS TIIPS , 6M TIIPS TIIPS , 8M, 10M TIIPS TIIPS , 12M TIIPS , 14M, 16M TIIPS , 20M, 18M TIIPS TIIPS , 25M TIIPS , 32M TIIPS TIIPS UTTING TOOL SIZE.125 TOOLS.187 TOOLS.250 & 6MM TOOLS.312 TOOLS.375,8MM, & 10MM TOOLS.437 TOOLS.500 & 12MM TOOLS.625,14MM, & 16MM TOOLS.750,20MM, & 18MMTOOLS.875 TOOLS 1.0 & 25MM TOOLS 1.25 & 32MM TOOLS 1.50 TOOLS 2.0 TOOLS 10

11 riney INUTION TOOL HNGING SYSTEM INUTION UNIT SUPERIOR ONTROL - Our ETL-approved, solid state Induction Tool hanging unit enables the operator to have total control over the heating process. The variable power setting on the machine provides a method of controlling the output of power. The power control regulates the amount of energy to be transmitted into heat and can easily be adjusted to the various sized tools. To assist in directing the correct amount of heat, the automatic cycle time control can be adjusted to the proper length of time necessary. This control can be set from 1 to 22 seconds. The normal settings for tooling from 1/4" thru 1 1/2" diameter is 70% power setting. If the outer diameter of the toolholder is relatively close in diameter to the coil the efficiency of the coil is enhanced. If the outer diameter is relatively small in relationship, the efficiency is reduced. The efficiency of the coil effects the cycle length, but small diameter tooling requires less shrink fit interference, therefore allowing for minimal adjustments of the machine to operate on most tooling. The normal cycle length for changing tooling is 7 seconds. INUTION HETING UNITS & OPTIONS INUTION HETING UNITS NUMER TI 10/10 N12 TI 10/10 HN12 TI 10/10 N12480 TI 10/10 HN12480 ESRIPTION Vertical unit with 220V/3 phase power requirement with NEM 12 electrical cabinet. Horizontal unit with 220V/3 phase power requirement with NEM 12 electrical cabinet. Vertical unit with 480V transformer with NEM 12 electrical cabinet. Horizontal unit with 480V transformer with NEM 12 electrical cabinet. 11

12 INUTION UNIT riney INUTION MHINE ESSORIES INFRRE SENSOR OPTION The Infrared Sensor Option allows for the most effective use of the Induction Machine in the shrink fit process. With the Infrared Option, the controls of the Induction Unit are overridden by using the desired temperature setting. When the toolholder reaches the desired temperature the machine shuts down automatically. This virtually eliminates improper use of the machine and operator error due to incorrect power and timer settings. Infrared is a practical addition for all shrink fit users. NUMER TIIR ESRIPTION Infrared Sensor For use with all Induction Units. INUTION OILS FOR VERTIL UNITS NUMER TII To change.500 max diameter tool shank TII To change max diameter tool shank TII To change 0 max diameter tool shank ENLOSE INUTION OILS FOR HORIZONTL UNITS NUMER TIEI TIEI TIEI To change.500 max diameter tool shank To change max diameter tool shank 2.12 To change 0 max diameter tool shank HORIZONTL LMPING FIXTURE For clamping of additional toolholder styles on horizontal induction machines. NUMER SHNK SIZE TIHF - V40 TIHF - V45 TIHF - V50 TIHF - T40 TIHF - T50 TIHF - HSK32 TIHF - HSK40 TIHF - HSK50 TIHF - HSK63 TIHF - HSK100 V40 V45 V50 T40 T50 HSK32 HSK40 HSK50 HSK63 HSK One clamping fixture is included with the horizontal machine. 12

13 TI 12/U II riney OOLING EVIES 12-station cooling unit with self contained cooler unit for temperature regulation of the block and interchangeable cooling sleeves. The unit includes 12-TI 1 interchangeable cooling blocks to customize the unit to meet your needs. The 12- station block is designed and supplied with coolant channels throughout the block. Fittings, piping, pump and adjustable cooler unit to regulate the temperature of the coolant and block for rapid cooling of inducted heated tooling. The unit is mounted on a free standing shelving unit with casters for better mobility. The storage shelves hold between 10 and 40 toolholders based on the size of the toolholders. INUTION UNIT TI 24/U III 24-station cooling unit manufactured from aluminum. omes complete with moveable stand with shelves for tooling. Includes 24 TI 1 single cooling blocks to customize the unit to meet the needs of the customers. The 24-station block is designed and supplied with coolant channels throughout the block, fittings, piping and fully contained chiller unit to regulate the temperature of the coolant and block within +/- 2 degrees. The unit is free standing on a shelving unit with casters for easy movement. The storage shelves hold between 10 and 40 toolholders based on the size of the holders. This unit is designed for high volume shrink fit users. OOLING UNITS NUMER TI12/U II TI 24/U III ESRIPTION 12-Station with cooler eluxe ooling Unit 24-Station with hiller TI 1 Single aluminum cooling blocks to dissipate the heat from the toolholder. The interior diameter is tapered to match taper on O.. of toolholder. The toolholder uses conduction to draw the heat from the holder. The cooling blocks can be immersed in water or coolant between tool changes to speed the cooling process. verage cooling times using a cold cooling block is 90 seconds. The cooling blocks can be ordered by specifying the I size of the toolholder that is to be used. WRNING: o not immerse toolholders in water or coolant without cooling first, it could cause distortion or breakage of toolholder due to rapid cooling (quenching) of the steel. OOLING SLEEVES UTTING NUMER TOOL SIZE TI 1-3/ TI 1-1/4.250 TI 1-5/ TI 1-3/8.375 TI 1-7/ TI 1-1/2.500 TI 1-5/8.625 NUMER TI 1-3/4 TI 1-7/8 TI 1-1 TI 1-1 1/4 TI 1-1 1/2 TI 1-2 TI 1-6M UTTING TOOL SIZE MM NUMER TI 1-8M TI 1-10M TI 1-12M TI 1-16M TI 1-20M TI 1-25M TI 1-32M UTTING TOOL SIZE 8MM 10MM 12MM 16MM 20MM 25MM 32MM 13

14 riney SHRINKER TOOLING SHRINKER TOOLING EROSPE UTOMOTIVE GENERL MHINING 14

15 riney T 40 V FLNGE PTERS For coolant thru ore Tooling, see page 32 V FLNGE TOOLING STNR LENGTH NUMER E V40SF V40SF V40SF V40SF V40SF V40SF V40SF V40SF V40SF V40SF METRI STNR LENGTH (mm) NUMER E V40SF-6M V40SF-8M V40SF-10M V40SF-12M V40SF-14M V40SF-16M V40SF-18M V40SF-20M V40SF-32M EXTENE LENGTH NUMER E V40SF V40SF V40SF V40SF V40SF V40SF V40SF V40SF V40SF V40SF

16 riney T 50 V FLNGE PTERS V FLNGE TOOLING For coolant thru ore Tooling, see page 32 STNR LENGTH NUMER E V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF EXTR EXTENE LENGTH NUMER E V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF EXTENE LENGTH NUMER E V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF V50SF METRI STNR LENGTH (mm) NUMER E V50SF-6M V50SF-8M V50SF-10M V50SF-12M V50SF-14M V50SF-16M V50SF-18M V50SF-20M V50SF-25M V50SF-32M

17 riney 40 T FLNGE PTERS For coolant thru ore Tooling, see page 32 T FLNGE TOOLING STNR LENGTH NUMER E T40SF T40SF T40SF T40SF T40SF T40SF T40SF T40SF T40SF EXTENE LENGTH NUMER E T40SF T40SF T40SF T40SF T40SF T40SF T40SF T40SF T40SF

18 riney 50 T FLNGE PTER For coolant thru ore Tooling, see page 32 T FLNGE TOOLING STNR LENGTH NUMER E T50SF T50SF T50SF T50SF T50SF T50SF T50SF T50SF T50SF T50SF EXTENE LENGTH NUMER E T50SF T50SF T50SF T50SF T50SF T50SF T50SF T50SF T50SF T50SF

19 riney HSK32 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STNR LENGTH NUMER E HSK32SF HSK32SF HSK32SF HSK32SF EXTENE LENGTH NUMER E HSK32SF HSK32SF HSK32SF HSK32SF METRI STNR LENGTH (mm) NUMER E HSK32SF-6M HSK32SF-10M HSK32SF-12M

20 riney HSK32 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STNR LENGTH NUMER E HSK32SF HSK32SF HSK32SF HSK32SF EXTENE LENGTH NUMER E HSK32SF HSK32SF HSK32SF HSK32SF METRI STNR LENGTH (mm) NUMER E HSK32SF-6M HSK32SF-8M HSK32SF-10M HSK32SF-12M

21 riney HSK32E IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STNR LENGTH NUMER E HSK32ESF HSK32ESF HSK32ESF HSK32ESF EXTENE LENGTH NUMER E HSK32ESF HSK32ESF HSK32ESF HSK32ESF METRI STNR LENGTH (mm) NUMER E HSK32ESF-6M HSK32ESF-10M HSK32ESF-12M

22 riney HSK63 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF EXTENE LENGTH NUMER E HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF STNR LENGTH NUMER E HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF METRI STNR LENGTH (mm) NUMER E HSK63SF-6M HSK63SF-8M HSK63SF-10M HSK63SF-12M HSK63SF-14M HSK63SF-16M HSK63SF-18M HSK63SF-20M HSK63SF-25M HSK63SF-32M

23 riney HSK63 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF METRI STU LENGTH NUMER E HSK63SF-6M HSK63SF-8M HSK63SF-10M HSK63SF-12M HSK63SF-14M HSK63SF-16M HSK63SF-18M HSK63SF-20M HSK63SF-25M HSK63SF-32M STNR LENGTH NUMER E HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF HSK63SF METRI STNR LENGTH (mm) NUMER E HSK63SF-6M HSK63SF-8M HSK63SF-10M HSK63SF-12M HSK63SF-14M HSK63SF-16M HSK63SF-18M HSK63SF-20M HSK63SF-25M HSK63SF-32M

24 riney HSK63E IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF STNR LENGTH NUMER E HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF EXTENE LENGTH NUMER E HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF HSK63ESF METRI STNR LENGTH (mm) NUMER E HSK63ESF-6M HSK63ESF-10M HSK63ESF-12M HSK63ESF-16M HSK63ESF-20M HSK63ESF-25M

