Maximum Recommended Load (lbs.) Grounding Procedure. Short Regular Duty ALUMA-FORM Platforms (3 5-1/8 wide) PLATFORMS
|
|
- Bridget Shaw
- 6 years ago
- Views:
Transcription
1 PLATFORMS
2 Your best solution for supporting transformers, regulators and other heavy equipment! Aluma-Form established the platform performance standards for the industry! They are superior in every category, including cost savings. Savings begin with the initial purchase and installation and carry over in terms of maintenance and replacement savings year after year! The Aluma-Form Advantage PLATFORMS Easy and Safe to Install Lightweight, easy to handle extrusions permit assembly on the ground - without expensive equipment. Only minutes are required to assemble most models. The completed platform can be hoisted into position using ropes and pulleys. Lightweight design results in less physical strain to workmen. It s easy and safe! Instantly Adjustable Cross members of Aluma-Form platforms can be adjusted to equipment size and location while on the ground or in the air. Slotted I-beams permit platforms to be completed on the ground and lifted into position as a complete unit. Strength and Beauty High strength 6061-T6 aluminum alloy is used to obtain a high strength to weight ratio. This permits easier handling without sacrificing strength. The clean, uncluttered appearance of Aluma-Form platforms provides structures that are aesthetically pleasing. Maintenance Free Aluma-Form platforms provide a lifetime use without expensive repairs. The 6061-T6 aluminum alloy also provides corrosion resistance in chemical and coastal environments. Flexibility of Design Aluma-Form platforms are available in over 60 standard models to fit a wide range of applications. Need your platform custom designed? No problem just contact us or your local representative. Speed! With the best lead-times in the industry, Aluma-Form can deliver your platform when you need it! 1
3 Short Regular Duty Platforms Platform Only Nominal Catalog Number Span SPAL--6 6 feet SPAL feet SPAL--8 8 feet SPAL feet PLATFORMS Regular Duty Platforms Platform Only Platform with (1) Walkway* Platform with () Walkways* Nominal Extra Pole Kit Catalog Number Catalog Number Catalog Number Span Catalog # PAL-1 PCAL-1 PCAL-1 1 feet Extra Pole PAL-14 PCAL-14 PCAL feet Kit R.D. PAL-16 PCAL-16 PCAL feet Regular Duty Platforms for 3 poles Platform Only Platform with (1) Walkway* Platform with () Walkways* Nominal Catalog Number Catalog Number Catalog Number Span 3PAL-1 3PCAL-1 3PCAL-1 1 feet 3PAL-14 3PCAL-14 3PCAL feet 3PAL-16 3PCAL-16 3PCAL feet *Note: Platforms with walkways do not include wood planks. Wood planks optional, but can be ordered separately. See Accessories section.
4 PLATFORMS Heavy Duty Platforms Platform Only Platform with (1) Walkway* Platform with () Walkways* Nominal Extra Pole Kit Catalog Number Catalog Number Catalog Number Span Catalog # HDPAL-8 HDPCAL-8 HDPCAL-8 8 feet Extra Pole Kit H.D. & E.H.D. HDPAL-10 HDPCAL-10 HDPCAL feet HDPAL-1 HDPCAL-1 HDPCAL-1 1 feet HDPAL-14 HDPCAL-14 HDPCAL feet HDPAL-16 HDPCAL-16 HDPCAL feet HDPAL-18 HDPCAL-18 HDPCAL feet HDPAL-0 HDPCAL-0 HDPCAL-0 0 feet HDPAL- HDPCAL- HDPCAL- feet 3 *Note: Platforms with walkways do not include wood planks. Wood planks optional, but can be ordered separately. See Accessories section.
