CALL: (09) PRADIS CLAMP ANZIO FLOOR MOUNT CHANNEL LUGANO FACE FIX CLAMP EUROANCHOR DISCS & SPACERS MILANO EUROPOSTS
|
|
|
- Ezra Howard
- 6 years ago
- Views:
Transcription
1 INDEX PRADIS CLAMP ANZIO FLOOR MOUNT CHANNEL LUGANO FACE FIX CLAMP MONACO FLOOR MOUNT CLAMP EUROANCHOR DISCS & SPACERS MILANO EUROPOSTS EUROBRACE & MINIPOSTS HANDRAILS & HANDRAIL BRACKETS BRACKETS & CLAMPS VIENNA HYDRAULIC HINGE & LATCH POOL GATE DOOR PIVOTS CABANA SLIDING BALUSTRADE BALCONY SCREEN B2 B3 B4 B5 B6 - B8 B9 B10 - B11 B12 - B18 B19 - B20 B21 - B22 B23 B24 - B25 CATALOGUE EFFECTIVE 1ST FEBRUARY 2017 B1
2 PRADIS PRADIS Face mounted clamp EZ1 Satin anodised aluminium Selected powdercoat, lead time applies Using a single fixing bolt PRADIS can be fixed to the following different substrate types; Concrete Steel Timber - lag screw and bolt through Supporting clamp can be anotec powder-coated with 10yr warranty PRADIS is designed to take Viridian toughened or Viridian toughened laminated safety glass Suitable for glass thickness from 12mm to 22.38mm (can be adapted to take other glass thicknesses - upon request) Suitable for; Balustrade - Residential Occupancies A, A (other) & C3 Balustrade - Commercial Occupancies C3, B, E, C1/C2 and D Balustrade - Commercial Occupancy C5, Specific design is required (Based on barrier loads from AS/NZS1170.1: 2002) Pool fencing and wind breaks Refer to our website for glass height limits and fixing requirements Glass Cut Out Detail 30mm diameter 60mm Bottom Edge of Glass B2
3 ANZIO ANZIO Residential and Commercial Floor Mount Channel ETB Mill finish Silver Pearl powdercoat Selected powdercoat, lead time applies 1.25m, 2.5m and 5m stock lengths Fixing kits available for the following different substrate types; Concrete Timber Supplied complete with clamping kits, fixing sets and cover plates Supplied with predrilled holes; 100mm in and 200mm ctc ANZIO glass clamp kits are placed every 400mm ctc and no more than 200mm in from the edge of the glass Base channel and cover plate is anotec powder-coated with 10yr warranty Suitable to be used with; Viridian 12mm, 15mm toughened safety glass or 13.5mm, 17.5mm toughened laminated safety glass Rated up to a very high wind zone 1.76 kpa or less Designed for; - Balustrade Residential Occupancies A & C3 - Balustrade Commercial Occupancies B, E, C3, C1/C2 & D (Based on barrier loads from AS/NZS1170.1) - Pool fencing - Wind breaks Refer to our website for technical data sheets and fixing requirements 112 mm 30 mm Glass clearance 11.5 mm 84.5 mm Bottom Edge of Glass Glass Cut Out Detail B3
4 LUGANO LUGANO Residential Face Fix Channel EFC Mill Silver Pearl powdercoat Selected powdercoat, lead time applies 1.2m, 2.4m and 4.8m stock lengths Fixing kits available for the following different substrate types; Concrete Steel Bolt through timber fix Lag screw timber fix Suitable for 12mm toughened and 13.5mm laminated glass Recommended installation tools available End, internal and external corner caps available No glass cut outs or holes required Supporting base channel is anotec powder-coated with 10yr warranty Suitable to be used with; Viridian 12mm toughened or 13.5mm toughened laminated safety glass Rated up to a very high wind zone 1.76 kpa or less Designed for; Balustrade - Residential Occupancies A & C3 Balustrade - Commercial Occupancy C3 (with the use of a interlinking rail) (Based on barrier loads from AS/NZS1170.1) Pool fencing protecting a fall of 1 metre or more Pool fencing Refer to our website for further details and fixing requirements Concrete fixing B4
5 MONACO MONACO Commercial Face Fix Clamp EGL Mill Silver Pearl powdercoat Selected powdercoat, lead time applies 1.2m, 2.4m and 4.8m stock lengths SETS available for the different fixing options: Concrete fix Steel fix Bolt through timber fix Suitable for 15mm and 19mm toughened and 17.5mm and 21.5mm laminated glass Recommended installation tools available End, internal and external corner caps available Glass cut-out required Supporting base channel is anotec powder-coated with 10yr warranty Rated up to a ULS wind pressure of 3.0 kpa or less Designed for; Balustrade - Residential Occupancies A & C3 Balustrade - Commercial Occupancies B, E, C1, C2, D & C3 (Based on barrier loads from AS/NZS1170.1) Pool fencing protecting a fall of 1 metre or more Pool fencing Refer to our website for further details and fixing requirements Glass notch B5 Concrete fixing
6 EUROANCHOR STEPPED DISCS EUBFSD50/51 Euroanchor 50mm stepped disc EUBFSD50 includes 25mm thick spacer / EUBFSD51 includes 10mm thick spacer Satin anodised Manufactured in 316 grade stainless steel Anodised to over 20 µm The substrate material can be concrete, steel or timber Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod) Glass fixing hole 26mm dia 25mm spacer can be threaded M10 or 10.5mm through hole (specify upon order) Fixing centres as per PS1 EUBFSQ Euroanchor 50mm square stepped disc Manufactured in 316 grade stainless steel The substrate material can be concrete, steel or timber Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod) Glass fixing hole 26mm dia Fixing centres as per PS1 EUBFCS Euroanchor 50mm countersunk stepped disc Manufactured in 316 grade stainless steel The substrate material can be concrete, steel or timber 10mm and 25mm spacers available Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod) Glass fixing hole 22mm dia 25mm spacer threaded M10 M10 x 35 countersunk hex bolt Fixing centres as per PS1 10 EUBFSQD Euroanchor rectangular stepped disc Manufactured in 316 grade stainless steel The substrate material can be concrete, steel or timber Double 25mm spacer 10.5mm through hole Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod) Glass fixing hole 26mm dia Fixing centres as per PS1 B6