25 riney HSK63SF IN69893 For coolant thru ore Tooling, see page 32 UTOMOTIVE HSK TOOLING STNR LENGTH NUMER E F HSK63SF-6M-80 6MM 80MM 27MM 26MM 36MM M5X0.8LH HSK63SF-8M-80 8MM 80MM 27MM 26MM 36MM M6X1.0LH HSK63SF-10M-85 10MM 85MM 32MM 32MM 42MM M8X1.25LH HSK63SF-12M-90 12MM 90MM 32MM 37MM 47MM M10X1.5LH HSK63SF-14M-90 14MM 90MM 34MM 37MM 47MM M12X1.75LH HSK63SF-16M-95 16MM 95MM 34MM 40MM 50MM M14X2.0LH HSK63SF-18M-95 18MM 95MM 42MM 40MM 50MM M16X2.0LH HSK63SF-20M MM 100MM 42MM 42MM 52MM M18X1.5LH HSK63SF-25M MM 115MM 53MM 48MM 58MM M18X1.5LH HSK63SF-32M MM 120MM 53MM 48MM 58MM M18X1.5LH 25

26 riney HSK100 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF STNR LENGTH NUMER E HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF EXTENE LENGTH NUMER E HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF METRI STNR LENGTH (mm) NUMER E HSK100SF-6M HSK100SF-8M HSK100SF-10M HSK100SF-12M HSK100SF-14M HSK100SF-16M HSK100SF-18M HSK100SF-20M HSK100SF-25M HSK100SF-32M

27 riney HSK100 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF STNR LENGTH NUMER E HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF EXTENE LENGTH NUMER E HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF HSK100SF METRI STNR LENGTH (mm) NUMER E HSK100SF-6M HSK100SF-8M HSK100SF-10M HSK100SF-12M HSK100SF-14M HSK100SF-16M HSK100SF-18M HSK100SF-20M HSK100SF-25M HSK100SF-32M

28 riney EPTH SETTING UNITS Use our depth setting unit to preset the projection of the cutting tool. Select the proper unit for the tool to be pre-set: EPTH SETTING UNITS to JUSTLE EPTH SETTING UNITS 28 NUMER TISU TISU TISU TISU TISU TISU TISU TISU TO JUSTLE EPTH SETTING UNITS NUMER TISU TISU TISU TISU TISU TISU TISU TISU METRI NUMER TISU-6M 6mm TISU-10M 10mm TISU-12M 12mm TISU-16M 16mm TISU-20M 20mm TISU-25M 25mm TISU-32M 32mm TO JUSTLE EPTH SETTING UNITS NUMER TISU4-6M 6mm TISU4-10M 10mm TISU4-12M 12mm TISU4-16M 16mm TISU4-20M 20mm TISU4-25M 25mm TISU4-32M 32mm ) Place locking ring over cutting tool to approximate depth. 2.) Insert the cutting tool in to depth setting unit. 3.) djust the micrometer to the projection length desired. 4.) Hold locking ring in place against setting unit and clamp in place using lock screw. Remove depth setting unit. 5.) Select proper toolholder and cycle Induction Unit to expand bore. 6.) Insert cutting tool shank into heat expanded toolholder. 7.) When the toolholder cools and the shank is clamped remove locking ring. 8.) llow toolholder to cool in cooling unit or cooling block. 9.) Tool and holder are ready for use. ll Shrinker toolholders are qualified from the gage line or flange shoulder to the end of the holder to within +/ The locking collars are precision ground to / y controlling the projection from the face of the holder, tools can be preset to.001 or less. If required, the toolholders can be qualified to closer tolerance and presetting to +/ or less can be achieved. Shrinker toolholders are being used extensively on multiple spindle machines using this method of presetting. dditional locking rings are available on page 29.

29 riney LOKING RINGS Select the proper locking ring to clamp onto the cutting tool and control the projection of the tool. 1.) Place the locking ring over the cutting tool, adjust to the proper depth and clamp in place using the locking screw. 2.) Insert the Tool Shank into the heat expanded bore of the toolholder. 3.) When the Tool holder cools and the shank is clamped, remove the locking ring. 4.) Tool and Toolholder are ready for use. LOKING RINGS NUMER TILR TILR TILR TILR TILR TILR TILR TILR METRI LOKING RINGS NUMER TILR-6M 6mm TILR-8M 8mm TILR-10M 10mm TILR-12M 12mm TILR-14M 14mm TILR-16M 16mm TILR-20M 20mm TILR-25M 25mm TILR-32M 32mm LOKING RINGS MIROMETER HE NUMER TIMH TIMH Micrometer heads are for use with depth setting units on page

30 riney INUTION SPER RINGS SPER RINGS FOR V FLNGE HOLERS NUMER SHNK SIZE EXT. LENGTH ISR-V V ISR-V V ISR-V V ISR-V V ISR-V V ISR-V V FOR HSK SHNK HOLERS NUMER SHNK SIZE EXT. LENGTH ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK ISR-HSK HSK Use our Induction Spacer Rings to eliminate the adjustment of the table height on the Vertical Induction Heating Units. These spacer rings allow for quick change over from standard to extended and extra extended length holders. EXMPLE: set the Induction machine table at the proper height to change a standard length V50SF The 300 designates the projection is from the gage line to the end of the toolholder. If you wish to change a V50SF a 5.00 projection toolholder, you select the ISR-V50-200, ( extension spacer) place the ring on the Induction Machine table and insert the toolholder. The spacer ring will suspend the toolholder at the proper changing height without adjusting the table. 30

31 HSK OOLNT TUES riney HSK OOLNT TUES & INSTLLTION WRENH HSK OOLNT TUES NUMER TPER SIZE TIT-HSK32 HSK M10X1 TIT-HSK40 HSK M12X1 TTIT-HSK50 HSK M16X1 TIT-HSK63 HSK M18X1 TIT-HSK100 HSK M24X1.5 INSTLLTION WRENH NUMER TPER SIZE TIIW-HSK32 HSK TIIW-HSK40 HSK TIIW-HSK50 HSK TIIW-HSK63 HSK TIIW-HSK100 HSK

32 OOLNT ORE TOOLING riney OOLNT THROUGH ORE TOOLING EXMPLE: V40SF riney offers the ultimate in coolant through bore toolholders. y utilizing the shrink fit connection, which creates an air and coolant tight seal, coolant grooves can be added to the bore, to direct coolant down the flutes of the cutting tool, directly onto the cutting edge. Our system eliminates the need for special coolant through tools, sealing accessories or altering the tool shank for coolant delivery. To order coolant through bore tooling, please add a after the SF in the part number. EXMPLE: V40SF Send for your quote today for the best in coolant through tooling. The shrinker toolholding system delivers more gripping strength and machining accuracy than any other toolholder. 32

33 riney PREISION N TOOLHOLING RINEY TOOL HOLERS OLLET HUKS T-FLNGE OLLET HUKS T-FLNGE EN MILL PTERS EN MILL PTERS V-FLNGE HSK NMT V-FLNGE HSK NMT MILL TP RILL REM 33

34 STRT-UP PKGES V 40 & T 40 FLNGE MHINE STRT-UP PKGE * PLESE SPEIFY V 40 or T 40 Flange Tooling riney These items are a suggested package of toolholders to allow you to perform the various machining operations on your new N mill. QUNTITY ORERE QUNTITY REOMMENE ESRIPTION / NUMER 3/8 EN MILL PTER 1/2 EN MILL PTER 5/8 EN MILL PTER 3/4 EN MILL PTER 1" EN MILL PTER 1-1/4 EN MILL PTER 4 OLLET HUK PTER 3/32-1" RNGE 1 SET TG TG100-HW 1 1 SHELL MILL PTER SHELL MILL PTER #33 JOS TPER PTER #6 JOS TPER PTER 1 1 #9682 # #2 MORSE TPER PTER #3 MORSE TPER PTER #4 MORSE TPER PTER 2 TP HOLERS NOTE: THE OVE ITEMS O NOT INLUE RETENTION KNOS. PLESE INFORM RINEY OF THE MKE & MOEL OF YOUR MHINE, N WE WILL QUOTE THE PROPER KNOS. 34

35 riney * PLESE SPEIFY V 50 or T 50 Flange Tooling V 50 & T 50 FLNGE MHINE STRT-UP PKGE STRT-UP PKGES These items are a suggested package of toolholders to allow you to perform the various machining operations on your new N mill. QUNTITY ORERE QUNTITY REOMMENE ESRIPTION / NUMER 3/8 EN MILL PTER 1/2 EN MILL PTER 5/8 EN MILL PTER 3/4 EN MILL PTER 1" EN MILL PTER 1-1/4 EN MILL PTER 1-1/2 EN MILL PTER 2" EN MILL PTER OLLET HUK PTER 3/32-1 RNGE 1 SET TG TG100-HW SHELL MILL PTER SHELL MILL PTER 1.25 SHELL MILL PTER #33 JOS TPER PTER #6 JOS TPER PTER 1 1 #9682 # #3 MORSE TPER PTER #4 MORSE TPER PTER 2 #1 SIZE TP HOLERS 1 #2 SIZE TP HOLERS NOTE: THE OVE ITEMS O NOT INLUE RETENTION KNOS. PLESE INFORM RINEY OF THE MKE & MOEL OF YOUR MHINE N WE WILL QUOTE THE PROPER KNOS. 35

36 RINEY EENTRI ORE TOOLHOLERS riney EENTRI ORE TOOLHOLERS riney Eccentric ore Tooling, an innovative, proven end mill holder design dramatically reduces total indicator runout (TIR) typical of all end mill holders using a set screw or Weldon flat set screw. Improving the out-of-concentric condition of the tool holder bore from.0008 to.0002, the riney holders feature an eccentric bore, imparting.0003 eccentricity in the direction of the set screw. For example, a standard 1 tool holder bore diameter is 01, and the end mill for that holder is.9997 ; the clearance between the diameters is With the riney.0003 eccentric bore, as the set screw is tightened, the clearance is pushed to within.0001 of center, while the standard holder maintains the.0004 clearance and the clearances are pushed.0004 off-center. So, when a set screw is turned down in the standard holder and the tool is rotated 180 degrees, the total runout is Eccentric ore Toolholders are available in these styles: V40 V50 T40 T50 36

