Monday, March 11, 13. Forcible Entry
|
|
- Randall Roberts
- 6 years ago
- Views:
Transcription
1 Forcible Entry
2 Forcible Entry Size-Up Consider Type of Emergency Try before you pry Forcible entry should create as little damage as possible Both speed and minimal damage are achieved through proficiency with tools Monday, March 11, 13
3 Forcible Entry Size-Up If rapid entry is needed to save a life or prevent serious loss of property it is appropriate to use more destructive methods When the situation is less urgent Firefighters can take more time and use less force Use non emergency responses to size up how you would make entry in different situations Monday, March 11, 13
4 Forcible Entry Size-Up Type of Construction Residential/Commercial Possible entry points How entry points are secured Best tools and techniques for the situation Effect forcing entry will have on Incident Monday, March 11, 13
5 Forcible Entry Size-Up Commercial Occupancies Often more secure than residential Metal and glass doors common Overhead doors Doors spaced further apart than residential making opening up the building imperative Monday, March 11, 13
6 Forcible Entry Size-Up Usually the best points to attempt forcible entry are the doors and windows. Doors are designed as entry points Windows are not common entry points, but if next to a door could provide means to reach inside and unlock the door. Monday, March 11, 13
7 Forcible Entry Size-Up How does the door open? inward/outward, sliding What is the door made of? wood, metal, glass How is the door locked? multiple locks, drop bars, burglar bars Monday, March 11, 13
8 Forcible Entry Size-Up Which doors need to be opened for fire attack, ventilation, egress Will method chosen effect door control In less urgent situations how will method chosen effect securing the structure Monday, March 11, 13
9 Tools
10 Tools
11 Tools
12 Tools
13 Forcible Entry Techniques Thru the Lock Prying the door and jamb apart Breaking/Cutting the lock Cutting/Removing the Hinge/Pins Breaking the glass and unlocking from inside Cutting a entry hole Battering the door down Monday, March 11, 13
14 Techniques
15 Lock Cylinders
16 Lock Cylinders
17 Lock Cylinders
18 Lock Cylinders
19 K Tool 11 Designed to pull a lock cylinder allowing a key tool to be inserted to manipulate the latching mechanism Flat side toward jamb Monday, March 11, 13
20
21
22 Vise Grips
23 Protected Lock Cylinders
24 Protective ring
25 Protective ring
26 Recessed Lock Cylinders
27
28
29 Barred or Screened Windows Monday, March 11, 13
30 Barred or Screened Windows Shear off the bolt heads and remove bars or screens Break masonry at attachment point Cut bar assembly using Cut Off saw fitted with a metal cutting blade Pry away from attachment point Monday, March 11, 13
31 Barred or Screened Cut bar assembly using Cut Off saw fitted with a metal cutting blade Break masonry or anchor at attachment point Windows Monday, March 11, 13
32 Inward Swinging Door
33 Irons
34 Inward Swinging Door Gap the door. Drive the Adz end of the halligan between the door and jamb and pry down Monday, March 11, 13
35 Inward Swinging Door Sound the door high middle and low. Can show where additional locks are present. Monday, March 11, 13
36 Gap Door
37 Gap Door
38 Inward Swinging Doors Insert forked end of Halligan between door and jamb 6-8 inches from lock. (Single Lock) 6 inches above or below provides enough door flexibility while still having door integrity Monday, March 11, 13
39 Inward Swinging Doors Convex side of tool toward door Monday, March 11, 13
40 Inward Swinging Doors Force tool in and past the rabbeted stop Monday, March 11, 13
41 Inward Swinging Doors Drive the tool past the jamb without penetrating the jamb. Monday, March 11, 13
42
43 Inward Swinging Doors The fork should be driven about 1 inch past the jamb before attempting to pry the door Monday, March 11, 13
44 Inward Swinging Doors Once the tool is past the jamb, push the halligan toward the door to force it open Monday, March 11, 13
45
46
47
48
49
50
51 Inward Swinging Wood Door Drive the pike end of the halligan into the door jamb. This splits the jamb and anchors the tool for leverage. Monday, March 11, 13
52 Inward Swinging Wood The Halliagn is then forced into the door, close to the lock. This leverage then opens the door. Door Monday, March 11, 13
53
54
