Color-Coated Screws and Fasteners

Transcription

1 Color-Coated Screws and Fasteners Stake Fastener Company Ramona ve., Chino, C (0) - Fax: (0) -0

2 Company ackground Stake Fastener Company, an operating division of upree, Inc., specializes in the design and manufacture of unique and novel special application color-matched fasteners. Our first products, introduced in the 0s, were designed for specific aircraft/aerospace applications. Stake Fastener products continue to be found on all major aircraft in service today, as well as in other sectors of the transportation industry such as buses, trucks, trains, and agricultural equipment. Our products are also widely used on electronic instruments, medical and telecommunications devices, and rack-mounted equipment. Manufacturing Capabilities esigns are conceived, engineered, tooled, manufactured, assembled, stored, and shipped from our 0,000 sq. ft facility in Chino, California. We have expertise in cold heading, screw machine work, threading, injection molding, and coating processes, and work with customers on a global scale, shipping our products worldwide. Table of Contents Introduction... PN-L-SCREWS Screws w/ Captive Washer, Color-Matched ecorative Color-Coated Screws Pressure isplacement Stake Fasteners Special Fasteners ppendix - Stock Colors...-0 ppendix - Technical Notes...-0 ppendix C - etailed Product Listing...C-0 Quality Stake Fastener Company s quality management system (QMS) is ISO 00: and S0: registered, enabling us to maintain close control over our manufacturing processes. Our business systems, inventory management, and quality system are fully integrated with an ERP platform, making this information seamless and accessible. Summary We welcome all inquiries for similar items not shown in this catalog and enjoy working with designers and engineers to propose recommendations for their particular application needs. Customers are also always welcome to speak with us in person. We have facilities with room to grow. How To Order: Orders may be placed by , telephone, fax or mail. Call (0) -, :0 a.m.- :0 p.m. Pacific Time, Monday through Friday or fax us at (0) -0. To an order, send it to. Note on RoHS Compliancy: Products that are RoHS-compliant are labeled as such throughout this catalog. RoHS is the Restriction of Hazardous Substances irective, which restricts the use of certain hazardous sub- No portion of this catalog may be reproduced in whole or in part without prior written permission from upree, Inc. Typographical, photographic and editing errors in our catalog and website are unintentional and we reserve the right to correct them. Copyright by upree, Inc. ll rights reserved. Stake Fastener Company

3 PN-L-SCREWS PN-L-SCREWS Screws with Captive ecorative Nylon Washer, Color-Matched Screw & Washer PN-L-SCREWS are pan head screws with a colored head and captive nylon washer molded in matching color. High tensile steel screws are used to provide maximum resistance to screwdriver damage. Colored coating material on the screw head withstands normal abrasion, chipping and solvent action. The combination of a hardened base surface and the adhesive qualities of the coating material assure retention of quality appearance after repeated use. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment. PN-L-SCREWS, color-matched to the equipment, blend with the background to eliminate distraction from the information being displayed on the panels. Stake Fastener Company -0

4 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT C UPREE, INC. PRT NO. EXMPLE: PS F S0YE = PN-L-SCREW.0- X / LG, LLOY, PHILLIPS RIVE, SEMI- GLOSS YELLOW PER FE-ST- NO. PS. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer. C C C C F C F SIZE.0- UNC-.-0 UNJC-.- UNJC-.- UNJC-.0- UNJF-.- UNC-.- UNJF-. The screws listed in this series reflect aircraft quality with emphasis on the REV 0- - L LENGTH RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. Inventory of all sizes listed in the table and stock colors listed in the forward section of this catalog are carried in stock to assure short lead times. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter P from the head type code LLOY PHILLIPS RIVE SCL0 IM T ±.0. Screws meet all requirements of NS00 series, including thread size.0- and.- which are not listed as part of the NS specification.. Screws are stocked cadmium plated per QQ-P-, Type II, Class.. Threads are in conformance with MIL-S-, except parts with thread codes C & C which are IW MIL-S-.. Pan-L-Screws are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples PN-L-SCREW E, MCHINE, LLOY

