Pole Conversion System For safe and efficient conversion of non-lowering light poles.

Size: px
Start display at page:

Download "Pole Conversion System For safe and efficient conversion of non-lowering light poles."

Transcription

1 Conversion System USER GUIDE: OVERVIEW The Swivelpole Conversion Tool clamps onto the existing non-lowering pole and safely supports the pole during a cold cut with the Ratchet Pipe Cutter, eliminating the need for Hot Work Permits. USER GUIDE The safety pin is then removed from the mid-hinge. This allows lowering of the pole top without the need to disturb the integrity of the existing wiring system. PCT-RPC-01 (c/w 1 x Fitted Blade & 1 x Spare Blade) The Safe Swivel Joint then simply slips onto the existing pole base. The new or existing pole top, along with the fixture is inserted back into the Safe Swivel Joint, and the Swivelpole conversion is complete. All work takes place at platform level, eliminating the risks of working at heights. PCT-01 PCT-MG-01 PCT-SKWR OIL* Conversion Tool Kit (PCTK- 01) Tools recommended for converting poles on Brownfield sites. Product and Ordering Information All Kits include 1 x Conversion Tool PCT-01 PCT Clamps suit pole sizes: NPS DN OD 11/ / PCTK Product Code Page 1 (c/w 1 PCT-RGB-01 PCT-RPC-01-SB 1 x Marking Gauge PCT-MG-01 1 x Ratchet Pipe Cutter PCT-RPC-01 3 x Spare Blades PCT-RPC-01-SB 1 x Socket Wrench PCT-SKWR 1 x Riggers Bag PCT-RGB-01 Note: Tools are available for conversion of PVC coated poles. PCT-01 Conversion Tool is structurally Certified (Reference Number: T ) for use with a maximum luminaire weight of 44lb (10 pole). *Multipurpose oil supplied as a consumable in Kit only, not to be supplied separately. Product Warranty: All equipment and goods are warranted by the seller to be free from defects in material and workmanship for five (5) years from the date of shipment. This warranty does not apply to equipment or goods which are misused, or abused, or damaged from installation, or not used in accordance with seller s instructions. Normal wear of equipment or goods is not included in this warranty. No responsibility will be taken for any modifications, alterations or additions to the standard product design. This includes exceeding recommended maximum weights for any fittings or exceeding the installed height.

2 Conversion System USER GUIDE: NOTES The Swivelpole Conversion System incorporates the use of: Conversion Tool Kit Safe Swivel Joint Copyright and Patent Pending Swivelpole Group Pty Ltd General Notes: POLE CONVERSION SYSTEM Certification: The Conversion Tool (PCT-01) is structurally Certified for use with a maximum fixture weight of 44lb (10 pole). R PCTK Lanyards are provided for your safety. Isolation of Power: Onsite safe working procedures should be followed to locate and isolate power circuits at the switchboard. Drawings: Copies of Assembly Drawings are available online at swivelpole.com. R1 Conversion (Re-using existing pole) R2 Conversion (Renewing pole top) Marking Gauge Conversion Tool Copyright and Patent: The Swivelpole Product range is protected by patents and registered designs worldwide. Socket Wrench Ordering Information: Please sales@swivelpole.com Ratchet Pipe Cutter R- SERIES CONVERSIONS POLE CONVERSION TOOL KIT 1.0 Conversion Tool Notes: 1.1 The Conversion Tool Kit (PCTK) includes a Conversion Tool, Marking Gauge, Socket Wrench, Ratchet Pipe Cutter, two spare Ratchet Cutter Blades, Oil, Riggers Bag and Instructions. 1.2 The Conversion Tool (PCT) has been designed with a 4 offset mid hinge. This is to allow flexibility around mounting brackets. 1.3 The PCT can be attached either inside or outside of the guardrail. If the PCT will not align correctly on the RIGHT (due to the mounting brackets), rotate the PCT 180-degrees and attach it to the LEFT of the stanchion. 1.4 The PCT identification labels must always face the operator. The Marking Gauge must be used on the same side as the PCT will be used. 1.5 For an R1 conversion, use the R1 indicators on the Marking Gauge. 1.6 For an R2 conversion, use the R2 indicators on the Marking Gauge. Page 2