55 Inward Swinging Wood Door Inward swinging doors can also be forced form the hinge side. The door is struck at the top, middle, and bottom. This shears the hinge form the attaching screws. However door control is lost Monday, March 11, 13
56 Alternative Methods
57
58
59
60
61 Outward Swinging Doors Common in Commercial occupancies Designed for quick exit, open in direction of travel Usually have exposed hinges Monday, March 11, 13
62 Outward Swinging Doors Monday, March 11, 13
63 Outward Swinging Door Place halligan close to the latch. This placement allows for the greatest spread of the door. Monday, March 11, 13
64 Outward Swinging Door Drive the tool into the gap between the door and the jamb Monday, March 11, 13
65 Outward Swinging Door Pry in a downward motion, then force the door outward. This pries the latch away from the jamb. Monday, March 11, 13
66
67
68
69
70
71
72 Outward Swinging Door
73 Outward Swinging Door Monday, March 11, 13
74 Cutting Latches
75 Cutting Latches
76 Cutting Latches Latches can be cut with the Cut off saw. A tool like a Axe can be inserted to increase the width of the gap between the door and the jamb to make the opening wider and the cut easier. Monday, March 11, 13
77 Cutting Latches
78 Panic Hardware Outside View Monday, March 11, 13
79 Panic Hardware Outside View Monday, March 11, 13
80 Panic Hardware Inside
81 Panic Hardware
82 Panic Hardware
83 Panic Hardware
84
85
86
87
88
89
90
91
92
93
94 Panic Hardware Outside View Monday, March 11, 13
95
96
97 Panic Hardware Panic hardware can sometimes be defeated by inserting a tool in the shape of a J between double doors and hooking and pulling the inside bar to open the door Monday, March 11, 13
98
99
100
101
102 Outward Swinging Doors Hinges Check to see if hinges can be disassembled or hinge pins removed. Hinges can also be cut Door control could be lost if removing hinges Monday, March 11, 13
103 Cutting hinges with a K-12 saw Select a metal cutting blade for making the cut. Abrasive Vs Diamond Technique Monday, March 11, 13
104
105
106 Removing Hinges Hinges can be removed by shearing the screws that attach the hinge to the door jamb Fork end of the halligan is placed over the hinge. The halligan is the struck with a tool, shearing the hinge screws The hinge can then be pried out. Monday, March 11, 13
107
108
109 Security Drop Bars Many Commercial have installed drop bars for added security These can sometimes be seen as bolt heads in a vertical line on the exterior of the door Monday, March 11, 13
110 Security Drop Bars
111 Security Drop Bars
112 Security Drop Bars Drop Bar Monday, March 11, 13
113 Security Drop Bars Drop Bar Monday, March 11, 13
114 Security Drop Bars
115 Maverick Bars
116
117
118
119 Thanks to John Mittendorf and Monday, March 11, 13
120
121
122 Padlocks American 2000 Hocky Puck Monday, March 11, 13
123 Padlocks Cut up from the keyway thru the void Monday, March 11, 13
124
125
126
127
128
129
130
131
132 Overhead Doors 11 Design Can roll up or tilt Made of wood or metal May be hollow-core or solid-core Rolling steel Slab Sectional Monday, March 11, 13
133 Overhead Doors/ Rolling Steel Monday, March 11, 13
134 Overhead Doors/ Rolling Steel Monday, March 11, 13
135 Overhead Doors/ Rolling Steel Monday, March 11, 13
136 Overhead Doors/ Rolling Rolling Steel Door- Constructed with steel interlocking slats(2-4 inches wide) and roll around a spring loaded drum at top of door. Can be forced with K12 saw with metal cutting blade Steel Monday, March 11, 13
137 Overhead Doors/ Rolling Steel Most Rolling steel doors have been constructed with a guide every other slat. Monday, March 11, 13
138 Overhead Doors/ Rolling Steel Slats without guides can easily be pulled free. If you have trouble pulling a slat, drop down to the next lower slat and try pulling the slat free. Monday, March 11, 13
139 Overhead Doors/ Rolling Steel Use channel locks, vise grips, or the pike end of the halligan to pull a slat from either side of the vertical cut. When the slat is pulled free, all the lower slats will fall to the ground. Pull an opposing slat to release all the slat on the opposite side. Monday, March 11, 13
140
141
142 Thanks to John Mittendorf and Monday, March 11, 13
143
144
145 Overhead Doors/ Rolling Steel If guides are present every slat the door can be defeated with a second cut. 1 st cut in center, 2 nd cut on right or left if needed. Monday, March 11, 13
