Options. Exposed Ends (EXP) Flush Ends (FL) Flush Unexposed Ends (FUE) Cabinet Systems Winter
|
|
- Wendy McDonald
- 6 years ago
- Views:
Transcription
1 Exposed Ends (EXP) Mtching specie veneer on 1/2" thick cbinet sides. Avilble in both Advntge nd Essence lines. Specify: L (Left), R (Right) or B (Both). 1/4" revel from edge of front frme to surfce of the side. Soft Mple nd Hrd Mple cbinets hve Hrd Mple exposed ends. Pricing: per cbinet, per side Advntge: use exposed end pricing column. Essence: exposed end pricing unpublished. Flush Ends (FL) Mtching specie veneer on exposed of 3/4" thick cbinet sides. Avilble in Advntge line only. Specify: L (Left), R (Right) or B (Both). 1/32" revel from edge of front frme to surfce of the side. Soft Mple nd Hrd Mple cbinets hve Hrd Mple flush ends. Pricing: per cbinet, per side use flush end pricing column. Flush Unexposed Ends (FUE) Shop grde veneer on exterior fce of 3/4" thick cbinet sides finishing is not vilble. Order when thicker, non-exposed sides re required for solid surfce nd stone counter tops. Avilble in Advntge line only. Specify: L (Left), R (Right) or B (Both). 1/32" revel from edge of front frme to surfce of the side. Pricing: per cbinet, per side use Conestog s online ordering system or Conestog order entry for pricing. Key: D=Number of Doors DF=Number of Drwer Fronts DB=Drwer Boxes EXT=Extended Stiles EXP=Exposed End(s) FL=Flush End(s) WS=Solid Wood Shelves MI=Mtching Interior FT=Flush Toe Cbinet Systems Winter
2 Extended Stiles (EXT) Adds 3" to the left, right or both stiles s n lterntive to loose filler strips. Specify: ESL (Extended Stile Left), ESR (Extended Stile Right) or ESB (Extended Stile Both). Totl stile width is 4-1/2" with no glue lines. Avilble on most wll, bse nd tll units. Mtching Interior (MI) Cbinets will hve unfinished mtching specie interior sides, tops, bottoms, shelves nd bcks. Avilble on Advntge line only. Specify: MI (Mtching Interior). Shelves re mtching specie 3/4" plywood with veneer edgebnding on front edge. Soft Mple nd Hrd Mple cbinets hve Hrd Mple veneered interior components. Cbinets with mtching interior stndrd do not hve the mtching interior upchrge included in the cbinet price. Pricing: per cbinet percentge upchrge per specie. Mtching Specie Interior Specie Percent Upchrge Cherry 30% Mple 25% Red Ok 15% Key: D=Number of Doors DF=Number of Drwer Fronts DB=Drwer Boxes EXT=Extended Stiles EXP=Exposed End(s) FL=Flush End(s) WS=Solid Wood Shelves MI=Mtching Interior FT=Flush Toe.2 Cbinet Systems Winter 2016
3 Flush Toe (FT) Bottom ril height is 5-1/2". Specify: FT (Flush Toe). Cbinet side is mnufctured without toe notch. 96" tll cbinets do not use toe pltform. Avilble on most bse nd tll cbinets. Shped Bottom Ril (SBR) Ril height is 5-1/2". Flush toe option is stndrd; cbinet side is constructed without toe notch. Design is centered on bottom ril. To order specify using CWS designtions ssocited with the design. Not vilble with loose toe pltform option for tll cbinets. Avilble on most bse, tll nd vnity cbinets. Minimum cbinet width is 15". Use Conestog s online ordering system or Conestog order entry for pricing. CWS6 Elegnt Arch shown CWS4 Romn Arch: CWS6 Elegnt Arch: CWS5 Clssic Arch: CWS7 Trditionl Arch: Dust Top (DT) Full top in plce of front nd bck top strips. Avilble on Advntge or Essence lines. Specify: DT (Dust Top). Use Conestog s online ordering softwre or Conestog order entry for pricing. Key: D=Number of Doors DF=Number of Drwer Fronts DB=Drwer Boxes EXT=Extended Stiles EXP=Exposed End(s) FL=Flush End(s) WS=Solid Wood Shelves MI=Mtching Interior FT=Flush Toe Cbinet Systems Winter
4 Prepre for Flse Door Side Option (PFD) Solid Wood Shelf Upgrde Prepres the sides of wll, bse, tll or vnity cbinets to ccept 3/4" thick doors s decortive, integrl cbinet sides. Doors not included, must be ordered seprtely. Cbinet crcss width is reduced to provide 13/16" extension of the front frme on left, right or both sides. Overll cbinet front width remins unchnged. Left nd right stiles re 1-1/2" wide. Avilble on Advntge or Essence lines. Specify: L (Left), R (Right) or B (Both). Avilble on most wll, bse nd tll cbinets. Conceled Inset Hinges nd Pull-Out Trys (POT s) re not vilble with Prepre for Flse Door Side Option. Use Conestog s online ordering system or Conestog order entry for pricing. Order door width 3/4" less thn overll cbinet depth. Height of door equls cbinet height. Replces Advntge line 3/4" thick prefinished plywood shelving with 3/4" thick, prefinished solid wood shelving with bullnose on front edge. Solid wood shelves vilble up to 18" deep. Solid wood shelf upgrde is not vilble with mtching interior. Pricing: per cbinet use shelf pricing column. Plywood Shelf Upgrde Replces Essence line 3/4" thick pper covered prticle bord shelving with 3/4" thick, prefinished plywood shelving. Use Conestog s online ordering system or Conestog order entry for pricing. Key: D=Number of Doors DF=Number of Drwer Fronts DB=Drwer Boxes EXT=Extended Stiles EXP=Exposed End(s) FL=Flush End(s) WS=Solid Wood Shelves MI=Mtching Interior FT=Flush Toe.4 Cbinet Systems Winter 2016
