BASE PLATES - GRASS Face Frame Cabinet Style...B-39 Nexis Series...B-40 to B Series...B-42

Size: px
Start display at page:

Download "BASE PLATES - GRASS Face Frame Cabinet Style...B-39 Nexis Series...B-40 to B Series...B-42"

Transcription

1 Section index COMPACT FACE FRAME HINGES...-2 to -6 STANDARD APPLICATION HINGES 94 Degree Opening Degree Opening...-8 to Degree Opening to Degree Opening to Degree Opening to Degree Opening to -19 SPECIALTY APPLICATION HINGES Thick & Profile Door to -23 lind Corner to -25 Pie Cut Corner to -26 Positive & Negative Angle to -30 Glass Door Hinge Push To Open to -32 SALICE SILENTIA INTEGRATED SOFT-CLOSE HINGES to -37 MISCELLANEOUS CONCEALED HINGES Surface Hinge Mitre Hinge Fascia Hinge ASE PLATES - GRASS Face Frame Cabinet Style Nexis Series to Series ASE PLATES - SALICE Salice Mounting Plate Selection Guide Face Frame Cabinet Style Frameless Cabinet Style to -46 ASE PLATES - TITUS HINGE SOFT-CLOSE ADAPTERS Grass to -49 Salice to -51 Titus GRASS/WURTH HINGE ACCESSORIES SALICE HINGE ACCESSORIES UY-AER ( ) Fax:

2 ONE Piece face frame hinges 106 degree one piece self-closing face frame hinges Two & Three Cam Adjustment/Overlay from 1/4 to 1-7/16 Salice Excentra and Excen-three face frame hinges have all steel one piece construction with nickel plating to resist corrosion and have a lifetime warranty A cup depth of only 11mm allows this hinge to be used on most door styles Excentra, two cam adjustment hinges provide: cam depth adjustment (+2.8mm to -0.5mm), cam lateral adjustment (+3.0mm to -2mm) and slotted screw hole height adjustment (+/-2mm) Excen-three, three cam adjustment hinges provides: cam depth adjustment (+2.8mm to -0.5mm), Excentra cam lateral adjustment (+3.0mm to -2mm) and cam height adjustment (+/-2mm) Hinge cup edge drilling distance is 2.5mm Excentra and Excen-three hinges with overlays of 1/2 and greater have zero door protrusion Hinge is designed to work with cabinet doors up to 3/4 thick Excentra and Excen-three hinges are available in two cabinet door fixing designs: Screw-On via two #6 x 5/8 wood screws (not included) and Press-In 8mm dowels All hinges are self-closing design Excen-three Press-In Excentra and Excen-three face frame hinges are designed to work with Salice Type U soft-close devices illustrated on page -50 Packing: 300 hinges per box. Sold in: oth broken and full box quantities. Discount available for 50 hinges and full box orders. two cam one piece face frame hinges Overlay Close Type Screw-On Cup Press-In 45mm 1/4 Self-close UCSP3Y99 UCSR3Y99 45mm 5/16 Self-close UCSP3Z99 UCSR3Z99 45mm 3/8 Self-close UCSP3999 UCSR mm 7/16 Self-close UCSP3899 UCSR mm 1/2 Self-close UCSP3799 UCSR mm 9/16 Self-close UCSP3699 UCSR mm 5/8 Self-close UCSP3599 UCSR mm 3/4 Self-close UCSP3499 UCSR mm 1 Self-close UCSP3299N UCSR3299N 45mm 1-1/8 Self-close UCSP3199N UCSR3199N 45mm 1-1/4 Self-close UCSP3A99N UCSR3A99N 45mm 1-5/16 Self-close UCSP399N UCSR399N 45mm 1-3/8 Self-close UCSP3C99N UCSR3D99N 45mm 1-7/16 Self-close UCSP3D99N UCSR3D99N THREE cam one piece face frame hinges Overlay Close Type Screw-On Cup Press-In 45mm 1/2 Self-close UCSP3799XR UCSR3799XR 45mm 9/16 Self-close UCSP3699XR UCSR3699XR 45mm 5/8 Self-close UCSP3599XR UCSR3599XR 45mm 3/4 Self-close UCSP3499XR UCSR3499XR 45mm 1 Self-close UCSP3299NR UCSR3299NR 45mm 1-1/4 Self-close UCSP3A99NR UCSR3A99NR 45mm 1-5/16 Self-close UCSP399NR UCSR399NR 45mm 1-3/8 Self-close UCSP3C99NR UCSR3C99NR 45mm 1-7/16 Self-close UCSP3D99NR UCSR3D99NR 1/4 to 3/4 Overlays Minimum A = 8.3mm A 1 to 1-7/16 Overlays Minimum A = 5.2mm A Excentra & Excen-three Frame Fastening Screw: Two cam 1/4 to 7/16 overlay use #10 x 1 screws Two cam 1/2 and greater overlay use#10 x 3/4 screws Three cams all overlays use two #6 x 5/8 screws Excen-three CAM lateral adjustment Excen-three CAM depth adjustment Excen-three CAM height adjustment - 2 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

3 ONE Piece face frame hinges 108 degree one piece face frame hinge Two Cam Height & Depth Adjustment/Overlays from 1/4 to 1-1/2 The Grass face frame TEC 864 Series hinge line is made in the USA and is engineered to exceed industry standards for load rating, opening and closing cycles All TEC 864 hinges feature a solid metal cup and all moving mechanism parts have all-steel construction 108 degree TEC 864 hinges are designed to work with doors up to 3/4 thick TEC hinges have a shallow, 10.5mm (13/32 ) cup to accommodate most profiled door edges TEC 864 hinges have two cabinet mounting options: side mount and wrap-around mount. The wraparound mount style mounts on 3/4 thick face frames by positively locating hinge base on the face frame The 108 degree hinge has three dimensional adjustment: (1) cam side adjustment ( +/- 1.5mm) (2) cam depth adjustment (2.5mm out and.5mm in) and (3) slotted screw hole height adjustment (+/- 2mm) see illustration below Available in 2 cabinet door cup fastening designs: Screw-On & Doweled Available boring patterns; 42mm and 45mm Uses #6 x 5/8 flat head for hinge cup and #8 x 3/4 pan head screws to fasten base plate to face frame (see page -53) Packing: Full boxes of 300 hinges. Sold In: oth broken and full box quantities. Discount available for full box orders. side mount TEC 864 Hinges Overlay Screw-On Cup Item # Item # 42mm 1/4 GF GF mm 1/4 - GF mm 1/2 GF GF mm 1/2 - GF mm 3/4 GF GF mm 3/ mm 1 GF GF mm 1 - GF mm 1-1/4 GF GF mm 1-1/4 - GF mm 1-3/8 GF GF mm 1-3/8 - GF mm 1-1/2 GF GF mm 1-1/2 - GF wrap around mount TEC 864 Hinges Overlay Screw-On Cup 42mm 1/4 GF GF mm 1/4 - GF mm 1/2 GF GF mm 1/2 - GF mm 3/4 GF GF mm 3/4 - GF mm 1 - GF mm 1 - GF mm 1-1/4 GF GF mm 1-1/4 - GF mm 1-3/8 GF GF mm 1-3/8 - GF mm 1-1/2 GF GF mm 1-1/2 - GF Closed Door Dimensions Minimum Reveal Dimensions #8 x 3/4 pan head screw 9.5 (3/8 ) 8.5 (11/32 ) Arm Clearance Open Door Dimensions Door Clearance Min. Reveal 108 Degree Max. Door Thickness 19 (3/4 ) Overall Dimensions 42mm Drilling 45mm Drilling 1. Side Adjustment 2. Height Adjustment 3. Depth Adjustment 800-UY-AER ( ) Fax:

4 one piece face frame hinges 108 degree one piece face frame hinge with integrated soft-close Two Cam Height & Depth Adjustment/Overlays from 1/2 to 1-1/4 Grass TEC Soft-Close Series hinge with soft-close have a soft-close mechanism built into the hinge cup No additional parts or installation required Shallow drilling depth remains unchanged from standard TEC 864 series, 13/32 (10.5mm) The closing force automatically adjusts to the door size and weight Made in USA all the same features of the standard TEC 864 series hinges plus soft-close Three dimensional adjusting hinge, cam side adjustment (+/- 1.5mm) cam depth adjustment (2.5mm out.5mm in) and slotted screw height adjustment (+/-2mm) Wrap style base plate design makes for easy door installation on 3/4 thick face frames Available in both 42mm and 45mm boring pattern doweled hinge cup for machine insertion Uses #6 x 5/8 flat head for hinge cup and #8 x 3/4 pan head screws to fasten base plate to face frame (see page -53) Packing: Full box quantities of 300 hinges. Sold In: oth broken and full box quantities. Discount available for full box orders. Soft-close with wrap around mount Overlay Doweled Cup 42mm 1/2 GF mm 1/2 GF mm 1 GF mm 1 GF mm 1-1/4 GF mm 1-1/4 GF NOTE: See page -3 for TEC Soft-Close Hinge dimensions Number of Hinges Per Door AVAILALE FALL 2011! 8.5 (11/32 ) Arm Clearance 108 degree one piece face frame hinges Economy 1/2 & 7/16 Overlay The Grass TEC 861 is an economy priced one piece face frame hinge Made in USA all metal construction exceeds industry standards for weight and closing cycles Hinge features a shallow cup depth of 10.5mm (13/32 ) perfect for edge profile doors Face frame mounting plate has locating tabs for easy fastening to face frames Drilling distance for all overlays is 2.5mm ( 3/32 ) from door edge For door thickness from 1/2 to 3/4 Use #8 x3/4 pan head screw to mount to face frame and #6 x 5/8 flat head screws to attach hinge cup to door (see page -53 for screws) Side adjustment can be achieved using 1/16 spacer (see page -53) Packing: Full box quantity of 400 hinges. Sold In: oth broken and full box quantities. Discount available for full box orders. 108 Degree Clearances Door Open Door Clearance Max. Door Thickness 19 (3/4 ) Minimum Reveal Dimensions #8 x 3/4 pan head screw 9.5 (3/8 ) Min. Reveal Dimensions Door Closed Overlay Doweled Cup side mount TEC mm 7/16 GF wrap around TEC mm 1/4 GF mm 1/2 GF adjustment spacer 1/16-1/2 GF Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

5 ONE Piece face frame hinges 108 degree one piece face frame hinges For MDF Frame Material, 1/2 Overlay The Grass TEC 861 MDF material face frame hinge has a patented wrap around base plate specifically designed for use with MDF face frame material this design helps prevent material splitting Made in USA, all metal construction exceeds industry standards for weight and closing cycles Order hinge based on MDF frame thickness, three specific MDF thickness hinges are available: 1/2, 5/8 and 3/4 Available with doweled cup cabinet attachment only Use #8 x3/4 pan head screw to mount to face frame and #6 x 5/8 flat head screws to attach hinge cup to door (see page -53 for screws) Packing: Full box quantity of 250 hinges. Sold In: oth broken and full box quantities. Discount available for full box orders. Overlay Doweled Cup MDF Frame Thickness wrap around 861 for mdf face frames 42mm 1/2 GF /2 42mm 1/2 GF /8 42mm 1/2 GF /4 adjustment spacer 1/16-1/16 - GF Dimensions Door Closed Minimum Reveal 108 degree two piece face frame hinges For Face-Mount Applications Grass TEC 862 Series two-piece hinge consists of hinge and face mount plate combination making door installation easier Made in the USA, this hinge exceeds industry standards for weight and closing cycles Loose hinge All metal construction features a shallow cup depth of 10.5mm perfect for edge profile doors Position base plate on front of face frame to achieve variable overlays perfect for re-facers For overlays 1-3/8 and greater Drilling distance is 2.5mm ( 3/32 ) from door edge For door thickness from 5/8 to 3/4 Loose base plate Order hinge cups and face mount base plate separately Available in doweled cup and screw on cabinet attachment Available in 42mm and 45mm boring patterns Use #6 x 5/8 flat head screws to mount to face frame and door to hinge cup (see page -53 for screws) Packing: Full box quantity of 50. Sold In: oth broken and full box quantities. Discount available for full box orders. Screw-On Cup Doweled Cup tec 862 series loose hinge cups 42mm GF GF mm - GF ase plate Overlay base plates (face mount) 1-3/8 min. GF Side Adjustment 1.5mm 2. Height Adjustment +/-2mm 3. Minimum Reveal Dimensions Door Closed Minimum Reveal Min. Reveal Overall Dimensions 800-UY-AER ( ) Fax:

6 face frame hinges 110 degree two piece face frame hinges Multiple Pivot Hinge Multiple pivot hinge allows tight gap between door and frame All metal construction exceeds industry standards for weight and closing cycles 1/2 or 11/16 overlay based on base plate chosen Height, depth and side adjustment of 2mm Order hinge arm and base plate separately Use #6 x 5/8 flat head screws for base plates and cup fastening (see page -53 for screws) Packing: Full box quantity of 500 hinge arms and 500 base plates. Sold In: oth broken and full box quantities. Door Closed Discount available for full box orders. tec 872 series Screw-On Cup Doweled Cup 45mm GF43727 GF872VS-845 Overlay ase plate base plates 1/2 GF /16 GF /16 Overlay 1. Side Adjustment 2. Height Adjustment 3. Depth Adjustment Overall Dimensions 130 degree one piece face frame hinges Designed For Minimal Gap/Reveal Grass ACC 140 hinge is designed to give a frameless look to face frame cabinet construction Precision face frame hinge with true Euro hinge function small gaps Suitable for overlays from 26mm 29mm ( 1-1/32 to 1-1/8) Screw-on cup (48mm spread) only For door thickness 5/8 to 3/4 Uses #6 x 5/8 flat head for hinge cup fastening and #8 x 3/4 pan head for base plate to face frame (see page -53 for screws) Packing: 125 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. Minimum Reveal Dimensions Door Closed 2 Overall Dimensions Overlay acc 140 hinge Screw-On Cup 48mm 1-1/32 to 1-1/8 GF Side Adjustment 2. Height Adjustment - 6 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

7 standard application hinges 94 DEGREE self-closing & free swinging Full, Half Overlay & Inset Salice 200 Series hinges are designed for use in both residential and commercial cabinets Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants and has a lifetime warranty 200 Series 94 degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 8mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing and free swinging versions Series 200 hinges are compatible with Smove soft-close devices on pages -50 to -51 Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Full box quantity of 50 each. Sold in: oth broken and full box quantities. Discount available for full box orders. Full Overlay D = (15 + K) - H Close Type Screw-on Cup Press-in Dowel Cup Cam Lock Rapido Tool Free Logica full overlay hinges 45mm Self-Closing UC2P7A99 UC2R7A99 UC277A99 UC2J7A99 45mm Free Swinging UC2P5A99 UC2R5A half (3/8 ) overlay hinges 45mm Self-Closing UC2P7G99 UC2R7G99 UC277G99 UC2J7G99 45mm Free Swinging UC2P5G99 UC2R5GA inset hinges 45mm Self-Closing UC2P7P99 UC2R7P99 UC277P99 UC2J7P99 45mm Free Swinging UC2P5P99 UC2R5P Half (3/8 ) Overlay D = (6 + K) - H Full Overlay Arm Half (3/8 ) Overlay Arm Inset D = (-2 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Inset Arm 800-UY-AER ( ) Fax:

8 standard application hinges 110 degree self-closing & Free swinging Full, Half Overlay & Inset Grass America s Nexis & Nexis Impresso (tool-less cabinet door fastening design) hinges are designed for frameless and face frame cabinets Nexis 110 degree opening hinges have: - Cup depths of 11mm (Nexis) and 11.5mm (Nexis Impresso) - Hinge cup edge drilling distance of 3mm to 7mm - Single screw side-to-side adjustment of +1mm to -3mm - patterns of 42mm, 45mm and 48mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup, Nexis Impresso tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing and free swinging versions Nexis hinges are compatible with Nexis hinge soft-closing adapters shown on pages -48 to -49 Nexis hinges are designed to work with the Grass mounting plates shown on pages -39 to -41 Packing: Hinges come in full boxes of 250 or 125 as shown below. Sold In: oth broken and full box quantities. Discount available for full box orders. Close Type Full ox Qty: 250 Doweled Cup Full ox Qty: 250 Cup Dimensions Tool less (Impresso) Full ox Qty: 125 FULL OVERLAY HINGES 42mm Self-Closing GF GF GF mm Self-Closing GF GF mm Free Swinging GF GF mm Self-Closing GF GF GF Half Overlay Hinges 42mm Self-Closing GF GF GF mm Self-Closing GF GF mm Free Swinging GF GF mm Self-Closing GF GF GF inset hinges 42mm Self-Closing GF GF GF mm Self-Closing GF GF mm Free Swinging GF GF mm Self-Closing GF GF GF Nexis NOTE: GF fits 12mm & 45mm boring patterns. GF fits 45mm & 48mm boring patterns. Full Overlay Half Overlay Inset - 8 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

9 standard application hinges 110 DEGREE SELF-CLOSING & FREE SWINGING HINGES Full, 1/2, Half Overlay & Inset Salice Series 200 hinges are designed for use in both residential and commercial cabinets and have a lifetime warranty Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants 200 Series 110 degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing and free swinging versions Series 200 hinges are compatible with Smove soft-close door devices illustrated on page -50 to -51 Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Also available with Silentia: Integrated soft close action (see page -34) Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Press-in Dowel Cup Cam Lock Rapido Cup Tool Free Logica Cup full overlay hinges 45mm Self-Closing UC2P6A99 UC2R6A99 UC276A99 UC2J6A99 45mm Free Swinging UC2P4A99 UC2R4A /2 overlay hinges 45mm Self-Closing UC2P6D99 UC2R6D99 UC276D99 UC2J6D99 45mm Free Swinging UC2P4D99 UC2R4D half (3/8 ) overlay hinges 45mm Self-Closing UC2P6G99 UC2R6G99 UC276G99 UC2J6G99 45mm Free Swinging UC2P4G99 UC2R4G inset hinges 45mm Self-Closing UC2P6P99 UC2R6P99 UC276P99 UC2J6P99 45mm Free Swinging UC2P4P99 UC2R4P Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Full 1/2 Half (3/8 ) Inset Overlay D = (15 + K) - H Overlay D = (10 + K) - H Overlay D = (6 + K) - H D = (-2 + K) - H 800-UY-AER ( ) Fax:

10 standard application hinges 110 Degree self-closing hinges Full, Half Overlay & Inset Lama hinges are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a Lifetime warranty Lama hinges are available in two depth adjustment types: ST+ version which has +/-1.5mm of depth adjustment via a cam on the hinge arm and the ST version which has +5, -1.5mm of depth adjustment via manually loosening an affixing screw Lama 110 degree opening hinges have: - Cup depth of 11.5mm - Hinge cup edge drilling distance of 3mm to 5mm - 42mm and 45mm boring patterns - Three cup fastening designs: screw-on, knock-in 8mm doweled and Easy Fix three quarter turn expanding dowel See page -47 for Lama hinge mounting plates Packing: 200 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. ST + HINGES with cam depth adjustment Close Type Full ox Qty: 200 Full ox Qty: 200 Easy Fix Cup Full ox Qty: 200 Full overlay hinges 45mm Self-Closing TT248.0T TT248.0T TT248.0T half overlay hinges 45mm Self-Closing TT248.0V TT248.0V TT248.0V ST HINGES with manual screw depth adjustment Close Type Full ox Qty: 200 Full ox Qty: 200 Easy Fix Cup Full ox Qty: 200 Full overlay hinges 45mm Self-Closing TT TT TT mm Self-Closing - TT248.0U half overlay hinges 45mm Self-Closing - TT TT inset hinges 45mm Self-Closing TT TT TT Full Overlay Half Overlay Inset Plate X K Plate Plate X K Plate X Plate Screw-on Doweled & Easy Fix Doweled D=Plate F insertion ram Description ox Qty For 110 and 125 TTLARM X = Desired overlay in MM D = Height of base plate in MM K = Hinge cup drilling distance - 10 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

11 standard Application HINGES 110 degree heavy duty self-closing & Free swinging hinges Full Overlay & Half Overlay Grass 3000 Series hinges are widely regarded as the strongest concealed hinges in the industry The 3000 Series 110 degree opening is ideal for store fixtures, office, high usage and other demanding applications All metal construction - moving parts are constructed of hardened steel for durability Grass 3000 Series 110 degree opening hinges have: - Cup depth of 12.8mm - Hinge cup edge drilling distance of 3mm to 6mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled for machine insertion and Multi-Lock, quarter turn expanding dowels for quick and efficient insertion and removal of hinge to/from door Available in self-closing and free swinging versions Grass 3000 Series hinges are designed to work with the mounting plates illustrated on page -42 Packing: Hinges come in full boxes of 50. Sold In: oth broken and full box quantities. Discount available for full box orders. Full Overlay Full ox Qty: 50 Full ox Qty: 50 Multi-Lock Full ox Qty: 50 FULL OVERLAY HINGES 42mm Self-Closing GF GF GF mm Free Swinging - GF Half Overlay Hinges 42mm Self-Closing GF GF GF mm Free Swinging - GF Half Overlay Cover Caps Description ox Qty lack Cover Caps - Full Overlay GF lack Cover Caps - Half Overlay GF Hinge Adjustments 1 Side Adjustment...+/-2mm 2 Depth Adjustment...+2mm 3 Height Adjustment...+/-2mm Note: Use a POZI drive screwdriver for hinge adjustments. Fastening screws: #6 x 5/8 FHP 800-UY-AER ( ) Fax:

12 standard application hinges 120 DEGREE SELF-CLOSING & Free swinging HINGES Full, 1/2 & Half Overlay Salice Series 200 hinges are designed for use in both residential and commercial cabinets and have a lifetime warranty Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants 200 Series 120 degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing and free swinging versions Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -44 Series 200 hinges are compatible with Smove soft-close devices illustrated on page -50 to -51 Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Screw-on Cup Press-in Cam Lock Rapido Cup Tool Free Logica Cup full overlay hinges 45mm Self-Closing UC2P9A99 UC2R9A99 UC279A99 UC2J9A99 45mm Free Swinging UC2P8A99 UC2R8A /2 overlay hinges 45mm Self-Closing UC2P9D99 UC2R9D99 UC279D99 UC2J9D99 45mm Free Swinging UC2P8D99 UC2R8D Half (3/8 ) overlay hinges 45mm Self-Closing UC2P9G99 UC2R9G99 UC279G99 UC2J9G99 45mm Free Swinging UC2P8G99 UC2R8G Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Full Overlay 1/2 Overlay Half (3/8 ) Overlay D = (15 + K) - H D = (10 + K) - H D = (6 + K) - H - 12 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

13 standard application hinges 120 degree heavy duty self-closing hinges Full & Half Overlay The Grass 3000 Series hinges are widely regarded as the strongest concealed hinges in the industry The 3000 Series 120 degree opening hinges are ideal for store fixtures, office, high usage and other demanding applications All metal construction - moving parts are constructed of hardened steel for durability Grass 3000 Series 120 degree opening hinges have: - Cup depths of 12.8mm - Hinge cup edge drilling distance of 3mm to 5mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled for machine insertion and Multi-Lock, quarter turn expanding dowels for quick and efficient insertion and removal of hinge to/from door Grass 3000 Series hinges are designed to work with the mounting plates on -42 Available in self-closing and free swinging versions Packing: Hinges come in full boxes of 50. Sold In: oth broken and full box quantities. Discount available for full box orders. Full Overlay Full ox Qty: 50 Full ox Qty: 50 Multi-Lock Full ox Qty: 50 FULL OVERLAY HINGES 42mm Self-Closing GF GF GF Half Overlay Hinges 42mm Self-Closing GF GF Cover Caps Description ox Qty lack Cover Caps - Full Overlay GF lack Cover Caps - Half Overlay GF Half Overlay Hinge Adjustments 1 Side Adjustment...+/-2mm 2 Depth Adjustment...+2mm 3 Height Adjustment...+/-2mm Note: Use a POZI drive screwdriver for hinge adjustments. Fastening screws: #6 x 5/8 FHP UY-AER ( ) Fax:

14 standard application hinges 125 degree self-closing hinges Full & Half Overlay Grass Nexis and Nexis Impresso (tool-less cabinet door fastening design) hinges with 125 degree opening angle offer an alternative for wide angle applications suitable for frameless and face frame applications For door thickness up to 19mm (3/4 ) Nexis 125 degree opening hinges have: - Cup depths of 11.8mm (Nexis) and 12mm (Nexis Impresso) - Hinge cup edge drilling distance of 3mm to 6mm - Single screw side-to-side adjustment of +1mm to -3mm - patterns of 42mm and 45mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup. Tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing only Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Full Overlay Nexis hinges are designed to work with the Grass mounting plates on -39 to -41 Packing: Hinges come in full boxes of 250. Sold In: oth broken and full box quantities. Discount available for full box orders. Full ox Qty: 250 Full ox Qty: 250 Tool-less (Impresso) Full ox Qty: 250 FULL OVERLAY HINGES 42mm Self-Closing GF GF mm Self-Closing - GF /45mm Self-Closing - - GF /48mm Self-Closing - - ME mm Self-Closing ME ME Half Overlay Hinges 42mm Self-Closing GF GF mm Self-Closing - GF /45mm Self-Closing - - GF /48mm Self-Closing ME mm Self-Closing - ME Cover Caps Description ox Qty Steel, Nickel Plated - Full Overlay GF ,000 Steel, Nickel Plated - Half Overlay GF ,000 NOTE: GF fits 45mm & 48mm boring patterns. Half Overlay - 14 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

15 standard application hinges 125 degree self-closing hinges Full Overlay Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a lifetime warranty Lama hinge ST+ version which has +/-1.5mm of depth adjustment via a cam on the hinge arm Lama 125 degree opening hinges have: - Cup depth of 12.5mm - Hinge cup edge drilling distance of 3mm to 5mm - 45mm boring patterns - Three cup fastening designs: Screw-on, Knock-in 8mm Doweled and Easy Fix three quarter turn expanding dowels See page -47 for Lama hinge mounting plates Packing: Full box quantity of 200. Sold In: oth broken and full box quantities. Discount available for full box orders. ST + HINGES with cam depth adjustment Close Type Full ox Qty: 200 Full ox Qty: 200 Easy Fix Cup Full ox Qty: 200 Full overlay hinges 45mm Self-Closing TT248.0U TT248.0U TT248.0U Full Overlay Plate Screw-on Doweled & Easy Fix K X D=Plate insertion ram Description ox Qty For 110 and 125 TTLARM X = Desired overlay in MM D = Height of base plate in MM K = Hinge cup drilling distance For Wooden Doors Adjustments Side Adjustment +3/-1mm Height Adjustment +2/-2mm Depth Adjustment +1.5/-1.5mm 800-UY-AER ( ) Fax:

16 standard application hinges 165 DEGREE SELF-CLOSING & FREE SWINGING Full, 1/2, Half Overlay & Inset Salice Series 200 hinges are designed for use in both residential and commercial cabinets and have a Lifetime warranty Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants 200 Series 165 degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 9mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing and free swinging versions Series 200 hinges are designed to work with all Salice mounting plates described on pgs Series 200 hinges are compatible with the Smove soft-close devices illustrated on page Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Full Overlay D = (15 + K) - H 165 DEGREE 200 SERIES HINGE Screw-on Cup Press-in Dowel Cup Cam Lock Rapido Cup Tool Free Logica Cup 1/2 Overlay D = (10 + K) - H full overlay hinges 45mm Self-Closing UC2PFA99 UC2RFA99 UC27FA99 UC2JFA99 45mm Free Swinging UC2PEA99 UC2REA /2 overlay hinges 45mm Self-Closing UC2PFD99 UC2RFD99 UC27FD99 UC2JFD99 45mm Free Swinging UC2PED99 UC2RED half (3/8 ) overlay hinges 45mm Self-Closing UC2PFG99 UC2RFG99 UC27FG99 UC2JFG99 45mm Free Swinging UC2PEG99 UC2REG inset hinges 45mm Self-Closing UC2PFP99 UC2RFP99 - UC2JFP99 Half (3/8 ) Overlay D = (6 + K) - H 155 Zero Protrusion Hinge Note: This hinge will produce Zero door protrusion when used in a full overlay application only DEGREE ZERO PROTRUSION HINGE full overlay hinges Press-in Self-Closing UC2PMA99 UC2RMA99 Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY! Inset D = (-2 + K) - H

17 standard application hinges 165 degree heavy duty self-closing & free swinging Full & Half Overlay Grass 3000 Series hinges are ideal for store fixtures, office, high usage and other demanding applications All metal construction - moving parts are constructed of hardened steel for durability Accommodates overlays up to 22mm (7/8 ) and doors up to 22mm (7/8 ) thick Larger overlays up to 29mm (1-1/8 ) are possible when using the 135 degree restrictive clip Zero protrusion in full overlay applications - allows for pullouts without blocking Grass 3000 Series 165 opening hinges have: - Cup depths of 12.8mm - Hinge cup edge drilling distance of 3mm to 6mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Doweled for machine insertion Available in self-closing and free swinging versions 3000 Series hinges are designed to work with the Grass mounting plates on page -41 Packing: Hinges and cover caps come in full boxes of 50. Angle reduction clip comes in boxes of 100. Sold In: oth broken and full box quantities. Discount available for full box orders. Full ox Qty: 50 Full ox Qty: 50 FULL OVERLAY HINGES 42mm Self-Closing GF GF mm Free Swinging - GF Half Overlay Hinges 42mm Self-Closing GF GF angle Reduction clip degree Description ox Qty 135 Degree Angle Reduction Clip GF Hinge Adjustments 1 Side Adjustment...+/-2mm 2 Depth Adjustment...+2mm 3 Height Adjustment...+/-2mm Note: Use a POZI drive screwdriver for hinge adjustments. Fastening screws: #6 x 5/8 FHP Cover Caps Description ox Qty lack Cover Caps GF Full Overlay Half Overlay 800-UY-AER ( ) Fax:

18 standard application hinges 170 degree self-closing & free swinging Full & Half Overlay Grass Nexis and Nexis Impresso (tool-less cabinet door fastening design) hinges with 170 degree opening angle for wide angle applications in frameless and face frame cabinets Commonly used in corner or lazy susan applications along with a pie cut hinge Zero protrusion when opened at 90 degree excellent minimum gap and reveal Use with restrictive clip (described below) for special applications- lipped doors, and mitered corners Nexis 170 degree opening hinges have: - Cup depth of 11mm - Hinge cup edge drilling distance of 3mm to 10mm - Single screw side-to-side adjustment of +1mm to -3mm - patterns of 42mm and 45mm Available in three cup fastening designs: Screw-on with #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup. Tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing and free swinging versions Full Overlay Nexis hinges are compatible with soft-closing devices illustrated on page -48 to -49 Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Full box quantity of 50. NOTE: (*) SPECIAL ORDER Sold In: oth broken and full box quantities. Discount available for full box orders Full ox Qty: 50 Full ox Qty: 50 Tool-less (Impresso) Full ox Qty: 50 FULL OVERLAY HINGES 42mm Self-Closing GF GF mm Self-Closing - GF mm Free Swinging GF * /45mm Self-Closing - - GF /48mm Self-Closing 48mm Self-Closing - ME ME Half Overlay Hinges 42mm Self-Closing GF * GF mm Self-Closing - GF mm Free Swinging GF * /45mm Self-Closing - - GF /48mm Self-Closing - - ME mm Self-Closing - ME angle Reduction clip degree Description ox Qty Restricts opening angle for special applications GF ,500 Half Overlay - 18 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

19 standard application hinges 170 degree self-closing hinges Full Overlay Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a lifetime warranty Lama ST version hinges have +5, -1.5mm or depth adjustment via manually loosening an affixing screw on the hinge arm Lama ST series 170 degree hinges offers zero protrusion in the 90 and 165 degree opening angles when used with a 0mm plate Lama 170 degree opening hinges have: - Cup depth of 12mm - Hinge cup edge drilling distance of 3mm to 5mm - 45mm boring patterns - Three cup fastening designs: screw-on, knock-in 8mm doweled and Easy Fix three quarter turn expanding dowel See page -47 for Lama hinge mounting plates Packing: 50 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. Full Overlay Plate ST HINGES with manual screw depth adjustment Close Type Full ox Qty: 50 Full ox Qty: 50 Easy Fix Cup Full ox Qty: 50 Full overlay hinges 45mm Self-Closing TT248.0R TT248.0M TT248.0S X K Screw-on Dowel & Easy Fix D=Plate X = Desired overlay in MM D = Height of base plate in MM K = Hinge cup drilling distance For Wooden Doors 170 Degrees Adjustments Side Adjustment +3/-1mm Height Adjustment +2/-2mm Depth Adjustment +1.5/-1.5mm 800-UY-AER ( ) Fax:

20 specialty application hinges 94 DEGREE thick door hinges - up to 1-1/2 thick 40mm Hinge Cup - Full, Half Overlay & Inset Salice Series F thick door hinges are the perfect solution for overlay pocket doors Can be used for doors up to 1-1/2 (38mm) thick while maintaining minimal gaps between doors Large overlays possible: up to 1 3/8 (34mm) Exceeds ANSI/HMA grade 2 standards and is ISO 9001 and ISO (Environmental) certified Series F 94 degree opening thick door hinges have: - Cup depth of only 13mm - Hinge cup edge drilling distance of 3mm to 15mm - Patented parallel side-to-side adjustment of +5.5mm to -0.5mm via hinge arm screw Available in Screw-on via two #6 x 5/8 screws cup fastening design (screws not included) Available in self-closing and free swinging versions Series F hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Series F hinges are compatible with the Smove soft-close devices illustrated on pages -50 to -51 Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Full Overlay Full Overlay D = (19 + K) - H full overlay hinges 52mm Self-Closing UCFA7A99 52mm Free Swinging UCFA5A99 half (3/8 ) overlay hinges 52mm Self-Closing UCFA7G99 52mm Free Swinging UCFA5G99 inset hinges 52mm Self-Closing UCFA7P99 52mm Free Swinging UCFA5P99 Half (3/8 ) Overlay Half (3/8 ) Overlay D = (8 + K) - H Fabrication Note: To achieve the tightest gap possible between two doors, when using any Salice THICK DOOR hinge, it is recommended to also utilize the largest edge drilling distance and thickest mounting plate combination for the desired overlay. Please refer to Salice technical catalog for details. Inset Inset D = (-3 + K) - H - 20 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

21 specialty application hinges 94 & 155 DEGREE THICK DOOR HINGES - up to 1-1/4 thick 35mm Hinge Cup - Full, 1/2, Half Overlay & Inset Salice Series 200 thick door hinges are designed for use in both residential and commercial cabinets and have a Lifetime warranty Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants Suitable for doors up to 1-1/4 thick while maintaining minimal gaps between doors Large overlays possible: up to 24mm 200 Series 94 and 155 degree opening thick door opening hinges have: - Cup depths of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 9mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels 94 Series 200 Hinge Available in self-closing only Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Series 200 hinges are compatible with the Smove soft-close devices illustrated on pages -50 to -51 Packing: Full box quantity of 100. Sold in: oth broken and full box quantities. 155 Series 200 Hinge Discount available for full box orders. Full Overlay 1/2 Overlay D = (15 + K) - H D = (10 + K) - H 94 DEGREE hinge for thick doors Screw-on Cup Press-in full overlay hinges 45mm Self-Closing UC2PA99 UC2RA99 1/2 overlay hinges 45mm Self-Closing UC2PD99 UC2RD99 half (3/8 ) overlay hinges 45mm Self-Closing UC2PG99 UC2RG99 inset hinges 45mm Self-Closing UC2PP99 UC2RP DEGREE hinge for thick doors Screw-on Cup Press-in full overlay hinges 45mm Self-Closing UC2PDA99 UC2RDA99 1/2 overlay hinges 45mm Self-Closing UC2PDD99 UC2RDD99 half (3/8 ) overlay hinges 45mm Self-Closing UC2PDG99 UC2RDG99 Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Half (3/8 ) Overlay Inset D = (6 + K) - H D = (-2 + K) - H Fabrication Note: To achieve the smallest gap possible between two doors, when using any Salice THICK DOOR hinge, it is recommended to also utilize the largest edge drilling distance and thickest mounting plate combination for the desired overlay. Please refer to Salice technical catalog for details. 800-UY-AER ( ) Fax:

22 specialty application hinges 95 degree thick door hinges - Up to 1-3/16 Thick Full, Half Overlay & Inset Grass Nexis and Nexis Impresso (tool-less cabinet door fastening designs) hinges with 95 degree opening for thick doors or doors with applied mouldings and profiles are suitable for frameless and face frame applications For door thickness up to 30mm (1-3/16 ) and overlays up to 19mm (3/4 ) Nexis 95 degree opening thick door hinges have: - Cup depths of 11.8mm (Nexis) and 12mm (Nexis Impresso) - Hinge cup edge drilling distance of 3mm to 6mm - Single screw side-to-side adjustment of +1mm to -3mm - patterns of 42mm, 45mm and 48mm Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup. Tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing and free swinging versions Full Overlay Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Hinges come in full box quantities of 250 or 125 as shown below. Sold In: oth broken and full box quantities. Discount available for full box orders Full ox Qty: 250 Full ox Qty: 250 Tool-less (Impresso) Full ox Qty: 125 FULL OVERLAY HINGES 42mm Self-Closing GF GF mm Self-Closing ME GF /45mm Self-Closing - - GF mm Free Swinging GF mm Self-Closing ME ME Half Overlay Hinges 42mm Self-Closing GF GF mm Self-Closing - GF /45mm Self-Closing - - GF /48mm Self-Closing - - ME inset Hinges 42mm Self-Closing GF GF mm Self-Closing ME GF /45mm Self-Closing - - GF /48mm Self-Closing - - ME Half Overlay Inset Cover Caps Description ox Qty Steel, Nickel Plated - Full Overlay GF ,000 Steel, Nickel Plated - Half Overlay GF , Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

23 specialty application hinges 95 degree profile door hinges - up to 1-7/16 thick 40mm Cup for Profile Doors & Large Overlay Grass Nexis Hinges with 95 degree opening for thick doors or doors with applied mouldings and profiles are suitable for frameless and face frame applications Stamped steel arm and die-cast steel hinge cup with bright nickel finish Excellent weight capacity for heavy doors, special spring mechanism ensures excellent closing force with large doors Minimal gap dimensions on thick doors For door thickness up to 36mm (1-7/16 ) and overlays up to 23mm (7 / 8 ) Nexis hinges for profile and large overlay doors have: - Cup depths of 13.2mm - Hinge cup edge drilling distance of 3mm to 10mm - Single screw side-to-side adjustment of +1mm to -3mm - of 40mm Available in Screw-on with two #6 x 5/8 screws (not included), cup fastening design Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Hinges come in full box quantity of 125. Sold In: oth broken and full box quantities. Discount available for full box orders Full ox Qty: 125 FULL OVERLAY HINGES 40mm Self-Closing GF mm Cup Hole 110 DEGREE PROFILE DOOR HINGES Full Overlay, Half Overlay & Inset (Single Hinge For All 3 Applications) Salice Series 110 degree profile door hinges are designed to work with special profile cabinet doors and are ideal for 3/8 lip doors, miter doors and radius edge doors Series hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance is permanently self lubricating utilizing environmentally safe lubricants and has a lifetime warranty Series 110 degree profile door hinges have: - Cup depth of only 9mm making the hinge compatible with most narrow door profiles - Hinge cup edge drilling distance of 3mm to 18mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in Screw-on with two #6 x 5/8 screws (not included) cup fastening design Available in self-closing only Series hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Series hinges are compatible with Smove soft-close devices on pages -50 to -51 Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. inset to FULL OVERLAY HINGES 35mm Self-Closing UCP2A99 Series Applications - Special Profile Doors 800-UY-AER ( ) Fax:

24 specialty application hinges 95 degree blind corner hinges Post Hinge for lind Corner Cabinets Grass Nexis Impresso hinges with 95 degree opening angle for blind corner applications are suitable frameless and face frame applications Zinc die cast arm and stamped steel cup with bright nickel finish Minimal gap dimensions on door thickness of up to 30mm ( 1-13/16 ) Nexis 95 degree opening blind corner hinges have: - Cup depths of 11.8mm - Hinge cup edge drilling distance of 3mm to 6mm - Single screw side-to-side adjustment of +1mm to -3mm - pattern of 45mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Doweled Available in self-closing only Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Nexis hinges are designed to work with the Grass mounting plates on pages -39 to -41 Packing: Hinges come in full box quantities of 125. Sold In: oth broken and full box quantities. Discount available for full box orders Installation Dimensions Clearances Full ox Qty: 125 Full ox Qty: 125 inset HINGES 45mm Self-Closing GF GF degree heavy duty/commerical blind corner hinges lind Corner Hinges Grass 3000 Series heavy duty/commercial application, blind corner hinges are designed for flush blind corner applications Door thickness: 16mm (5/8 ) to 22mm (7/8 ) depending on reveal and shape of door. For flush front, door and end panel must be the same thickness Grass 3000 Series blind corner hinges have: - Cup depths of 12.8mm - Hinge cup edge drilling distance of 3mm to 6mm - Three dimensional cam adjustment built into the hinge arm, providing +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 (not included) and Doweled Must be used with GF listed below Packing: Full box quantities of 50. Sold In: oth broken and full box quantities. Discount available for full box orders Full ox Qty: 50 Full ox Qty: 50 blind corner hinges 42mm Self-Closing GF GF SCREW-ON ase plates ox Qty GF Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

25 specialty application hinges blind corner hinge Inset Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a lifetime warranty Lama ST version hinges have +/-1.5mm of depth adjustment via manually loosening an affixing screw Lama blind corner hinges have: - Cup depth of 11.5mm - Hinge cup edge drilling distance of 3mm to 6mm - 45mm boring patterns - Two cup fastening designs: screw-on and knock-in 8mm doweled See page -47 for Lama hinge mounting plates Packing: 100 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. Screw-on Knock-on Doweled ST inset HINGES with manual screw depth adjustment Close Type Full ox Qty: 100 Full ox Qty: 100 Full overlay hinges 45mm Self-Closing TT TT248.0N pie cut corner hinge Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a lifetime warranty Lama ST+ version hinges have +/-1.5mm of depth adjustment via a cam on the hinge arm Lama pie cut corner hinges have: - Cup depth of 11.5mm - Hinge cup edge drilling distance of 3mm to 6mm - 45mm boring patterns - Two cup fastening designs: screw-on and knock-in 8mm doweled See page -47 for Lama hinge mounting plates Packing: 100 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. ST inset HINGES with manual screw depth adjustment Close Type Full ox Qty: 100 Full ox Qty: 100 Full overlay hinges 45mm Self-Closing TT248.0U TT248.0U UY-AER ( ) Fax:

26 specialty application hinges pie cut corner hinges Grass America s Nexis & Nexis Impresso (tool-less) pie cut corner hinges are designed to be used in corner cabinet and lazy susan applications Use in conjunction with Nexis 170 opening degree hinges For door thickness of 16mm to 22mm Two distinct designs part numbers GF & GF feature full cup recess which enables user to bore all 4 hinge holes in door with same dimensions and spacing Full cup recess design adds additional adjustment point for door thickness Nexis pie cut corner hinges have: - Cup depths of 10.8mm - Single screw side-to-side adjustment of +1mm to -3mm - of 42mm and 45mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Doweled Available in self-closing only Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Full box quantities of 125. Sold In: oth broken and full box quantities. Discount available for full box orders. pie cut corner HINGES Full ox Qty: 125 Full ox Qty: mm Self-Closing GFNX21VZ-PCC GFNX21V28-PCC 45mm Self-Closing GF GF pie cut corner hinges - full cup recess 48mm Self-Closing GF GF Pie Cut Corner Hinge Pie Cut with Full Cup Recess Adjustable in the hinge arm 1. Side adjustment +2mm 2. Depth adjustment +2mm 4. Door thickness 14 to 24mm,factory setting 19mm Adjustment via base plate 3. Height adjustment +2mm Pie Cut Hinge with Full Cup Recess pie cut corner hinges Free Swinging Pie Cut Corner Kit Universal design free swing pie cut corner hinge kit includes two hinges, magnetic catch and strike plate Requires a 35mm hole in both door panels- can use any pattern boring machine or drill press Good alternative to non-adjustable and troublesome piano or continuous hinges Used in conjunction with any wide angle hinge Requires #6 x 5/8 screws to mount hinge, and #4 x5/8 screws for catch Sturdy all die-cast construction bright Nickel finish shallow profile will not interfere with lazy susans Adjustable accommodates doors 16mm ( 5/8 ) to 25mm (1 ) in thickness Gap between doors can easily be adjusted height adjustable as well Packing: Poly bag contains two hinges, 1 magnetic catch and 1 striker plate. 50 polybags per box. Sold In: oth broken and full box quantities. Discount available for full box orders. GF Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

27 specialty application hinges positive & negative angle hinges +/-30 Degree, +/-45 Degree, lind & Pie Cut Corner Hinges Series 200 positive and negative angle hinges are designed for use in both residential and commercial cabinets Series 200 hinges exceed ANSI/HMA Grade 2 standards and meet ISO9001 and ISO14001 environmental certifications All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants Series 200 positive and negative degree opening hinges have: - Cup depth of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Available in self-closing only Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Series 200 hinges are compatible with the Smove soft-close devices illustrated on page -50 to -51 Packing: Full box quantity of 150. Sold in: oth broken and full box quantities. Discount available for 50 hinges and full box orders. Positive 30 Angle Press-in Cam Lock Rapido Cup Tool Free Logica Cup Positive 30 degree Angle 45mm Self-closing UC2P7E99 UC2R7E99 UC277E99 UC2J7E99 Negative 30 degree Angle 45mm Self-closing UC2P7W99 UC2R7W99 UC277W99 UC2J7W99 Positive 45 degree Angle 45mm Self-closing UC2P7M99AC UC2R7M99AC UC277M99AC UC2J7M99AC Negative 45 degree Angle 45mm Self-closing UC2P7H99 UC2R7H99 UC277H99 UC2J7H99 lind Corner 45mm Self-closing UC2P7N99AC UC2R7N99AC UC277N99AC UC2J7N99AC overlay blind corner 45mm Self-closing UC2P6N99AM UC2R6N99AM UC2J6N99AM pie cut corner 45mm Self-closing UC2PYA99 UC2RYA99 UC27YA99 - Negative 30 Angle Positive 45 Angle Negative 45 Angle lind Corner Overlay lind Corner Pie Corner Hinge 800-UY-AER ( ) Fax:

28 specialty application hinges positive & negative angle hinges -15 Degree, +30 Degree & +/-45 Degree Hinges Lama hinges from Titus are manufactured in Europe and are economically priced Lama hinges are ANSI/IFMA tested and have a Lifetime warranty Lama ST version hinges have +/-1.5mm of depth adjustment via manually loosening an affixing screw Lama positive and negative angle hinges have: - Cup depth of 11.5mm Screw-on - Hinge cup edge drilling distance of 3mm to 6mm - 45mm boring patterns - Two cup fastening designs: screw-on and knock-in 8mm doweled See page -47 for Lama hinge mounting plates Packing: 100 hinges per box. Sold In: oth broken and full box quantities. Discount available for full box orders. Doweled & Easy Fix ST inset HINGES - (+30 degree) Close Type Full ox Qty: 200 Full ox Qty: 100 Full overlay hinges 45mm Self-Closing - TT248.0U Degree 3mm Mounting Plate ST inset HINGES - (+45 degree) Close Type Full ox Qty: 100 Full ox Qty: 100 Full overlay hinges 45mm Self-Closing TT TT248.0N Degree 3mm Mounting Plate ST overlay HINGES - (+45 degree) Close Type Full ox Qty: 200 Full ox Qty: 200 Full overlay hinges 45mm Self-Closing - TT248.0N ST inset HINGES - (-15 degree overlay) Close Type Full ox Qty: 100 Full ox Qty: 200 Full overlay hinges 45mm Self-Closing TT248.0V Degree 0mm Mounting Plate - 28 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

29 specialty application hinges positive & negative angle hinges +30 Degree and -/+45 Degree Grass America s Nexis & Nexis Impresso (tool-less cabinet door fastening design) angled hinges are designed for frameless and face frame cabinets Nexis positive and negative angle hinges have: - Cup depths of 11.8mm (Nexis) and 12mm (Nexis Impresso) - Hinge cup edge drilling distance of 3mm to 6mm - Single screw side-to-side adjustment of +1mm to -3mm - pattern of 45mm and 48mm Positive angle hinges can be used with doors up to 30mm (1-3/16 ) thick, negative angle hinges can be used with doors up to 19mm (3/4 ) thick Available in three cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Doweled and Tool-less Impresso Screw-on and Doweled hinges feature stamped steel cup. Tool-less Impresso hinges feature die-cast steel cup and closing flap with all metal construction for positive and secure attachment to cabinet door Available in self-closing only Nexis hinges are compatible with the soft-close devices illustrated on page -48 to -49 Nexis hinges are designed to work with the mounting plates on pages -39 to -41 Packing: Full box quantity of 125. Sold In: oth broken and full box quantities. Discount available for full box orders. Full ox Qty: 125 Full ox Qty: 125 Tool-less (Impresso) Full ox Qty: 125 positive 30 degree angle corner hinges 48mm Self-Closing GF negative 45 degree angle corner hinges 45mm Self-Closing GF GF /48mm Self-Closing - - GF positive 45 degree angle corner hinges 45mm Self-Closing GF GF /48mm Self-Closing - - GF Degree Hinge - 45 Degree Hinge +30 Degree Hinge 800-UY-AER ( ) Fax:

30 specialty application hinges 95 degree specialty application hinge Positive & Negative 45 Degree Angle Hinges For Heavy Duty Applications Grass 3000 Series, positive and negative 45 degree angle hinges are designed for heavy duty +/- 45 degree corner applications For use with doors 5/8 to 7/8 thick Grass 3000 Series positive and negative 45 degree angle hinges have: - Cup depths of 12.8mm - Hinge cup edge drilling distance of 3mm to 5mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment - pattern of 42mm Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Doweled for machine insertion 3000 Series hinges are designed to work with the mounting plates on -42 Available in self-closing versions Packing: Full box quantity of 50. Sold In: oth broken and full box quantities. Discount available for full box orders. Full ox Qty: 50 Full ox Qty: 50 positive 45 degree angle hinge 42mm Self-Closing GF GF negative 45 degree angle hinge 42mm Self-Closing GF GF Positive 45 Degree Angle Hinge Negative 45 Degree Angle Hinge 100 degree glass door hinge Glass Door Hinge Grass 3000 Series, glass door hinge can reduce glass door installation time by 50% and is designed to reduce stress on glass at point of attachment For glass thicknesses from 1/8 to 9/32, maximum glass thickness for tempered glass is 5/32 Requires 30mm diameter hole in glass, 7/32 to 1/4 from edge Order cover plate separately Maximum door overlay is 3/4 Grass 3000 Series glass door hinges have: - Hinge cup edge drilling distance of 3mm to 6mm - Three dimensional adjustment built into hinge arm provides +/-2mm side-to-side, depth and height adjustment 3000 Series hinges are designed to work with the mounting plates on -40 Available in self-closing versions Packing: Full box quantity of 50. NOTE: (*) SPECIAL ORDER Sold In: oth broken and full box quantities. Discount available for full box orders Full ox Qty: 300 FULL OVERLAY Self-Closing GF HALF OVERLAY Self-Closing Coverplates - round Description lack, Plastic GF * Polished Nickel GF * Würth aer GF3505GT Supply Company Over 40,000 products in-stock EVERYDAY!

31 specialty application hinges 110 & 165 DEGREE, push to open self-opening hinges Full, Half Overlay & Inset Salice Series 200 self-opening/push to open hinge is a hinge that contains a special reverse spring which enables the door to open automatically once a small amount of pressure is applied to the door The pressure to the door activates a release device (see next page -32 for Salice release devices) at which point the hinge takes over and opens the door completely The release device serves to hold the door in the closed position as well as to release the door There are two types of release devices: mechanical and magnetic (described on the next page) 200 Series 110 and 165 degree push to open hinges have: - Cup depths of only 11mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 9mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in Screw-on with two #6 x 5/8 screws (not included) and press-in dowel cup fastening designs Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: 110 degree hinges have full box quantity of degree hinges have a full box quantity of 100. Sold in: oth broken and full box quantities. Discount available for full box orders. Full Overlay D = (15 + K) - H Half (3/8 ) Overlay D = (6 + K) - H 110 degree PUSH HINGE-Self-opening Press-in Dowel Cup full overlay 45mm Self-Opening UC2PPA99 UC2RPA99 Half (3/8 ) overlay 45mm Self-Opening UC2PPG99 UC2RPG99 inset 45mm Self-Opening UC2PP99 UC2RPP Push Hinge 165 Push Hinge Inset D = (-2 + K) - H 165 degree PUSH HINGE - Self-opening Press-in Dowel Cup full overlay 45mm Self-Opening UC2PSA99 UC2RSA99 Half (3/8 ) overlay 45mm Self-Opening UC2PSG99 UC2RSG99 inset 45mm Self-Opening UC2PSP99 UC2RSP99 Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = UY-AER ( ) Fax:

32 specialty application hinges PUSH HINGE, LATCHES & Catches Mechanical & Magnetic Catches For Use With Salice Push To Open Hinges These mechanical and magnetic push latches and catches are specifically designed to work in conjunction with Salice Push Hinges illustrated on preceding pages Mechanical Push Latch/Catch: - The adjustable push latch is made of a screw-affixed adapter housing and separate catch device (see illustrations below) - The push latch adapter has -1mm to +2.5mm of depth adjustment controlled by a small hand turned adjuster wheel at the back of the housing - The push latch adapter has +/-2mm left-to-right adjustment via elongated fixing screw hole - Push catches come in two styles: surface mounted or recessed 26mm diameter x 8mm deep catch Magnetic Push Latch with Strike Plate: - Push latch can be recess mounted by inserting latch into a 10mm diameter x 40mm long bore hole - Push latch can also be installed via an optional surface mounted hand adjustable (+/-2mm front-to-back adjustment) adapter - Magnetic push latch comes with strike plate Packing: Mechanical push latches are full box quantity of 300 and magnetic latches are full box quantity of 250. Sold in: oth broken and full box quantities. Discount available for full box orders. MECHANICAL PUSH LATCH, RECESSED (box qty: 300) Finish Latch Item # Recessed Catch Item # Surface Mount Catch Item # eige UDP4SN UDP29SN UDP29SNR Gray UDP4SNG UDP29SNG UDP29SNGR lack UDP4SN3 UDP29SN3 UDP29SNG3R MECHANICAL LATCH ASSEMLY: RECESSED magnetic push latch (box Qty: 250) Magnet & Strike eige Surface Mount Housing UDPM289 UDP84SNR MAGNETIC LATCH ASSEMLY Surface Mount Recessed Mount - 32 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

33 integrated soft-close hinges 105 DEGREE SHALLOW CUP INTEGRATED SOFT-CLOSE HINGE Full Overlay, 1/2 Overlay & Half Overlay Silentia Series 100 shallow cup hinges with integrated soft-close feature are designed for thin door profiles Integrated soft close mechanism is fully integrated within the hinge cup All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants Silentia Series 100 shallow cup soft-close hinges have: - Cup depth of only 12mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels, Series 100 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Hinges come in full box quantity of 300. Silentia accessories are packaged as shown below. Sold in: oth broken and full box quantities. Discount available for full box orders. Hinge cup depth must be bored 12.0mm deep. full overlay Press-in 45mm Soft Closing UC1P6AD9 UC1R6AD9 1/2 overlay 45mm Soft Closing UC1P6DD9 UC1R6DD9 half (3/8 ) overlay 45mm Soft Closing UC1P6GD9 UC1R6GD9 silentia accessories Description ox Qty Hinge Cup Depth Gauges 12mm Silentia hinge cup depth gauge UD1A6ACGSN 1 Silentia Hinge Spacers.6mm spacer for 105 to 110 degree hinge US2XX86T 1, mm spacer for 105 to 110 degree hinge US2XX86AT 1, mm spacer for 105 to 110 degree hinge US2XX86KT 1,200.6mm spacer for 155 degree hinge USXF86XT 1, mm spacer for 155 degee hinge US2XF86AT 1, mm spacer for 155 degree hinge US2XF86KT 1,200 Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 100 Silentia hinges, use the 12mm depth gauge item #UD1A6ACGSN on page -54. Full Overlay D = (15 + K) - H Silentia Hinge Spacers Silentia spacers can be used under the hinge cup flange if the correct drilling depth cannot be achieved due to door thickness or door profile. Spacers are available in thickness of.6mm, 1.2mm and 1.8mm. Refer to page -54 to make a selection. Spacers cannot be used with Logica, tool-free hinges. 1/2 Overlay D = (10 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = -2 Half (3/8 ) Overlay D = (6 + K) - H 800-UY-AER ( ) Fax:

34 integrated soft-close hinges 110 DEGREE integrated soft-close hinge Full, 1/2, 3/8 Overlay & Inset Silentia Series 700 hinges are the original cabinet hinge with integrated soft close feature designed for use in both residential and commercial cabinets where soft close action is desired The soft-close mechanism is completely hidden from view within the hinge cup Series 700 integrated soft-close hinges have: - Cup depth of only 13.5mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 6mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in four cup fastening designs: Screw-on with two #6 x 5/8 screws (not included), Press-in dowels, Rapido cam lock dowel and Logica tool free lever activated expanding dowels Series 700 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Full box quantity of 300. Sold in: oth broken and full box quantities. Discount available for full box orders. Hinge cup depth must be bored 13.5mm deep Press-in Cam Lock Rapido Cup Tool Free Logica Cup FULL OVERLAY HINGES 45mm Soft-Closing UC7P6AD9 UC7R6AD9 UC776AD9 UC7J6AD9 1/2 Overlay Hinges 45mm Soft-Closing UC7P6DD9 UC7R6DD9 UC776DD9 UC7J6DD9 HALF (3/8 ) Overlay Hinges 45mm Soft-Closing UC7P6GD9 UC7R6GD9 UC776GD9 UC7J6GD9 inset Hinges 45mm Soft-Closing UC7P6PD9 UC7R6PD9 UC776PD9 UC7J6PD9 Full Overlay D = (15 + K) - H 1/2 Overlay D = (10 + K) - H Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 700 Silentia hinges, use the 13.5mm depth gauge item #UD7A6AC1SN on page -54. Silentia Hinge Spacers Silentia spacers can be used under the hinge cup flange if the correct drilling depth cannot be achieved due to door thickness or door profile. Spacers are available in thickness of.6mm, 1.2mm and 1.8mm. Refer to page -54 to make a selection. Spacers cannot be used with Logica, toolfree hinges. Half (3/8 ) Overlay D = (6 + K) - H Inset D = (-2 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