3 Conversion System USER GUIDE: R1 and R2 Conversions 2.0 Attaching the PCT and Cutting the 2.1 Decide which direction you will need the PCT to face see note Place the Marking Gauge on top of the guard rail, against the fixed pole. 2.3 Use the Marking Gauge indicators to mark the pole depending on whether completing an R1 or R2 conversion. Note: The R1 conversion requires three marks, one for the PCT Clamp Location and two for cutting the pole. Whereas an R2 conversion will require only two marks, one for the PCT Clamp Location and one for cutting. 2.4 Attach the PCT safety lanyard to the guardrail. Align the top edge of the upper PCT Clamp with the top mark on the pole and hand tighten the Clamp Bolts. 2.5 Use the Socket Wrench to tighten clamp bolts firmly. 2.6 Align the Ratchet Pipe Cutter to the top mark, place a drop of Oil on the blade and cut the pole according to the Ratchet Pipe Cutter Instructions. Note: Cut only the top mark at this stage of the conversion. Be sure to hold Ratchet Pipe Cutter horizontally, and avoid any downward pressure when cutting. 2.7 While holding the Top, remove the the Safety Pin from the PCT s Mid Hinge. Gently lower the Top while ensuring there is no tension on the cable. 2.8 Cut through the Plastic Inserts and fit them into the cut ends of the pole sections. 2.9 Disconnect the cable at the Fixture. Loosen the top PCT Clamp and remove the Top. Loosen the bottom PCT Clamp and remove the PCT. Note: The second cut for the R1 conversion, ensures that the pole s original installed height is maintained and enables the existing cable length to be re-used. Top R1 Clamp R1 Cut #1 Marking Gauge Rachet Pipe Cutter PCT Clamp 2.10 Align the Ratchet Pipe Cutter to the bottom cut mark on the pole. Cut according to the Ratchet Pipe Cutter Instructions Remove and discard the offcut BUT keep the Plastic Inserts and fit to the newly cut pole end. Clamp Bolts R1 Cut #2 Base Section Fixture Conversion Tool Safety Pin Plastic Inserts Page 3

4 Conversion System USER GUIDE: R1 and R2 Conversions 3.0 Installation of the (Safe Swivel Joint) 3.1 Remove the tape from around bottom Locking Collar of the Safe Swivel Joint. 3.2 While routing the cable through, place the Safe Swivel Joint onto the Base Section. 3.3 Loosen but do not remove the Joint Bolts. Remove the Safety Pin and swivel the Joint 90-degrees downwards and re-insert the Safety Pin. 3.4 Orientate the Safe Swivel Joint correctly (see Orientation Guide overleaf). Tighten the bottom Grub Screws firmly. (Recommended torque setting 22lb/ft to 25lb/ft). 3.5 Fit Plastic Inserts into the end of the Top Section and feed the cable through it. While holding the Top horizontally, slide it through the R1 Seal into the Safe Swivel Joint. 3.6 Slide the R1 Seal onto Top to reveal the Grub Screws. These should now be tightened firmly. Attach the Fixture as per the manufacturer s instructions. 3.7 Raise the Top while checking for obstructions. Adjust if necessary. Insert Safety Pin and tighten the Joint Bolts evenly and firmly. (Recommended torque setting 30lb/ft to 60 lb/ft). 3.8 The Fixture can be re-orientated by loosening the top Grub Screws and rotating the Top to the desired direction. Adjust orientation, tighten the Grub Screws and slide the R1 Seal back over the Locking Collar. (Recommended torque setting 22lb/ft to 25lb/ft). R1 R1 R NEC Top Locking Collar Safe Swivel Joint Joint Bolts Safety Pin R1 Seal Grub Screws Plastic Insert Fixture Base Section Page 4

5 Safe Swivel Joint: Orientation & Motion Path Safe Swivel Joint Orientation and Motion Path IMPORTANT: Safe Swivel Joint allows clockwise or counter-clockwise orientation at any degree from the guardrail, with lowering operation to either side to clear any obstruction. Stanchion mounted 0 orientation Stanchion mounted 45 counter-clockwise Structure mounted 90 counter-clockwise Column mounted 90 clockwise orientation 0 Safe Swivel Joint orientation Orientation clearing obstruction behind the guardrail and to the right side Safe Swivel Joint orientation Clockwise orientation clearing obstruction to the left side. 30 Clockwise 75 Safe Swivel Joint orientation Clockwise orientation clearing obstruction behind the guardrail and to either side. 75 Clockwise 90 Safe Swivel Joint orientation Counter-clockwise orientation clearing obstruction behind the guardrail and to the right side. 90 Counter-clockwise Page 5