7 EUROANCHOR STEPPED DISCS EUBFSD52 Euroanchor 50mm stepped disc with a 10mm thick stair stringer spacer EUBFSD53 Euroanchor 50mm stepped disc with a 25mm thick stair stringer spacer Manufactured in 316 grade stainless steel Centre hole of the spacer is threaded and countersunk to suit M10 countersunk hex bolt 3x countersunk fixing holes to suit 14G countersunk self tapping screw Includes washer, PVC sleeve & fixings; EUBFSD52 is supplied with 3x 14G x 50mm c/snk self tapping screws EUBFSD53 is supplied with 3x 14G x 60mm c/snk self tapping screws Glass fixing hole 26mm dia Designed for timber stringers Fixing centres as per PS1 Important Note: EUBFSD52 and EUBFSD53 Euroanchors are only suitable for residential occupancy A and internal stair barriers within detached dwellings and household units. 12 minimum glass thickness 25mm min 14g screw PCD33 M10 S.S 316 THREADED ROAD 30mm LONG EUBFSD52 Detail Minimum 40 Minimum penetration 10 Stepped crs maximum 12 minmum glass thickness 25mm min 14g screw PCD33 M10x40 C/SNK S.S 316 MACHINE SCREW EUBFSD53 Detail Minimum 40 Minimum penetration 25 Stepped crs maximum TIMBER FOR INTERNAL INSTALLATION ONLY B7
8 SPACERS & STEPPED DISCS SP5025T and SP5025 Spacers Satin anodised SP5025T - Threaded M10 hole SP mm dia. through hole 25 Ø50 STSP25 and STSP10 Stair stringer spacer Ø50 Centre hole is threaded and countersunk, to suit M10 countersunk hex bolt 3x countersunk fixing holes to suit 14G countersunk screws STSP25 = 25mm thick spacer, STSP10 = 10mm thick spacer Fixings sold separately Important Note: STSP spacers can only be used for residential occupancy A and internal stair barriers within detached dwellings and household units. SPC5010 Countersunk disc or Spacer Drilled and countersunk To suit M10 countersunk hex bolt SD50M10 Stepped disc Satin anodised M10 threaded blind hole Ø50 10 Ø50 12 SP505WB Weatherboard shim Satin anodised 8 degree angle 12mm thick tapered to 5mm 10.5mm dia. through hole SPG3210/12 Gib spacers Plastic Aluminium 10mm thick plastic or aluminum 12mm thick plastic or aluminium Ø32 Ø50 10 or 12 B8
9 MILANO EUROPOST RESIDENTIAL MILANO POST Semi-Frameless Residential Balustrade Posts ERP Silver Pearl powdercoat Selected powdercoat Based on design loads from AS/NZS and a max uls wind pressure of 1.76 kpa (very high wind zone) Rated for Residential occupancy A and C3 Suited for Viridian Balustrade mm toughened safety glass or 11.5mm toughened laminate glass Fixed at 1650mm centres Maximum height 1100mm Maximum glass overhang 500mm Refer to our website for further details 500mm max. 500mm max. MILANO POST Semi-Frameless Commercial Balustrade Posts Silver Pearl powdercoat Selected powdercoat 500mm max. TCan be used in any commercial occupancy Concrete or bolt through timber Refer to our website for further details 500mm max. B9
10 EUROBRACE POSTS EB1 Eurobrace Manufactured in 316 grade stainless steel Suitable for 10, 12 and 15mm glass Posts are set into concrete (Ø50mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer s specifications) 26mm diameter holes in glass 45mm typical clearance from ground surface Distance from inside face of glass and post centre is 40mm Refer our website for further details Ø Glass Cut Out Detail EB2 Eurobrace, square 44 Manufactured in 316 grade stainless steel Suitable for 10, 12 and 15mm glass Posts are set into concrete (Ø50mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer s specifications) 26mm diameter holes in glass 45mm typical clearance from ground surface Distance from inside face of glass and post centre is 32mm Refer our website for further details Ø Glass Cut Out Detail B10
11 MINI POSTS FMP250 Miniposts Manufactured in 316 grade stainless steel Suitable for 12 and 15mm glass Mini posts are set 85mm into concrete (Ø60mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer s specifications) 26mm diameter hole in glass 45mm typical clearance from ground surface Optional Dress Ring or Cover Plate available Refer our website for further details Ø50 Ø26 FMP250RING 80mm outside dia. 51mm inside dia Glass Cut Out Detail FMP250COVER 125mm outside dia. 51mm inside dia. (matches FMP350 cover) FMP350 Miniposts Manufactured in 316 grade stainless steel Suitable for 12 and 15mm glass 26mm diameter hole in glass 45mm typical clearance from ground surface Posts can be fastened to concrete or wooden surfaces using 2 x M10 bolts/screws Refer our website for further details Ø125 Ø90 PCD 4 holes Ø Glass Cut Out Detail B11
12 HANDRAILS HRC1 Roundline Interlinking Handrail 2205 Duplex Stainless Steel Interlinking Handrail Capping, lead time applies 5.8m stock lengths Glass width limits can be found on page B14 Easy to install using simple tools, no on site welding required Roundline is easily attached to the glass using a compression fit rubber molding Suitable for 12mm, 15mm and 19mm toughened safety glass and 13.5mm and 17.5mm toughened laminated safety glass Joiners, end caps and wall mount brackets are glued together using tube lock Joiners need be located between the glass panes Wall mount bracket requires a EPDM washer when penetrating cladding, weatherboards and membrane surfaces EPDM washers are sold separately (lead time applies) 42 dia Range of components; HRC1SJ Straight Joiner HRC1EC End Cap HRC1WA Wall Anchor HRC1C90 Cast 90deg Corner HRC1VAJ Vertical Adjustable Joiner HRC1HAJ Horizontal Adjustable Joiner B12
