Backyard Play Systems ULTRA PLAYSET. Recommended for Ages 3 to 11 - BEFORE YOU BEGIN - - NOTICE -

Size: px
Start display at page:

Download "Backyard Play Systems ULTRA PLAYSET. Recommended for Ages 3 to 11 - BEFORE YOU BEGIN - - NOTICE -"

Transcription

1 2293-ST 01/10/2013 Customer Service Ternes Monroe, MI 4816 Backyard Play Systems ULTRA PLAYSET Model 4098, 6315 Tools Required Sockets: 7/16" 9/16" Socket Extension Ratchet Hammer 5 lb. Sledge Recommended for Ages 3 to 11 - BEFORE YOU BEGIN - First... Check with your homeowner s association before assembling. Read instructions thoroughly before you begin. If you have purchased accessories to accompany this playset, please read all installation instructions before beginning assembly of this structure. Check All Parts If a part is missing, circle the part in question and call. Important In a drawing, a dotted line represents a part hidden from view (like a part under a panel). Adult Assistance required Assistance is necessary to handle, fit and secure some components. Squareness is very Important! Start with a level surface and keep 90 corners and 90 perpendiculars throughout the assembly to ensure all components fit together. Safety! Check for protruding screws and bolts, verify all screw and bolt lengths during assembly. Always wear OSHA-APPROVED safety glasses throughout assembly process. 9/16" Combination Wrench #2 Square Drive Bit (included) Phillips Bit Combo Drive Bit Cordless Drill w/charger Drill Bits: 1/8" 1/4" 7/16" 7/8" Tape Measure Level C - Clamps 8' Step Ladder - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. Your premium playset is manufactured from wood which has many natural characteristics and blemishes that may be present in some of the pieces in your playset. These natural characteristics may include knots or minor cracks/splits. All individual parts have been cut to provide a smooth and safe surface. All parts have been inspected to assure we pack only the safest, most durable wood product. Any minor blemishes in your playset will not affect the strength, durability, or structural integrity of the finished product. Our limited warranty does not cover the imperfections not resulting in structural failure.

2 (This page intentionally left blank.) 2

3 ASSEMBLY SAFETY and HELPFUL HINTS STOP!!! Check all parts and hardware before beginning. If any parts are missing or damaged please circle and call the phone number listed. DO NOT CONTACT THE STORE OR RETURN YOUR PLAYSET! KEEP THIS INSTALLATION MANUAL FOR FUTURE CARE AND MAINTENANCE REFERENCE. To aid in making your playset assembly easier, here is a listing of some helpful hints. Wear safety glasses during drilling, assembly of your playset. Children should not be allowed in the playset assembly and build area. Note the hole orientation on parts to avoid having to take parts apart later. Some steps require the assistance of two people to ensure proper assembly, safety during assembly, as well as preventing any damage to the playset. *IMPORTANT HARDWARE INFORMATION* All hex bolts and lag bolts require a lock washer or lock nut. To properly install lock nuts, two to three threads must protrude past the lock nut and be exposed once tightened. Due to wood characteristics and the manufacturing process hex bolts may protrude past a surface. If this condition occurs add additional supplied washers to eliminate bolt protrusion. To aid in proper assembly pound T-nuts into their respective hole prior to assembly Pound in T-nuts while the part is on the ground to ensure proper seating. Use a soft material under parts when pounding in T-nuts to ensure no scratching or de-facing of parts. Make sure all fasteners used are as specified. Using a fastener not specified in a particular application may result in too much thread exposure or not enough thread engagement. 3

4 SAFETY WARNINGS Please read carefully. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. This playset has been designed for use by a maximum of ten occupants at one time having a combined weight of 1,500 pounds. (This weight does not include occupants on the optional monkey bars, glider, or tire swing). This playset is recommended for children (3) through (11) years of age. On-site adult supervision for children of all ages is recommended. Instruct children not to walk close to, in front of, behind, or between moving items. Instruct children not to twist swing chains or ropes or loop them over the top support bar since this may reduce the strength of the chain or rope. Instruct children to avoid swinging empty seats. Teach children to sit in the center of the swings with their full weight on the seats. Instruct children not to use the equipment in a manner other than intended. Instruct children not to get off equipment while it is in motion. Parents should dress children appropriately (examples would include the use of well-fitting shoes and the avoidance of ponchos, scarves, and other loose-fitting clothing that is potentially hazardous while using equipment). Instruct children not to climb when the equipment is wet. Slippery surfaces may cause a hazard. Verify that suspended climbing ropes, chain, or cable are secured at both ends. Verify that suspended climbing ropes, chain, or cable cannot be looped back on itself. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. Instruct children to remove their bike or other sports helmet before playing on the playground equipment. Instruct children to not walk or run up slides. Instruct children to not pick up slides or ramps as this may cause damage or breakage. Place the equipment on level ground not less than six (6) feet from any obstructions. Be sure to look overhead for any obstructions above the playset. Do not use the equipment until fully erected per this playset instruction manual, bolts tightened and the playset is anchored to the ground. NOTICE: This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. 4

5 MAINTENANCE Periodic maintenance is required to ensure safe enjoyment of your playset and optional accessories. Observing the following procedures reduces the likelihood of serious or fatal injury. Activity on your playset and optional accessories may loosen fasteners. Check all lock nuts, hex and lag bolts, quick clips, spring clips, acorn nuts, wood screws, and swing hangers for tightness and tighten as required. T-nuts should be inspected for full and proper seating into the wood. Checking, splitting and surface cracking are characteristics of all wooden playsets. This is caused by varying seasonal temperatures and moisture conditions. To minimize this checking and/or cracking you may coat your playset with a water repellent. At the beginning of each play season: PLAYSET CHECKLIST Tighten all hardware. Lubricate all metallic moving parts per manufacturer s instructions. Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed. Check metal parts for rust. If found, sand and repaint using a nonleaded-based paint meeting the requirements of 16 CFR Check all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members. Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season. Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. Twice a month during play season: Tighten all hardware. Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. Once a month during play season: Lubricate all metallic moving parts per manufacturer s instructions. Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed. At the end of each play season or when the temperature drops below 10 F remove plastic swing seats, tents, sandbox cover, tire swing, slide and other items as specified by the manufacturer and take indoors or do not use. Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth.replace as necessary. When you are ready to dispose of your playset, make sure that all metal, plastic and wood components are disposed of in accordance with local waste ordinances. Buyer and/or owner should disassemble and dispose of the playground equipment in such a way that no unreasonable hazards will exist at the time the swing set is discarded. Do not burn your playset's preserved wood. 5

6 PLAYGROUND SURFACING MATERIALS SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK9 Select Protective Surfacing One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F There are different types of surfacing to choose from; whichever product you select, follow these guidelines: NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective surfacing. Ground level equipment such as a sandbox, activity wall, playhouse or other equipment that has no elevated play surface does not need any protective surfacing. Maximum fall height for this playset is 82. Loose-Fill Materials: Maintain a minimum depth of 9 inches of loose- fill materials such as wood mulch/chips, engineered wood fiber (EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9- inch depth of surfacing over time. The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain at least a 9- inch depth. Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly, this should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or compacted.) Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don t forget to account for water drainage. U.S Consumer Product Safety Commission, Washington, D.C., or call the toll-free hotline : Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of loose-fill materials, mark the correct level on play equipment support posts. That way you can easily see when to replenish and/or redistribute the surfacing. Do not install loose fill surfacing over hard surfaces such as concrete or asphalt. Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles: You may be interested in using surfacing other than loose-fill materials like rubber tiles or poured-in-place surfaces. Installations of these surfaces generally require a professional and are not do-it-yourself projects. Review surface specifications before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that the product has been tested to the following safety standard: ASTM F 1292 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surface is intended to protect against serious head injury. This height should be equal to or greater than the fall height vertical distance between a designated play surface (elevated surface for standing, sitting, or climbing) and the protective surfacing below of your play equipment. Check the protective surfacing frequently for wear. Placement Proper placement and maintenance of protective surfacing is essential. Be sure to Extend surfacing at least 6 feet from the equipment in all directions. For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height of the top bar from which the swing is suspended. For tire swings, extend surfacing in a circle whose radius is equal to the height of the suspending chain or rope, plus 6 feet in all directions. 2H 2H H 6 ft. 6 ft. Denotes Use Zone with Protective Surfacing 6 ft. 6 ft. L+6 ft. Denotes Use Zone with Protective Surfacing L 6 ft. 6 ft. Use Zone for Single-Axis Swings Use Zone for Multi-Axis Swings 9 This information has been extracted from the CPSC publications Playground Surfacing Technical Information Guide and Handbook for Public Playground Safety. Copies of these reports can be obtained by sending a postcard to the: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., or call the toll-free hotline:

7 PLAYSET ORIENTATION *Hint - Throughout this manual references made to the Left Side, the Right Side and the Front of the playset serve as a consistent reminder to help with assembly: LEFT SIDE FRONT SIDE RIGHT SIDE 7

8 IMPORTANT! Use these Assembly Procedure Hints throughout the installation process. 1. All Lag Bolts must have pre-drilled holes. Use a 1/4 drill bit for all 3/8 Lag Bolts. Use a 3/16 drill bit for all 5/16 Lag Bolts. Pre-drilling pilot holes will help prevent Screws and Lag Bolts from breaking and wood from splitting during assembly. DO NOT OVER-TIGHTEN LAG BOLTS 2. In areas where drilling a larger 1/2 hole is neccessary, such as when installing T-Nuts, (Fig. 1) the recommended procedure is to first drill-through a 1/4 pilot hole from the Hex Bolt side and then drill the larger 1/2 hole from the opposite T-Nut side. This will help avoid splintering the wood. The Drill Both Sides ICON (Fig. 1) will remind you to drill according to this procedure. Be sure to clean through-holes of debris before inserting Hex Bolts. 3. When assembling parts that are difficult to hold in position while pre-drilling pilot holes or assembling, use a clamp to keep parts aligned or in position. The Clamp ICON (Fig. 2) will advise you to use this procedure. Drill Both Sides ICON Fig. 1 (example) A B B A 1/4 pilot hole 1/2 drill through Fig. 2 Clamp ICON 8

