QUALITY HARDWOOD & IRON STAIR PARTS

Transcription

1 QUALITY HARDOOD & IRON STAIR PARTS T E M S complete S T A I R A S E S Y S TO STAIRTRENDS

2 Inside This atalog the bottom square of the baluster and the turned portion aligns on each tread. alusters have a fi xed dowel pin and should be trimmed from the top. the bottom square and the turned portion of the baluster align with the rake (rise) of the stairway. These balusters have a loose dowel pin and should be trimmed from the bottom. The turned portion of the baluster remains the same for all baluster sizes. Starting a Staircase System...3 Post to Post...4 Over the Post...5 aluster Index Standard Hardwood aluster & Post Selections olonial Series Traditional Series Hampton Series Tulliere Series Morning Glory Series ontemporary Series...18 ox Newels ox Newels Limited Reserve ollection ountry oods Series...21 yron Series Kings ourt Series Malvern Series Mercer Series oodbury Series Lomond Series...32 Sussex Series...33 Hand arved Series Iron alusters Finishes ½ Square Iron alusters Decorative Series Designer alusters & Panels Series Knuckle Series Twist & asket Series...41 Scroll & Unique Series...42 Ribbon Series...43 Twist & asket ollarless - 41 Series elly alusters - 40 Series Square Iron alusters Gothic Hammered Series Santa Fe Forged Hammered Series...46 all Hammered Series...46 Old English Forged Hammered Series...46 Scroll Forged Hammered Series Tudor Forged Hammered Series Round Iron alusters Roman Round ½ Series...48 Arrow Round 9 16 Series...48 Gothic Round 9 16 Series...49 Venetian Series 5 8 Series...49 Iron Newels Matching Iron Newels...49 ¾ Square Iron alusters MEGA alusters Series...50 Iron Accessories Handrail rackets...39 Knuckles Iron Shoes ½ Square...41 Installation Products...43 Iron Shoes Universal ½ & 9 16 Sq Iron Shoes 9 16 Square Iron Shoes ½ & 9 16 Round...48 Iron Newel Kit & 5 8 Shoes...49 Iron Shoes MEGA ¾ Square...50 ood Accessories Handrails...52 Handrail Fittings all Rails, Rosettes & Accessories...55 Starting Steps...56 Treads, False Ends & Mouldings...57 Installation Hardware...58 Stairway Take-Off Notes

3 STARTING A STAIRASE SYSTEM The fi rst step in creating your stair system is choosing between an over the post or a post to post system (see pages 4 and 5). Over the post system hoose a wood or metal baluster design from pages 6 and 7. Move to the catalog page that features that baluster. For wood balusters choose a rail from the list on the left side of each baluster page. For metal balusters choose a rail from page 52. hoose your newels pictured with the baluster designs. If your stair begins with a starting step go to page 56. If you chose the Over-the-Post system then select the appropriate fi ttings from pages 53 and

4 SELETION GUIDE POS T TO POS T Starting Newel 5 Top Square Stair racket Half Newel Intermediate Landing Newel, 14 Top Square all Rail 2nd Floor Newel, 11 Top Square Starting Newel 5 Top Square Oval Rosette (2205A) Starting Newel 5 Top Square Over Easing, Returned End (2#03R) Post to Post onfigurations Starting Newels Landing and Angle Newels 2nd Floor Newels Starting Newel no Fitting Starting Newel with Fitting Landing Newel (14 Square) no Fitting Angle Newel (5 Square) with Fitting 2nd Floor Newel (11 Square) no Fitting Starting Newel at 2nd Floor (5 Square) with Fitting ood Specie Selection Alder eech razilian herry herry Hickory Hard Maple Mahogany 4

5 SELETION GUIDE Gooseneck (2#28) with ap Round Rosette (2205) Starting Easing (2#00) Starting Newel Landing Newel Left Hand Turnout (2#14 or 2#14A) Gooseneck (2#28) with ap Over Easing (2#03) Left Hand Volute (2#10) Volute Newel Landing Newel Left Hand (2#26) Gooseneck with ap Right Hand (2#23) Gooseneck No ap Tread with Return 2 Riser Right Hand Gooseneck with ap (2#19) Right Hand Turnout (2#15) or (2#15A) Turnout Newel Double ullnose Starting Step Level Quarterturn with ap (2#09) Landing Newel Half Newel OVER THE POS T Handrail Fittings LH Volute LH Turnout Starting Easing Maple Oak (Red) Poplar Prime hite alnut hite Oak 5

6 OOD ALUSTER INDEX Model # s are in white Model # s are in yellow ¼ sq Pg Pg ¼ sq Pg ¼ sq Pg ¼ sq Pg ¼ sq Pg Pg F Pg Pg F Pg Pg Pg ¼ sq Pgs 8, ¼ sq Pg ¼ sq Pg ¼ sq Pg ¼ sq Pgs 8, ¼ sq Pg Pg Pg F Pg F Pg FG Pg P Pg Pg ¼ sq Pg ¼ sq Pg Pg Pgs 8, 10 IRON ALUSTER INDEX 4341 Pgs 8, P Pg P Pg Pg Pg Pg Pg T Pg T Pg F Pg F Pg 14 1ASK44 Pg 41 1ASK-LY Pg 44 1KNU44 Pg 40 1RI44 Pg 43 1T40-LY Pg 44 1T22 Pg 41 1T44 Pg 41 2ASK44 Pg 41 2KNU1ASK44 Pg 40 2KNU44 Pg 40 2RI44 Pg 43 2T44 Pg 41 R101 Pg 41 R102 Pg 41 R161 9/16 Pg 45 R801 Pg 43 R802 Pg 43 KNOT44 Pg 42 M-1-41 Pg 44 M-2-41 Pg 44 M-3-41 Pg 44 M-4-41 Pg 44 M-5-41 Pg 44 M321 Pg 42 M34044 Pg 41 M39944 Pg 38 M40144 Pg 40 M40244 Pg 40 M40840 Pg 40 M41144 Pg 40 M501 Pg 42 M55541 Pg 39 M601 Pg 42 M8044 Pg 43 M8544 Pg 43 M9044 9/16 Pg 46 MDS Pg 42 MHDS 9/16 Pg 47 MSS 9/16 Pg 42 PLA40-LY Pg 44 PLA44 Pg 41 R /16 Pg 48 R /16 Pg 48 RENPANEL Pg

7 Limited Reserve ollection Hand arved Y05 Pg 22 Y15 Pg 22 Y25 Pg 22 Y06 2 sq Pg 22 Y26 2 sq Pg Pg 21 15E-F Pg 21 K05 Pg 24 K15 Pg 24 K05-R Pg 24 K15-R Pg 24 K05-8 Pg 24 K15-8 Pg 24 LM05 Pg 32 ME05 Pg 28 ME15 Pg 28 ME05-1T Pg 28 ME15-1T Pg 28 MV05 Pg 26 MV15 Pg 26 MV15 Pg 26 MV05- OPEN-F 2 sq Pg 26 MV15- OPEN-F 2 sq Pg 26 MV05-SQ Pg 26 MV15-SQ Pg 26 MV05-2RI Pg 26 MV15-2RI Pg 26 SS05 Pg 33 SS05-1AR Pg 33 SS05-1RI Pg Pg Pg AR Pg AR Pg RI Pg RI Pg RI Pg RI Pg OPEN-T Pg OPEN-T Pg 30 A1 Pg 36 G2 1¼ sq Pg 36 M /16 Pg 46 M /16 Pg 46 M /16 Pg 46 M /16 Pg 46 M /16 Pg 46 M /16 Pg 46 M /16 Pg 47 M /16 Pg 47 M /16 Pg 47 M /16 Pg 47 M /16 Pg 47 M /16 Pg 45 M /16 Pg 45 M /16 Pg 45 M /16 Pg 45 M19044 Pg 45 M20044 Pg 45 M301 Pg 42 M /16 Pg 47 M305 9/16 Pg 47 M308 9/16 Pg 47 M310 9/16 Pg 46 M331 Pg 42 R /16 Pg 48 R /16 Pg 48 R /16 Pg 49 R /16 Pg 49 R /16 Pg 49 R60044 Pg 48 R60144 Pg 48 R60244 Pg 48 R61144 Pg 48 R61244 Pg 48 R /8 Pg 49 R /8 Pg 49 R /8 Pg 49 R /8 Pg 49 AVE44 Pg 42 MEGA- PLA 3/4 Pg 50 MEGA- 1T 3/4 Pg 50 MEGA- 2T 3/4 Pg 50 MEGA- 1ASK 3/4 Pg 50 MEGA- 2ASK 3/4 Pg 50 MEGA- M501 3/4 Pg 50 MEGA- M601 3/4 Pg 50 MEGA- 1KNU 3/4 Pg 50 MEGA- 2KNU 3/4 Pg