5 PLATFORMS Extra Heavy Duty Platforms Platform Only Platform with (1) Walkway* Platform with () Walkways* Nominal Extra Pole Kit Catalog Number Catalog Number Catalog Number Span Catalog # EHDPAL-1 EHDPCAL-1 EHDPCAL-1 1 feet Extra Pole Kit H.D. & E.H.D. EHDPAL-14 EHDPCAL-14 EHDPCAL feet EHDPAL-16 EHDPCAL-16 EHDPCAL feet EHDPAL-18 EHDPCAL-18 EHDPCAL feet EHDPAL-0 EHDPCAL-0 EHDPCAL-0 0 feet EHDPAL- EHDPCAL- EHDPCAL- feet *Note: Platforms with walkways do not include wood planks. Wood planks optional, but can be ordered separately. See Accessories section. 4
6 PLATFORMS Double Extra Heavy Duty Platforms Platform Only Platform with (1) Walkway* Platform with () Walkways* Nominal Extra Pole Kit Catalog Number Catalog Number Catalog Number Span Catalog # EHDPAL-14 EHDPCAL-14 EHDPCAL feet Extra Pole Kit EHD EHDPAL-16 EHDPCAL-16 EHDPCAL feet EHDPAL-18 EHDPCAL-18 EHDPCAL feet EHDPAL-0 EHDPCAL-0 EHDPCAL-0 0 feet EHDPAL- EHDPCAL- EHDPCAL- feet EHDPAL-4 EHDPCAL-4 EHDPCAL-4 4 feet EHDPAL-6 EHDPCAL-6 EHDPCAL-6 6 feet 5 *Note: Platforms with walkways do not include wood planks. Wood planks optional, but can be ordered separately. See Accessories section.
7 Accessories PLATFORMS Platform Overhead Switch Mounts For mounting regulator bypass switches and disconnects above regulators and transformers. The best alternative to wood timbers. ntenance free, high strength 6061-T6 aluminum alloy Easy installation and equipment adjustment. Center slot captures 1/" hex bolts re rigid than wood timbers Catalog Number B-8 B-10 B-1 B-14 B-16 B-18 B-0 B- B-4 Nominal Span 8 ft. 10 ft. 1 ft. 14 ft. 16 ft. 18 ft. 0 ft. ft. 4 ft. Note: Order one or two overhead switch mounts per platform, depending on overhead equipment requirements. Platform Wood Walkway Planks Catalog Number Nominal Span Timbers x8x7'8 Timbers x8x9'8 Timbers x8x11'8 Timbers x8x13'8 Timbers x8x15'8 Timbers x8x17'8 Timbers x8x19'8 Timbers x8x1'8 8 ft. 10 ft. 1 ft. 14 ft. 16 ft. 18 ft. 0 ft. ft. 6
8 Short Regular Duty ALUMA-FORM Platforms (3 5-1/8 wide) Model No.* No. Poles Concentrated in Per position for 3 **Per position for 4 center of span position loading position loading equally equally spaced spaced SPAL--6 SPAL-4-6 SPAL--8 SPAL-4-8 PAL-1 PAL-14 PAL-16 3PAL-1 3PAL-14 3PAL-16 HDPAL-14 HDPAL-16 HDPAL-18 EHDPAL-14 EHDPAL-16 EHDPAL-18 EHDPAL-0 EHDPAL- Maximum Recommended Load (lbs.) Regular Duty ALUMA-FORM Platforms (3 5-1/8 wide) ,560 3,340,915 1,900 1,410 1,5 3,333 3,333 3,333 Heavy Duty ALUMA-FORM Platforms (3 5-1/8 wide) 6,750 6,750 6,750 4,500 4,500 3,60 1,500 1, ,500,500,500 3,375 3,375,840 Extra Heavy Duty ALUMA-FORM Platforms (3 5-1/8 wide) 9,000 9,000 8,600 6,880 5,630 6,000 4,650 3,60,900,370 4,500 3,650,840,75 1,860 Double Extra Heavy Duty ALUMA-FORM Platforms (3 11-3/8 wide) EHDPAL-14 EHDPAL-16 EHDPAL-18 EHDPAL-0 EHDPAL- 18,000 18,000 17,190 13,760 11,60 10,000 9,300 7,40 5,790 4,740 7,500 7,300 5,680 4,550 3,70 *Model No. feet and inches notation equals distance between pole centers for all platforms listed herein. **Four position loading requires extra catalog number BS which should be ordered with platform. Double Extra Heavy Duty platforms (EHD) require extra catalog number BS-EHD. Grounding Procedure. All the structural members used in Aluma-Form are suitable as grounding conductors. This means that the structure itself can be used for grounding. We do recommend the use of a No Oxide inhibiting compound after the grounding joint has been cleaned and abraded. This page contains Aluma-Form's recommended loading data for various platforms. The customer is cautioned, however, that the accompanying data is published only for general information in assisting platform selection and should be used only by skilled persons. Technical skills are required in the use of the information, platform selection, platform loading and installation. Loads shown are within the Aluminum Association's allowable stress design method for 6061-T6. All recommended loadings will produce deflections less than 1/50 of span. Greater loads may be applied in most cases but will result in deflections greater than 1/50 of span. Use of extra pole kits will also permit increased loading. Consult factory for any additional loading data. 365 Old Getwell Rd. Memphis, TN P.O. Box Memphis, TN Phone Fax Aluma-Form, Inc. 10/09/3M