9 BASE PARTS LIST 5/4 x 4 x 19-7/16" 2 x 4 x 47-7/8" 2 x 4 x 95" WOOD SIZE CONVERSION CHART Nominal Board Size Actual Size 1 x 4...3/4 x 3-3/ ST x ST 1200-ST 1 x /4 x 5-3/8 5/4 x x 3-1/2 5/8 x 3-1/4 x 32-1/2" 3/8 x 6 x 16" 2 x 4 x 59-1/2" 5/4 x x 5-1/2 2 x /8 x 3-3/8 2 x /8 x 5-3/8 4 x /4 x 3-1/ ST 1202-ST 1198-ST x4 2 x 4 x 65-1/8" 2 x 4 x 59-1/8" 5/4 x 6 x 95" W O O D P A R T S END VIEW 5/4 x 6 x 47-7/8" 3 x 3 x 44-1/8" 2547-W 2567-ST 2 x 6 x 75-1/2" 3-3/8 x 3-3/8 x 56-1/4" 2315-ST END VIEW 0 5/8 x 3-1/4 x 33" 1001-ST x4 2 x 4 x 51" 5/4 x 6 x 47-7/8" 2537-ST ST x ST 1 x 4 x 56-1/2" 5/4 x 6 x 67-1/2" 5/4 x 6 x 47-3/4" 3 x 3 x 44-1/8" 2310-W 1037-ST x ST x4 2 x 4 x 15" 2 x 4 x 15-3/8" 1053-ST 1051-ST 3/4 x 2-1/2 x 59-1/2" 3 x 3 x 77" 2541-ST 2325-W 2548-ST 5/4 x 4-1/4 x 47-3/4" 5/4 x 6 x 41-1/2" x ST 1009-ST 1029-ST x ST 2312-ST x4 2 x 6 x 84" 5/4 x 6 x 84" 5/4 x 6 x 47-3/4" 1088-ST 2540-ST 1026-ST 1 3-1/2 x 5-1/2 x 95" 3 x 3 x 95" 2 x 4 x 69-1/2" 2749-W 2525-W 2546-ST 5/4 x 6 x 70-3/4" 2 x 4 x 37-3/4" 2 x 4 x 18" 2 x 4 x 19" 1-x 1-3/8 x 17" 2506-ST 2568-ST 1020-ST x ST x x6 9

10 90 o Angle Bracket Plate Square-Hole Swing Beam 90 o Plate Swing Beam Angled Plate Left Swing Beam Angled Plate Right BASE HARDWARE Swing Beam Flat Plate Swing Hanger Plastic Hole-Plug Spring Clip Angled 2433 x6 Angle plug x x6 Safety Handle Binoculars Plaque Climbing Rocks - Green BASE ACCESSORIES Rope Sling Swing x3 x3 3/8 x 3" Lag Bolt 3/8" Sling Swing 2617 x4 Slide x6 Climbing Rocks - Yellow 2551 x6 Slide Green Yellow Green Yellow

11 A C T U A L S I Z E S H O W N 3/8 LAG BOLT WOODSCREWS 3-1/2" x4 3" x6 x90 x63 x8 x5 40 x56 1-1/4" 1-5/8" 1-3/4" 2" 2-1/2" 3" 1/4" SAFETY HANDLE HDW. TRUSS HEAD SCREW 1-1/2" x6 3/8" FLAT WASHER 3/4" 1 Lag Screw Flat Washer x86 #2 SQUARE DRIVE BIT 2-1/2" PAN HEAD SCREW 1-1/2" 1/4 ROCK WALL HARDWARE Lock Washer 2 Flat Washer 3/8" LOCK WASHER 3/8" T - NUT x64 x5 Hex Bolt T - Nut 2452 (2) BAGS x49 2-1/2" 1/4" x 1" FENDER WASHER 3/16" x 1 FENDER WASHER 3/8" LOCK NUT x5 1" 1" /8" 6

12 A C T U A L S I Z E S H O W N 4" 4-1/2" 5" 5-1/4" 5-1/2" 6" 4 6 x4 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3-3/4" x4 3-1/2" 2-1/2" 2" 1-1/2" 1-1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 12

13 A C T U A L S I Z E S H O W N x /4" 4-1/2" 6-1/2" 7" 9" 3/8" 3/8" 3/8" 3-1/2" 3/8" TORQUE WASHER 3/8" 3/8" 3/8" /8"

14 TOWER & BRIDGE PARTS LIST 5/4 x 6 x 23-1/2" 2 x 4 x 15-3/8" 5/4 x 4-1/2 x 39" WOOD SIZE CONVERSION CHART Nominal Board Size Actual Size 1121-ST x7 5/8 x 3-1/4 x 33" 2 x 4 x 38-5/8" 1051-ST x5 2 x 4 x 34-7/8" 2537-ST 5 5/4 x 5 x 47-3/4" 2327-ST 1119-W 1 x 4...3/4 x 3-3/8 1 x /4 x 5-3/8 5/4 x x 3-1/2 5/4 x x 5-1/2 2 x /8 x 3-3/8 2 x /8 x 5-3/8 4 x /4 x 3-1/4 5/4 x 4 x 17" 2 x 4 x 85-3/8" 2326-ST 2328-ST 5/4 x 6 x 47-3/ ST 2313-ST 1123-ST x6 3 x 3 x 95" 2 x 4 x 64" 5/4 x 5-3/8 x 22-1/2" 2329-W x ST 1120-ST 2 x 4 x 84" 2 x 4 x 64" 2 x 4 x 18" 2336-ST 2331-ST 5/4 x 6 x 46-3/8" 2 x 4 x 46-3/4" 2 x 4 x 46-3/4" 1124-ST x ST x4 2 x 4 x 25-1/4" 2 x 4 x 45-3/8" 2 x 4 x 45-3/8" 2 x 4 x 37-1/4" 1020-ST x ST 1114-ST 1116-ST 1117-ST 5/4 x 4 x 25-5/8" 2 x 4 x 43-1/2" 1118-ST 1 x 1-3/8 x 17" 90 o Angle Bracket Round-Hole 2335-ST 2334-ST 9" Hand Grip Metal Handrail 1015 x x W O O D P A R T S HDW.

15 T O W E R & B R I D G E F A S T E N E R S #2 SQUARE DRIVE BIT 1/4" SAFETY HANDLE HDW. 1-1/2" Lag Screw x6 3/8 1-1/2" Flat Washer 3/8" T - NUT x6 3/8" 2-1/2" 2-1/2 PAN HEAD SCREW x45 2-1/2" x3 3/8" HEX HEAD BOLTS 3" 3/8" x48 3/8" LOCK WASHER x48 3/8" FLAT WASHER x " x8 3/8" /2" 3-3/4" 1 1/4" x 1" FENDER WASHER x3 3/8" x84 1-1/4" 3/8 x 1-1/2" BUTTON HD SCREW 1" 4" WOODSCREWS x4 3/8" 1-1/2" 5-1/2" x6

16 SET-UP ORIENTATION BACK SIDE 31'-10" 6' SAFETY AREA SLIDES LEFT SIDE TOWER 19'-10" 11'-1" HEIGHT SWING 17'-5" 29'-5" RIGHT SIDE ROCK WALL 6' SAFETY AREA FRONT SIDE This space intentionally left blank. 16

17 FORT PARTS LAYOUT *IMPORTANT! Lay Out Corner Posts as shown. LEFT 3 x 3 x 44-1/8" 2310-W 5/4 x 4-1/4 x 47-3/4" 2545-ST 5/4 x 6 x 47-3/4" x ST 5/4 x 6 x 41-1/2" x ST Note 2547-W hole location. FRONT IMPORTANT! Install 1001-ST with counterbores oriented as shown ST 2 x 6 x 75-1/2" x W 3 x 3 x 44-1/8" RIGHT FORT CORNER POSTS / FLOOR SUPPORTS LEFT SIDE 3 x 3 x 44-1/8" 2310-W Lock Washer 2 x 6 x 75-1/2" 1001-ST 3 x 3 x 44-1/8" 2547-W 2 x 6 x 75-1/2" 1001-ST T-Nut 3/8 x 5-1/4 Hex Bolts RIGHT SIDE 17

18 FORT Pre-fit deck boards so they are evenly spaced before installing screws. Outside of Posts 48" 1 x 6 x 41-1/2" 2312-ST x4 CORNER POSTS / FLOOR Make sure corner posts are squared to measurements shown. Center boards between 48" and corner posts. 5/4 x 6 x 47-3/4" 1029-ST x8 5/4 x 4-1/4 x 47-3/4" 2545-ST 56-1/2" 56-1/2" 2-1/2" Wood Screws x52 Flush 48" Outside of Posts Board will ovehang. FORT CORNER POSTS / FLOOR T-Nut 4 NOTE: HOLE LOCATIONS OF 2547-W. 18

19 FORT LEFT SIDE 5/4 x 4 x 19-7/16" 1199-ST x4 ROOF SUPPORTS Lock Washer Flat Washer 2 x 4 x 95" 1200-ST 1-5/8" Wood Screws x8 Align Holes 4" Hex Bolt x4 1-5/8" Wood Screws Flat Washer Install Bolts firmly, but do not fully tighten. Re-Adjustment will be necessary. Lock Washer 4" Hex Bolt RIGHT SIDE FORT Keep 56-1/2" measurement when installing 1037-ST. 56-1/2" SIDE WALLS Screw into deck. LEFT SIDE 35-1/4" 3" Wood Screws /4" Flush at ends. 1 x 4 x 25-5/8" 2335-ST 1 x 4 x 56-1/2" 1037-ST 35-1/4" 35-1/4" Flush at ends. 1 x 4 x 56-1/2" 1037-ST Flush to 1200-ST 19 Sets on 1001-ST RIGHT SIDE

20 FORT UPPER ROPE ARM Orient Rope Arm parts 2540-ST as shown. Assemble using 1-3/4" screws, 2" Hex Bolt, Washers and T-Nut. Keep holes, ends and corners of both 2540-ST aligned and flush during assemby. Tighten the screws and the bolt securely. Flush when assembled. 1-3/4" Wood Screws T-Nut 1-3/4" Wood Screw 5/5 x 6 x 84" 2540-ST 1-3/4" Wood Screw *Note - All counterbores face outward. 1-3/4" Wood Screws Lock Washer 2" Hex Bolt 1-3/4" Wood Screw 1-3/4" Wood Screw Keep all holes aligned while assembling. Flush when assembled. *Note - All counterbores face outward. 20

21 FORT LEFT SIDE Lock Washer 5/5 x 6 x 84" 2540-ST PRE-DRILL 1/4" x 1-1/2" DEEP before installing lag bolts. Assembled Install bolts firmly, but do not fully tighten. Re-adjustment will be neccessary. 2 x 4 x 51" 1009-ST UPPER ARMS 4" Hex Bolt Lock Washer 5" Hex Bolt 3-1/2" Lag Bolt 3-1/2" Lag Bolt DO NOT OVER-TIGHTEN LAG BOLTS Lock Washer RIGHT SIDE FORT TENT END RAILS Check and keep all measurements while tightening all bolts securely. 48" 56-1/4" LEFT SIDE 48" 56-1/4" RIGHT SIDE 21