8 OLONIAL SERIES Handrails ALUS TERS Options: Fluting add -F Reeded add -R Fluted 5015-F 5141-F Reeded 5208 ON THE LEVEL ON THE RISE Thickness (Square) 1¼ 1¼ 1¾ 1¾ 5015-R 5141-R Available Lengths: 31, 34, 36, 39, and 42 The height of the bottom square and the turned portion stays the same for all baluster heights. The turned portion is always parallel to the tread. alusters are trimmed from the top. For rail specifi cations see page 52. ottom Rails 5210 Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin) ¾ ¼ 1¼ ¾

9 OLONIAL SERIES Over the Post NEELS VOLUTES/ TURNOUTS 3200A A A 3222A Newels STARTING Height Turning Length ottom lock idth 3200A Newels Height Turning ottom Length lock VOLUTE/TURNOUT (Adjustable) idth LANDING 3210A ANGLE (INDER) ottom VOLUTE (Use ith limbing Volute) 3221A /8 3 TURNOUT (Old ode 30-34) 3222A ½ To use 3221A for code specify a climbing volute 2210L, 2211L, 2810L, 2811L 3200A A A A Post to Post Finial A Posts STARTING Height A Top lock Turning Length ottom lock idth Starting newel w/fitting Starting newel no fitting Newels with an 11 top square are for 2 nd floor landings when NOT using fittings. alcony rail heights will be 36 when using this newel ¼ 20¾ 19½ 3¼ ¼ 20¾ 25½ 3¼ 2ND FLOOR LANDING ¾ 27¾ 3¼ INTERMEDIATE LANDING ½ ¼ ANGLE (INDER) ¼ 20¾ 43½ 3¼ Angle newel w/fitting Newels with an 14½ top square are for intermediate landings when NOT using fittings or for 2 nd floor landings and balcony rail heights over

10 TRADITIONAL SERIES Handrails Options: Fluting add -F Reeded add -R Fluted F 5035-F 5141-F Reeded ON THE LEVEL ON THE RISE Thickness (Square) 1¼ 1¼ 1¼ 1¼ 1¼ 1¾ 1¾ 5015-R 5141-R The height of the bottom square and the turned portion stays the same for all baluster heights. The turned portion is always parallel to the tread. alusters are trimmed from the top. For rail specifi cations see page 52. ottom Rails Available Lengths: 31, 34, 36, 39, and ¾ ¼ 1¼ Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 1¾

11 TRADITIONAL SERIES Over the Post NEELS VOLUTES/ TURNOUTS Newels 3207A 3217A 3218A STARTING Height Turning Length ottom lock idth 3207A / / 16 3 LANDING 3217A / / 16 3 ANGLE (INDER) 3218A / / 16 3 ottom Newels Height Turning Length ottom lock VOLUTE/TURNOUT (ode 34-38) idth / 8 9 2¾ VOLUTE (Use ith limbing Volute) ¼ 5 7/ 8 2¼ / 8 4 2¾ TURNOUT (Old ode 30-34) / 8 9 3/ 8 2¼ ¾ 4 2¾ To use 3205 or 3260 for code specify a climbing volute 2210L, 2211L, 2810L, 2811L 3207A 3217A 3218A Post to Post PLAIN ALL TOP Finial A Finial A Enhance Your Newels Upgrade your newels from 3 to 4 thick. Posts STARTING all Top Posts Height A Top lock Turning Length ottom lock idth ¼ ¼ N/A N/A N/A 3 2ND FLOOR LANDING ¼ 26¼ ¼ 32¾ 3 INTERMEDIATE LANDING ½ 18¼ 28¼ 3 ANGLE (INDER) ¼ 41 3 Yellow numbers denote available in enhanced models

12 HAMPTON SERIES Octagon Octagon Handrails Options: Fluting add -F Fluted F 5300-F 5030-F 5070-F ON THE LEVEL ON THE RISE * Thickness (Square) 1¼ 1¼ 1¾ 1¾ 1¾ 1¾ 4266 and 4275 may be ordered in 2 thickness: specify 4366 and Available Lengths: 31, 34, 36, 39, and 42 The height of the bottom square and the turned portion stays the same for all baluster heights. The turned portion is always parallel to the tread. alusters are trimmed from the top. Available Lengths: 34, 38, and 42 *(4265 balusters also available in 30 and 36 for stringer applications) The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). DIVIDER SPINDLE Available in 1¾ x For rail specifi cations see page 52. ottom Rails ¾ ¼ 1¼ ¾

13 HAMPTON SERIES Over the Post Octagon NEELS VOLUTES/ TURNOUTS Enhance Your Newels Upgrade your newels from 3¼ to 3¾ thick. Newels STARTING Newels (Octagon) Height Turning Length ottom lock idth ¾ 16¼ 3¼ ¾ 21¾ 3¼ LANDING ¾ 35¼ 3¼ VOLUTE/TURNOUT (ode 34-38) /8 3¼ VOLUTE (Use ith limbing Volute) /8 85/8 3¼ TURNOUT (Old ode 30-34) /8 9½ 3¼ To use 3294 for code specify a climbing volute 2210L, 2211L, 2810L, 2811L Yellow numbers denote available in enhanced models. ottom Post to Post Octagon PLAIN Finial A OTAGON Finial A A (suffi x) Spade Top OL (suffi x) olonial Top RT (suffi x) Round Top # #99 3#93 3#91 3#95 Posts Posts (Octagon) Height STARTING A Top lock Turning Length ottom lock idth ½ ½ 17½ 201/8 3½ ½ 17½ 281/8 3½ 2ND FLOOR LANDING ½ ½ 23¾ 3½ INTERMEDIATE LANDING ½ ½ 17½ 201/8 3½ Yellow numbers denote available in enhanced models. Newels may be ordered 3 thick (example: ) Available post tops for 3289, 3290, Include the suffi x after the model number when ordering. Enhance Your Newels Upgrade your posts from 3½ to 4½ thick OL 3290-OL 3291-OL

14 TULLIERE SERIES Octagon Twist Fluted Octagon Twist Fluted Handrails ON THE LEVEL ON THE RISE 2015-P T 2015-F 2005-P T 2005-F Thickness (Square) 1¾ 1¾ 1¾ 1¾ 1¾ 1¾ 1¾ 1¾ The height of the bottom square and the turned portion stays the same for all baluster heights. The turned portion is always parallel to the tread. alusters are trimmed from the top. For rail specifi cations see page 52. ottom Rails 5260 Available Lengths: 31, 34, 36, 39, and 42 1¾ ¾ 5241 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin) Available Lengths: 34, 38, and

