Connecting technology Summary of ranges

Transcription

1 Connecting technology Summary of ranges Lightweight connecting fittings Summary Connecting fittings for carcases Summary Other connecting fittings Summary Adjustment systems for seating and beds Summary Plinth adjustment fittings Summary Shelf supports / rails and brackets Summary Cabinet suspension brackets and suspension rails Summary Buffers 884 Technik für Möbel 757

2 Lightweight connecting fittings The lighter way to impress. inject is the intelligent connecting technology for lightweight panels. With these strong fittings you can create first class innovative lightweight furniture and interior design. And present pioneering ideas to your customers. Take advantage of the new design flexibility with inject for lightweight materials. Large but lighter: Sliding doors of lightweight design permit use of light fittings. Spot on: With inject, stability can be generated precisely at the most appropriate point. Creative lighting design: Light sources can be positioned anywhere in lightweight furniture. inject VB Insert: Flexible positioning of fixing points. Simple drilling

3 Lightweight connecting fittings Summary inject Bonding dowels for lightweight applications with ultrathin face layers, can be used for standard fittings 760 VB Insert Concealed connecting fitting for lightweight applications with particularly positive fitting and friction locked connections using the tried and proven eccentric cam latching principle 761 VB 36 HT Connecting fitting for lightweight applications with particularly positive fitting and friction locked connections using the tried and proven eccentric cam latching principle 762 inject Titan 50 Shelf support mount for lightweight furniture applications with Titan shelf support Process information for inject The standard for production in controlled processes Technik für Möbel 759

4 Bonding dowel inject inject diameter 4 mm Flexible positioning Compensates tolerances Unsurpassed reliability Permits use of different glues, e.g. Henkel Loctite or Delo Duopox Suitable for chipboard and direct fixing screws with ø 4 mm For drilling diameter of 10 mm Plastic, white Length mm Order no. PU /200 ea /200 ea /200 ea /200 ea /200 ea /200 ea /200 ea. Installation with drilled lower face layer Installation with 1-3 mm gap to lower face layer 3 3 Length Length inject diameter 6.3 mm Flexible positioning Compensates tolerances Unsurpassed reliability Permits use of different glues, e.g. Henkel Loctite or Delo Duopox Suitable for chipboard and direct fixing screws with ø 6.3 mm For drilling diameter of 10 mm Plastic, white Length mm Order no. PU /200 ea /200 ea /200 ea. Installation with drilled lower face layer Installation with 1-3 mm gap to lower face layer 5 5 Length Length

5 Eccentric cam connecting fitting inject VB Insert 38 / 50 inject VB Insert Invisible connecting fitting for very sturdy, positive fittings and friction locked connections between shelves and side panels based on the proven eccentric cam latching principle Can be used with face layers from 4 mm For panel thicknesses of 38 or 50 mm Permits use of different glues, e.g. Henkel Loctite or Delo Duopox Housing: white plastic Eccentric cam: zinc die-cast Page reference: For dowel accessories: DU 232 T, DU 320 T, see page Article version Drilling diameter mm Order no. VB Insert /200 ea. VB Insert /200 ea. PU 36,5 ø 6 - ø / 44 Optional drilling for tightening the eccentric cam from above 4 ø 6 - ø 8 38 / / / / 25 ø 32 / 44 Technik für Möbel 761

6 Eccentric cam connecting fitting VB 36 HT 38 / 50 VB 36 HT with rib Insert shelf from above. Installation aid for hooking in the shelves VB 36 HT without rib Insert shelf from above or from the front Connecting fitting for sturdy, positive fittings and friction locked connections between shelves and side panels based on the tried and proven eccentric cam latching principle Can be used with face layers from 3 mm For panel thicknesses from mm or from mm The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes with 25 and 10 mm ø Only for mounting in edged lightweight panels Knock in pin increases expanding action With optional rib as installation aid Housing: black plastic Eccentric cam: zinc die-cast Page reference: For screw in dowel, see page VB 36 HT 38 for 38 mm shelves Drilling pattern for shelves ø 10 3 ø ø 12 Optional drilling for tightening the eccentric cam from above Colour Order no. / article version PU with rib without rib black /200 ea. 11,5 +0,5 VB 36 HT 50 for 50 mm shelves Drilling pattern for shelves Colour Order no. / article version PU ø 10 ø ø 12 Optional drilling for tightening the eccentric cam 15 from above 32 +0,5 11, with rib without rib black /200 ea. Cover cap for VB 36 HT Zinc die-cast nickel plated Finish Order no. PU nickel plated /200 ea

7 Mount for shelf supports / shelf supports inject Titan 50 / Titan 1 with side adjustment inject Titan 50 For sturdy, positive fitting and friction locked attachment of the Titan 1 shelf support (order no ) Concealed installation behind the shelf Can be used with face layers from 4 mm For panel thickness 50 mm Only for mounting in edged lightweight panels Permits adjustment of the height, lateral fit and tilt of the shelf support Permits use of different glues, e.g. Henkel Loctite or Delo Duopox For load capacity, see Titan 1 shelf support Plastic, white Order no. PU /20 ea. ø 36 ø 36 ø 44 1/2 50 ø Titan 1 with side adjustment Concealed installation behind the shelf Bolt: 10 mm AF Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm, 100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm Height adjustment: ± 4 mm Side adjustment ± 4 mm Minimum shelf thickness: 24 mm Adjustment of shelf tilt Steel, galvanised Page reference: For fixing screws (order no ), see page 882 Order no. PU /20 ea % 25 % ± ± % SW ø 5,5 x 50 Technik für Möbel 763

8 Process information for inject Bonding dowel inject The inject bonding dowel guides the glue to the upper and lower face layers via flow channels. This produces a 3-dimensional structure similar to a supporting system connecting the face layers. The result is a highly stable structure capable of absorbing tensile forces as well as compressive forces. Even lightweight panels with very thin face layers (< 4 mm) can be processed reliably. Cycle times are short, as little glue is required. The curing time can be selected individually, depending on the glue used. Glues which can be used include e.g. Henkel Loctite or Delo Duopox. 1 Drilling in the lightweight panel, drilling chips can be left in the panel. 2 Fitting the inject and simultaneously gluing the dowel 3 The glue bonds the chips and dowel to the face layers and honeycomb structure over a large area. The process is identical for the inject VB Insert connecting fitting

9 Process information for inject Eccentric cam connecting fitting inject VB Insert 38 / 50 The totally concealed inject VB insert connects size 38 or 50 mm lightweight panels with 4 mm thick face layers. A standard drilling is all that is needed for its use, thus saving time in relation to surface cutting. The glue for the VB insert is applied at two points from which it simultaneously flows through special glue channels to both face layers, securing the fitting. Glues which can be used include e.g. Henkel Loctite or Delo Duopox. Ideal distribution of forces ensures that the finished product can withstand high load capacities. One exceedingly useful advantage is that this connecting fitting can be combined with the tried-and-tested Twister dowel. The fitting is inserted at any desired attachment point from the front and can be operated from both sides. inject supplies a growing concept with future potential for processing - a concept permitting maximum flexibility combined with reliable process control in production. The entire process is implemented in any process chain, from manual processing, upgrading individual machine tools in CNC production to all-automatic production lines and complete concepts for passthrough production. Technik für Möbel 765

10 Process information for inject Pull-out values in lightweight panels N Pull-out values in lightweight panels with an 4 mm face layer 1. Direct fixing screws N 2. Special screws for lightweight panels N 3. ich socket no. 4 HT N 4. inject bonding dowel N Pull-out values in lightweight panels with an 8 mm face layer 5. Special screws for lightweight panels N 6. inject bonding dowel N Pull-out values for a direct fixing screw in 19 mm solid chipboard N Use recommended in lightweight boards Use not recommended in lightweight boards 750 Face layer thickness The pull-out value increases slightly as the thickness of the face layer increases N 2,7 mm 3 mm 4 mm Pull-out value was determined in tests using honeycomb board with face layers of chipboard to DIN EN 312 and bulk density to DIN EN The pull-out values of fastening material can be strongly affected by the nature and quality of the lightweight panels used as well as the manufacturing tolerances. Therefore the application of the selected fastening material needs to be verified from cast to case

11 Process information for inject Pull-out values in lightweight panels Without frame < 4 mm face layer With frame < 4 mm face layer Without frame > 8 mm face layer With frame > 8 mm face layer Fitting 4 mm face layer 4 mm + inject Without frame 4 mm + socket no. 4 HT 8 mm face layer Connecting fittings VB 18 / 20 D / 19 / 21 D VB 36 / 36 M / 36 HT / 36 HT M inject VB insert Shelf support Sekura / 30 kg Rear panel connectors Screw in dowel for VB Cabinet rail supports 8 mm + inject Hinges Intermat (Wood) screws D3.5 / D4.0 Euro screws D6.3 * * Sensys (Wood) screws D3.5 / D4.0 Euro screws D6.3 * * SlideOn (Wood) screws D3.5 / D4.0 Euro screws D6.3 * * Mounting plate (Wood) screws D3.5 / D4.0 / D4.5 Euro screws D6.3 * * Drawer runners Quadro 25 Quadro V6 / V6+ / V8 Folding and sliding doors TopLine XL TopLine L TopLine 22 TopLine M TopLine 27 TopLine 110 door side SlideLine 66 door side HorizonSynchro WingLine 770 / 780 / 26 * Used for inject dowels with ø 5 mm screw slots The load capacity is determined by the quality of the lightweight panels used. Technik für Möbel 767

12 Connecting fittings for carcases ich keeps a firm hold. What fittings from ich join together just doesn't come apart. ich also supplies reliable and easy to use solutions for more difficult connections in furniture construction. Solutions that open up numerous design options using classic or lightweight materials. Convenient on-site assembly. ich fittings keep what you promise your customers. Small components, big performers: ich connecting technology is brimming with expertise. For perfect results. Spherical eccentric cam: For a better hold in the drill hole. The screwdriver can be held at an angle for greater convenience. Providing a firm hold: Strong connections between shelves and side panels. High load capacity

13 Connecting fittings for carcases Summary Rastex 15 and Rastex 25 eccentric cam connecting fittings Can be used in conjunction with fast installation dowels and screw in dowels Summary Megalock eccentric cam connecting fitting Can be used in conjunction with steel dowel and socket VB 20 / 21 eccentric cam connecting fittings Can be used in conjunction with steel dowels Eccentric cam connecting fitting with spherical eccentric cams VB 35 / VB 35 M Can be used in conjunction with steel dowels Eccentric cam connecting fitting with spherical eccentric cams VB 36 / VB 36 M Can be used with steel dowels VB 54 Toolex / VB 135 / Alfa Stop / Beta Tool-less shelf mounting to the carcase TZ4, TZ 4 STD, TZ 28 block connecting fittings For connecting carcases, also suitable for solid wood Rostrino connecting fitting Concealed carcase connection Technik für Möbel 769

14 Connecting fittings for carcases Rapid S fast installation dowel, Twister screw in dowel Fast - faster - Rapid S The new generation of ich fast installation dowels with steel core. Slim, light and incredibly strong. Installation without the need for tools the dowel simply pushes into place. With Rastex, the Rapid S makes the perfect pair. Twister quickly fitted without the risk of injury By holding the freely rotating sleeve, the Twister can be driven in all the way safely and reliably throughout the insertion process with the cordless screwdriver preventing risk of injury from sharp edges or burrs. Rastex 15 can be used in combination with Twister and Rapid S dowels. Rastex 25 can be used in combination with Twister dowels. Coloured plastic sleeves in easy-togrip fluted design indicate dowel lengths. Green (dowel length 20 mm) for Rastex 15, blue (dowel length 24.5 mm) for Rastex 25 and black (dowel length 30 mm) for Rastex 15. Fast, tool-less installation, simply press by hand into the drilling in the carcase side. Easy to tell apart with coloured expanding elements for 8 mm (blue) and 10 mm (green) drillings