37 riney RINEY EENTRI ORE TOOLHOLERS EENTRI ORE TOOLHOLERS The riney Eccentric ore concept. special grinding technique reduces runout in all riney end mill holders to.0002 from.0008 typical in other holders. With the riney Eccentric ore Tooling, the shallow recess of the.0003 eccentric ground into the bore effectively reduces the potential off-center condition of the tool caused by the application of the set screw, keeping TIR to.0002 when the tool is rotated and properly located, according to the company. patented internal grinding technique reduces bore runout in riney end mill holders after clamping from typical in every other holder to our new standard regradless of size, without affecting other tool holder features and tolerances. ll riney V40, V50, T40 and T 50 holders are ground with bores featuring the offset, improving milling quality and tool and holder life without additional cost to the user. VNTGES INLUE: Less runout means a more even chip load and a lot less chatter Fewer passes to mill slots because of improved on-center rotation, saving time and improving machining quality Twice the tool life you can get with any other end mill holder plus half the tooling replacement expense because tools last longer 37

38 OOLNT THRU FE TOOLING riney TF & TRU-VELOIYTY EN MILL PTERS riney builds coolant through the face (TF) holders. TF holders are sometimes referred to as IN holders. IN Form calls for metric retention knob threads and an orientation notch. IN also calls for a larger safety diameter than TF holders. TF holders are used primarily in Mori Seiki machining centers to accommodate through the face coolant routing. NOTE! To order coolent thru face tooling specify with an TF after part number. Example: V40E TF or see back page of book for details. HIGH SPEE LNE TOOLING RINEY offers a choice to match your high speed needs: Tru Velocity and Maximum Velocity alanced Tooling TRU VELOITY alanced Tooling Static or dynamic balanced for speeds up to 20,000 RPM. Recommended for all machines over 5,000 RPM and up to 20,000 RPM. oncentric.0002 shank-to-bore. N precision traverse ground to T3 Taper Quality. enefits: Extended tool life. Faster speeds and feed rates. Increased accuracy and repeatability. Superior surface finish. 38 TI Model TH-25 ynamic alancing Machine MXIMUM VELOITY ynamic alanced Tooling ynamically balanced for speeds up to 30,000 RPM. oncentric.0002 shank-to-bore. N precision traverse ground to T3 Taper Quality. Recommended for machines 20,000 RPM to 30,000 RPM spindle speed. enefits: Extended tool life. Optimum speeds and feed rates. Increased accuracy and repeatability. Eliminates vibration and chatter. Increases productivity. ost savings (tooling and machine time).

39 riney LNE TOOLING Understanding Unbalance Tolerance The merican National Standards Institute for alance Quality of Rigid Rotating odies NSI S , defines permissible residual unbalance for a rotating body relative to its maximum service speed. Machine builders follow this specification in manufacturing spindles used in today s machining centers. alance quality specifications for spindles is G 2.5mm/sec. However, the typical at V Flange tool has 250 gr/mm unbalance due to the unequaled drive slots in the original design. To correct for this design unbalance, all riney tooling is manufactured with an altered standard drive slot to properly equalize the weight. This change in tool design enables the ynamically alanced riney Tru Velocity tools to meet the G 2.5 tolerance of machine spindles. Tru Velocity tools can run up to 20,000 RPM without putting undue stress on the machine spindle. In developing the formulas for unbalance, spindle speed is the primary factor in determining the balance tolerance. For machines with spindle speeds that exceed 20,000 RPM, the amount of unbalance allowed to meet the G 2.5 specification is greatly reduced. TF & TRU-VELOIYTY Projected Tool Life GOO VG POOR Maximum Velocity Holder Tru Velocity Holder Standard Unbalanced Holder 5,000 10,000 15,000 20,000 30,000 Tests based on 3lb. Toolholder bove 30,000 RPM riney recommends the adapter be custom-manufactured for each tool and operation to ensure proper balance and safety. To meet this stricter balance specification, riney offers Maximum Velocity tooling. Maximum Velocity tools are manufactured with improved designs, special operations, and improved accessory items. The final step in the process is a complete dynamic balancing operation. Our dynamic balancing machine is a stateof-the-art hard bearing 2-plane balancing system with spindleless drive and highly sensitive electronic measuring system. riney Maximum Velocity tooling is balanced to G 2.5 or better at 30,000 RPM. This specification meets or exceeds the spindle balance specification for all machine tool builders. For spindle speeds over 30,000 RPM, contact riney for a quotation on alanced Engineered tooling. These special tooling requirements will be engineered and manufactured to meet the high speed specification required and then custom balanced with the cutting tools assembled to ensure the correct balance at ultra high speed. 39

40 V 40 FLNGE EN MILL PTERS STU LENGTH NUMER V40E V40E V40E V40E *V40E riney E SET SREW 7/16-20W 9/16-18W 5/8-18W 3/4-16W 3/4-16W EN MILL TYPE SINGLE EN Order retention knobs separately, specify machine make and model #. *annot be used with some automatic tool changers. V FLNGE TOOLING STNR LENGTH SET E F NUMER SREW TYPE V40E V40E V40E V40E V40E V40E V40E V40E V40E V40E V40E V40E V40E V40E W 1/4-28W 1/4-28W 10-32W 3/8-24W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 3/4-16W SINGLE OR OULE EN SINGLE OULE SINGLE EN Order retention knobs separately, specify machine make and model #. INTERMEITE LENGTH NUMER V40E V40E V40E V40E V40E E F SET SREW 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W TYPE SINGLE OR OULE EN Order retention knobs separately, specify machine make and model #. EPTH FOR OULE ENE ENMILLS EXTENE LENGTH NUMER E F SET SREW ENMILL TYPE V40E V40E V40E V40E V40E V40E V40E V40E V40E /4-28W 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W SINGLE OR OULE EN SINGLE EN Order retention knobs separately, specify machine make and model #. 40

41 riney V 40 FLNGE METRI STNR LENGTH SET ENMILL E F NUMER SREW TYPE V40E-6MM-250 V40E-8MM-250 V40E-10MM-250 V40E-12MM-262 V40E-16MM-375 V40E-20MM-375 6MM 8MM 10MM 12MM 16MM 20MM M6 W M8 W M10 W M12 W M16 W M16 W OULE EN Order retention knobs separately, specify machine make and model #. METRI EN MILL PTERS NUMER MORSE TPER MORSE TPER PTERS V FLNGE TOOLING V40-MT V40-MT V40-MT V40-MT Order retention knobs separately, specify machine make and model #. NUMER JOS TPER JOS TPER PTERS V40-JT V40-JT V40-JT V40-JT V40-JT Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and 92. OULE NGLE OLLET HUKS NUMER V V V V V V OLLET SERIES OLLET RNGE Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 87 and 93. NOTE! o not exceed the following torque recommendations: ft/lbs ft/lbs ft/lbs ft/lbs OLLET NUT N-100 N-180 N-180 N-200 N-200 N-300 STOP SREW 5/8-LH 13/16-LH 13/16-LH 7/16-LH 7/16-LH 5/16-LH OLLET NUT WRENH 10W 18W 18W 20W 20W 30W 41

42 V 40 FLNGE riney RINEY FLEX OLLET HUKS NUMER V40F V40F OLLET SERIES F075 F100 OLLET RNGE OLLET NUT FN-75 FN-100 STOP SREW 13/16-LH Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 89 and 95. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: F ft/lbs. F ft/lbs. OLLET WRENH FG75SW FG100SW V FLNGE TOOLING TG OLLET HUKS * NUMER V40H V40H V40H V40H V40H V40H OLLET SERIES TG075 TG100 TG100 TG100 TG100 TG150 OLLET RNGE OLLET NUT WRENH Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. TG ft/lbs. TG ft/lbs. *No Safety iameter OLLET NUT TGN-075 TGN-100 TGN-100 TGN-100 TGN-100 TGN-150 STOP SREW 13/16-LH 1-1/8-LH 1-1/8-LH 1-1/8-LH 1-5/8-LH TG075HW TG100HW TG100HW TG100HW TG100HW TG150SW ULTR PREISION OLLET HUKS NUMER V40R V40R V40R V40R V40R V40R V40R V40R V40R V40R V40R V40R V40R V40R OLLET SERIES R11 R16 R16 R20 R20 R20 R25 R25 R25 R32 R32 R32 R32 R40 OLLET RNGE OMP NUT RN-11M RN-16 RN-16 RN-20 RN-20 RN-20 RN-25 RN-25 RN-25 RN-32 RN-32 RN-32 RN-32 RN-40 STOP SREW 5/16-LH 7/16-LH 7/16-LH 9/16-LH 9/16-LH 9/16-LH M18LH M18LH M18LH 7/8-LH 7/8-LH 7/8-LH 7/8-LH 1-1/8-LH OLLET NUT WRENH R11MW R16HW R16HW R20HW R20HW R20HW R25SW R25SW R25HW R32SW R32SW R32SW R32SW R40SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96, 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R11-25 ft/lbs. R16-40 ft/lbs. R20-65 ft/lbs. R25-65 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. 42

43 riney V 40 FLNGE NUMER THRE ORING HE MFG. FIT ORING HE PTERS V40H V40H V40H V40H /8-18 7/ / RIGEPORT #1 ORING H ERIKSON #37 OR #50 RITERION ORING H RITERION ORING H FLYNN #32, 33, 36, 47, 48, 49, 65, 67, 68 Order retention knobs separately, specify machine make and model #. V FLNGE TOOLING NUMER V V V V V Order retention knobs separately, specify machine make and model #. TPPE HOLE x 1/ x 1/2 1/4-20 x 3/4 1/4-20 x 3/4 1/4-20 x 3/4 MTERIL PHT 4150 LNK RS NUMER V40PT Order retention knobs separately, specify machine make and model #. Test bars are calibrated and certified, bar diameters are concentric to taper within ONENTRIITY PREISION TEST RS 43

44 V 40 FLNGE riney SHELL MILL PTERS STNR LENGTH NUMER V40SM V40SM V40SM V40SM E KEY F G THRE SREW 3/8-24 1/2-20 5/8-18 3/4-16 Order retention knobs separately, specify machine make & model #. Includes shell screw and drive keys V FLNGE TOOLING EXTENE SHELL MILL PTERS EXTENE LENGTH NUMER V40SM V40SM V40SM V40SM E KEY F G THRE SREW 3/8-24 1/2-20 5/8-18 3/4-16 Order retention knobs separately, specify machine make & model #. Includes shell screw and drive keys STU ROR SREW TYPE NUMER V40S V40S V40S SREW THRE 1/2-20 5/8-18 3/4-16 E SPER Order retention knobs separately, specify machine make & model #. Includes 2 spacers, 1/4 and 1/2, key and standard shell screw. dditional spacers available, page 74. F KEY STU ROR NUT TYPE NUMER V40SN V40SN V40SN NUT E KEY F SPER Order retention knobs separately, specify machine make & model #. Includes 3 spacers, 1/8, 3/8, 3/4, key and nut. dditional spacers available on page