15 TULLIERE SERIES Over the Post Octagon Twist Fluted NEELS VOLUTES/ TURNOUTS 3#00 3#10 3#27 3#60 Plain Newels STARTING Octagon Newels Twist Newels Fluted Newels Height Turning Length ottom lock idth ½ ½ LANDING ½ ANGLE (INDER) ottom ½ VOLUTE/TURNOUT (ode 34-38) - ADJUSTALE 35## ¼ 12 7/8 3½ series 36## series 38## series 39## series Post to Post Octagon Twist Fluted Top locks Finial A 5 5 3#42 3# #42 3#45 3#46 3#55 Posts Octagon Posts STARTING Twist Posts Fluted Posts Height A Top lock Turning Length ottom lock idth ½ 3#45 5 2ND FLOOR LANDING ½ INTERMEDIATE LANDING ½ ½ 3½ 3#

16 MORNING GLORY SERIES Handrails Reeded Reeded Reeded Reeded ¼ Sq 1¼ Sq 1¼ Sq 1¾ Sq 1¾ Sq 1¾ Sq 1¼ Sq 1¼ Sq 1¾ Sq 1¾ Sq Options: Fluting add -F Fluted Available Lengths: 34, 38, and F 1475-F 5900 For rail specifi cations see page 52. ottom Rails ¾ ¼ 1¼ ¾

17 MORNING GLORY SERIES Over the Post Reeded Reeded NEELS VOLUTES/ TURNOUTS Newels STARTING Newels (Reeded) Height Turning Length ottom lock idth ½ LANDING ½ ANGLE (INDER) ottom ½ VOLUTE/TURNOUT (ADJUSTALE) ½ Newels may be ordered 3 thick (example: ) Reeded Newel Post to Post Reeded PLAIN Finial A REEDED Finial A Top locks 3# Posts STARTING Posts (Reeded) Height A Top lock Turning Length ottom lock idth ½ 3½ 3#45 2ND FLOOR LANDING ½ 14 INTERMEDIATE LANDING ½ 3½ ½ 3½ 3#46 Newels may be ordered 3 thick (example: )

18 ONTEMPORARY SERIES hamfered Fluted hamfered & Fluted hamfered & Grooved hamfered, Fluted & Grooved Fluted & Grooved 6 V-Grooved 9 V-Grooved Rails Thickness 1¼ F 4245-F 4245-G 4245-FG 4245-FG - - 1½ ¾ F 4255-F 4255-G 4255-FG 4255-FG P P evel Top Newels hamfered Fluted hamfered, Fluted & Grooved 5275 Height Newels Height idth STARTING ½ ND FLOOR LANDING & ANGLE ½ Newels may be ordered 3 thick (example: ) NOTE: Most newels are available with the same milling options as the balusters F 4001-F 4000-FG 6100P For rail specifi cations see page 52. ottom Rails ¼ ¾

19 OX NEELS Series 3 3⅛ Series 4 Use with any aluster Style 6 V-Grooved 9 V-Grooved Fluted Flat Panel Raised Panel 6¼ 7⅜ 249/16 66¾ 53 57⅜ ½ Sq Sq 7201ADJ Adjustable 4½ Sq P P FP 7095-RP Series 6 Use with any aluster Style 6 V-Grooved 9 V-Grooved Fluted Flat Panel Raised Panel Removable ood Panels (shown with Iron Insert Package) 9 23 Series 6 ox Newels include both Peak and Flat aps ¼ Sq P P FP 7205-RP 7206 MORE OX NEELS ON THE NEXT PAGE. The 7206 (6¼ x 5 L) is available in Red Oak, Poplar, Hard Maple, herry and Alder. Each newel includes: removable fl at wood panels and loose stops. Order separately our iron insert packets in your choice of seven fi nishes (pyramid iron cap included) or create your own inserts: including iron, wood, or glass. 19

20 OX NEELS Series 7 Use with any aluster Style 6 V-Grooved 9 V-Grooved Fluted Flat Panel Raised Panel 7⅜ 249/16 533/16 21¼ 7½ Sq P P FP 7405-RP Mixed Specie Main newel with raised or fl at panels in a different specie. Main newel with a cap in a different specie. Main newel with molding in a different specie. Top lock Panels Options 2 Top Panel Top Panel ustom ox Newels Series 4, 6 or 7 can be customized for your building project. Add panels below the cap and above the top moulding. The panels can be on two or three sides. (your choice of which sides). Mix your species. The panels can have one specie and the box newel can be of another. The moulding and cap can either match the panel or the box newel specie. The sticking around the panels can be Shaker Style (square) or olonial (round) The panel between the mouldings can be divided into two or more panels. EZ Mount ase lock System EZ-01 kit is available for Series 6 (included) and Series 7 (option) ox Newels. Includes base block, lag screws and washers. 3 Top Panel Shown with 2 panels per side Round Sticking Square Sticking All of our box newel panels are standard with Round Sticking... order optional Square Sticking. 20

21 Limited Reserve ollection OUNTRY OODS SERIES The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The ountry oods Series features clean lines and a modern look. Over the Post Fluted Fluted NEELS VOLUTES/ TURNOUTS Newels STARTING Height Turning Length idth ½ LANDING ½ ANGLE (INDER) ½ VOLUTE/TURNOUT (Adjustable) ADJ 3½ ottom E74-F E75-F E78-F 15 E15-F Thickness 1¾ Available Lengths 34, 38, and 42 Post to Post Fluted Finial A all Top Posts STARTING Height A Top lock Turning Length idth ½ ½ Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin) ½ ½ ½ 2ND FLOOR LANDING ½ INTERMEDIATE LANDING ½ 54½ 3½ F 82-F 85-F 86-F 21

22 YRON SERIES Limited Reserve ollection Handrails The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The yron Series focuses on a center ball detail and is offered in two unique versions: the standard and Euro styles. Euro style Euro style Options: Reeded all add -R Decorative ALUS TERS Y##-R Options: eapple all add -P Decorative 5226 ON THE RISE Y05 Y06 Y15 Y25 Y26 Thickness (Square) 1¾ 2 1¾ 1¾ 2 Y##-P 5310 Rounded For rail specifi cations see page 52. ottom Rails Available Lengths: Y25: 31, 34, 36, 39, 42 Y05, Y15, Y25, Y26: 34, 38, 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). NOTE: hen the Y25 is used for a balcony application then specify Y25-36, Y25-39 & Y25-42 (turnings centered on balcony balusters) ¾ ¾ Round Top and ottom locks Available 22

23 Limited Reserve ollection YRON SERIES Over the Post Euro style NEELS Euro Euro Euro VOLUTES/ TURNOUTS Euro Y74 YE74 Y75 YE75 Y78 YE78 Newels STARTING Height Turning Length ottom lock idth Y ½ YE ½ LANDING Y ½ YE ½ ANGLE (INDER) Y ½ YE ½ ottom Newels Y60 Height Turning Length YE60 ottom lock VOLUTE/TURNOUT (Adjustable) idth Y ADJ 3½ YE ADJ 3½ Y74 Y75 Y78 YE74 YE75 YE78 Options: Reeded all Top and enter all add -R Decorative Finial Post to Post EURO STYLE Finial Euro style A A Y##-R Y80 Y82 Y85 Y86 Y93 Y95 Y98 all Top Posts Height A Top lock Turning Length ottom lock idth STARTING Y ½ YE ¾ 16¾ 3½ Y ½ YE ¾ 26¾ 3½ Y ½ YE ¾ 30¾ 3½ Y ½ YE ¾ 41¾ 3½ Y ½ YE ¾ 46¾ 3½ 2ND FLOOR LANDING Y ½ 23½ 3½ YE ¾ 22¾ 3½ INTERMEDIATE LANDING Y ½ 16 38½ 3½ YE ½ 16¾ 37¼ 3½ Y80 Y82 Y93 Y95 Y98 YE80 YE82 YE93 YE95 YE