5 Plywood Toebord Strips 1/2" thick 4" x 96" plywood strips vilble in Cherry, Hrd Mple or Red Ok. Order s loose prt; specify specie. Plywood Toebord Strips TE5003 (4" x 96") Specie Cherry Mple Red Ok Price Plywood Toebord Bcker 1/2" thick unfinished plywood strips. Designed to fully enclose bse, tll nd vnity toe spces nd provide bcker for finished toebords or mouldings. Bckers re 4-15/16" high, sized to fit between cbinet sides in the toe spce notch. To order, check toebord bcker option. Toebord Bcker Option Cbinet Width Less thn 36" 36-1/16" & bove Price Per Cbinet Cbinet Systems Summer
6 Custom Top Revel (CTR) Specify Totl Top Revel Reduces door height to ttch decortive mouldings directly to cbinet fce frme. Left, right nd bottom revel remin unchnged. Avilble with 1-1/4" nd 1-3/8" overly only. 1-1/4" overly 1/2" top revel is stndrd, CTR vilble 9/16"- 1-1/4". 1-3/8" overly 1/4" top revel is stndrd, CTR vilble 5/16"- 1-1/4". Revel cn be specified in 1/16" increments. Specify: CTR followed by the totl mount of top revel required. Mximum revel is 1-1/4". See the Doors/Overly section for stndrd overly rules. Custom Bottom Revel (CBR) Reduces door height to ttch light ril or decortive mouldings directly to the bottom ril of the cbinet fce frme. Left, right nd top revel remin unchnged. Avilble with 1-1/4" nd 1-3/8" overly only mx CBR 1-1/4". Revel cn be specified in 1/16" increments. Specify: CBR followed by the totl mount of bottom revel required. Mximum revel is 1-1/4". See the Doors/Overly section for stndrd overly rules. Specify Totl Bottom Revel 4 Sided Dovetil Drwer Boxes English dovetil construction. Advntge drwer sides nd ends re 5/8" thick solid wood with 1/4" Birch plycore bottoms. Essence drwer sides nd ends re 5/8" thick plywood with 1/4" Birch plycore bottoms. Drwer boxes re ssembled nd prefinished. Drwer boxes cn be ordered with bottom lip mount or undermount drwer slides nd re pckged on skid seprte from cbinets. Boxes will be notched nd hook hole drilled ccordingly, bsed on slide requirements. Approprite upchrges pply. Hrd Mple, Soft Mple nd Wlnut drwer boxes re vilble with Cbinet Systems orders; custom pricing nd led-times pply. Pricing use 4-sided pricing column for cbinets using Blum STANDARD 230 slides. Add custom upchrges nd drwer slide upgrdes s needed per box. See the Interior Storge section of the Custom Product Mnul for dditionl drwer box led-times, options nd pricing..6 Cbinet Systems Summer 2017
7 Drwer Slide Bottom Lip Mount Slides STANDARD Blum STANDARD 230 Stndrd slide for drwer boxes on 18", 21" nd 24" deep cbinets only. Cbinet bcks hve pilot holes to locte rer mounting brckets. Not vilble with wll cbinets or POT s. 1/2" bottom revel is stndrd. Undermount Slide Optionl Upgrde Blum TANDEM Plus BLUMOTION Integrted Soft Close Optionl slide for drwer boxes on 18", 21" nd 24" deep cbinets. Stndrd slide for drwer boxes in 12", 15", 27" nd 30" deep cbinets. Cbinet bcks hve pilot holes to locte rer mounting brckets. Full extension zinc coted steel with rer mount screw-in brcket (15", 18", 21" or 24" deep). Side mount with clets (12", 27", or 30" deep). 1/2" bottom revel, undermount notch nd hook hole required. Blum TANDEM sizing without slides lso vilble. Upgrde price (including slides nd hrdwre): for 18", 21" nd 24" deep cbinets. Side Mount Slides Bll Bering Full Extension Stndrd slide for wll cbinets nd POT s when ordered with Blum STANDARD 230. Not vilble with bse, vnity or tll cbinets. 1/2" bottom revel is stndrd. Ordering - With Cbinet Select Blum STANDARD 230 or Blum TANDEM Plus BLUMOTION from drwer boxes/drwer slides box on Cbinet Systems order form. Side mount slides will replce Blum STANDARD 230 slides s pproprite for specific cbinets. Ordering - Loose Prts Cbinet Depth Blum STANDARD 230 Blum TANDEM Plus BLUMOTION Bll Bering Full Extension 12" Deep A 12-1/2" Deep A 15" Deep A 18" Deep A A 21" Deep A A A 24" Deep A A A 27" Deep A 30" Deep A Cbinet Systems Fll