13 HANDRAILS HRC2 Squareline Interlinking Handrail 2205 Duplex Stainless Steel Interlinking Handrail Capping 30, lead time applies 5.8m stock lengths Glass width limits can be found on page B14 Easy to install using simple tools, no on site welding required Squareline is easily attached to the glass using a compression fit rubber molding Suitable for 12mm, 15mm and 19mm toughened safety glass and 13.5mm and 17.5mm toughened laminated safety glass Joiners, end caps and wall mount brackets are glued together using tube lock Joiners need be located between the glass panes Wall mount bracket requires a EPDM washer when penetrating cladding, weatherboards and membrane surfaces EPDM washers are sold separately (lead time applies) 40 Range of components; HRC2SJ Straight Joiner HRC2EC End Cap HRC2WA Wall Anchor HRC2C90 Cast 90deg Corner HRC2VAJ Vertical Adjustable Joiner HRC2HAJ Horizontal Adjustable Joiner B13
14 HANDRAILS HRC1 Roundline Interlinking Handrail HRC2 Squareline Interlinking Handrail - GLASS WIDTH LIMITS HRC1 Roundline Interlinking Handrail Occupancy type A other and C3; Maximum glass width 2200mm Occupancy type C1/C2 & D; Maximum glass width 1400mm Occupancy type C5; Specific design is required HRC2 Squareline Interlinking Handrail Occupancy type A other and C3; Maximum glass width 2100mm Occupancy type C1/C2 & D; Maximum glass width 1400mm Occupancy type C5; Specific design is required Notes; 1) These interlinking rails are designed to resist SLS design loads in the event of a single pane of glass breaking 2) Interlinking rail must be supported by each pane, structural post or other building element 3) Interlinking rail must be mechanically connected using joiners or welded together 4) Joiners or welds need be located between the glass panes 5) In the unlikely event of a glass pane breaking, the deflection of this interlinking rail under SLS design loads is restricted to span / 60 6) Specific design is required for occupancy type C5 B14
15 HANDRAILS HRC3 Archline Aluminium Interlinking Handrail Capping Mill Silver Pearl powdercoat Selected powdercoat, lead time applies 35 5m stock lengths Glass width limits can be found on page B16 Easy to install using simple tools, no on site welding required Suitable for 12mm and 15mm toughened safety glass and 13.5mm and 17.5mm toughened laminated safety glass Interlinking capping is anotec powdercoated with a 10yr warranty Joiners, end caps and wall mount brackets are supplied complete with screws HRC3WM - wall mount bracket requires a EPDM washer when penetrating cladding, weatherboards and membrane surfaces. HRC3EPDM sold separately Range of components; HRC3J90 HRC3EC HRC3WM HRC3SJ Joiner Installation Details HRC3SJ Straight Joiner Connection Detail HRC3WM Wall Mount Bracket Connection Detail HRC3J90 90deg Joiner Connection Detail B15
16 HANDRAILS HRC3 Archline Aluminium Interlinking Handrail Capping Glass Mounting Detail Medium density single Glass Width Limits Occupancy type A other and C3; Maximum glass width 1850mm Occupancy type C1/C2 & D; Maximum glass width 1000mm Occupancy type C5; Specific design is required Notes; 1) This interlinking rail is designed to resist SLS design loads in the event of a single pane of glass breaking 2) Interlinking rail must be supported by each pane, structural post or other building element 3) Interlinking rail must be mechanically connected using joiners or welded together 4) Joiners or welds need be located between the glass panes 5) In the unlikely event of a glass pane breaking, the deflection of this interlinking rail under SLS design loads is restricted to span / 60 6) Specific design is required for occupancy type C5 B16
17 HANDRAILS BH1 Slimline handrail & end cap Mill finish Silver Pearl powdercoat Selected powdercoat (lead time applies) Meets AS for handrailing for glass balustrades that are over 1m in height and only fixed to the base Complies with NZS4203:1992 for handrails Suitable for 10mm and 12mm glass (specify when ordering) Can be used for both interior and exterior applications Designed for easy fitting, clips directly over the glass: no welding required and can be installed after glass is fitted BH2 End Cap 22mm 30mm EUHB50 Handrail bracket 26mmØ hole in glass for EUHB50 Supplied 150mm high for on-site trimming EUHB50SQ Handrail bracket, square 26mmØ hole in glass Supplied 150mm high for on-site trimming EUHBTF50 Handrail bracket timber fix Designed for timber fixing Supplied 150mm high for on-site trimming EUHBTF50SQ Handrail bracket timber fix, square Designed for timber fixing Supplied 150mm high for on-site trimming B17