24 KINGS OURT SERIES Limited Reserve ollection Handrails The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The King ourt Series includes shapes reminiscent of ancient Greek urns and tapered pillar-like turnings. Reeded Octagon Reeded Octagon ALUS TERS 5226 ON THE RISE K05 K05-R K05-8 K15 K15-R K15-8 Thickness (Square) 1¾ 1¾ 1¾ 1¾ 1¾ 1¾ 5310 Rounded Available Lengths: 34, 38, and For rail specifi cations see page 52. ottom Rails 5260 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 1¾ ¾ Round Top and ottom locks Available 24

25 Limited Reserve ollection KINGS OURT SERIES Over the Post Reeded Octagon NEELS VOLUTES/ TURNOUTS K74 K75 K78 K60 Newels STARTING Height Turning Length ottom lock idth K ½ LANDING K ½ ANGLE (INDER) K ½ VOLUTE/TURNOUT (Adjustable)) K ADJ 3½ ottom K74 K75 K78 K74-R K75-R K78-R K74-8 K75-8 K78-8 Post to Post Reeded Octagon Finial A K80 K82 K85 K86 K93 K95 K98 all Top Posts STARTING Height A Top lock Turning Length ottom lock idth K ⅝ 3½ K ⅝ 3½ K ⅝ 3½ K ⅝ 3½ K ⅝ 3½ 2ND FLOOR LANDING K ½ INTERMEDIATE LANDING K ½ ½ K80 K82 K93 K95 K98 K80-R K82-R K93-R K95-R K98-R K80-8 K82-8 K93-8 K95-8 K

26 MALVERN SERIES Limited Reserve ollection Handrails The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The Malvern Series features a variety of some of our newest and unique milling options. Open Flute 2 Ribbon Square Open Flute 2 Ribbon Square ALUS TERS Shown straight on ON THE RISE MV05 MV05-OPEN-F MV05-2RI MV05-SQ MV15 MV15-OPEN-F MV15-2RI MV15-SQ Thickness (Square) 1¾ 2 1¾ 1¾ 1¾ 2 1¾ 1¾ Rounded For rail specifi cations see page 52. ottom Rails 5260 Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 1¾ ¾ Round Top and ottom locks Available

27 Limited Reserve ollection MALVERN SERIES Over the Post Open Flute Ribbon 2 Square NEELS VOLUTES/ TURNOUTS MV74 MV75 MV78 MV60 Newels STARTING Height Turning Length ottom lock idth MV ¼ LANDING MV ¼ ANGLE (INDER) MV ¼ VOLUTE/TURNOUT (Adjustable) MV ADJ 3¼ ottom MV74 MV75 MV78 Shown straight on MV74-OPEN-F MV75-OPEN-F MV78-OPEN-F MV74-2RI MV75-2RI MV78-2RI MV74-SQ MV75-SQ MV78-SQ Post to Post Open Flute Ribbon 2 Square Finial A MV80 MV82 MV85 MV86 Posts STARTING Height A Top lock Turning Length ottom lock idth MV ¾ 23 14½ 3¼ MV ¾ 23 20½ 3¼ 2ND FLOOR LANDING MV ¼ 19½ 26½ 3¼ INTERMEDIATE LANDING MV ¼ ¼ MV80 MV82 Shown straight on MV80-OPEN-F MV82-OPEN-F MV80-2RI MV82-2RI MV80-SQ MV82-SQ 27

28 MERER SERIES Limited Reserve ollection Handrails The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The Mercer Series is a sleek modern design that incorporates a decorative ball at the bottom block. 1 Twist 1 Twist ALUS TERS Options: eapple all Decorative all Ordering Example: ME05-1T-P 5226 ON THE RISE ME05 ME05-1T-P ME15 ME15-1T-P Thickness (Square) 1¾ 1¾ 1¾ 1¾ Rounded For rail specifi cations see page 52. ottom Rails 5260 Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). 1¾ ¾ Round Top and ottom locks Available 28

29 Limited Reserve ollection MERER SERIES Over the Post Twist 1 NEELS VOLUTES/ TURNOUTS ME74 ME75 ME78 ME60 Newels STARTING Height Turning Length ottom lock idth ME ½ LANDING ME ½ ANGLE (INDER) ME ½ ottom VOLUTE/TURNOUT (Adjustable) ME ADJ 3½ ME74 ME75 ME78 ME74-1T-P ME75-1T-P ME78-1T-P Post to Post Twist 1 Finial A ME80 ME82 ME85 ME86 ME93 ME95 ME98 all Top Posts STARTING Height A Top lock Turning Length ottom lock idth ME ⅝ 3½ ME ⅝ 3½ ME ⅝ 3½ ME ⅝ 3½ ME ⅝ 3½ 2ND FLOOR LANDING ME ½ 22⅛ 3½ INTERMEDIATE LANDING ME ½ 17 37⅛ 3½ ME80 ME82 ME85 ME86 ME80-1T-P ME82-1T-P ME85-1T-P ME86-1T-P 29

30 OODURY SERIES Limited Reserve ollection Handrails The new premium Limited Reserve ollection was created to suit your signature style with a combination of classic and modern designs. The oodbury Series features non-tapered turnings with an exciting variety of milling options. 2 arley Open Twist 2 Ribbon 3 Ribbon 2 arley Open Twist 2 Ribbon 3 Ribbon ALUS TERS ON THE RISE AR 05- OPEN-T 05-2RI 05-3RI AR 15- OPEN-T Thickness (Square) 1¾ 1¾ 2 1¾ 1¾ 1¾ 1¾ 2 1¾ 1¾ 15-2RI 15-3RI Rounded For rail specifi cations see page 52. ottom Rails 5260 Available Lengths: 34, 38, and 42 The bottom square becomes longer as the baluster height increases. The turned area is parallel to the rake (rise) of the stair. alusters are trimmed from the bottom (loose dowel pin). Round Top and ottom locks Available 1¾ ¾

31 Limited Reserve ollection OODURY SERIES Over the Post 2 arley Open Twist 2 Ribbon 3 Ribbon NEELS VOLUTES/ TURNOUTS Newels Height Turning Length ottom lock idth STARTING ½ LANDING ½ ANGLE (INDER) ½ ottom VOLUTE/TURNOUT (Adjustable) ADJ 3½ -2AR -OPEN-T -2RI -3RI Available in 3 newel lengths: 74, 75, 78 (plain shown in measurement chart) Post to Post 2 arley Open Twist 2 Ribbon 3 Ribbon Finial A all Top Posts STARTING Height A Top lock Turning Length ottom lock idth ½ 3½ ½ 3½ ½ 3½ ½ 3½ ½ 3½ 2ND FLOOR LANDING ½ 24 3½ INTERMEDIATE LANDING ½ ½ -2AR -OPEN-T -2RI -3RI Available in 5 post lengths: 80, 82, 93, 95, 98 (plain shown in measurement chart) 31

32 LOMOND SERIES Limited Reserve ollection The Lomond Series features hourglass shaped turnings with center details. Over the Post NEELS VOLUTES/ TURNOUTS LM74 LM75 LM78 LM60 Newels STARTING Height Turning Length ottom lock idth LM ½ LM74 LM75 LM78 LANDING LM ½ ANGLE (INDER) LM ½ VOLUTE/TURNOUT (Adjustable) LM ADJ 3½ ottom LM05 Thickness 1¾ Available Lengths 34, 38, and 42 Post to Post Finial Rounded A LM80 LM82 LM85 LM86 LM93 LM95 LM98 all Top Posts STARTING Height A Top lock Turning Length ottom lock idth LM ½ LM ½ LM ½ LM ½ LM80 LM82 LM93 LM95 LM98 LM85 LM86 LM ½ 2ND FLOOR LANDING LM ½ 24½ 3½ INTERMEDIATE LANDING For rail selection and specifi cations see page 52. LM ½ 16 39½ 3½ Round Top and ottom locks Available 32