35 integrated soft-close hinges 155 DEGREE INTEGRATED SOFT-CLOSE HINGE Full Overlay, 1/2 Overlay & Half Overlay Silentia Series 200 hinges is the original cabinet hinge with integrated soft close feature The soft-close mechanism is completely hidden from view within the hinge cup Series 200 Silentia hinges are designed for use in both residential and commercial cabinets where soft close action is desired Series 200 thick door soft-close hinges have: - Cup depth of 13.5mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 8mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels, Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Full box quantity of 100. Sold in: oth broken and full box quantities. Discount available for full box orders. Press-in Dowel Cup FULL OVERLAY HINGES 45mm Soft-Closing UC2PMAD9 UC2RMAD9 1/2 Overlay Hinges 45mm Soft-Closing UC2PMDD9 UC2RMDD9 Half (3/8 ) Overlay Hinges 45mm Soft-Closing UC2PMGD9 UC2RMGD9 Full Overlay D = (15 + K) - H 1/2 Overlay D = (10 + K) - H Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 700 Silentia hinges, use the 13.5mm depth gauge item #UD7A6ACYSN described on page -54. Hinge cup depth must be bored 13.5mm deep Silentia Hinge Spacers Silentia spacers can be used under the hinge cup flange if the correct drilling depth cannot be achieved due to door thickness or door profile. Spacers are available in thickness of.6mm, 1.2mm and 1.8mm. Refer to page -54 to make a selection. Spacers cannot be used with Logica, tool-free hinges. Half (3/8 ) Overlay D = (6 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = UY-AER ( ) Fax:

36 integrated soft-close hinges 94 & 155 degree thick door integrated soft-close hinge Full Overlay, 1/2 Overlay, Half Overlay & Inset Silentia Series 200 hinges are the original cabinet hinge with a soft close mechanism fully integrated within the hinge cup The soft-close mechanism is completely hidden from view within the hinge cup Suitable for doors up to 1-1/4 thick while maintaining minimal gaps between doors Large overlays possible: up to 24mm All steel hinge is nickel plated for corrosion resistance and is permanently self lubricating utilizing environmentally safe lubricants Hinge cup depth must Silentia Series 200 thick door soft-close hinges have: be bored 15.5mm deep - Cup depth of 15.5mm - Hinge cup edge drilling distance of 3mm to 9mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels Series 200 hinges are designed to work with all Salice mounting plates described on pages -44 to -46 Packing: Full box quantity of 100 hinges for 155 degree hinges and full box quantity of 300 hinges for 94 degree hinges. Sold in: oth broken and full box quantities. Discount available for full box orders. 94 degree hinge for thick doors Screw-on Cup Press-in full overlay 45mm Soft-Closing UC2PAD9 UC2RAD9 1/2 overlay 45mm Soft-Closing UC2PDD9 UC2RDD9 half (3/8 ) overlay 45mm Soft-Closing UC2PGD9 UC2RGD9 inset 45mm Soft-Closing UC2PPD9 UC2RPD9 155 degree hinge for thick doors Screw-on Cup Press-in full overlay 45mm Soft-Closing UC2PDAD9 UC2RDAD9 1/2 overlay 45mm Soft-Closing UC2PDDD9 UC2RDDD9 half (3/8 )overlay 45mm Soft-Closing UC2PDGD9 UC2RDGD9 Full Overlay D = (15 + K) - H 1/2 Overlay D = (10 + K) - H Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 200 thick door Silentia hinges, use the 15.5mm depth gauge item #UD2A6AC3SN on page -54. Half (3/8 ) Overlay D = (6 + K) - H Inset D = (-2 + K) - H Key: S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcase H = Height of mounting plate G = Hinge constant - Full overlay = 15 1/2 overlay = 10 Half (3/8 ) overlay = 6 Inset = Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

37 integrated soft-close hinges Positive 45 degree Angle & lind Corner Integrated soft-close hinge Silentia Series 700 positive and negative angle hinges are designed for use in both residential and commercial cabinets The soft-close mechanism is completely hidden from view within the hinge cup Silentia Series 700 positive and negative degree opening soft close hinges have: - Cup depth of 13.5mm making the hinge compatible with most cabinet door profiles - Hinge cup edge drilling distance of 3mm to 8mm - Patented parallel side-to-side adjustment of +4.5mm to -1.5mm via hinge arm screw Available in two cup fastening designs: Screw-on with two #6 x 5/8 screws (not included) and Press-in dowels Series 700 hinges are designed to work with all Salice mounting plates described on pages -42 to -44 Packing: Full box quantity of 150. Sold in: oth broken and full box quantities. Discount available for full box orders. Press-in positive 45 degree Angle - open side 45mm Soft-Closing UC7P6MD9 UC7R6MD9 positive 45 degree angle - adjoining door application 45mm Soft-Closing UC7P6MD9AC UC7R6MD9AC blind corner 45mm Soft-Closing UC7P6ND9AC UC7R6ND9AC overlay blind corner 45mm Soft-Closing UC7P6ND9AM UC7R6ND9AM Hinge Cup Depth Gauges To insure the correct hinge cup boring depth is achieved, always use the Silentia cup depth gauge during the initial set up of your drilling machine. For Series 700 Silentia angle hinges, use the 13.5mm depth gauge item #UD7A6ACYSN on page -54. Hinge cup depth must be bored 13.5mm deep Positive 45 Angle Open Side Positive 45 Angle Adjoining lind Corner Overlay lind Corner 800-UY-AER ( ) Fax:

38 Miscellaneous hinges Surface Mounted Hinges Fully Concealed Allows you to achieve the clean European look without any boring in the cabinet door For use on overlay or flush doors in non-face frame installations Elongated screw holes make these hinges fully adjustable Packing: 50 each per box without screws. Description Sold In: oth broken and full box quantities. Discount available for full box orders. IMCS1-R Self Locking IMCS1A-R Free Swinging Miter Hinge, Screw Mounted 135 Degree Opening 135 degree opening, free swinging, nickel plated miter hinge designed for the door and cabinet edges to meet at 45 degrees For doors and side panels from 16mm (5/8 ) to 22mm (7/8 ) thickness Adjustable vertically (+/-3.0mm), laterally (+1/-1.5mm) and front to back (+1/-1.5mm) Specifications: - Cup Diameter: oth cups 35mm (1-3/8 ) - ore Center from edge of door: 7mm (9/32 ) - Cup Insertion Depth: 13.5mm (17/32 ) - Door Thickness: 16mm (5/8 ) to 22mm (7/8 ) Packing: 20 each per box without screws. Sold In: oth broken and full box quantities. Discount available for full box orders. HE Fascia Hinges 35mm Cup Hinge is designed to mount hinge fascia or for connecting two door sections on folding/sliding doors Integrated spring system keeps the door closed in a 90 degree position and keeps the fascia aligned with the door Requires a 35mm cup hole in the back of the flap Nickel plated die-cast zinc Packing: 50 per box without screws. Sold In: oth broken and full box quantities. Discount available for full box orders. HT Finish Nickel-Plated - 38 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

39 base plates grass nexis face frame adapter base plates Slotted Hole & Two Cam Adjustment Nexis face frame adapter plates are made of die-cast steel and affix to hinge via clip on design Face frame adapter plate Style A provides +/-2mm of height adjustment via elongated screw holes Face frame adapter plate Styles and C have two cams and provide +/-2mm of cam height adjustment and +3/-1mm of cam depth adjustment Styles A & attach to cabinet side via #6 x 5/8 flat head screws (see pages -53 for screws), Style C attaches to cabinet side via pre-mounted wood screws and Style D attaches with #6 x 3/4 pan head screws A Packing: Full box quantity of 250 base plates. Sold In: oth broken and full box quantities. Discount available for full box orders Height-adjustable Height adjustment via elongated hole Plate Height ox Qty economy slotted hole height adjustment DIECAST, WOOD SCREW MOUNTING A GF mm 250 GF mm 250 dual cam adjustment-height & depth DIECAST, OPEN HOLE WOOD SCREW ATTACHMENT GF mm 250 GF mm 250 GF mm 250 DIECAST, PRE-ATTACHED WOOD SCREWS C GF mm 250 GF mm 250 GF mm 250 FLUSH inset/beaded inset - for use with half overlay hinge arm D DIECAST/STEEL, WOOD SCREW MOUNTING GF mm 250 Height-adjustable Depth-adjustable C Height-adjustable D Height-adjustable Depth-adjustable Height and depth adjustment via eccentric cam Desired Door Gap Drilling Distance for Hinge Cup 1/8 1/8 3/32 5/32 1/16 3/16 grass nexis series - base plate height selection Frameless or Face Frame ase Plate Guidelines ase Plate Height door overlay table 5/32 3/16 1/4 9/32 5/16 11/32 3/8 7/16 15/32 1/2 9/16 19/32 5/8 21/32 11/16 3/4 25/ Half Overlay Hinges Full Overlay Hinges Drilling Distance DD 1/8 5/32 3/16 1/4 800-UY-AER ( ) Fax:

40 base plates grass nexis frameless cabinet base plates Slotted Hole & Single Cam Height Adjustable ase Plates Grass Nexis base plates are constructed of economy stamped steel or high grade die-cast steel and affix to hinge via clip on design Available in two cabinet side fixing styles: two point or three point All base plates have +/-2mm of height adjustment Available in open hole (to accommodate wood or Euro screws) or pre-mounted Euro screw models Attach with #6 x 5/8 flat head screws, see page -53 for screws Packing: Full box quantity of 250 base plates. Sold In: oth broken and full box quantities. Discount available for full box orders. 2 point fixing Economy stamped steel plate with slotted screw hole height adjustment Plate Height Open Hole for Wood Screws With Pre-mounted Euro Screws 0mm GF GF mm GF GF mm GF GF POINT FIXING STAMPED STEEL SLOTTED HOLE Slotted hole height-adjustable Slotted hole height-adjustable Plate Height 3 point fixing die-cast one screw height adjustment Open Hole for Wood Screws Open Hole for Euro Screws 0mm GF GF mm GF GF mm GF mm GF GF mm GF GF POINT FIXING DIE-CAST HEIGHT ADJUSTALE Cam height-adjustable 2 point fixing stamped steel one cam height adjustment Plate Height Open Hole for Wood Screws With Pre-mounted Euro Screws 0mm GF GF mm GF GF POINT FIXING CAM HEIGHT ADJUSTALE Cam height-adjustable Cam height-adjustable Height and depth adjustment via eccentric cam - 40 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

41 base plates grass nexis frameless base plates Two Cam Height & Depth Adjustment ase Plates Grass Nexis two cam adjustment base plates offer +/-2mm of cam height adjustment and +3mm/-1mm of cam depth adjustment Hinge affixes to plate via clip on design Nexis base plates are available in two cabinet side affixing methods: open hole for #6 size wood screws and with pre-mounted Euro screws Nexis base plates come in two point fixing or three point fixing versions Nexis two cam adjustment base plates are available in 0mm through 8mm heights Attach with #6 x 5/8 flat head screws, see page -53 for screws Packing: Full box quantity of 250 base plates. Sold In: oth broken and full box quantities. Discount available for full box orders Plate Height Open Hole for Wood Screws 2 point fixing 3 point fixing With Pre-mounted Euro Screws Open Hole for Wood Screws With Pre-mounted Euro Screws 0mm GF GF GF GF mm GF GF GF GF mm GF GF GF GF mm GF GF mm GF GF GF GF Cam height adjustable Cam depth adjustable 2-POINT FIXING OPEN HOLE FOR WOOD SCREWS Cam height adjustable Cam depth adjustable 2-POINT FIXING WITH PRE-MOUNTED EURO SCREWS 37 Cam height adjustable Cam depth adjustable 3-POINT FIXING OPEN HOLE FOR WOOD SCREWS Cam height adjustable Cam depth adjustable 3-POINT FIXING WITH PRE-MOUNTED EURO SCREWS 800-UY-AER ( ) Fax:

42 base plates grass 3000 series base plates For Use With All 3000 Series Die-cast base plates for the Grass 3000 series of hinges are constructed of die-cast steel Wing base plates available in screw-on, Euro screw, or pre-mounted Euro screw Additional screw holes provided in winged base plates for demanding applications For maximum holding power use all available screw holes Packing: Full box quantity of 50 base plates. Sold In: oth broken and full box quantities. Discount available for full box orders. Plate Height wing base plates for frameless Applications Wood Screw Attachment Euro Screw Attachment Pre-Mounted Euro Screw Attachment 1.3mm GF GF GF mm GF GF GF mm GF GF GF mm GF GF mm GF GF FRAMELESS WING PLATES Wood Screw Attachment Euro Screw Attachment FRAMELESS WING PLATES Plate Height straight base plates Wood Screw Attachment Dowel Attachment 1.3mm GF GF mm GF mm - GF face frame adapter plates Plate Height Diecast with Locating Tabs Diecast with Lip 2.6mm - GF mm GF mm GF Pre-Mounted Euro Screw inset application face frame adapter plate - attach with #6 x 3/4 FHP screws die-cast with locating flange - use 1.3 plate with half overlay hinges Plate Height 1.3mm 4.3mm GF GF base plates spacer wedge degree INSET FACE FRAME - GF38314 Face Frame Adapter Plate Diecast with Locating Tabs FACE FRAME ADAPTER PLATES Face Frame Adapter Plate Diecast with Lip - 42 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