15 Connecting fittings for carcases Summary Rastex 15 eccentric cam connecting fitting can be used in conjunction with fast installation dowels Rapid S dowels and screw in Twister dowels and steel dowels, diameter 15 mm Rastex 25 eccentric cam connecting fitting can be used in combination with screw in Twister dowels, Diameter 25 mm Megalock eccentric cam connecting fitting can be used in combination with dowel and socket 781 VB 20 / 21 eccentric cam connecting fittings, VB 35 / 35 M / 36 / 36M, Toolex VB 54 / VB 135 / Alfa Stop / Beta shelf connecting fittings, block connecting fittings, Rostrino connecting fitting Range summary 782 End screws, sleeves, sockets, screws, cover caps 799 Accura assembly machinery Technik für Möbel 771

16 Eccentric cam connecting fitting Rastex 15 With torque support allows furniture side panels to be pulled into place from space up to 4 mm from the panel end Twice as secure thanks to interior and exterior indentations the dowel is always pulled in to the centred position, ruling out any displacement of furniture components! Eccentric cam can be tightened with flat-blade screwdriver, Pozidrive screwdriver PZ 3 or Allen key AF 4 With or without rim, the rim covers any jagged drillings, making an additional cover cap unnecessary zinc die-cast Page reference: For drill bits for hand and pillar drills, see page 1219 Rastex 15 with rim Finish Order no. / panel thickness mm PU nickel plated /200 ea. nickel plated ea. Rastex 15 without rim Order no. / panel thickness mm Finish PU bright /200 ea. bright ea. nickel plated /200 ea. nickel plated ea

17 Eccentric cam connecting fitting Rastex 15 Cover caps Cover caps for Rastex 15 without rim (except for Rastex 15 / 12) Plastic Colour Order no. PU 1 white /200 ea. 2 brown /200 ea. 3 black /200 ea. 4 light brown /200 ea. 5 beige /200 ea. 6 grey /200 ea. Technik für Möbel 773

18 29 19,2 14,5 Eccentric cam connecting fitting Rastex 15 Rastex 15 for 12 mm bottom panel Rastex 15 for 15 mm bottom panel ,5 / - 0,3 + 0,5 / - 0,3 7, ,5 / - 0,3 + 0,5 / - 0, ,2 7,5 Rastex 15 for 16 mm shelf Rastex 15 for 18 mm bottom panel ,5 / - 0,3 + 0,5 / - 0, ,5 / - 0,3 + 0,5 / - 0, , ,4 9 Rastex 15 for 19 mm bottom panel 8 15 Rastex 15 for 22 mm bottom panel , ,5 / - 0,3 + 0,5 / - 0, ,5 / - 0,3 + 0,5 / - 0, ,7 9, ,7 11 Rastex 15 for 29 mm bottom panel , ,5 / - 0,3 + 0,5 / - 0,

19 Eccentric cam connecting fitting Rastex 15 Rapid S dowel for Rastex 15, Twister dowel for Rastex 15 Rapid S fast installation dowel DU 324 / DU / 34 ø 8 ø 8 11 Expanding socket for 8 mm drilling diameter Dowel length 20 mm / 30 mm Steel, galvanised / blue plastic Article version Dowel length mm Order no. PU Rapid S DU /200 ea. Rapid S DU /200 ea. 20 / 30 10,5 Rapid S fast installation dowel DU 332 / DU / 34 ø 8 ø Expanding socket for 10 mm drilling diameter Dowel length 20 mm / 30 mm Steel, galvanised / green plastic Article version Dowel length mm Order no. PU Rapid S DU /200 ea. Rapid S DU /200 ea. 20 / 30 10,5 Twister screw in dowel DU 319 T / DU 320 T 24 / 34 ø 8 9 ø 5 With direct fixing thread for drilling diameter of 5 mm Dowel length 20 mm / 30 mm DU 320 T can also be used for VB Insert for lightweight panels with 8 mm face layers For lightweight panels with 4 mm face layers installation only with inject bonding dowels Steel / green or black plastic Can be used in System / 30 8,5 Article version Dowel length mm Order no. PU Twister DU 319 T, galvanised Twister DU 320 T, galvanised /200 ea /200 ea. Technik für Möbel 775

20 Eccentric cam connecting fitting Rastex 15 Twister dowel for Rastex 15 Twister screw in dowel DU 243 T / DU 232 T 24 / 34 ø 8 11,5 ø 5 With direct fixing thread for drilling diameter of 5 mm Dowel length 20 / 30 mm DU 232 T can also be used for VB Insert for lightweight panels with 8 mm face layers For lightweight panels with 4 mm face layers installation only with inject bonding dowels Steel / green or black plastic Can be used in System 32 Article version Dowel length mm Order no. PU 20 / Twister DU 243 T, galvanised Twister DU 232 T, galvanised /200 ea /200 ea. Twister screw in dowel DU 644 T 34 ø 8 11,5 ø 8 / 10 M6 x 7.8 mm thread Dowel length 30 mm Steel / black plastic Advice: Please order M6 sockets separately, see page ,8 M 6 Article version Order no. PU Twister DU 644 T, galvanised /200 ea. Screw in dowel DU 425 / DU /34 ø / 30 7,8 ø 5 / 6 / 8 / 10 M 4 M4 x 7.8 mm thread Dowel length 20 / 30 mm Steel Can be used in System 32 Advice: Please order M4 sockets separately, see page Article version Dowel length mm Order no. PU DU 428 bright /200 ea. DU 425 bright /200 ea

21 Eccentric cam connecting fitting Rastex 15 Dowels for Rastex 15 Double dowel DU 883 / DU / 34 ø 8 24 / For 16 mm centre panel With Seeger circlip ring Drilling diameter 8 mm Dowel length 36 / 56 mm or 46 / 76 mm Steel Article version Dowel length mm Order no. PU DU 883 galvanised /100 ea. DU 868 galvanised /100 ea. 36 / / 76 Double dowel DU 880 / DU / 34 ø 8 24 / / / 79 For 19 mm centre panel With Seeger circlip ring Drilling diameter 8 mm Dowel length 39 / 59 mm or 49 / 79 mm Steel Article version Dowel length mm Order no. PU DU 880 galvanised /100 ea. DU 853 galvanised /100 ea. Technik für Möbel 777

22 Eccentric cam connecting fitting Rastex 15 Dowels for Rastex 15 Angle dowel DU α X ø 7 Adjustable from Drilling diameter 7 mm Dowel length mm Steel, galvanised Order no. PU /100 ea. Angle dowel DU 634 x 44 ø7 α 15 ø 8 39 M6 x 7 mm thread Drilling diameter 8 mm Dowel length 39 mm Steel, galvanised Advice: Please order M6 sockets separately, see page Order no. PU /100 ea. Drill hole spacing X mm for DU 860 Drill hole spacing X mm for DU 634 Angle Shelf thickness Shelf thickness Shelf thickness Shelf thickness Shelf thickness 15 mm 16 mm 19 mm 22 mm 29 mm ,7 37,3 36,0 34,8 31, ,2 37,9 36,7 35,6 32, ,7 38,4 37,3 36,3 33, ,2 38,9 37,9 37,0 35, ,7 39,4 38,5 37,7 35, ,1 39,8 39,1 38,3 36, ,5 40,3 39,6 38,9 37, ,9 40,7 40,1 39,4 38, ,3 41,1 40,5 40,0 38, ,6 41,5 41,0 40,5 39, ,0 41,9 41,5 41,1 40, ,3 42,2 41,9 41,6 40, ,7 42,6 42,3 42,1 41,4 Angle Shelf thickness 15 mm Shelf thickness 16 mm Shelf thickness 19 mm Shelf thickness 22 mm Shelf thickness 29 mm 30 57,0 57,9 60,5 63,1 69, ,7 55,4 57,6 59,7 64, ,9 53,5 55,3 57,1 61, ,5 52,0 53,5 55,0 58, ,3 50,7 52,0 53,2 56, ,3 49,6 50,7 51,7 54, ,3 48,6 49,5 50,4 52, ,5 47,7 48,4 49,1 50, ,7 46,9 47,5 48,0 49, ,0 46,1 46,5 46,9 47, ,3 45,4 45,7 45,9 46, ,7 44,7 44,8 45,0 45, ,0 44,0 44,0 44,0 44,

23 Eccentric cam connecting fitting Rastex 25 Rastex 25 The latching stages on the curved tensioning surface and sawtoothlike exterior indentations prevent the eccentric cam from working loose The dowel is always tightened centrically The reverse torque is three time higher than that of comparable eccentric cam fittings With or without rim, the rim covers any jagged drillings, making an additional cover cap unnecessary zinc die-cast Page reference: For drill bits for hand and pillar drill, see page 1219 Article version Finish Order no. PU 1 with rim nickel plated /200 ea. 2 without rim bright /200 ea. Interior and exterior indentation - double security! Hole distance A = Dowel length + 9 mm 8 ø 25 7 A (33,5) Dowel centre from underside of bottom panel 12 7 Cover caps for Rastex 25 Plastic Colour Order no. PU 1 white /200 ea. 2 brown /200 ea. 3 beige /200 ea. 4 black /200 ea. Technik für Möbel 779

24 Eccentric cam connecting fitting Rastex 25 Dowels for Rastex 25 Twister screw in dowel DU 262 T 33,5 ø 8 11,5 ø 5 Direct fixing thread for drilling diameter of 5 mm Dowel length 24.5 mm Steel / plastic, blue Can be used in System 32 Article version Order no. PU Twister DU 262 T, galvanised /200 ea. 24,5 11 Screw in dowel DU 643 ø 8 ø 8 M6 x 7.8 mm thread Dowel length 24.5 mm Steel 33,5 11,5 Advice: Please order M6 sockets separately, see page ,5 7,8 M 6 Article version Order no. PU DU 643 bright /200 ea

25 Eccentric cam connecting fitting Megalock Suitable for permanently stressed connections Suitable for carcase and bed construction, as well as bar and face frame construction The fitting consists of the following components: - Eccentric cam: zinc die-cast, galvanised - Dowel: steel, galvanised with M6 thread or M8 thread - Socket: brass with M6 thread or M8 thread - Cover cap for eccentric cam: black or white plastic, ø 35 mm for pressing into the workpiece drilling, ø 32 mm for pressing into the eccentric cam connecting fitting Page reference: For drill bits for hand and pillar drills, see page 1219 Eccentric cam Drilling pattern for shelves 35 Order no. PU 9, ,5 1/500 ea. ø 35 Steel dowels / brass sockets 35 Article version Thread Order no. PU ø 10 Dowel M /100 ea. Dowel M /100 ea. Socket M /500 ea. M6 / M8 x 13 Socket M /500 ea. ø Cover caps ø 38 1,5 ø 38 1,5 Diameter mm Colour Order no. PU ø 32 ø black /1000 ea. 32 white /1000 ea. 35 black /1000 ea. 35 white /1000 ea. Technik für Möbel 781

26 Connecting fittings for carcases Range summary Eccentric cam connecting fittings VB 20 / Eccentric cam connecting fittings VB 35 / 35 M / 36 / 36 M Shelf connecting fittings VB 54 Toolex / VB 135 / Alfa Stop / Beta Block connecting fittings TZ 4, TZ 4 STD, TZ Rostrino connecting fitting

27 Eccentric cam connecting fitting VB 20 With rib Insert shelf from above. Installation aid for hooking in the shelves For strong, positive fitting and friction locked connections between shelves and side panels, high load capacity. The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes with ø 30 and 10 mm The shelf can be inserted from above The eccentric cam can also be tightened in the bottom panel from above. A through-hole is required in the bottom panel for this purpose. For special applications, a plinth adjustment element can be adjusted through the fitting, see page Zinc die-cast nickel plated Can be used in System 32 Page reference: For drill bits for hand and pillar drills, see page 1219 VB 20 for mm shelves Drilling pattern for shelves Finish / colour Order no. PU 15 +0,5 ø , ,5 nickel plated /200 ea. 10, Dowel centre from underside of shelf 9,5 Technik für Möbel 783

