VENTILATION PRODUCTS. (800) Pro-Master Ridge Vents & Standard Box Vents. AccuVent Soffit Insulation Baffle

Transcription

1 VENTILATION PRODUCTS Pro-Master Ridge Vents & Standard Box Vents AccuVent Soffit Insulation Baffle Soffit, Fascia and Accessories BERGER BUILDING PRODUCTS, INC. (800)

2 Highpoint Series 5 Ridge Vent A Low Profile, Shingle-Over Ridge Vent that Provides Maximum Venting for Shingle, Tile or Metal Roofing PRO-MASTER HIGHPOINT SERIES 5 RIDGE VENT FEATURES: Made from durable, heavyweight, black UV stabilized polypropylene Pre-formed nail holes & self-closing ends 18 sq. in. per lineal foot of net free ventilating area Easy to install & no filters to clog 40 Year Limited Warranty Raises ridge cap less than one inch & conforms to varying roof pitches No connectors, straps or gaskets needed Packaged 12 pieces per carton, stackable for trucking & warehousing Piece weight: 2.25 lb. - 4 ft. long / Carton weight: lb lineal ft. 16 Cartons per pallet lineal ft. (486 lbs.) Part #HPS5RV (Black)

3 Highpoint Series 7 Ridge Vent A High Performance, Low Profile Shingle-Over Ridge Vent that Provides Maximum Venting in all Wind Conditions PRO-MASTER HIGHPOINT SERIES 7 RIDGE VENT FEATURES: Made from black UV stabilized polypropylene Designed to withstand dramatic temperature changes, resist stress & extreme loads 9 sq. in. per lineal foot of net free ventilating area No filters to clog Easy to install Gun nailable using standard 1-3/4" ring shank roofing nails Self-closing ends No straps, connectors or gaskets required Provides a low profile economical solution with a height of.505 in. under the cap Vent has internal baffles & exclusive external angled counter baffles for enhanced flow Packaged 28 pieces per carton, stackable for trucking & warehousing Piece weight: 1.6 lb. Size: 11-5/8" w x 47-3/4" l. Width across baffle = 14-7/8" Carton weight: lb lineal ft. 10 Cartons per pallet lineal ft. (527 lbs.)

4 HOW PRO-MASTER HIGHPOINT SERIES 5 & 7 RIDGE VENTS WORK: Pro-Master Highpoint Series 5 and Series 7 Ridge Vents enable attic air to exit which reduces heat and moisture build-up. This helps the shingles last longer and make insulation more effective. They also help reduce energy costs. Pro-Master Highpoint Vents are designed to withstand extreme temperature variations and structural loads. Ridge Cap Shingles Ridge Cap Shingles Pro-Master Highpoint Series 5 Ridge Vent Pro-Master Highpoint Series 5 Ridge Vent Pro-Master Highpoint Series 7 Ridge Vent Pro-Master Highpoint Series 7 Ridge Vent Moist, Hot Attic Air Cool, Fresh Air Enters Through Soffit Vents Roof Sheathing Shingles Moist, Hot Attic Air Cool, Fresh Air Enters Through Soffit Vents Roof Sheathing Shingles PRO-MASTER HIGHPOINT SERIES 5 RIDGE VENT PRO-MASTER HIGHPOINT SERIES 7 RIDGE VENT INSTALLATION INSTRUCTIONS: Pro-Master Highpoint Vents must always be installed with soffit vents of equal or slightly greater area. When installing Pro-Master Highpoint Vents, all other vent openings (except soffits) should be closed off. The slot cut in the roof ridge should only be cut no closer than twelve (12) inches from any junction point such as intersecting roof ridge, chimney, gable or other obstruction. Install vent over entire length of ridge. Roof pitch 3/12 (14 slope min) to 12/12 (45 max). All nails should be ring shank roofing nails to provide maximum pull out resistance against wind uplift. Do not overdrive fasteners. Step 1: Remove ridge cap shingles from the entire length of the ridge. NOTE: Delete Step 1 for new construction. Step 2 for Series 5: Snap chalk line on both sides of the ridge and no more than.750 (3/4) of an inch from the peak. Step 2 for Series 7: Snap chalk line on both sides of the ridge and no more than.375 (3/8) of an inch from the peak. Step 3: Cut along both chalk lines. NOTE: Slot should not be cut any closer than within twelve (12) inches of gable end, hip or intersecting ridge. Step 5: Nail each additional section in the same manner until entire ridge is covered. A second chalk line may be utilized to ensure vent alignment. Cut last piece to length and install with original uncut end to the outside. Be sure to position closure tabs at the end of the ridge. Step 7: Ridge-to-ridge application requires a miter-cut to maintain continuous ridge line appearance. Step 4: For appearance (to blend with the roof line), it is recommended that the Highpoint vent be installed the entire length of the ridge. Position the first piece at one end of the ridge. For Series 5: Using 2-1/2" ring shank roofing nails, for 3/4" roof penetration or penetration through the deck, whichever is less, anchor vent through preformed nail holes.for Series 7: Using 1-3/4" ring shank roofing nails, anchor vent. The closure tabs must be positioned at the end of the ridge. Step 6: For Series 5: Install new ridge cap in normal manner, using 2-1/2" ring shank roofing nails, for 3/4" deck penetration or penetration through the deck, whichever is less. For Series 7: Install new ridge cap in normal manner, using 1-3/4" ring shank roofing nails. For Both Series: Nailing the ridge caps through the vent along the nailing line will secure the vent. Shingles may need to be trimmed. Step 8: Ridge-to-roof application requires a miter-cut to maintain continuous ridge line appearance. Covered by U.S. patents # # Meets or exceeds requirements of FHA, ICBO, SBCCI and BOCA.