45 riney V 45 FLNGE V 45 Flange Toolholders are available upon request in these styles: EN MILL PTERS MORSE TPER PTERS JOS TPER PTERS OULE NGLE OLLET HUKS RINEY FLEX OLLET HUKS TG OLLET HUKS ULTR PREISION OLLET HUKS LNK RS SHELL MILL PTERS V FLNGE TOOLING 45

46 V 50 FLNGE riney EN MILL PTERS V FLNGE TOOLING STU LENGTH NUMER V50E V50E V50E V50E V50E E SET SREW /16-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W ENMILL TYPE SINGLE OR OULE SINGLE EN Order retention knobs separately, specify machine make and model #. STNR LENGTH NUMER V50E V50E V50E V50E V50E V50E V50E V50E V50E V50E V50E V50E V50E V50E E F SET SREW /4-28W 1/4-28W 1/4-28W 3/8-24W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 3/4-16W 1"-14W Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN 46

47 riney V 50 FLNGE EN MILL PTERS EXTENE LENGTH NUMER E F SET SREW V50E /4-28W V50E /4-28W V50E /4-28W V50E /8-24W V50E /8-24W V50E /16-20W V50E /16-18W V50E /8-18W V50E /8-18W V50E /4-16W V50E /4-16W V50E /4-16W V50E "-14W Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN V FLNGE TOOLING EPTH FOR OULE ENE ENMILLS EXTR EXTENE LENGTH NUMER V50E V50E V50E V50E V50E V50E V50E V50E V50E V50E V50E V50E V50E E F SET SREW /4-28W 1/4-28W 1/4-28W 3/8-24W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 1"-14-W Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN 47

48 V 50 FLNGE riney V FLNGE TOOLING METRI EN MILL PTERS MORSE TPER PTERS METRI STNR LENGTH SET ENMILL E F NUMER SREW TYPE V50E-6MM-250 V50E-8MM-250 V50E-10MM-250 V50E-12MM-262 V50E-16MM-375 V50E-20MM-375 V50E-25-MM-400 V50E-32MM-400 6MM 8MM 10MM 12MM 16MM 20MM 25MM 32MM M6 W M8 W M10 W M12 W M16 W M16 W M20 W M20 W OULE EN OULE EN SINGLE EN Order retention knobs separately, specify machine make and model #. NUMER V50-MT2 V50-MT3 V50-MT4 V50-MT5 MORSE TPER Order retention knobs separately, specify machine make and model # JOS TPER PTERS NUMER JOS TPER V50-JT2 V50-JT3 V50-JT4 V50-JT6 V50-JT Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and 92. OULE NGLE OLLET HUKS NUMER V V V V OLLET SERIES OLLET RNGE OLLET NUT N-100 N-100 N-180 N-180 STOP SREW 5/8-LH 5/8-LH 13/16-LH 13/16-LH OLLET NUT WRENH 10W 10W 18W 18W Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 87 and 93. NOTE! o not exceed the following torque recommendations: ft/lbs ft/lbs. 48

49 riney V 50 FLNGE NUMER V50F V50F OLLET SERIES F100 F100 OLLET RNGE Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 89 and 95. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: F ft/lbs OLLET NUT FN-100 FN-100 STOP SREW 1-1/8-LH 1-1/8-LH OLLET NUT WRENH FG100SW FG100SW RINEY FLEX OLLET HUKS NUMER OLLET SERIES OLLET RNGE V50H V50H V50H V50H V50H V50H TG100 TG100 TG100 TG150 TG150 TG TGN-100 TGN-100 TGN-100 TGN-150 TGN-150 TGN /8-LH 1-1/8-LH 1-1/8-LH 1-5/8-LH 1-5/8-LH 1-5/8-LH TG100HW TG100HW TG100HW TG150SW TG150SW TG150SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG ft/lbs. TG ft/lbs. TG ft/lbs. OLLET NUT STOP SREW OLLET NUT WRENH TG OLLET HUKS V FLNGE TOOLING NUMER V50R V50R V50R V50R V50R V50R V50R V50R V50R V50R V50R V50R OLLET OLLET SERIES RNGE R16 R16 R16 R20 R20 R25 R25 R32 R32 R40 R40 R OLLET NUT RN-16 RN-16 RN-16 RN-20 RN-20 RN-25 RN-25 RN-32 RN-32 RN-40 RN-40 RN-50 STOP SREW 7/16-LH 7/16-LH 7/16-LH 9/16-LH 9/16-LH M18LH M18LH 7/8-LH 7/8-LH 1-1/8-LH 1-1/8-LH 1-1/2-LH OLLET NUT WRENH R16HW R16HW R16HW R20HW R20HW R25SW R25SW R32SW R32SW R40SW R40SW R50SW ULTR PREISION OLLET HUKS Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R16-40 ft/lbs. R20-65 ft/lbs. R25-65 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. R50-90 ft/lbs. 49

50 V 50 FLNGE riney ORING HE PTERS NUMER V50H V50H V50H THRE 5/ /2-18 2"-12 ORING HE MFG ERIKSON #37 OR #50 RITERION, SPI & YUS FLYNN SERIES #32, 33, 36, 47, 48, 49, 65, 67, 68 Order retention knobs separately, specify machine make and model #. V FLNGE TOOLING LNK RS NUMER TPPE HOLE MTERIL V V V /4-20 x 3/4 1/4-20 x 3/4 1/4-20 x 3/4 PHT 4150 Order retention knobs separately, specify machine make and model #. PREISION TEST RS NUMER V50PT Order retention knobs separately, specify machine make and model #. Test bars are calibrated and certified, bar diameters are concentric to taper within ONENTRIITY UTOMOTIVE SHNK PTER NUMER V V Order retention knobs separately, specify machine make and model #. 50

51 riney V 50 FLNGE NUMER V50SM / V50SM / V50SM / V50SM / V50SM / V50SM / V50SM / V50SM / V50SM / V50SM / V50SM / V50SM / V50SM " * V50SM " * V50SM " * V50SM " * V50SM " * V50SM " * Order retention knobs separately, specify machine make and model #. Includes shell screw and drive keys. Includes 4 5/8-11 tapped holes on a 4" bolt circle. * E KEY F G THRE SREW SHELL MILL PTERS V FLNGE TOOLING NUMER SREW THRE E SPER F KEY V50S V50S /8-18 3/ Order retention knobs separately, specify machine make and model #. Includes 1/4 and 1/2 spacers, key and shell screw. dditional spacers available, page 74. STU ROR SREW TYPE NUMER V50SN V50SN Order retention knobs separately, specify machine make and model #. Includes 3 spacers, 1/8, 3/8, 3/4, key and nut. dditional spacers available, page 74. NUT E KEY F SPER STU ROR NUT TYPE 51

52 T 30 FLNGE riney EN MILL PTERS NUMER E F SET SREW 1/4-28W 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W T30E T30E T30E T30E T30E T30E T30E T30E Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN T FLNGE TOOLING JOS TPER PTERS NUMER TPER T30-JT2 T30-JT3 T30-JT Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and TG OLLET HUKS NUMER OLLET SERIES OLLET RNGE OLLET NUT STOP OLLET NUT SREW WRENH T30H TG TGN-075 TG075HW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. 52

53 riney T 30 FLNGE NUMER T30R T30R OLLET SERIES R16 R32 OLLET RNGE OLLET NUT RN-16 RN-32 STOP OLLET NUT SREW WRENH 7/16-LH R16HW R32SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R16-40 ft/lbs. R32-80 ft/lbs. ULTR PREISION OLLET HUKS NUMER E KEY F THRE G SREW T30SM T30SM /8-24 1/ Order retention knobs separately, specify machine make and model #. Includes shell screw and drive keys. SHELL MILL PTERS T FLNGE TOOLING T 35 FLNGE T 35 Flange Toolholders are available upon request in these styles: EN MILL PTERS JOS TPER PTERS TG OLLET HUKS ULTR PREISION OLLET HUKS SHELL MILL PTERS 53

54 T 40 FLNGE riney EN MILL PTERS STU LENGTH SET ENMILL E NUMER SREW TYPE T40E /16-20W T40E /16-18W SINGLE T40E /8-18W EN T40E /4-16W T40E /4-16W Order retention knobs separately, specify machine make and model #. T FLNGE TOOLING STNR LENGTH NUMER T40E T40E E F SET SREW 1/4-28W 1/4-28W ENMILL TYPE T40E /4-28W T40E T40E T40E T40E T40E /8-24W 3/8-24W 7/16-20W 9/16-18W 5/8-18W SINGLE OR OULE EN T40E /8-18W T40E /4-16W T40E /4-16W SINGLE T40E /4-16W SINGLE Order retention knobs separately, specify machine make and model #. EXTENE LENGTH NUMER E SET SREW TYPE T40E T40E T40E T40E T40E /8-24W 7/16-20W 9/16-18W 5/8-18W 3/4-16W SINGLE OR OULE EN Order retention knobs separately, specify machine make and model #. 54

55 riney T 40 FLNGE NUMER TPER MORSE TPER PTERS T40-MT T40-MT T40-MT Order retention knobs separately, specify machine make and model # NUMER T40-JT2 T40-JT3 T40-JT4 T40-JT6 T40-JT33 TPER Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and JOS TPER PTERS T FLNGE TOOLING NUMER T T T OLLET SERIES OLLET RNGE OLLET NUT N-100 N-180 N-200 STOP SREW 9/16-LH 13/16-LH 7/16-LH OLLET NUT WRENH 10W 18W 20W Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 87 and 93. NOTE! o not exceed the following torque recommendations: ft/lbs ft/lbs ft/lbs ft/lbs. OULE NGLE OLLET HUKS 55