CPHD-162, CPHD-182, CPHD-142-WKY, CPHD-162-WKY, CPHD-182-WKY
INSTRUCTIONS FOR HEAVY DUTY ALUMINUM PLATFORMS Catalog Number CPHD-142, CPHD-162, CPHD-182, CPHD-142-WKY, CPHD-162-WKY, CPHD-182-WKY Keep these instructions for future reference.! WARNING Failure to read
More informationSPLIT FRAME CUTTING & BEVELING MACHINES
SPLIT FRAME CUTTING & BEVELING MACHINES 1-48 WWW.BBPIPETOOLS.COM 713-747-8502 B&B Pipe & Industrial Tools 527 Michigan St South Houston, TX 77587 SPLIT FRAME CUTTING & BEVELING Portable O/D Locking Cold
More informationSTRONGWELL PULTRUDED GRATING
STRONGWELL PULTRUDED GRATING DURADEK and DURAGRID are high-strength pultruded bar type gratings that can be designed and used like traditional metal grates but have the inherent benefits of fiberglass.
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationPioneers in Gate Design
Stop Logs Pioneers in Gate Design Hydro Gate 3888 E. 45th Ave. #120 Denver, CO 80216 Your Source for Water Control Gates No matter what type of gates your project demands, chances are excellent Hydro Gate
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an
More informationSection Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationAluminium Structural Framing
info@smoothedge.co.za a division of Smoothedge SA (Pty) Ltd. Aluminium Structural Framing Aluminium vs Steel How do T-slots compare to welded steel products? T-slots were created to build structures faster
More informationSteel Construction Tools
F o r P Steel Construction Tools r o f e s s i o n a l s. Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These
More informationWALCOOM. Walcoom Corporation SAFETY GRATING.
WALCOOM Walcoom Corporation SAFETY GRATING Diamond-Strut Safety Grating Diamond-Strut safety grating is made of carbon steel, stainless steel or aluminum by cold forming. It can be divided into three types:
More information2013 Feeney (2/14) # B. Aluminum Railing Systems
2013 Feeney (2/14) #2012-425B Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the
More information2015 Feeney (8/15) # D. Aluminum Railing Systems
2015 Feeney (8/15) #2012-425D Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the
More informationMONKEY BARS OVERHEAD RACK INSTALLATION
MONKEY BARS OVERHEAD RACK INSTALLATION Thank you for purchasing the New Monkey Bars Overhead storage rack. The most innovative overhead rack on the market WARNING THE PROPER INSTALLATION OF THIS STORAGE
More informationPRELIMINARY. 2700K, 3000K, 3500K, 4000K, Static Red, Static Green, Static Blue, Static Amber
SPECIFICATION Line voltage LED, High Performance Facade and Flood Lighting Ideal for lighting facades, structures, bridges Industry leading center beam candlepower with optics Integral power (line voltage
More informationDoor Closers. General Information
General Information Hager Companies offers a variety of surface door closers to meet a wide range of applications and uses. Heavy Duty, Grade 1 door closers are ideal for schools, hospitals, and other
More informationBICO BADGER 5" X 7" JAW CRUSHER OPERATING INSTRUCTIONS
BICO BADGER 5" X 7" JAW CRUSHER OPERATING INSTRUCTIONS The Bico Badger Jaw Crusher is designed to give long and efficient service. In order to secure the long life and excellent performance, which your
More informationHeavy-Duty Steel Bar Grating
Heavy-Duty Steel Bar Grating Laurel Steel Division Company Profile Laurel Steel, a division of Steel, has been manufacturing heavy-duty steel bar grating since 1983, and is a member in good standing of
More informationINS-AS Dual Bracket Mounting Kits for Quintel Antennas
The Quintel Optimal Separation (QOS) Dual Mount Antenna Bracket Kit allows a variable horizontal separation for a single band or across multiple bands for two Quintel QS Series antennas when operating
More informationInc. BT Series. BW Series