22 FORT INSTALL LEGS LEFT SIDE * Note - For Safety two people are required to carefully roll fort over. 5-1/4 Hex Bolt with Lock washer and 5-1/2 Hex Bolt Plastic Angled Plug 5-1/4 Hex Bolt Plastic Angled Plug 5-1/2 Hex Bolt T-Nut Flat Washer T-Nut Lock Washer 2325-W 3 x 3 x 77" Plastic Angled Plug RIGHT SIDE FORT INSTALL LEGS LEFT SIDE Temporarily secure two Right Side Legs (2325-W) with 5-1/4 Hex Bolts; Tap Bolts down lightly until Bolts bottom out. Do not install T-Nuts at this time. 3 x 3 x 77" 2325-W Plastic Angled Plug Lock Washer 5-1/2 Hex Bolt Tighten Securely RIGHT SIDE 22

23 FORT BOTTOM SUPPORTS LEFT SIDE T-Nut 2 x 4 x 51" 1009-ST 3-1/2" Lag Bolt DO NOT OVER-TIGHTEN LAG BOLTS Lag Bolt 2 x 6 x 84" 1088-ST Hex Bolt SIDE VIEW T-Nut T-Nut 4" Hex Bolt 3-1/2" Lag Bolt PRE-DRILL 1/4" x 1-1/2" DEEP before installing lag bolts. Lock Washer 4" Hex Bolt T-Nut RIGHT SIDE FORT Deck / Tire SUPPORT LEFT SIDE HINT: Temporarily hold 1085-ST in place under deck with (3) 1-5/8" screws. Then, secure from top with (26) 1-5/8" screws. Once secured, remove the (3) lower screws. Install 1-5/8" Wood Screws (x 26). Two in each deck board. 5/4 x 6 x 67-1/2" 1085-ST Same Measurement Same Measurement RIGHT SIDE 23

24 FORT INSTALL LEGS * Note - For Safety two people are required to carefully roll fort over. Remove and re-insert each 5-1/4" Hex Bolt (one at a time) through the holes from the opposite direction - this time using a Lock Washer, and T-Nut Install And Tighten Into T-Nuts At This Time. LEFT SIDE RIGHT SIDE 2nd position Lock Washer T-Nut 1st position After tightening all bolts Gently return Playset to it s upright position. Move partially assembled Playset into it s permanent location at this time, making sure ground has been leveled and prepared. 24

25 FORT STEP LADDER 2-1/2" Wood Screws (x 22) Angled End 2 x 4 x 59-1/8" 2316-ST 1053-ST 2 x 4 x 15" Flush 2315-ST 2 x 4 x 67-5/8" POSITION LADDER TOP BLOCK 1053-ST AS SHOWN TO LADDER RAIL. 2 x 4 x 15-3/8" 1051-ST x5 Front Back Back side of ladder FORT STEP LADDER Position assembled Step Ladder under Deck End Board and against inner floor support. Temporarily attach Ladder with one 3 Wood Screw as shown. Flush 3 Wood Screw RIGHT SIDE BACK SIDE 1009-ST 2 x 4 x 51" Mark and drill 9/16 through part 1009-ST. 25

26 FORT STEP LADDER 2 x 4 x 15" 1053-ST 1-5/8 Screws (x3) 3 Wood Screws x ST 2 x 4 x 15" Lock Washer 4-1/2 Hex Bolt Flat Washer T-Nut Flush Position Ladder Top Block beneath Deck End Board. Attach with three 1-5/8 Wood Screws. When installed, front edge of Ladder Top Block (1053-ST) should be flush with top of Step Ladder. FORT SWING BEAM SUPPORT LEFT SIDE 2 x 4 x 37-3/4" 2568-ST IMPORTANT! Install 2568-ST with counterbores toward inside of fort. 1-5/8" Wood Screws Flush with floor 26 RIGHT SIDE

27 FORT SWING BEAM SUPPORT LEFT SIDE 2-1/2" Hex Bolt Lock Washer Flat Washer 2 x 4 x 37-3/4" 2568-ST 1. Pre drill 3/16" pilot holes through 2568-ST from inside (A). Center drill in counterbore. A B T-Nut A B 2" Hex Bolt Lock Washer Flat Washer 2. Drill 7/16" through holes through 2568-ST from outside (B). Flush with floor RIGHT SIDE FORT SWING BEAM SUPPORT LEFT SIDE Small holes upward. Lock Washer 6" Hex Bolt 2542-ST 3-5/8 x 3-5/8 x 56-1/4" Lock Washer 6" Hex Bolt RIGHT SIDE 27

28 SWING BEAM How to install Torque Washers Thread Carriage Bolt through Torque Washer before seating the Torque Washer. Tap with hammer. Make sure Carriage Bolt square shank is aligned with square hole in Torque Washer before final seating of the Torque Washer. Complete final seating of Torque Washer by tapping into place. Carriage Bolt Torque Washer Align shank with washer hole. SWING BEAM SWING HANGERS Lock Nut x6 NOTE: Ensure two to three threads are exposed past Lock Nut. Lock Nut Torque Washer 6-1/2" Carriage Bolt 2 Torque Washer 2 3-1/2 x 5-1/2 x 95" 2749-W 7" Carriage Bolts 2 NOTE: You may need to tap bolts with hammer to get through holes. Clean all debris from bolt threads before installing lock nuts. 28

29 SWING BEAM A - FRAME T-Nut 2525-W 3 x 3 x 95" Rotate 2525-W 180 o after installing T-Nuts. SWING BEAM ASSEMBLE 3-3/4" Hex Bolt Lock Washer Pre-installed T-Nuts are underneath ST 5/4 x 6 x 70-3/4 29

30 SWING BEAM HARDWARE 3-1/2" Carriage Bolt 2411 BACK SIDE RIGHT SIDE NOTE: Ensure two to three threads are exposed past Lock Nut. Lock Nut SWING BEAM HARDWARE DO NOT FULLY TIGHTEN CARRIAGE BOLTS AT THIS TIME /4" Carriage Bolt Lock Nut NOTE: You may need to tap bolts with hammer to get through holes. Clean all debris from bolt threads before installing lock nuts W 30

31 SWING BEAM HARDWARE Lock Nut 3-1/2 x 5-1/2 x 95" 2749-W DO NOT FULLY TIGHTEN CARRIAGE BOLTS AT THIS TIME /2" Carriage Bolt 2447 NOTE: You may need to tap bolts with hammer to get through holes. Clean all debris from bolt threads before installing lock nuts. SWING BEAM ASSEMBLE Position swing beam assembly resting upon A-frame. 31

32 SWING BEAM ASSEMBLE Align holes and insert carriage bolt. Repeat where arrows are shown. x4 3-3/4" Carriage Bolt DO NOT FULLY TIGHTEN CARRIAGE BOLTS AT THIS TIME x4 Lock Nut SWING BEAM ASSEMBLE 6-1/2" Carriage Bolt Torque Washer NOTE: You may need to tap bolts with hammer to get through holes. Clean all debris from bolt threads before installing lock nuts. Lock Nut 32

33 SWING BEAM INSTALL Position swing beam assembly resting upon plate and align with holes. 6-1/2" Carriage Bolt 9" Carriage Bolt NOTE: You may need to tap bolts with hammer to get through holes. Clean all debris from bolt threads before installing lock nuts. Torque Washer RIGHT SIDE 2485 Lock Nut SWING BEAM INSTALL 1. Pre-drill using 3/16" bit. 2. Re-drill from opposite side using 7/16" bit. SEE PAGE 8 RIGHT SIDE 33

34 SWING BEAM INSTALL T-Nut Lock Washer 1-1/2" Hex Bolt RIGHT SIDE SWING BEAM INSTALL T-Nut Lock Washer 1-1/2" Hex Bolt RIGHT SIDE 34

35 SWING BEAM ASSEMBLE & LEVEL Level swing beam and tighten all swing beam fasteners. Pre drill 1/4" x 1-1/2" deep hole. Tighten all fasteners 3" Lag Bolt Lock Washer SWING BEAM FINAL ASSEMBLY 2-1/2" Pan Head Screw 1/4 x 1" Fender Washer 35

36 ROCK WALL LAY OUT PARTS - ROCK LOCATIONS 1 x 6 x 47-3/4" ST centered Place and align parts 1026-ST parallel on ground. *Hint: Number the order of each part (1026-ST) for correct re-orientation, top to bottom. Mark parts on back side or use masking tape. Lay Out all Climbing Rocks (2) in an attractive and practical fashion (6-GREEN, 6-YELLOW). DO NOT position Rocks outside the 41 dimension. DO NOT position Rocks in center of board. Mark position of each Rock in final decided position. ROCK WALL LAY OUT PARTS - ROCK LOCATIONS After marking Rock positions, remove Rocks and drill 1/4 holes through Rock Wall Deck Boards using the marked hole locations. 36

37 ROCK WALL INSTALL T-NUTS Turn all eleven 1026-ST panels over (lay on a soft but firm surface). Pound in 1/4" T-Nuts (in separate bag 2452) at each hole location. 1/4 T-Nut 6 ROCK WALL INSTALL ROCKS 1/4 x 1-1/2 Hex Head Bolts 1/4 Lock Washers 1/4 s Return panels to face up position. Align Climbing Rocks back into position over their holes ST 1 x 6 x 47-3/4" T-Nuts 37

38 ROCK WALL INSTALL 2-1/2" Screws x4 Install top rock wall board (1026-ST) flush to edge of fort floor using four 2-1/2" screws as shown. Secure rock wall cleat (2548-ST) with two 1-5/8" screws centered through middle holes of (1026-ST) top board. Upper end of rock wall cleat (2548-ST) should be 1/2" below top of (1026-ST) top board. Make sure rock wall cleat (2548-ST) is pulled tightly against back of (1026-ST) top board. 1-5/8" Screws Center 1 x 6 x 47-3/4" 1026-ST 1/2" Flush LEFT SIDE 2548-ST 3/4 x 2-1/2 x 59-1/2" RIGHT SIDE ROCK WALL INSTALL 2-1/2" Screws (x40) 2548-ST LEFT SIDE 1026-ST 0 1 x 6 x 47-3/4" RIGHT SIDE 1-5/8" Screws Center Secure rock wall cleat (2548-ST) with two 1-5/8" screws through two middle holes of lowest board. Make sure rock wall cleat (2548-ST) is centered and pulled tightly against back of lowest board. 38

39 ROCK WALL INSTALL 1-5/8" Screws (8) LEFT SIDE 1026-ST 0 1 x 6 x 47-3/4" RIGHT SIDE Continue securing rock wall cleat (2548-ST) with eighteen 1-5/8" screws through middle holes of rock wall boards. Make sure rock wall cleat (2548-ST) is pulled tightly against back rock wall boards. FORT SWING SIDE WALL RIGHT SIDE INSTALL THESE TWO BALUSTERS FIRST. 5/8 x 3-1/4 x 33" 2537-ST 1-1/4" Wood Screws x8 Install 2537-ST flush against board. Install 2537-ST flush at bottom. LEFT SIDE 39