8 Cbinet Hinge BLUM Progrm Overview One piece steel, nickel plted conceled hinges designed for use with 3/4" thick front frmes. Hinges pcked in pirs or bulk pck nd include mounting screws, instlltion instructions nd wrrnty informtion. Hinge option is only vilble on door styles nd edge profiles which support conceled hinge boring. Doors over 42" high will receive 3 hinges. Specify hinging left or right for single door cbinets if hinge boring option is selected. Blum hinges crry limited lifetime wrrnty. COMPACT BLUMOTION Hinges with Integrted Soft Close Avilble for 1/2", 1-1/4" nd 1-3/8" overlys. Soft close feture is integrted in the hinge cup itself. Soft close function cn be esily dectivted with switch on individul hinges s needed bsed on the door size nd weight. All hinges feture side, height, nd depth djustment for fine tuning door spcing with wrpround fce frme mounting for ese of instlltion. Blum COMPACT BLUMOTION hinges require Pttern A cup only boring. Note: When 1-1/4" or 1-3/8" overly is ordered, extended stiles or loose filler strips my be required in pplictions where cbinets re instlled next to tll cbinet, corner cbinet or wll. Hinges vilble in pirs or bulk pck (50 hinges per pck, including mounting screws). 1/2" Overly Hinge Blum COMPACT BLUMOTION 38N 105 opening ngle COMPACT BLUMOTION Hinges (per pir) Prt # Overly Price A 1/2" A 1-1/4" A 1-3/8" COMPACT BLUMOTION Bulk Pck Hinges (50 hinges) Prt # Overly Price A 1/2" A 1-1/4" A 1-3/8" 1-1/4" nd 1-3/8" Overly Hinge Blum COMPACT BLUMOTION 39C 0 opening ngle.8 Cbinet Systems Fll 2016
9 Cbinet Hinge (continued) Blum Specilty Hinges 170 Hinges (overly 170 shown) Blum 71T6550 hinge Blum 175H6000 mounting plte Overly 170 Blum 71T6650 hinge Blum 175H5030 mounting plte Inset 170 Provides full ccess to cbinet interiors with 170 opening ngle for overly nd inset door pplictions. In 1-1/4" nd 1-3/8" overly pplictions, cbinets will hve their doors sized s 1/2" overly in width only. Two-piece, clip style hinge with side, height nd depth djustment points. 170 corner hinges require Pttern B cup only boring. BLUMOTION soft close feture is not vilble. Stndrd on WCP nd BLS cbinets. To order loose, specify: w Overly 170 prt # A w Inset 170 prt # A Inset Hrdwre Inset Mounting Brckets for TANDEM plus BLUMOTION Drwer Slides Drwer slide djustble mounting plte system for inset pplictions with frmed cbinetry. Elimintes the need for supplementl blocking behind fce frmes to secure TANDEM slides. Sold in pirs, brcket sets include instlltion screws nd instructions. Brckets fford up to 5/8" depth djustment using stndrd TANDEM rer mounting brckets. To order loose, specify prt # Conceled Inset Hinges Hinge nd mounting plte system for conceled inset pplictions with frmed cbinetry. Soft close feture is integrted in the hinge cup. Hinge pcks include screws nd two djustble door stops with bumpers. Conceled inset hinges require Pttern B cup only boring. Door nd front frme thickness must mtch. To order loose, specify prt # A. (view of inside of cbinet) Blum 71B3650NI hinge Blum 175H mounting plte 120 opening ngle Cbinet Systems Summer
10 Cbinet Hinge (continued) Ferrri Progrm Overview One piece steel, self closing conceled hinges designed for use with 3/4" thick front frmes. Hinges pckged in pirs with mounting screws, instlltion instructions nd wrrnty informtion. Hinge option is only vilble on door styles nd edge profiles which support conceled hinge boring. Doors over 42" high will receive 3 hinges. Specify hinging left or right for single door cbinets. Ferrri hinges crry limited lifetime wrrnty. Overly Hinges Avilble with 1/2", 1-1/4" or 1-3/8" overlys. Soft close feture is integrted in the hinge cup. All hinges feture side, height nd depth cm style djustment for fine tuning door spcing. Ferrri hinges require Pttern A cup only boring. Note: When 1-1/4" or 1-3/8" overly is ordered, extended stiles or loose filler strips my be required in pplictions where cbinets re instlled next to tll cbinet, corner cbinet or wll to ensure dequte clernce for door functionlity. Ferrri Compct 1/2" Overly Hinge 105 opening ngle Ferrri Hinges (per pir) Prt # Overly Price A 1/2" A 1-1/4" A 1-3/8" Ferrri Compct 1-1/4" nd 1-3/8" Overly Hinge 105 opening ngle.10 Cbinet Systems Summer 2017
11 Shelf Omit Shelving Choose to omit interior shelving in wll, bse nd tll cbinets. Wll nd bse omit option deletes ll shelves. Tll cbinets: specify top, bottom or ll shelves. Omits shelving only; if shelf holes re not required, specify No Shelf Hole Option. Use Conestog s online ordering system or Conestog order entry for pricing. No Shelf Hole Option (NSH) Choose to omit line boring for shelf rests in wll, bse nd tll cbinets. Most wll nd ll bse omit option deletes ll holes. Two tiered wll cbinets (TTW) nd tll cbinets: specify top, bottom or ll holes. Omit shelf holes only; if shelves re not required, specify Omit Shelving Option. No upchrge. Nturl Finished Bottom Advntge line only. Cler UV finish on Nturl Birch veneer on top nd bottom of wll cbinets. To order, specify nturl finished bottom. Use Conestog s online ordering system or Conestog order entry for pricing. Cbinet Systems Summer 2017.