5 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT C UPREE, INC. PRT NO. EXMPLE: PS F ZR S0G = PN-L-SCREW.0- X / LG, LLOY, RoHS-ZINC PLT, PHILLIPS RIVE, SEMI-GLOSS EIGE PER FE-ST- NO. PS. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer. C C C C F C F SIZE.0- UNC-.-0 UNJC-.- UNJC-.- UNJC-.0- UNJF-.- UNC-.- UNJF-. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification. L. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent LENGTH REV 0- - RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. Length code designates nominal length in /-inch increments (for example, length code = /-inch long screw).. For color-coated screw less washer, omit the letter P from the head type code. ZR LLOY PHILLIPS RIVE RoHS-COMPLINT ZINC PLTE SCL0 IM T ±.0. Screws meet all requirements of NS00 series, including thread size.0- and.- which are not listed as part of the NS specification, except for plating requirements.. Plating: Zinc plate IW STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-compliant.. Threads are in conformance with MIL-S-, except parts with thread codes C & C which are IW MIL-S-.. Thermosetting coating material is applied to screw head only. color code of N0N denotes a natural colored washer (molded in natural nylon) and a screw without thermosetting epoxy color coating.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples PN-L-SCREW E, MCHINE, LLOY, RoHS-COMPLINT ZINC

6 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT C UPREE, INC. PRT NO. EXMPLE: PS F CP S0YE = PN-L-SCREW,.0- X / LG, CORROSION RESISTNT, PHILLIPS RIVE, SEMI-GLOSS YELLOW PER FE-ST- NO. SIZE L LENGTH IM T ±.0 PS. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, which increases the basic tensile strength of the corrosion resistant steel by %. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer. C C C C C F C UNF-.-. The screws listed in this series reflect aircraft quality with emphasis on RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. Inventory of all sizes listed in the table and stock colors listed in the forward section of this catalog are carried in stock to assure short lead times. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter P from the head type code. CP CRES PHILLIPS RIVE SCL0 * POLISHE SCREW WITH NTURL WSHER = G0N. Screws meet all requirements of MS () and MS (UNF-).. Screws are stocked passivated per SE-MS Threads are in conformance with H- Federal Handbook for threads.. Pan-L-Screws are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0. Natural (translucent) washer is furnished with polished head screw.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. PN-L-SCREW E, MCHINE, CRES, RoHS-COMPLINT

7 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: PS F T S0L = PN-L-SCREW.0- X / LG, LLOY, TORX RECESS, SEMI-GLOSS LUE PER FE-ST- NO. PS C C C C F C SIZE UNF The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.. TORX is a registered trademark of Camcar Textron. L LENGTH The screws listed in this series reflect high quality with emphasis on the REV C RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE T LLOY TORX RECESS SCL0 forming of the TORX recess to meet design specification. IM T ±.0. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter P from the head type code.. Screws are in accordance with SME Standard No..., Recessed Head Machine Screws, except for recess.. Screws are stocked zinc plated per STM, Class SC, Type II.. Threads are in conformance with H- Federal Handbook for threads.. Pan-L-Screws are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples... PN-L-SCREW E, MCHINE, LLOY, TORX RECESS E T T T T T T T0

8 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT C UPREE, INC. PRT NO. EXMPLE: PS F ZRT LGY = PN-L-SCREW.0- X / LG,, RoHS ZINC, TORX RECESS, LUSTERLESS GRY PER FE-ST- NO. PS C C C C F C C SIZE UNF The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.. TORX is a registered trademark of Camcar Textron.. The screws listed in this series reflect high quality with emphasis on the REV 0- - L LENGTH RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE ZRT LLOY TORX RECESS SCL0 forming of the TORX recess to meet design specification. IM T ±.0. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter P from the head type code.. Screws are in accordance with NSI/SME Standard No..., Recessed Head Machine Screws.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Threads are in conformance with H- Federal Handbook for threads.. Pan-L-Screws are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples PN-L-SCREW E, MCHINE, LLOY, TORX RECESS, ROHS-COMPLINT ZINC E T T T T T T T0