5 RIDGE VENTTM Berger's Pro-Master Ridge Vent is manufactured with natural fibers that form a durable, long-lasting and cost effective product which helps decrease cooling/ heating costs and promotes healthy, breathable air. Roll Length Model # Dimension 20 ft. Rolls PMRV /2" x 3/4" x 20' 50 ft. Rolls PMRV /2" x 3/4" x 50' PRO-MASTER RIDGE VENT FEATURES: Environmentally friendly with fibers that are 100% natural. No maintenance or operating costs. 40-year manufacturers warranty. Meets attic ventilation requirements of ALL nationally recognized building codes for ventilation when properly installed with soffit or eave vents. Eliminates unsightly fans and vents. Deters mold and mildew in the attic. Protects roof and shingles from damage due to excessive heat or condensation. An economic and efficient way to ventilate your attic with 15.2 square inches of net free ventilation area per linear foot. Provides uniform ventilation. Classified UL Class A as to external fire exposure. Passes 110 mph independent wind driven rain tests. Won t deteriorate from wind, snow, rain or ice. Easy-to-install and nail. Nails included both hand and power. Both hand & power nails included

6 HOW PRO-MASTER RIDGE VENT WORKS: Pro-Master Ridge Vent Enabling Attic Air to Exit Cap Shingle Pro-Master Ridge Vent Shingles Roof Sheathing Moist, Hot Attic Air Cool, Fresh Air Enters Through Soffit Vents PRO-MASTER RIDGE VENT INSTALLATION: 1. Remove ridge cap shingles along entire length of ridge. 2. a) Measure 1 from ridge peak on each side of ridge. For ridge board construction measure 1-1/2 on each side of ridge. b) Snap chalk line along entire length of ridge. c) Leave a minimum of 12 of sheathing closed at each end of ridge. d) Cut opening in sheathing along ridge. DO NOT CUT through roof trusses or ridge board. e) Remove sheathing to create slot. 3. Tack one end of the Pro-Master Ridge Vent (netting side down) over the slot to hold in place at one end of the ridge. Unroll entire length of vent, pull to remove sags and tack in place so vent is snug and centered over slot. If more than one piece of Ridge Vent is needed, simply butt the multiple pieces together and tack in place with a nail. Cover the entire length of the ridge with vent, including the minimum 12 of unslotted ridge. 4. Install ridge cap shingles directly over Pro-Master Ridge Vent. Fasten shingle and Ridge Vent to roof using galvanized roofing nails supplied with the ridge vent. Please follow power nailing and safety instructions enclosed with coil nails or use hand nails provided. To obtain a uniform look and prevent shingle damage, do NOT drive nails through shingle. Note: This product has a net free ventilation area of 15.2 square inches per linear foot. To operate properly, there must be equal or greater soffit ventilation than ridge ventilation. Installation Tips Hip Roof Installation Cut the slot along the ridge to within 12 inches of the end of the ridge. Install Pro-Master Ridge Vent along the entire length of the ridge. Do not cut slots or install Ridge Vent along the hips of the roof. Obstruction Along Ridge Cut the slots along the ridge to within 12 inches of each side of the obstruction. Install Pro-Master Ridge Vent along the ridge, butting up against the obstruction. T and L Style Roofs Cut slots along the ridge to within 12 inches of each side of the ridge intersections. First install Pro-Master Ridge Vent along the entire long run of the ridge. Then install it along the short run of the ridge so the ridge vent butts up against the Pro-Master Ridge Vent already installed on the long run. Pro-Master Ridge Vent Technical Specifications - Patent No. 6,343,985 Material Composition: Material is composed of natural fibers on a polyester mat joined with latex binding agents plus carbon black for UV resistance. Codes Met: ICC* (report ESR-1218) Texas Department of Insurance (report RV-33) Miami-Dade, FL (NOA No ) UL Class A - Ridge Vents (TGEW) Florida Building Code (FL2891) Testing: Architectural Testing, Inc., York, PA SGS U.S. Testing Co., Inc., Hoboken, NJ PRI Asphalt Technologies, Tampa, FL ETC Laboratories, NY * The ICC now has the BOCA, ICBO and SBCCI merged into the ICC code.