56 T 40 FLNGE riney RINEY FLEX OLLET HUKS NUMER T40F T40F OLLET SERIES F75 F100 OLLET RNGE.109-3/ OLLET NUT FN-75 FN-100 STOP SREW 13/16-LH 1-1/8-LH OLLET NUT WRENH FG75SW FG100SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 89 and 95. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: F ft/lbs. F ft/lbs. T FLNGE TOOLING TG OLLET HUKS NUMER T40H T40H T40H OLLET OLLET SERIES RNGE TG TG TG OLLET NUT TGN-075 TGN-100 TGN-100 STOP SREW 13/16-LH 1-1/8-LH 1-1/8-LH TG075HW TG100HW TG100HW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG ft/lbs. TG ft/lbs. OLLET NUT WRENH ULTR PREISION OLLET HUKS NUMER T40R T40R T40R T40R T40R T40R T40R T40R OLLET OLLET SERIES RNGE R16 R16 R20 R20 R20 R25 R32 R OLLET NUT RN-16 RN-16 RN-20 RN-20 RN-20 RN-25 RN-32 RN-40 STOP SREW 7/16-LH 7/16-LH 9/16-LH 9/16-LH 9/16-LH M18LH 7/8-LH 1-1/8-LH OLLET NUT WRENH R16HW R16HW R20HW R20HW R20HW R25HW R32SW R40SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R16-40 ft/lbs. R20-65 ft/lbs. R25-65 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. 56

57 riney T 40 FLNGE NUMER T Order retention knobs separately, specify machine make and model #. TPPE HOLE MTERIL x 1/2 PHT 4150 LNK RS NUMER T40PT Order retention knobs separately, specify machine make and model #. Test bars are calibrated and certified, bar diameter is concentric to taper within ONENTRIITY PREISION TEST RS T FLNGE TOOLING NUMER G SREW T40SM / T40SM / T40SM / T40SM / Order retention knobs separately, specify machine make and model #. Includes shell screw and drive keys. E KEY F SHELL MILL PTERS 57

58 T 50 FLNGE riney EN MILL PTERS NUMER E F SET SREW T50E T50E T50E T50E T50E T50E T50E T50E T50E /8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 1-14W Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN T FLNGE TOOLING MORSE TPER PTERS NUMER TPER T50-MT T50-MT T50-MT T50-MT Order retention knobs separately, specify machine make and model #. JOS TPER PTERS NUMER TPER T50-JT T50-JT T50-JT Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and

59 riney T 50 FLNGE NUMER T50H T50H T50H OLLET SERIES TG100 TG100 TG150 OLLET RNGE Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG ft/lbs. TG ft/lbs OLLET NUT TGN-100 TGN-100 TGN-150 STOP SREW 1-1/8-LH 1-1/8-LH 1-5/8-LH OLLET NUT WRENH TG100HW TG100HW TG150SW TG OLLET HUKS NUMER OLLET SERIES OLLET RNGE T50R T50R T50R T50R T50R R16 R20 R32 R40 R RN-16 RN-20 RN-32 RN-40 RN-50 7/16-LH 9/16-LH 7/8-LH 1-1/8-LH 1-1/2-LH R16HW R20HW R32SW R40SW R50SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R16-40 ft/lbs. R20-70 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. R50-90 ft/lbs. OLLET NUT STOP SREW OLLET NUT WRENH ULTR PREISION OLLET HUKS T FLNGE TOOLING NUMER T Order retention knobs separately, specify machine make and model #. TPPE HOLE MTERIL /4-20 x 3/4 PHT 4150 LNK RS 59

60 T 50 FLNGE riney PREISION TEST RS ONENTRIITY NUMER T50PT Order retention knobs separately, specify machine make and model #. Test bars are calibrated and certified, bar diameters are concentric to taper within T FLNGE TOOLING SHELL MILL PTERS NUMER T50SM T50SM T50SM T50SM /8-24 1/2-20 5/8-18 3/ T50SM " * T50SM " Order * retention knobs separately, specify machine make and model #. Includes shell screw and drive key. Includes 4 5/8-11 tapped holes on a 4" bolt circle. * E KEY F G THRE SREW 60

61 riney NMT Q 30 SHNK NUMER E F SET SREWS EN MILL TYPE EN MILL PTERS NMT30E NMT30E NMT30E /4-28W 1/4-28W 3/8-24W SINGLE OR OULE EN NMT30E NMT30E NMT30E /16-20W 9/16-18W 5/8-18W SINGLE EN ONLY NMT30E NMT30E /4-16W 3/4-16W SINGLE EN ONLY Our Qualified Flange will fit Erickson Tool hange System. NUMER NMT30-JT2 NMT30-JT3 JOS TPER JOS TPER PTERS NMT Q TOOLING NMT30-JT Our Qualified Flange will fit Erickson Tool hange System. rill chucks sold separately, pages 91 and 92. NUMER NMT NMT NMT OLLET SERIES OLLET RNGE Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 87 and 93. Our Qualified Flange will fit Erickson Tool hange System. NOTE! o not exceed the following torque recommendations: ft/lbs ft/lbs ft/lbs OLLET NUT N180 N200 N300 STOP SREW 13/16-LH 7/16-LH 5/16-LH OLLET NUT WRENH 18W 20W 30W OULE NGLE OLLET HUKS 61

62 NMT Q 30 SHNK riney TG OLLET HUKS OLLET OLLET OLLET STOP OLLET NUT NUMER SERIES RNGE NUT SREW WRENH NMT30H TG TGN /16-LH TG075HW Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94 NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. Our Qualified Flange will fit Erickson Tool hange System. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. NMT Q TOOLING SHELL MILL PTERS NUMER NMT30SM NMT30SM NMT30SM Includes shell screw and drive keys. Our Qualified Flange will fit EricksonTool hange System. E KEY F THRE 3/8-24 1/2-20 5/8-18 G SREW

63 riney NMT Q 40 SHNK NUMER E F SET SREW EN MILL TYPE EN MILL PTERS NMT40E NMT40E NMT40E NMT40E NMT40E NMT40E NMT40E NMT40E NMT40E /4-28W 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W SINGLE OR OULE EN SINGLE EN Our Qualified Flange will fit Erickson Tool hange System. NUMER NMT40-MT2 NMT40-MT3 NMT40-MT4 MORSE TPER Our Qualified Flange will fit Erickson Tool hange System MORSE TPER PTERS NMT Q TOOLING NUMER NMT40-JT2 NMT40-JT3 NMT40-JT4 NMT40-JT6 NMT40-JT33 JOS TPER Our Qualified Flange will fit Erickson Tool hange System. rill chucks sold separately, pages 91 and 92. JOS TPER PTERS 63

64 NMT Q 40 SHNK riney TG OLLET HUKS NUMER OLLET SERIES OLLET RNGE OLLET NUT STOP SREW OLLET NUT WRENH NMT40H TG TGN /16-LH TG075HW NMT40H TG TGN /8-LH TG100HW Includes collet nut and standard stop screw. Purchase collets separately, pages 88 and 94. Our Qualified Flange will fit Erickson Tool hange System. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. TG ft/lbs. TG ft/lbs. NMT Q TOOLING SHELL MILL PTERS NUMER E KEY F G THRE SREW NMT40SM / NMT40SM / NMT40SM / NMT40SM / Includes shell screw and drive keys. Our Qualified Flange will fit Erickson Tool hange System. 64

65 riney NMT Q 50 SHNK NUMER E F SET SREW EN MILL TYPE EN MILL PTERS NMT50E NMT50E NMT50E NMT50E NMT50E NMT50E NMT50E NMT50E /8-24W 7/16-20W 9/16-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 1"-14W SINGLE OR OULE EN SINGLE EN Our Qualified Flange will fit Erickson Tool hange System. NUMER TPER NMT50-MT2 NMT50-MT3 NMT50-MT4 NMT50-MT Our Qualified Flange will fit Erickson Tool hange System. MORSE TPER PTERS NMT Q TOOLING NUMER NMT50-JT2 NMT50-JT3 NMT50-JT4 NMT50-JT6 NMT50-JT33 TPER Our Qualified Flange will fit Erickson Tool hange System. rill chucks sold separately, pages 91 and 92. JOS TPER PTERS 65

66 NMT Q 50 SHNK riney TG OLLET HUKS NUMER OLLET SERIES OLLET RNGE NMT50H TG TGN /8-LH TG100HW OLLET NUT STOP SREW Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. Our Qualified Flange will fit Erickson Tool hange System. NOTE! o not exceed the following torque recommendations: TG ft/lbs. TG ft/lbs. OLLET NUT WRENH NMT Q TOOLING SHELL MILL PTERS * * NUMER NMT50SM NMT50SM NMT50SM NMT50SM NMT50SM NMT50SM Includes shell screw and drive keys. Our Qualified Flange will fit Erickson Tool hange System. Includes 4 5/8-11 tapped holes on a 4" bolt circle. * E KEY F G THRE SREW 3/8-24 1/2-20 5/8-18 3/4-16 1"-14 1"

67 riney HSK THE HSK ONNETION The HSK connection is the internationally recognized standard for superior high speed toolholder performance. riney offers the premium toolholder with superior materials and processes. These improvements provide extended wear, superior durability, increased rigidity and dependability. HSK The HSK connection utilizes the combination of face contact and improved taper contact to provide users with: Increased stiffness: 5-7 times higher than steep tapers. Repeatability: Taper and face contact increase positioning accuracy thus reducing run out. Superior High Speed Performance: The short taper and hollow shank design results in a reduction in the holder weight, therefore reducing spindle stresses. Interior taper clamping reduces the effects that centrifical forces generates, at higher speeds. High Torque Transmission: The combination of face contact and taper contact create improved friction. This in conjunction with positive drive key design improve torque transfer under heavy cutting loads. Since its introduction in 1993, HSK has proven to be the new world standard for high speed toolholding. riney combines the HSK connection with improved materials and processes to provide the highest quality HSK toolholders in the industry. 67

68 HSK SHNK IN riney FORM For utomatic Tool hange FORM For utomatic Tool hange With dditional Face ontact nd oolant Through Face FORM Manual lamping FORM Manual dditional Face ontact nd oolant Through Face HSK FORM E For Ultra High Speed pplication FORM //E FORM F Ultra High Speed With dditional Face ontact FORM //F 1 2 L1 1 2 L1 32 (1.2598) 24 (.945) 16 (.630) (1.5748) 30 (1.181) 20 (.787) 40 (1.5748) 24 (.945) 16 (.630) 50 (1.9685) 38 (1.496) 25 (.984) 50 (1.9685) 30 (1.181) 20 (.787) 63 (2.4803) 48 (1.890) 32 (1.260) 63 (2.4803) 38 (1.496) 25 (.984) 80 (3.1496) 60 (2.362) 40 (1.575) 80 (3.1496) 48 (1.890) 32 (1.260) 100 (3.9370) 75 (2.953) 50 (1.969) 100 (3.9370) 60 (2.362) 40 (1.575) 125 (4.9213) 95 (3.740) 63 (2.480) 125 (4.9213) 75 (2.953) 50 (1.969) 160 (6.2992) 120 (4.724) 80 (3.150) 160 (6.2992) 95 (3.740) 63 (2.480) 68