40 FORT 1-1/4" Wood Screws 4 RIGHT SIDE INSTALL THESE TWO BALUSTERS SECOND. Flush SWING SIDE WALL 5/8 x 3-1/4 x 33" 2537-ST x6 SPACER SPACER SPACER SPACER SPACER SPACER Use 2537-ST as a 3-1/4" spacer. Install each 2537-ST flush at bottom. Inside View FORT BRIDGE SIDE WALL 1-1/4" Wood Screws 4 INSTALL THIS BALUSTER FIRST LEFT SIDE Inside View x3 5/8 x 3-1/4 x 33" 2537-ST Install each 2537-ST flush at bottom. SPACER SPACER Use 2537-ST as a 3-1/4" spacer. 5-1/2" 3-1/4" 40

41 ROPE LADDER ASSEMBLE & INSTALL 2 x 6 x 84" 2540-ST Pre-assembled 21-1/2" Step 1 Feed Ropes up through holes in Upper Rope Arm ( 2540-ST ) and tie a double knot. Step 2 Slide one Ladder Rung ( 1025-ST ) up the Ropes and tie a single knot in each rope. Repeat this step four more times with remaining Ladder Rungs. Approximately 13-1/2" between each Ladder Rung (1025-ST). 2 x 4 x 19" 1025-ST x5 2 x 6 x 84" 1088-ST Feed Ropes through front of Rope Ladder Top and Bottom Supports (2540-ST & 1088-ST). Tie a double knot on the back side. For Safety, keep tying double knots until there is no remaining loose rope. Do not cut ends of rope. 41

42 CLIMBING ROPE INSTALL 2 x 6 x 84" 2540-ST Pre-assembled OPTIONAL: Tie several single knots in locations to allow logical hand-grab points. 2 x 6 x 84" 1088-ST Step 1 Feed top of Climbing Rope through front of Upper Rope Arm ( 2540-ST ) and tie a double knot on the back side (Fig. 1). Step 2 Feed lower end of Climbing Rope through hole in Lower Rail ( 1088-ST ) and tie a double knot on the back side (Fig. 1). Fig. 1 For Safety, insure that the rope is tight enough so that it can not be looped back on itself. Keep tying double knots at the bottom end of rope until there is no remaining loose rope. Do not cut ends of rope. 42

43 ROOF RAFTERS 2 x 4 x 59-1/2" x ST T-Nut x4 Lay out four rafter-halves (1198-ST) as shown. Pound in T-Nuts. ROOF RAFTERS 2 x 4 x 59-1/2" x ST 3" Wood Screw Flush at peak 3" Wood Screw Flush at peak STEP 2 STEP 1 3-1/2" Hex Bolt x4 x4 T-Nuts are facing inward. Lock Washer x4 43

44 ROOF 5/4 x 6 x 47-3/4" 2569-ST 2-1/2" Wood Screws x8 ROOF BOARDS Center roof boards on rafters. Ensure equal overhang on both sides; about 7/8". Flush at peak 7/8" Maintain 43-3/8" dimension between rafters. 43-3/8" 7/8" ROOF ROOF BOARDS 2-1/2" Wood Screws x40 5/4 x 6 x 47-3/4" 2567-ST 0 Insert panels fully seated. Install all roof boards Flush. REPEAT INSTALLATION OF ROOF BOARDS (2567-ST) ON OPPOSITE SIDE. 44

45 ROOF ROOF BOARDS REPEAT INSTALLATION OF ROOF BOARD (2569-ST) ON OPPOSITE SIDE. 5/4 x 6 x 47-3/4" 2569-ST 2-1/2" Wood Screws x8 ROOF TRIM & RAFTER SUPPORT 3/8 x 6 x 16" 1202-ST Flush Screws installed from outside. 5/8 x 3-1/4 x 32-1/2" 1201-ST 1-1/4" Wood Screws 6 Screws installed from inside. Flush 45

46 SWINGS INSTALL Clip a Spring Clip at the end of each Swing and Trapeze chain. Then, using the Spring Clips, attach the Swings and Trapeze to the swing brackets on the swing beam, as shown below x6 Attach Playset Plaque using One 1" Philips Head Screw (provided) at each corner of Plaque Swing Swing Swing Yellow Green " Minimum when occupied. Adjust chains at Top. 46

47 STAKES Stakes Flush with TOP. STAKE STAKE STAKE STAKE x 1-3/8 x 17" 2-1/2" Wood Screws (x4) STAKE STAKE Stakes Flush with SIDES. STAKE STAKE STAKE Pound in Stakes (1015) at 45 degree angle. Make sure all base pieces, uprights and slide are resting flat on the ground. 2-1/2" Wood Screws (x4) It may be necessary to loosen the soil beneath playset to make everything level x 1-3/8 x 17" Stakes Flush with TOP x 1-3/8 x 17" 2-1/2" Wood Screws (x4) 47

48 SLIDE SLIDE MOUNT INSTALL 2" Wood Screw 2-3/4" 1 x 6 x 41-1/2" 2312-ST 2 x 4 x 15-3/8" 1051-ST 1051-ST 2 x 4 x 15-3/8" 1" Position slide mount beneath deck end board. Attach with two 2" wood screws as shown. Center Part 1051-ST on deck board. 14" 4-3/4" 3/4" 15-3/8" 3/4" 48

49 SLIDE MEASURE End deck board 1 x 6 x 41-1/2" 2312-ST 5/4 x 6 x 47-3/4" 1085-ST 2 x 4 x 15-3/8" 1051-ST 3/4" 4" Slide 2442 SLIDE DRILL Drill 1/8" holes at dimples through Slide and 2312-ST into 1051-ST (1 inch deep). 5/4 x 6 x 41-1/2" 2312-ST Slide 49

50 SLIDE MOUNTING SCREWS 2-1/2" Pan Head Wood Screw x3 1/4" x 1" Fender Washer x3 5/4 x 6 x 41-1/2" 2312-ST SLIDE SURFACING MATERIAL Apply Surfacing Material at recommended depth, or deeper. 50

51 SAFETY HANDLES INSTALL Attach Left and Right Safety Handles to the Step Ladder Rails with two 1/4" x 1-1/2" Lag Bolts through 1/4" s. Attach third Safety Handle as shown. The height of the handles is to be determined by the customer - depending on the age of the child, etc. 1/8" Pre-Drill (Do not drill through.) 2405 x3 1-1/2" Lag Bolts Flat Washer DO NOT OVER-TIGHTEN LAG BOLTS BACK BOTTOM END RAIL GUSSETS INSTALL Flush at edge. 3" Wood Screws 3" Wood Screws Flush at edge. 1/4" Pre-Drill x 2" deep. 2 x 4 x 18" 1020-ST 3" Wood Screw 51

52 ROPE LADDER BOTTOM SUPPORT GUSSETS INSTALL Flush at edge. 3" Wood Screws 3" Wood Screws Flush at edge. 1/4" Pre-Drill x 2" deep. 3" Wood Screw 2 x 4 x 18" 1020-ST SWING SAFETY BARRIER INSTALL Pre drill 1/4" x 1-1/2" deep at both sides. Do not drill through. LEVEL Lock Washer 3" Lag Bolt x ST 5/4 x 6 x 95" Flush with leg. RIGHT SIDE 52

53 STOP THE TIRE SWING KIT MAY BE INSTALLED NOW. REFER TO THE TIRE SWING INSTALLATION MANUAL. BEGIN TOWER & BRIDGE ASSEMBLY BACK SIDE RIGHT SIDE LEFT SIDE FRONT SIDE 53

54 TOWER FRAME 1 T-NUTS Eventual parts shown for positioning only (don t install yet!). T-Nut 0 TOP Install T-Nuts BEFORE assembling Tower. T-Nuts should be installed toward the INSIDE of tower legs (2329-W). 57-3/8" After installing all T-nuts, flip each 2329-W end-over-end lengthwise, as shown. 3 x 3 x 95" 2329-W 3-3/4" 56-1/2" 96" 1-3/4" IMPORTANT! Orient both parts 2329-W as shown for T-nut installation. Pay close attention to hole locations! TOWER FRAME 1 T-Nut ASSEMBLE 3" Wood Screw 2 x 4 x 84" 2336-ST 5-1/2" Hex Bolt Lock Washer Flush 3-3/4" Hex Bolt Lock Washer 5/4 x 6 x 46-3/8" 1124-ST 3 x 3 x 95" 2329-W 1-3/4" 56-1/2" Board 1124-ST will overhang 1-3/8" this side. TOP Pre-Installed T-Nuts downward! T-Nut 54 Flush 2 x 4 x 45-3/8" 1117-ST

55 TOWER FRAME 2 Install T-Nuts BEFORE assembling Tower. T-Nuts should be installed toward the INSIDE of tower legs (2329-W). 56-1/2" 1-3/4" 3 x 3 x 95" 2329-W T-NUTS IMPORTANT! Orient both parts 2329-W as shown for T-nut installation. Pay close attention to hole locations! 3-3/4" 57-3/8" After installing all T-nuts, flip each 2329-W end-over-end lengthwise, as shown. T-Nut 0 TOP Eventual parts shown for positioning only (don t install yet!). 96" TOWER FRAME 2 ASSEMBLE 3-3/4" Hex Bolt Lock Washer 5/4 x 6 x 46-3/8" 1124-ST 3" Wood Screw Flush 2 x 4 x 46-3/4" 1113-ST 5-1/2" Hex Bolt Lock Washer TOP 3 x 3 x 95" 2329-W Board 1124-ST will overhang 1-3/8" this side. Flush 3-3/4" 57-3/8" Board 1113-ST will overhang 1-3/8" this side ST Pre-Installed T-Nuts downward! T- Nut 55

56 TOWER ASSEMBLE 2 x 4 x 46-3/4" 1113-ST TOP Will be flush with top of board. Lock Washer 4" Hex Bolt TOWER ASSEMBLE Get a helper to steady the Tower Frame during this step. LEFT SIDE Lock Washer 4" Hex Bolt 56 FRONT SIDE

57 TOWER ASSEMBLE 5/4 x 6 x 46-3/8" 1124-ST 5/4 x 6 x 46-3/8" 1124-ST 3" Wood Screw x4 FRONT SIDE Flush Lock Washer 3-3/4" Hex Bolt x4 TOWER ASSEMBLE LEFT SIDE FRONT SIDE 2 x 4 x 46-3/4" 1115-ST 4" Hex Bolt Lock Washer 57