9 TYPICL PPLICTION: SECURING EGE-LIGHTE PNELS C UPREE, INC. PRT NO. EXMPLE: CPS C L0GY = CPTIVE PN-L-SCREW,.- X / LG,, PHILLIPS RIVE, LUSTERLESS GRY PER FE-ST- NO. SIZE IM T L LENGTH T C ±.0 ±.0 ±.0 ±.0 ±.0 MIL-P- PLSTIC PNEL MOUNTING HOLE CPS.- C.0 UNC- PHILLIPS RIVE SCL CPS remains captive to the panel when the panel is removed.. CPS is color-matched with the mounting surface which eliminates distraction from the information display by blending with the background.. llows up to.0 inch circular mismatch of panel clearance hole alignment with fixed threads in hardware plate.. The one piece screw and washer simplifies handling, installation and removal of attachment hardware.. May be installed and removed without use of special tools, or damage to either the host panel or the CPS.. Screw head is finished with a durable color coating that is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. CPS is recommended for use with Type or pressure displacement STKE FSTENERS.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The screw head dimensions & recess are based on NS0 series. The screw material is heat treated alloy steel, 0, 0, 0 or 0.. Screws and captive metal washer are cadmium plated per QQ-P-, Type II (yellow), Class or zinc plated per STM, Type II (yellow) Class SC. Threads are in conformance with MIL-S- and H- Federal Handbook for threads.. CPS is suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples.. Captivated metal washer is plated steel. Captive Pan-L-Screw ssembly Edge-lighted Panel Hardware Plate w/fastener INSERTION & REMOVL CPTIVE POSITION TIGHTENE POSITION CPTIVE PN-L-SCREW E, MCHINE, LLOY Rev. March 0

10 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: PS SM S0GN = PN-L-SCREW, SHEET METL, - X / LG,, PHILLIPS RIVE, SEMI-GLOSS GREEN PER FE-ST- NO. 0 NOMINL IMETER PITCH RECOMMENE INSTLLTION HOLE SIZE L LENGTH TOL. ±.0 IM T ±.0 PS. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. Type thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the Pan-L-Screw where hole misalignment could cause problems. SM SM SM SM. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the.0... RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The recommended installation hole sizes shown in the table are for light gage (.00) sheet metals. Compensation should be made for other materials and thicknesses. Refer to SME.. ppendix for details.. These Pan-L-Screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. These Pan-L-Screws are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. Inventory of all sizes listed in the table and colors listed in the forward section of this catalog are carried in stock to assure prompt deliveries. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter P from the head type code. PHILLIPS RIVE SCL Screws are in accordance with SME Standard No.... Recessed Head Tapping Screws, Type.. Screws are stocked zinc plated per STM, Class SC, Type II.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples PN-L-SCREW E, SHEET METL,

11 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT PRT NO. EXMPLE: PS SM ZR S0GN = C UPREE, INC. PN-L-SCREW, SHEET METL, - X / LG,, RoHS ZINC, PHILLIPS RIVE, SEMI-GLOSS GREEN PER FE-ST- NO. 0 NOMINL IMETER PITCH RECOMMENE INSTLLTION HOLE SIZE L LENGTH TOL. ±.0 IM T ±.0 SM PS SM SM.. ZR PHILLIPS RIVE SCL SM The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. Type thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the Pan-L-Screw where hole misalignment could cause problems.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV The recommended installation hole sizes shown in the table are for light gage (.00) sheet metals. Compensation should be made for other materials and thicknesses. Refer to NSI.., ppendix VI.. These Pan-L-Screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. These Pan-L-Screws are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter P from the head type code.. Screws are in accordance with SME Standard No..., Recessed Head Tapping Screws, Type.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. PN-L-SCREW E, SHEET METL,, RoHS-COMPLINT ZINC

12 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: PS SM T SG = PN-L-SCREW, SHEET METL, - X / LG,, TORX RECESS, SEMI-GLOSS EIGE PER FE-ST- NO. NOMINL IMETER PITCH RECOMMENE INSTLLTION HOLE SIZE L LENGTH TOL. ±.0 IM T ±.0 E PS. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. Type thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the Pan-L-Screw where hole misalignment could cause problems. SM SM SM SM. Torx is a registered trademark of Camcar Textron.. The screws listed in this series reflect high quality with emphasis on the forming of the Torx recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the.0... RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The recommended installation hole sizes shown in the table are for light gage (.00) sheet metals. Compensation should be made for other materials and thickness. Refer to SME.., ppendix for details.. These Pan-L-Screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. These Pan-L-Screws are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter P from the head type code. T Torx RECESS SCL Screws are in accordance with SME Standard No..., Recessed Head Tapping Screws, Type, except for recess.. Screws are stocked zinc plated per STM, Class SC,Type II Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer color are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. T T T T PN-L-SCREW E, SHEET METL,, TORX RECESS