6 Ratchet Pipe Cutter (PCT-RPC- 01) For safe and efficient conversion of non-lowering light poles. OPERATING INSTRUCTIONS The Ratchet Cutter is designed to allow easy cutting in tight spaces. Cutting is possible with just an 8 swing of the handle. As the handle grip is moved forward and backward the rotary head turns and automatically feeds the cutting blade until pipe is cut. Important Notes: Ensure you have read and understood the step by step directions on using the Conversion Tools. CAUTION: Ensure safety lanyard is connected to guardrail and PCT clamps are tight. For technical enquiries, info@swivelpole.com. Moving angle 8 How to use Ratchet Pipe Cutter 1. Before use, ensure any PVC coating is removed before cutting. 2. Turn the rotary head to fit the main body and the opening section of rotary head. Cog Rotary Head Radius gyration 90 How to change Cutter If cutter interferes with inserting pipe in the opening, turn the Cog and move the cutter until pipe can be inserted. 4. Fit the pipe on the roller, turn the Cog until it gets a little tight, and pinch the pipe with the cutter. Do not over tighten. 5. If you move the grip forward and backward, rotary head turns and with automatic cutter feeding mechanism, pipe is cut. CAUTION Clockwise Cutter To avoid blade failure: Ensure that the tool is cutting straight. Apply cutting oil to blade prior to each cut. Do not exceed 90 movement of handle grip in each backward and forward stroke. Counterclockwise Roller Turn Cog until attachment Cog can be seen. 2. Remove clip ring. 3. Remove attachment pin. 4. Remove cutter. 5. Replace cutter and follow reverse order for securing pin and clip ring. Be sure to apply grease (molybdenum grease) to attachment pin when cutter is changed. Important Notes: Max. diameter cut: 2.6 Max. wall thickness: Carbon Steel Stainless Steel Ratchet Pipe Cutter is supplied with three spare blades. If used in accordance with instructions and cutting lubricant, blades can last in excess of 50 cuts. 1. Attachment pin Clip ring Page 6

Self-assembly and pole conversion system

Self-assembly and pole conversion system User Manual Self-assembly and pole conversion system Swivelpole R11, R12 and R13 for self-assembly of lowering poles on greenfield projects or conversion of non-lowering poles on brownfield facilities.

More information

STRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved

STRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved 6002 STRINGING MACHINE OWNER'S MANUAL Issue 3 - June 20, 1998 Copyright 1998 GAMMA Sports - All Rights Reserved 6002 OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... FEATURES PAGE 3... ASSEMBLY

More information

Single and Double Gates Operation & Maintenance Manual

Single and Double Gates Operation & Maintenance Manual R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent

More information

MUELLER GAS. DH-5 Drilling Machine. For use on 1 1 /2 & 2 Line Stopper Fittings. Reliable Connections. General Information 2

MUELLER GAS. DH-5 Drilling Machine. For use on 1 1 /2 & 2 Line Stopper Fittings. Reliable Connections. General Information 2 operating Instructions manual MUELLER GAS TAble of contents PAGE DH-5 Drilling Machine For use on 1 1 /2 & 2 Line Stopper Fittings General Information 2 Installing and Stopping-off 1 1 /2 and 2 Line Stopper

More information

AUC Cell Assembly Torque Stand. User Manual

AUC Cell Assembly Torque Stand. User Manual AUC Cell Assembly Torque Stand User Manual WARRANTY Spin Analytical Inc., warrants this product to be defect free in both material and workmanship for 90 days from the date of shipment. Labor services

More information

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /

More information

N. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS

N. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS 1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-0800 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Articulating TV/Monitor Grommet/Clamp Desk Mount Model: DE300S (Butterfly Series)

Articulating TV/Monitor Grommet/Clamp Desk Mount Model: DE300S (Butterfly Series) t Articulating TV/Monitor Grommet/Clamp Desk Mount Model: DE300S (Butterfly Series) Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-1300 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Quick Set Dovetail Jig

Quick Set Dovetail Jig Quick Set Dovetail Jig FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500359 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS

400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS 12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions

More information

HAND CRIMP TOOL SPECIFICATION SHEET Order No

HAND CRIMP TOOL SPECIFICATION SHEET Order No HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-5200 TYPE 2C FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information

Single and Double Gates Operation & Maintenance Manual

Single and Double Gates Operation & Maintenance Manual R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent

More information

4-8 HSF 250 Patriot. Line Stop Fitting Installation Instructions. Installation Instructions and Best Practices continued on back

4-8 HSF 250 Patriot. Line Stop Fitting Installation Instructions. Installation Instructions and Best Practices continued on back HSF 250 Patriot Heavy Duty Line Stop Fitting - 4, 6, 8 inch Nominal Sizes Line Stop Fitting Installation Instructions Push and Pin Completion Plug Installation Instructions IMPORTANT: Read installation

More information

ABM International, Inc. Navigator Assembly Manual

ABM International, Inc. Navigator Assembly Manual ABM International, Inc. 1 1.0: Parts List Tablet (Qty. 1) Tablet mount (Qty. 1) NOTE: Mount may appear and operate different then image below Control Box (Qty. 1) Motor Power Supply (Qty. 1) 2 X-axis motor

More information

3.2.3 Rear Door Window and Quarter Window Carrier Assembly

3.2.3 Rear Door Window and Quarter Window Carrier Assembly Tighten all bolts. Tighten bolts marked -1- and -2- in specified sequence. Tightening torque: 8 Nm Remaining bolts can be tightened in any sequence. Insert door window -3- through window recess without

More information

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards. Installation Instructions for Fortress Horizontal Cable Panel System with UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all

More information

INSTALLATION INSTRUCTIONS for DALTON LED SERIES

INSTALLATION INSTRUCTIONS for DALTON LED SERIES WINSCAPE INSTALLATION INSTRUCTIONS for DALTON LED SERIES These instructions cover the installation for the following fixtures & options: - Dalton LED (DALED, DABRLED) series - Any Modified or Custom fixture

More information

Single and Double Gates Operation & Maintenance Manual

Single and Double Gates Operation & Maintenance Manual R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual 2 System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent

More information

OPERATION, PARTS & MAINTENANCE MANUAL MODELS HB73-16 HB97-18 HB97-16 HB97-12 HB HB HB HB145-18

OPERATION, PARTS & MAINTENANCE MANUAL MODELS HB73-16 HB97-18 HB97-16 HB97-12 HB HB HB HB145-18 OPERATION, PARTS & MAINTENANCE MANUAL MODELS HB73-16 HB97-18 HB97-16 HB97-12 HB121-18 HB121-16 HB121-14 HB145-18 Proudly Made in the USA 2 3 4 FOREWORD This manual has been prepared for the owner and operators

More information

HAND CRIMP TOOL SPECIFICATION SHEET Order No (Replaces (HTR1031E) And (HTR1031E1))

HAND CRIMP TOOL SPECIFICATION SHEET Order No (Replaces (HTR1031E) And (HTR1031E1)) HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-3200 (Replaces 11-01-0084 (HTR1031E) And 11-01-0211 (HTR1031E1)) TYPE 2C SCOPE Terminal Wire Size Insulation Diameter Strip Length AWG mm² mm In. mm

More information

INSTRUCTION MANUAL. Lathe Duplicator MODEL North Glenn Road, Casper, Wyoming woodworker.com

INSTRUCTION MANUAL. Lathe Duplicator MODEL North Glenn Road, Casper, Wyoming woodworker.com 140-069LatheDuplictr(1/12) 10/30/06 8:20 AM Page 1 INSTRUCTION MANUAL Lathe Duplicator MODEL 140-069 1108 North Glenn Road, Casper, Wyoming 82601 1-800-645-9292 woodworker.com 140-069LatheDuplictr(1/12)

More information

Hand Crimp Tool Specification Sheet Order No

Hand Crimp Tool Specification Sheet Order No Hand Crimp Tool Specification Sheet Order No. 63811-7400 FEATURES ΠA full cycle ratcheting hand tool ensures complete crimps ΠErgonomic soft grip handles for comfortable crimping ΠA precision user-friendly

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0400 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions

Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions INTRODUCTION Congratulations! You are the owner of the finest rotary-style gasket cutter in the world. Originally developed and patented

More information

Inde-Pendants Family. 32L Ring Plaster Trim, Grid and Drywall Ceiling Types. Document No Installation instructions for 32L-Rxx-P

Inde-Pendants Family. 32L Ring Plaster Trim, Grid and Drywall Ceiling Types. Document No Installation instructions for 32L-Rxx-P Inde-Pendants Family 32L Ring Plaster Trim, Grid and Drywall Ceiling Types Installation instructions for 32L-Rxx-P Document No. Supplied by Litecontrol 32L Inde-Pendants: Ring (Plaster Trim, Grid and Drywall