69 riney HSK SHNK IN riney offers HSK tooling from stock in sizes 63 and 100. hoose riney HSK for maximum rigidity in high speed machining. It s the pinnacle of toolholder stiffness, concentricity and consistent position accuracy. Select the size and style you need from HSK32 thru HSK125 sizes and styles thru E. From stock or manufactured to order. HSK EN MILL PTERS NUMER SHNK SIZE SET SREW HSK63E HSK63E HSK63E HSK63E HSK63E HSK63E HSK63E HSK63E /4-28W 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 3/4-16W 3/4-16W HSK100E /8-24W HSK100E /16-20W HSK100E /16-18W HSK100E /8-18W HSK100E /4-16W HSK100E /4-16W HSK100E /4-16W Order coolant tubes separately, page

70 HSK SHNK IN riney HSK OLLET HUK PTERS NUMER SHNK SIZE OLLET RNGE IN./MM OLLET SERIES IN./MM OLLET STOP NUT SREW OLLET NUT WRENH HSK63R-16-65m HSK /.5-10 R16 28mm 2.559/65 51mm RN16 7/16 LH R16HW HSK63R m HSK /.5-10 R16 28mm 3.937/100 51mm RN16 7/16 LH R16HW HSK63R m HSK /.5-10 R16 28mm 4.724/120 51mm RN16 7/16 LH R16HW HSK63R m HSK /.5-10 R16 28mm 6.299/160 51mm RN16 7/16 LH R16HW HSK63R-20-70m HSK /1-13 R20 34mm 6/70 55mm RN20 9/16 LH R20HW HSK63R m HSK /1-13 R20 34mm 3.937/100 55mm RN20 9/16 LH R20HW HSK63R m HSK /1-13 R20 34mm 4.724/120 55mm RN20 9/16 LH R20HW HSK63R m HSK /1-13 R20 34mm 6.693/170 55mm RN20 9/16 LH R20HW HSK63R-25-80m HSK /1-16 R25 42mm 3.150/80 60mm RN25 M18 LH R25SW HSK63R m HSK /1-16 R25 42mm 4.724/120 60mm RN25 M18 LH R25SW HSK63R m HSK /1-16 R25 42mm 6.889/175 60mm RN25 M18 LH R25SW HSK63R-32-80m HSK /2-20 R32 50mm 3.937/ mm RN32 7/8 LH R32SW HSK63R m HSK /2-20 R32 50mm 3.937/ mm RN32 7/8 LH R32SW HSK63R m HSK /2-20 R32 50mm 5.118/ mm RN32 7/8 LH R32SW HSK63R m HSK /2-20 R32 50mm 7.087/ mm RN32 7/8 LH R32SW HSK63R m HSK /3-26 R40 63mm 3.937/100 70mm RN40 1-1/8 LH R32SW HSK63R m HSK /3-26 R40 63mm 6.299/160 70mm RN40 1-1/8 LH R32SW HSK100R HSK /.5-10 R16 28mm 3.937/100 51mm RN16 7/16 LH R16HW HSK100R HSK /2-20 R32 50mm 3.937/100 51mm RN32 7/8 LH R32SW HSK100R HSK /3-26 R40 63mm 4.724/ mm RN40 1-1/8 LH R40SW Purchase collets and wrenches separately, pages 90, 96 and 97. Order coolant tubes separately, page 71. SHELL MILL PTERS NUMER HSK63SM HSK / HSK63SM HSK63SM HSK100SM HSK100SM HSK100SM HSK100SM HSK63 HSK63 HSK100 HSK100 HSK100 HSK /2-20 5/8-18 3/8-24 1/2-20 5/8-18 3/ SHNK SIZE Order coolant tubes separately, page 71. E KEY F THRE G SREW

71 riney HSK SHNK IN NUMER TPER SIZE TIT-HSK32 TIT-HSK40 TIT-HSK50 TIT-HSK63 TIT-HSK100 HSK32 HSK40 HSK50 HSK63 HSK M10X1 M12X1 M16X1 M18X1 M24X1.5 HSK OOLNT TUES HSK NUMER TIIW-HSK32 TPER SIZE HSK HSK OOLNT TUE WRENHES TIIW-HSK40 HSK TIIW-HSK50 HSK TIIW-HSK63 HSK TIIW-HSK100 HSK

72 ESSORIES TIGHTENING FIXTURES riney TIGHTENING FIXTURE (LL TPERS) NUMER SHNK SIZE KEY 30TF 35TF 40TF 45TF 50TF 60TF ll tightening fixtures fit V flange, T shank and NMT tooling. olt down or use in vise. ESSORIES LOKING TIGHTENING FIXTURE NUMER SHNK SIZE 40LTF 50LTF FOR V FLNGE PTERS ONLY For use in any position, to access tool or retention knob. 72

73 riney ESSORIES NUMER E /4-28 3/8-24 1/2-20 5/8-18 3/ /16 1/4 5/16 5/16 3/8 1/2 1/2 SHELL MILL SREWS NUMER K-250 K-312 K-375 K-500 K-625 K-750 K- K PTER PILOT SIZE SHELL MILL RIVE KEYS ESSORIES NUMER 10-32W THRE SIZE LENGTH.25 EN MILL SET SREWS (WELON FORGE) 1/4-28W 1/ /8-24W 3/ /16-20W 7/ /16-18W 9/ /8-18W 5/ /4-16W 3/ W

74 ESSORIES riney STOP SREWS NUMER THRE SIZE 5/16LH 5/16-24LH 7/16LH 7/16-20LH 9/16LH 9/16-18LH 5/8LH 5/8-18LH 13/16LH 13/16-16LH 7/8LH 7/8-14LH 1-1/8LH 1-1/8-16LH 1-1/2LH 1-1/2-12LH 1-5/8LH 1-5/8-12LH Stop screws have coolant thru holes STU ROR NUTS NUMER THRE / /2-12 ESSORIES STU ROR & STU ROR NUT SPER SETS NUMER Set incl. 1 ea. 1/8-3/8-3/4 1/8-3/8-3/4 1/8-3/8-3/4 1/4-1/2 1/4-1/2 1/4-1/2 74

75 riney TOOL STORGE MOULR TOOL STORGE SYSTEMS TOOL RTS NUMER *TK-35/40 *TK-45/50 *TK-200 ESRIPTION Tool storage cart Tool storage cart Tool storage cart PITY Holds 54 T35, T40, or V40 shank tools Holds 42 T45, T50, V45, or V50 shank tools Holds 96 QS200 shank tools * Includes your choice of 3 shelves for tooling, collets, or flat shelves. Please specify when ordering. Exact collet shelves must be specified to ensure correct diameter of holes in shelf. TOOL SHELVES NUMER TS-FS TS-32/75S TS-40/100S TS-150S TS-35/40 TS-200 TS-45/50 TS-S TS-#1T TS-#2T ESRIPTION Flat shelf ollet shelf ollet shelf ollet shelf Tooling shelf Tooling shelf Tooling shelf eep shelf Tap collet tray Tap collet tray PITY Flat storage shelf Holds 32 ER32 or TG75 collets Holds 32 ER40 or TG100 collets Holds 18 TG150 collets Holds 18 T35, T40, or V40 shank tools Holds 32 QS200 shank tools Holds 10 T40 or T50 shank tools eep storage shelf with mat Holds 32 #1 series tap adapters Holds 32 #2 series tap adapters TS-FS TS-45/50 ESSORIES TS-32/75S TS-40/100S TS-200 TS-S TS-35/40 TS-150S riney Modular Tool Storage Systems, is the superior choice for all styles of tool shanks. This heavy-duty steel framed mobile kart can be customized to fit your needs. Just choose 3 shelf styles, included in your purchase and add additional shelves now or at a later date. imensions 24" x 24" x 45" HT 75

76 SPINLEMTE riney SPINLEMTE LENER KIT ESRIPTION NUMER 30-Spindle 30 Taper 3.50 T.P.F. 35-Spindle 35 Taper 3.50 T.P.F. 40-Spindle 40 Taper 3.50 T.P.F. 45-Spindle 45 Taper 3.50 T.P.F. 50-Spindle 50 Taper 3.50 T.P.F. 200-Spindle Q Switch 200 Taper T.P.F. omplete with one set of standard, varnish and polish blades. (Will not work in some Quick hange Spindles due to raw ar will not retract). SPINLEMTE LE KITS NUMER SPINLE 30-ST 35-ST 40-ST 45-ST 50-ST 200-ST 3 lade/set 30-VR 35-VR 40-VR 45-VR 50-VR 200-VR 3 lade/set 30-EP 35-EP 40-EP 45-EP 50-EP 200-EP 6 lade/set ESSORIES OLLET SPINLEMTE LENER KIT ESRIPTION NUMER TG075-ollet TG75 ollet Taper TG100-ollet TG100 ollet Taper TG150-ollet TG150 ollet Taper R16-ollet ER16 ollet Taper R20-ollet ER20 ollet Taper R25-ollet ER25 ollet Taper R32-ollet ER32 ollet Taper omplete with one set of standard, varnish and polish blades. OLLET SPINLEMTE LE KITS NUMER OLLET SERIES TG075-ST TG100-ST TG150-ST R16-ST R20-ST R25-ST R32-ST 3 lade/set TG075-VR TG100-VR TG150-VR R16-VR R20-VR R25-VR R32-VR 3 lade/set TG075-EP TG100-EP TG150-EP R16-EP R20-EP R25-EP R32-EP 6 lade/set TG75 TG100 TG150 R16 R20 R25 R32 76

77 riney TPPING PROUTS TPPING PROUTS Through riney Tool Holding, you can order any of the leading brand or type of tapping products you need. oth rigid and tension/compression systems are available off-the-shelf for quick delivery at competitive prices. riney TPPING 77