Inc. 2013 BT Series BW Series Inc. Fast Installation One of the prime features of the RangeRack cable tray design is that the channel-style siderails accept spring nuts. This eliminates the need for any
More informationLight Structural Main Runner Light Structural Infill Tees. Straight Connector. Strut Structural Tee thread
Internal Splice Support Connector 85.6 Straight Connector 4.3 22.3 5.30 22.3 70.6 *Note: All Dimensions are in Millimeters U-Shape Connector, Hex Bolts, & Channel Nuts L-Angle Connector 9.7 3 8-6 for Light
More informationNORTH AMERICAN STEEL INNOVATIVE STORAGE SOLUTIONS OUR S T R E N G T H IS OUR PEOPLE NORTH AMERICAN RACK
NORTH AMERICAN STEEL INNOVATIVE STORAGE SOLUTIONS OUR S T R E N G T H IS OUR PEOPLE NORTH AMERICAN RACK NORTH AMERICAN RACK North American Rollformed Racking is compatible with Redirack and all major Canadian
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationWall Mount Kit for Elo IDS-02 Series IDS Displays
Quick Installation Guide Wall Mount Kit for Elo IDS-02 Series IDS Displays Revision B P/N UM600076 Safety Warning: Do not install this equipment on any wall or structure that is not capable of supporting
More informationTechline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.
Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE
More informationA. ASTM D Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
SECTION 074600 VINYL SIDING PART 1 GENERAL 1.1 SECTION INCLUDES A. Vinyl siding. B. Vinyl soffits. C. Accessories and trim. 1.2 RELATED SECTIONS A. Section 06100 - Framing and Sheathing. B. Section 07260
More informationACRO Building Systems
ACRO Building Systems America s Fastest Growing Supplier of Roofing Construction Tools and Equipment Made in the U A 6 Page Page 4 8 Page Phone: 800-267-3807 Phone: 414-445-8787 Fax: 414-445-8792 E-mail:
More informationSteel Construction & Steel Construction & Tools
Steel Construction & Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These tools are exceptionally rugged, with
More informationBox Edge Plus Steel Shelving Installation Instructions
Box Edge Plus Steel Shelving Installation Instructions IMPORTANT PRODUCT LIABILITY INFORMATION Read all instructions before proceeding with installation or shelf loading. Vital product information pertaining
More informationTechNote #34 ROTALIGN
Shaft alignment TechNote #34 ROTALIGN ROTALIGN ment of cardan shafts using Cardan Bracket ALI 2.893SET Introduction This technical note describes the alignment of two machines joined via a cardan spacer
More informationOptional keyway for location & alignment via key or Hepco dowel pins. Narrow rail with register face for convenience of spacing apart.
The HDS2 system comprises of a versatile family of slides, flat tracks, construction beams and other components, which will meet the requirements of the most demanding applications. 2 to 7 provide an overview
More informationExperience the Hi-Lite Advantage
Experience the Hi-Lite Advantage 12K Aluminum Shoring System INTRODUCTION The 12K Shoring System is primarily a hand-set system. It can also be handled with a crane, and may also be used quite successfully
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationArchitectural Door Accessories. Markar Continuous Hinges
Architectural Door Accessories Why Continuous Hinges? Hinge failure most commonly begins when doors are opened beyond stop device limits. The resulting kickback shock to the hinges can surpass 1000 lbs.
More informationInstallation Instructions. for AFL Compression Joint Installed on. CTC Composite Core Conductor
Installation Instructions for AFL Compression Joint Installed on CTC Composite Core Conductor NOTE: EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND/OR SPECIFICATIONS ARE THE PROPERTY
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS MODEL TSM-6000 FACING/SQUARING MACHINE REV 8/2011 USA Otto Arc Systems, Inc. (Corporate/Sales/Mfg. Division) 3921 Sandstone Drive El Dorado Hills, California 95762 Phone: (916) 939-3400
More informationDisclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size.