18 HANDRAILS HBGM1 Round glass mounted handrail bracket Custom finishes available upon request 75 M8 Made from 2205 Duplex stainless steel Can be used with balustrades that require a load supporting interlinking rail 26mmØ hole in glass 50dia 16dia R25 75 HBGM2 Square glass mounted handrail bracket Custom finishes available upon request Made from 2205 Duplex stainless steel Can be used with balustrades that require a load supporting interlinking rail 26mmØ hole in glass 50dia 16dia R25 75 HBWM1 Round wall mounted handrail bracket Custom finishes available upon request M8 75 Made from 2205 Duplex stainless steel Can be used with balustrades that require a load supporting interlinking rail Mounted to the wall using 3x countersunk screws (screws not included) 50mdia 16dia R25 75 HBWM2 Square wall mounted handrail bracket M8 Custom finishes available upon request 16dia R25 75 Made from 2205 Duplex stainless steel Can be used with balustrades that require a load supporting interlinking rail Mounted to the wall using 3x countersunk screws (screws not included) 50mdia 75 HBFS Handrail bracket fixing straddle Custom finishes available upon request Made from 2205 Duplex stainless steel Designed for mounting handrail sections to the handrail bracket Supplied with M8 screw for fixing to the handrail bracket Handrail section fixing screws are not included B18
19 BRACKETS & CLAMPS BCI/BCWM/BC90/BC135 Balustrade clamps Polished stainless Satin stainless Suitable for 12mm glass 316 grade stainless steel Supplied with rubber gasket inserts typical height BCI Glass-to-Glass BCWM Wall Mount BC90 90 Corner BB70/BB70SQ Balustrade brackets, wall mount Polished stainless Satin stainless Suitable for 10 and 12mm glass 316 grade stainless steel Round and square options 18 BB70 BB70SQ BBD70/BBD70SQ Balustrade brackets, glass/glass Polished stainless Satin stainless Suitable for 10 and 12mm glass 316 grade stainless steel Round and square options Ø18 hole in glass 45 BBD70 BBD70SQ B19
20 CLAMPS BCRD6/10, BCFD6/10, BCRS8/10, BCFS8/10 Glass clamps, post or wall mount Polished stainless Satin stainless Options for 6, 8, 10 and 12mm glass 316 grade stainless steel Round and square profiles Flat back for fixing to square section and wall mounting, or round back to suit 50mm tubular post BCRD6 Round back 6-8mm glass BCFD6 Flat back 6-8mm glass 6-8mm Glass mm Glass mm Glass mm Glass BCRS8 Round back 8-10mm glass BCFS8 Flat back 8-10mm glass BCRD10 Round back 10-12mm glass BCFD10 Flat back 10-12mm glass mm Glass mm Glass BCRS10 Round back 10-12mm glass BCFS10 Flat back 10-12mm glass mm Glass mm Glass B20
21 VIENNA HYDRAULIC HINGES EH1NHO Glass to wall hydraulic hinge, marine grade Made from aluminium and stainless steel Hinge opening angle 100 Self-closing from any angle Available as non-hold open (for pool environments) and hold open (doors) Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattle Maximum recommended glass weight: 70kg Maximum recommended door width: 900mm Standard for 12mm glass, can be supplied for 10mm or 15mm glass on request Screw on each pivot block adjusts hydraulic closing speed EH1LNHO Glass to wall hydraulic hinge, offset, marine grade Made from aluminium and stainless steel Hinge opening angle 100 Self-closing from any angle Available as non-hold open (for pool environments) and hold open (doors) Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattle Maximum recommended glass weight: 70kg Maximum recommended door width: 900mm Standard for 12mm glass, can be supplied for 10mm or 15mm glass on request Screw on each pivot block adjusts hydraulic closing speed EH2NHO Glass to glass hydraulic hinge, marine grade 316 Glass cut-out detail 50 Made from aluminium and stainless steel Hinge opening angle 100 Self-closing from any angle Available as non-hold open (for pool environments) and hold open (doors) Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattle Maximum recommended glass weight; 70kg Maximum recommended door width; 900mm Standard for 12mm glass, can be supplied for 10mm or 15mm glass on request Screw on each pivot block adjusts hydraulic closing speed R 5 R 13 6 B21
22 VIENNA POOL GATE LATCHES (Profile & finish to complement hydraulic hinge) EHPL1 Gate latch and strike 33, marine grade mm Designed for a frameless glass pool gate that closes to a post or wall Single action, self-latching magnetic operation Manufactured in aluminium and stainless steel Standard for 12mm glass, can be supplied for 10mm or 15mm glass on request 100mm 66 ø16 Gate Panel 150 min Return/Post EHPL1RP Round Post Gate latch and strike, marine grade mm 8 Glass Preparation 33 Designed for a frameless glass pool gate 50mm dia. post mount Single action, self-latching magnetic operation Manufactured in aluminium and stainless steel Standard for 12mm glass, can be supplied for 10mm or 15mm glass on request 100mm 66 ø16 Gate Panel 150 min Return/Post Made to order only 5 Glass Preparation EHPL2 Gate latch and keeper 33 33, marine grade mm Designed for a frameless glass pool gate and side panel Single action, self-latching magnetic operation Manufactured in aluminium and stainless steel Standard for 12mm glass, can be supplied for 10mm or 15mm glass on request 100mm 66 ø16 Ø12 Gate Panel ø16 Ø min 5 Glass Preparation EHPL290 Gate latch and keeper 50mm, marine grade mm ø16 Designed for a frameless glass pool gate that closes to a side panel at 90 Single action, self-latching magnetic operation100mm Manufactured in aluminium and stainless steel Standard for 12mm glass, can be supplied for 10mm or 15mm glass on request Top View 66 Side View Glass Preparation 38mm B22