33 Limited Reserve ollection SUSSEX SERIES The Sussex Series features clean and modern non-tapered turnings. Over the Post 1 arley 1 Ribbon VOLUTES/ TURNOUTS SS74 SS75 SS78 SS60 SS05 SS05-1AR SS05-1RI Thickness 1¾ Available Lengths 34, 38, and 42 Newels STARTING Height Turning Length ottom lock idth SS ½ LANDING SS ½ ANGLE (INDER) SS ½ VOLUTE/TURNOUT (Adjustable) SS ADJ 3½ ottom -1AR -1RI Available in 3 newel lengths: SS74, SS75, SS78 (plain shown in measurement chart) Post to Post 1 arley 1 Ribbon Rounded Finial A SS80 SS82 SS85 SS86 SS93 SS95 SS98 all Top Posts STARTING Height A Top lock Turning Length ottom lock idth SS ½ 3½ SS ½ 3½ SS ½ 3½ SS ½ 3½ Round Top and ottom locks Available SS ½ 3½ 2ND FLOOR LANDING SS ½ 24 3½ INTERMEDIATE LANDING SS ½ ½ -1AR -1RI Available in 5 post lengths: SS80, SS82, SS93, SS95, SS98 (plain shown in measurement chart) For rail selection and specifi cations see page

34 ALUSTER HAND ARVED SERIES Limited Reserve ollection MOD 11 Hand arved Decorative Scroll NEELS SE11 Use of easings require carpenter/ craftsman for installation. Easings do NOT match any given rail and must be feathered into a rail of your choice. TR11 N24A TL11 Sq Sq Sq N11A N11 11 N24 MOD 14 Hand arved Double Pen Nib NEEL ALUSTER Post Tops are pictured on page 36 Euro eech Models 11, 14, 15, 40 and 45 are made of fi ne European eech, a specie which offers much fl exibility for staining options. N

35 Limited Reserve ollection HAND ARVED SERIES MOD 15 Hand arved Decorative Twine NEEL ALUSTER N15 15 MOD 40 Hand arved Enhanced Decorative Scroll NEEL SE40 N40 N40A Use of easings require carpenter/ craftsman for installation. Easings do NOT match any given rail and must be feathered into a rail of your choice. 35

36 HAND ARVED SERIES Limited Reserve ollection Hand arved Newel aps MOD 45 Hand arved Enhanced Swan PT680A PT680 NEELS PT690A N45 PT690 MOD 99 Hand arved Decorative Posts and alusters Available in Hard Maple, Oak and herry. Top lock 5 Top lock 3½ PT700A 7¾ Top lock 2¾ 9 Top lock 1¾ 7½ 7½ PT PT705A 13⅜ 13 7½ 7½ PT705 ottom lock 5⅜ Sq ottom lock 3½ Sq ottom lock 3½ Sq ottom lock 2⅜ Sq NA1 NG1 A1 G1 NA2 NG2 A2 G2 Newels alusters Newels alusters 36

37 37

38 IRON ALUSTERS Iron aluster Measurment Tips StairTrends iron balusters are 44 in length with details centered 18 from the top unless noted. ut as needed from the bottom. SQUARE Most square balusters have a domed top to the baluster for easy installation into the handrail. Standard balusters are ½ x ½ Hammered series balusters are 9/ 16 x 9 / 16. Mega Square series, page 50, are ¾ x ¾ and Venetian Round, page 49 is 5 / 8 diameter. HEIGHT EXEPTIONS alusters Series Height Page elly Posts ollarless M " 40 M RENPANEL 42" 39 M / 8 at scroll, 9 at base x 44 H Finishes To specify your type of fi nish, add the letter code after each item number. Flat lack (lightly textured) SAT Satin lack (smooth finish) P Grey lack AZ Antique ronze NV Nickel Verde (hand rubbed) OR Oil Rubbed opper (hand rubbed) OR Oil Rubbed ronze (hand rubbed) 38

39 IRON ALUSTERS Decorative Series More Decorative Panel designs at StairTrends.com SQUARE Detail entered 18 from Top 30 x 36 H M ¾ x 41 H RENPANEL N/A in NV aluster Thickness Handrail racket Matching Accessories AZ Antique ronze (Textured) P Grey-lack (Textured) Flat lack (Lightly Textured) SAT Smooth Satin lack NV Nickel Verde (Hand Rubbed) OR Oil Rubbed opper OR Oil Rubbed ronze 3011-AZ 3012-P SAT 3017-NV 3018-OR 3019-OR 39

40 IRON ALUSTERS Designer alusters & Panels Designer Series is available in Flat lack Only 6 Knuckle Square 6 ME03 ME07 SQUARE 40 ME07P ME08 ircle dimension - 4 Diameter M40144 M40244 M40840 M41144 only only only only US05 4 Diameter Designer Medallion Inserts include a front and back that screw together. ME07P is a painted gold fi nish. All other designs are Flat lack. 1KNU44 2KNU44 2KNU1ASK44 Tubular* Tubular* Solid *NV fi nish is Solid aluster Thickness - The top of these balusters are square, not domed. aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Knuckles For use with PLA44 Plain aluster AK01 Adjustable Knuckle 1½ x 2 AK02 Fluted arrel Adjustable Knuckle 1½ x 1½ AK03 Urn Adjustable Knuckle 1⅜ x 1⅞ AK05 Tall arrel Adjustable Knuckle 1⅜ x 2¼ AK04 Fluted Deco Adjustable Knuckle ⅞ x

41 Twist & asket Square I R O N A L U S T E R S 22 SQUARE rass detail for R101 R102 utterfly - 7 x 15¼ L 1ASK44 1T44 2ASK44 2T44 1T22 R101 R102 M34044 PLA44 Tubular* Tubular* Tubular* Tubular* Tubular* Solid Solid Solid Tubular* *NV finish is Solid only only, SAT, AZ, OR aluster Thickness - DOMED tops and SQUARE bottoms Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Iron Shoes for Square Installations IRON SHOES Page Universal Square 44 9/16 Square 45 All Round 47,48 3/4 Mega Square 49 Shoe Model Number FSH01 M06 M020 M022 SR04 PSH02 Available Finishes All All, SAT, P, AZ, P All All Shoe ase Dimensions 1½ Square 13/8 Square 17/8 Diameter 2 Square 2½ X 1½ 1¼ Square Finishes: (Flat lack), SAT (Satin lack), P (Grey lack), AZ (Antique ronze), NV (Nickel Verde), OR (Oil Rubbed opper), OR (Oil Rubbed ronze). FSH01, M06 & PSH02 are shipped in aluminum for easy installation (Finish NV excepted). All other shoes are iron. 41

42 IRON ALUSTERS Scroll & Unique Square Scroll 7 x 24 L Scroll 5½ x 16 L Scroll 5½ x 22½ L Scroll 7 x 16 L Scroll 5 x 24 L Scroll 5 x 26 L Scroll 5 x 12 L Knot 3½ x 4½ L ave 1¼ x 30 L SQUARE M301 M501 M601 M321 M331 MDS MSS KNOT44 AVE44 N/A in NV N/A in P N/A in NV & AZ only aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) 42

43 Ribbon Square IRON ALUSTERS 10 SQUARE rass detail for R801 R802 utterfly 7 x 6½ L utterfly 7 x 6½ L 1RI44 2RI44 R801 R802 M8044 M8544 M19044 M20044 fi nish only fi nish only aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Installation Products A501K Fast Setting Epoxy Kit includes 5 oz. A-7 epoxy, A-24 nozzle & piston for use with standard caulking gun (gun not included). A24 Nozzle Extra nozzle for A-501-K F120 Mixing Nozzle for F300 F101 Injector Tool for F300 adhesive. F300 Slow ure Epoxy minute work time. 11 oz. cartridge, will install balusters, both ends. Mixing nozzle not included order F