E546 V3 (1/17) Disclaimer Torque values listed in this book are based on mathematical calculations and experimental data. The values are valid only when the matched strength system listed is used. The
More informationmk Profile Technology
mk Profile Technology One Construction Kit, Many Options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion better products, better solutions One basic technology, four
More informationINSTALLATION INSTRUCTIONS WINCH MOUNTING PLATE FOR STOCK BUMPER Part Number: 88140, FOR 8274 Application: Jeep JK 2012+
INSTALLATION INSTRUCTIONS WINCH MOUNTING PLATE FOR STOCK BUMPER Part Number: 88140, 88418 FOR 8274 Application: Jeep JK 2012+ GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important.
More information2016 AASHTO BRIDGE COMMITTEE AGENDA ITEM: 24 (REVISION 1) SUBJECT: LRFD Bridge Design Specifications: Section 6, Various Articles (2)
2016 AASHTO BRIDGE COMMITTEE AGENDA ITEM: 24 (REVISION 1) SUBJECT: LRFD Bridge Design Specifications: Section 6, Various Articles (2) TECHNICAL COMMITTEE: T-14 Steel REVISION ADDITION NEW DOCUMENT DESIGN
More informationACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE
acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and
More informationABIMIG A & AT Lightweight MIG
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. ABIMIG A & AT Lightweight MIG Air-cooled MIG Torches www.binzel-abicor.com ABIMIG AT LW MIG/MAG Welding Torches Air cooled Up to 00 A Welding professionals
More informationALUMA-CLASSIC FENCE W1716 & W1720 INSTRUCTION MANUAL
ALUMA-CLASSIC FENCE W1716 & W1720 INSTRUCTION MANUAL Phone: Phone: 1-360-734-3482 On-Line On-Line Technical Technical Support: Support: tech-support@woodstockint.com tech-support@shopfox.biz COPYRIGHT
More informationSolarRoofHook CATALOG. (844) A DIVISION OF QUICKSCREWS INTERNATIONAL CORP.
SolarRoofHook A DIVISION OF QUICKSCREWS INTERNATIONAL CORP. 2018 CATALOG Low Profile QuickBOLT with Microflashing. See page 7. Take a look inside at SolarRoofHook s innovative solar mounting solutions
More informationPole Mount Installation Guide
Pole Mount Installation Guide (No Fine Adjustment) 495R Billerica Ave. North Billerica, MA 01862 USA Tel (978)459-8800 fax (978)459-3310 / 8814 Email: sales@radiowaves.com www.radiowaves.com IMPORTANT!
More informationModel PM Series Three Axis Mills
Model PM Series Three Axis Mills PM3000 PM2000 Features Setup & Operation Technical Data CLIMAX Portable Machine Tools, Inc. 10/98 1 Features Climax's PM Series 3-axis portable milling machines provide
More informationFITTINGS AND HOSES TOOL
FITTINGS AND HOSES INGERSOLL-RAND FITTINGS AND HOSES The Ingersoll-Rand line of ruggedly convenient hose reels and recoil hoses are pressurerated for optimized pneumatic performance, even in the toughest
More informationInstallation Instructions Standalone or continuous run configurations - 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS
- 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS TruGroove Drywall A3 MOUNTING Ceiling INSTALLATION System Overview These instructions review how to install trimless drywall versions of TruGroove
More informationSuperstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
More informationBUY A COMPLETE MOLD CLAMP ASSEMBLY OR INDIVIDUAL PARTS
Machined Mold s FEATURES: Our complete line of mold clamps are available in an extensive range of sizes. s are available in open-toe and closed-toe styles, as well as heavy duty and extra heavy duty versions.