78 QUIK HNGE TPPING SYSTEM T/ riney V FLNGE TP HOLERS NUMER WFLK1-V40 WFLK2-V40 WFLK1-V50 WFLK2-V50 WFLK3-V50 HUK SIZE #1 #2 #1 #2 #3 SHNK V40 V40 V50 V50 V50 TP SIZE RNGE 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. TENSION OMP- RESSION T FLNGE TP HOLERS NUMER WFLK1-T30 WFLK1-T40 WFLK2-T40 WFLK1-T50 WFLK2-T50 WFLK3-T50 HUK TP SIZE SIZE SHNK RNGE #1 #1 #2 #1 #2 #3 T30 T40 T40 T50 T50 T50 0-9/16 hand,1/8 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. TENSION OMP- RESSION ILZ TPPING NMT FLNGE TP HOLERS HUK TP SIZE TENSION OMP- NUMER SIZE SHNK RNGE RESSION WFLK1-NMT40 #1 NMT40 0-9/16 hand,1/8-1/4 pipe WFLK2-NMT40 #2 NMT40 5/16-7/8 hand,1/4-1/2 pipe WFLK1-NMT50 #1 NMT50 0-9/16 hand, 1/8-1/4 pipe WFLK2-NMT50 #2 NMT50 5/16-7/8 hand,1/4-1/2 pipe WFLK3-NMT50 #3 NMT50 13/16-1-3/8 hand,3/4-1" pipe NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. STRIGHT SHNK TP HOLERS NUMER WFLK1-1"SS HUK SIZE #1 SHNK TP SIZE RNGE 0-9/16 hand,1/8 pipe TENSION.300 OMP- RESSION.300 WFLK2-1"SS #2 5/16-7/8 hand,1/4-1/2 pipe WFLK3-1.50"SS # /16-1-3/8 hand,3/4-1" pipe NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page Tapping Head Holders available for all shank sizes on page 84.

79 riney RIGI QUIK HNGE TPPING SYSTEM NUMER HUK SIZE SHNK TP SIZE RNGE V FLNGE TP HOLERS WF1-V40 WF2-V40 WF1-V50 WF2-V50 WF3-V50 #1 #2 #1 #2 #3 V40 V40 V50 V50 V50 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. NUMER HUK SIZE SHNK TP SIZE RNGE T FLNGE TP HOLERS WF1-T30 WF1-T40 WF2-T40 WF1-T50 WF2-T50 WF3-T50 #1 #1 #2 #1 #2 #3 T30 T40 T40 T50 T50 T50 0-9/16 hand,1/8 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. NUMER WF1-1"SS WF2-1"SS WF3-1.50"SS HUK SIZE #1 #2 #3 SHNK 1.50 TP SIZE RNGE 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page STRIGHT SHNK TP HOLERS ILZ TPPING Tapping Head Holders available for all shank sizes on page

80 riney How to Order: Select the positive drive OR torque control style and order by part number. dapter size and holder size must match. Positive rive dapter, for positive depth control. Quick hange, change taps or tap sizes in 2 seconds, by hand, without the aid of any tools. Torque ontrol dapter, with safety clutch, protects against breakage of worn taps and when tap bottoms out. Quick hange, change taps or tap sizes in 2 seconds, by hand, without the aid of any tools. ILZ TPPING 80 NUMER POSITIVE RIVE WE1-6 WE1-8 WE1-10 WE1-12 WE1-1/4 WE1-5/16 WE1-3/8 WE1-7/16 WE1-1/2 WE1-9/16 *WER1-1/8SSPT **WER1-1/8LSPT WE WE2-5/16 WE2-3/8 WE2-7/16 WE2-1/2 WE2-9/16 WE2-5/8 WE2-11/16 WE2-3/4 WE2-13/16 WE2-7/8 WER2-1/4PT WER2-3/8PT WER2-1/2PT WE WE3-13/16 WE3-7/8 WE3-15/16 WE3-1" WE3-1-1/8 WE3-1-1/4 WE3-1-3/8 WER3-3/4PT WER3-1"PT WE TORQUE ONTROL NUMER WES1-6 WES1-8 WES1-10 WES1-12 WES1-1/4 WES1-5/16 WES1-3/8 WES1-7/16 WES1-1/2 WES1-9/16 *WESR1-1/8SSPT **WESR1-1/8LSPT PTER SIZE pc. set WES pc. set # WES2-5/ WES2-3/ WES2-7/ WES2-1/ WES2-9/ WES2-5/ WES2-11/ # WES2-3/ WES2-13/ WES2-7/ WESR2-1/4PT WESR2-3/8PT WESR2-1/2PT 1.37 #1 HUK TP RNGE 0-9/16 HN 1/8 PIPE PTER TP SIZE #0-#6 #8 #10 #12 1/4 5/16 3/8 7/16 1/2 9/16 1/8 S.S. 1/8 L.S. 0-9/16 hand, 2-1/8 pipe 5/16 3/8 7/16 1/2 9/16 5/8 5/16-7/8 11/16 HN 3/4 13/16 7/8 1/4PT 1/4-1/2 3/8PT PIPE 1/2PT 13 pc. set WES pc. set #2 5/16-7/8 hand, 1/4-1/2 pipe 2.42 WES3-13/ / WES3-7/ / WES3-15/ /16 13/ WES3-1" THRU WES3-1-1/ #3 1-1/8 1-3/ WES3-1-1/ /4 HN 2.79 WES3-1-3/ / WESR3-3/4PT /4 & 1" 3/4PT WESR3-1"PT 1.68 PIPE 1PT 9 pc. set WES pc. set #3 13/16-1-3/8 hand, 3/4-1" pipe * ccepts tap shank dia..313 ** ccepts tap shank dia..438 Please order by part number. Tap holders sold separately, pages 81, 82.

81 riney TENSION OMPRESSION TPPING SYSTEM RINEY QUIK HNGE TPPING SYSTEM NUMER HUK SIZE SHNK TP SIZE RNGE T1-V40 T2-V40 T1-V50 T2-V50 T3-V50 #1 #2 #1 #2 #3 V40 V40 V50 V50 V50 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. TENSION OMP- RESSION V FLNGE TP HOLERS NUMER T1-T30 T1-T40 T2-T40 T1-T50 T2-T50 T3-T50 HUK SIZE #1 #1 #2 #1 #2 #3 SHNK T30 T40 T40 T50 T50 T50 TP SIZE RNGE 0-9/16 hand,1/8 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe TENSION OMP- RESSION NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page T FLNGE TP HOLERS NUMER HUK SIZE SHNK TP SIZE RNGE T1-NMT40 #1 NMT40 0-9/16 hand,1/8-1/4 pipe T2-NMT40 #2 NMT40 5/16-7/8 hand, 1/4-1/2 pipe T1-NMT50 T2-NMT50 T3-NMT50 #1 #2 #3 NMT50 NMT50 NMT50 0-9/16 hand, 1/8-1/4 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. TENSION OMP- RESSION NMT FLNGE TP HOLERS RINEY TPPING HUK TP SIZE TENSION OMP- NUMER SIZE SHNK RNGE RESSION T1-1"SS T2-1"SS T3-1.50"SS #1 #2 # /16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. STRIGHT SHNK TP HOLERS Tapping Head Holders available for all shank sizes on page

82 RIGI/SYNHRONIZE QUIK HNGE TPPING SYSTEM riney V FLNGE TP HOLERS NUMER HUK SIZE SHNK TP SIZE RNGE RT1-V40 RT2-V40 RT1-V50 RT2-V50 RT3-V50 #1 #2 #1 #2 #3 V40 V40 V50 V50 V50 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. T FLNGE TP HOLERS NUMER HUK SIZE SHNK TP SIZE RNGE RT1-T30 RT1-T40 RT2-T40 RT1-T50 RT2-T50 RT3-T50 #1 #1 #2 #1 #2 #3 T30 T40 T40 T50 T50 T50 0-9/16 hand,1/8 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. RINEY TPPING STRIGHT SHNK TP HOLERS NUMER HUK SIZE SHNK TP SIZE RNGE RT1-1"SS RT2-1"SS RT3-150" SS #1 #2 # /16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. Tapping Head Holders available for all shank sizes on page

83 riney RINEY TP PTERS How to Order: Select the positive drive OR torque control style and order by part number. dapter size and holder size must match. Positive rive dapter, for positive depth control. Quick hange, change taps or tap sizes in 2 seconds, by hand, without the aid of any tools. Torque ontrol dapter, with safety clutch, protects against breakage of worn taps and when tap bottoms out. Quick hange, change taps or tap sizes in 2 seconds, by hand, without the aid of any tools. POSITIVE RIVE TORQUE ONTROL NUMER NUMER WE1-6 WE1-8 WE1-10 WE1-12 WE1-1/4 WE1-5/16 WE1-3/8 WE1-7/16 WE1-1/2 WE1-9/16 WER1-1/8SSPT* WER1-1/8LSPT** WE WE2-5/16 WE2-3/8 WE2-7/16 WE2-1/2 WE2-9/16 WE2-5/8 WE2-11/16 WE2-3/4 WE2-13/16 WE2-7/8 WER2-1/4PT WER2-3/8PT WER2-1/2PT WE WE3-13/16 WE3-7/8 WE3-15/16 WE3-1" WE3-1-1/8 WE3-1-1/4 WE3-1-3/8 WER3-3/4PT WER3-1"PT WE WES1-6 WES1-8 WES1-10 WES1-12 WES1-1/4 WES1-5/16 WES1-3/8 WES1-7/16 WES1-1/2 WES1-9/16 WESR1-1/8SSPT* WESR1-1/8LSPT** pc. set WES pc. set # WES2-5/ WES2-3/ WES2-7/ WES2-1/ WES2-9/ WES2-5/ WES2-11/ # WES2-3/ WES2-13/ WES2-7/ WESR2-1/4PT WESR2-3/8PT WESR2-1/2PT pc. set WES pc. set PTER SIZE #1 #3 HUK TP RNGE 0-9/16 HN 1/8 PIPE PTER TP SIZE #0-#6 #8 #10 #12 1/4 5/16 3/8 7/16 1/2 9/16 1/8 S.S. 1/8 L.S. 0-9/16 hand, 2-1/8 pipe 5/16 3/8 7/16 1/2 9/16 5/16-7/8 5/8 HN 11/16 3/4 13/16 7/8 1/4-1/2 1/4PT PIPE 3/8PT 1/2PT 5/16-7/8 hand, 1/4-1/2 pipe 13/16 7/8 13/16 15/16 THRU 1 1-3/8 1-1/8 HN 1-1/4 1-3/8 3/4 & 1" 3/4PT PIPE 1PT 9 pc. set #3 13/16-1-3/8 hand, 3/4-1" pipe * ccepts tap shank dia..313 ** ccepts tap shank dia..438 Please order by part number. Tap holders sold separately, pages 81, 82. #2 RINEY TPPING 83