58 TOWER FRAME 2 x4 x 45-3/8" 1116-ST 3" Wood Screws x4 FRONT SIDE Flush 17-3/8" BACK SIDE 17-3/8" Flush TOWER DECK BACK SIDE Center between 2329-W and 2329-W W 4-1/2" 2-1/4" 2329-W 5/4 x 5 x 47-3/4" 2328-ST Install this panel first. 2-1/2" Wood Screws x W 2329-W FRONT SIDE 58

59 TOWER DECK 2-1/2" Wood Screws x48 5/4 x 4-1/2 x 39" 2327-ST FRONT SIDE 2327-ST 2328-ST (pre-installed) 1123-ST x6 5/4 x 6 x 47-3/4" (spaced evenly) BACK SIDE BRIDGE FRAME ST FRONT SIDE Pre-Installed T-Nut Lock Washer 1-1/2" Hex Bolt 59

60 BRIDGE FRAME 1-11/16" From edge of corner post. 1-13/16" 27-5/8" Measure and Mark four locations. 1-3/4" 27-5/8" 1-11/16" From edge of corner post. LEFT SIDE BRIDGE FRAME 7/16" Pre-Drill through. 60

61 BRIDGE FRAME 3-11/16" 19" Mark both locations. 6" From inside of Corner Post. BRIDGE JOIST 1-1/2" Hex Bolt Lock Washer x 4 x37-1/4" TG 1118-ST Flush Flush T-Nut 61

62 BRIDGE JOIST 7/16 7/16" Drill Through T-Nut Flush 2336-ST TA B Lock Lock 1-1/2 Washer Hex Bolt 1-1/2" Hex Bolt BRIDGE JOIST TG 1118-ST Flush T-Nut T-Nut 1-1/2 Hex Bolt Lock Washer 1-1/2" Hex Bolt Lock Washer T-Nut T-Nut PLAYSET DECK 62

63 BRIDGE ATTACH T-Nut Lock Washer x4 2-1/2" Hex Bolt T-Nut 1-3/8 x 3-3/8 x 43-1/2" 2334-ST T-Nut BRIDGE DECK Flush to uprights 2-1/2" Wood Screws 8 1 x 6 x 23-1/2" x ST 1121-ST Install First FRONT SIDE Flush all panels. 63

64 TOWER & BRIDGE RAILING x6 4" Hex Bolt Lock Washer 2 x 4 x 46-3/4" 1113-ST Flush Flush 1113-ST 2 x 4 x 46-3/4" ORIENT BOARDS SO TOP IS FLUSH WITH POST. 2 x 4 x 85-3/8" 2313-ST FRONT SIDE BRIDGE RAILING 8-3/16" 2 x 4 x 85-3/8" 2313-ST 1-1/4" 64

65 BRIDGE RAILING 7/16" Drill Through. KEEP DRILL LEVEL. 2 x 4 x 85-3/8" 2313-ST BRIDGE RAILING T-Nut Angle Bracket 2084 T-Nut Flat Washer Lock Washer 1-1/2" Button 2 x 4 x 85-3/8" Head Screw 2313-ST Flat Washer Lock Washer 1-1/2" Button Head Screw 65

66 TOWER CORNER SUPPORT 1-3/8 x 3-3/8 x 34-7/8" 1119-ST T-Nut BACK SIDE 2-1/2" Hex Bolt Lock Washer TOWER & BRIDGE RAILING FRONT SIDE 2 x 4 x 25-1/4" 1114-ST counterbore on underside. Lock Washer 2-1/2" Hex Bolt Flush Lock Washer 4" Hex Bolt 66

67 BRIDGE RAILING 1-1/2" Button Head Screw Lock Washer Angle Bracket /8 x 3-3/8 x 38-5/8" 2326-ST 4" T-Nut BRIDGE RAILING 8-3/16" 1-1/4" 67

68 BRIDGE RAILING 7/16" Drill Through BRIDGE RAILING T-Nut Flat Washer Lock Washer 1-1/2" Button Head Screw 2 x 4 x 38-5/8" 2326-ST 68

69 BRIDGE INSTALL Flush 2326-ST 2 x 4 x 38-5/8" 3" Wood Screw BALUSTERS INSTALL Ensure 3-1/4" space between each baluster. 2-1/4" BEGIN HERE 3-1/4" 6-1/4" BEGIN HERE 3-1/4" 6-1/4" 3/8" SPACER 1-1/4" Wood Screws x ST 5 5/8 x 3-1/4 x 33" Use 2537-ST as 3-1/4" spacer after installing first baluster.

70 BALUSTERS INSTALL 3-1/4" 6-1/4" 3/8" Ensure 3-1/4" space between each baluster. 7-1/2" 3-1/4" BACK SIDE 3/8" 2537-ST 2537-ST 1-1/4" Wood Screws 0 BALUSTERS 1-1/4" Wood Screws 0 INSTALL Ensure 3-1/4" space between each baluster. 2-1/4" 3-1/4" 3/8" BEGIN HERE x ST SPACER 70

71 STEP LADDER ASSEMBLE 2 x 4 x 15-3/8" x ST 2 x 4 x 64" 2331-ST 2 x 4 x 64" 2330-ST 3" Wood Screws 0 Back side of ladder STEP LADDER INSTALL 3-1/2" 16" 2336-ST Measure, Mark and 7/16" Pre-Drill Through. 1-11/16" FRONT SIDE 71

72 STEP LADDER INSTALL T-Nut T-Nut 2336-ST Lock Washer 3" Hex Bolts FRONT SIDE HAND GRIPS INSTALL 24-1/2" Measure, Mark and 7/16" Pre-Drill Through. 1-11/16" 24-1/2" 1-11/16" 72

73 HAND GRIPS INSTALL Metal Handrail 2083 T-Nut Lock Washer 1-1/2" Button Head Screws T-Nut 1-1/2" Lag Bolts x4 DO NOT OVER-TIGHTEN LAG BOLTS 9" Hand Grip 2405 STAKES INSTALL x4 1 x 1-3/8 x 17" /2" Wood Screws x8 73

74 SAND BOX SEATS INSTALL 5/4 x 6 x 22-1/2" 1120-ST 3" Wood Screws x8 Flush Flush GUSSETS INSTALL 2 x 4 x 18" 1020-ST x4 2-1/2" Wood Screws 3" Wood Screws 2329-ST Flush at outside edges. 74 1/4" Pre-Drill 2" deep.

75 STEP LADDER - LADDER BLOCK INSTALL 2-1/2" Screws x4 Flush CENTER IN OPENING. 1 x 4 x 17" 2222-ST 2222-ST BACK SIDE SLIDE INSTALL Dimples 2 x 4 x 45-3/8" 1117-ST 5" 2 x 4 x 46-3/4" 1113-ST 2-1/4" TOP VIEW

76 SLIDE INSTALL 1117-ST Drill 1/8" holes at x3 dimples through Slide, deck boards and into 1117-ST 1 inch deep. 5" Slide SLIDE INSTALL 2-1/2" Pan Head Wood Screw x3 1/4" x 1" Fender Washer x ST 76

77 SLIDE SURFACING MATERIAL Apply Surfacing Material at recommended depth, or deeper. BINOCULARS INSTALL Binoculars /4" Fasteners 2. Attach binoculars to bracket with fasteners as shown. Any Top Rail 1/4" 1/4" Lock Nut 1/4" 1/4 x 4-1/4" Hex Bolt 1. Install binocular bracket FIRST. Binocular Bracket 3/8 x 3" Lag Bolt 3/8" Pre-Drill 5/16" x 2" deep. Top Rail Drill hole in middle of rail. 77

78 WARRANTY Backyard Play Systems warrants the following: 1. All wood and plastic (polymer) coated wood components have a Limited Lifetime Warranty. Treated Wood - Backyard Play Systems will replace treated wood which becomes structurally unfit due solely to damage caused by fungal decay or termites. Plastic (Polymer) Coated Woodguard TM Backyard Play Systems will replace Woodguard TM components which become structurally unfit due solely to damage caused by fungal decay or termites. The plastic coating color can fade naturally over time. This warranty excludes color fading. 2. All non-wood components* have a three year Limited Warranty. *Ropes carry a one year Limited Warranty. 3. Installation labor has a three year Limited Warranty applicable on playsets installed by Backyard Play Systems. Labor warranty does NOT apply to Do-It-Yourself playset kits or kits installed by a third party. Backyard Play Systems will repair, replace or pay for the affected part at our discretion. In no event shall Backyard Play Systems pay the cost of labor or installation or any other costs related thereto. Non-residential use of the system is prohibited and will void this warranty as the system is designed for residential use only. Conditions The warranty is effective only when: 1. The unit has been erected in accordance with the assembly instructions. Plastic end caps and hole plugs have been properly installed on plastic coated wood. 2. The unit has been regularly and properly maintained and inspected. 3. The failure occurs when the unit is owned by the original purchaser. 4. This warranty is non-transferable 5. Backyard Play Systems has received a copy of your original proof of purchase with any claims in writing. 6. Backyard Play Systems has had reasonable opportunity during the sixty (60) days following the receipt of notification to inspect and verify the failure prior to commencement of any repair work. 7. Significant color changes to wood components is at the discretion of Backyard Products and require proof in the form of photographs or inspection by Backyard Play Systems. Wooden components may have imperfections such as checks and knots. These are natural blemishes and imperfections which are inherent to wood. The imperfections not resulting in structural failure are not covered under this warranty. Requirements To validate your warranty it is necessary to fill out and mail in the enclosed warranty card. And also to maintain and inspect your playset regularly. Regularly is defined as once per start and end of season. Claim Procedure To make a claim under this warranty, you can either call or prepare a letter. Please have ready the information below when you call or include the information in writing: 1. The model and size of the product. 2. A list of the part(s) for which the claim is made. 3. Proof of purchase of the Backyard Play Systems item, as shown on the original invoice. 4. Run Code, as listed on the enclosed warranty card. Mail the above information to: Backyard Play Systems Attn: Customer Service 1000 Ternes Dr. Monroe, MI

79 WARRANTY Please feel free to call our Consumer Help Line Toll Free April through October M - F 8:00 AM to 7:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST No warranty is offered on the following: (1) equipment subject to abuse, negligence, improper installation, vandalism, acts of God, unauthorized alteration or attachment to equipment other than our own: or (2) equipment subjected to improper use, service or repair by customer or any third party. To the maximum extent permitted by law, this warranty and the remedies set forth herein are exclusive and expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for a particular purpose. If Backyard Play Systems cannot disclaim or exclude implied warranties under applicable law, then to the extent possible any claims under any such implied warranties shall expire on expiration of the applicable warranty period. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may or may not apply to you. Backyard Play Systems does not assume, or authorize any person to assume for us, any other liability in connection with the sale of our products. To the maximum extent of the law, Backyard Play Systems assumes no responsibility for incidental or consequential damages which may arise from the purchase or use of our playset or equipment. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. If any provision of this limited warranty is invalid, void or unenforceable in any instance or respect, the unenforceable provision will be severed and reformed to effect the intent of this limited warranty to the maximum extent possible, and the remaining provisions shall continue in full force and effect and shall be enforced to the full extent permitted by law. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. WARRANTY TERMS MAY VARY OUTSIDE THE U.S.A. This manual is your warranty certificate. Please retain your original proof of purchase and this manual for any warranty claims. 79

STOP! Call Us First! DO NOT RETURN TO STORE.