28 Eccentric cam connecting fitting VB 21 without rib Insert shelf from above or from the front For strong, positive fitting and friction locked connections between shelves and side panels, high load capacity. The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes with ø 30 and 10 mm The shelf can be inserted from above or from the front The eccentric cam can also be tightened in the bottom panel from above. A through-hole is required in the bottom panel for this purpose. For special applications, a plinth adjustment element can be adjusted through the fitting, see page Zinc die-cast nickel plated Can be used in System 32 Page reference: For drill bits for hand and pillar drills, see page 1219 VB 21 for mm shelves Drilling pattern for shelves 15 +0,5 ø ,5 Finish / colour Order no. PU nickel plated /200 ea. 14,5 10, Dowel centre from underside of shelf 9,

29 Eccentric cam connecting fitting VB 20, 21 Screw in dowel, cover caps Screw in dowel DU 327 ø 5 11,5 Direct fixing thread for drilling diameter of 5 mm Dowel length 9 mm Steel Can be used in System 32 Finish Order no. PU bright /200 ea Screw in dowel DU 427 ø 5 8,5 M 4 9 7,8 M4 thread Drilling diameter 5 mm Dowel length 9 mm Steel Can be used in System 32 Advice: Please order M4 sockets separately, see page Finish Order no. PU bright /200 ea. Cover caps For drilling diameter of 10 mm Plastic Colour Order no. PU white /200 ea. brown /200 ea. beige /200 ea. grey /200 ea. black /200 ea. Technik für Möbel 785

30 Eccentric cam connecting fitting VB 35 M With rib Insert shelf from above. Installation aid for hooking in the shelves Small connecting fittings for sturdy, positive fitting and friction locked connections between shelves and side panels using the tried and proven eccentric cam latching principle The fitting is pressed into the cropped 20 mm diameter drilling The fitting has a spherical eccentric cam Zinc die-cast / plastic Can be used in System 32 Page reference: For drill bits for hand and pillar drills, see page 1219 ~ 5 VB 35 M / 16 for 16 mm shelves Drilling pattern for shelves 20 9,5 +0, ,5 8 Finish / colour Order no. PU nickel plated /200 ea. white /200 ea. brown /200 ea. black /200 ea. Dowel centre from underside of shelf VB 35 M / 19 for 19 mm shelves Drilling pattern for shelves 20 9,5 +0, ,5 Finish / colour Order no. PU nickel plated /200 ea. white /200 ea. brown /200 ea. black /200 ea. Dowel centre from underside of shelf 786

31 Eccentric cam connecting fitting VB 35 without rib Insert shelf from above or from the front Small connecting fittings for sturdy, positive fitting and friction locked connections between shelves and side panels using the tried and proven eccentric cam latching principle The fitting is pressed into the cropped 20 mm diameter drilling The fitting has a spherical eccentric cam Zinc die-cast / plastic Can be used in System 32 Page reference: For drill bits for hand and pillar drills, see page 1219 ~ 5 VB 35 / 16 for 16 mm shelves Drilling pattern for shelves 20 9,5 +0, ,5 8 Finish / colour Order no. PU nickel plated /200 ea. white /200 ea. brown /200 ea. black /200 ea. Dowel centre from underside of shelf VB 35 / 19 for 19 mm shelves Drilling pattern for shelves 20 9,5 +0, ,5 Finish / colour Order no. PU nickel plated /200 ea. white /200 ea. brown /200 ea. black /200 ea. Dowel centre from underside of shelf Technik für Möbel 787

32 Eccentric cam connecting fitting VB 36 M With rib Insert shelf from above. Installation aid for hooking in the shelves Small connecting fittings for sturdy, positive fitting and friction locked connections between shelves and side panels using the tried and proven eccentric cam latching principle The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes in a diameter of 20 and 10 mm The fitting has a spherical eccentric cam Zinc die-cast / plastic Can be used in System 32 Page reference: For drill bits for hand and pillar drills, see page 1219 ~ 5 VB 36 M / 16 for 16 mm shelves Drilling pattern for shelves 9,5 +0, ,5 12,5 8 Finish / colour Order no. PU nickel plated /200 ea. white /200 ea. brown /200 ea. black /200 ea. Dowel centre from underside of shelf VB 36 M / 19 for 19 mm shelves Drilling pattern for shelves ,5 +0,5 Finish / colour Order no. PU nickel plated /200 ea. white /200 ea. brown /200 ea. black /200 ea ,5 14 9,5 Dowel centre from underside of shelf 788

33 Eccentric cam connecting fitting VB 36 without rib Insert shelf from above or from the front Small connecting fittings for sturdy, positive fitting and friction locked connections between shelves and side panels using the tried and proven eccentric latching principle The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes in a diameter of 20 and 10 mm The fitting has a spherical eccentric Zinc die-cast / plastic Can be used in System 32 Page reference: For drill bits for hand and pillar drills, see page 1219 ~ 5 VB 36 / 16 for 16 mm shelves Drilling pattern for shelves 9,5 +0, ,5 12,5 8 Finish / colour Order no. PU nickel plated /200 ea. white /200 ea. brown /200 ea. black /200 ea. Dowel centre from underside of shelf VB 36 / 19 for 19 mm shelves Drilling pattern for shelves ,5 +0,5 Finish / colour Order no. PU nickel plated /200 ea. white /200 ea. brown /200 ea. black /200 ea ,5 14 9,5 Dowel centre from underside of shelf Technik für Möbel 789

34 Screw in dowel VB 35, 35 M, 36, 36 M, 36 HT, 135 Dowels for VB 35, 35 M, 36, 36 M, 36 HT, 135 Screw in dowel DU ,5 ø 3 With direct fixing thread for drilling diameter of 3 mm Dowel length 6.7 mm Can also be used for lightweight panels with 8 mm face layers For lightweight panels with 4 mm face layers installation only with inject bonding dowels Steel, galvanised Can be used in System 32 6,7 11 Order no. PU /200 ea. Screw in dowel DU ,5 ø 5 With direct fixing thread for drilling diameter of 5 mm Dowel length 6.7 mm Can also be used for lightweight panels with 8 mm face layers For lightweight panels with 4 mm face layers installation only with inject bonding dowels Steel, galvanised Can be used in System 32 6,7 11 Order no. PU /200 ea. Screw in dowel DU ø 5 With direct fixing thread for drilling diameter of 5 mm Dowel length 6.7 mm Can also be used for lightweight panels with 8 mm face layers For lightweight panels with 4 mm face layers installation only with inject bonding dowels Steel, galvanised Can be used in System 32 6,7 7,8 Order no. PU /200 ea. Screw in dowel DU ,5 ø 8 / 10 M6 x 7.8 mm thread Dowel length 6.7 mm Steel Advice: Please order M6 sockets separately, see page ,7 7,8 M 6 Finish Order no. PU bright /200 ea. galvanised /200 ea

35 Screw in dowel VB 35, 35 M, 36, 36 M, 36 HT, 135 Dowels for VB 35, 35 M, 36, 36 M, 36 HT, 135 Screw in dowel DU 426 8,5 M 4 ø 5 / 6 / 8 / 10 M4 x 7.8 mm thread Dowel length 6.7 mm Steel, bright Can be used in System 32 Page reference: For accessories, M4 sockets, see pages Order no. PU /200 ea. 6,7 7,8 Double dowel DU 712 / DU 867 ø 5 16 / 19 6,7 16 / 19 6,7 For 16 mm and 19 mm centre panel Drilling diameter 5 mm Dowel length 6.7 mm Can be used for lightweight panels Steel, bright Can be used in System 32 Article version Panel thickness mm Order no. DU /100 ea. DU /100 ea. PU Technik für Möbel 791

36 Shelf connecting fitting VB 54 Toolex Tool-less shelf mounting to the carcase For 3 mm ø and 5 mm ø hole lines Flexible locking catch in the connector housing for easy shelf removal, shelves can then be refitted at any time Housing rim always ensures correct housing position even in drillings that are drilled too deep For shelves in a thickness of 23 mm and over, keyhole suspension E provides the capability of premounting screws to carcase Wide range of screws for mounting supports in ø 3 mm and ø 5 mm hole lines Zinc die-cast nickel plated / grey plastic VB 54 all-inclusive item Support part for screwing on Support part for knocking in , ,3 T X Y T X 8 ø 5 9,5 E Article version Dimension T mm Dimension X mm Dimension Y mm Order no. PU VB 54/ /200 ea. VB 54/ /200 ea. VB 54/19 knock in socket /200 ea. VB 54/ /200 ea. VB 54/ /200 ea

37 Shelf connecting fitting VB 135, Alfa Stop / Beta Insert shelf from above. Assembly aid for hooking in the shelves The VB 135 connecting fitting is pressed into the cropped 20 mm ø drilling The shelf can only be inserted from above The bottom panel with the VB 135 is merely pressed onto the dowel. The wedging effect pulls the bottom panel to the side and prevents it from falling out Can be used for shelf thicknesses of 16 mm and over Plastic Can be used in System 32 Page reference: For drill bits for hand and pillar drills, see pages 1219 VB 135 Drilling pattern for shelves 9,5 +0, ,5 Colour Order no. PU white /200 ea. brown /200 ea. black /200 ea. Dowel centre from underside of shelf 8 Alfa Stop / Beta Drilling pattern for shelves ø 18 8,5 Alfa Stop support part with quick locking feature for combining with the Beta Gehäuseteil Beta housing element Support part can be locked into the side of the carcase with the aid of a screwdriver Zinc die-cast nickel plated ø 5 A B C 9 10 Article version Dimension A mm Dimension B mm Dimension C mm Order no. PU 1 Alfa Stop /500 ea. 2 Beta /1000 ea. 1 Alfa Stop /500 ea. 2 Beta /1000 ea. 1 Alfa Stop /500 ea. 2 Beta /1000 ea. 1 Alfa Stop /500 ea. 2 Beta /1000 ea. Technik für Möbel 793

38 Block connecting fitting TZ 4, TZ 4 STD TZ 4 With premounted screw All-metal TZ 4: angled screw for particularly easy installation Base section with spikes Housing: zinc die-cast or plastic Base section: steel Finish / colour Order no. PU nickel plated /100 ea. white /100 ea. brown /100 ea ,5 20, ,8 15,8 10, ø TZ 4 STD With premounted screw Catch mechanism in top component makes installation easy Oblong hole compensates for expansion / contraction of up to 4 mm in solid wood Housing: zinc die-cast nickel plated Base section: steel Finish / colour Order no. PU nickel plated /100 ea. 20,5 9 15,8 12, ,

39 Block connecting fitting TZ 28 TZ 28 For pressing in Socket length 10 mm Attached by ø 4 mm countersunk screw, with the capability of holding screwdriver at an angle Plastic, white Order no. PU /100 ea. 9,5 ø 8 10,5 Technik für Möbel 795

40 Connecting fitting Rostrino Detachable connecting fitting with catch springs Easy installation and removal of the carcase For concealed installation Can be used for carcase connectors Dowel and socket are braced via an additional drilling in the bottom panel using an hexagon socket spanner size 4 AF, screw the socket in using an hexagon socket spanner size 10 AF Connecting fitting with dowel and socket Zinc die-cast Rostrino dowel ø 6 Order no. PU /250 ea. 19 ø 12 ø ø 12 9,5 45 SW 4 Rostrino socket ø 14,8 ø 17,3 12,5 Order no. PU /250 ea. 13 1,5 ø ø

41 Technik für Möbel 797

42 Other connecting fittings Never seen, yet indispensable: ich connecting fittings reliably hold all modules together to provide lasting furniture stability. A range that has it all: for furniture carcases and worktops, plinths and drawer fronts, lightweight elements and much more besides ich has just the right connecting fitting that's also easy to install. The connecting fitting VB 25 T makes for sturdy connections with high load capacity. ich worktop connectors for secure, positive fitting and friction locked connections. Universal corner connector for small carcase units. Simple, straightforward installation