146 Overhead Doors/ Rolling Safety Note Steel After some of the slats are removed the door can roll up automatically. Be aware and stay out of the path of the door. Monday, March 11, 13
147 One piece Roll Up Door
148 One piece Roll Up Door Some Roll up door appear to have slats but are actually one piece. These doors can be defeated using the sectional garage door technique shown later Monday, March 11, 13
149 Thanks to John Mittendorf and Monday, March 11, 13
150
151
152 Sectional Overhead Door
153 Sectional Overhead Door
154 Sectional Overhead Door Monday, March 11, 13 Make a horizontal cut the width of the door at head height Do not cut near the joint between the sections. This would cut the hinges located on the other side of the door and unnecessarily slow
155 Sectional Overhead Door On either the right or left of the door, make a vertical cut starting approximately one foot just below the beginning of the horizontal cut. It is important not to join the horizontal cut and the vertical cut at this time since this may cause the flopping panel to bind the saw blade. Monday, March 11, 13
156 Sectional Overhead Door Continue the horizontal cut to the bottom of the door. Make a small angular cut at the bottom of the vertical cut. Make the angular cut large enough so that the saw guard can be positioned to cut the bottom bar of the door Monday, March 11, 13
157 Sectional Overhead Door Cut the bottom bar of the door. Cut the one-foot section between the horizontal and vertical cuts. The door can now be swung outward from the opening. Monday, March 11, 13
158
159
160
161
162
163
164
165
166
167
168
169 PANIC HARDWARE DOOR FOUR EXTERIOR ACCESS PLATES NO DROP BAR Monday, March 11, 13
170 EXTERIOR VIEW TOP MIDDLE BOTTOM LOCK SIDE MIDDLE HINGE SIDE Monday, March 11, 13
171 INTERIOR VIEW
172 INTERIOR VIEW TOP MIDDLE BOTTOM LOCK SIDE MIDDLE HINGE SIDE Monday, March 11, 13
173 INTERIOR VIEW LOCK SIDE ~ ⅜ ½ STEEL BAR ~ ¾ THROW TOP & BOTTOM Monday, March 11, 13
174 INTERIOR VIEW LOCK SIDE TRADITIONAL PANIC HARDWARE MIDDLE Monday, March 11, 13
175 INTERIOR VIEW STEEL BAR ON HINGE SIDE Monday, March 11, 13
176 Magnetic Locks
177 Magnetic Locks
178 Magnetic Locks
179 Magnetic Locks
180
181
182 Safety Work safely, wear eye protection, and the appropriate personal protective gear Monday, March 11, 13
TRAINING BULLETIN FORCIBLE ENTRY 1 March 15, 1997 FORCIBLE ENTRY TABLE OF CONTENTS. 1. Introduction. 2. Doors-Inward Opening. 3. Doors-Outward Opening
TRAINING BULLETIN 1 March 15, 1997 TABLE OF CONTENTS 1. Introduction 2. Doors-Inward Opening 3. Doors-Outward Opening 4. Through The Lock Method 5. Padlocks 6. American Lock Series 2000 7. Bars And Sliding
More informationESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 14 Forcible Entry Forcing Doors Revised
Truck Module Page 1 of 14 OPENING DOORS The method used to force a swinging door is determined evaluating three factors: How the door is Hung Type of Construction Locking mechanism Before attempting to
More informationObjectives. Understand the association between specific tools and special entry needs.
Forcible Entry Objectives Understand the association between specific tools and special entry needs. Describe the basic construction of typical doors, windows, and walls. Know the dangers associated with
More informationChapter 17. Forcible Entry
Chapter 17 Forcible Entry Introduction 2 ½ million homes broken into each year Owners install a variety of locking devices to protect both homes and businesses Forcible entry often one of the first operations
More informationORANGE PEEL December 6 th, 2006
December 6 th, 2006 BY: ERIC GUIDA Sacramento Fire Department Engine 57 ENGINE COMPANY OPERATIONS- RESIDENTIAL FORCIBLE ENTRY Forcible entry is usually considered a truck company operation. Engine companies
More informationForcible Entry. Workbook Activities. Chapter Review
Forcible Entry Workbook Activities The following activities have been designed to help you. Your instructor may require you to complete some or all of these activities as a regular part of your fire fighter
More informationHOW WOULD U? Forcible Entry BASIC Part 1
BASIC Part 1 on the fire ground : Needs to be done Rapidly Needs to be done Effective (no wasted time, energy, or effort ) Needs to be done Safely not just person(s) executing, but everyones This all gets
More informationSecurity Inspections are offered at no charge to Bunker Hill, Piney Point, and Hunters Creek residents.