More information

INSTRUCTION SHEET STRUT DRIVER RETROFIT KIT PN: 22-79SDRF

INSTRUCTION SHEET STRUT DRIVER RETROFIT KIT PN: 22-79SDRF INSTRUCTION SHEET STRUT DRIVER RETROFIT KIT PN: 22-79SDRF COMPONENTS: - Note: Each kit comes with one Strut Driver Gear Case Assembly, one Strut Driver Tube End Adapter Assembly, and a One-Time-Use Threadlocker

More information

Application Tooling Specification

Application Tooling Specification Order No. 63828-1200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly

More information

Single and Double Gates Operation & Maintenance Manual

Single and Double Gates Operation & Maintenance Manual R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent

More information

Cordless Ultra-Lok Tool

Cordless Ultra-Lok Tool Operating Instructions Cordless Table of Contents Warranty, Safety Guidelines 2 Setup Instructions 3-4 Settings 5 Parts List and Accessories 6 Tool Head Exploded Views 7-8 Clamp Application Free-End 9

More information

White Industries Front Hub Instructions

White Industries Front Hub Instructions White Industries Front Hub Instructions Tools required: 2mm hex/allen wrench, set of sockets, mallet, bearing puller, bearing press. Disassembly 1. Loosen the set screws, there are three or one depending

More information

25000 Series Lo-T TM Butterfly Control Valve Instructions

25000 Series Lo-T TM Butterfly Control Valve Instructions November 2001 25000 Series Lo-T TM Butterfly Control Valve Instructions Instruction No. 25.1:IM PRELIMINARY STEPS Before installation, note the flow direction arrow on the valve body. The flow should enter

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-1000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63828-0200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8100 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Cut-True 16M Manual Paper Cutter

Cut-True 16M Manual Paper Cutter Cut-True 16M Manual Paper Cutter 2/2013 OPERATOR MANUAL FIRST EDITION TABLE OF CONTENTS TOPIC PAGE Specifications 1 Safety Guidelines 1 Assembly 2 Overview 3 Description of Equipment Parts 3-4 Operation

More information

Hydrajaws Safety Lifeline Tester

Hydrajaws Safety Lifeline Tester Hydrajaws Safety Lifeline Tester Operating Instructions HYDR AJAWS LIMITED Hydrajaws Safety Lifeline Tester 4 5 1 6 7 2 3 9 10 8 12 11 TECHNICAL SPECIFICATIONS Load Gauges Range available: Analogue: 0-25kN/lb/f

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63811-8700 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63819-0300 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

MUELLER E-5TM. and D-5TM. Drilling Machines. Reliable Connections. E-5 General Information 2. D-5 General Information 3. Operating Instructions 4-5

MUELLER E-5TM. and D-5TM. Drilling Machines. Reliable Connections. E-5 General Information 2. D-5 General Information 3. Operating Instructions 4-5 operation Instructions manual MUELLER E-5TM and D-5TM TAble of contents PAGE E-5 General Information 2 Drilling Machines D-5 General Information 3 Operating Instructions 4-5 E-5 Parts 6 D-5 Parts 7! WARNING:

More information

1.0 Tool Components and Operation Instructions

1.0 Tool Components and Operation Instructions DBS-2200 MANUAL BANDING TOOL FOR 1/8 STAMPED BUCKLE BANDS DATASHEET SEE PAGE 18 FOR IMPORTANT INFORMATION CONCERNING LIMITED WARRANTY AND LIMITATION OF LIABILITY. INTRODUCTION The Daniels DBS-2200 (M81306/1B)

More information

Hand Crimp Tool Specification Sheet Order No Replaces (HTR1031E) And (HTR1031E1)

Hand Crimp Tool Specification Sheet Order No Replaces (HTR1031E) And (HTR1031E1) Hand Crimp Tool Specification Sheet Order No. 63811-3200 Replaces 11-01-0084 (HTR1031E) And 11-01-0211 (HTR1031E1) TYPE 2C FEATURES ΠΠΠΠA full cycle ratcheting hand tool ensures complete crimps Ergonomic

More information

Kee Gate Operation & Maintenance Manual

Kee Gate Operation & Maintenance Manual R E L I A B L E S A F E A C C E S S Kee Gate Operation & Maintenance Manual 2 Kee Gate System Overview KEE SAFETY S SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0900 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Crestline Dampening System. Installation Instructions. 4 ROLL DAMPENER Ryobi 3302M Itek 3985 A.B. Dick 9985 X /98