13 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT PRT NO. EXMPLE: PS SM ZRT S0GY = C UPREE, INC. PN-L-SCREW, SHEET METL, - X / LG,, RoHS ZINC, Torx RECESS, SEMI-GLOSS GRY PER FE-ST- NO. NOMINL IMETER PITCH RECOMMENE INSTLLTION HOLE SIZE L LENGTH TOL. ±.0 IM T ±.0 E PS. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. Type thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the Pan-L-Screw where hole misalignment could cause problems. SM SM SM SM. Torx is a registered trademark of Camcar Textron.. The screws listed in this series reflect high quality with emphasis on the forming of the Torx recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV The recommended installation hole sizes shown in the table are for light gage (.00) sheet metals. Compensation should be made for other materials and thickness. Refer to NSI.., ppendix VI.. These Pan-L-Screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. These Pan-L-Screws are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter P from the head type code. ZRT Torx RECESS SCL Screws are in accordance with SME Standard No..., Recessed Head Tapping Screws, Type, except for recess.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer color are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. T T T T PN-L-SCREW E, SHEET METL,, TORX RECESS, RoHS-COMPLINT ZINC

14 TYPICL PPLICTION: SELF-RILLING PPLICTIONS ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: PSW SM S0GN = PN-L-SCREW, SHEET METL, RILL POINT - X / LG,, PHILLIPS RIVE, SEMI-GLOSS GREEN PER FE-ST- NO. 0 NOMINL IMETER PITCH L LENGTH TOL. ±.0 IM T ±.0 C PSW SM SM SM PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. The drill point Pan-L-Screw drills a hole, taps, and fastens in steel up to / thick in one operation. In addition, better thread engagement and a tighter fit to the workpiece is realized since the screw produces the optimum hole size.. The screws listed in this series reflect high quality with emphasis on the RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. These Pan-L-Screws are primarily intended for application in steel up to / thick or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter W from the head type code.. Screws are in accordance with SE Standard J-, Self-rilling Tapping Screws, Type S with Style Point.. Screws are stocked zinc plated per STM, Class SC, Type II.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer color are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. PN-L-SCREW E, SHEET METL,, RILL POINT

15 TYPICL PPLICTION: SELF-RILLING PPLICTIONS C UPREE, INC. PRT NO. EXMPLE: PSW SM ZR S0GN = PN-L-SCREW, SHEET METL, RILL POINT - X / LG,, RoHS ZINC, PHILLIPS RIVE, SEMI-GLOSS GREEN PER FE-ST- NO.0 NOMINL IMETER PITCH L LENGTH TOL. ±.0 IM T ±.0 C PSW SM SM SM ZR PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. The drill point Pan-L-Screw drills a hole, taps, and fastens in steel up to / thick in one operation. In addition, better thread engagement and a tighter fit to the workpiece is realized since the screw produces the optimum hole size.. The screws listed in this series reflect high quality with emphasis on the RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. These Pan-L-Screws are primarily intended for application in steel up to / thick or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, omit the letter W from the head type code.. Screws are in accordance with SE Standard J-, Self-rilling Tapping Screws, Type S with Style Point.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer color are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. PN-L-SCREW E, SHEET METL,, RILL POINT, RoHS-COMPLINT ZINC

16 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT IMENSIONS RE IN mm ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: MPS M SN = METRIC PN-L-SCREW, M X 0,mm S X mm LG, LLOY, PHILLIPS RIVE, SEMI-GLOSS ROWN PER FE-ST- NO. 0 NOMINL IMETER PITCH L LENGTH TOL. ±0, TOL. ±0, TOL. ±0, IM T ±0,0 M, 0,,0, 0, MPS M M M M M,0,,0,0,0 0, 0, 0, 0,,0 PHILLIPS RIVE SCL0,0,,0,0,,,,,,0 0,,0,0,,. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, order head type code MSP.. Screws are in accordance with SME Standard No...M.. Screws are alloy steel and are stocked zinc plated in accordance with STM, Class SC, Type II.. Pan-L-Screws are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - METRIC PN-L-SCREW E, METRIC, LLOY

17 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT IMENSIONS RE IN mm PRT NO. EXMPLE: MPS M ZR SGY = C UPREE, INC. METRIC PN-L-SCREW, M X 0, S X mm LG,, RoHS ZINC, PHILLIPS RIVE, SEMI-GLOSS GRY PER FE-ST- NO. NOMINL IMETER PITCH L LENGTH TOL. ±0, TOL. ±0, TOL. ±0, IM T ±0,0 MPS M M M M M M,,0,,0,0,0 0, 0, 0, 0, 0,,0 ZR PHILLIPS RIVE SCL0,0,0,,0,0,,,,,,,0 0, 0,,0,0,,. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, order head type code MSP.. Screws are in accordance with NSI/SME Standard No...M.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Pan-L-Screws are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - METRIC PN-L-SCREW E, METRIC, LLOY, RoHS-COMPLINT ZINC