MEMORIAL VILLAGES POLICE DEPARTMENT 11981 Memorial Drive Houston, Texas 77024 (713) 365-3700 www.mvpdtx.org Serving the cities of Bunker Hill, Piney Point, and Hunters Creek Security Inspections As a resident
More informationFORCING ENTRY SPECIALIZED FORCIBLE-ENTRY TOOLS
232 FIRE ENGINEERING S HANDBOOK FOR FIREFIGHTER I & II make rapid entry. Years later, as forcible-entry technologies and training improved, the fire ser vice began gaining entry much more quickly than
More informationMATERIALS: ASSORTMENT OF HAND TOOLS AND POWER SAWS ACQUIRED STRUCTURE OR FORCIBLE ENTRY PROPS
INSTRUCTOR GUIDE TOPIC: BACK TO BASICS: EFFECTIVE FORCIBLE ENTRY TIME REQUIRED: THREE HOURS MATERIALS: ASSORTMENT OF HAND TOOLS AND POWER SAWS ACQUIRED STRUCTURE OR FORCIBLE ENTRY PROPS REFERENCES: ESSENTIALS
More informationInstallation Instructions. Oakmont Folding Doors
Before You Start For quick and easy installation of your Oakmont folding door, read these instructions thoroughly. A few minutes of prior planning will make the job easier and ensure years of trouble-free
More informationChapter Overview NFPA Standards NFPA 1001 Standard Fire Fighter I Force entry into a structure, given personal pro-
Chapter Overview It would be nice if fires never happened behind locked doors, but reality is that fires happen when people are away, asleep, or otherwise unable to unlock the door for fire fighters. This
More informationFIRE AND RESCUE DEPARTMENTS OF NORTHERN VIRGINIA FIREFIGHTING AND EMERGENCY OPERATIONS MANUAL. Truck Company Book 2 Forcible Entry.
FIRE AND RESCUE DEPARTMENTS OF NORTHERN VIRGINIA FIREFIGHTING AND EMERGENCY OPERATIONS MANUAL Truck Company Book 2 Forcible Entry First Edition Issued: July 2018 ACKNOWLEDGEMENTS The Truck Company Book
More informationRetractable Screen Installation Instructions For Vinyl and Aluminum Clad and Wood In-Swing Hinged Doors (See separate instructions for sliding doors)
Retractable Screen Installation Instructions For Vinyl and Aluminum Clad and Wood In-Swing Hinged Doors (See separate instructions for sliding doors) IMPORTANT: Please read before you begin. Table of Contents
More informationChapter 11 Test. Directions: Write the correct letter on the blank before each question.