23 BALUSTRADE & POOL: PIVOTS FPF790 Europool top pivot arm 90 91mm 106mm 167mm Designed for mounting a glass gate to a glass balustrade Used in conjunction with HPT20/HPT10 top patch fittings that allows them to work as a top pivot set Frameless glass mounting Manufactured in 316 stainless steel FPF790L left hand 91mm 30mm 167mm 106mm ASSSEMBLY (rh) 30mm FPF790R right hand RETURN PANEL DOOR HPT20PG Top fitting to suit pool gate pivots R Top patch fitting suitable for Euroglass pool gate fittings: FPF5/FPF6/FPF7 and FPF790/FPF8 Adjustable pivot insert Features concealing cover plates 52mm 31mm 166mm B23
24 SLIDING DOOR SYSTEMS: CABANA CABANA SLIDING BALUSTRADE BALCONY SCREEN CABANA is the overall solution for balcony glazing. The CABANA system is a practical solution for protection against wind and rain. CABANA creates the perfect out door living environment on your balcony so you can enjoy the outdoors all year round. FEATURES A simple dual purpose system that provides protection from falling and shelter from the weather. Quick and easy installation. Cylinder push locks ensure additional protection. Can be used with multiple sliding doors for wide openings. Additional visual effects can be achieved by using Frosted, Coloured or DigiPrinted glass. Small gaps between sliding glass panels can be filled with no obtrusive seals. TECHNICAL DETAIL Designed to take the following glass thicknesses; - Balustrade infill panels; 12mm to 17.5mm - Sliding door panels; 10mm to 13.5mm Each sliding door can take a weight up to 100kgs CABANA sliding door system and balustrade infill panels are attached to a floor mounted structural steel frame. FINISHES Natural satin anodised aluminium Custom powder coat colour APPLICATIONS - Out door living environments - Residential & Commercial use - For use on balconies that require shelter from the weather and protection from falling. B24
25 SLIDING DOOR SYSTEMS: CABANA CABANA SLIDING BALUSTRADE BALCONY SCREEN Door Configurationn 3 Doors Wide Doors can be handed left or right 6 Doors Wide Doors can be handed left or right B25
Beautiful balustrades DESIGNER FRAMELESS GLASS BALUSTRADES & POOL FENCES
Beautiful balustrades DESIGNER FRAMELESS GLASS BALUSTRADES & POOL FENCES CUBOID FACE-FIXED BALUSTRADE A discreet and invisibly fixed system for attaching glass balustrades and pool fencing without disturbing
DIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE
DIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE SAFE STYLISH AND AFFORDABLE FOR DIY GLASS FENCE SOLUTIONS THE CHOICE IS SIMPLE Bring your outdoor areas to life with clear views and clean lines.
Glass Fittings. G l a s s F i t t i n g s. G l a s s F i t t i n g s. Contents
Glass Fittings Contents Shower Hinges - Premier Range Shower Hinges - Elite Range Bifold Hinges Shower Handles / Pulls Shower Extrusions / Seals Shower Brackets Glass Shelves, Brackets Glass Anchors /
EDGETEC FRAMELESS GLASS BALUSTRADE AND POOL FENCING SYSTEMS
EDGETEC FRAMELESS GLASS BALUSTRADE AND POOL FENCING SYSTEMS www.homeplus.co.nz EDGETEC MINI POST 12mm Toughened Glass Designed and Assembled in New Zealand Available in Wide Range of Dulux Powder Coat
Glass and Stainless Solutions
Glass and Stainless Solutions Highgrove Glass and Stainless Solutions Glass Balustrading Stainless Steel Balustrading Glass Shower Screens Mirrors Glass Splashbacks Glass Fencing Stainless Steel Fencing
INDEX. 5 Lady Fisher Place, Highbrook, Auckland PO Box Botany Auckland P F W
SECTION 5: INDEX Product Page Infinity BA124 Face Fix Balustrade 5.1-5.4 Infinity BA122 Base Fix Balustrade (Product details pending) 5.5-5.8 PosiGlaze Balustrade System, Components and Fixings 5.9-5.14
EDGETEC FRAMELESS GLASS BALUSTRADE AND POOL FENCING SYSTEMS
EDGETEC FRAMELESS GLASS BALUSTRADE AND POOL FENCING SYSTEMS WWW.JURALCOBALUSTRADES.CO.NZ EDGETEC MINI POST 12mm Toughened Glass Designed and Assembled in New Zealand Available in Wide Range of Dulux Powder
SPECIFICATION SHEETS. FRAMELESS GLASS pool fencing
SPECIFICATION SHEETS FRAMELESS GLASS pool fencing 8-10mm 12mm STANDARDS & NATA TESTING 1254mm 1200mm * GLASS POOL FENCING MAXIMUM SPAN 2000MM 12MM TOUGHENED SAFETY GLASS 1200MM HIGH FULLY AS/NZ-2208 CERTIFIED
TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
Frameless Glass Balustrade Systems
Frameless Glass Balustrade Systems Frameless Glass Balustrade Systems i fg1 - systems Spigot Fixed Glass with Toprail OPTIONS B Toprail & Accessories A Glass Panel C Spigot Posts i fg2 - systems Spigot
Stainless SHS stanchions with glass infill and offset handrail
Stainless SHS stanchions with glass infill and offset handrail design elements C4 Min 180 100 40 Min 1000mm 100 100 Stainless SHS stanchions with glass infill and offset handrail C4 design Stainless steel
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
Aluminum Railing Installation. Glass Railing Spindle Railings Intimacy Railings and Panels
Aluminum Railing Installation Glass Railing Spindle Railings Intimacy Railings and Panels This information in this manual will help you to Better understand our product line. Give you guidelines for an
SPECIFICATION SHEETS SOFTERCLOS HINGE FOR. FRAMELESS GLASS pool fencing
SPECIFICATION SHEETS SOFTERCLOS HINGE FOR FRAMELESS GLASS pool fencing 8-10mm mm 8 OR 12MM STANDARD GLASS GATE 12MM STANDARD HINGE PANEL AS2208 Heat Soaked & Toughened Glass AS1926.1 Pool Safety Standards
186, Penrose, Auckland, New Zealand. PO Box 112