12 Extended Height Option - Tll Cbinets Vrible 96-1/16" - 120" Choose to extend height of Custom Size Tll Cbinets from 96-1/16" to 120". Advntge line only. Mtching interiors not vilble. Fixed section is bsed on cbinet configurtion chosen. Flush ends only. Use Conestog s online ordering system or Conestog order entry for pricing. Seprte 4" high toe pltform is vilble in ll heights nd is strongly recommended for the extended height option. When cbinet height chnges, top opening height chnges ccordingly. Mximum overll height is 120". 96-1/16" to 108" tll cbinets hve 8 shelves /16" to 120" tll cbinets hve 9 shelves. Fixed.12 Cbinet Systems Summer 2017
13 Squre Toe Notch Option Intersecting corner of toe kick notch is 90. Aids in toebord moulding instlltion. Avilble on most bse, tll nd vnity cbinets. Not vilble with flush toe or shped bottom ril options. Stndrd 1/4" rdius 90 squre toe notch Leg Extension (LE) Option extends exterior frme stiles to the floor into toe spce for furniture leg styling. To order specify leg extension left, right or both. Stile width is 1-1/2". Not vilble with loose toe pltform or shped bottom ril. Toe spce side option is vilble, not on the sme side s the extension. Avilble on most bse tll nd vnity cbinets. Minimum cbinet width is 9". Toebord bcker vilble. Use Conestog s online ordering system or Conestog order entry for pricing. Cbinet Systems Summer
14 Toe Spce Side Option (TSS) Plces stndrd toe spce depth on the left, right or both sides of most bse cbinets. Avilble in Advntge or Essence Lines. Specify TSS L (Left), R (Right) or B (Both). Toe Spce Side is not vilble on the following cbinets: BLS, BSC, BCFD, BAE, BEAL/R, RTB, RTR, RTL, TCH, DB, DBFD, DB2D, DB3D, LF2D, ORS, DWEP, REP, BFC, WSUD nd FS. Minimum cbinet width nd depth is 15". Shped Side Option (SSO) Option incorportes one of four vlnce designs on exposed of flush ends. To order, specify using Conestog designtions ssocited with the design. Avilble in Advntge or Essence Lines. Specify SSO L (Left), R (Right) or B (Both). Design is centered on the length of the cbinet side Not vilble with extended stiles, loose toe pltform or flush unexposed ends. Toe spce side option is vilble with but not on the sme side s the shped side option. Avilble on most bse, tll nd vnity cbinets. Minimum cbinet depth is 15". CWS6 Elegnt Arch shown CWS4 Romn Arch: CWS6 Elegnt Arch: CWS5 Clssic Arch: CWS7 Trditionl Arch:.14 Cbinet Systems Summer 2017
Extended Stiles (EXT)
This section details the options that are available on the RTA. The Available Options section mirrors the options bar you see associated with each cabinet in the WALL, BASE, TALL, VANITY and HOME OFFICE
More informationAbout Conestoga Wood Specialties
About Conestoga Wood Specialties Since 1964 Conestoga Wood Specialties has manufactured the highest quality cabinet doors and wood components for the Kitchen & Bath industry. From our modest beginnings
More informationCustomer Name: Page: of Order Date: PO#: Thickness: 3/4" 1" Thickness: 3/4" 1" Grain Direction: Horizontal Vertical
1.866.937-7429 QuikDrawers.com Forms Pack Door/Drawer Front Order Form #1 Ship To: Attention: Phone#: Door Design Information Design: Expedites: Red (50% upcharge) Blue (25% upcharge) Shipping Instructions:
More information* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970726* 23970726 33/3549A CS 33/3549A Instlltion Instructions This instruction covers new instlltion of the 33/3549A conceled verticl device for luminum nd hollow metl doors. RF Also covered is the
More informationDRAWING TABLE SYSTEM
DRWING TBLE SYSTEM DT31, DT61S, & CDTC71 MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED : : CRETED NME THIS DRWING IS THE SOLE PROPERTY OF DIVERSIFIED WOOD CRFTS. IT MY NOT BE LTERED OR CHNGED WITHOUT
More informationFrom Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More informationFrom Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More informationDRAWER BASE DRAWING TABLE
MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED B UPD STEP 1 NME ECN NO. : : : DIMENSION RE IN INCHES 1 OF 10 K:\DIVERSIFIED\\CD\.dwg, 9/25/2018 9:04:08 M, DWG To PDF.pc3 TOOLS REQUIRED 1 2 " WRENCH 1
More informationNORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T2 Phone: (59) 637-7899 Toll Free: (800) 265-570 Fax: (59) 637-3403 Web Site: www.northstarwindows.com NORTH STR 2-PNEL PTIO DOOR SSEMBLY INSTRUCTIONS I:\PDssembly\2Panel\CovPg.doc
More informationExtremely small "footprint" and the highest circuit density available AK550. Front Wire Entry
FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers
More informationUltimate Trilennium Astragal Prehanger Installation Instructions
Ultimte Trilennium Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure 1" Spde Bit Kit Includes: Full Astrgl Full
More informationAbout Conestoga Wood Specialties
About Conestoga Wood Specialties Since 1964 Conestoga Wood Specialties has manufactured the highest quality cabinet doors and wood components in the Kitchen & Bath industry. From our modest beginnings
More informationAbout Conestoga Wood Specialties
About Conestoga Wood Specialties Since 1964 Conestoga Wood Specialties has manufactured the highest quality cabinet doors and wood components in the Kitchen & Bath industry. From our modest beginnings
More informationFitting & User Instructions
Issue 03 Alexnder Universl Furniture Risers Note: These frmes require the ddition of n ttchment. (See pges 4 - ) Bse Frme Mrk Bse Frme Mrk Fitting & User Instructions These instructions pply to the rising
More informationPLANNING & LAYOUT BENCH
MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED : : : LL VLUES ± OVERLL CRETED 1 OF 5 K:\DIVERSIFIED\\CD\.dwg, 11/30/2015 9:58:11 M, DWG To PDF.pc3 TOOLS REQUIRED 1 2 " WRENCH 1 2 " SOCKET ND TORQUE WRENCH
More informationAbout Conestoga Wood Specialties
About Conestoga Wood Specialties Table of Contents Since 1964 Conestoga Wood Specialties has manufactured the highest quality cabinet doors and wood components for the Kitchen & Bath industry. From our