Chapter 11 Test Name: Date: Directions: Write the correct letter on the blank before each question. Objective 1: Explain the basic principles of forcible entry. 1. Which of the following statements about
More informationSafety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse
EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates
More information404 Doors, Doorways, and Gates
404 Doors, Doorways, and Gates 404.2 Manual Doors, Doorways, and Manual Gates. Manual doors and doorways and manual gates intended for user passage shall comply with 404.2. 404.2.2 Double-Leaf Doors and
More informationInstalling Your Electronic Deadbolt
Ultra Security Plus Electronic Deadbolt Installation Instructions http://www.hberger.com/video-gallery/electronic-deadbolt New Installation Lock Location Preparation (Skip this section if you door has
More informationTOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
More informationTruck Module Section 400
North Zone Training Manual Truck Module Section 400 FORCIBLE ENTRY Table of Contents Department Information Section Introduction 400.00 Door Construction 401.00 Forcing Doors 402.00 Forcing Windows 403.00
More informationC-Series & S-Series Classic Frame with Transom (Single or Pair)
1. TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Safety Glasses Screw gun #2 Screwdriver tip #3 Screwdriver tip Philips Head screwdriver (Used to move frame on wall using oval slots on
More informationCONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013
U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -
More informationWood Duck Nest Box Design & Assembly Directions
Wood Duck Nest Box Design & Assembly Directions Instructions, Illustrations & Photos Courtesy of MWDI and Scott Jasion, Harford County Chapter, Ducks Unlimited Side door opening design for easy mounting
More informationVictory Fire Door Inspections
Vickie Evans, FDAI Over 30 years in door and hardware industry DHI instructor and Education Advocate Certified Fire Door Inspector To compartmentalize a building Deter the spread of smoke and flames Fire
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More informationActive Push Bar. Safety glasses Measuring tape Level Pencil Power drill Drill bits: 5/32, 3/4 Center punch Phillips screw driver
EX88 Interlocking Rim Exit Device Preparation Guide and Installation Instructions Box Contents EX88 Interlocking Rim Exit Device Back Bar Filler Plate Active Push Bar Cylinder and Trim Interface Kit Mounting
More informationPassive Panel Replacement Guide
Replacement Guide for Andersen 200 Series d Patio Doors - Inswing For questions call 1-888-888-7020. For more information and/or guides visit andersenwindows.com. Please leave this guide with building
More informationSolid Core Wood Door / Steel Frame Packages
Solid Core Wood Door / Steel Frame Packages No Label - Interior Packages Machined for one (1) cylindrical lock and three (3) hinges at Republic locations 1-3/4 Solid Core Birch 1-3/4 Solid Core Oak 3/0
More informationCONCEALED VERTICAL ROD PANIC EXIT DEVICE
INSTALLATION INSTRUCTIONS CRL JACKSON 1085-1085P CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0236 ORDER OF
More informationContemporary 3 Panel Classic 5 Panel French Panel
Contemporary 3 Panel Classic 5 Panel French Panel (X) Operating / Lock Panel Left (O) Fixed Panel Right Note : Glazing Beads For All Panel Face To The Exterior 2 Panel XO Left Is Shown Above Opposite =
More informationPhone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels
Phone # 800-440-8785 www.lajolladoors.com La Jolla Doors Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Thank you for choosing La Jolla Doors In this manual you will
More informationCHALLENGER. User s Manual and Operating Instructions
The CHALLENGER Forcible Entry Training Door Simulator By IT S MORE THAN JUST A DOOR User s Manual and Operating Instructions Model # BM-DR1-14 Warning: Users of this equipment risk injury to themselves
More informationFIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
More informationHow To Measure Your Finished Opening
3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips
More information1. Begin by rolling your window up all the way 2. Remove your door and window handles by unscrewing the flat head set screws behind each handle.
1. Begin by rolling your window up all the way 2. Remove your door and window handles by unscrewing the flat head set screws behind each handle. 3. Remove the 12 screws that attach the steel interior door
More informationAtrium Patio Door Field Service Manual
Atrium Patio Door Field Service Manual December 2005 Table of contents Service Agreement Pg 2 Release Agreement Pg 5 Inspection form Pg 6 Warranty Pg 8 Replacing swing panel Pg 12 Replacing sliding panel
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationMetal & Vinyl, Flush Mount and Recessed Fin Windows Recommended Installation Instructions
PO Box 480 Ph: 417-235-7821 Monett, MO 65708 Fax: 417-737-7140 Metal & Vinyl, Flush Mount and Recessed Fin Windows Recommended Installation Instructions These installation instructions are recommendations
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 2085 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0250 ORDER OF ASSEMBLY
More information9 X 9 REMOVABLE TYPE ALUMINUM WINDOW BARS INSTALLATION INSTRUCTIONS Import Note : 9 X 9 Spacing Removable Type Installation is covered in this
Import Note : 9 X 9 Spacing Removable Type Installation is covered in this Instruction. Removable Bars Only Mount in Recess Position ( Between Window Jamb/ Frame ) The spacing between horizontal bars is
More informationVYTEX PREMIUM SLIDING GLASS DOOR. Table of Contents. Precautions and Safety 2. Tools Required...3. Inspect and Prepare Door...4
VYTEX PREMIUM SLIDING GLASS DOOR Table of Contents Precautions and Safety 2 Tools Required...3 Inspect and Prepare Door...4 Hardware and Parts Check List....4 Master Frame Assembly 5 Master Frame Installation..7
More informationINSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233
INSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233 QCI5233 Rev 0 Page 1 Certified 06/20/2016 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay
More informationIDP Entry-Fit Steel Door Frames. Installation Instructions K2A and NK2A Series Frames
IDP Entry-Fit Steel Door Frames Installation Instructions K2A and NK2A Series Frames IDP Inc 21300 W. 8 Mile Rd. Southfield, MI 48075 1-877-645-2770 www.idpframes.com email: info@idpframes.com K2A and
More information3 BRACKET TO GUIDE ATTACHMENT. RIGHT END Figure 1. EXTENDED BRACKET (for doors taller than 8-8 ) SERIES 650. RIGHT END COTTER PIN Figure 6
2 DOOR ARRANGEMENT. A Lay door on a clean floor inside of building and in front of opening (see Figure 1). NOTE: Door can be damaged if laid on unclean surface. B Distribute parts bags, guides, stops and
More informationC. Samples for Initial Selection: Manufacturer's color charts showing the full range of colors available.
SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationINSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5232
INSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5232 QCI5232 Rev 0 Page 1 Certified 06/20/2016 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 1285 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0248 ORDER OF ASSEMBLY
More informationFIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
` FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
More information1 PREPARE HEADER AND ROUGH OPENING
CONTENTS. HEADER & TRACK ASSEMBLY. END BRACKET PLAIN 3. FLOOR PLATE.. 8. 4. SPLIT STUD 6 5. CARRIER (987) 6. QUICK RELEASE PLATE (960) 7. DOOR GUIDE SET (9883) 3. 4. 7. 8. BUMPER KIT (988) 9. #8 X 3/4
More informationMORTISE LOCKS LA1Tx7 //DATASHEET
//DATASHEET SATO ocks AElement Access control requires a good, reliable door locking system. SATO offers a wide range of mortise locks in order to ensure that the door is correctly locked. Whether you
More informationPost & Rail Crossbuck
Post & Rail Crossbuck 1. Getting Started 6. Crossbuck Be sure to call underground prior to digging Assemble gates (if necessary) and decide where they will be located Stake out the fence line Space and
More informationFor installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.
SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationPART #MSP-DCCST Flat Panel Tilt Mount
INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees
More information6400, 8400 and 9400 Series Sliding Patio Door
Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel
More informationEZ-MATRIX I N S TA L L AT I O N I N S T R U C T I O N S EZ-MATRIX
TM I N S TA L L AT I O N I N S T R U C T I O N S READ THESE INSTRUCTIONS page 2 Installer Tips: Installation is best completed with the help of one or two people. Prior to beginning, please read through
More informationFindings and analysis of the tes0ng process of the MAXXIMUS REXX from Fire Hooks Unlimited
Findings and analysis of the tes0ng process of the MAXXIMUS REXX from Fire Hooks Unlimited As performed by Sean Wilson and ScoA Gardner of SEARCH & DESTROY FIRE TRAINING Introduc0on What follows are the
More informationHP COLOR LASERJET 3500
HP COLOR LASERJET 3500 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS HP COLOR LASERJET 3500 TONER CARTRIDGE REMANUFACTURING THE HP 3500 COLOR LASERJET TONER CARTRIDGE By Javier Gonzalez and the Technical
More informationINSTALLATION FRIENDLY
SWING PATIO DOORS 15 SENTRY MULTI-POINT The market driven solution for operable sidelites Truth Hardware s Sentry Multi-Point Sidelite Hardware is the perfect complement to Truth s family of Sentry Patio
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationPage 1 of Ch 6. A Lecture note on Building Technology By Kishor Thapa
CHAPTER-6 Doors and windows 6.1 Doors: frames, shutters and their fixing details The function of a door is to give access to building and to different parts of the building and to deny the access whenever
More informationInstalling Electronic Media Storage Components into Lateral File Cabinets
Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 Installing Electronic Media Storage Components into Lateral File Cabinets 830-CH-9 830-CH-12 830-CH15 836-CH-9 836-CH-12 836-CH-15 842-CH-9
More informationPre-Hanging Information
Pre-Hanging Information Difference between Door Slab and Pre-hung Door Door Slab Only Door Slab Only No handle preparation. No deadbolt preparation. No frame or hinges included. Pre-hung door Door unit
More informationFigure #1 - VSNEO Shower Door Assembly
Figure #1 - VSNEO Shower Door Assembly Figure #2 - VSNEO - Top View Figure #3 - VSNEO - Side View Figure #4 - Foam Curb Plug Figure #5 - Magnet Strip Figure #6 - VSNEO - Drip Deflector Preparation VSNEO
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
More informationReplacement Guide. For Handle Side Z-bar on Fullview Doors with Laminated Glass and Multi-Point Locking System RECOMMENDED TOOLS:
Replacement Guide For Handle Side Z-bar on Fullview Doors with Laminated Glass and Multi-Point Locking System IMPORTANT: READ ENTIRE GUIDE BEFORE BEGINNING INSTALLATION. PLEASE NOTE: Proper assembly, installation
More information4-lite Patio Door. Installation Instructions
4-lite Patio Door Installation Instructions IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. Note: Only the 5-0 x 6-8
More informationinstallation guide
JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000
More informationChapter 9. Windows and Exterior Doors
Chapter 9. Windows and Exterior Doors 9.1 INSTALLING WINDOWS 9.2 INSTALLING EXTERIOR HOUSE DOORS 9.3 INSTALLING SHED DOOR 9.4 INSTALLING EGRESS COMPONENTS Tools needed by volunteers: Hammer Nail apron
More informationHorizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS v2012 orizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications:
More informationChapter 18. Interior Doors
Chapter 18. Interior Doors 18.1 SWINGING DOORS 18.2 SLIDING DOORS 18.3 BIFOLD DOORS Tools needed by volunteers: Hammer Nail apron Tape measure Square Pencil Tools and equipment needed: Extension cords
More informationINSTALLATION OF THE TRACK FOR THE STRAIGHT SIDE STEEL LADDER
ASSEMBLY OF THE 7180 STRAIGHT SIDE STEEL LADDER TOOLS REQUIRED FOR ASSEMBLY SAFETY GLASSES (2) 1 / 2 WRENCHES OR SOCKETS STEP LADDER OF APPROPRIATE HEIGHT (2) 7 / 16" WRENCHES OR SOCKETS HACKSAW FLAT HEAD
More informationFold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE
Fold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE This instruction guide provides the minimum recommended procedures to correctly prepare the rough opening, install a fold-a-way patio door unit and apply
More information376E Series Exit devices
376E Series Exit devices The Briton 376E Series is an economical range of push bar devices designed to suit single and double door applications. The 376E Series can be used on aluminium, hollow metal or
More informationseries 9500 top load bi4fold installation instructions
instructions Head Deflection (+0.12 / -0.00 ) Right Jamb Note: This is a top hung product. Provide adequate structure at head. Continuous threshold support is required. Left Jamb Head 4Lay bed of sealant
More informationMeasuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware
Recommendations for Measuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware By Keith E. Pardoe Speed, accuracy, and above all consistency are essential when determining the clearance
More informationESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 10 Ventilation Commercial Operations Revised
Truck Module Page 1 of 10 COMMERCIAL OPERATIONS VERTICAL Vertical ventilation for commercial application will involve a minimum of three personnel. There are three positions that shall be filled by ventilation
More informationAluminum Continuous Geared Hinges
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
More information*D-1030* 1 PARTS CHECK 8 REVERSING INSTRUCTIONS F-XX-C & XX-C D Customer Service. Installation Instructions. Exit Devices
*D-1030* D-1030 F-XX-C & XX-C Exit Devices Installation Instructions 8 REVERSING INSTRUCTIONS TO REVERSE THE HANDING OF A (F)XX-C DEVICE NOTE: TO REVERSE TRIM, REFER TO SEPARATE INSTALLATION SHEETS. 1
More informationGARAGE DOOR WITH TORSION SPRING
GARAGE DOOR WITH TORSION SPRING DIMENSIONS 9 WIDTH X 7 HEIGHT (2.74m x 2.13m) IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all instructions and warnings before use. Failure to follow all instructions may
More informationBEFORE STARTING INSTALLATION
VON DUPRIN Installation Instructions 22 Rim Device Devices covered by these instructions: 22 Rim Device 22-F Fire Exit Rim Device BEFORE STARTING INSTALLATION 1. Check hardware schedule for strikes, fasteners,
More informationPrivacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
More informationEntry Mortise Lock Set Lever to Lever
Entry Mortise Lock Set Lever to Lever 1 Lever 2 Escutcheon 3 Turn Piece 4 Mortise Lock 5 Scalp 6 Mortise Lock Strike 7 Mortise Lock Dust Box 8 Mortise Cylinder 9 Cylinder Swing Cover 10 Spindle 11 Spindle