44 IRON ALUSTERS Twist & asket Square ollarless - 41" ollarless Series is available in Flat lack Only elly Square alusters - 40" 20½ SQUARE 8 22 Details centered 20-½ from square top elly extends 5 3 /8 from bar line for easier code compliance Plain Twist asket M-1-41 M-2-41 M-3-41 M-4-41 M-5-41 PLA40-LY 1T40-LY 1ASK-LY only only only only only N/A in NV N/A in NV N/A in NV aluster Thickness - SQUARE tops and bottoms aluster Thickness - SQUARE tops and bottoms Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Universal Iron Shoes for 1/2" or 9/16" Square Installations IRON SHOES Page Square 41 9/16 Square 45 All Round 48,49 3/4 Mega Square 50 Shoe Model Number RD201 SQ301 RM020 RM201 RM301 Available Finishes All All, SAT, P,AZ All All Shoe ase Dimensions 17/8 Diameter 15/8 Square 2 Diameter 2 Diameter 2 Square Finishes: (Flat lack), SAT (Satin lack), P (Grey lack), AZ (Antique ronze), NV (Nickel Verde), OR (Oil Rubbed opper), OR (Oil Rubbed ronze) 44

45 IRON ALUSTERS Gothic Hammered rass detail for R161 9/16 SQUARE Gothic Hammered ar close-up M14344 M14044 M15044 M16044 R161 fi nish only 9/16 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Iron Shoes for 9/16" Square Installations IRON SHOES Page Square 41 Universal Square 44 All Round 48,49 3/4 Mega Square 50 Shoe Model Number H03 H06 H020 H04 H05P Available Finishes All All (Flat lack) All All Shoe ase Dimensions 1½ Square 13/8 Square 17/8 Diameter 2½ X 1½ 1¼ Square Finishes: (Flat lack), SAT (Satin lack), P (Grey lack), AZ (Antique ronze), NV (Nickel Verde), OR (Oil Rubbed opper), OR (Oil Rubbed ronze). H05P & H06 are shipped in aluminum for easy installation (Finish NV excepted). All other shoes are iron. 45

46 IRON ALUSTERS Santa Fe Forged Hammered all Forged Hammered Old English Forged Hammered utterfly 7 x 6½ L Scroll 5 x 14.6 L Scroll - 5 x 14.6 L 9/16 SQUARE M9044 M10044 M11044 M12044 M13044 M305 M308 M310 M9044 M330 M13144 M13244 N/A in NV N/A in NV 9/16 aluster Thickness 9/16 aluster Thickness 9/16 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Iron Shoes see the following pages: IRON SHOES Page Square 41 Universal Square 44 9/16 Square 45 All Round 48,49 3/4 Mega Square 50 Forged Hammered ar close-up Detail of M13144 and M

47 IRON ALUSTERS Scroll Forged Hammered Tudor Forged Hammered 6 7 9/16 SQUARE Scroll 5¼ x 13½ L Scroll 5¼ x 15¼ L Scroll 5 x 26 L M13544 M30344 MHDS M13344 M13444 M13644 M13744 N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV 9/16 aluster Thickness 9/16 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Detail of M13344 decorative diamond window Detail of M13644 decorative oval window 47

48 IRON ALUSTERS Roman Round Arrow Round Arrow Round Series is available in Flat lack Only Round balusters have round tops and bottoms. ROUND 9/16 ROUND 4 Detail of Decorative enter Detail of Decorative enter Scroll 7 x 6½ L Scroll 7 x 15¼ L R60044 R60144 R60244 R61144 R61244 N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV aluster Thickness (Textured) R20044 R21044 R22044 R22544 only only only only 9/16 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Iron Shoes for 1/2" & 9/16" Round Installations Flat Square Shoe Pitched Shoe For round balusters R08F R09P For 9/16 round balusters R07F R06P Shoe ase Dimensions 1½ Square 1¼ Square Finishes: shoe: All finishes - except NV 9/16 shoe: only 48

49 Gothic Round Available in Flat lack Only Venetian Fluted Fluted IRON ALUSTERS Matching Iron Newels /16 ROUND 5/8 ROUND IRON NEELS R54344 R54044 R55044 only only only 9/16 aluster Thickness R R R R N/A in NV N/A in NV N/A in NV N/A in NV 5/8 Round NEL- NEL- NEL- NEL- 140GOTHI ASK48 RI48 T48 1-3/16 Thick x 48 Long including 1 Top Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) Venetian Detail of Venetion R65044 decorative center R10 Flat Round Shoe designed for Venetian style 2 diameter (pitched shoe not available) N101 Newel Anchoring System w/shoe Iron Newel Anchoring System Available in 7 fi nishes: Satin lack (S) Flat lack () Antique ronze (AZ) Grey-lack (P) Oil-Rub opper (OR) Nickel Verde (NV) Oil Rub ronze (OR) 49

50 IRON ALUSTERS ¾" MEGA Square alusters All MEGA balusters are rounded to 9/16 diameter on top for easy installation into handrail hole. Scroll - 5½ x 16 L Scroll - 5½ x 24 L 3/4 SQUARE MEGA-PLA MEGA-1T MEGA-2T MEGA-1ASK MEGA-2ASK MEGA-M501 MEGA-M601 MEGA-1KNU MEGA-2KNU Tubular Tubular Tubular Tubular Tubular Tubular Tubular Tubular Tubular N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV N/A in NV TUULAR 3/4 aluster Thickness Available Finishes SAT P AZ NV OR OR Satin lack Antique Nickel Verde Oil Rubbed opper Grey lack (smooth finish) ronze (hand rubbed) (hand rubbed) Flat lack (lightly textured) Oil Rubbed ronze (hand rubbed) MEGA Iron Shoes for 3/4" Square Installations IRON SHOES Page Square 41 Universal Square 44 9/16 Square 45 All Round 48,49 Shoe Model Number MEGA-M08 MEGA-PSH08 MEGA-FSH08 MEGA-RD208 MEGA-SQ308 Available Finishes All (except NV) All (except NV) All (except NV) All (except NV) All (except NV) Shoe ase Dimensions 1½ Square 1½ Square 1¾ Square 2 Diameter 2 Square Finishes: (Flat lack), SAT (Satin lack), P (Grey lack), AZ (Antique ronze), NV (Nickel Verde), OR (Oil Rubbed opper), OR (Oil Rubbed ronze) 50

51 IRON ALUSTERS 9/16 ROUND 5/8 ROUND IRON NEELS 51

52 HANDRAILS 2¼ 2¼ 2 7 / / / 8 2¼ 5000 Available Plowed for 1¼ 5100 Available Plowed for 1¼ or 1¾ 5200 Available Plowed for 1¼ 2 3 / / / / / Available Plowed for 1¾ 5226 Available Plowed for 1¾ or Available Plowed for 1¾ 2 5 / / / / 16 2¼ 2 3 / / / Available Plowed for 1¾ or Available Plowed for 1¼ 5700 Available Plowed for 1¾ For ending Rail add - to rail number. See our website for bending limitations. Pre-bent rail is available for tight radius applications. ONTEMPORARY RAILS 5900 Available Plowed for 1¾ Rails idth Height /8 3½ /8 5½ /8 5½ ¼ 5¼ ¾ 1 5 / SHOE RAILS & FILLETS 6100 Available Plowed for 1¼ or 1¾ ¼ 5/ ¾ 5/ ¼ 5/ ¾ 5/16 2½ ½ ½