18 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT IMENSIONS RE IN mm PRT NO. EXMPLE: MPS M CP SN = C UPREE, INC. METRIC PN-L-SCREW, M X 0,mm S X mm LG, CORROSION RESISTNT, PHILLIPS RIVE, SEMI- GLOSS ROWN PER FE-ST- NO. 0 NOMINL IMETER PITCH L LENGTH TOL. ±0, TOL. ±0, TOL. ±0, IM T ±0,0 M, 0,,0, 0, MPS M M M M M,0,,0,0,0 0, 0, 0, 0,,0 CP CRES PHILLIPS RIVE SCL0,0,,0,0,,,,,,0 0,,0,0,,. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, order head type code MSP.. Screws are in accordance with SME Standard No...M.. Screws are 00 series corrosion resistant steel and are stocked passivated.. Pan-L-Screws are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - METRIC PN-L-SCREW E, METRIC, CRES, RoHS-COMPLINT

19 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT IMENSIONS RE IN mm PRT NO. EXMPLE: MPS M CT LGY = C UPREE, INC. METRIC PN-L-SCREW, M X 0,mm S X mm LG, CORROSION RESISTNT, TORX RECESS, LUSTER- LESS GRY PER FE-ST- NO. NOMINL IMETER PITCH L LENGTH TOL. ±0, TOL. ±0, TOL. ±0, IM T ±0,0 E MPS M M M M,,0,0,0 0, 0, 0,,0 CT CRES TORX RECESS SCL0,,0,0,,,,,0,0,0,, T T T T0. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.. The screws listed in this series reflect high quality with emphasis on the forming of the Torx recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. For color-coated screw less washer, order head type code MSP.. Screws are in accordance with SME Standard No...M, except for the Torx recess.. Screws are 00 series corrosion resistant steel and are stocked passivated.. Pan-L-Screws are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - METRIC PN-L-SCREW E, METRIC, CRES, TORX RECESS, RoHS-COMPLINT

20 Screws With Captive Washer, Color-Matched This series of screws offers many of the same features as PN-L-SCREWS and is intended for applications requiring both flush-mounted hardware and a low profile washer. Such applications include attaching hollow-core honeycomb colored panels in the crew station and interior of aircraft, attaching fabric-covered interior panels such as those found in aircraft interiors, special-purpose vehicles, and similar applications. Stake Fastener Company -0

21 TYPICL PPLICTION: SECURING INSTRUMENTS WITH LIMITE SPCE TO SH PNELS C UPREE, INC. PRT NO. EXMPLE: SCFW C S0L = PN SCREW w/cptive NYLON FLT WSHER,.- X / LG,, PHILLIPS RIVE, LUE PER FE-ST- NO. SIZE L LENGTH TOLERNCE IMENSIONL T C C.0- UNC SCFW C C C.-0 UNJC-.- UNJC-.- UNJC- LLOY CMIUM PLTE PHILLIPS RIVE SCL F.0- UNJF The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. Inventory of all sizes listed in the table and colors listed in the forward section of this catalog are carried in stock to assure prompt deliveries. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV Screws with Material code meet all requirements of NS00 series, including thread size.0- which is not listed as part of the NS specification. Screws covered on this document with other than Material code meet all requirements of NS00 series, except for plating requirements.. Plating: Code : cadmium plated in accordance with QQ-P-, Type II, Class.. Threads are in conformance with MIL-S- and H- Federal Handbook for threads, except parts with thread code C which are in accordance with MIL-S-.. Screw lengths are expressed in code for /-inch increments. Lengths not listed in above table may be specified. Contact factory to determine availability.. These screw/washer assemblies are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. SCREW / FLT WSHER E PN w/cptive NYLON FLT WSHER, MCHINE, LLOY