43 Other connecting fittings Summary Connectors with positive and non positive locking VB 25 T, VB 35 T, VB T, VB T Worktop connectors AVB 4, AVB 4 Slim, AVB EverFix, MultiClip, mitre connector VB 90 / VB 16 / VB Rear panel connector RV 1, RV 3, RV 7D, RV Front panel connector VB 15, connecting plate 814 Connecting angels, keyhole fittings and connecting screws Euro brackets, universal corner connectors, universal angles, Direkta 2, connecting screw VS, connecting screw VHS End screws, sleeves, sockets, screws, cover caps Accura assembly machinery Technik für Möbel 799

44 Connectors with positive and non positive locking VB 25 T VB 25 T For sturdy, positive fitting and friction locked connections with high load capacity An integrated 90 angle gear with hexagon socket permits quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF Dowel length mm Min. housing hole depth 20 mm Housing hole diameter 25 mm Through-hole ø 7 mm Housing: zinc die-cast Bolt and socket: steel, galvanised Page reference: For drill bits for hand and pillar drills, see page 1219 Order no. PU /50 ea ø ø 7 ø ø 7 ø 25 ø 6 ø 10 SW ø

45 Connectors with positive and non positive locking VB 35 T VB 35 T For sturdy, positive fitting and friction locked connections with high load capacity An integrated 90 angle gear with hexagon socket permits quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF Dowel length mm Min. housing hole depth 20 mm Housing hole diameter 35 mm Through-hole ø 7 mm Housing: zinc die-cast Bolt and socket: steel, galvanised Page reference: For drill bits for hand and pillar drills, see page 1219 Order no. PU /50 ea ø 7 ø 10 ø ø 7 ø 35 ø 6 ø 10 SW ø Technik für Möbel 801

46 Connectors with positive and non positive locking VB T VB T For sturdy, positive fitting and friction locked connections with high load capacity Infinitely adjustable for angled connections of A 90 angle gear integrated into the plastic housing with hexagon socket permits quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF Dowel length 60 mm Min. housing hole depth 20 mm Housing hole diameter 25 mm Through-hole ø 7 mm Housing: plastic Bolt and socket: steel, galvanised Page reference: For drill bits for hand and pillar drills, see page 1219 Order no. PU /50 ea ø 7 ø 6 SW 5 ø 25 ø 10 ø = = 802

47 Connectors with positive and non positive locking VB T VB T For sturdy, positive fitting and friction locked connections with high load capacity Infinitely adjustable for angled connections of An integrated 90 angle gear with hexagon socket permits quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF Dowel length 60 mm Min. housing hole depth 20 mm Housing hole diameter 25 mm Through-hole ø 9 mm Housing: zinc die-cast Bolt: steel, galvanised Page reference: For drill bits for hand and pillar drills, see page 1219 Order no. PU /50 ea ø 25 ø 9 ø 8 SW Technik für Möbel 803

48 Worktop connectors AVB 4 AVB 4 For sturdy, positive fitting and friction locked connections between worktops Quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF Drilling depth at least 20 mm Housing hole diameter 35 mm Housing: zinc die-cast Bolt / counterplate: steel, galvanised Page reference: For drill bits for hand and pillar drills, see page 1219 Dimension X mm Length mm Order no. PU /50 ea /50 ea /50 ea. X X 1. ø 35 ø 6 7 SW

49 Worktop connectors AVB 4 Slim AVB 4 Slim Suitable for panel thicknesses of 14 mm and over For sturdy, positive fitting and friction locked worktop connections Quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 4 AF Dowel length mm Housing hole diameter 25 mm Drilling depth at least 12.5 mm Housing: zinc die-cast Bolt / counterplate: steel, galvanised Page reference: For drill bits for hand and pillar drills, see page 1219 Order no. PU /50 ea. ø ø 25 SW 4 12,5 5,5 14 Technik für Möbel 805

50 Worktop connectors AVB 5 AVB 5 For sturdy, positive fitting and friction locked worktop connections With two curved clamping plates Two premounted clips ensure easy installation: They hold the clamping plates and connectors in position or groove, permitting easy insertion into drilling or routed recess while leaving both hands free for bracing Housing hole diameter 35 mm Drilling depth at least 20 mm Steel, galvanised Page reference: For drill bits for hand and pillar drills, see page 1219 Dimension X mm Length mm Order no. PU /50 ea /50 ea /50 ea X X ø 35 ø ø 35 Clips Clips Groove 806

51 Non detachable connecting fitting Everfix EverFix with threaded stud This inconspicuous connecting fitting merely consists of a threaded stud and a knock in socket with spring steel disc Components can easily be pressed together by hand to produce a non detachable connection Pull-out strength 500 N Page reference: For drill bits for hand and pillar drills, see page 1219 For hole marking jig, see page 1186 Finish / colour Order no. PU white / galvanised /200 ea. Carcase construction Drawer connection 3 ø 5 Leg-to-surface connection Fascia connection ø ,5 16,5 13 EverFix with Duplo This inconspicuous connecting fitting merely consists of a threaded stud and a knock in socket with spring steel disc Components can easily be pressed together by hand to produce a non detachable connection Pull-out strength 500 N Page reference: For drill bits for hand and pillar drills, see page 1219 For hole marking jig, see page 1186 Finish / colour Order no. PU white / galvanised /200 ea. PU 200 = 400 Everfix Duplo Column connection ø 12 9,5 13 Technik für Möbel 807

52 Clip connector MultiClip MultiClip MultiClip can be used in many different applications For wall panelling, room dividers, cladding pillars, ceiling panelling, fascias and cladding of all types In all applications, the fitting can be screw mounted either parallel or at right angles to the fascia or cladding component If it is necessary to slide the clip connectors on from the front, one of the fittings is screw mounted at an angle of 90 Whether for interior fittings, contract work or volume production, this fitting is a cost-saver - always and everywhere Only 1 fitting component for all types of application The clip connector components provide a secure hold with spring loaded flexible clamps and serrated surfaces Variable screw on positions permit to hooking in from above, from the front, from the side as well as flush fitted Compensation for mounting tolerances Clip connectors can be adjusted for perfect alignment Thermoplastic material, black (heat resistant) Order no. PU /200 ea ø

53 Mitre connector VB 90 VB 90 This fitting is ideal for connecting cabinet elements or front panel components positioned at extreme angles E.g. cabinets fitted under sloping ceilings or angled combinations in the office furniture segment The joint adjusts to all angles from 30 to 270 Zinc die-cast nickel plated Attached with screws for direct fixing in holes with 5 mm diameter or with M6 hexagon head screw and sleeve No. 100 for drilling diameter 10 mm, sleeve, see page 820, 822 The VB 90 is incredibly easy to install: To begin with, the fitting is attached to the first side and then pushed onto a screw premounted on the second side. If doors are to open by an angle of less than 90, a hexagon head screw should be used for this purpose so as to permit final fixing with an open ended spanner. Order no. PU /100 ea. 4 thick 6, Technik für Möbel 809

54 Mitre connector VB 16, VB 160 VB 16 The wide clamping range from 36 to 46 mm accommodates all profile cross-sections The high clamping force presses the mitres together to produce a tight fit Zinc die-cast, galvanised Page reference: For drill bits for hand and pillar drills, see page 1219 Order no. PU /100 ea. SW ø VB 160 For shallow door frames or cornices Recess depth 10 mm Housing: brown plastic Angle: steel, galvanised Page reference: For drill bits for hand and pillar drills, see page 1219 Order no. PU /100 ea. ø 20 20,5 20,

55 Rear panel connector RV 1, RV 3 Rear panel connector RV 1 Can be mounted in a hole line hole diameter of 5 mm Fitting holds rear panel tight against carcase side Zinc die-cast nickel plated Can be used in System 32 Page reference: For rear panel screws, see page 823 Article version Order no. PU without direct fixing screw /100 ea. 5 ø ø 5 2,2 Rear panel connector RV 3 Oblong hole compensates drilling tolerances Attachment with direct fixing screw ø 6.3 mm Zinc die-cast nickel plated Page reference: For direct fixing screws, see page 822 Finish / colour Order no. PU nickel plated /100 ea. 5 ø ,5 Technik für Möbel 811

56 Rear panel connector RV 7 D Fixing elements Rear panel connector RV 7 D With the RV 7 D, the rear panel is secured from the inside This makes assembly work easier because the cabinet can be assembled off the wall The RV 7 D can be mounted with various fixing elements: with countersunk screw, with M6 x 12 panhead screws (DIN 7985) and threaded cap or socket, with direct fixing screw or with the MultiClip Height adjustable by +/- 1 mm at oblong hole Zinc die-cast nickel plated Can be used in System 32 Order no. PU /100 ea. Examples of application RV 7D 15 ø ø 5 37 ø10 ø ø ø 5 ø ø ø 5 37 Flush overlay back panel Flush overlay back panel (min. 16 mm), mounting with (min. 16 mm), mounting raised head screw M 6 x 12 with raised head screw (DIN 7985) and socket No. 1 M 6 x 12 (DIN 7985) with threaded cap M6 Rebated back panel, mounting with Panhead screw diameter 4 x 12 mm Centre panel mounting with Panhead screw diameter 4 x 12 mm Flush overlay back panel, mounting with MultiClip Accessories, RV 7 D / fixing elements Article version Dimensions mm Order no. PU Direct fixing screw ø 6.3 x ea. Countersunk head screw ø 3.5 x 12 mm ea. Panhead screw ø 4 x ea. Oval head screw M6 x ea. Threaded cap, white /1000 ea. Socket No. 100 M /200 ea. MultiClip /200 ea

57 Rear panel connector RV 8 Rear-panel connector RV 8 For fixing drawer bottom panels and rear panels Plastic, white Screw ø 3.5 x 20 mm galvanised Order no. PU /200 ea. 4, ,7 Technik für Möbel 813

58 Front panel connector VB 15, connecting plate VB 15 Includes plastic spacer, 2 mm thick Steel, galvanised Order no. PU /100 ea Connecting plate for front panels Steel, galvanised Length mm Order no. PU /50 ea /50 ea. 80 ø 5,5 16 7,5 17, ,5 2 ø 4, ,

59 Connecting angles Euro angle Euro angle for 32 mm hole line Can be used as a multi-purpose connecting fitting for carcases, shelves, rear panels and drawer fronts Connecting angles: steel, galvanised Plastic cover cap Direct fixing screws, ø 6.3 mm Can be used in System 32 Page reference: For direct fixing screws, see page 822 Article version Finish / colour Order no. PU Connecting angles galvanised /200 ea. Cover cap white /200 ea. Cover cap brown /200 ea. Cover cap black /200 ea. Cover cap grey /200 ea. 11,5 ø , ,5 50 Technik für Möbel 815

60 Connecting elements Universal corner connector Universal corner connector Universal corner connector for small carcases and for supporting low loads For attachment with 3.5 mm ø countersunk head screw The cover cap simply clips on to conceal the screws Plastic Colour Order no. PU white /100 ea. black /100 ea. A PU contains 100 connectors and 100 cover caps 20,5 20,5 ø 3, ø

61 Connecting angles and keyhole fittings Universal angle, keyhole fitting Universal angle 41.5 x 41.5 mm 17,5 16,5 41,5 ø 5,5 2 Steel, galvanised Order no. PU /100 ea ,5 Universal angle 31 x 31 mm ø 4, ø 4,5 Steel, galvanised Order no. PU /100 ea. 6,5 12 Keyhole fitting, 42 mm 14,5 2 Steel, galvanised 20 6, Order no. PU /100 ea. 5 ø 4,8 Keyhole fitting 62 mm Steel, galvanised Order no. PU 22 6, /100 ea. ø 4,8 Technik für Möbel 817