More informationFOR DEVICES SOLD PRIOR TO
23970734 98/9949 CS 98/9949 FOR DEVICES SOLD PRIOR TO 8-10-16 This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Instlltion Instructions
More informationTP Series - Triple PV Top of Pole Solar LED Lighting System
TP Series - Triple PV Top of Pole Solr LED Lighting System Instlltion Mnul MKTG-TP34-02-EN-1113 Instlltion Mnul TP Series Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion
More informationUltimate Push Button Astragal Prehanger Installation Instructions
Ultimte Push Button Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure Kit Includes: Full Astrgl Full Length
More informationTubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a
Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless
More information* TURNING SPACE ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * TURNING SPACE ** RAMP
* MXIMUM TURNING SPCE IS 2.0% IN ECH DIRECTION OF TRVEL. MINIMUM DIMENSIONS 5' x 5'. SEE NOTES. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). SEE NOTES. "NON-WLKING" RE * TURNING SPCE 24"
More informationMulti-Point Astragal Prehanger Installation Instructions
Multi-Point Astrgl Prehnger Instlltion Instructions 8817 West Mrket Street Colfx, NC 27235 800.334.2006 www.endurproducts.com Tools Required: Endur Router Templte (or equivlent) Router with 5/8" dimeter
More informationTable of Contents. Items Only Available in Hampshire Custom Line
9225 State Route 66 Piqua, OH 45356 (937) 773-3493 Catalog updates available at /catalogs Table of Contents 3/4 Door Pilaster Added To The End Of Tall Cabinet I-3 Angled Tall End Panel I-4 Chamfered Stile
More informationMAYWOOD. Hospitality & ConferenCe tables FURNITURE CORP. GSA Approved! Contract #GS-28F-0050W. Established 1918
MAYWOOD FURNITURE CORP. Mnufctured in the U.S.A. Estblished 1918 Hospitlity & ConferenCe tbles www.mywood.com GSA Approved! Contrct #GS-28F-0050W bout us Circ 1930 Mywood Furniture Corportion ws estblished
More informationBathroom installation instructions
Bathroom installation instructions INSTLLTION INSTRUCTIONS Contents Important Note These fitting instructions refer to fitting Utopia Furniture to a solid wall. If your bathroom has studded walls, please
More informationCanopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev:
Cnopy Bed Frme Dte: 8 un 15 www. potterybrn.com Pge 1 of 12 Importnt Sfety Instructions: WARNIN: Do not llow children to climb on, pull on, or hng from cnopy. Filure to follow these instructions cn result
More informationGE Monogram 36" Built-In Bottom-freezer Refrigerator
SECTION 1 FLUSH INSET INSTLLTION SECTION 2 STNDRD INSTLLTION 1/4" FRMED PNELS 3/4" OVERLY PNELS OVERLL DIMENSIONS FLUSH INSET INSTLLTION 38" (96.5) 25 7/8" (65.7) 20 5/8" (52.4) 9 5/8" (24.4) * 8 (212.1)
More informationUPTOWN CANOPY FRAME T/F/Q
UPTOWN CANOPY FRAM T/F/Q Dte: 30 Mr 16 www.pbteen.com Pge 1 of 12 mportnt Sfety nstructions: Plese red ll instructions crefully before ssembling. For your sfety, ssembly by two or more dults is strongly
More informationPULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE
BUILD Stock Item 12229 Drawer s, 2 1 2" x 48" 63420 Baltic Birch Ply, 1/4" x 24" x 30" 38742 Maple, 3/4" x 3" x 24" 45953 100# Zinc Over-Travel Drawer Slides - Centerline 757-20" 30254 #8 x 1 1 4" Square
More informationFurniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
More informationCustom Dovetail Drawer Boxes. Interior Storage. Custom Dovetail Drawer Box Specifications
Custom Dovetail Drawer Boxes 10 Conestoga s Drawer Box program offers multiple wood specie selections and custom options. Information about dovetail drawer boxes and related options are found on the following
More informationCabinetry Design and Planning Guide
Cabinetry Inc. Face Frame Styles Door Styles Wood Species Cabinet Finishing Accessories Cabinetry Design and Planning Guide Designed to make all our lives easier. Face Frame Styles Standard 2 Stiles and
More informationPB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars
PB-735 HD DP Automtic punch nd bind mchine for books nd clendrs A further step for the utomtion of double loop binding. A clever nd flexible mchine ble to punch nd bind in line up to 9/16. Using the best
More informationJFI2089WTS Panel Dimension Guide 3/4 Overlay Panel Dimensions
These dimensions are for the overlay panels. Dimensions are in inches. DESCR HEIGHT WIDTH THICKNESS 3/4 Overlay Panel Dimensions Upper Overlay Panels 1/4" 36 " 1/4" 17 7/8" 17 7/8 3/4" 16 17 7/8 3/4 15
More informationRoller chains. Roller chains
re chrcterised by n bove-verge service life due to excellent wer resistnce, high consistency, mtchless precision nd considerbly higher breking strength nd ftigue strength thn required by DIN/ ISO stndrd.
More informationMetropolitan Construction Speci ication
& KITCHEN BEYOND Metropolitan Construction Speci ication Doors and drawer front: Doors on the Metropolitan line are made of solid wood rails with a MDF/veneered center panel to reduce the possibility of
More informationNORTH STAR 4-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T Phone: (519) 637-7899 Toll Free: (800) 65-5701 Fax: (519) 637-3403 Web Site: www.northstarwindows.com NORTH STR 4-PNEL PTIO DOOR SSEMLY INSTRUCTIONS (JN/P-Dr04/4Panssy
More informationProgram Door and Drawer Front Specifications
Program Door and Drawer Front Specifications The following specifications are for CRP-10 and TW-10 Program doors, and 3/" thick Slab and 1" thick #10 Program drawer fronts. These designs receive modified
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since
More informationJeff Branch WOODWORKING YOU CAN BUILD A. By adding subtle design elements, a traditional furniture style becomes decidedly modern.
Jeff Branch WOODWORKING YOU CAN BUILD A By adding subtle design elements, a traditional furniture style becomes decidedly modern. Jeff Branch WOODWORKING Publisher: Jeff Branch Editor: Jeff Branch Art
More informationRETRACTABLE SCREEN ASSEMBLY AND INSTALLATION INSTRUCTIONS. SINGLE OUTSWING (Retro) / (Full-Size) STEP 1: REVIEW & CHECK FIG.