7 Standard Box Vent A B C Available in 4 colors & designed to fit any roof pitch, Pro-Master Standard Box Vents will both ventilate your attic & help extend the life of your roof! D PRO-MASTER STANDARD BOX VENTS FEATURE: Made from durable scratch & dent resistant polypropylene Three pre-punched nail holes for easy installation Net free vent area: 50 sq. in. One vent needed for every 52 sq. ft. of attic floor 10 Year Warranty Packaged 10 pieces per color per carton, stackable 3 pallets high Piece weight: 1.77 lb. / Carton weight: lb. (185 lbs. per pallet) Available in 4 colors: A) Grey: Part #SBV5GR, B) Brown: Part #SBV5BR, C) Black: Part #SBV5BK, D) Weatherwood: Part #SBV5WW

8 AccuVent Attic Ventilation Superior Quality AccuVent Soffit Insulation Baffle is Built to Last! Size Model # Packaging Skid 41" x 22.5" ACCUVENT 50 pcs./ bundle 2,800 pcs./ 56 bundles ACCUVENT SOFFIT INSULATION BAFFLE FEATURES: Easy to install with only six staples One step, labor saving installation no additional stuffing of fiberglass required Non-porous 100% recycled PVC does not allow air penetration into fibrous or blown insulation Unique design allows insulation to cover the entire outer wall of the structure Keeps insulation from getting into the soffit Allows 25.3 square inches of air flow into the attic Versatile fit any roof pitch and truss size Perforated to easily adjust to roof truss spacing Flame retardant and self-extinguishing in less than 5 seconds AccuVent does not absorb moisture and will deter the growth of mold Easy to transport and store at the jobsite AccuVent vs. foam and cardboard vent systems Space saving AccuVent - 88 pcs. shown here at 5" high

9 Soffit, Fascia and Accessories ALUMINUM SOFFIT, FASCIA & ACCESSORIES Berger Soffit, Fascia and Accessories are available in a wide variety of styles and sizes to meet your customers needs. Berger Soffit Systems are made from premium gauge aluminum with a baked on finish that is warranted against cracking, chipping, warping, rotting, peeling and rusting. Berger Soffit, Fascia and Accessories will stand up to the toughest weather conditions while maintaining a neat, clean and sturdy appearance. They will also provide proper ventilation to prevent damaging moisture accumulation. Energy Efficiency Proper attic ventilation is critical in today s energy efficient homes. It is necessary to promote uniform circulation to reduce heat build-up and humidity. Berger Soffit Systems facilitates energy savings and provides more effective thermal control. It also reduces the potential for ice dams. SOFFIT SPECIFICATIONS Soffit is your best defense against the problem of unsightly and deteriorating eaves. Our Soffit eliminates the back breaking work in maintaining a homes overhangs. No more scrapping, painting and unsightly peeling of paint when the right Soffit System from Berger is installed. (NOT FOR USE AS VERTICAL SIDING) 12" PRO LOCK V-Groove 16 oz. Copper SPECIAL ORDER - CALL FOR QUOTE SOLID (Non-Ventilated) VENTILATED (Net Free Air = 8.8 in 2 /ft 2 ) PRO LOCK SYSTEM 10" QLOK.019 Gauge Aluminum Soffit PACKAGING: 120'/ctn. 1 sqs./ctn. 10 pcs./ctn. COLORS: White, Royal Brown, Light Bronze, Dark Bronze, Clay and Black SOLID (Non-Ventilated) VENTILATED (Net Free Air = 9.6 in 2 /ft 2 ) QLOK SYSTEM