84 TP HOLER SHNKS riney V FLNGE, T FLNGE, N NMT FLNGE TPPING HE HOLERS V FLNGE NUMER V40-THM-075 V40-THM-100 V50-THM-075 V50-THM-100 V50-THM-150 T30-THM-075 T30-THM-100 T40-THM-075 T40-THM-100 T50-THM-075 T50-THM-100 T50-THM-150 NMT40-THM-100 NMT50-THM-100 NMT50-THM SET SREW 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W SHNK V40 V40 V50 V50 V50 T30 T30 T40 T40 T50 T50 T50 NMT40 NMT50 NMT50 T FLNGE TPPING NMT FLNGE 84

85 85 TPPING T T T T T T T T T T T T PT125S-200 PT125L-200 PT PT PT #0 - #6 #8 #10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1/8 pipe SS 1/8 pipe LS 1/4 pipe 3/8 pipe 1/2 pipe NUMER TP SIZE E TP EXTENSIONS riney

86 86 STRIGHT SHNK NUMER SS050E SS050E SS050E SS050E SS075E SS075E SS075E SS075E SS075E SS125E SS125E SS125E SS125E EN MILL PTERS SHELL MILL PTERS NUMER E F SREW G KEY SS STRIGHT SHNK H SS125SM-075 SS125SM-100 riney

87 riney SS STRIGHT SHNK NUMER SS SS SS SS OLLET RNGE OLLET SERIES STOP SREW 5/16LH 7/16LH 9/16LH 13/16LH OLLET NUT NP-300 NP-200 NP-100 NP-180 WRENH NP30W NP20W NP10W NP18W OULE NGLE OLLET EXTENSIONS Purchase collets separately, page 93. NOTE! o not exceed the following torque recommendations: ft/lbs ft/lbs ft/lbs ft/lbs. NOTE! Nose Piece nut (NP) thread size different from standard nuts (N). NUMER NP TYPE NP-300 NP-200 NP-100 NP-180 N TYPE N-300 N-200 N-100 N-180 OLLET SERIES THRE SIZE 9/ / /4-12 9/ / /4-12 NP TYPE N TYPE OULE NGLE OLLET NUTS NUMER NP-30-W NP-20-W NP-10-W NP-18-W -30-W -20-W -10-W -18-W OLLET NUT NP-300 NP-200 NP-100 NP-180 N-300 N-200 N-100 N-180 1/2 11/16 7/8 1-3/16 3/4 1" 1-1/4 1-1/2 OULE NGLE WRENHES STRIGHT SHNK 87

88 SS STRIGHT SHNK riney TG OLLET EXTENSIONS NUMER OLLET SERIES OLLET RNGE WRENH SS125H SS150H SS200H TG075 TG100 TG TGN-075 TGN-100 TGN /16LH 1-1/8LH 1-5/8LH TG075HW TG100HW TG150SW Purchase collets separately, page 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. TG ft/lbs. TG ft/lbs. OLLET NUT STOP SREW TG OLLET NUTS NUMER TGN-075 TGN-100 * TGN-150 OLLET SERIES TG075 TG100 TG STYLE THRE SIZE 1-1/ / /8-12 * Hex or Spanner wrenches will work STYLE STYLE TG WRENHES NUMER OLLET NUT STYLE HEX TG075HW TG100HW TG100SW TG150SW TGN-075 TGN-100 TGN-100 TGN HEX HEX SPNNER SPNNER SPNNER 88

89 riney SS STRIGHT SHNK NUMER OLLET SERIES OLLET RNGE SS100F SS125F SS150F F50 F75 F FN-50 FN-75 FN-100 9/16 LH 13/16 LH 1-1/8 LH FG50HW FG75SW FG100SW Purchase collets separately, page 95. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: F ft/lbs. F ft/lbs. F ft/lbs. OLLET NUT STOP SREW WRENH RINEY FLEX OLLET EXTENSIONS RINEY FLEX OLLET NUTS NUMER OLLET SERIES STYLE THRE SIZE OLLET NUTS FN-50 FN-75 FN-100 F50 F75 F HEX SPNNER SPNNER / NOTE! Interchangeable with Universal ccura-flex nuts. RINEY GRIP OLLET NUTS NUMER OLLET SERIES STYLE THRE SIZE GN-50 GN-75 GN-100 G50 G75 G HEX SPNNER SPNNER / NOTE! Interchangeable with Universal ccura-grip nuts. NUMER FG50HW FG75SW FG100SW OLLET NUT F/GN-50 F/GN-75 F/GN STYLE HEX SPNNER SPNNER WRENHES STRIGHT SHNK HEX SPNNER 89

90 SS STRIGHT SHNK riney ULTR PREISION OLLET EXTENSIONS NUMER SS050R SS075R SS100R SS100R SS125R OLLET SERIES R11 R16 R20 R25 R32 OLLET RNGE OLLET STOP NUT SREW WRENH 3.50 RN-11M 5/16LH R11MW RN-16M 7/16LH R16MW RN-20M 9/16LH R20MW RN-25 5/8LH R25SW RN-32 7/8LH R32SW Purchase collets separately, pages 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R11-25 ft/lbs. R16-40 ft/lbs. R20-70 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. ULTR PREISION OLLET NUTS NUMER OLLET NUT STYLE WRENH THRE SIZE STYLE MINI STYLE HEX STYLE SPNNER RN-11M RN-11 RN-16M RN-16 RN-20M RN-20 RN-25 RN-32 RN-40 RN-50 R11 R11 R16 R16 R20 R20 R25 R32 R40 R R11MW R11HW R16MW R16HW R20MW R20HW R25SW R32SW R40SW R50SW M13 x.75 M14 x.75 M19 x 1.0 M22 x 1.5 M24 x 1.0 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M64 x 2.0 STRIGHT SHNK ULTR PREISION WRENHES STYLE MINI STYLE HEX NUMER R11MW R11HW R16MW R16HW R20MW R20HW R25SW R32SW R40SW R50SW OLLET NUT RN-11M RN-11 RN-16M RN-16 RN-20M RN-20 RN-25 RN-32 RN-40 RN STYLE STYLE SPNNER 90

91 riney ESSORIES THE HUK MNUFTURING O. NO MOEL NO. 3 3K(2) 3P(3) (4) 36 36K(2) 36P(3) PITY RNGE IMENSIONS MOUNT KEY MINIMUM MXIMUM LOSE LENGTH OPEN LENGTH SLEEVE JOS NO. IN MM IN MM IN MM IN MM IN MM (1) 0(1) 0(1) 0(1) JT 3 JT 3 JT 2 JT 6 JT 33 JT 33 JT 3 JT 3 JT 3 JT K3 K3 K3 K3 K3 K3 K3 K4 K4 K (1) Minimum capacity will hold a No. 70 (.028in/.71 1mm) drill. (2) Equipped with positive drive slot. (3) Equipped with pin-type positive drive. (4) Equipped with locking collar. Features Heavy and Medium uty models for threaded or taper mounting. Jaws center-ground for absolute straightness and alignment. Jaws specially treated to ensure extended thread life and high gripping surface hardness. One-piece sleeve eliminates crack between driving teeth often found in other designs. Through-hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance. Each chuck 100% inspected for performance and precision. PLIN ERING HUKS The O.E.M. standard for accuracy and durability on all types of industrial power and machine tools. Made in U.S.. NO MOEL NO. 8-1/2N 11N 14N 16N 18N 20N PITY RNGE IMENSIONS MOUNT KEY MINIMUM MXIMUM LOSE LENGTH OPEN LENGTH SLEEVE JOS NO. IN MM IN MM IN MM IN MM IN MM 0(1) 0(1) 0(1) *2JT 2JT 3JT 3JT 4JT 5JT K30 K32 K3 K4 K4 K * Short Style (1) Minimum capacity will hold a No. 7 (.028in/.71 1mm) drill. Features all bearing construction maximizes gripping force and drilling accuracy. Jaws center-ground for absolute straightness and alignment. Jaws specially treated to ensure extended thread life and high gripping surface hardness. One-piece sleeve eliminates crack between driving teeth often found in other designs. Through-hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance. Fluted sleeve standard. Each chuck 100% inspected for performance and precision. LL ERING SUPER HUKS esigned for close tolerance, production drilling on precision equipment. Made in U.S.. RILL HUKS 91

92 THE HUK MNUFTURING O. ESSORIES riney INUSTRIL KEYLESS HUKS HIGH PREISION MOEL Precision design combines keyless operation with the ultimate in drill chuck accuracy. ertified for maximum.0016" T.I.R. For general machining applications. NO MOEL NO. 80-J2S 100-J2 100-J J2 130-J J6 160-J6 PITY RNGE (1) IMENSIONS MOUNT MINIMUM MXIMUM LOSE LENGTH OPEN LENGTH SLEEVE JOS IN MM IN MM IN MM IN MM IN MM J2S J2 J33 J2 J33 J6 J Features ertified and guaranteed in writing to.0016" T.I.R. or better. Each chuck precision tested and furnished with an individualized certification number identifying its specific performance characteristics. Self-tightening feature automatically increases gripping force proportional to increased torque to prevent tool shank slippage. ll components exposed to wear are completely hardened to maintain accuracy and extend chuck life. Jacobs taper mount permits use on a wide range of high accuracy drill presses, jig borers, milling machines and production drilling equipment. RILL HUKS HIGH TORQUE / HIGH PREISION MOEL NO MOEL NO. 80-J2S 130-J2 130-J J6 160-J6 PITY RNGE (1) IMENSIONS MOUNT MINIMUM MXIMUM LOSE LENGTH OPEN LENGTH SLEEVE JOS IN MM IN MM IN MM IN MM IN MM J2S J2 J33 J6 J (1) Minimum capacities Models JKP and JKT apacity: 0-8mm rill Size:.012in 0-10mm.020in 1-13mm.033in 3-16mm.114in Features ertified and guaranteed in writing to.0016" T.I.R. or better. For use on N machining centers in drilling, boring, counterboring and milling operations requiring heavy penetration. Furnished with milled wrench flats and spanner wrench to allow the application of supplementary gripping torque. Light tightening increases gripping torque up to 3 times higher than hand tightening. Resists tool loosening on high speed machines with right hand rotation and instant spindle stop