STEP 1: REVIEW & CHECK ) CONFIRM DOOR HEIGHT & WIDTH You have purchased a SINGLE Retractable Screen for an INSWING door. HEIGHT: This unit is available in two sizes: Retro and Full-Size. Please make sure
More informationOUR SIMPLICITY PRODUCT LINE
2017 MERILLT BSICS SPEC BOOK DDENDUM 2017 OUR SIMPLICITY PRODUCT LINE 18 20 ½ W1518 - W2421 23 ½ W1824 - W2424 Wall Single Door Wall Cabinets C 18 High W1518 R or L W1818 R or L 20 1/2 High W2421 R or
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Multi Line 6 x8 255x193x203cm / 100 1 /2 x76 x80 Poly-Tex, Inc. PO Box 458 27725 Dnville Avenue Cstle Rock, MN 55010 We Site: www.poly-tex.com English - 69717 Hoy Greenhouse Service
More informationMOVENTO. The Evolution of Motion
The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer
More informationPacking List MODEL TEL-IAL-481 For Inactive Leaf TRIDENT double door
Items: SECURITECH GROUP, INC. MP uxiliary POLICE LOCK Packing List MODEL TEL-IL-481 For Inactive Leaf TRIDENT double door Items with * are pre-installed or assembled Fasteners: Part# Qty Name Description/Usage
More informationSeven Sisters. Visit for video tutorials
Seven Sisters This imge is from www.quiltstudy.org. Plese visit this website for more informtion on Seven Sisters quilt ptterns. Visit www.blocloc.com for video tutorils 1 The Seven Sisters design cn be
More informationHarmer Roof Drainage The Modulock Raised Deck Support Ranges
Modulock Rised Deck Supports - Introduction Hrmer Roof Dringe The Modulock Rised Deck Support Rnges Fully engineered, verstile, rised deck product rnges, Modulock Pedestl nd Modulock Uni-Ring, re idel
More informationShip Cable Trays and Ladders. Ship Cable Trays System Height: H15 mm Width: mm 2 types of perforations
Ship Cble Trys nd dders Ship Cble Trys System Height: H mm : 7-0 mm 2 types of perfortions Ship Cble dders System Height: H nd H mm : 00-000 mm 2 types of rungs Exmples of Components of Cble dder System
More informationRadiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7
RADIANT CEILING SYSTEM Description is rdint ceiling/wll system relized with 600x1200 mm EPS200 preformed pnels coted with 0,3 mm luminium thermo-conductor sheets, where the plstic pipe with n externl Ø
More informationModern Farmhouse Printer Cabinet. Addicted2DIY.com
Modern Farmhouse Printer Cabinet Addicted2DIY.com Before beginning this project please read through all of the plans as well as the blog post associated with this project. Always use safety precautions
More information129 KITCHEN BASE CABINET 480
129 KITCHEN BASE CABINET 480 There are two sorts of kitchen cabinets: base cabinets, which sit on the floor, and wall cabinets. Base cabinets provide both storage space and work surfaces. They often house
More informationSteel Stud Systems 1800 STUDCO. Studco Stud Fits positively into track. External Infill Framing Between concrete and steel structures
Steel Stud Systems Studco Stud Fits positively into trck Externl Infill Frming Between concrete nd steel structures 32 Service Holes Bell-mouthed service holes t 500mm centres do not require grommets for
More informationDOWNLOAD PDF HOW TO BUILD KITCHEN CABINETS, ROOM DIVIDERS, AND CABINET FURNITURE
Chapter 1 : How To Build Kitchen Cabinets Room Dividers Furniture Donald Brann DIY ebay How to Build Kitchen Cabinets, Room Dividers, and Cabinet Furniture [Donald R. Brann] on blog.quintoapp.com *FREE*
More informationWETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850
WETROOM WALK-IN AWL500 AWL00 AWL900 AWC850 INSTALLATION PARTS LIST MODEL: AWL500 AWL00 AWL 900 MODEL: AWL500 + AWC850 AWL00 + AWC850 AWL 900 + AWC850 03 AF /6 IMPORTANT Before disposing of crton nd/or
More informationSeries Door with In-Line Panel (GIH / AHD)
600 7000 Series oor with In-Line Pnel (GIH / H) H900 P H 083 JM C 781 HR 716 HR / SILL ISRT H900 P H F H170 MGTIC STRIP H900 P H 083 JM H5195 STTIG LOCK VRTICL VIYL GLZIG X Y Z HORIZOTL VIYL GLZIG FRM
More informationUltimate Flip Lever Astragal Prehanger Installation Instructions
Ultimte Flip Lever Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Tpe Mesure Kit Includes: Full Astrgl Full Length Trim Strip Screw Pck Field Pck
More informationFirst Round Solutions Grades 4, 5, and 6
First Round Solutions Grdes 4, 5, nd 1) There re four bsic rectngles not mde up of smller ones There re three more rectngles mde up of two smller ones ech, two rectngles mde up of three smller ones ech,
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationASSEMBLY INSTRUCTIONS 5PC Storage Dining Set
ASSEMLY INSTRUTIONS 5P Storge Dining Set Sers Stock # 56170 VL Stock #07-2204 U S T O M E R S E R V I E I N F O R M AT I O N Victory Lnd Group, Inc 1350 Munger Rd rtlett, IL 60103 WE: http://www.victorylndgroup.com
More informationTUR DOORS SHOWER DOORS
TUR DOORS SHOWER DOORS INSTALLATION INSTRUCTIONS TUB DOORS: LBTDB6062 SHOWER DOORS: LBSDB4876 LBSDB6076 VERSION: 3.2 PREPARATION FOR INSTALLATION TUB DOORS SHOWER DOORS PREPARATION FOR INSTALLATION READ
More informationWALL UNIT. Assembly Guide Tall 1 Door. 200 Tall. 350 Tall. 150 Tall. 300 Tall. 400 Tall. 450 Tall. 500 Tall. 600 Tall
WLL UNIT ssembly uide 150 Tall 200 Tall 300 Tall 350 Tall 400 Tall 450 Tall 500 Tall 600 Tall or Internal Use: I.WR.INS.045_WKIN00130_WLL_150_600_Tall_1Dr_Rev3.indd WLL UNIT ssembly uide EORE YOU STRT
More informationpage
NEW Products Mugs + tblewre Outdoor + cushions + kitchen Sttionery + wll rt Your bespoke design NEW Stndrd designs Food + Drink Multi-loction + Literry Corner Witty Britin Wether + Stts pge 02 03 04 05
More informationSOLO Concealed Runners for wood drawers
SOLO Concealed Runners for wood drawers Perfecting motion Table of contents Application Chart Drawer Thickness Cabinet type Load Capacity 5/8" 3/4" Frame Panel Dynamic Static Page SOLO 262H 75 lb. 100