53 HANDRAIL FITTINGS HANDRAIL FITTING Fittings may be ordered as plowed for square top balusters add the suffix -P to the fitting number. FITTING OPTIONS All Starting Fittings are available with a 90 up easing attached. Specify the fi tting with a -90 suffi x. Starting Easing with ap 2#00 Up Easing 90 2#04 Starting Easing no ap 2#00- Plain ap 2#06 Level Quarterturn 2#01 Opening ap 2#07 Up Easing 2#02 Returned End 2#35 Over Easing 2#03 Tandem ap 2#08 Over Easing Return End 2#03R oped End 2#38 Example: Fittings can be ordered as 135. Quarterturn with ap 2#09 Volute Left Hand 2#10 Volute Right Hand 2#11 limbing Volute limbing Volute Left Hand Right Hand only available as listed below 2210-L 2211-L 2810-L 2811-L Example: Five Inch Offset Rail Right Hand 2#12 Five Inch Offset Rail Left Hand 2#13 enter to enter 2⅝ enter to enter 4½ Turnout Left Hand 2#14 Turnout Right Hand 2#15 Turnout Left Hand 2#14A Turnout Right Hand 2#15A 53

54 HANDRAIL FITTINGS GOOSENEKS LH 2-Riser no ap 2#16 RH 2-Riser no ap 2#17 LH 2-Riser with ap 2#18 RH 2-Riser with ap 2#19 LH 2-Riser no ap 2#22 RH 2-Riser no ap 2#23 5½ enter to enter LH 2-Riser with ap 2#26 RH 2-Riser with ap 2#27 Straight 2-Riser with Tandem ap 2#28 LH 2-Riser no ap 2#29 RH 2-Riser no ap 2#30 Straight 2-Riser with ap 2#32 Straight 2-Riser no ap 2#34 LH 2-Riser with ap 2#91 5½ enter to enter RH 2-Riser with ap 2#92 Goosenecks can be job cut for 1-rise application. To obtain a 3 or 4 rise gooseneck fi tting for a winder application add a piece of rail to a 2-rise fi tting. 54

55 RAILS & AESSORIES ROSETTES ALL RAKETS Decorative wall brackets add elegance to open tread stairs ½ Diameter Diameter A 2205SQ 2205RE 11½ x / 16 x 6½ 4 5 / 8 Square 4 5 / 16 x ½ x 8 1 / 8 6 x 7 3 / 8 NEEL POST TOPS PT9904 2¾ x 3 7 / 8 PT9935 3¼ x 4 7 / 8 PT / 8 x 3¾ PT9938 3¼ x 4 7 / 8 PTLM 3 x 2½ PTSS 3 x 3 PT9940 2¾ x 2 3 / 8 NEEL DROP 2¾ PT9990OL 3¼ x 4½ PT9990-A 3¼ x 4¼ PTY-R 3¼ x 3¾ ALL RAILS PTME-P 3¼ x 3¾ PT 3 x 3 1¾ ND99 3¼ ND399 ALL RAIL FITTINGS Quarterturn Up Easing Over Easing all Rail Fittings ross Reference hart RAIL QUARTER- UP OVER TURN EASING EASING

56 STARTING STEPS STARTING STEP includes Shoe and ove. Risers are ¾ x 7, total Rise 8 1/ 32 ; single ullnose treads are reversible. 6¼ Radius - use with Volutes and Turnouts Single ullnose ITEM idth of ut-out Tread Depth ullnose ½ 10½ ½ 10½ ½ 10½ Double ullnose ITEM idth of ut-out Tread Depth ullnoses ½ ½ 21 Above starting steps accommodate Volutes and Turnouts in rail profi les 5200, 5208, 5000, 5310 and with Turnouts for /16 Radius - use with Volutes,Turnouts and limbing Volutes Single ullnose ITEM idth of ut-out Tread Depth ullnose ½ 12¼ ½ 12¼ Double ullnose ITEM idth of ut-out Tread Depth ullnoses ½ 24½ ½ 24½ Above starting steps accommodate Volutes and Turnouts in rail profi les 5100, 5400, 5226, 5700 & 5900 and with Volute for Also use these steps for all climbing volutes. 8 7 /8 Radius - use with ox Newels Single ullnose ITEM idth of ut-out Tread Depth ullnose ½ 12¼ ½ 12¼ Double ullnose ITEM idth of ut-out Tread Depth ullnoses ½ 24½ ½ 24½ ½ 24½ Above starting steps are for use with OX NEELS and any rail. 7 Radius - use with ox and Square Top Newels and 90 Starting Fittings Single ullnose ITEM Tread idth Tread Depth ullnose ½ 10½ ½ ½ Double ullnose Use 6233, 6251, 6253, 6255 with ox Newels or when using a square top newel on the 2nd riser. Use 6433, 6453, 6633 and 6653 with fi ttings that have a 90 degree up-easing attached & 6453 are used with 5200, 5208, 5000, 5310 volutes and turnouts and 5500 & 5100 turnouts & 6653 are used with 5100 & 5500 volutes and 5400, 5226, 5700 & 5900 with volutes and turnouts. ITEM Tread idth Tread Depth ullnoses ½ ½ ½ owed Starting Steps - use with Volutes and Turnouts Single ullnose idth of ITEM ullnose ut-out ¾ owed Treads are 11½" and project to 14½" at center. Double ullnose idth of ITEM ullnoses ut-out ½ Above starting steps accommodate Volutes and Turnouts in rail profi les 5200, 5208, 5000,5310 and with Turnouts for

57 TREADS & MOULDING TREADS: 10½, 11½, 13½ Treads are 1 1 / 16 thick. Available in Lengths: 36, 42, 48, 54, 60, 72 and Lineal. RISERS Plain Tread - Nosed inder tread blanks are available (not pictured) Mitered Return Treads Specify Right or Left Hand (RH pictured) Mitered Returns 2-Ends Specify the distance between the returns. Risers Available in ¾" x 7½" or ¾ x 8 LANDING TREADS RETURN NOSING OVE MOULDS TREAD MOULD / 16 x 11 / / (3½ L) (5½ L) 1½ ¾ Length / 16 x 1¼ LF 1 1 / 16 x 1¼ / 8 x 13 / 16 SHOE MOULD 129 7/ 16 x 11 / ¼ x 1 13 / 16 ENDALE LANDING TREADS ¼ L ½ L FALSE END STARTING STEPS, TREADS & RISERS Reversible False End Starting Step ¼ radius / 16 radius False End starting steps and treads are used when carpeting the center of the stairs. Use or when using a turnout or a volute False End Kit - Unassembledsembled False End Tread with Return (Specify LH or RH) False End Tread False Riser LH 8071 RH RH DIMENSIONS: Inside 5¼ x 12¾ Outside 6½ x DIMENSIONS: Inside 6 x 11 Outside 6 x 12¼ ¼" x 8" 8076 Installation sheet is available. 57