22 TYPICL PPLICTION: SECURING INSTRUMENTS WITH LIMITE SPCE TO SH PNELS C UPREE, INC. PRT NO. EXMPLE: SCFW C ZR S0G = PN SCREW w/cptive NYLON FLT WSHER,.- X / LG,, RoHS ZINC, PHILLIPS RIVE, SEMI- GLOSS EIGE PER FE-ST- NO. SIZE L LENGTH IMENSIONL T C SCFW C C C.0- UNC-.-0 UNJC-.- UNJC- ZR PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws meet all requirements of NS00 series except for plating (see spec #), including thread size.0- which is not listed as part of the NS specification.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Threads are in conformance with MIL-S- and H- Federal Handbook for threads.. These screw/washer assemblies are suitable for applications with temperatures up to F.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. SCREW / FLT WSHER E PN w/cptive NYLON FLT WSHER, MCHINE, LLOY, RoHS-COMPLINT ZINC

23 TYPICL PPLICTION: SECURING INSTRUMENTS WITH LIMITE SPCE TO SH PNELS PRT NO. EXMPLE: SCFW C CP S0N = C UPREE, INC. PN SCREW w/cptive NYLON FLT WSHER,.- X / LG, COR. RES., PHILLIPS RIVE, SEMI-GLOSS ROWN PER FE-ST- NO. SIZE L LENGTH TOLERNCE IMENSIONL T C C C SCFW C C C CP CRES PHILLIPS RIVE SCL F.0- UNF-. The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging which increases the basic tensile strength of the corrosion resistant steel by %. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the panel.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the panel surface by the compression of the nylon washer.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specifi cation in order to eliminate mismating and subsequent damage to the drive recess and coating material.. Inventory of all sizes listed in the table and colors listed in the forward section of this catalog are carried in stock to assure prompt deliveries. Lengths not listed are also available on order Screws are corrosion resistant steel (CRES) and meet all requirements of MS () and MS (UNF-).. Screws are stocked passivated per SE-MS-0.. Threads are in conformance with MIL-S- and H- Federal Handbook for threads.. Screw lengths are expressed in code for /-inch increments. Lengths not listed in above table may be specified, however, contact factory to determine availability.. Washer color is achieved by molding with pigmented nylon per STM 0. Natural (translucent) washer is furnished with polished head screw.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - SCREW / FLT WSHER E PN w/cptive NYLON FLT WSHER, MCHINE, CRES, RoHS-COMPLINT

24 TYPICL PPLICTION: SECURING PNELS WHERE LIQUI-TIGHT SEL IS ESIRE. C UPREE, INC. PRT NO. EXMPLE: FHW F S0WH = 0 FLT SCREW w/cptive NYLON SELING WSHER,.0- X / LG,, PHILLIPS RIVE, SEMI- GLOSS WHITE PER FE-ST- NO. ( SPECIFICTION FOR CLSS OF FIT) SIZE L LENGTH CP IMENSIONL T E F SHRP FHW F.0- UNF CRES PHILLIPS RIVE PHILLIPS RIVE SCL Screws are furnished with captive nylon sealing washer. When installed in recommended clearance hole this assembly provides a liquid-tight seal.. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The thermosetting coating material is both abrasion and solvent resistant. Screw heads are cleaned and prepared for maximum adhesion of the coating material.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws with material code CP meet all requirements of MS. Material is 00 series corrosion resistant steel. Screws are passivated per SE-MS-0. Screws of this material have a class thread fit per FE-ST-H/.. Screws with material code meet all requirements of NS. Screws are stocked cadmium plated per QQ-P-, Type II, Class. Screws of this material have a class thread fit per MIL-S-.. Washer color matches screw head color and is achieved by molding with pigmented nylon per STM 0.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples.. For an assembly with uncoated screw and natural colored sealing washer, order color code N0N. SELING SCREW E 0 FLT w/cptive NYLON WSHER, MCHINE, LLOY & CRES

25 TYPICL PPLICTION: SECURING UPHOLSTERY-COVERE PNELS ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: OHCW SM S0YE = OVL SCREW w/cptive NYLON WSHER, SHEET METL, - X / LG,, PHILLIPS RIVE, SEMI-GLOSS YELLOW PER FE-ST- NO. NOMINL IMETER PITCH L LENGTH TOL.±.0 IM T ±.0 C OHCW SM PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. Type thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the screw where hole misalignment could cause problems.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. These screw assemblies are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. These screw assemblies are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws are in accordance with NSI/SME Standard No..., Recessed Head Tapping Screws, Type.. Screws are stocked zinc plated per STM, Class SC, Type II.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - UPHOLSTERY SCREW E OVL w/cptive NYLON WSHER, SHEET METL,