10 15" QLOK.019 Gauge Aluminum Soffit PACKAGING: 120'/ctn. 1.5 sqs./ctn. 12 pcs./ctn. COLORS: White and Royal Brown SOLID (Non-Ventilated) VENTILATED (Net Free Air = 4.8 in 2 /ft 2 ) QLOK SYSTEM 12" TRAPLOK.019 Gauge Aluminum Soffit PACKAGING: 120'/ctn. 1.2 sqs./ctn. 10 pcs./ctn. COLORS: White, Royal Brown, Classic Creme and Dark Bronze SOLID (Non-Ventilated) VENTILATED (Net Free Air = 3.5 in 2 /ft 2 ) TRAPLOK SYSTEM FASCIA SPECIFICATIONS Berger manufacturers a full line of aluminum Fascia trim for the protection of the homes Fascia board, which runs along the entire eave of the roof. Unprotected wooden Fascia board can easily dry rot, crack and become a costly expense to maintain. Fascia from Berger is made of.024 gauge precision framed panels that interlock for a straight finished appearance. The same durability and maintenance-free protection can be matched with Berger Soffit, Channels, Gutters and Downspouts to shield your home form the elements..024 Gauge Aluminum Fascia PACKAGING: 300 ft./ctn. 25 pcs./ctn. CONFIGURATION: 1" reveal top and bottom with 1/8" beads, 2" on center EXPOSURE: 4", 6", 8" or COLORS: 4", 8" and 10" available in White and Royal Brown 6" available in White, Royal Brown, Clay, Dark Bronze and Musket Brown ADDITIONAL: 6" in.019 Gauge Aluminum Fascia available in White, Prairie Sand, Granite Gray, Sandstone Beige, Ivy Green, Desert Tan, Light Bronze, Natural Clay and Clay EMBOSSED FASCIA: 4", 6" and 8" available in White upon request. Call for more information and samples. 4" 2 beads 6" 3 beads 8" 4 beads 10" 5 beads 8" Embossed Fascia

11 ACCESSORIES TO COMPLETE THE LOOK Berger F Channel and J Channels help your contractor finish the job. These products provide maximum wall support for all your Soffit Systems..019 Gauge Aluminum 1/2 "F" Channel PACKAGING: 300 ft./ctn. 25 pcs./ctn. COLORS: White, Royal Brown, Dark Bronze, Clay and Light Bronze.019 Gauge Aluminum 1/2 "J" Channel PACKAGING: 600 ft./ctn. 50 pcs./ctn. COLORS: White, Royal Brown, Dark Bronze, Clay, Black, Desert Tan, Classic Creme, Copper, Sandstone Beige and Light Bronze.019 Gauge Aluminum Economy 1/2 "J" Channel PACKAGING: 600 ft./ctn. 50 pcs./ctn. COLORS: White and Royal Brown.019 Gauge Aluminum 3/4 "J" Channel PACKAGING: 600 ft./ctn. 50 pcs./ctn. COLORS: White and Royal Brown.019 Gauge Aluminum Soffit Crown Moulding PACKAGING: 300 ft./ctn. 25 pcs./ctn. COLORS: White Aluminum Soffit /Utility Trim PACKAGING: 600 ft./ctn. 50 pcs./ctn. COLORS: White