43 base plates SALICE MOUNTING PLATE SELECTION GUIDE FRAMELESS CAINETS: Using 4mm (5/32 ) TA Distance Mounting Plate Choices 0mm Mounting Plate 2mm Mounting Plate 3mm Mounting Plate 6mm Mounting Plate 9mm Mounting Plate 12mm Mounting Plate 18mm Mounting Plate Hinge Choices Full Overlay Hinge 1/2 Overlay Hinge Half Overlay Hinge Inset Hinge A D G P 3/4 Overlay (19mm) 11/16 Overlay (17mm) 5/8 Overlay (16mm) 1/2 Overlay (12.5mm) 3/8 Overlay (10mm) 1/4 Overlay (6mm) Inset Door (Plus Adjustment) 9/16 Overlay (14mm) 1/2 Overlay (12.5mm) 7/16 Overlay (11mm) 5/16 Overlay (8mm) 3/16 Overlay (5mm) (Plus Adjustment) 3/32 Overlay (2mm) (Plus Adjustment) 3/8 Overlay (10mm) 5/16 Overlay (7mm) 1/4 Overlay (6mm) (Plus Adjustment) 5/32 Overlay (4mm) Inset Door (Plus Adjustment) - Inset Door (Plus Adjustment) Inset Door Inset Door Desired Overlay FACE FRAME CAINETS: Using 4mm (5/32 ) TA Distance Mounting Plate Choices 1mm Face Frame Mounting Plate 4mm Face Frame Mounting Plate AL3R59 Mounting Plate AM3R09 Mounting Plate Hinge Choices Full Overlay Hinge 1/2 Overlay Hinge Half Overlay Hinge Inset Hinge A D G P 3/4 Overlay (19mm) 9/16 Overlay (15mm) - 1-1/4 Overlay (32mm) (Use 6mm Tab (K)) 1/2 Overlay (12.5mm) 3/8 Overlay (10mm) Inset Door (Use 3mm Tab) 3/8 Overlay (10mm) 5/16 Overlay (7mm) 1/4 Overlay (6mm) 5/16 Overlay (5mm Tab) Inset Door Desired Overlay For a precise overlay calculation, you can use these formulas Full Overlay D = (15 + K) - H Half Overlay D = (6 + K) - H 1/2 Overlay D = (10 + K) - H Inset D = (-2 + K) - H Where: D = Desired Overlay K = Edge Distance H = Mounting Plate Height A = Gap 800-UY-AER ( ) Fax:

44 face frame base plates salice face frame adapter mounting plates Single Cam Depth & Two Cam Height & Depth Adjustment Constructed of stamped steel or die-cast steel with nickel plating to resist corrosion Single cam plates provide -0.5mm to +2.8mm cam depth adjustment and +/-2mm of manual elongated screw hole height adjustment Two cam plates provide 0.5mm to +2.8mm cam depth adjustment and +/-2mm cam height adjustment Available in 0mm to 4mm thickness for overlay applications and 5mm thickness for inset applications Lifetime warranty Packing: 50 each per box. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height stamped steel A Adjustment Application 1mm Single Cam Overlay UAU3L19 4mm Single Cam Overlay UAU3L49 die-cast steel C 1mm Single Cam Overlay UAU3E19 4mm Single Cam Overlay UAU3E49 1mm Two Cam Overlay UAU3R19 4mm Two Cam Overlay UAU3R49 D 0mm Two Cam Large Overlay UAM3R09 E 5mm Two Cam Inset UAL3R59 A Overlay Single Cam Stamped Steel Overlay Single Cam D Large Overlay - 2 Cam C Overlay - 2 Cam E Inset 2-Cam For inset doors, use mounting plate AL3R59 and any half overlay ( G ) or 1/2 overlay ( D ) hinge type Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

45 base plates economy SLIDE-ON mounting plates Slotted Hole Height Adjustment All mounting plates compatible with any Salice hinge series Hinge affixes to plate by sliding hinge onto plate and then tightening pre-mounted screw on plate Height adjustment of +/-2mm by slotted holes Standard 37mm x 32mm positioning Constructed of stainless steel nickel plated, corrosion resistant Lifetime warranty Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height Wood Screw Attachment Pre-Mounted Euro Screw Attachment 0mm U2V3H0915 U2VGH0917 3mm U2V3H3915 U2VGH3917 slide-on hinge mounting plates For Special Angle Applications Variable positioning allows for virtually infinite angle applications Hinge affixes to plate by sliding hinge onto plate and then tightening pre mounted screw on plate Angle possibilities from (-45 ) to (+160) Height adjustment of +/-2mm by slotted holes Standard 32mm hole centers Die-cast, nickel plated, corrosion resistant Lifetime warranty Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Wood Screw 15 Angle Wood Screw +7.5 to -7.5 Variable Wood Screw +10 to +30 Variable U2V3W915 U2V3W9R15 U2V3W9S15 15 Angle Fixed +7.5 to -7.5 Variable +10 to O +30 Variable CLIP-ON HINGE Mounting PLATES Single Cam Depth Adjustment Economical clip on plate compatible with all Salice hinges Series F and Series Depth adjustment of - 0.5mm to +2.8mm by eccentric cam Height adjustment of +/-2mm by slotted holes Standard 37mm x 32mm positioning Nickel plated, corrosion resistant Lifetime warranty Packing: 50 each per box. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height Open Hole Wood Screw Attachment Pre-Mounted Euro Screw Attachment 5mm Expanding Dowels Attachment stamped steel 0mm UAV3L09F UAVGL09F16 UAV4L09F16 3mm UAV3L39F UAVGL39F16 UAV4L39F16 6mm UAV3L69F UAVGL69F16 - die-cast steel 9mm UAV3E99F UAVGE99F16-12mm UAV3EC9F UAVGEC9F16-18mm UAV3EV9F UAVGEV9F UY-AER ( ) Fax:

46 base plates CLIP-ON HINGE Mounting PLATES Two Cam Height & Depth Adjustment Premium two cam adjustable hinge mounting plates that are compatible with all Salice hinges Constructed of stamped steel or die-cast steel with nickel plating to resist corrosion Two cam adjustment provides cam height adjustment of +/-2mm and cam depth adjustment of -0.5mm to +2.8mm Available in three different cabinet side fastening methods: 1.) Open hole for #6 x 5/8 wood screws, 2.) Pre-mounted Euro screws and 3.) Screw-in expanding 5mm dowels Lifetime warranty Packing: Full box quantity of 50. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height Open Hole Wood Screw Attachment Pre-Mounted Euro Screw Attachment 5mm Expanding Dowel Attachment stamped steel 0mm UAR3L09F UARGL09F16-3mm UAR3L39F UARGL39F16-6mm UAR3L69F UARGL69F16 - die-cast steel 0mm UAR3R09 UARGR0916 UAR4R0916 2mm UAR3R29 UARGR2916 UAR4R2916 3mm UAR3R39 UARGR3916 UAR4R3916 6mm UAR3R69 UARGR6916 UAR4R6916 9mm UAR3R99 UARGR mm UAR3RC9 UARGRC916 - Die-cast Steel Stamped Steel CLIP-ON, IN-LINE, HINGE Mounting PLATES Two Cam Height and Depth Adjustment Salice Domi slim style hinge mounting plates are constructed of die-cast steel Height adjustment by eccentric cam +/-2mm Depth adjustment by eccentric cam of 0.5mm to +2.8mm Nickel plated, corrosion resistant Available in three different cabinet side attachment methods: 1) Open hole for #6 x 5/8 wood screws, 2) Pre-mounted Euro screws and 3) Knock-in 10mm dowel Lifetime warranty Packing: 50 each per box. Sold in: oth broken and full box quantities. Discount available for full box orders. Plate Height Open Hole Wood Screw Attachment Pre-Mounted Euro Screw Attachment 10mm Knock-in Dowel Attachment 0mm UAP3R09 UAPGR0916 UAP7R09 2mm UAP3R29 UAPGR2916 UAP7R29 3mm UAP3R39 UAPGR3916 UAP7R39 6mm UAP3R69F UAPGR6916 UAP7R69-46 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

47 base plates Titus lama hinge mounting plates Frameless & Face Frame Titus hinge mounting plates are manufactured in Europe with an economical price Frameless hinge plates are constructed of stamped steel, face frame plates are constructed of stamped steel and zinc die-cast Limited lifetime warranty Available in four fastening designs: open hole wood screw, open hole Euro screw, pre-mounted Euro screw and expandable dowel Euro screw uses standard euro screws (not included), wood screw uses #7 (not included) All plates have height adjustment of +/-2mm via elongated screw hole or cam Packing: Full box quantity of 200 plates. Sold In: oth broken and full box quantities. Discount available for full box orders. Cam Adjustment Elongated Adjustment frameless mounting plates with +/-2mm elongated screw hole adjustment Height Adjustment Material Plate Height Open Hole Wood Screw Full ox Qty: 200 Open Hole Euro Screws Full ox Qty: 200 Pre-mounted Euro Screws ox Qty: 200 Expandable Dowel Full ox Qty: 200 Elongated Stamped Steel 0mm TT TT Elongated Stamped Steel 2mm - - TT Elongated Stamped Steel 3mm TT TT Elongated Zinc Die-Cast 18mm - TT frameless mounting plates with +/-2mm cam height adjustment Cam Stamped Steel 0mm TT244.0H TT244.0R TT244.0S TT244.0S Cam Stamped Steel 2mm - - TT244.0S Cam Zinc Die-Cast 3mm TT244.0H TT244.0R TT244.0S TT244.0S face frame mounting plates Height Adjustment Material Plate Height Wood Screw Full ox Qty: 200 Elongated Stamped Steel 0mm TT Elongated Stamped Steel 3mm TT Elongated Zinc Die-Cast 0mm TT Elongated Zinc Die-Cast 3mm TT Elongated Zinc Die-Cast 6mm TT Face Frame Stamped Steel Face Frame Zinc Die-Cast 800-UY-AER ( ) Fax:

48 hinge soft-close adapters hinge attachment soft-close Grass Nexis Series Soft-Close Adapters Easily add Soft-Close to any cabinet door using Nexis or Nexis Impresso hinges Three Nexis soft close adapters are designed to attach to Nexis and Nexis Impresso to cover a full range of hinges and applications: - Adapter for Nexis 95, 110 and 125 degree doweled and screw-on hinge cups - Adapter for Nexis and Nexis Impresso 170 degree hinge arm - Adapter for Nexis Impresso 95, 110 and 125 degree hinge cups Installs on to hinge cup in seconds without tools can be installed in the field State of the art, adjustable soft-closing damper covers a wide range of door sizes and weights Soft close dampening is easily adjusted by hand with adjustment screw Die-cast steel construction with Nickel finish blends in with hardware Mounts on cup- does not intrude into cabinet space 95, 110, and 125 hinges 1 unit per door for most applications multiple units can be used for very large doors Packing: Full box quantity of 125 adapters. Sold In: oth broken and full box quantities Description ox Qty SOFT-CLOSE FOR NEXIS for 95, 110 & 125 degree - doweled & screw-on designs GF Nexis Soft-Close Adapter 125 GF Nexis Soft-Close w/covercaps Set 125 Nexis Soft-close adapter Soft-close set Description ox Qty SOFT-CLOSE FOR NEXIS & nexis impresso wide angle 170 degree hinges GF Wide Angle Soft-Close 125 Description ox Qty SOFT-CLOSE FOR NEXIS impresso 95, 110 & 125 degree hinges ME Impresso Adapter 125 GF Damper 125 Soft-close Impresso adapter Soft-close damper Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

49 hinge soft-close adapters universal face frame cabinet soft-close Grass Unisoft Adjustable Soft-Close Grass Unisoft cabinet soft close devices is unhanded and mounts independently of door hinge The unit is designed to mount with a single screw to the upper corner of the cabinet opening Unisoft is constructed of high grade plastic and has a sleek brushed nickel finish housing The Unisoft soft-closing speed/tension can be easily adjusted by the hand turn of a rear screw Unisoft can be effectively used on a wide variety of door sizes and door weights, including face frame applications Scratch protector and front bumper with cushion for all quiet close Packing & Sold In: As shown below. GF GF GF GF ox Qty 1 each per poly bag 25 per box 250 per box 125 poly bags (point of purchase display) touch-latch push open hinge adapter set Grass Nexis Free Swinging Hinge Adapter Easily converts all models of Grass free swing hinges to touch open Snaps on to screw-on or doweled hinge cup Adjustable force-handles different size doors Gently tapping door front causes doors to open to a convenient angle 1 unit per door for most applications multiple units can be used for very large doors 1 set includes: (1) tipmatic plus adapter, (1) tipmatic plus ejector, (1) counterplate for gluing, (1) counterplate for screw fixing with screw and (1) magnetic pin Packing: As shown below. Sold In: oth broken and full box quantities. Discount available for full box orders. Description ox Qty GF Tipmatic Plus Set 100 GF Frame Adapter Plate UY-AER ( ) Fax:

50 hinge soft-close adapters universal cabinet soft-close Salice Smove, The Original Cabinet Soft-Close Insert Smove soft-close devices into 10mm diameter x 50mm deep bore hole or surface mount into Smove adapter Three different models feature three different tension levels to accommodate varying door sizes/weights and cabinet positioning Packing: As shown below. Sold in: oth broken and full box quantities. Discount available for full box orders. SMOVE FOR Insertion (box qty: 250) Light Tension Medium Tension High Tension UD006SNG UD007SNG UD008SNG SMOVE adapter (box qty: 500) Description eige Honey Face Frame Adapter Plates UD066SNN UD066SNQN Series S Face Frame Hinges UD067SNN UD067SNQN universal cabinet Soft-close Salice Type L Smove Adjustable Soft-Close One piece soft-close device is suitable for frame or frameless cabinets Can be used with either Salice S Series or 200 Series face frame applications Three models offer varying resistance levels to adapt to varying door styles, weights & overlay applications Additional tension adjustment is provided by tightening/loosening adjustment screw on the Type L Smove Attached using two common #6 x 5/8 wood screw Precise positioning established using the integrated front locator tab Precise, consistent positioning from cabinet side by means of assembly tabs Non handed. One Smove for either left or right side mounting Only 1 Smove Type L required per door Packing: 150 per case. Sold in: oth broken and full box quantities. Discount available for full box orders. Medium Tension UD0LHSNG For doors with 2 or 3 hinges (lack piston) High Tension UD0L8SNG For doors with 4 hinges (Orange piston) Extra High Tension UD0L9SNG For extremely heavy doors only (eige piston) - 50 universal face frame cabinet Soft-close Salice Type U Smove Adjustable Soft-Close One piece single face frame design for all door styles Soft top to prevent door marring and easily mounted using a single #6 wood screw Adjustable (screw turn) tension for varying door sizes/weights Consistent spacing using indexing tab Does not interfere with space needed for rollout shelves or access to hinge adjustment screws Convenient, single part ordering (Smove and housing as one integrated part) Packing: 150 per box. Sold in: oth broken and full box quantities. Discount available for full box orders. Left Side Mount UD0UR0G Würth aer Supply Company Over 40,000 products in-stock EVERYDAY! Right Side Mount UD0UL0G