STOP! Call Us First! DO NOT RETURN TO STORE. 2293-SB - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN

More information

- NOTICE STOP!

- NOTICE STOP! - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. 2321 STOP! Call Us First! DO NOT RETURN TO

More information

F 8:00 AM 6:00 PM EST 8:30 AM 4:30 PM EST

F 8:00 AM 6:00 PM EST 8:30 AM 4:30 PM EST 2692 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO

More information

F 8:00 AM 6:00 PM EST 8:30 AM 4:30 PM EST

F 8:00 AM 6:00 PM EST 8:30 AM 4:30 PM EST 2490-D - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO

More information

Backyard Play Systems. Playset. Recommended for Ages 3 to 11 - BEFORE YOU BEGIN - - NOTICE -

Backyard Play Systems. Playset. Recommended for Ages 3 to 11 - BEFORE YOU BEGIN - - NOTICE - 2690-MB 1/25/2013 Customer Service 1-866-890-2211 1000 Ternes Drive Monroe, MI 48162 Backyard Play Systems Playset Model 4097 Model 6314 Tools Required Socket Set Hammer 9/16" Combination Wrench 3/16"

More information

F 8:00 AM 7:00 PM EST 8:30 AM 4:30 PM EST

F 8:00 AM 7:00 PM EST 8:30 AM 4:30 PM EST 2320 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO

More information

STOP! Call Us First! DO NOT RETURN TO STORE.

STOP! Call Us First! DO NOT RETURN TO STORE. 2996 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO

More information

STOP! Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information call our toll free number:

STOP! Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information call our toll free number: 2321 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO

More information

ATTENTION! IMPORTANT! If you have the Fort and Terrace options this manual supersedes Manual 2692 in the Base Kit.

ATTENTION! IMPORTANT! If you have the Fort and Terrace options this manual supersedes Manual 2692 in the Base Kit. 2998 ATTENTION! IMPORTANT! If you have the Fort and Terrace options this manual supersedes Manual 2692 in the Base Kit. (This page intentionally left blank.) 2998 - NOTICE - This playset product is not

More information

STOP! Call Us First! DO NOT RETURN TO STORE.

STOP! Call Us First! DO NOT RETURN TO STORE. 2981 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO

More information

ATTENTION! IMPORTANT! This manual supersedes Manual 2692 in the Base Kit.

ATTENTION! IMPORTANT! This manual supersedes Manual 2692 in the Base Kit. 2999 ATTENTION! IMPORTANT! This manual supersedes Manual 2692 in the Base Kit. (This page intentionally left blank.) 2999 - NOTICE - This playset product is not intended for public use. It is intended

More information

(This page intentionally left blank.)

(This page intentionally left blank.) 2358 (This page intentionally left blank.) Customer Service 1-866-890-2211 1000 Ternes Monroe, MI 4816 Backyard Play Systems Playset 2358 05/27/2011 Model 4500, 4505, 5005, 5008, 6096, 6098. Tools Required

More information

STOP! Call Us First! DO NOT RETURN TO STORE.

STOP! Call Us First! DO NOT RETURN TO STORE. 2985 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO

More information

Safety Guidelines and Assembly Instructions

Safety Guidelines and Assembly Instructions Play Action Air Rider TM Safety Guidelines and Assembly Instructions Maximum Weight Limit: 210 pounds We re Here To Help! Call Toll Free 1-888-752-9782 Customer Service: Monday - Friday, 8:00 A.M. to 5:00

More information

F 8:00 ESTA 7:00 P.M. EST 8:30 ESTA 4:30 P.M. EST

F 8:00 ESTA 7:00 P.M. EST 8:30 ESTA 4:30 P.M. EST 2071 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! PARADA! Call Us First! DO NOT RETURN

More information

Extreme Tube Slide - 5ft.

Extreme Tube Slide - 5ft. Extreme Tube Slide - 5ft. Part Number: 03-0014 Revison: A 6.12.2013 Please inspect and inventory all parts immediately upon accepting delivery. Use the inventory pages in the manual to make sure you have

More information

Owner s Manual and Assembly Instruction

Owner s Manual and Assembly Instruction Owner s Manual and Assembly Instruction Model #: 22-PS120 Model Name: Verona III Swing Set Manual Date: September, 2007 Important: Keep this owner s manual; do not discard in case you need to contact Pacific

More information

Chesapeake TM PB 8243 ASSEMBLY INSTRUCTIONS

Chesapeake TM PB 8243 ASSEMBLY INSTRUCTIONS PB 8243 Chesapeake TM check out http://www.swing-n-slide.com/planupdates.html for updates to these instructions For more information, visit this link: http://www.swing-n-slide.com 28'-6'' 26'-6'' No. of

More information

Swing Beam Kit PB 8263 ASSEMBLY INSTRUCTIONS

Swing Beam Kit PB 8263 ASSEMBLY INSTRUCTIONS PB 8263 Swing Beam Kit check out http://www.swing-n-slide.com/planupdates.html for updates to these instructions For more information, visit this link: http://www.swing-n-slide.com 28' Minimum Safe Use

More information

Classic Tire Swing Set

Classic Tire Swing Set Owners & Instruction Manual Classic Tire Swing Set This instruction booklet is to be used exclusively for Eastern Jungle Gym customers only. It is not to be handed out to the general public. Any duplication

More information

9 Station Swing Set User Manual

9 Station Swing Set User Manual 9 Station Swing Set User Manual For model: P9-SS Assembly, Installation, Care, Maintenance, and User Instructions WARNING READ THESE MATERIALS PRIOR TO ASSEMBLING AND USING THIS SWING SET. Failure to assemble

More information

Playful Platform 29' 29'

Playful Platform 29' 29' R PB 8270 Playful Platform TM check out http://www.swing-n-slide.com/planupdates.htm for updates to these instructions. Option #1 PB 8263 Swing Beam PB 8270 Platform NE 4675L Slide 29' Option #2 PB 8263

More information

Costco High Wire Assembly Instruc ons & Owner's Manual

Costco High Wire Assembly Instruc ons & Owner's Manual 2254 Costco High Wire Assembly Instruc ons & Owner's Manual Important! Read this manual completely through before assembly and use. Consumer assistance Toll free If you need to order replacement parts

More information

Important safety considerations

Important safety considerations Important safety considerations This product is intended for use by children not less than 2 years of age. Warning: possible problems of entrapment could occur if used by children under 2 years of age.

More information

Extreme Tube Slide II - 5ft. Part Number: Revison D: LA 9459

Extreme Tube Slide II - 5ft. Part Number: Revison D: LA 9459 Extreme Tube Slide II - 5ft. Part Number: 03-0020 Revison D: 6.19.2018 LA 9459 Please inspect and inventory all parts immediately upon accepting delivery. Use the inventory pages in the manual to make

More information

Safety Guide & Building Instructions

Safety Guide & Building Instructions Safety Guide & Building Instructions TM PS 73201 PS 73202 PS 73203 PS 73204 We re Here To Help! Call Toll Free 1-888-752-9782 Customer Service: Monday - Friday, 8:00 A.M. to 5:00 P.M. C.S.T. SAFETY This

More information

MODEL PS10CLASB ASSEMBLy MAnuAL

MODEL PS10CLASB ASSEMBLy MAnuAL Assembly Manual By If you have problems or questions about your Creative Playthings Play Set, DO NOT CALL THE RETAILER. Contact Creative Playthings Customer Service at 1-800-833-4001 or customerservice@creativeplaythings.com

More information

Backyard Circus Club

Backyard Circus Club Backyard Circus Club Assembly Instructions 5-70-0299 (Rev 0-12.15.11) Contains Assembly, Use, and Maintenance Instructions NOTICE: This product is intended for outdoor family domestic use only with children

More information

MODEL PS10CLATL ASSEMbLy MAnuAL

MODEL PS10CLATL ASSEMbLy MAnuAL Assembly Manual By If you have problems or questions about your Creative Playthings Play Set, DO NOT CALL THE RETAILER. Contact Creative Playthings Customer Service at 1-800-833-4001 or customerservice@creativeplaythings.com

More information

Creating Childhood Memories Owners & Instruction Manual

Creating Childhood Memories Owners & Instruction Manual R Creating Childhood Memories Owners & Instruction Manual Dream This instruction booklet is to be used exclusively for Eastern Jungle Gym customers only. It is not to be handed out to the general public.

More information

IMPORTANT!! ASSEMBLY INSTRUCTIONS

IMPORTANT!! ASSEMBLY INSTRUCTIONS PB 8137 ASSEMBLY INSTRUCTIONS! WARNING: Assembly by an adult. IMPORTANT!! PLEASE READ BEFORE BEGINNING ASSEMBLY!! Please make sure all lumber, hardware and accessory parts are accounted for. If you are

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS SPIRAL WAVE SLIDE ASSEMBLY FOR 4 FOOT DECKS F24570 ASSEMBLY INSTRUCTIONS 18 8 (5.7 m) 14 5 (4.4 m) Solowave Design 375 Sligo Rd. West, PO Box 10 Mount Forest, ON Canada N0G 2L1 General Inquiries: 8:00am

More information

Bengal Fort Snack Bar Install Manual Version 7.16

Bengal Fort Snack Bar Install Manual Version 7.16 Bengal Fort Snack Bar Install Manual Version 7.6 Tools Needed for Assembly Tape Measure 24 Level Angle Square Phillips Screw Driver 3/8 Cordless Drill or Electric Drill 3/8 Drive Ratchet or Electric Impact

More information

MERRY GO ROUND ITEM NO: 8030

MERRY GO ROUND ITEM NO: 8030 MERRY GO ROUND ITEM NO: 8030 OWNER S MANUAL CAUTION: This unit is designed to be used safely by up to 4 children between the ages of 3 years to 8 years old with a maximum weight of 00 pounds (45.4 kgs)

More information

INSTALLATION AND OPERATING INSTRUCTIONS

INSTALLATION AND OPERATING INSTRUCTIONS L A U R E N T I A N P L AY S Y S T E M F 2 3 2 8 0 INSTALLATION AND OPERATING INSTRUCTIONS 25'-3" 13'-3" 12'-9" 25'-10" WARNING To reduce the risk of serious injury or death, you must read and follow these