Crestline Dampening System. Installation Instructions. 4 ROLL DAMPENER Ryobi 3302M Itek 3985 A.B. Dick 9985 X /98 Crestline Dampening System Installation Instructions 4 ROLL DAMPENER Ryobi 3302M Itek 3985 A.B. Dick 9985 X88-49 1/98 GENERAL INFORMATION ATTENTION CRESTLINE DAMPENER OWNER! Accel Graphic Systems provides

More information

MANUAL PLASTIC STRAPPING TOOL MODEL P404

MANUAL PLASTIC STRAPPING TOOL MODEL P404 OPERATION MANUAL / SPARE PARTS LIST MANUAL PLASTIC STRAPPING TOOL MODEL P404 43.0404.02 43040402.en/MAS/ 12.05 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 TECHNICAL DATA 3 3 OPERATION ELEMENTS 4 4 ADJUSTMENT

More information

MB-105 BENDER INSTRUCTION SET PRO-TOOLS 7616 INDUSTRIAL LANE TAMPA, FLORIDA PHONE FAX

MB-105 BENDER INSTRUCTION SET PRO-TOOLS 7616 INDUSTRIAL LANE TAMPA, FLORIDA PHONE FAX MB-105 BENDER INSTRUCTION SET PRO-TOOLS 7616 INDUSTRIAL LANE TAMPA, FLORIDA 33637-6715 813-986-9000 PHONE 813-985-6588 FAX ASSEMBLY INSTRUCTIONS IN THE FOLLOWING INSTRUCTIONS WE WILL EXPLAIN THE ASSEMBLY

More information

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.

Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards. Installation Instructions for FortressCable H-Series Stair Panels with Simplified Stair Bracket SSB-05 and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and

More information

MSR/MSB Mechanical Setting Tool

MSR/MSB Mechanical Setting Tool Tech Unit No: 0620000004 Revision: B Approved By: Quality Engineer Date: 2014-12-16 MSR/MSB Mechanical Setting Tool FEATURES: Special designed Bow Spring provides positive control and allows one size Mechanical

More information

Single and Double Gates Operation & Maintenance Manual

Single and Double Gates Operation & Maintenance Manual R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual 2 System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent

More information

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extention Sections. Reliable Connections

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extention Sections. Reliable Connections insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extention 2-3 Improved Fire Hydrant Inserting Extention

More information

Application Tooling Specification

Application Tooling Specification Order No. 63819-0901 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-2400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

ELECTRIC TOOL CORPORATION

ELECTRIC TOOL CORPORATION Cat. No. -0 / Hex Demolition Hammer Cat. No. 0-0 Spline Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 -9-00 d 000 -9-00 d SpecialTools Require Forcing discs

More information

TITAN2-EDGE Public Access Computer Station Dual Track

TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63827-1500 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63819-0100 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Water Line and Water Line Assembly Gasket

Water Line and Water Line Assembly Gasket 1 Preparation for Repair 1) Remove tip from scaler 2) Remove scaler from air supply 3) Remove gasket from back end of scaler. Examine gasket for obvious wear or disfigurement. Replace if necessary. 2 Remove

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0900 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Tilting, Swiveling & Rotating Flat Panel Wall Mount

Tilting, Swiveling & Rotating Flat Panel Wall Mount Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63827-7500 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Model Assembly & Operating Instructions

Model Assembly & Operating Instructions 30 SHEAR BRAKE ROLL Model 05907 Assembly & Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the

More information

Order Number

Order Number Order Number 200218-5500 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information

th St N Oak Park Heights, MN Phone: Fax:

th St N Oak Park Heights, MN Phone: Fax: 12430 55 th St N Oak Park Heights, MN 55082 Phone: 651.342.1756 Fax: 651.342.1293 Email: info@diacro.com SAFETY INFORMATION PG. 3 MAINTENANCE PG. 3 #4 BENDER BREAKDOWN AND PARTS LIST PG. 4-6 QUIK-LOK BREAKDOWN

More information

Replacing the build plate clamps

Replacing the build plate clamps Repair manual Replacing the build plate clamps Instructions The build plate clamps hold the glass plate in place on the heated bed. There are two fixed in place at the back of the heated bed and two at