26 TYPICL PPLICTION: SECURING UPHOLSTERY-COVERE PNELS C UPREE, INC. PRT NO. EXMPLE: OHCW SM ZR S0YE = OVL SCREW w/cptive NYLON WSHER, SHEET METL, - X / LG,, RoHS ZINC, PHIL- LIPS RIVE, SEMI-GLOSS YELLOW PER FE-ST- NO. NOMINL IMETER PITCH L LENGTH TOL.±.0 IM T ±.0 C OHCW SM ZR PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. Type thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the screw where hole misalignment could cause problems.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. These screw assemblies are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. These screw assemblies are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws are in accordance with SME Standard No..., Recessed Head Tapping Screws, Type.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. UPHOLSTERY SCREW E OVL w/cptive NYLON WSHER, SHEET METL,, RoHS-COMPLINT ZINC

27 TYPICL PPLICTION: SECURING UPHOLSTERY-COVERE PNELS ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: OHCWL SM SGY = OVL SCREW w/cptive LRGE O.. NYLON WSHER, SHEET METL, - X / LG,, PHILLIPS RIVE, SEMI-GLOSS GRY PER FE-ST- NO. NOMINL IMETER PITCH L LENGTH TOL.±.0 IM T ±.0 C OHCWL SM PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. Type thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the screw where hole misalignment could cause problems.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. These screw assemblies are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. These screw assemblies are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws are in accordance with SME Standard No..., Recessed Head Tapping Screws, Type.. Screws are stocked zinc plated per STM, Class SC, Type II.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - UPHOLSTERY SCREW E OVL w/cptive LRGE O.. NYLON WSHER, SHEET METL,

28 TYPICL PPLICTION: SECURING UPHOLSTERY-COVERE PNELS C UPREE, INC. PRT NO. EXMPLE: OHCWL SM ZR SGY = OVL SCREW w/cptive LRGE O.. NYLON WSHER, SHEET METL, - X / LG,, RoHS ZINC, PHILLIPS RIVE, SEMI-GLOSS GRY PER FE-ST- NO. NOMINL IMETER PITCH L LENGTH TOL.±.0 IM T ±.0 C OHCWL SM ZR PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction by blending with the background.. Screw heads are formed by cold forging, followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The nylon washer provides a resilient cushion to protect the finished surface of panels and equipment.. self-locking feature to prevent vibration from loosening the screw is achieved by the compression effect of the nylon washer between the screw head and the mounting surface.. seal for moisture, low pressure gases and vapors can be affected between the screw head and the mounting surface by the compression of the nylon washer.. Type thread style offers a fine pitch thread with a sharp gimlet point which aides entry of the screw where hole misalignment could cause problems.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. These screw assemblies are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. These screw assemblies are primarily intended for application in light sheet metal, plywood, certain plastics or material similar in composition where frequent removal is not necessary. They are not recommended for installation into brittle materials.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws are in accordance with SME Standard No..., Recessed Head Tapping Screws, Type.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Washer color is achieved by molding with pigmented nylon per STM 0.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. UPHOLSTERY SCREW E OVL w/cptive LRGE O.. NYLON WSHER, SHEET METL,, RoHS-COMPLINT ZINC

29 TYPICL PPLICTION: SECURING COMPOSITE PNELS C UPREE, INC. PRT NO. EXMPLE: FCM F S0R = 0 FLT SCREW w/cptive METL WSHER,.0- X / LG,, PHILLIPS RIVE, SEMI-GLOSS RE PER FE-ST- NO. SIZE L LENGTH TOLERNCE IM T ±.0 C FCM C C F.- UNC-.- UNC-.0- UNF- PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The metal washer provides a low profile bearing surface to protect the finished surface of panels and equipment.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screw material is heat treated alloy steel. Washer material is low carbon steel.. Screws are stocked cadmium plated per QQ-P-, Type II, Class.. Threads are in conformance with MIL-S- and H- Federal Handbook for threads.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. SCREW / METL WSHER E 0 FLT w/cptive METL WSHER, MCHINE, LLOY