62 Connecting screws Direkta, VS Direkta 2 ø 7 ø 5 With drilled head and Pozidrive screw Steel, galvanised Page reference: For step drill bits for upright and hand drills, see page 1219 Article version Length mm Order no. PU Direkta 6.3 x 40 mm /500 ea. Direkta 6.3 x 50 mm /500 ea. Cover cap, white /500 ea. Cover cap, brown /500 ea. Connecting screws VS Wood thickness ø 8 M6 thread for drilling diameter 8 mm PU 100 = 100 M6 steel pins threaded caps Steel, bright Plastic head: white or brown Article version Colour Panel thickness mm Order no. VS 26 white /100 ea. VS 29 white /100 ea. VS 29 brown /100 ea. VS 34 white /100 ea. VS 34 brown /100 ea. VS 39 brown /100 ea. VS 39 white /100 ea. VS 44 white /100 ea. VS 44 brown /100 ea. VS 49 white /100 ea. PU Threaded cap VS With M6 thread For drilling diameter of 8 mm Length 15 mm Plastic Colour Order no. PU white /1000 ea. brown /1000 ea

63 Connecting screws, end screws and sleeves VHS 32, End screws, sleeves Connecting screw VHS 32 Wood thickness ø 5 Unobtrusive carcase connectors for a particularly firm hold For drilling diameter of 5 mm The connecting sleeves are 27 or 35 mm long The threaded sleeve is set back, making it easier to screw the connecting screw in Screw M4 x 15 mm / connecting sleeve: nickel plated steel Article version Panel thickness mm Order no. VHS 32 / /100 ea. VHS 32 / /100 ea. PU End screw ø 9 L M 4 M4 thread Suitable for use with M4 threaded sleeve, see below Pozidrive screw Steel, galvanised Length mm Order no. PU ea. Threaded sleeve L For M4 thread For drilling diameter of 5 mm Suitable for use with end screw, see above Steel, galvanised Length mm Order no. PU /200 ea /200 ea /200 ea. Technik für Möbel 819

64 Sockets Plastic sockets Socket no. 49 ø 8 For M6 thread Drilling diameter 8 mm Suitable for use with Rastex 15 / 25, VB 20 / 21 and VB 35 / 36 Plastic, white 11 Order no. PU /200 ea. Socket no. 30 ø 8 For M4 thread Drilling diameter 8 mm Suitable for use with Rastex 15 / 25, VB 35 / 36 and VB 135 Plastic, white 8 Order no. PU /200 ea. Socket no. 33 ø 10 Drilling diameter 10 mm Suitable for use with Rastex 15 / 25, VB 20 / 21 and VB 35 / 36 Plastic, white 11 Order no. PU /200 ea. Socket No. 100 ø 10 For M6 thread Drilling diameter 10 mm Suitable for use with Rastex 15 / 25 and VB 35 / 36 Plastic, white 13 Order no. PU /200 ea

65 Sockets Plastic sockets, expanding sockets Socket M5 x 11 mm for folding door hinge 625 For M5 thread Drilling diameter 10 mm Plastic, white 11 ø 10 Order no. PU /200 ea. Plastic expanding socket ø 6,3 ø To secure fittings to lightweight panels with face layers of 3-4 mm Suitable for fittings with a resting load (known as static load) such as shelf supports, cabinet rail supports or rear panel connectors For drilling diameter of 8 mm Suitable for 6.3 mm direct fixing screw Plastic, white Order no. PU /500 ea. Expanding socket 7,8 ø 5 For M4 thread Drilling diameter 5 mm Suitable for use with Rastex 15 / 25, VB 20 / 21 and VB 35 / 36 Brass, bright Order no. PU /200 ea. Expanding socket 12 ø 8 For M6 thread Drilling diameter 8 mm With nylon ball, length 12 mm Suitable for use with Rastex 15 / 25, VB 20 / 21, VB 35 / 36 and VB 135 Brass, bright Article version Length mm Order no. PU with nylon ball /200 ea. Technik für Möbel 821

66 Screws Direct fixing screws, handle fixing screws Shallow countersunk head Shallow countersunk head Pozidrive screw Steel, galvanised Dimensions mm Order no. PU ø 4.5 x ea. ø 6.3 x ea. ø 6.3 x ea. ø 6.3 x ea. ø 6.3 x ea. ø 6.3 x ea. ø 6.3 x ea. Deep countersunk head Deep countersunk head Pozidrive screw Steel, galvanised Dimensions mm Order no. PU ø 6.3 x ea. ø 6.3 x ea. Handle fixing screws M4 thread Cross recessed head and double slot Steel, galvanised Length mm Order no. PU ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea

67 Screws Chipboard screws, special screws Panhead Panhead Pozidrive screw Steel, galvanised Dimensions mm Order no. PU ø 3.5 x ea. ø 3.5 x ea. ø 4 x ea. Countersunk head Countersunk head Pozidrive screw Steel Dimensions mm Finish Order no. PU ø 3.5 x 12 nickel plated ea. ø 3.5 x 12 galvanised ea. ø 3.5 x 13 nickel plated ea. ø 3.5 x 16 nickel plated ea. ø 3.5 x 9.5 nickel plated ea. ø 4 x 16 nickel plated ea. Special screw, ø 5 mm ø 5 mm For attaching the drawer front panel Pozidrive screw Steel, galvanised Length mm Order no. PU ea ea. Special screw, ø 6.3 mm ø 6.3 mm For attaching the drawer front panel For 5 mm ø drilling Pozidrive screw Steel, galvanised Length mm Order no. PU ea ea. Rear panel screw 3 x 20 mm ø 3 x 20 mm For attaching the rear panel Pozidrive screw Steel, galvanised Order no. PU ea. Technik für Möbel 823

68 Screws Oval head screws Oval head screw M6 x 12 mm Pozidrive screw Steel, nickel plated Order no. PU ea

69 Cover caps For drilling diameters of 5, 8, 10 mm For drilling diameter of 5 mm ø 13 For drilling diameter of 5 mm Plastic 5,5 Colour Order no. PU white /1000 ea. brown /1000 ea. black /1000 ea. beige /1000 ea. grey /1000 ea. For drilling diameter of 8 mm ø 13 For drilling diameter of 8 mm Plastic 6,5 Colour Order no. PU white /1000 ea. brown /1000 ea. beige /1000 ea. black /1000 ea. grey /1000 ea. For drilling diameter of 10 mm ø 13 For drilling diameter of 10 mm Plastic 6,5 Colour Order no. PU white /1000 ea. brown /1000 ea. grey /1000 ea. black /1000 ea. beige /1000 ea. Technik für Möbel 825

70 Adjustment systems for seating and beds More functions more buyers. ich makes seating and beds even more comfortable and convenient. And more attractive to furniture buyers. ich adjustable fittings bring many additional and innovative benefits to easy chairs, sofas and beds. For example, variable positions for seats, back and arm rests. Our wide choice of fittings lets you provide upholstered furniture and beds with a host of adjustment functions. Added convenience for slatted bed bases: the Rastomat telescopic fitting engages head and foot board at any setting without having to return to the home position. Extra shallow: MultiFlex is the adjustable fitting with an extremely shallow installed height. Quickly hooks into place for easy installation. For multifunctional upholstered furniture: the FrankoFlex neck and arm rest adjuster conveniently adjusts in steps

71 Adjustment systems for seating and beds Summary Connecting fittings for beds Bed connecting fitting with hook, angled bed fitting, StabiloFix, VariFix, supporting leg for centre rail and connector for centre rail Adjustment fittings for beds Rastomat, MultiFlex, touch activated opening fitting, bed frame wheel Neck and arm rest adjuster for seating and beds FrankoFlex 835 SchwenkFix lid fitting for installation in chests and corner benches 835 Technik für Möbel 827

72 Connecting fittings for beds Bed connecting fitting with hook Bed connecting fitting 130 mm Hook component with 3 hooks Tried and proven sturdy fitting for hook in assembly Steel, galvanised Set comprises: 2 hook-in parts, right 2 hook-in parts, left 4 universal caps left / right Order no. PU /10 pair 8 Head board / foot board 35 5,7 ø 4 x ø 4 x 17 Side panel 15 5, Bed connecting fitting 100 mm Hook component with 2 hooks Particularly suitable for narrow sided beds Steel, galvanised Set comprises: 2 hook in parts, right 2 hook in parts, left 4 universal caps left / right Order no. PU /10 pair Head board / foot board ø 4 x , , ø 4 x 17 Side panel 8,5 5 5,

73 Connecting fittings for beds Angle bed fitting Angled bed fitting 127 mm Offset screw holes, in 32 mm hole line system Complete with M6 x 13 sockets and M6 x 12 screws Steel, galvanised Order no. PU /40 ea. 13,5 ø ,5 18, , ,2 13,5 21,5 5,5 30 Angled bed fitting 226 mm Screw holes in 32 mm hole line system Particularly suitable for high sided beds Complete with M6 x 13 sockets and M6 x 12 screws Steel, galvanised Order no. PU /40 ea. ø , ,2 13, , Technik für Möbel 829

74 Connecting fittings for beds StabiloFix, VariFix StabiloFix For knock down sprung beds or underbed storage boxes High strength Tightening screw compensates for tolerances of up to 4 mm Steel, galvanised Order no. PU /40 ea. Head board / foot board 18, , , Side panel 5,3 VariFix For single and double beds Also suitable for double beds with centre support rail The height of the supports for slatted mattress bases or upholstery can be adjusted in 3 stages of 24 mm each Steel, galvanised Load capacity 400 kg / ea. Order no. PU /40 ea ,2 * Offset for centre rail measuring 35 mm thick 12 * 139, Support for bed frame Support for centre rail 830

75 Connecting fittings for beds VariFix Supporting leg and connector for centre rail Supporting leg for centre rail Adjustment by hand or screwdriver Inserts into hole drilled in centre rail Plastic, black Load capacity 450 kg / ea. Dimension X mm Adjustment mm Order no. PU / /20 ea / /20 ea / /20 ea. VariFix Centre rail ø 35 Hole size 25 Supporting leg x + - Centre rail connector For wooden or metal beds Can also be used for sprung beds Width of the centre rail over 70 mm Steel, galvanised Load capacity 100 kg / ea. Order no. PU /40 ea. Head board / foot board ,5 38,5 ø 6, ,5 Centre rail mm wide 8 ø 5 18, Technik für Möbel 831

76 Adjustment fittings for beds Rastomat Rastomat Adjustable fitting for head and foot ends Also suitable for height adjustable desktops, deck chairs and all types of flaps The fitting engages in any notch without having to return to the home position Rugged construction Safety feature prevents over extension The spacer disks required are included in the pack Steel, galvanised Load capacity 180 kg / ea. Number of notches Order no. PU /10 ea /10 ea mm for 5 notches mm for 10 notches ø 8, ø 6 Spacer disc Inner frame X 9,5 12 Outer frame M 6 Dimension x mm Position of notches Dimension x mm for articles with 5 notches 1 R R R 355 Dimension x mm for articles with 10 notches 832

77 Adjustment fittings for beds MultiFlex MultiFlex Adjustable fitting for head and foot ends 13 engagement positions Extremely compact design Easy, fast installation Steel, galvanised Load capacity 140 kg / ea. Order no. PU /4 ea. X Space X mm Position Stop mm 332 (max. opening) Space X mm Technik für Möbel 833

78 Adjustment fittings for beds Touch activated opening fitting, bed frame wheel Touch activated opening fitting for single beds, bunk beds and sprung beds All riveted connections with washers for stability Spring force assists the swing action Weight of mattress base including mattress 25 kg Design inset constructions so that the support rests on the substructure on all 4 sides A plastic fitting cover protects the bed linen in the underbed box Only available as a pair comprising one left-hand and one right-hand fitting With 4 tension springs per set Steel, galvanised Order no. PU pair ø 6, ~ ø 6,2 ø 6,2 Bed frame wheel Large size wheel diameter with wide tread Plastic, white Can be fitted with VS connecting screws, please order separately Page reference: For VS connecting screws, see page 818 Order no. PU /40 ea. 84,5 9,5 11,5 ø 8,