More information

INSTRUCTION MANUAL DWX723-XE HEAVY-DUTY MITER SAW STAND FINAL PAGE SIZE : 8.5IN X 5.5IN

INSTRUCTION MANUAL DWX723-XE HEAVY-DUTY MITER SAW STAND FINAL PAGE SIZE : 8.5IN X 5.5IN INSTRUCTION MANUAL DWX723-XE HEAVY-DUTY MITER SAW STAND FINAL PAGE SIZE : 8.5IN X 5.5IN DWX723-XE MITER SAW STANDS Components List A. Beam B. DW7231 Miter saw mounting brackets C. Extension arm D. DW7232

More information

Product #: Product #:

Product #: Product #: STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws

More information

Gared Pro-S Portable Backstop

Gared Pro-S Portable Backstop Models: 9616 & 9618 Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE USE PUBLICATION

More information

Application Tooling Specification

Application Tooling Specification Order No. 200218-2200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63827-1400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

INSTALLATION & OPERATING INSTRUCTIONS. REDCO LETTUCE KING I and LETTUCE KING IV

INSTALLATION & OPERATING INSTRUCTIONS. REDCO LETTUCE KING I and LETTUCE KING IV INSTALLATION & OPERATING INSTRUCTIONS for REDCO LETTUCE KING I and LETTUCE KING IV Lettuce King I Shown with optional Drum Ring Lettuce King IV TO BE SERVICED ONLY BY AUTHORIZED PERSONS P/N: 2802381 REV:

More information

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extension Sections. Reliable Connections

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extension Sections. Reliable Connections insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extension 2-3 Improved Fire Hydrant Inserting Extension

More information

OPERATION, PARTS & MAINTENANCE MANUAL

OPERATION, PARTS & MAINTENANCE MANUAL Model HB121-16 Shown MODELS HB73-16 HB97-18 HB97-16 HB97-12 HB121-18 HB121-16 HB121-14 HB145-18 OPERATION, PARTS & MAINTENANCE MANUAL Model: Serial #: Purchased From: Date Received: 6926 Smithville Hwy.,

More information

Band-Master ATS Nano Pneumatic Banding Tool Operating Instructions

Band-Master ATS Nano Pneumatic Banding Tool Operating Instructions Band-Master ATS 601-118 Nano Pneumatic Banding Tool CONTENTS 601-118 Overview... 3 Safety.... 5 Initial Tool Set-up... 5 Regulator assembly mounting... 5 Attach tool head to regulator.... 6 Operating instructions...

More information

REGATTA PATH LIGHT (RGP)

REGATTA PATH LIGHT (RGP) NEEDED FOR INSTALLATION: 5/64 & 5/32 Allen Wrench Waterproof Wire Connectors Warning Low Voltage Hot Surface Wear Gloves By Others Gloves IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE THESE INSTALLATION

More information

HAND CRIMP TOOL SPECIFICATION SHEET Order No

HAND CRIMP TOOL SPECIFICATION SHEET Order No HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-6500 TYPE 2C FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information

1 of 2 3/3/2017 4:49 PM

1 of 2 3/3/2017 4:49 PM 1 of 2 3/3/2017 4:49 PM Front Door Window, Assembly Overview 1 - Window guide - Inserted on flange 2 - Door 3 - Inner window recess seal - Inserted on flange 4 - Bolt - 20 Nm 5 - Carrier assembly - Window

More information

Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System. Effectivity: Helicopters manufactured prior to January, 1981

Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System. Effectivity: Helicopters manufactured prior to January, 1981 Page 1 of 12 Date: December 2, 1981 Subject: Models: Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System F-28C and 280C Effectivity: Helicopters manufactured prior to

More information

MM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS MM30 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.

More information

4" METAL BENDER INSTRUCTIONS. Part #20521

4 METAL BENDER INSTRUCTIONS. Part #20521 4" METAL BENDER INSTRUCTIONS Part #20521 The EASTWOOD 4 METAL BENDER is a high quality, industrial style tool capable of generating a powerful 2-1/2 tons of pressing force to create 90 or lesser repeatable

More information

Application Tooling Specification

Application Tooling Specification Order No. 63828-2000 Application Tooling Specification Type 4G FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles

More information

Drill Line Tension Guide User Procedure Manual

Drill Line Tension Guide User Procedure Manual Oilfield Solutions Inc. Drill Line Tension Guide User Procedure Manual Special Instructions I Conditions of Use Reading this user procedure manual prior to use is essential. Slip & Cut, Drill Line Tension