More informationFRAMED PANEL / DOOR / PANEL CONTINUOUS HINGE SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS
FRAMED / DOOR / CONTINUOUS HINGE SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS QCI5229 Rev 0 6 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts
More informationUNIVERSAL ASSEMBLY INSTRUCTIONS FOR VERSATUBE GARAGE BUILDINGS
UNIVERSAL ASSEMBLY INSTRUCTIONS FOR VERSATUBE GARAGE BUILDINGS SINGLE DOOR GARAGE AVAILABLE IN 12, 20, 24 AND 30 WIDTHS DOUBLE DOOR GARAGE AVAILABLE IN 24 AND 30 WIDTHS Our unique assembly process quickly
More information4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162
DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP
More informationSash Replacement Guide for Andersen 400 Series Tilt-Wash Transom Windows
for Andersen 400 Series Tilt-Wash Transom Windows Read all instructions carefully before attempting this procedure. If you have any questions about your ability to complete this procedure, call Andersen
More informationSliding Glass Door Assembly and Installation Guide
Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all
More informationKNOB LATCH. Specifications: Glass-To-Wall Installation CAT NO. LAT001 C.R. LAURENCE CO., INC. PROFESSIONAL QUALITY
Specifications: Material: Solid brass Hole Size Required: 7/8" (22mm) Glass Thickness Range: 3/8" (10mm) to 1/2" (12mm) Includes: Knob, Tapered Strike for wall-to-glass installation and J-Hook for glass-to-glass
More informationMP Panic Exit Police Lock. Review Of March 2004 Installation
MP Panic Exit Police Lock Introduction To Installing The MP4900 Panic Exit Police Lock A little bit of knowledge before getting to the door can go along way towards simplifying the installation Bob Hart
More informationMETAL BLINDS. Deluxe GETTING STARTED OPTIONAL HARDWARE. A few simple tools are required: STANDARD HARDWARE
METAL BLINDS Deluxe GETTING STARTED OPTIONAL HARDWARE A few simple tools are required: Steel Tape Measure Pencil Level Hold Down Brackets with Screws Extension Bracket Power Drill and Drill Bits Flathead
More informationPlease read and understand all instructions before beginning. These instructions cover impact and non-impact aluminum French Door 650/750.
The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand
More information2300 BI-FOLD INSTALLATION GUIDE
2300 BI-FOLD INSTALLATION GUIDE INSTALLATION INSTRUCTIONS OF MAIN FRAME Header #8 x 2½ zinc coated screws 2 1 2 Jamb Jamb 1 1 3 #8 x 2½ zinc coated screws 4 1 4 3 #8 x 2½ zinc coated screws 5 Threshold
More informationHR175 Sash Replacement Kit Installation Instructions
HR175 Sash Replacement Kit Installation Instructions IMPORTANT: Please read before you begin. Weather Shield HR175 Sash Replacement Kits Important: Thoroughly read and follow these instructions, failure
More informationWorld s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form
World s Leading Manufacturer Of Traffic Doors Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors 2809 SW th Street Redmond, OR 97756 Phone:
More informationPMR ELECTRONIC LOCK USER GUIDE
封底 封面 148.5 x 210(mm) www.ezset.com.tw PMR ELECTRONIC LOCK USER GUIDE 封面裡 Parts Introduction Do not use an electric screwdriver when installing the product! Installation Procedures 1. Draw horizontal lines
More informationINSTALLATION INSTRUCTIONS. PLASMA TV WALL MOUNT TILT Universal (RGTU-210) WARNINGS WARNING
PLASMA TV WALL MOUNT TILT Universal (RGTU-210) S CAUTION CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION alerts you to the possibility
More informationDoor Hardware Installation Instructions. For Assistance Call:
For Assistance Call: Door Hardware Installation Instructions Single Cylinder NOTE: s fit doors 1-3/4 to 2-1/4 thick. For thicker doors, please call customer service. Carefully unpackage all components
More informationI n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS
I n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS Page 2-9: Installation Instructions, Figures 1, 2, & 3 Page 10-12: Figures A-1, A-2, & A-3: Installation
More information