79 Neck and arm rest adjuster for seating and beds / lid fitting FrankoFlex, SchwenkFix FrankoFlex 10 engagement positions Adjustment range of 90 Engages every 9 for precision adjustability Can be mounted on either wood or tubular steel frames Fixing holes on the 32 mm hole line system Slim-line, narrow design for mounting versatility Enclosed design ensures functional safety Steel, galvanised Load capacity 220 Nm / ea. Basic position in Order no. PU /10 ea. Changeover notch Raste 45 1ste arrêtering ø 6, ø FrankoFlex Basic position ø 6,2 SchwenkFix For chests and corner benches Opening angle 95 The fitting lifts up far enough to keep the lid standing upright in the open position Suitable for upholstery up to 50 mm thick Keyholes in the mounting angle make it easy to hook in and align the lid when installation Only available as a pair comprising one left-hand and one right-hand fitting Steel, galvanised Order no. PU /10 pair Technik für Möbel 835

80 Plinth adjustment fittings Standing firmly. Give furniture a solid foundation to stand on with high-quality, robust plinths from ich. Durable quality materials and sturdy constructions guarantee high load capacity. ich plinth height adjustment legs make sure your furniture stands firmly. Permanently. Each with a load capacity of up to 450 kg: the Korrekt is fixing bock, height adjustable leg and plinth clip all in one. Simple adjustment by hand or screwdriver. Sturdy quality in steel: galvanised steel leveller screw. With foot cap made of transparent plastic

81 Plinth adjustment fittings Summary Korrekt height adjustable leg with fixing blocks and accessories Euro height adjustable leg with fixing blocks and accessories Height adjustable leg with mount for plinth drawer Systema Top 2000 plinth adjustment fitting for office furniture Leveller screws Technik für Möbel 837

82 Height adjustable leg Korrekt Levelling foot Korrekt levelling foot Fitting system comprising levelling feet, fixing blocks, plinth clips and other accessories Load capacity per leg 450 kg, maximum of 1350 kg for 3 or more legs Levelling foot is held securely in the fixing block when installing and repositioning the cabinet Large contact surface of ø 78 or 80 mm Simple height adjustment Plinth drawers can be fitted from a plinth height of 150 mm Plastic, black Plinth height dimension X mm Adjustment range mm Floor contact surface ø mm Order no. PU /200 ea /100 ea /200 ea /100 ea /100 ea /100 ea /100 ea /100 ea /100 ea. 39,5 ø 8 40 X 40 ø

83 Height adjustable leg Korrekt Adapter, fixing block Adapter for levelling foot For extending the levelling foot by 50 mm Plastic, black Order no. PU /40 ea. X + 50 Universal fixing block, for screwing on Plastic, black 95 Order no. PU /200 ea. ø 4 x 35 23, Universal fixing block, for pressing in, with 4 dowels ø 10 x 11,5 With integrated mount for plinth clip (order no , please order separately) Plastic, black Page reference: For plinth clip, see page Order no. PU /40 ea. Universal fixing block, for pressing in, with 2 dowels ø 15 x With integrated mount for plinth clip (order no , please order separately) Plastic, black Page reference: For plinth clip, see page , Order no. PU /40 ea. Technik für Möbel 839

84 Height adjustable leg Korrekt Fixing block Universal fixing block, for knocking in, with 2 expanding dowels ø 15 x x 45 Can additionally be secured with screws Can be removed by pulling out the expanding dowels With integrated mount for plinth clip (order no , please order separately) With surface to support side panel Plastic, black 39, Page reference: Panel clip, see page 841 Order no. PU /40 ea. Planform fixing block, for knocking in, with 3 expanding dowels 8 x 45 ø 10 x Also suitable for angled and round plinths Can additionally be secured with screws Can be removed by pulling out the expanding dowels With integrated mount for plinth clip (order no , please order separately) Drawing shows version with support surface Plastic, black Page reference: For plinth clip, see page Type Order no. PU without support surface /200 ea. with support surface /200 ea. Planform fixing block, for screwing on 8 x 45 ø 4 x Also suitable for angled and round plinths With integrated mount for plinth clip for plinth panels With surface to support side panel Plastic, black Order no. PU /200 ea

85 Height adjustable leg Korrekt Plinth clip Plinth clip for Universal fixing block Plinth clip for Planform fixing block 37 For front plinth panels, material thickness mm Panel must be 4 mm lower than height of plinth Can be used in conjunction with pressing in / knocking in Universal fixing block and Euro fixing block for screwing on, please order separately plinth clip is clipped onto the front plinth panel and pushed sideways into the fixing block for installation Plastic, white Page reference: For Universal fixing block, see page For Euro fixing block for screwing on, see page 844 Order no. PU /40 ea. For front and side plinth panels,, material thickness 19 mm Plinth panel must be 4 mm lower than height of plinth Suitable for use with Planform fixing block, please order separately plinth clip is pushed into the fixing block and the plinth panel subsequently clamped Plastic, white Page reference: For Planform fixing block, see page 840 Order no. PU /200 ea. Plinth clip for clipping onto levelling foot 3,2 1 Plinth 6,3 For front and side plinth panels Installation: clipping onto levelling foot Suitable for plinth heights of 70 mm and over Plastic, black Type Order no. PU 1 for slotting in /200 ea. 2 for screwing on /200 ea. TurboClip plinth clip For front and side plinth panels, min. material thickness 12 mm For knocking in Plinth panel must be 2 mm lower than height of plinth Installation: plinth is clamped below the carcase The back of the plinth panel must rest against the fixing block and levelling foot at the top and bottom Chrome plated steel Type Order no. PU 1 for front plinths /20 ea. 2 for side plinths /20 ea. Technik für Möbel 841

86 Height adjustable leg Korrekt Clip for plinth drawer Clip for plinth drawer ,5 22 internal cabinet width Clip for connecting plinth drawers to FR 402 / 602 drawer runners, please order separately Suitable for plinth heights of 150 mm and over The runners are mounted to the clips and then clipped onto the levelling feet The height of the drawer off the floor always remains the same even if plinth height is adjusted Plastic, black Page reference: For FR 402 / 602 drawer runners, see Furniture Fittings and Applications catalogue 2016, volume 1, chapter FR roller runners Order no. PU /20 ea

87 Height adjustable leg Euro Levelling foot, adapter, fixing block Euro levelling foot X Fitting system comprising levelling feet, fixing blocks and other accessories Load capacity 450 kg / leg, maximum of 1350 kg for 3 or more legs Leg is securely held in the fixing block, simple height adjustment Plinth drawers can be fitted from a plinth height of 150 mm Plastic, black ø 50 Plinth height dimension X mm Adjustment range mm Order no /40 ea /40 ea /40 ea /40 ea. PU Adapter for levelling foot For extending the levelling foot by 50 mm Plastic, black Order no. PU /40 ea. X + 50 Fixing block, for screwing on 7 x 45 ø 50 ø 4 x With surface to support side plinth panel Plastic, black Order no. PU /40 ea. 25 ø Technik für Möbel 843

88 Height adjustable leg Euro Fixing block Fixing block, for pressing in 7 x 45 ø 25 ø With surface to support side plinth panel Plastic, black Order no. PU /40 ea. 25 ø Fixing block, for screwing on 7 x ø 4 x With integrated mount for plinth clip (order no , please order separately) With surface to support side plinth panel Plastic, black Page reference: For plinth clip, see page 844 Order no. PU /40 ea. Plinth panel holder, screw-on type ø 4 x 7 For front and side plinth panels Installation: clipping onto levelling foot Plastic, black Order no. PU /40 ea. Plinth clip For front plinth panels, material thickness mm Plinth panel must be 4 mm lower than height of plinth Suitable for use with fixing block order no , see above Plastic, white Order no. PU /40 ea

89 Height adjustable leg Euro Clip for plinth drawer Clip for plinth drawer internal cabinet width Clip for connecting plinth drawers to drawer runners, FR 302 / 402 / 602, please order separately Suitable for plinth heights of 150 mm and over The runners are mounted to the clips and then clipped onto the levelling feet The height of the drawer off the floor always remains the same even if plinth height is adjusted Plastic, black Page reference: For drawer runners FR 302 / 402 / 602, see Furniture Fittings and Applications catalogue 2016, volume 1, chapter FR roller runners Order no. PU /20 ea. Technik für Möbel 845

90 Height adjustable leg With mount for plinth drawer Height adjustable leg with mount for plinth drawers Perfect combination of height adjustable leg and mount for plinth drawer Can be used with drawer runners: - Actro with Silent System, please order separately - Quadro 25 and Quadro V6, please order separately Suitable for plinth heights of 150 mm and over Simple height adjustment Plinth drawer runs parallel with carcase above it Runner can be fitted at a later stage Installed height can be adjusted at 5 mm intervals Can be installed between all cabinets even if adjacent unit is a corner unit or oven unit Load capacity levelling foot 75 kg / ea. Drawer with 30 kg max. load capacity Aluminium profile can be shortened Set comprises: 4 levelling feet, bright aluminium 2 runner profiles, steel Fixing material Page reference: See Furniture Fittings and Applications catalogue 2016, volume 1, chapter double walled drawer system ArciTech, for Actro with Silent System InnoTech Atira, for Quadro 25 InnoTech Atira, for Quadro V6 Plinth height mm Adjustment range mm Order no. PU set Installation

91 Height adjustable leg With mount for plinth drawer Installation dimensions 19 Quadro EB 9,5 19 Actro for panel thickness 19 mm ø 5, EB 12,5 16 for panel thickness 16 mm 18 EB 10,5 18 for panel thickness 18 mm x EB 12,5 16 for panel thickness 16 mm Stop required for drawer front EB 12,5 16 for panel thickness 16 mm Y 37 Plinth height Flush fit 16 EB 12,5 16 for panel thickness 16 mm Leveller screw Installation dimensions X 6 X 4 X 5 X 2 X 3 X 1 Quadro Y Actro With ArciTech, height 94 mm: fixing point X 4 - X 6 usable With ArciTech, height 126 mm: fixing point X 4 - X 5 usable With InnoTech, height 70 mm: fixing point X 1 - X 6 usable Y Fixing point Dimension Y for 150 mm plinth height X X X X X X Technik für Möbel 847

92 Plinth adjustment fitting Systema Top 2000 For side panel Plinth adjustment fitting Systema Top 2000 for side panel For cabinets with a plinth height of at least 60 mm, continuous side panel or separate plinth Particularly suitable for office cabinets, partitions and wall-to-wall units Adjustment range mm or mm Height can be adjusted through the bottom panel (4 mm AF) Easy installation in System 32 in combination with eccentric cam connecting fittings VB 20 / 21, see page Adjustment can be made through the connecting fitting The plinth clip is designed for a space of 37 mm from plinth rear face to spindle centre The groove for the clip in the front plinth is positioned for the centre of the housing. However, the clip can also be used at any other height position within the housing, see drawing The plinth adjustment fitting has a load capacity of 300 kg / each, 900 kg max. for three or more legs The direct spindle guide inside the housing makes sure furniture stands firmly Since the plinth adjustment fitting is symmetrical, it can be used on the left or right Can be used in System 32 Steel, white plastic Adjustment range mm Order no. PU /100 ea /100 ea. 12,8 SW ø 10 15, SW 4 13 ø ø ø 4,5 x ø

93 Plinth adjustment fitting Systema Top 2000 For centre panel Plinth adjustment fitting Systema Top 2000 for centre panel For cabinets with a plinth height of at least 60 mm, continuous side panel or separate plinth Particularly suitable for office cabinets, partitions and wall-to-wall units Adjustment range mm or mm Height can be adjusted through the bottom panel (4 mm AF) Easy installation in System 32 in combination with eccentric cam connecting fittings VB 20 / 21, see page Adjustment can be made through the connecting fitting The plinth clip is designed for a space of 37 mm from plinth rear face to spindle centre The groove for the clip in the front plinth is positioned for the centre of the housing. However, the clip can also be used at any other height position within the housing, see drawing The plinth adjustment fitting has a load capacity of 300 kg / each, 900 kg max. for three or more legs The direct spindle guide inside the housing makes sure furniture stands firmly Since the plinth adjustment fitting is symmetrical, it can be used on the left or right Can be used in System 32 Steel, white plastic Adjustment range mm Order no. PU /100 ea /100 ea SW ø ø 4 x ø 46 ø 46 Technik für Möbel 849