5.0 Index 5.1 Elite Pool Gate Latches 5.2 Elite Pool Gate Pivot Arms 5.3 Elite Pool Gate Components 5.4 Slimline Pool Gate Latches 5.5 Slimline Pool Gate Hinges 5.6 Budget Pool Gate Kits 5.7 Nautech Strut
ATLANTIS RAIL Contact Information
ATLANTIS RAIL Contact Information Customer Service (800) 541-6829 (508) 732-9191 Spectrum System Installation Instructions Atlantis Rail s Spectrum System is an easy to install, universal cable railing
TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
Open Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
aluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
Shetland Stalls Installation Instructions
Shetland Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 1/9/18 Before you start Kit can accommodate up to 12 wide stall front
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
SPECIFICATION SHEETS. POLARIS FRAMELESS GLASS pool fencing
SPECIFICATION SHEETS POLARIS FRAMELESS GLASS pool fencing 8-mm 5mm AS2208 Heat Soaked & Toughened Glass 1254mm 1200mm 12MM 1200MM HIGH STANDARD PANEL * GLASS POOL FENCING MAXIMUM SPAN 1600MM 12MM 1200MM
ATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 10/13/2016 Issued: 12/17/2014 Visit www.ati-es.com for current status Revised: 06/05/2015 Page 1 of
INDEX SECTION 5: FRAMELESS BALUSTRADE SYSTEMS
SECTION 5: INDEX Product Page Infinity BA124 Face Fix Balustrade 5.1-5.4 Infinity BA122 Base Fix Balustrade (Product details pending) 5.5-5.8 PosiGlaze Balustrade System, Components and Fixings 5.9-5.14
GEZE SLIDING DOOR SYSTEMS
GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and
RAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES
RAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES THE SYSTEM The system that can even be without any load-bearing handrail... * With general technical approval (AbP) and certified type structural properties!
Merlin / Prima. Patch Fittings. Patch Fittings. Merlin & Prima Series
/ Prima Patch Fittings & Prima Series / Prima In the field of architectural fittings for glass doors, provides high quality and total design flexibility for ease of installation, safety, security and functionality.
SLIDING DOORS DIRECT ROLLER
SLIDING DOORS Single door fixed to wall NFK s Direct Sliding Door system, for installation to a solid wall. Height adjustable track supports can be quickly mounted to a wall allowing the glass to pass
Our Offer for Balustrades
Our Offer for Balustrades This offer contains proposals of balustrades taken from our real life realizations and has been created to facilitate selection process as an addition to our offer presented in
STAINLESS STEEL BALUSTRADE SYSTEMS
STAINLESS STEEL BALUSTRAE SYSTEMS PARTS CATALOGUE ALUMINIUM SOPFRONT MANUFACTURERS MIRROR WARROBES ARWOO AN OAK OORS PICTURE FRAMING MIRRORS PAINTE SPLASBACKS GLASS BALUSTRAES ECORATIVE GLASS 30 Tobago
2015 Feeney (8/15) # D. Aluminum Railing Systems
2015 Feeney (8/15) #2012-425D Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the
Universal ARCOS EA. Patch Fittings
Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings
INSTALLATION INSTRUCTIONS
Tools required for the installation. A. Core Drill 87mm Drill bit B. Tape measure C. Spirit Level D. Marking pen E. Caulking gun F. Cutting Pliers G. Cordless Drill and Philips head bit, 5mm Drill bit.
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
Oxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
Pro-Railing is a stylish, durable and cost effective stainless steel handrailing component system designed with ease of installation in mind.
PRO-RAILING THE STAINLESS STEEL HANDRAIL COMPONENT SYSTEM Pro-Railing is a stylish, durable and cost effective stainless steel handrailing component system designed with ease of installation in mind. The
The following instructions will guide you through the installation of your new vinyl railing.
Installation Guide St. James Vinyl T-Rail Tools Required Protective eye glasses 3/8 x 3 Concrete Anchors/Fasteners (for Tape measure concrete installations) Variable speed drill/screwdriver Philips Driver
33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device
911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device
SLOANE ACCESSORIES PTY LTD
SLOANE ACCESSORIES PTY LTD FRAMELESS GLASS FENCING & BALUSTRADE STAINLESS STEEL FITTINGS 88 STONEY CREEK ROAD, BEXLEY NSW 2207 TEL: 1300 138 344 EMAIL: SALES@SLOANEACCESSORIES.COM.AU WWW.SLOANEACCESSORIES.COM.AU
INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
2013 Feeney (2/14) # B. Aluminum Railing Systems
2013 Feeney (2/14) #2012-425B Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the
Heavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
INDEX SECTION 3: COMMERCIAL HARDWARE
SECTION 3: COMMERCIAL HARDWARE INDEX Product Page Patch Fittings 3.1-3.2 Patch Components 3.3 Architectural Door Pivots 3.4 Door Rails and Components 3.5 Ozone Self Closing Hydraulic Patch 3.6-3.7 Ozone
Balustrading. Pool Fencing. Splashbacks. Mirrors. Showers. Privacy Screening. Custom Fabrication. Domestic or Commercial
Balustrading Pool Fencing Splashbacks Mirrors Showers Privacy Screening Custom Fabrication Domestic or Commercial BALUSTRADING Frameless A modern glass balustrade giving a seamless designer appearance
INSTALLATION INSTRUCTIONS
Tools required for the installation. A. Core Drill 87mm Drill bit B. Tape measure C. Spirit Level D. Marking pen E. Caulking gun F. Cutting Pliers G. Cordless Drill and Philips head bit, 5mm Drill bit.