More information* * 98/9949 CS 98/ Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970734* 23970734 98/9949 CS 98/9949 Instlltion Instructions This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Also covered is the CS
More informationMedia Console Table 38"
Copyright 2016 Shanty-2-Chic.com Media Console Table A sleek, modern take on a traditional concept; this console table is as stylish as it is functional and you'll have it done in a weekend. And versatile
More informationBE$T VALUE CLOSETS QUICK SHEET 12/8/10
E$T VLUE LOSETS QUIK SHEET 12/8/10 FETURES OF LOSET INETS: Melamine, 3/4 thick or irch Plywood as per color selected lassic Raised Panel Rigid Thermafoil drawer fronts for melamine; 5-piece wood for birch
More informationNEXUS SERIES CABINETS
NEXUS SERIES CABINETS STANDARD BASE ASSEMBLY INSTRUCTIONS Also applies to: Galaxy Series, Nexus Series, Ridgeline Series, Statesman Series, and Waterford Series FOR YOUR INFORMATION: These assembly instructions
More information670 Freestyle/Style Door with In-Line Panel
M 670 Freestyle/Style oor with In-Line Pnel Style Series Option Metl HK87 Slide MGNETIC PULL HNLE KIT with Mgnet Vinyl 083 JM E 989 MGNETIC OOR STOP N H900 PN HE SCREW C (CUH or MG) 781 HEER 716 HEER /
More informationHow to Build a Recessed Medicine Cabinet
How to Build a Recessed Medicine Cabinet See post for install info http://www.hertoolbelt.com/recessed-medicine-cabinet/ Materials 6 Inset Cabinet Door Hinges 3 Latches 1 sheet Beadboard or 1/4 plywood
More information* * 98/9949WDC. 1-Point Latch (LBL) 2-Point Latch includes these additional parts. Customer Service
*24017501* 24017501 Coneled Vertil Devie for Wood Doors 98/9949WDC Instlltion Instrutions 1-Point Lth (LBL) 2-Point Lth inludes these dditionl prts NOTE: If door does not hve utout for ling inside lok
More informationSolutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs
AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches
More informationRETRACTABLE SCREEN ASSEMBLY AND INSTALLATION INSTRUCTIONS. DOUBLE INSWING (Retro) / (Full-Size) FIG. 1A STEP 1: REVIEW & CHECK FIG.
STEP 1: REVIEW & CHECK ) CONFIRM DOOR HEIGHT & WIDTH You have purchased a DOUBLE Retractable Screen for an INSWING door. HEIGHT: This unit is available in two sizes: Retro and Full-Size. Please make sure
More informationSTANDARD. Drawer runner program. Perfecting motion.
STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance
More informationPROJECT PLANS EXPANDABLE CRAFT CENTER
R PROJECT PLANS EXPANDABLE CRAFT CENTER Whether you re working on craft projects, sewing, or pursuing another hobby, this craft center offers a great place to work. It features a large work surface that
More informationPlans. Easy-to-Build Full-size Deluxe Murphy Bed Plan. For more plans, tools and hardware visit rockler.com
Easy-to-Build Full-size Deluxe Murphy Bed Plan Build a full-size Deluxe Murphy Bed complete with decorative molding and matching side cabinets! Plans For more plans, tools and hardware visit rockler.com
More informationARK CHEVRON INSTALLATION GUIDE
ARK CHEVRON INSTALLATION GUIDE THANK YOU FOR YOUR PURCHASE OF DUCHÂTEAU WALL COVERINGS. We recommend you hire n experienced finish crpenter or wood flooring instller to chieve qulity results with ll DuChâteu
More informationClassic Bath Designs, Inc. SUN VALLEY CALIFORNIA
APRON TYPICAL CABINET LAYOUTS A B C D E TYPICAL LAY-OUTS FOR 24" TO 30" CABINETS. THESE CABINET SIZES CAN ONLY ACCOMODATE BASE DRAWERS. APRON DRAWERS ARE NOT AVAILABLE F G H I TYPICAL LAY-OUTS FOR 36"
More information(1) 2x4 Ft. Sheet of ¼-inch Plywood. 1 ¼-inch Wood Screws. 1 ¼-inch Brad Nails ¾-inch Brad Nails Wood Glue CUT LIST:
MATERIALS: (5) 1x3x8 Ft. Boards (3) 2x4x8 Ft. Boards (10) 1x4x8 Ft. Boards (1) 1x2x10 Ft. Board (1) 2x2x4 Ft. Board (2) 1x6x8 Ft. Boards (1) 4x8 Ft. Sheet of ¾-inch Plywood (1) 2x4 Ft. Sheet of ¼-inch
More informationIPA FITTINGS FOR REHAU NORDIC
IP FITTINGS FOR REHU NORDIC DESIGN PLUS 2017 /S J. PETERSENS BESLGFBRIK JCOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45) 98 35 15 00 3 FITTINGS FOR REHU NORDIC DESIGN PLUS Table of contents PGE REHU Nordic
More informationGENERAL NOTES 1600 SYSTEM NOTES STRUCTURAL SEAL NOTES 1 - HANDLING, STORING AND PROTECTING ALUMINUM MATERIAL. 2 - GENERAL RULES
GENERL NOTES 162-971 1 OF 12 THESE INSTLLTION INSTRUCTIONS RE SUPPLEMENT TO THE PPROVED SHOP DRWINGS. USE IN CONJUNCTION WITH THOSE DRWINGS. 1 - HNDLING, STORING ND PROTECTING LUMINUM MTERIL. THE FOLLOWING
More informationA great addition to Sub-Zero's complete line of
with Refrigeration Drawers Discreet lighting Full-view glass door (standard) Roller-assembly shelves UV-resistant glass Lighted electronic control panel Divider gasket Model 427R Lighted display shelf
More informationMATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR
MATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR INSTALLATION PARTS LIST MOWV MOWP MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454
More informationClassic Woodworking. Installation Guide SW Jacktown Rd, Beaverton, OR Toll Free (800) Phone (503) Fax (503)
Classic Woodworking Installation Guide 8160 SW Jacktown Rd, Beaverton, OR 97007 Toll Free (800) 322-2267 Phone (503) 692-0800 Fax (503) 692-7070 www.classicwoodworking.com Table of Contents Overview 2
More informationInstallation Guide. wibenchmfg.com
Installation Guide wibenchmfg.com Overview Introduction Shipment Problems Page Shipment Problems 2 Backcharges Policy 2 Who Furnishes What 2 Building Condi ons 2 Quick Tips 3 Product Receiving Procedures
More informationLEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.