More informationTable K. Input/Output Ratings & External Wiring Requirements for the Powerware /80 Rating 50/60 Hz. kva kw VOLTS VOLTS / /220
Table K. Input/ Ratings & External Wiring Requirements for the 9390-/ Units Rating 50/0 Hz Basic Unit Rating at 0.9 lagging pf load Input and Bypass Input Rectifier (0.98 min. pf) plus Recharge Current
More informationTable G. INPUT/OUTPUT Ratings & External Wiring Requirements for the /160 Rating 50/60 Hz. kva kw VOLTS VOLTS / /220
Table G. INPUT/OUTPUT Ratings & External Wiring Requirements for the 9390/ Units Rating 50/60 Hz Basic Unit Rating at 0.9 lagging pf load Input and Bypass Input A Input to UPS Rectifier (0.98 min. pf)
More informationH20 Beam for Elevated Slabs Application Guide
H20 Beam for Elevated Slabs Application Guide A WORD ABOUT SAFETY High productivity depends on safety; even a minor accident causes job delays and inefficiency, which run up costs. That s why Symons, in
More informationAluminium section balusters
Aluminium section balusters Eastern Park Farm Lane Nuthampstead Herts SG8 8LZ call 01763 847 020 fax 01763 847 030 email sales@sapphireeastern.com Midlands 10 Thorpe Way Banbury OX16 4SP call 01295 265
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More informationBest MATERIALS.com Discount Warehouse
Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not
More informationBIPPMM03 (Published) Book specs- Dates: / / Lang: ENG01 Applic: PPM
BIPPMM03 (Published) Book specs- Dates: 20060412 / 20060412 / 20060412 Lang: ENG01 Applic: PPM Installing the Milnor Diaphragm in the Single Stage Press This document applies to models MP160Axx, MP1604xx,
More informationFeatures. Continuous Duty Cycle Actuators
Features Predictable life. Continuous operation. Oil lubricated. High mechanical and thermal efficiency 2 models available. Capacity 3,500 to 27,000 pounds Available with C-Face motor adaptors and speed
More informationINSTALLATION GUIDE PermaTrak. Patented Product: U.S. Patent #5,906,084 #8,302,362 #8,522,505 #8,839,588 #9,096,975
INSTALLATION GUIDE 2009-2017 PermaTrak. Patented Product: U.S. Patent #5,906,084 #8,302,362 #8,522,505 #8,839,588 #9,096,975 Table of Contents Project Overview Forward, Acceptability Criteria, Safety,
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127
More informationINSTRUCTION MANUAL. Specifications Electrical. Front-To-Back Ratio VSWR at Resonance Less than 1.5:1 Nominal Impedance. Mechanical
300 Industrial Park Road, Starkville, MS 39759 Ph: (662) 323-8538 FAX: (662) 323-6551 TH-3JRS Tri-band HF 3 Elements Beam Covers 10, 15 and 20 Meters INSTRUCTION MANUAL WARNING Installation of this product
More informationFNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
More informationAdhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases
equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT
More informationABW-4-SSP ABW-5-SSP 5 ABW-6-SSP 6 ABW-7-SSP 7 ABW-4-ESP ABW-5-ESP 5 ABW-6-ESP 6 ABW-7-ESP 7 ABW(*)24HSP ABW(*)36HSP. Furnished in pairs with hardware.
Snap-In Splice Plate Designed to lock into place for easy alignment and installation. Packaged in pairs with zinc plated hardware. Provided as standard with each straight and fitting. ABW--SSP ABW--SSP
More informationMTS-ZB. RENOGY Photovoltaic Module Z-Bracket Mounting System E Philadelphia St, Ontario, CA Version: 1.
MTS-ZB RENOGY Photovoltaic Module Z-Bracket Mounting System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
More informationPower-Sure 700. Technical Data TD158001EN. Contents
Technical Data TD158001EN Power-Sure 700 Supersedes August 2015 Contents Description Page General description... 2 Power-Sure 700 benefits.... 2 Specifications... 3 Industry standards and certifications...