94 Leveller screws M8 thread Accessories Leveller screw with M8 thread ø 30 ø 32 M X With foot cap Steel, galvanised / clear plastic Dimension X mm Order no. PU /50 ea /50 ea /50 ea /50 ea /50 ea. Captive nut with M8 thread M 8 ø 22 ø 9,5 Steel, bright Order no. PU /50 ea. Supporting plate with M8 thread 5, M Steel, galvanised Order no. PU /50 ea. Metal angle with M8 thread 5, ,5 ø 12,4 ø 5, M ,5 Steel, galvanised Order no. PU /50 ea /250 ea

95 Leveller screws M8 thread, M10 thread Accessories Adjustment fitting for cabinets with blind panels M 8 ø 9, The fitting allows a cabinet with blind panel to be braced and horizontally aligned between floor and ceiling Steel, galvanised Page reference: For drill bits for upright and hand drills, see page Order no. PU 4 ø 20 ø /20 ea. Leveller screw with M10 thread M 10 For aligning shelf units, room dividers and partitions With adjustment nut and steel foot Steel, galvanised ø 4,5 SW Order no. PU /50 ea. 35 ø 47 Leveller screw with M10 thread M 10 For aligning shelf units, room dividers and partitions With adjustment nut and impact resistant plastic foot Steel, galvanised, black plastic SW Order no. PU /50 ea. ø 45 Tube cap with M10 thread For 30 x 30 x 2.5 mm square tubes Zinc die-cast 5 22,5 Order no. PU /50 ea. Technik für Möbel 851

96 Shelf supports / rails and brackets Some ich shelf supports can do more than just support shelves: for example, they prevent shelves from being accidentally lifted or pulled forward and from tipping or slipping. A minor detail that can prevent a major disaster from happening. This is where you will find the right supports and holders for any fitted cupboard. Firm and secure support elements for your shelf. And a reliable and easy to fit solution for any design of furniture. Sekura 2 shelf support in nickel plated die-cast zinc. Vari shelf support rail, aluminium, for slotting in. Titan shelf support for concealed installation behind the shelf. TT shelf support for mounting shelves on the wall

97 Shelf supports / rails and brackets Summary Shelf supports Safety, Sekura, Universal D, Universal K, Duplo, push in shelf supports, Glass shelf supports, flattened shelf supports, grooved shelf supports, Shelf studs Shelf support rails for recessing into the carcase side Vari aluminium, Vari steel 859 Shelf supports, pull-out shelf supports for supporting shelves, for mounting on walls Titan 1 with side adjustment, Titan 1, Titan 2, Titan 3, pull-out shelf support TT Technik für Möbel 853

98 Shelf support Safety, Sekura Safety 4 ø 3 / 4 / 5 / 6 8 Steel pin with plastic support surface Can be used in System 32 Load group L 50 (50 kg/m²) Drilling diameter mm Colour Order no. PU 3 translucent /500 ea. 4 translucent /500 ea. 5 translucent /500 ea. 5 white /500 ea. 5 brown /500 ea. 6 translucent /500 ea. Sekura 1.1 7,5 ø 5 10 ø 5 Pin diameter 5 mm 1 additional pin for shelf Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel-plated 5 8 Order no. PU /500 ea. Sekura 2 ø 5 Pin diameter 5 mm Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel-plated 5 Order no. PU /500 ea. Sekura 2.1 ø 5 Pin diameter 5 mm Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel plated 5 Order no. PU /500 ea

99 Shelf support Sekura Sekura 6 12 ø 5 12,5 ø 5 8 Pin diameter 5 mm 1 additional pin for shelf Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel plated 8 Order no. PU /500 ea. Sekura 7 ø 5 12, ø 5 Drilling diameter 5 mm for direct fixing screw, Countersunk head, ø 6.3 mm Drilling diameter 3 mm for countersunk head screw ø 4 mm Each with one additional pin for shelves Zinc die-cast nickel plated Can be used in System 32 Load group L 75 (75 kg/m²) ø 5 12 Drilling diameter mm Order no. PU 12,5 8 ø /500 ea /500 ea. Universal K ø 5 Pin diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Plastic white 7 Order no. PU /500 ea. Universal D Pin diameter 5 mm Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel-plated 2 ø 5 8 Order no. PU /500 ea. Technik für Möbel 855

100 Shelf support Duplo Duplo ø 5 0,5 ø 5 8 Pin diameter 5 mm on both sides Steel Can be used in System 32 Load group L 50 (50 kg/m²) Finish Order no. PU nickel plated /500 ea. galvanised /500 ea. Push in shelf supports 2,5 24 ø 5 Drilling diameter 5 mm Can be used in System 32 Load group L 50 (50 kg/m²) Steel, galvanised Order no. PU /500 ea. Push in shelf supports with shoulder 3,75 8 ø 5 Pin diameter 5 mm Can be used in System 32 Load group L 50 (50 kg/m²) Steel, galvanised Order no. PU /500 ea. Sekura ø 5 Glass shelf supports Pin diameter 5 mm Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel plated / clear plastic Order no. PU /500 ea

101 Shelf support Glass shelf supports Alfa Glass ,9 ø Quick locking shelf support for glass shelves For glass thicknesses 8-12 mm Drilling diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Zinc die-cast nickel plated Order no. PU /500 ea. Glass shelf supports ø 3 / 5 8 With soft plastic cap Load group L 50 (50 kg/m²) Steel, galvanised / clear plastic Drilling diameter mm Order no. PU /500 ea /500 ea. Glass shelf supports in plastic 6 2,5 7,5 ø 5 With tilt prevention Pin diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Plastic translucent Order no. PU /500 ea. Glass shelf supports 4-6 3,6 8 ø 5 For glass thicknesses 4-6 mm With tilt prevention Drilling diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Zinc die-cast nickel plated / clear plastic Order no. PU /500 ea. Technik für Möbel 857

102 Shelf support Flattened shelf supports Flattened shelf supports 8 ø 5 Drilling diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Steel, galvanised Order no. PU /500 ea. Grooved shelf supports 8,5 8 ø 5 For grooved bottom panels Pin diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Zinc die-cast, bright Order no. PU /500 ea. 8 Shelf studs ø 5 Pin diameter 5 mm Can be used in System 32 Plastic translucent Order no. PU /500 ea

103 Shelf support Shelf support rails Vari, aluminium, Vari, steel Vari shelf support rail, aluminium, 11 x 6 mm Standard length: 3500 mm Aluminium Load group L 50 (50 kg/m²) Article version Finish Order no. PU Shelf support bright /250 ea. 12,9 5,6 Groove 11 x 6 mm 18 Shelf support gold look /250 ea. Rail bright ea. Rail gold look ea. 10 Vari shelf support rail, steel, 10 x 5 mm 6 8, , x 15 mm 1 Standard length: 3500 mm Load group L 50 (50 kg/m²) Steel Article version Finish Order no. PU Shelf support brass plated /250 ea Shelf support galvanised /250 ea. Rail brass plated ea. Rail nickel plated ea. Vari shelf support rail, steel, 16 x 6 mm 8,5 9, x 14 mm 1, ,5 25,5 11,5 Standard length: 3500 mm Load group L 50 (50 kg/m²) Steel Article version Finish Order no. PU Shelf support brass plated /250 ea. Shelf support galvanised /250 ea. Rail brass plated ea. Rail nickel plated ea. 14 Technik für Möbel 859

104 Shelf support Titan 1 with side adjustment Titan 1 with side adjustment Concealed installation behind the shelf Bolt: 10 mm AF Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm, 100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm Height adjustment: ± 4 mm Side adjustment ± 4 mm Minimum shelf thickness: 24 mm Adjustment of shelf tilt Steel, galvanised Page reference: For fixing screws (order no ), see page 882 Order no. PU /20 ea % 25 % ± ± % SW ø 5,5 x 50 Titan 1 Concealed installation behind the shelf Bolt: 10 mm AF Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm, 100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm Height adjustment: ± 4 mm Minimum shelf thickness: 24 mm Adjustment of shelf tilt Steel, galvanised Page reference: For fixing screws (order no ), see page 882 Order no. PU /20 ea % 25 % ± % ø 5,5 x 50 SW

105 Shelf support Titan 3 Titan 2 Concealed installation behind the shelf Bolt: 12 mm ø Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm, 100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm Height adjustment: ± 4 mm Minimum shelf thickness: 24 mm Adjustment of shelf tilt Steel, galvanised Page reference: For fixing screws (order no ), see page 882 Order no. PU /20 ea % 25 % 20 12, ± % ø 5,5 x 50 Titan 3 Concealed installation behind the shelf Bolt: 12 mm ø Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm, 100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm Height adjustment: ± 2 mm Minimum shelf thickness: 19 mm Adjustment of shelf tilt Steel, galvanised Page reference: For fixing screws (order no ), see page 882 Order no. PU /20 ea , ± % 25 % 25 % ø 5,5 x Technik für Möbel 861

106 Shelf support Titan Load capacity of shelf supports 25 % 50 % 25 % Max. shelf depth mm Shelf width 1000 mm kg/m² * kg/m² * kg/m² * *Load capacity including weight of shelf Please note: The special purpose screws we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. Special mounting elements available on the market are required for attachment to other wall materials

107 Shelf supports and pull-out shelf supports Shelf supports, pull-out shelf supports, TT Shelf support Shelf support mount with tilt compensator For concealed installation behind the shelf On walls of corresponding quality and with a maximum distance of 600 mm between supports, as well as shelf dimensions of 1000 x 350 mm, the max. load equals 50 kg/m² Steel, galvanised The material quality and condition of walls, supports and attachment are beyond our control. These must be reconciled with the load capacity. Set comprises: 2 shelf supports Order no. PU set ø 20 Pull-out shelf support TT Shelf support mount for shelves Stainless steel look The material quality and condition of walls, supports and attachment are beyond our control. These must be reconciled with the load capacity. Set comprises: 2 pull-out shelf supports Finish / colour Order no. PU Stainless steel look set kg kg Technik für Möbel 863

108 Cabinet suspension brackets and suspension rails Making sure cabinets hang securely: cabinet suspension brackets from ich. High quality materials, high quality finish. Here too, the ich range provides all the options: For screwing on or pressing in, for fitting inside the cabinet or on the back of the rear panel. All models are easy to fit and adjust. Cabinet suspension bracket SAH 130, for pressing in. 3-D adjustment for precision alignment of the cabinet. Sleek, aesthetically pleasing design for an attractive look down to every last detail. Cabinet suspension bracket SAH 215 / 216 for use on the back of the rear panel. With precision 3-D adjustment. When mounted on rails, cabinets can be prevented from lifting off. The SAH 305 cabinet suspension bracket is invisibly recessed into the rear panel

109 Cabinet suspension brackets and suspension rails Summary Cabinet suspension brackets Range summary / Technical comparison Cabinet suspension brackets for use behind the rear panel SAH 215 and SAH Cabinet suspension brackets for use inside the carcase SAH 130, SAH 116 and SAH Cabinet suspension brackets for use in the rear panel SAH Spacers 879 Suspension rails / Fixing material Technical information Note on the load capacity of cabinet suspension brackets Technik für Möbel 865

110 Cabinet suspension brackets Range summary / Technical comparison SAH 215 SAH 216 SAH 130 Page Installation For screwing on On the back of the rear panel For screwing on On the back of the rear panel For pressing in In the carcase Load capacity 45 kg / ea. according to EN kg / ea. according to EN kg / ea. according to EN Suspension bracket Suspension hook Suspension rail, type B Suspension hook Suspension rail, type B Suspension hook Suspension rail, type B Suspension rail, type L Adjustment range Height Depth Lateral for hook suspension Lateral for rail suspension ± 8 mm 25 mm max. ± 3 mm ± 7.5 mm ± 8 mm 25 mm max. ± 3 mm ± 7.5 mm ± 7 mm 15 mm max. ± 3 mm ± 7 mm Rear panel recess 16 mm min. (from rear edge of rear panel) 16 mm min. (from rear edge of rear panel) 16 mm min. (from front edge of rear panel) 866