More information

INSTALLATION AND OPERATING INSTRUCTIONS WARNING. 375 Sligo Rd. West, PO Box 10 Mount Forest, ON Canada N0G 2L0

INSTALLATION AND OPERATING INSTRUCTIONS WARNING. 375 Sligo Rd. West, PO Box 10 Mount Forest, ON Canada N0G 2L0 A P P L E T O N P L AY S Y S T E M F 2 4 1 4 8 INSTALLATION AND OPERATING INSTRUCTIONS WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer

More information

INSTALLATION AND OPERATING INSTRUCTIONS

INSTALLATION AND OPERATING INSTRUCTIONS A I N S L E Y P L AY S Y S T E M F 2 4 1 4 5 INSTALLATION AND OPERATING INSTRUCTIONS WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer to

More information

INSTALLATION AND OPERATING INSTRUCTIONS WARNING. 375 Sligo Rd. West, PO Box 10 Mount Forest, ON Canada N0G 2L0

INSTALLATION AND OPERATING INSTRUCTIONS WARNING. 375 Sligo Rd. West, PO Box 10 Mount Forest, ON Canada N0G 2L0 S U N B I S T R O P L AY S Y S T E M F 2 4 1 5 0 INSTALLATION AND OPERATING INSTRUCTIONS 22'-10" 10'-10" 27'-0" 9'-0" WARNING To reduce the risk of serious injury or death, you must read and follow these

More information

Play House 5 & 6 Assembly Instructions

Play House 5 & 6 Assembly Instructions Play House 5 & 6 Assembly Instructions 2101 Harrod Street Raleigh, NC 27604 800/982-1822 919/875-4499 Fax 919/875-4264 PA-MAN-PHB-00 2011 Woodplay. All rights reserved. I N T R O D U C T I O N Welcome

More information

Jaguar Playcenter Treehouse Panel Install Version 3.17

Jaguar Playcenter Treehouse Panel Install Version 3.17 Jaguar Playcenter Treehouse Panel Install Version 3.17 Tools Needed for Assembly Tape Measure 2 Level Angle Square Phillips Screw Driver 3/8 Cordless Drill or Electric Drill 3/8 Drive Ratchet or Electric

More information

Universal Monkey Bar Install Manual

Universal Monkey Bar Install Manual Universal Monkey Bar Install Manual Version 9.4 Tools Needed for Assembly Tape Measure 24 Level Angle Square Phillips Screw Driver 3/8 Cordless Drill or Electric Drill 3/8 Drive Ratchet or Electric Impact

More information

MONKEY TOWER PG123W. RECOMMENDED TOOLS: Impact Driver (2) Saw Horses (4) Bar Clamps or C-Clamps

MONKEY TOWER PG123W. RECOMMENDED TOOLS: Impact Driver (2) Saw Horses (4) Bar Clamps or C-Clamps MONKEY TOWER PG3W REQUIRED TOOLS: () 3/4" Sockets and Ratchets 3/4" Wrench /" Socket and Wrench 9/6" Socket and Wrench 5/6" Allen Wrench Drill with Phillips Driver Bit 3/8" Drill Bit /8" Drill Bit Hammer

More information

Parrot Island Monkey Bar Fort & Playcenter Install

Parrot Island Monkey Bar Fort & Playcenter Install Parrot Island Monkey Bar Fort & Playcenter Install Version 6.4 Tools Needed for Assembly Tape Measure 24 Level Angle Square Phillips Screw Driver 3/8 Cordless Drill or Electric Drill 3/8 Drive Ratchet

More information

Rocketship Clubhouse

Rocketship Clubhouse Rocketship Clubhouse Assembly Instructions 5-70-0278 (Rev 0-10.25.11) Contains Assembly, Use, and Maintenance Instructions NOTICE: This product is intended for outdoor family domestic use only with children

More information

IMPORTANT!! ASSEMBLY INSTRUCTIONS

IMPORTANT!! ASSEMBLY INSTRUCTIONS NE 4275-4 PB 8210-4! WARNING: Assembly by an adult. No. of children: Up to 12 Est. building Time: 6-11 hrs. Two Adults IMPORTANT!! PLEASE READ BEFORE BEGINNING ASSEMBLY!! Please make sure all lumber, hardware

More information

BAYBERRY PLAY HOUSE P280050

BAYBERRY PLAY HOUSE P280050 BAYBERRY PLAY HOUSE P280050 INSTALLATION AND OPERATING INSTRUCTIONS 14 5 (4.4 m) 7 8 18 8 (5.7 m) 4 2 WARNING To reduce the risk of serious injury or death, you must read and follow these instructions.

More information

DRIVEWAY SERIES D554 D560

DRIVEWAY SERIES D554 D560 DRIVEWAY SERIES D554 D560 Version ' Keep this instruction manual in case you have to contact the manufacturer for replacement parts. 2 FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR

More information

HAZELWOOD PLAY SYSTEM F24152

HAZELWOOD PLAY SYSTEM F24152 HAZELWOOD PLAY SYSTEM F24152 INSTALLATION AND OPERATING INSTRUCTIONS 24' 12' 12'-8" 27'-0" WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer

More information

HAZELWOOD PLAY SYSTEM F24152

HAZELWOOD PLAY SYSTEM F24152 HAZELWOOD PLAY SYSTEM F24152 INSTALLATION AND OPERATING INSTRUCTIONS 24' 12' 12'-8" 27'-0" WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer

More information

A I N S L E Y P L AY S Y S T E M F

A I N S L E Y P L AY S Y S T E M F A I N S L E Y P L AY S Y S T E M F 2 4 1 4 5 INSTALLATION AND OPERATING INSTRUCTIONS WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer to

More information

BROOKRIDGE PLAY SYSTEM F23235

BROOKRIDGE PLAY SYSTEM F23235 BROOKRIDGE PLAY SYSTEM F23235 INSTALLATION AND OPERATING INSTRUCTIONS 12'-11" 24'-11" 12'-9" 26'-0" WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep

More information

6 FT KIDS WAVY SLIDE MODEL# 9305WS PRODUCT MANUAL - VERSION

6 FT KIDS WAVY SLIDE MODEL# 9305WS PRODUCT MANUAL - VERSION 6 FT KIDS WAVY SLIDE PRODUCT MANUAL - VERSION 03.16.02 FOR AGES: 4-10 WEIGHT LIMIT: 75 Lbs 34 Kgs ADULT(S) NEEDED: TOOLS NEEDED: WARNING/ADVERTENCIA CUSTOMER SERVICE ADULT ASSEMBLY REQUIRED. Do not allow

More information

playsets Tire Swing Station ASSEMBLY MANUAL Copyright 2012 Gorilla Playsets All Rights Reserved

playsets Tire Swing Station ASSEMBLY MANUAL Copyright 2012 Gorilla Playsets All Rights Reserved playsets Tire Swing Station ASSEMBLY MANUAL Copyright 2012 Gorilla Playsets All Rights Reserved Gorilla Playsets 190 Etowah Industrial Court Canton, GA 30114 (800) 882-0272 www.gorillaplaysets.com Latest

More information

The Festival Assembly Instructions

The Festival Assembly Instructions The Festival Assembly Instructions Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown CONTACT INFORMATION: HomePlace Structures 301 Commerce Drive New

More information

Stand Alone Swingbeam Install Manual Version 6.16

Stand Alone Swingbeam Install Manual Version 6.16 Stand Alone Swingbeam Install Manual Version 6.16 Tools Needed for Assembly Tape Measure 24 Level Angle Square Phillips Screw Driver 3/8 Cordless Drill or Electric Drill 3/8 Drive Ratchet or Electric Impact

More information

INSTALLATION AND OPERATING INSTRUCTIONS WARNING

INSTALLATION AND OPERATING INSTRUCTIONS WARNING S K Y L I N E I I P L AY S Y S T E M F 2 3 9 3 1 INSTALLATION AND OPERATING INSTRUCTIONS WARNING 9.1m To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and

More information

Oasis PG05W Assembly Instructions

Oasis PG05W Assembly Instructions Oasis PG05W Assembly Instructions 817 Maxwell Avenue Evansville, IN 47711 1-800-GO-SWING www.escaladesports.com 2010 Escalade Sports 2L-7204-01 H A R D W A R E I D E N T I F I C A T I O N MB 6 (1 /2 X

More information

MEADOWVALE II PLAY SYSTEM F24035

MEADOWVALE II PLAY SYSTEM F24035 MEADOWVALE II PLAY SYSTEM F24035 INSTALLATION AND OPERATING INSTRUCTIONS 14 5 (4.4 m) 24 10 / 7.9m 12 10 / 3.9m 18 8 (5.7 m) 10 6 / 3.2m 28 / 8.5m WARNING To reduce the risk of serious injury or death,

More information

PB 5207 PB 6207 ASSEMBLY INSTRUCTIONS. Warning: Do not allow children on the playset until is has been completely built and properly anchored

PB 5207 PB 6207 ASSEMBLY INSTRUCTIONS. Warning: Do not allow children on the playset until is has been completely built and properly anchored R PB 5207 PB 6207 Warning: Do not allow children on the playset until is has been completely built and properly anchored ASSEMBLY INSTRUCTIONS Swing N Slide 1212 Barberry Drive Janesville, Wisconsin 53545

More information

C872 Series ADJUSTABLE HEIGHT. Version 3

C872 Series ADJUSTABLE HEIGHT. Version 3 C872 Series ADJUSTABLE HEIGHT GOAL SYSTEM Version 3 Thank you and congratulations for purchasing a Ryval Hoops Goal - the finest basketball goal system on the market today! You will discover that Ryval

More information

Treehouse. Contains Assembly, Use, and Maintenance Instructions Rev

Treehouse. Contains Assembly, Use, and Maintenance Instructions Rev Treehouse Contains Assembly, Use, and Maintenance Instructions 5-70-0184 Rev 1-05.04.09 NOTICE: This residential play structure is intended for use by children ages 3-11. WARNING: This owner's manual contains

More information

Model #SH & CH SH Pine CH Naturaline

Model #SH & CH SH Pine CH Naturaline Model #SH304-101 & CH304-101 Assembly Manual SH304-101 Pine CH304-101 Naturaline Component Parts A 2 ea. Angled Rail - 2 x 4 x 107-1/8" B 1 ea. Center Angled Rail - 2 x 4 x 107-1/8" C 9 ea. Rock Board

More information

Safety Guide & Building Instructions

Safety Guide & Building Instructions Safety uide & uilding Instructions PS 7958 (2) PS 7690 PS 7538 (2) PS 7688 PS 7668 (2) PS 8870 PS 8860 PS 8850 PS 8820 PS 8814 Featured Components (purchase separately): PS 7838 PS 7668 PS 7690 (2) PS

More information

MODEL PS10FRA. Model PS10FRA with. Top Ladder. Model PS10FRA with. Swing Beam

MODEL PS10FRA. Model PS10FRA with. Top Ladder. Model PS10FRA with. Swing Beam Manual By Model PS10FRA with Top Ladder Model PS10FRA with Swing Beam If you have problems or questions about your Creative Playthings Playset, DO NOT CALL THE RETAILER. Contact Creative Playthings Customer

More information

STOP! Call Us First! DO NOT RETURN TO STORE.