12 FASCIA & SOFFIT INSTALLATION INSTRUCTIONS Fascia For Installations Without Soffit 1) Nail undersill trim or drip edge in place along the top of the fascia board. 2) Hook the bottom of the fascia panel under the bottom of the fascia board. Push the top edge into the undersill trim (as shown in illustration 1), or behind drip edge. 3) Secure the panel to the bottom of the fascia board with painted aluminum trim nails. Always nail underside of fascia as shown. Never face nail fascia. *Keep nails lined up with soffit V-grooves for best appearance. Nail every 24", but do not nail too tight. Nails should penetrate a minimum of 3/4" into nailing surface. Pre-drilling hole slightly larger than nail diameter is recommended. 4) When overlapping fascia panels, first cut a notch in the underlying panel. The notch should be 1-1/2" long. Slip the notched panel into the adjacent panel (see illus. 2). 5) For Outside Corner Fascia: Bend a 1" flange on the first fascia piece, 90 degrees around the corner. Cut overlapping fascia at 45 degree angle. Nail with painted aluminum trim nails (see illus. 3). Inside Corner Fascia: Use the same technique that was used for the outside corner fascia, but bend in the opposite direction to form an inside corner shape. Face nailing can result in a wavy or buckled appearance during thermal expansion and contraction cycles. Always use a drip edge, gutter, or all-purpose trim to receive cut top edge of fascia. This provides a neat appearance and protects the substrate material from moisture. For Installations That Include Soffit Complete step 1 from above. The fascia panel may need to be rip cut to fit over the fascia board and secure soffit. To determine width of the panel, measure from slot in undersill trim to bottom of F-channel or soffit face. Deduct 1/4" and cut (illus. 4). OPTIONAL: Use a snap lock punch to create tabs 1/8" below cut edge. Punch tabs every 6", with tab raised on outside face of panel. Install the panel by hooking the bottom of the fascia panel under the F-channel and pushing the top into the undersill trim or drip edge (shown in illus. 4). Follow steps 3, 4, 5 above to complete installation. 5a 5c 6 7 Soffit 5b Installations Over Open Eaves 1) Install receiving channels (F-receiver or J-channel). There are several ways to install receiving channels for soffit. You can use accessories such as F- receiver or J-channel. Select a method that works most effectively with the construction techniques used to create the eave. 5d Examine the layouts 5a through 5d in the illustration to the left and find the one that most closely resembles the construction methods used on your particular project. Recommended nailing for soffit is 16" o.c.; however, if the eave span is 24" or more, you must install nailing strips as shown in the last illustration 5d. In areas with high wind or in a location that s over 20 ft. above ground, do not exceed 12" on center. Install the receiving channels following the details shown in illus. 5a-d. Nail channels every 16". 2) Measure from the wall to the fascia board. Then subtract 1/4" - 3/8" to allow for expansion. Once a soffit panel is face nailed, it will expand only in one direction. Be sure to leave space for the full expansion allowance in the receiving allowance. 3) Insert the panel into the channel on the wall, then into the panel at the fascia board. You may have to flex the panel slightly to insert it into the second channel. Make certain the panel is perpendicular to wall, then nail. Depending on the installation method you re using, you ll nail either to a nailing strip or to the fascia board. If you re nailing to the fascia board, use small-headed nails. Drive nail through the nail flange and v groove. This is one of the rare instances face nailing is permissible. (See illustration 6) If your using a nail strip, do not nail tightly - allow movement for expansion. Continue installation by locking and nailing panels. Make certain panels are fully locked along their entire length. 4) To turn a corner, measure from channel at wall corner to channel at corner of fascia board. Subtract 1/4" for expansion. Cut and install H-divide bar. If necessary, install nailing strips to provide backing for the lineal (shown in illus. 7). Miter the corner soffit panels and install as described in step 3. 5) To complete the installation, apply utility trim and fasten aluminum fascia cap with painted aluminum trim nails. If you must face nail fascia, drill holes for trim nails to allow for expansion and reduce denting of aluminum. Face nails are best positioned below the rolled brad in the shadowline. Use a nail punch to avoid hammer face contact with fascia Berger TM BERGER BUILDING PRODUCTS, INC. 805 Pennsylvania Blvd. Feasterville, PA (800) (215) Fax: (215)