51 hinge soft-close adapters hinge attachment soft-close Salice S Type Soft-Close for Hinge Mounting Applications Easy to mount after hinge installation The S type soft-close device contacts and connects to hinge flange, not to the door (prevents door marring) Does not interfere with hinge adjustments Low profile: Does not intrude on cabinet interior space Adjustable closing speed with turn of adjustment screw Only 1 Smove required per door Type S Smove soft closing devices are available in three tension settings: light, medium and high resistance Type S Smoves require a separate mounting block to attach Smove soft close device to the hinge flange - Mounting blocks are available in four heights to accommodate full to half overlay and inset hinge configurations - Mounting blocks come in two types: one type designed to affix to die-cast hinge plates and the second type is designed to affix to stamped steel mounting plates Packing: 300 per full box. Sold in: oth broken and full box quantities. Discount available for full box orders. TYPE S EURO SMOVE Light Tension UD0SHSNG For doors with 2 or 3 hinges (lack piston) Medium Tension UD0S8SNG For doors with 4 or more hinges (Orange piston) High Tension UD0S9SNG For extremely heavy doors only (eige piston) TYPE S Mounting LOCKS for use with salice die-cast steel hinge mounting plates With Full Overlay Hinge With 1/2 Overlay Hinge With Half (3/8 ) Overlay Item # With Inset Hinge UDARX09 UDARX59 UDARX99 UDARXCP9 TYPE S Mounting LOCKS for use with STAMPED steel hinge mounting plates With Full Overlay Hinge With 1/2 Overlay Hinge With Half (3/8 ) Overlay Item # With Inset Hinge UD2VX09 UD2VX59 UD2VX99 UD2VXP9 Step 1: Loosen mounting Step 2: Slide block under Step 3: Tighten screw. Step 4: Clip Smove to block 800-UY-AER plate screw. ( ) screw head. Fax: and adjust. - 51

52 hinge soft-close adapters universal face frame cabinet soft-close Titus Glissando Soft Closing System Stand alone one piece soft-close adapter designed for face frame cabinets Soft and gentle door closing Fastens directly to face frame (see illustration) so that it remains out of sight Adjustable for varied door heights and weights Packing: 100 each per box. Sold In: oth broken and full box quantities. Discount available for full box orders. TT951.0Z Application Face Frame hinge attachment soft-close Titus Glissando Soft Closing System Titus Glissando Soft-Closing System is designed to affix to Titus Lama 110 and 125 degree hinges (see hinges on pages -10 and -15) Fasten to the hinge cup via 15mm long screws (see illustration below) and does not require additional space inside of cabinet Has screw adjustable soft-close dampening adjustment to adjust for varying door sizes/weights Constructed of die-cast steel and plastic Packing: 100 each per box. Sold In: oth broken and full box quantities. Discount available for full box orders. TT951.0V TT951.0V For Use With 110 degree opening hinge 125 degree opening hinge - 52 Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

53 hinge accessories hinge accessories Packing: As shown below. Sold in: oth broken and full box quantities. Discount available for full box orders. A C D E F G H I J K L M N Description Grass rand Wurth rand Item # ox Qty Item # ox Qty SPACERS A 1.5mm (1/16 ) thick with locating pins GF mm (1/16 ) thick without locating pins GF C 1.5mm (1/16 ) thick, slotted GF E 1.5mm (1/16 ) thick, slotted for MDF hinge GF D 1.5mm (1/16 ) thick, hinge cup spacer GF grass hinge wood screws F #6 x 1/2 Flat head, Nickel GF WW ,000 G #6 x 5/8 Flat head, Nickel GF WW ,000 H #8 x 3/4 Round head, self-drilling, Zinc GF WW ,000 I #8 x 3/4 Pan head, self-drilling, Zinc GF WW ,000 J #8 x 3/4 Washer head, Nickel GF WW ,000 K #10 x 3/4 Pan head, Nickel GF grass hinge Euro SCREWS 13mm Euro screw (1/2 ) GF81015K 500 WW ,000 L 18mm Euro screw (11/16 ) GF83000K 500 WW , mm Euro screw (5/16 ) GF83001K 500 WW ,000 13mm Euro screw (1/2 ) Pan head GF WW ,000 covercaps Description Item # ox Qty M Nickel Plated Full Overlay Nexis Hinge Cover Cap GF ,000 Nickel Plated Half Overlay Nexis Hinge Cover Cap GF ,000 N lack Plastic Full & Half Overlay & Inset Nexis Hinge Cover Caps GF , UY-AER ( ) Fax:

54 salice hinge accessories salice hinge accessories Packing: As shown below. Sold in: oth broken and full box quantities. Discount available for full box orders. A C D E F G H I J K L Type Description ox Qty A Hinge Dowels 8mm hinge dowels for Series 200 hinges US2R660XY 1,000 Hinge Dowels 8mm hinge dowels for Series S face frame hinges US10E60XY 1,000 C Dowel Screws Screws for both dowel types UV284X114 1,000 D Stop Device Limits 165 or 155 degree hinge to 120 degrees US2AF37X3 100 E Stop Device Limits 165 or 155 degree hinge to 110 degrees US2F37XY 100 F Stop Device Limits 94 degree hinge to 86 degrees US2A637XF 500 G Hinge Arm Cover Cap lack or white color without logo US28683A1 White US28683A3 lack 100 H Salice Screw Driver Pozi drive screw driver UD2A7XCXCP 1 I J K L Not Pictured 12mm Depth Gauge (Gray) 13.5mm Depth Gauge (White) 15.5mm Depth Gauge (lack) Silentia Hinge Cup Spacers Used to verify 12mm Salice Silentia hinge cup boring depth Used to verify 13.5 mm Salice Silentia hinge cup boring depth Used to verify 15.5mm Salice Silentia hinge cup boring depth.6mm spacer for 110 hinge 1.2mm spacer for 110 hinge 1.8mm spacer for 110 hinge.6mm spacer for 155 hinge 1.2mm spacer for 155 hinge 1.8mm spacer for 155 hinge UD1A6ACGSN 1 UD7A6AC1SN 1 UD2A6AC3SN 1 US2XX86T US2XX86AT US2XX86KT USXF86XT US2XF86AT US2XF86KT Insertion Ram Insertion Ram for lum Mini Press Hinge Machine UTKRAM110FF 1 Insertion Ram Insertion Ram for 165 degree hinge, lum Mini Press Machine UTRAM , Würth aer Supply Company Over 40,000 products in-stock EVERYDAY!

MODUL general specifications

MODUL general specifications hinges general specifications inge-to-door attachment Mounting plate-to-cabinet Press-in Use #6 wood screws Pre-attached dowels, install with lum MINIPRESS lum boring pattern Door-to-cabinet attachment

More information

Functional Hardware HINGES:

Functional Hardware HINGES: Functional Hardware»» One Stop Shop for all cabinet manufacturing hardware including hinges, slides, screws, door bumpers, shelf pins, catches and more»» Third Party Testing on hinges and slides to meet

More information

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.

More information

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.

More information

Hinges and Flap Fittings Information

Hinges and Flap Fittings Information Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,

More information

TANDEM plus BLUMOTION

TANDEM plus BLUMOTION TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since

More information

Furniture Fittings Concealed Hinges

Furniture Fittings Concealed Hinges Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)

More information

STANDARD. Drawer runner program. Perfecting motion.

STANDARD. Drawer runner program. Perfecting motion. STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance

More information

Selekta Pro 2000 Fast assembly hinges for office and commercial furniture

Selekta Pro 2000 Fast assembly hinges for office and commercial furniture Fast assembly hinges for office and commercial furniture 99 The program opening angles 180 and 270 with pre-mounted pan-head screws with eccentric height adjustment ± 2 mm with eccentric overlay adjustment

More information

COMPACT BLUMOTION. COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION.

COMPACT BLUMOTION. COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION. COMPACT BLUMOTION COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION www.blum.com/compact Innovative technology concentrated in a small space BLUMOTION inside Since the 1980s Blum

More information

TANDEM plus BLUMOTION

TANDEM plus BLUMOTION TANDEM plus BLUMOTION TANDEM plus BLUMOTION Made in the USA Blum's newest generation of TANDEM plus BLUMOTION concealed drawer runners offers four-dimensional adjustment, elongated holes for depth adjustment,

More information

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted

More information

ASSEMBLY HARDWARE ASSEMBLY HARDWARE. Installation and assembly hardware for professional efficiency

ASSEMBLY HARDWARE ASSEMBLY HARDWARE.   Installation and assembly hardware for professional efficiency ASSEMBLY HARDWARE ASSEMBLY HARDWARE Installation and assembly hardware for professional efficiency www.grassusa.com Installation and assembly aids for all product families designed to suit our customer

More information

ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS.

ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS. ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS Zargen and Integra steel drawer systems provide flexibility to please the most demanding design needs. www.grassusa.com Zargen and Integra Drawer

More information

35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate

35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate 35mm 110 Deg. Concealed Hinge with Mounting Plate Most economical of our 35mm concealed hinges. 386 41102 00 386 41102 08 386 41102 15 Slide-on Full overlay Self Closing Slide-on Half overlay Self Closing

More information

MOVENTO. The Evolution of Motion

MOVENTO. The Evolution of Motion The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer

More information

SPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall.

SPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. SPECIAL HINGES From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. 0 GRASS THE CATALOGUE 0-0 SPECIAL HINGES Hinges for special applications. Where individual

More information

Assembly instructions

Assembly instructions AVENTOS HK-S Assembly instructions Required parts Lift mechanism set Set includes: Lift mechanism (qty 2) Cover plate (left and right) Also includes: SCHR 4X #7 x mm (-/8 ) wood screw (qty 0) Power factor

More information

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000 STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal

More information

How To Measure Your Finished Opening

How To Measure Your Finished Opening 3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips

More information

TheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered.

TheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com TheDepot.com To create a product innovation is

More information

STANDARD. Drawer runner program. Perfecting motion. blum.com

STANDARD. Drawer runner program. Perfecting motion. blum.com STANDARD Drawer runner program blum.com Perfecting motion Proven technology - built upon years of experience Blum testing criteria Cycle life/dynamic load capacity test Side pressure test 100,000 open/close

More information

Aluminum Continuous Geared Hinges

Aluminum Continuous Geared Hinges Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge

More information

THE COMPLETE CABINET

THE COMPLETE CABINET THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is

More information

THE COMPLETE CABINET

THE COMPLETE CABINET THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is

More information

Utensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides

Utensil sets. 15 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides. 21 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and

More information

Preference Collection 5580 Treatment Console INSTALLATION GUIDE

Preference Collection 5580 Treatment Console INSTALLATION GUIDE Preference Collection 5580 Treatment Console INSTALLATION GUIDE 0 WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious injury

More information

MARTIN WOOD PRODUCTS 2006 CABINET DOOR CATALOG

MARTIN WOOD PRODUCTS 2006 CABINET DOOR CATALOG code: MMM-06-MCW - June 2006 - Rev.1 2006 CABINET DOOR CATALOG division of Martin Wood Products, Inc. TRADITIONAL RAISED PANEL DOORS I would like to take this opportunity to personally thank you for your

More information

Heavy Duty Ball Bearing Drawer Slides Full Extension

Heavy Duty Ball Bearing Drawer Slides Full Extension 301FU Series Heavy Duty Ball Bearing Drawer Full Extension Ordering Length 10 12 350mm 14 16 18 20 22 24 26 28 Zinc 301FU10 301FU12 301FU350 301FU14 301FU16 301FU18 301FU20 301FU22 301FU24 301FU26 301FU28

More information

Designed for Your Convenience

Designed for Your Convenience Table of Contents Intro & Blum Drawer Box Adjustments Removing Drawer Alignment Dimensions Glide Adjustments Front Adjustments Hinge Adjustments Removing s Full Overlay Inset Concealed (CH) Inset Revealed

More information

KnobsandPulls.com. Presents. A Simplified Approach to Building Cabinets Using the 32mm System

KnobsandPulls.com. Presents. A Simplified Approach to Building Cabinets Using the 32mm System KnobsandPulls.com Presents the KISS II system. A Simplified Approach to Building Cabinets Using the 32mm System Available online at www.cabsystems.com Revised September 2007 by Joel Ketner or www.kissii.com

More information

AVENTOS lift system. AVENTOS HL lift up. Smooth motion for the lift up. Opening and closing easy and comfortable

AVENTOS lift system. AVENTOS HL lift up. Smooth motion for the lift up. Opening and closing easy and comfortable lift system Smooth motion for the lift up With HL, the one-part front lifts up parallel to the cabinet. This lift system is ideal for applications in high and wall cabinets with fronts above or in larder

More information

Machines and assembly aids. Devices to efficiently install Blum hardware

Machines and assembly aids. Devices to efficiently install Blum hardware Machines and assembly aids Devices to efficiently install Blum hardware Table of contents Application Chart MINIPRESS Drawer BOX Assembly Cabinets Hinges Runners Systems Fittings Page 4 MINIDRILL 6 Machine

More information

SOLO Concealed Runners for wood drawers

SOLO Concealed Runners for wood drawers SOLO Concealed Runners for wood drawers Perfecting motion Table of contents Application Chart Drawer Thickness Cabinet type Load Capacity 5/8" 3/4" Frame Panel Dynamic Static Page SOLO 262H 75 lb. 100

More information

Blum 110 BLUMotion 3/4" Overlay Face Frame Compact Hinge Instructions Effective August 2018

Blum 110 BLUMotion 3/4 Overlay Face Frame Compact Hinge Instructions Effective August 2018 Blum 110 BLUMotion 3/4" Overlay Face Frame Compact Hinge Instructions Effective August 2018 Finish Tab Cup Diameter Cup Depth Minimum Door Thickness Nickel 3mm 35mm 11mm 16mm (.63") Maximum Door Thickness

More information

Waste/recycle sets. Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com

Waste/recycle sets. Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX waste/recycle

More information

MODEL mm Hinges Included MODEL 1432 Hinges Purchased Separately Anti-Rak Cable System Flipper Door Slide Up to 75 lb. [34 kg.

MODEL mm Hinges Included MODEL 1432 Hinges Purchased Separately Anti-Rak Cable System Flipper Door Slide Up to 75 lb. [34 kg. PPLITIONS: Vertically mounted concealed doors for office/ residential storage cabinets, entertainment centers, and armoires. Use model 1332/1432 with unique nti-rak cable system to eliminate door sag and

More information

MOVENTO. The Evolution of Motion For 1/2" Drawer Material Thickness

MOVENTO. The Evolution of Motion For 1/2 Drawer Material Thickness The Evolution of Motion For 1/2" Drawer Material Thickness is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed

More information

Table and Furniture Base Fittings Plinth Adjusting Fittings

Table and Furniture Base Fittings Plinth Adjusting Fittings Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.

More information

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA 4/08/5 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA PINETOWN BALLITO KRABY DROP DOWN with Kimana Hinges (pg 3) For further information: www.italianaferramenta.com > CATALOGUE

More information

CLIP top BLUMOTION 107. The secret's inside even with a shallow boss drilling depth.