Section I - Instlltion Preprtion Prt Numer: 0854-53830 Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts
More informationGE Monogram 36" Built-In All-Freezer
SETION 1 FLUSH INSET INSTLLTION SETION 2 STNR INSTLLTION 1/4" FRME PNELS 3/4" OVERLY PNELS OVERLL IMENSIONS FLUSH INSET INSTLLTION 38" (96.5) 25 7/8" (65.7) 20 5/8" (52.4) 10 5/16" (26.2) *8 (212.1) *73
More informationTHE CONSOLIDATED CABINETS
THE CONSOLIDATED CABINETS DOOR STYLES COLOR DISCLAIMER Due to the limitations of desktop scanners and the relative inconsistencies of various display monitors, the colors you see on your screen may not
More informationHow to Build Your Custom Teardrop Camper. 5 x 10 Trailer. 5 Tall Cabin
How to Build Your Custom Teardrop Camper 5 x 10 Trailer 5 Tall Cabin Contact: hennesseystealth@bigteardrop.com http://www.bigteardrop.com ebay Seller ID: hennesseystealth1957 United States Copyright TXu
More informationLarge Commercial Trunking
Lrge Commercil Trunking 3.2 CONTENTS Lrge Commercil SIGNO BK - PVC-U...................3.7 Trunking 110x70 to 220x70mm SIGNO BA - Aluminium............... 3.13 110x70 to 220x70mm SIGNO BS - Steel...................
More informationDisplay/Accessory Furniture
1 Multimedia Display End-of-Range, 60-013-S00 End-of-range displayer has five 59 1 /2" 19 3 /8" 16" 163 Sloped Shelving Book Displayer sloping shelf spaces for displaying books spine out at an angle for
More informationTHIS WORKHOLDING PACKAGE IS DESIGNED FOR HAAS HRT210 & HRT210SP ROTARY TABLES (ROTARY TABLE NOT INCLUDED WITH PACKAGE) INTRODUCTION
INTRODUCTION THIS WORKHOLDING PCKGE IS DESIGNED FOR HS HRT210 & HRT210SP ROTRY TBLES (ROTRY TBLE NOT INCLUDED WITH PCKGE) PRODUCT INFORMTION PCKET (PIP) FOR WORKHOLDING PCKGE 2/12/2009 1 OF 7 (800) 332-4425
More informationGeneral Instructions 03HEL1010DDFW-V3. Please retain product label and instructions for future reference. 10x10 Helios Summer House
Generl Instructions Plese retin product lel nd instructions for future reference 03HEL1010DDFW-V3 x2 All uilding s should e erected y two dults Winter = High Moisture = Expnsion Summer = Low Moisture =
More informationWood Casework Construction Details
CASEWORK CONSTRUCTION DETAILS Overview Cabinets Mott casewk can meet the most demanding specification, whether it is AWI Premium an architect's 'signature' specification. We manufacture using premium grade
More informationWALL UNIT. Assembly Guide For Internal Use: FI.WR.INS.034_WKIN00124_WALL_ _1Dr_Rev4.indd
WLL UNIT ssembly uide 150 200 350 400 500 300 450 600 or Internal Use: I.WR.INS.034_WKIN00124_WLL_150-600_1Dr_Rev4.indd WLL UNIT ssembly uide EORE YOU STRT INSTLLTION SHOULD E PERORMED Y OMPETENT PERSON
More informationCANOPY SYSTEMS PAGE 1 OF 14
NOPY SYSTEMS PGE 1 OF 1 SY 092 I N S T L L T I O N I N S T R U T I O N S RED REFULLY! minimum of of two persons are required to install canopies. Do not step on base shelves... to avoid damage:. Do not
More informationSUMMIT HUTCH ASSEMBLY HARDWARE WALL MOUNTING HARDWARE TOOLS REQUIRED COMPONENTS. 4 - large. 4 - bolts 4 - flat 4 - spring small screws.
SSEMBLY HRDWRE Missing hardware? Please call 800.606.6387 for replacements. 20 - small 4 - large 4 - bolts 4 - flat 4 - spring washers washers 8 - shelf pins 4 - cam 4 - cams 2 - connecting brackets WLL
More informationProduct Spec Sheet & Order Form
Product Spec Sheet & Order Form 7601 E. Treasure Dr Ste 2120 North Bay Village, - FL 33141 Ph: 305-9991543 Email:info@steelkitchenweb.com Web:www.steelkitchenweb.com MODULAR KITCHEN CABINETS Material Specs:
More informationPROJECT PLAN TOOL CHEST
BUILD IT WITH ROCKLER PROJECT PLAN TOOL CHEST FEATURING ROCKLER S BUILD QUESTIONS? Go to www.rockler.com or call 800-279-4441 Stock # Item 63420 1/4" x 24" x 30" Baltic Birch Plywood 63446 1/2" x 24" x
More informationWHITE SHAKER SPECIFICATIONS:
WHITE SHAKER SPECIFICATIONS: Solid Birch Frame with MDF Centre Panel Glue & Staple or Metal Clip Assembly Full Overlay Doors and Drawers Undermount Full Extension Soft Close Drawer Glides Concealed European
More informationDIY Farmhouse Cabinet
DIY Farmhouse Cabinet Addicted2DIY.com *Before beginning this project, please read through all of the plans as well as the blog post associated with this project. Always use safety precautions whenever
More information