58 INSTALLATION HARDARE ontains: 1-11 lag bolt 1 washer 1 nut 2 plugs (1 oak and 1 poplar) SURE-TITE 3008 Newel Fastening System Uses fl oor joists for support No additional framing needed Installs in as little as 10 minutes Needs no mortising or coping ill not loosen over time Exceeds stair code strength requirement. Tools Required Drill its: 3 / 8, 5 / 8, 1½ ox End rench: ¾ Newel Post Fasteners 3009 and 3019 L-rackets come with 4 super heavy-duty extruded brackets, 28 hardened screws and mitered trim. Specify 3009 for 3 newels and 3019 for 3½ newels. Available in Red Oak, Poplar, Maple and herry. Used to mount newel posts on fi nished and unfi nished fl oor surfaces. The split bolt system makes it easy for universal applications. Threadlock 3070 Newel Post Fastener Newel Kit Locate center of newel on fl oor. Drill 5 / 8 hole in to the fl oor a min. of 1¼ deep. 2. Install the 2 hex-nuts on to the installer bolt and lock them together leaving at least ¼ of threads exposed on the end of the bolt to receive the steel insert. Thread the steel insert on to the installer bolt until the steel insert lightly contacts the hex nuts. 3. Install the steel insert into the fl oor (min. of 1 / 8 under fi n. Floor). Remove the installer bolt. Remove the 2 hex nuts from the installer bolt and install them on to the 5 hanger bolt locking them together. 4. Drill a 5 / 16 pilot hole in the bottom of the newel. Remove hex nuts. 5. Thread the newel into the steel insert. Use construction adhesive under the newel during fi nal assembly. Keylock Newel Fastener Includes: 1 3 / 8 x 5 Lag olt 1 3 / 8 x 1 7 / 8 x 2 5 / 8 Steel Inlet Plate 4 #10 x 3¾ ood Screws aluster Fasteners 2½ x 5 / 16 Dowel Screw Steel Insert 3076 Dowel Screws in quantity of 50 DS2501 Individual Dowel Screw 3033 Drill Driver for Dowel Screws uttons & Plugs / 8 utton 6404 ½ utton utton / 8 Flat Head Plug 6804 ½ Flat Head Plug Flat Head Plug ½ Flat Head Plug Installer olt Installer Nuts Drill Driver Tread Newel Post Hanger olt Steel Insert Tread Rail olt with 1 Plug 6805 Rail olt with washer, nut and plug 3032 Rail olt Drill Driver Rail olt Installer 92 Install Lag into Rail, Post, or Fitting. Newel Mounting Plate Fits 3 to 3½ Square Newels Trim 9006 Threads the nut onto a rail bolt with the aid of a rubber band and allows for access to the nut for tightening Plate with Trim* and Screws SNMP4 Plate only with screws 9006 Trim Only 1 1 / 8 x 1 1 / 16 *Trim available in Oak, Poplar, herry, Maple Hand Rail rackets rackets are available in all popular fi nishes. HR4235 all to rail center line 2⅜. For Solid rass specify HR059. For 3½ projection specify HR312. HR601 all to rail center line 2¾. NOTE: See page 39 for powder coated brackets with a 3¼ center line. 58

59 STAIRAY TAKE-OFF NOTES StairTrends represents the fi nest in quality craftsmanship, integrity, strength and natural hardwood beauty. It is the responsibility of the purchaser to follow code regulations and install our stair products in accordance with all local or national building codes. Note: all products in this catalog are designed for interior application only. Number of Risers: Ideal riser height is 7½ and should not exceed 8 in height. The overall rise (fi nished fl oor to fi nished fl oor height) divided by the riser height will give you the number of risers (round this fi g- ure). The overall rise divided by the number of risers gives you the net riser height. Example: Overall rise of 106¾ 7½ = number of risers. Rounding down gives you 14 risers. Net height of each riser is 106¾ 14 = 7-5/8. Tread Size: The number of treads will always be one less than the number of risers. (In our example 13 treads) The overall run (horizontal distance from fi rst riser to landing) divided by the number of treads is the tread run. The tread run plus 1 for the tread nosing is your overall tread size. Example: Overall run of 133¼. Tread run = 133¼ 13 treads = 10¼ tread run. Actual net tread size needed would be 10¼ +1 = 11¼. If you have the room you may adjust the overall run to make the tread size come out even. For stairs open on one side order mitered return treads and specify returned 1 end. hen facing the stair at the bottom of the stair a right hand (RH) open stair will be open on your right hand side. For stairs open two sides specify returned two ends. Specify the distance between the mitered returns. Stringer oard or Skirtboard: Stringer board should be ordered at 13 per tread plus any additional for extension past the fi rst and last risers. In our example 13 treads x 13 =169. Landing Tread: Use the 8090 is suitable for newels 3 thick. For thicker newels specify (newels wider than 4 may require a custom landing tread). Order enough lineal footage to cover your balcony and the width of each tread at every landing ove Moulding: Order lineal footage to place under landing tread and under each tread and mitered return. Handrail: heck local building codes for a graspability rule (width of handrail at the point where you would grab the handrail). hoose your handrail accordingly (most codes allow up to 2-5/8 width). Handrail lengths can be fi gured at a rate of 13 per tread plus your straight balcony. e offer lengths in 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, and 16 feet. Note: Some local codes require a continuous rail from the bottom of the stair to the 2nd fl oor. In applications where the fi rst few treads are open ended and the remaining treads are closed (by a wall) you may need to use fi ttings 2#12 or 2#13. all Rail: heck local building codes for wall rail requirements. all rail lengths can be fi gured at a rate of 13 per tread. all rail brackets should be placed at start and fi nish of each run with additional brackets every 2-3. All of our standard rails may be used for wall rails. alusters per Tread: Four Inch Sphere Rule. There must be no place in the balustrade where a 4 sphere can pass through. You may be required to use 3 balusters per tread to satisfy this rule. alusters: heck local building codes for balcony height (top of rail to top of fl oor). Most codes call for a minimum of 36. Some local codes require 42. For balcony runs place 4-6 on center (remember the 4 sphere rule). Subtract one baluster for each newel post (not including your 1st newel) and subtract one baluster from the total to allow for the end of the balcony. Rake handrail height is the distance from the top of the handrail to the top of the leading edge of the tread. urrent codes call for a distance between heck your local codes. If using a 30 rake code then your baluster heights per tread will be 31 and 34 [31,34 and 36 if using three balusters]. Use our On the Level balusters for this application. aluster heights for a 34 rake code can vary depending on rise/run being used. On the Level and On the Rise balusters may be used for this application. For a 7½ rise and a 9½ run (10½ tread) the baluster heights would be 34 and 38. Volute balusters: rake code For 1¼ balusters use 6 balusters 36 long. For 1¾ balusters use 4 balusters 36 long. Volute balusters: rake code For 1¼ balusters use 6 balusters 42 long. For 1¾ balusters use 4 balusters 42 long. Turnouts: rake code requires two 1¼ (one 36 and one 39 ) balusters or one 42 if using 1¼ rake code requires two 42 1¼ balusters or one 42 if using 1¾. Newels: Newels should be placed at each point of stairway transition (this includes the starting newel, landings, balconies and each time the stairway changes direction). Use a newel when a balcony run exceeds 9 feet. Post-to-Post Newels Starting: For the rake code newels should be approximately 43. Newels for the rake can be 48 if surface installed or 56 under other applications. Intermediate Landing: Use the newels with a 14½ face when NOT using a landing fi tting. If using a landing fi tting you may choose a newel with a 5 face square. Landing (2nd Floor): Use the newels with a 11 face when NOT using a landing fi tting. Note if your balcony is 42 you will need to use a landing fi tting (you can use a 48 tall newel if surface mounting) inder Newels: For intermediate landings with 2-winder treads and a landing fi tting chose a 72 long newel. For intermediate landings with 3-winder treads and a landing fi tting chose a long newel. Over-the-Post Newels Volute and Turnouts: For the rake code use a 43 pin top newel designated for volutes or turnouts. For the rake code use a 48 tall volute/ turnout newel. You may use a standard 43 volute newel if using a climbing volute. Starting Newel ap: For the rake code use For the rake use a 48 if no starting step is used. Intermediate Landing: Use a 56 newel at the corner of an L-shaped stair. If using a landing fi tting you may choose a newel with a 5 face square Landing (2nd Floor): Use newels. If the newel is to extend below the 2nd fl oor surface use a 56 or longer newel. inder Newels: For intermediate landings with 2-winder treads and a landing fi tting chose a 72 long newel. For intermediate landings with 3-winder treads and a landing fi tting chose a long newel. 59

60 Distributed y: 2010 Printed in U.S.A.