111 Cabinet suspension brackets Range summary / Technical comparison SAH 15 SAH 116 SAH For screwing on In the carcase For screwing on In the carcase For pressing in In the rear panel 30 kg / ea. according to EN kg / ea. according to EN kg / ea. according to EN Suspension hook Suspension rail, type B Suspension rail, type L Suspension hook Suspension rail, type B Suspension rail, type L Suspension hook - 2 /+ 9 mm - 2/+ 17 mm ± 6 mm ± 7 mm ± 7 mm 15 mm max. ± 3 mm ± 7 mm - - ± 8 mm - 15 mm min. (from front edge of rear panel) 16 mm min. (from front edge of rear panel) - Technik für Möbel 867

112 Cabinet suspension brackets SAH 215 For installation on the back of the rear panel Cabinet suspension bracket SAH 215 For use on the back of the rear panel For rail and hook suspension Load capacity 45 kg / each (to EN 15939/2012) Attached to side panel with 3 side dowels and screwed down in the rear panel groove Suitable for use with rear panel recess of 16 mm and over Fast, easy height adjustment by means of sturdy adjustment screw and gear: ± 8 mm Depth adjustment: 25 mm max. Side adjustment: ± 3 mm for hook suspension Adjustment screws are protected from becoming unscrewed accidentally Lift off height: 7.5 mm Hook suspension: the shape of the hook prevents the cabinet from slipping off Suitable for use with B type suspension rail Steel, galvanised - fully recyclable MUST ALWAYS be screwed into the carcase side. Optional "lift off guard" function by means of special screw Page reference: For SAH 215 cover caps, see page 870 Order no. PU /25 pair SAH 215 Lift off guard Max. depth adjustment 25 mm ± 9 mm height adjustment by means of gear For attachment to cabinet side using 3.5 x 20 mm chipboard screw Fitting options Please note: Unless attached to top panel, the SAH 215/216 must be mounted within the top third of the carcase. Adjust height before depth

113 Cabinet suspension brackets SAH 215 Installation ø 15 / 12 1/ , / ø 10 12,5! M4 x 11 ø 3,5 x , ,5 16 Technik für Möbel 869

114 Cabinet suspension brackets SAH 216 For installation on the back of the rear panel Cabinet suspension bracket SAH 216 For use on the back of the rear panel For rail and hook suspension Load capacity 55 kg/each (to EN 15939/2012) Attached to side panel with 3 side dowels and screwed down in the rear panel groove Suitable for use with rear panel recess of 16 mm and over Fast, easy height adjustment by means of sturdy adjustment screw and gear: ± 8 mm Depth adjustment: 25 mm max. Side adjustment: ± 3 mm for hook suspension Adjustment screws are protected from becoming unscrewed accidentally Lift off height: 7.5 mm Hook suspension: the shape of the hook prevents the cabinet from slipping off Suitable for use with B type suspension rail Steel, galvanised - fully recyclable MUST ALWAYS be screwed into the carcase side and in the top panel. Optional "lift off guard" function by means of special screw Page reference: For SAH 216 cover caps, see below Order no. PU /25 pair SAH 216 for use on top panel For attachment to cabinet side using 3.5 x 20 mm chipboard screw For attachment to top panel using 3.5 x 30 mm chipboard screw Lift off guard Max. depth adjustment 25 mm ± 9 mm height adjustment by means of gear For attachment to cabinet side using 3.5 x 20 mm chipboard screw Caution At least two screws are required for SAH 216 (fitted diagonally at the bottom and straight or diagonally at the top). Cover caps for SAH 215 / SAH 216 Plastic Colour Order no. / Drilling diameter mm PU grey /50 ea. white /50 ea

115 Cabinet suspension brackets SAH 216 Installation ø 15 / 12 1/ , / ø 10 12,5 8! M4 x 11 ø 3,5 x 30 ø 3,5 x 20 ø 3,5 x ,5 12, ,5 12, Technik für Möbel 871

116 Cabinet suspension brackets SAH 130 For installation in carcase Cabinet suspension bracket SAH 130 For pressing in For rail and hook suspension Guard to prevent slipping off sideways when suspended from a hook Load capacity 35 kg / each in accordance with EN in test rack A (one pair of SAH per carcase; elements without own suspension, such as end shelves, are not permitted) 3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm Rear panel recess (to front edge of rear panel) at least 16 mm Lift off height 7.5 mm Suitable for use with B type and L type suspension rails Steel, galvanised / white plastic Depth adjustment distance Order no. PU SAH 130 T19* /25 pair *Hook's factory setting, measured from housing rear to end of hook Cover caps for SAH 130 Cover caps for SAH 130 For pushing onto the cabinet suspension bracket Plastic Colour Order no. PU mid brown /25 pair silver grey /25 pair white /25 pair 872

117 Cabinet suspension brackets SAH 130 Installation SAH , , ,5 ø 10 ø ±7 15 SAH , , , ,5 32 Technik für Möbel 873

118 Cabinet suspension brackets SAH 15 For installation in carcase Cabinet suspension bracket SAH 15 For screwing on For rail and hook suspension Guard to prevent slipping off sideways when suspended from a hook Load capacity 30 kg / each in accordance with EN in test rack A (one pair of SAH per carcase; elements without own suspension, such as end shelves, are not permitted) 3-dimensional alignment: height -2/+9 mm, depth -2/+18 mm, laterally (for hook suspension) ± 6 mm / laterally (for rail suspension) ± 7 mm Rear panel recess (to front edge of rear panel) at least 15 mm Lift off height 6 mm Suitable for use with B type and L type suspension rails Steel, galvanised / white plastic Depth adjustment distance Order no. PU SAH 15 T16* /25 set *Hook's factory setting, measured from housing rear to end of hook Cover caps for SAH 15 For pushing onto the cabinet suspension bracket Plastic white / metal nickel plated Finish / colour Order no. PU white /25 set nickel plated /25 set 874

119 Cabinet suspension brackets SAH 15 Installation EN (2012) 300 N 300 N 8,5 ø H T = T < H R 7 ø 3,5 x ø 3,5 x Technik für Möbel 875

120 Cabinet suspension brackets SAH 116 For installation in carcase Cabinet suspension bracket SAH 116 For screwing on Rail or hook suspension Guard to prevent slipping off sideways when suspended from a hook Load capacity 40 kg / each in accordance with EN in test rack A (one pair of SAH per carcase; elements without own suspension, such as end shelves, are not permitted) 3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm Rear panel recess (to front edge of rear panel) at least 16 mm Lift off height 7.5 mm Suitable for use with B type and L type suspension rails Steel, nickel plated Article version Depth adjustment distance Order no. PU SAH T /25 pair *Hook's factory setting, measured from housing rear to end of hook 876

121 Cabinet suspension brackets SAH 116 Installation SAH X = 6, ±7 15 ø 4 x 16 SAH SAH SAH , ,5 32 Technik für Möbel 877

122 Cabinet suspension brackets SAH 305 For installation in rear panel Cabinet suspension bracket SAH 305 For pressing into 30 mm ø x 11.5 mm drilling Rear panel at least 16 mm thick Load capacity 15 kg each in accordance with EN in test rack A (one pair of SAH per carcase; elements without own suspension, such as end shelves, are not permitted) Lateral alignment ± 8 mm Suspension with suspension hook ø 6 x 50 mm Zinc die-cast, galvanised Order no. PU /100 ea. Installing SAH 305 ø 30 ±8 11,

123 Cabinet suspension brackets Spacers Spacers For depth compensation in the lower section of the rear panel Depth compensation from mm Self adhesive for easy installation; can be additionally secured by screws Plastic, black Order no. PU /100 ea ø Technik für Möbel 879

124 Cabinet suspension brackets Suspension rails Suspension rail, type L, snaps off For SAH 15, SAH 116, SAH 130 cabinet suspension brackets Load capacity 130 kg / cabinet Attachment: - with special screw, ø 5.5 x 50 mm, at the level of each cabinet suspension bracket - use special fixing screws, see page 882 Snaps off With oblong holes Steel, galvanised Order no. PU /200 ea , , ø 6,5 1,

125 Cabinet suspension brackets Suspension rails Universal suspension rail, type B For SAH 15, SAH 116, SAH 130, SAH 215 / 216 cabinet suspension brackets Load capacity 150 kg / cabinet Attachment: - with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket - an additional special screw ø 5.5 x 50 must be fitted in the centre behind each carcase over 900 mm wide - use special fixing screws, see page 882 With oblong holes Steel, galvanised Advice: Suspension rail without slip off protection; on adjusting the position of the wall unit it may slip off the suspension rail and fall! Custom lengths on request Length mm Order no. PU /50 ea. 50 4,5 1, , Technik für Möbel 881

126 Cabinet suspension brackets Fixing material Fixing material Suspension hook ø 6 x 50 mm Must be screwed into the wall plug to a depth of at least 40 mm Suitable hook driver to fit cordless screwdriver, see page 1223 Steel, galvanised Wall plug, ø 8 x 40 mm For use in solid brick, solid sand lime brick, concrete or engineering brick Commercially available purpose-made fixings must be used for other wall materials Plastic, white Set comprises: 100 suspension hooks and 100 wall plugs Order no. PU /100 set Fixing material Special screw ø 5.5 x 50 mm For mounting suspension rails For PZ2 screwdriver Steel, galvanised Wall plug, ø 8 x 40 mm For use in solid brick, solid sand lime brick, concrete or engineering brick Commercially available purpose made fixings must be used for other wall materials Plastic, white Set comprises: 100 special screws and 100 wall plugs Information on load capacity of cabinet suspension brackets and on accessories Order no. PU /100 set The following basic loading principles must be observed when using cabinet suspension brackets and accessories: Both the furniture design and the quality of the furniture's material and production are beyond our control. The quality and condition of wall materials are also beyond our control. The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm drilling must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall. Commercial type special mounting elements must be used for attachment to other wall materials. Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws. Mounting suspension rails: - with 2 special screws, ø 5.5 x 50 mm, at the level of each cabinet suspension bracket - above a carcase width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each carcase (type A, type B and type H). Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket

127 Cabinet suspension brackets Information on load capacity of cabinet suspension brackets and on accessories Technical information Quality that meets all the demands The quality of ich cabinet suspension brackets is monitored continuously. Indication of the load capacity makes it easier to choose the right suspension bracket. The stated load capacity has been checked in accordance with the requirements of EN All the tests to EN which are listed below are performed in a defined test frame. The diagrams below are merely intended as illustrations. Quality criteria Practically oriented load capacities Easy installation of the cabinet suspension bracket Large adjustment ranges for adapting to conditions prevailing on site Secure adjustment screws Suitable for use in combination with suspension hook and suspension rail Impact test Loading the cabinet with 140% of the permitted load capacity. A steel plate weighing 1.7 kg is toppled over onto the top panel ten times. Swivel test per door The hinged door of the loaded cabinet is opened and closed ten times with an additional weight of 30 kg. Overload test Loading the cabinet with 200% of the permitted load capacity over 7 days. Technik für Möbel 883

128 Buffers Inconspicuous, but indispensable: Buffers prevent the hinged door from closing against the carcase with a loud bang. Buffers let hinged doors close quietly. Whatever the need, you will always find the right buffer at ich. For sticking on, making them easy to fit

129 Buffers Buffer, self adhesive Plastic transparent 4 Diameter mm Total height mm Order no. PU ea. ø13 Buffer, self adhesive ø 11 5 Plastic transparent Diameter mm Total height mm Order no. PU ea ea. 8 ø 16 Technik für Möbel 885