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationMODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
More informationT S 15KVA 1PH 240/480 Transformer
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T2535173S 15KVA 1PH 240/480 Transformer Acme Electric Catalog Number Manufacturer Description Weight per unit Product
More informationRUBBISH CHUTE TECHNICAL NOTE
RUBBISH CHUTE TECHNICAL NOTE HAEMMERLIN - CDH GROUP 28 RUE DE STEINBOURG - BP 30045-67701 1 SAVERNE CEDEX - FRANCE Tel. + 33 (0)3 88 01 85 00 - Fax + 33 (0)3 88 01 85 39 welcome@haemmerlin.com - www.haemmerlin.com
More informationAluminum Lake Truss Dock Instructions
Page 1 of 14 Table of Contents Aluminum Lake Truss Dock Instructions 1. Dock Assembly and Set-Up 1.1 Quick Start 1.2 Positioning Quick Clips 1.3 Installing Dock Legs 1.4 Installing Foot Pads 1.5 Installing
More informationARCHITECTURAL HARDWARE
05 52 00/JOH BuyLine 7969 ARCHITECTURAL HARDWARE 2009 AMERICA S #1 MANUFACTURER OF STAINLESS STEEL CABLE FITTINGS - SINCE 1958 C. Sherman Johnson Co. Inc. East Haddam, CT USA 1-800-874-7455 www.csjohnson.com
More informationMETHOD STATEMENT FOR THE CONSTRUCTION OF LIGHTWEIGHT HALLS
METHOD STATEMENT FOR THE CONSTRUCTION OF LIGHTWEIGHT HALLS General The exact position of the structure has to be established. Please note that the difference in height must not exceed 1.5% in longitudinal
More informationCrimping and Cutting Tool for Connectors, Accommodates wire. From No. 10 to 22 Awg CRIMPING/CUTTING TOOL FOR CONNECTORS. from No.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 1005 Crimping/Cutting Tool For Connectors Klein Tools Catalog Number 1005 Manufacturer Klein Tools Description Crimping
More informationTENNADYNE. Aluminum with a PhD. Tennadyne ASSEMBLY INSTRUCTIONS MODEL: T Log Periodic Antennas SPECIFICATIONS:
TENNADYNE Aluminum with a PhD ASSEMBLY INSTRUCTIONS MODEL: T10-100224 SPECIFICATIONS: FREQUENCY COVERAGE 13-33 MHz FORWARD GAIN 6.1 dbd ½ POWER BEAMWIDTH 52 DEGREES F:B RATIO To 25 Db (Rises with frequency)
More informationNINIGRET MARINE INC.
NINIGRET MARINE INC. everything you need to make docks Suppliers of Dock Hardware Marine Construction Hardware Specialty Hardware Permafloats 3964 South County Trail (Route 2) Charlestown, RI 02813 Telephone
More informationSS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E
SS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E Midwest Industries, Inc. Page 1 Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003231 REV A 1/25/05 Bundles
More information- 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS. Factory pre-installed mud flange TOOLS REQUIRED: Phillips screwdriver, 5/16 nut driver.
- 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS TruGroove Drywall A3 MOUNTING Ceiling INSTALLATION System Overview These instructions review how to install drywall trim versions of TruGroove recessed
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Gen II Mount System For 2011-2012 Dodge Ram HD 4500/5500 Bracket Kit 90160 Your safety, and the safety of others, is very important. To help you make informed decisions
More informationCOPALUM Terminals and Splices (For Solid & Stranded Aluminum or Copper Wire)
Product Facts Bar Crimp Technique Terminals and Splices for aluminum-to-aluminum and aluminum-to-copper stripped wire applications Terminates stripped, stranded and solid (round or rectangular) aluminum
More informationCertainTeed. Decking & Railing Systems
CertainTeed Decking & Railing Systems Oxford Oxford with colonial balusters in white 18 Metal-to-metal system Post caps and trims 2" Aluminum reinforced top and bottom rail 6' standard in flat, stair and
More informationVIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
More informationGrate-Lock Safety Grating - Design Load Table of Contents
Safety - Design Load Table of Contents Safe Loading Tables (6", 9", & 12" Widths) 11 2" Channel Height... 90-91 21 2" Channel Height... 92-93 3" Channel Height... 94-95 4" Channel Height... 96-97 Accessories
More informationSWITCH STAND Switch Stand Assembly Connecting Rod Target Assembly (when required) TURNOUT ACCESSORIES Standard Tie Plates Rail Anchors Joints
Turnouts A turnout is an arrangement of a switch, a frog and closure rails, which diverts rolling stock from one track to another. Because industrial trackwork often handles lighter loads at slower speeds
More information4000 Watt - Metal Halide - Three Stage Light Tower - 30 Feet
4000 Watt - Metal Halide - Three Stage Light Tower - 30 Feet Part #: LM-30-3S-4X1000W Page: 1 Made in the USA The LM-30-3S-4X1000W Light Tower from Larson Electronics is a 30 foot extendable light tower
More informationPERIMETER SMOKE SEALS
Trade Name: Raven Products Door Seals PERIMETER SMOKE SEALS Raven Door Seals : RP120 : RP150 : RP10Si : RP24Si : RP47Si : RP78Si : RP84Si : RP93Si : RP94Si Raven Door Sealing Systems are available to combat
More informationAN EXAMPLE OF A STANDARD ARC FLASH PPE LABELING STRATEGY
The Electrical Power Engineers Qual-Tech Engineers, Inc. 201 Johnson Road Building #1 Suite 203 Houston, PA 15342-1300 Phone 724-873-9275 Fax 724-873-8910 www.qualtecheng.com AN EXAMPLE OF A STANDARD ARC
More informationPlease Do Not Return This Product To The Store!