The following instructions will guide you through the installation of your new vinyl railing stair kit.
Installation Guide Vinyl Standard Stair Railing Tools Required Protective eye glasses Tape measure Variable speed drill/screwdriver Rotary hammer or hammer drill and masonry percussion bit recommended
WPS crew Doors Installation instructions
WPS-132-133 crew Doors Installation instructions ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A CREW WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater 2. Rear Thresholds - Right Hand & Left
33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device
*911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
WIRE BALUSTRADE SYSTEMS Edition 1
WIRE BALUSTRADE SYSTEMS Edition 1 2 Stainless Wire Cable hammersmith.com.au 1 x 19 316 grade stainless steel suitable for both interior and exterior application. Rigid, non flexible, minimum stretch. Higher
BalConIEs.
BalConIEs Installation guidelines for balustrade cladding The following regulations and provisions must be observed when preparing and installing balustrade cladding using Trespa Meteon sheets: 防 The applicable
. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R Index Legal Disclaimer 4 Profile Identification 5-7 Hardware Identification 8
. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R VISTAFOLD SYSTEM PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: June 2013 . crealco V I S TA F O L D B O T
SLIDING GATES BRUNDLE
SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour
PRODUCT CATALOGUE 2018 A WORLD CLASS,MULTI PURPOSE BALUSTRDE KIT SYSTEM
PRODUCT CATALOGUE 2018 A WORLD CLASS,MULTI PURPOSE BALUSTRDE KIT SYSTEM Place Your Order, Follow Easy Step By Step STEP 1 Measure and make a rough sketch showing layout. Factory Step 2 Choose your design
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
Assembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
Weatherfold 4s 50 & Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium
- Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium This Guide to Quantities is only applicable to Data Sheets E1 and E130. Specification for Individual Panels Track
SECTION 19: Endwood Fusion Welded Gate Installation Guide
SECTION 19: Endwood Fusion Welded Gate Installation Guide ASSEMBLY AND INSTALLATION FOR: Fusion Welded Gates Gate Frame with Full Size Pickets Privacy & Board on Board California & Shadowbox Gate width
Clamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
SECTION FOLDING GLASS PANEL PARTITIONS
SECTION 10 22 26.35 FOLDING GLASS PANEL PARTITIONS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY, MOUNTING BRACKETS, MOUNTING
Interior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
CoFold Non-Mortice. Fitting Instructions for top hung exterior folding doors SYSTEM CAPACITY. Diagram 1. Diagram 2. Diagram 3.
1 CoFold Non-Mortice Fitting Instructions for top hung exterior folding doors Diagram 1 SYSTEM CAPACITY Maximum leaf height Maximum leaf weight Maximum leaf width Maximum leaf thickness - 3300mm - 100kg
Auxiliary Hardware Brass Padlocks
Brass Padlocks Gainsborough offer a selection of quality 45mm and 50mm brass padlocks, featuring brass and steel materials and 6 pin cylinder security. The range includes hardened steel or brass shackles
3. Use base plate as template (see FIG. 4-1) to mark location for fasteners.
Plan the layout of the railing it is the beginning of a successful project. Getting Started... 1. Completely read the application instructions before starting the installation of the railing. 2. Properly
DESIGN. DELIVER. DONE. RAILING + FLOATING STAIRS
DESIGN. DELIVER. DONE. RAILING + FLOATING STAIRS Modern strength has never been so simple. Floating stairs have always been a fab-on-site nightmare...until now. Viewrail Flight unites rock solid construction
Good Neighbour INSTALLATION GUIDE GOOD NEIGHBOUR FENCING BEFORE YOU START TOOLS AND HARDWARE REQUIRED
INSTALLATION GUIDE Good Neighbour GOOD NEIGHBOUR FENCING Stratco Good Neighbour fencing is both strong and attractive. Its design allows clean and uncluttered lines to be enjoyed by neighbours on both
Installation Instructions for. Handrail Component System
Handrail STEP-BY-STEP Installation Instructions for Handrail Component System Rise in Inches Run in Inches 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 8.5 47 45 43 42 40 39 38 36 35 34 33 32
CXT PRO RAILING INSTALLATION INSTRUCTIONS For Installations Using Aluminum and Glass Balusters Sold Separately
CXT PRO RAILING INSTALLATION INSTRUCTIONS For Installations Using Aluminum and Glass Balusters Sold Separately CCRR-0171 PFS AA-652 Drill/power screwdriver Assorted drill bits Hammer Miter or circular
Drake & Wrigley s extensive range of architectural hardware is produced entirely in commercial grade nonferrous metals, primarily solid brass, zinc and stainless steel. A wide choice of colours can also
Privacy Wall & Glass Selections Pivot-Hinged Door (For products manufactured after September 14, 2009)
Privacy Wall & Glass Selections Pivot-Hinged Door (For products manufactured after September 14, 2009) 3/16" HEX BIT #2 ACR BIT 3/8" HEX SOCKET Full-Height (No Switch) Transom (No Switch) Full-Height (With
GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
Hardware Fitting Accessories Door Seals
Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following
GOOD NEIGHBOUR FENCING INSTALLATION GUIDE GOOD NEIGHBOUR FENCING BEFORE YOU START TOOLS AND HARDWARE REQUIRED
GOOD NEIGHBOUR FENCING Stratco Good Neighbour fencing is both strong and attractive. Its design allows clean and uncluttered lines to be enjoyed by neighbours on both sides of the fence. Good Neighbour
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS GLI POOL PRODUCTS / 1100 PERFORMANCE PLACE / YOUNGSTOWN, OH 44502 PH. 800-448-2343 FAX 330-744-1228 www.glipoolproducts.com WARNING THERE IS NO SUBSTITUTE FOR COMPETENT ADULT
Fold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE
Fold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE This instruction guide provides the minimum recommended procedures to correctly prepare the rough opening, install a fold-a-way patio door unit and apply
ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
Adjustment Has adjustment strike block screw for sealing action adjustment.