STOP! Call Us First! DO NOT RETURN TO STORE. 16712 STOP! Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information call our toll-free number: 1-800-577-9663 or email: customerservice@backyardproductsllc.com Our

More information

Please Do Not Return This Product To The Store!

Please Do Not Return This Product To The Store! MODEL NOS. T8512 TOURNAMENT SERIES 3 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step. 2. Some smaller parts

More information

CONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013

CONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013 U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -

More information

PB 8328 WS 8328 IMPORTANT!! JAMBOREE

PB 8328 WS 8328 IMPORTANT!! JAMBOREE PB 8328 WS 8328 JAMBOREE IMPORTANT!! PLEASE READ BEFORE BEGINNING ASSEMBLY!! Please make sure all lumber, hardware and accessory parts are accounted for. If you are missing anything, please DO NOT RETURN

More information

southpaw enterprises, inc.

southpaw enterprises, inc. Store these instructions in a safe place or with the enclosed maintenance checklist In-FUN-ity Climbing System Assembly Examples This example sheet is intended to supplement the instruction sheets that

More information

INSTALLATION AND OPERATING INSTRUCTIONS

INSTALLATION AND OPERATING INSTRUCTIONS F O R E S T H I L L R E S O RT P L AY S Y S T E M F 2 3 1 8 0 INSTALLATION AND OPERATING INSTRUCTIONS 7'-7" 28'-4" 16'-4" 26'-0" WARNING To reduce the risk of serious injury or death, you must read and

More information

DO NOT CALL THE RETAILER.

DO NOT CALL THE RETAILER. Assembly Manual By Model PS10AND with Top Ladder Model PS10AND with Swing Beam If you have problems or questions about your Creative Playthings Playset, DO NOT CALL THE RETAILER. Contact Creative Playthings

More information

INSTALLATION AND OPERATING INSTRUCTIONS WARNING

INSTALLATION AND OPERATING INSTRUCTIONS WARNING W I N D A L E P L AY S Y S T E M F 2 3 2 2 0 INSTALLATION AND OPERATING INSTRUCTIONS 10'10 " 3.105m 24'11" 7.348m 12'-11" 3.93m 26' 7.924 m WARNING To reduce the risk of serious injury or death, you must

More information

SPRING VALLEY DELUXE F25005

SPRING VALLEY DELUXE F25005 SPRING VALLEY DELUXE F25005 INSTALLATION AND OPERATING INSTRUCTIONS 30'-7" 18'-7" 11'-5" 27' WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and

More information

SELWOOD SPIRAL SLIDE A24575

SELWOOD SPIRAL SLIDE A24575 SELWOOD SPIRAL SLIDE A24575 INSTALLATION AND OPERATING INSTRUCTIONS FORT 4'-0" 10'-0" 8'-2" 20'-2" WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep

More information

Loading Dock Safety Gate

Loading Dock Safety Gate Installation Instructions/Operation and Maintenance Manual Models LDSG-120-PCY LDSG-144-PCY Table of Contents Product Information...2 Parts List...3 Installation Instructions...5 Operation...13 Inspection

More information

SANDY COVE PLAY SYSTEM F23242

SANDY COVE PLAY SYSTEM F23242 SANDY COVE PLAY SYSTEM F23242 INSTALLATION AND OPERATING INSTRUCTIONS 26'6 25' 13 12'8" WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer

More information

KIDS ROCKER SEESAW MODEL# 9306RS PRODUCT MANUAL - VERSION

KIDS ROCKER SEESAW MODEL# 9306RS PRODUCT MANUAL - VERSION KIDS ROCKER SEESAW PRODUCT MANUAL - VERSION 03.16.02 FOR AGES: 4-10 WEIGHT LIMIT: 150 Lbs 68 Kgs ADULT(S) NEEDED: TOOLS NEEDED: WARNING/ADVERTENCIA CUSTOMER SERVICE Please read all the instructions before

More information

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

PATRIOT DOCKS ASSEMBLY INSTRUCTIONS

PATRIOT DOCKS ASSEMBLY INSTRUCTIONS 6/1/2008 PATRIOT DOCKS ASSEMBLY INSTRUCTIONS Congratulations on your new Patriot Dock purchase. This manual contains instructions to assemble basic dock configurations for use at typical shoreline application.

More information

S K Y L I N E A D D O N M O N K E Y L A D D E R A E INSTALLATION AND OPERATING INSTRUCTIONS WARNING

S K Y L I N E A D D O N M O N K E Y L A D D E R A E INSTALLATION AND OPERATING INSTRUCTIONS WARNING S K Y L I N E A D D O N M O N K E Y L A D D E R A 2 3 9 1 8 E INSTALLATION AND OPERATING INSTRUCTIONS 9.1m 5.5m 4.3m 8.3m WARNING To reduce the risk of serious injury or death, you must read and follow

More information

Please Do Not Return This Product To The Store!

Please Do Not Return This Product To The Store! MODEL NOS. T81 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step.. Some smaller parts may be shipped inside

More information

Pathway Stair System For use with the Pathway Modular Ramp System, as freestanding stair, or with other structures.

Pathway Stair System For use with the Pathway Modular Ramp System, as freestanding stair, or with other structures. Assembly Manual Pathway Stair System For use with the Pathway Modular Ramp System, as freestanding stair, or with other structures. Manufactured in the USA LIFETIME WARRANTY. Please register at www.ezaccess.com/warranty-satisfaction.

More information

Orangutan Fort Installation Manual Version 10.15

Orangutan Fort Installation Manual Version 10.15 Orangutan Fort Installation Manual Version 0.5 Tools Needed for Assembly Tape Measure 4 Level Angle Square Phillips Screw Driver 3/8 Cordless Drill or Electric Drill 3/8 Drive Ratchet or Electric Impact

More information

ADVENTURE TUNNEL A25230

ADVENTURE TUNNEL A25230 ADVENTURE TUNNEL A25230 INSTALLATION AND OPERATING INSTRUCTIONS 8'-5" 6'-1" 14'-5" WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer to

More information

RICHMOND LODGE F25685

RICHMOND LODGE F25685 RICHMOND LODGE F25685 INSTALLATION AND OPERATING INSTRUCTIONS WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer to these instructions often

More information

Powered by. For further installation assistance: prxperformance.com/pages/murphy-rack

Powered by. For further installation assistance: prxperformance.com/pages/murphy-rack Powered by The 90 Fold-in Murphy Rack is made by the creators of the original Profile Folding Rack at PRx Performance and is Patent Pending. An up-to-date record of patents and patent pending items can

More information

1531 Fort Add On **!!IMPORTANT-PLEASE READ!!**

1531 Fort Add On **!!IMPORTANT-PLEASE READ!!** 1531 Fort Add On **!!IMPORTANT-PLEASE READ!!** This Add-On kit will require you to deviate from the main instruction manual. Please follow the outline below so that you will know what steps to be aware

More information

12 x 14 retractable sunshade

12 x 14 retractable sunshade 12 x 14 retractable sunshade Installation and Operating Instructions YP11691 Pergola Room Sold Separately Revised 11/29/2013 Yardistry North America Toll Free Customer Support: 1.888.509.4382 info@yardistrystructures.com

More information

Tilting Flat Panel Wall Mount Installation Guide

Tilting Flat Panel Wall Mount Installation Guide Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees

More information

6.4 Deluxe Spiral Slide Install Manual

6.4 Deluxe Spiral Slide Install Manual 6.4 Deluxe Spiral Slide Install Manual Version 4.4 Tools Needed for Assembly Tape Measure 24 Level Angle Square Phillips Screw Driver 3/8 Cordless Drill or Electric Drill 3/8 Drive Ratchet or Electric

More information

Full Height Ladder Safety Gate

Full Height Ladder Safety Gate Full Height Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models Powder Coat Yellow (PCY) 304 Stainless Steel (SS) Hot Dipped Galvanized (GAL) Table of Contents Product

More information

WESTPORT 8' SLATE POOL TABLE ASSEMBLY INSTRUCTIONS

WESTPORT 8' SLATE POOL TABLE ASSEMBLY INSTRUCTIONS WESTPORT 8' SLATE POOL TABLE ASSEMBLY INSTRUCTIONS NG2690A THANK YOU! Thank you for purchasing this product. We work around the clock and around the globe to ensure that our products maintain the highest

More information

Please Do Not Return This Product To The Store!

Please Do Not Return This Product To The Store! MODEL NO. T8176 QUICK SERVE 3000 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step. 2. Some smaller parts may

More information

GearBoss II High Density storage

GearBoss II High Density storage Assembly/Owner s Manual GearBoss II High Density storage contents Safety...........................................2 General......................................2 Installation...................................2

More information

TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF

TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF DXST10000 IMPORTANT: Please read this manual carefully before assembling this storage rack and save it for reference INSTRUCTION MANUAL 3 TABLE OF CONTENTS

More information

RIDGEVIEW DELUXE CLUBHOUSE PLAY SYSTEM F270855

RIDGEVIEW DELUXE CLUBHOUSE PLAY SYSTEM F270855 INSTALLATION AND OPERATING INSTRUCTIONS 26' 5" RIDGEVIEW DELUXE CLUBHOUSE PLAY SYSTEM F270855 14' 5" 13 6" 26' 6" WARNING To reduce the risk of serious injury or death, you must read and follow these instructions.

More information

Laminate Cabinet Installation Instructions

Laminate Cabinet Installation Instructions Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper

More information

Parrot Island Fort Install Manual Version 3.16

Parrot Island Fort Install Manual Version 3.16 Parrot Island Fort Install Manual Version 3.16 Tools Needed for Assembly Tape Measure 4 Level Angle Square Phillips Screw Driver 3/8 Cordless Drill or Electric Drill 3/8 Drive Ratchet or Electric Impact

More information

Install Instructions. NewAge Steel Welded Tall Locker

Install Instructions. NewAge Steel Welded Tall Locker Kit Contains Full Width Adjustable Steel Shelves (4) Height-Adjustable Steel Leveling Legs (4) Aluminum Door Trim (2) 2.5 x ¼ Cabinet Mounting Lag Bolts (4) Large Zinc Plated Mounting Washers (4) 5/8 x

More information

Tilting, Swiveling & Rotating Flat Panel Wall Mount

Tilting, Swiveling & Rotating Flat Panel Wall Mount Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical

More information