MODEL NOS. T8512 TOURNAMENT SERIES 3 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step. 2. Some smaller parts
More informationEzQuikTM. MicroSolar System EzQuik TM Aluminum Solar PV Module Mounting System. Code-Compliant Installation Manual V1011 (AS/NZ1170) Model 2012
TM Model 2012 Code-Compliant Installation Manual V1011 (AS/NZ1170) MicroSolar System TM Aluminum Solar PV Module Mounting System 1 CONTENTS SECTION 1 INTRODUCTION... 3 1.1... 3 1.2 Why?... 3 1.3 Before
More informationeasy-ordering and pricing guide
RESIDENTIAL COMMERCIAL SPRING 2007 easy-ordering and pricing guide Elegant shade systems for residential & commercial outdoor living measuring instructions measuring instructions 1. 2. Select a ShadeTree
More informationBoardwalk Construction Guidelines
Boardwalk Construction Guidelines Acton Land Stewardship Committee Acton, Massachusetts 1 Rev. 2-2/9/2018 NOTICE TO AGENCIES OUTSIDE THE ACTON LAND STEWARDSHIP COMMITTEE THE BOARDWALK CONSTRUCTION GUIDELINES
More informationROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
More informationSECTION ROOF ACCESSORIES. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 07720 ROOF ACCESSORIES PART 1 GENERAL 1.1 SECTION INCLUDES Display hidden notes to specifier. (Don't know how? Click Here) A. Attachment clamp system for standing seam metal roofs. B. Attachment
More informationHollow Stem Auger Modifications
Hollow Stem Auger Modifications Auger Extensions Auger Extensions are used to compensate for the distance from the ground up to the rig. To order these extensions please specify: 1. Length: standards are
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual Multi Tier Aluminum Support Stands Table of Contents WARNINGS General Safety..................... 2 Introduction................................ 3 Product Description..........................
More informationHEAVY DUTY REINFORCEMENT
HEAVY DUTY REINFORCEMENT HEAVY DUTY REINFORCEMENT Strap Braces Corner Braces Corner Braces - Offset Leg Wide Corner Braces Square Corner Braces Mending Plates Corner Plates Bar Holders 3 4 5 6 7 8 9 10
More informationREP Design LLC. 193 Winding Ridge Rd, Southington, CT INSTALLATION INSTRUCTIONS:
REP Design LLC 193 Winding Ridge Rd, Southington, CT 06489 1-860.426.1894 n7emw@cox.net www.repdesign.us INSTALLATION INSTRUCTIONS: SHD-SO239 Super Heavy Duty SO-239Antenna Mounting System Thank you for
More informationSINGLE-PHASE VSV SWITCH
May 2006 Supercedes: March 2006 SINGLE-PHASE VSV SWITCH INSTALLATION AND OPERATING MANUAL Table of Content: Page I. General...2 II. Specifications...2 III. Installation...2 IV. Maintenance...4 V. VSV Power
More informationLCSF Low Clearance Split Frame
Designed For Portability And Limited Clearance Full Range 2in - 48in for Pipe and Tube Optional Bridge Slide for Heavy Wall Pipe EXTERNALLY MOUNTED PORTABLE PIPE CUTTING AND BEVELING SYSTEM E.H. Wachs
More informationQUAD 1000 OWNERS MANUAL OPERATION GUIDE
QUAD 1000 OWNERS MANUAL OPERATION GUIDE www.laserlinemfg.com REV. 4.30.18 COMPONENTS 4001-0000 Quad 1000 5 arc second zenith laser featuring electronic servo self-leveling with variable temperature compensation
More information