CLIP top BLUMOTION 107. The secret's inside even with a shallow boss drilling depth. CLIP top BLUMOTION 107 The secret's inside even with a shallow boss drilling depth www.blum.com CLIP top BLUMOTION 107 combines technology with convenience With CLIP top BLUMOTION 107 the secret's inside:

More information

Waste/recycle sets. Waste/recycle sets. Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com

Waste/recycle sets. Waste/recycle sets. Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com SERVO-DRIVE BLUMOTION Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX

More information

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty. Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic

More information

Kitchen Fittings Hanging Cabinets and Accessories

Kitchen Fittings Hanging Cabinets and Accessories Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting

More information

Hinge identification guide

Hinge identification guide Hinge identification guide CLIP hinge 3 main components Arm Link Cup Link Arm Cup NOTE: All hinges shown are straight-arm hinges. The same characteristics apply to cranked hinge arms with the exception

More information

BOLOTA 316 OTHER PRODUCT RANGES SERVICE

BOLOTA 316 OTHER PRODUCT RANGES SERVICE BOLOTA 316 BOLOTA 316 OTHER PRODUCT RANGES SERVICE INDEX Lever Handles Escutcheons & Bathroom Turns Academy Range Pull Handles Push Plates & Kick Plates Signage Lockcases Cylinders Door Controls Hinges

More information

Program Door and Drawer Front Specifications

Program Door and Drawer Front Specifications Program Door and Drawer Front Specifications The following specifications are for CRP-10 and TW-10 Program doors, and 3/" thick Slab and 1" thick #10 Program drawer fronts. These designs receive modified

More information

9/16" (14mm) 1/2" (12mm)

9/16 (14mm) 1/2 (12mm) Deluxe Header Kit Deluxe Header Kit Cat. No. SDH660-66" (1676mm) Length Cat. No. SDH980-98" (2489mm) Length Cat. No. SDH144-144" (3657mm) Length Each Deluxe Header Kit Contains: 66" (1676mm), 98" (2489mm)

More information

Northcote Two Door Cupboard Unit & Northcote Two Door Blackboard Cupboard Unit L1424 & L2037

Northcote Two Door Cupboard Unit & Northcote Two Door Blackboard Cupboard Unit L1424 & L2037 Thank you for shopping with GLT, we hope you enjoy having this product in your home. www.gltc.co.uk Northcote Two Door upboard Unit & Northcote Two Door lackboard upboard Unit L1424 & L2037 We know assembling

More information

Hinge Systems. Our technology adds movement and flexibility to furniture.

Hinge Systems. Our technology adds movement and flexibility to furniture. Our technology adds movement and flexibility to furniture. Hinge Systems Without the fitting, any item of furniture, no matter how attractive, fails to fulfill its purpose. This is the Hettich experience.

More information

Preference Collection and Treatment Console INSTALLATION GUIDE

Preference Collection and Treatment Console INSTALLATION GUIDE Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious

More information

PowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.

PowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered. Serving the Truck & Trailer Industry Since 1944 PowerLock Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,

More information

AVENTOS PHOTO BOX AVENTOS. Lift systems. Perfecting motion.

AVENTOS PHOTO BOX AVENTOS. Lift systems. Perfecting motion. AVENTOS PHOTO BOX AVENTOS Lift systems www.blum.com Perfecting motion AVENTOS smooth and silent lift systems 2 Lifting cabinet doors up and out of the way AVENTOS lift systems are the new premium functional

More information

Connector Technology, Shelf Supports Connection Fittings

Connector Technology, Shelf Supports Connection Fittings MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid

More information

AVENTOS HK-XS. Small fitting, great convenience. Technical data sheet.

AVENTOS HK-XS. Small fitting, great convenience. Technical data sheet. Small fitting, great convenience Technical data sheet www.blum.com Order specification 2 1 8a 8b well suited for wall cabinets and larder units cabinet heights of 20 to 00 mm Interior depth of 12 mm minimum

More information

www.hafeleindia.com www.hafeleindia.com Silver Gold Rose Gold Graphite Dark Bronze PROFIN : ONE RANGE. MANY SOLUTIONS. 2. Stack Modular Shelving Pg. 23-32 3. Rail Door Profiles Pg. 33-41 1. Gola Profiles

More information

Air - the truly concealed hinge

Air - the truly concealed hinge Air Air - the truly concealed hinge Air is an innovative and functional concealed hinge system, characterized by sophisticated design, compactness and very high performance qualities. Like traditional

More information

Parts List (Continued) 18 each: #8 x 0.625" Truss Head Phillips Screw 20 each: #8 x 1.75" Flat Head Phillips Screw 4 each: #8 x 1.25" Flat Head Philli

Parts List (Continued) 18 each: #8 x 0.625 Truss Head Phillips Screw 20 each: #8 x 1.75 Flat Head Phillips Screw 4 each: #8 x 1.25 Flat Head Philli EVO Tall Pull-Out Wood Pantry Important Notes Always read the instructions completely and carefully before beginning assembly. Remove and check contents for damage and/or missing parts. Keep the original

More information

Door Closers. General Information

Door Closers. General Information General Information Hager Companies offers a variety of surface door closers to meet a wide range of applications and uses. Heavy Duty, Grade 1 door closers are ideal for schools, hospitals, and other

More information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4

More information

Mounting Instructions Item No.: /521/522/420/421/422

Mounting Instructions Item No.: /521/522/420/421/422 Mounting Instructions Item No.: 541.35.520/521/522/420/421/422 Revolving Corner Unit In addition to these general mounting instructions, please refer to the fitting instructions, where the individual drilling

More information

Steele TV Stand Stock # BH

Steele TV Stand Stock # BH LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

More information

Advanced Frameless Library Guide Advanced options keeping you ahead of the competition. Version 17

Advanced Frameless Library Guide Advanced options keeping you ahead of the competition. Version 17 Advanced Frameless Library Guide Advanced options keeping you ahead of the competition Version 17 Introduction ADVANCED FRAMELESS LIBRARY GUIDE Hinge Setup Introduction Library Guide This library guide

More information

MODEL W1.0X305A(12 ) MODEL W1.0X610A(24 ) HAND BENDING BRAKE ASSEMBLY&OPERATING INSTRUCTION

MODEL W1.0X305A(12 ) MODEL W1.0X610A(24 ) HAND BENDING BRAKE ASSEMBLY&OPERATING INSTRUCTION MODEL W1.0X305A(12 ) MODEL W1.0X610A(24 ) HAND BENDING BRAKE ASSEMBLY&OPERATING INSTRUCTION 1 SAVE THIS MANUAL You will need the manual for the safety warning and precautions, assembly instructions, operating

More information

Installation Instructions

Installation Instructions by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...

More information

Vigilant Cigar Humidor Vault. Assembly Instructions

Vigilant Cigar Humidor Vault. Assembly Instructions Vigilant Cigar Humidor Vault Assembly Instructions Models: 1000, 1500, and 2000 Congratulations! You have purchased a superior cigar humidor. These humidors have been specifically designed to properly

More information

Designing emotions. agantis XP. Harmonious proportions. Elegant lines. Dynamic forms.

Designing emotions. agantis XP. Harmonious proportions. Elegant lines. Dynamic forms. Designing emotions agantis XP Harmonious proportions. Elegant lines. Dynamic forms. www.grass.at, info@grass.at 2 Designing emotions Focusing on the essential Dividing systems Drawer Pan drawers System

More information

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Organisational Kitchen Fittings Kitchen Cabinet Accessories Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic

More information

Engineering Data Rail Lifters

Engineering Data Rail Lifters Engineering Data Rail Lifters Bolt On Ready Stock Rails This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 12/13 - Rev.

More information

Technical Documentation Lift Advanced

Technical Documentation Lift Advanced Technical Documentation Lift Advanced 1 1 Introduction... 4 2 Basic Information... 5 2.1 Hinge Recommendations... 5 Lift Advanced HF... 5 Lift Advanced HK... 5 2.2 Usage of Aluminium Fronts... 5 19mm Aluminium

More information

Classic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.

Classic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered. Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com

More information

Blackout Instructions. 4 R-Series Fascia Installation Outside Mount

Blackout Instructions. 4 R-Series Fascia Installation Outside Mount Blackout Instructions 4 R-Series Fascia Installation Outside Mount 1 Components Needed page 3 Tools Needed page 4 System Diagram page 5 Instructions Step 1: Install Brackets. Page 6 Step 2: Mount Back

More information

Standard drawer runner program

Standard drawer runner program Standard drawer runner program i 230M Single extension, Blumatic self-closing drawer runners s: 250mm (10") to 650mm (26") 230 series drawer runners Cabinet profile Drawer profile Rear mount sockets available

More information

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt

More information

Adjusting, Changing and Maintaining The Latches and Catches on Your Airstream

Adjusting, Changing and Maintaining The Latches and Catches on Your Airstream Adjusting, Changing and Maintaining The Latches and Catches on Your Airstream Hinges,Latches and Catches in your Airstream Bumps, pulling, gravity and time can have an affect on hinges and latches. Adjustments

More information

Preference Collection 5543 Central Console INSTALLATION GUIDE

Preference Collection 5543 Central Console INSTALLATION GUIDE Preference Collection 5543 Central Console INSTALLATION GUIDE WARNING Failure to install the 5543 as described in this installation guide may cause the unit to collapse, resulting in serious injury to

More information

Smart Lock. Showcase Lock + Door Brace (For Double Swing-Out Doors) PL401 + PL420-01

Smart Lock. Showcase Lock + Door Brace (For Double Swing-Out Doors) PL401 + PL420-01 Smart Lock Showcase Lock + Door Brace (For Double Swing-Out Doors) PL401 + PL420-01 1 Overview Review entire instruction guide before starting installation. Instructions are intended for double swing-out

More information

Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11

Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11 -0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide

More information

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY. SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device

More information

FITTINGS, SCREWS, BOLTS, ETC.

FITTINGS, SCREWS, BOLTS, ETC. 5mm Connecting 3 Mending Plate Order number... 19-116 For 5/8 to 5/8...19-168 For 3/4 to 3/4...19-170 Packaged 5 pieces Finish: Bright Nickel Packaged 5 pieces Finish: Zinc Plated Connecting Bracket For

More information

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1

More information

WALL UNIT. Assembly Guide Lift. 288 x x x x 800

WALL UNIT. Assembly Guide Lift. 288 x x x x 800 Assembly uide 288 x 600 288 x 800 360 x 600 360 x 800 or Internal Use: I.WR.INS.032_WKIN00121_WALL_600_800_Lift_Rev2.indd Assembly uide EORE YOU START INSTALLATION SHOULD E PERORMED Y A OMPETENT PERSON

More information

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment. Attachment Tab Height: 19-1/2 Attachment Tab Width: 19 Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and

More information

Section 1. Kitchen installation. Base cabinets

Section 1. Kitchen installation. Base cabinets Section 1 Kitchen installation Base cabinets Pre-build - Cabinet leg... page 16 Pre-build - Alternative cabinet leg... page 18 Pre-build - Cabinets.... page 19 Pre-build - Corner base cabinet centre upright

More information

Classic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.

Classic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered. Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com

More information

The Q Frame PROJECT. a picture frame with secrets created exclusively for the Router Forum

The Q Frame PROJECT. a picture frame with secrets created exclusively for the Router Forum The Q Frame PROJECT a picture frame with secrets created exclusively for the Router Forum 007 OR RELEASE FPLANS APPROVED The Q Frame: Project Overview LIST OF MATERIALS Frame Sides & Face 3/4 x 5 1/2 x

More information

www.hafeleindia.com www.hafeleindia.com INTRODUCTION Intuitive furniture is the need of the hour. In times like these where every extra square meter is considered as good as gold, installing versatile

More information

Music Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance

Music Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance 1.00 General 1.01 Summary Music Area Casework A. This section includes the following Scope of Work as referred to in the plans: 1. Thermally Fused Laminate manufactured casework, for use in music areas,

More information

In addition to this general mounting and adjustment instruction you need the fitting specification document, where the individual drilling dimensions

In addition to this general mounting and adjustment instruction you need the fitting specification document, where the individual drilling dimensions Mounting and Adjustment Instruction for corner carrousel fitting In addition to this general mounting and adjustment instruction you need the fitting specification document, where the individual drilling

More information

Special Thumb Screw Order Form

Special Thumb Screw Order Form Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly

More information

MODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*

MODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets* 1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further

More information

MEDIUM DUTY LOCKS - LEVERS. Distributed By. DH Pace National Key Service Center DHPace.

MEDIUM DUTY LOCKS - LEVERS. Distributed By. DH Pace National Key Service Center DHPace. CYLINDRICAL LOCKS MEDIUM DUTY LOCKS - LEVERS Distributed By DH Pace National Key Service Center 855-237-3667 BestSolutions@dhpace.com DHPace.com/BestSolutions TABLE OF CONTENTS TABLE OF CONTENTS Page Features...2

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last

More information

INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK

INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK LABORATORY Casework & Cabinets INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK RDM Industrial Products, Inc. RDM LAB CABINET INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage...1

More information

786 Kurka Jig Owners Manual

786 Kurka Jig Owners Manual 7 Kurka Jig Owners Manual Please Read Carefully! 7 Parts List Parts listed in this box are shown in photos in the instructions. Part Description Quantity 7B Jig Plate Set, pieces..................... Six

More information

Chapter 9. Windows and Exterior Doors

Chapter 9. Windows and Exterior Doors Chapter 9. Windows and Exterior Doors 9.1 INSTALLING WINDOWS 9.2 INSTALLING EXTERIOR HOUSE DOORS 9.3 INSTALLING SHED DOOR 9.4 INSTALLING BASEMENT EGRESS COMPONENTS Tools needed by volunteers: Hammer Nail

More information

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing. F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405

More information

TRUTH TIPS: 1. Operator handing is determined by the hinge side when viewed from the outside.

TRUTH TIPS: 1. Operator handing is determined by the hinge side when viewed from the outside. CASEMENT AWNING 15 ENTRYGARD Dual arm action pushes the sash open while pulling the hinge side of the sash to the open position. When properly installed this operator results in almost effortless operation

More information

PULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE

PULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE BUILD Stock Item 12229 Drawer s, 2 1 2" x 48" 63420 Baltic Birch Ply, 1/4" x 24" x 30" 38742 Maple, 3/4" x 3" x 24" 45953 100# Zinc Over-Travel Drawer Slides - Centerline 757-20" 30254 #8 x 1 1 4" Square

More information

ESSENCE. Shower / Tub Door Installaion Instructions

ESSENCE. Shower / Tub Door Installaion Instructions ESSENCE Shower / Tub Door Installaion Instructions IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,

More information