RP8 Si A concealed, acoustic automatic door bottom silicon seal for medium temperature smoke and fire door applications. RP8Si is spring loaded to lift clear off the floor as soon as the door leaf is opened
western window systems westernwindowsystems.com installation instructions non-pocket 2-1/4 panels
series 2600 multi-slide non-pocket 2-1/4 panels windowsystems.com windowsystems.com movement, which can cause warping and other problems. Frame kit components: Each door will have a head assembly, a threshold
Q-RAILING SYSTEMS THE IDEAL SOLUTION FOR EVERY PROJECT THE PREMIUM BRAND IN RAILING SYSTEMS
Q-RAILING SYSTEMS THE IDEAL SOLUTION FOR EVERY PROJECT THE PREMIUM BRAND IN RAILING SYSTEMS BRING YOUR VISION TO LIFE WELCOME TO Q-RAILING, YOUR SOURCE FOR INNOVATIVE, HIGH GRADE, DESIGNER RAILING SYSTEMS.
SPECIFICATION SHEETS. POLARIS FRAMELESS GLASS pool fencing
SPECIFICATION SHEETS POLARIS FRAMELESS GLASS pool fencing 8-10mm 5mm 1254mm 1200mm 12MM 1200MM HIGH STANDARD PANEL * GLASS POOL FENCING MAXIMUM SPAN 1600MM 12MM 1200MM HIGH GATE PANEL 12MM 1200MM HIGH
HOW TO INSTALL HORIZONTAL ROD RAILING TREX SIGNATURE STANDARD
HOW TO INSTALL HORIZONTAL ROD RAILING NOTES:» Adjust drill power to lowest setting that will drive screw. DO NOT OVER TORQUE 6 STAINLESS STEEL STAINLESS FASTENERS.» NEVER use impact tools on 6 Stainless
Privacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
ATI Evaluation Service A Division of Architectural Testing Certification Services Code Compliance Research Report
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 04/15/2016 Issued: 06/24/2014 Visit www.ati-es.com for current Revised: 09/24/2014 Page 1 of 21 Maine
Aurora Door Concepts Practicality in Design
Aurora Door Concepts Practicality in Design Aurora Door Concepts This collection of commercial doors and related accessories has been designed to enhance our partition suites. The range has evolved due
Assembly Instructions 10 X 10 Aluminum Frame Building
Assembly Instructions 10 X 10 Aluminum Frame Building 27 97 9 8 47 36 74 52 10 10 X 10 Square Building W/ Dome Includes: The Steel Entry Door with a Dead Bolt Lock assembly and Aluminum Door Frame. Metal
ALUMINUM. Fence Systems. Made. in the USA
Aluminum Fence Systems Gates and Hardware Made in the USA ALUMINUM M Fence Systems Lifetime Warranty KeyLinkFencing.com Table of Contents Gates and Hardware 3 Morgan Accessories 3 4000 Series 4 & 5 2000
TREX SIGNATURE (FORMERLY REVEAL) RAILING Installation Instructions
TREX SIGNATURE (FORMERLY REVEAL) RAILING Installation Instructions NOTES:» SIGNATURE POSTS CANNOT BE USED WITH SIGNATURE TRADITIONAL OR SIGNATURE COCKTAIL DESIGNS, ONLY PRESSURE TREATED POSTS/ POST SLEEVES
PRE-ENGINEERED HORSE STALL SYSTEMS SDFD SLIDING DOOR c/w FOLD-DOWN GRILL. & Assembly. Installation Instructions
PRE-ENGINEERED HORSE STALL SYSTEMS 4800 SDFD SLIDING DOOR c/w FOLD-DOWN GRILL & Assembly Installation Instructions 4800 SDFD Sliding Door c/w Fold-Down Grill Components - 1 3 /4" x 2" x 88" channels (2)
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
Toilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
Organisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
TECTUS - New Versions. New Versions. The completely concealed hinge system
TECTUS - New Versions New Versions The completely concealed hinge system index te 240 3d up to 40 kg 6 te 340 3d up to 80 kg 7 TE 540 3D up to 120 kg 8 TE 640 3D up to 200 kg 9 TE 540 3D A8 up to 100 kg
FUSION JULIETTE BALCONIES FITTING INSTRUCTIONS
FUSION JULIETTE BALCONIES FITTING INSTRUCTIONS The Richard Burbidge FUSION Juliette Balcony System comprises a combination of timber and aluminium rails, glass infill panels and brackets designed for use
Installation of Balustrade Systems
Installation of Balustrade Systems IMPORTANT: Be sure to mark the center point of each newel post's location prior to installation to insure proper spacing. All product interfaces must use PL Premium Adhesive
INSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
WHY LANG ALUMINUM RAILING SYSTEM?
LANG ALUMINUM RAILINGS PRODUCT PROFILE Whether you re building to sell, renovating or a property manager, Lang Do-It-Yourself Aluminum Railing Systems with the patented wrap around picket spacer, will
READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION
edium + Heavy duty READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Pay attention to danger and safety notices. be exposed: Carefully