More information

OWNER'S MANUAL Issue 2 - Aug. 27, 1997

OWNER'S MANUAL Issue 2 - Aug. 27, 1997 6002 Es STRINGING MACHINE OWNER'S MANUAL Issue 2 - Aug. 27, 1997 Copyright 1997 GAMMA Sports - All Rights Reserved 6002 ES OWNER'S MANUAL TABLE OF CONTENTS INSIDE FRONT COVER... WARRANTY PAGE 1... FEATURES

More information

No. 412, 414, 416 Operations Manual

No. 412, 414, 416 Operations Manual No. 412, 414, 416 Operations Manual CARE: Occasional oiling of moving parts with machine oil will ease operation and extend the life of the brake. Occasionally check and tighten the lower beam bracket

More information

Installing the Hughes BGAN Remote Antenna

Installing the Hughes BGAN Remote Antenna Installing the Hughes BGAN Remote Antenna Product description BGAN Remote Antenna The Hughes BGAN Remote Antenna (HNS Part No. 9501286-0001) is designed to be permanently installed with the Basic Fixed

More information

HAND CRIMP TOOL Specification Sheet Order No

HAND CRIMP TOOL Specification Sheet Order No HAND CRIMP TOOL Specification Sheet Order No. 63819-1200 FEATURES TYPE 4D ΠA full cycle ratcheting hand tool ensures complete crimps ΠErgonomic soft grip handles for comfortable crimping ΠA precision

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS TM X-10 Type 1F HIGH SECURITY ELECTRONIC LOCK Table of Contents Introduction... 1 Basic Tools and Materials Needed... 1 Lock Parts for Installation... 1 Installation Kit Contents...

More information

HAND CRIMP TOOL SPECIFICATION SHEET Order No

HAND CRIMP TOOL SPECIFICATION SHEET Order No HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-5000 FEATURES ΠA full cycle ratcheting hand tool ensures complete crimps ΠErgonomic soft grip handles for comfortable crimping ΠA precision user-friendly

More information

Basic steps to time the Gammill quilting machine s rotary sewing hook

Basic steps to time the Gammill quilting machine s rotary sewing hook Basic steps to time the Gammill quilting machine s rotary sewing hook 1.) Turn the machine off and unplug it. 2.) With the needle bar in the raised position, remove the bobbin and bobbin case. 3.) Remove

More information

MSR/MSB Mechanical Setting Tool

MSR/MSB Mechanical Setting Tool Tech Unit No: 0620000004 Revision: C Approved By: Quality Engineer Date: 201-1-9 MSR/MSB Mechanical Setting Tool FEATURES: Special designed Bow Spring provides positive control and allows one size Mechanical

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet Modular Crimp Head Order No. 63819-4670 FEATURES Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63819-4600 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically

More information

OWNER'S MANUAL Issue 2 - December 14, 2000

OWNER'S MANUAL Issue 2 - December 14, 2000 OWNER'S MANUAL AL Issue 2 - December 14, 2000 Copyright 2000 GAMMA Sports - All Rights Reserved Provided by www.gssalliance.com OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2...FEATURES PAGE

More information

MODEL 83 Pail Handler

MODEL 83 Pail Handler MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE

More information

General Wood Shop Notes

General Wood Shop Notes General Wood Shop Notes Restricted Materials No METAL or BONE of any kind on any machine or in the room o See additional restrictions individual machine All reclaimed and other than new lumber must be

More information

ROTARY HAMMER OWNER S MANUAL

ROTARY HAMMER OWNER S MANUAL ROTARY HAMMER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

HAND CRIMP TOOL Specification Sheet Order No

HAND CRIMP TOOL Specification Sheet Order No HAND CRIMP TOOL Specification Sheet Order No. 63811-8200 FEATURES TYPE 4D A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information

REPAIR INSTRUCTIONS. Cat. No Cat. No MILWAUKEE ELECTRIC TOOL CORPORATION. SDS Max Demolition Hammer. SDS Max Rotary Hammer

REPAIR INSTRUCTIONS. Cat. No Cat. No MILWAUKEE ELECTRIC TOOL CORPORATION. SDS Max Demolition Hammer. SDS Max Rotary Hammer Cat. No. 9-0 SDS Max Demolition Hammer Cat. No. -0 SDS Max Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 8-9-0 d 000 8-9-0 d Special Tools Require Forcing

More information