30 TYPICL PPLICTION: SECURING COMPOSITE PNELS C UPREE, INC. PRT NO. EXMPLE: FCM F ZR S0R = 0 FLT SCREW w/cptive METL WSHER,.0- X / LG, LLOY, RoHS ZINC, PHILLIPS RIVE, SEMI-GLOSS RE PER FE-ST- NO. SIZE L LENGTH IM T ±.0 C FCM C C F.- UNC-.- UNC-.0- UNF- ZR PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The metal washer provides a low profile bearing surface to protect the finished surface of panels and equipment.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screw material is heat treated alloy steel. Washer material is low carbon steel.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS- Compliant.. Threads are in conformance with MIL-S- and H- Federal Handbook for threads.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. SCREW / METL WSHER E 0 FLT w/cptive METL WSHER, MCHINE, LLOY, RoHS-COMPLINT ZINC

31 TYPICL PPLICTION: SECURING COMPOSITE PNELS C UPREE, INC. PRT NO. EXMPLE: FCM F CP SN = 0 FLT SCREW w/cptive METL WSHER,.0- X / LG, COR. RES., PHILLIPS RIVE, SEMI-GLOSS ROWN PER FE-ST- NO. SIZE L LENGTH TOLERNCE IM T ±.0 C FCM F.0- UNF- CP CRES PHILLIPS RIVE SCL The one piece screw and captive washer simplifies handling, installation and removal of attachment hardware.. ttachment hardware, color-matched with the mounting surface eliminates distraction from the information display by blending with the background.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The metal washer provides a low profile bearing surface to protect the finished surface of panels and equipment.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screw and washer material is 00 series corrosion resistant steel (Cres).. Screws and washers are passivated per SE-MS-0.. Threads are in conformance with H- Federal Handbook for threads.. Screw head coating and washer colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customerfurnished color chips or samples. SCREW / CPTIVE METL WSHER E 0 FLT w/cptive METL LG O.. WSHER, MCHINE, CRES, RoHS-COMPLINT

32 ecorative Color-Coated Screws Stake Fastener Co. offers industry standard fasteners with color-coated heads. This series of screws, including flat head, oval head and button head, combine the same features of high tensile strength material with the durable thermosetting coating material and colors as used for PN-L-SCREWS. The thermosetting coating material used in combination with the relatively hard screw heads is resistant to abrasion and screw driver damage. This feature virtually eliminates the need for touch up painting after assembly. Stake Fastener Company -0

33 PRT NO. EXMPLE: S F ZR LN = C UPREE, INC. PN SCREW,.0- X / LG, LLOY, RoHS-ZINC PLT, PHIL- LIPS RIVE, LUSTERLESS ROWN PER FE-ST- NO. 00 S C C C C F C F SIZE.0- UNC-.-0 UNJC-.- UNJC-.- UNJC-.0- UNJF-.- UNC-.- UNJF- L LENGTH Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material ZR LLOY PHILLIPS RIVE RoHS-COMPLINT ZINC PLTE SCL0 IM T ±.0. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. Length code designates nominal length in /-inch increments (for example, length code = /-inch long screw).. Screws meet the requirements of NS00 series, including thread size.0- and.- which are not listed as part of the NS specification, except for plating requirements.. Plating: Zinc plate IW STM, Class SC, Type VI-yellow, hexavalent chromium free, RoHS-compliant.. Threads are in conformance with MIL-S-, except parts with thread codes C & C which are IW MIL-S-.. Thermosetting coating material is applied to screw head only, threads are free of coating.. Screw head coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. MX MIN MX MIN RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW PN, MCHINE, LLOY, RoHS-COMPLINT ZINC

34 PRT NO. EXMPLE: S F LN = C UPREE, INC. PN SCREW,.0- X / LG, LLOY, CMIUM PLT, PHILLIPS RIVE, LUSTERLESS ROWN PER FE-ST- NO. 00 S C C C C F C F SIZE.0- UNC-.-0 UNJC-.- UNJC-.- UNJC-.0- UNJF-.- UNC-.- UNJF- L LENGTH Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material LLOY PHILLIPS RIVE SCL0 IM T ±.0. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. Length code designates nominal length in /-inch increments (for example, length code = /-inch long screw).. Screws meet the requirements of NS00 series, including thread size.0- and.- which are not listed as part of the NS specification, except for plating requirements.. Screws are cadmium plated per QQ-P-, Type II, Class.. Threads are in conformance with MIL-S-, except parts with thread codes C & C which are IW MIL-S-.. Thermosetting coating material is applied to screw head only, threads are free of coating.. Screw head coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. MX MIN MX MIN RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW PN, MCHINE, LLOY

35 C UPREE, INC. PRT NO. EXMPLE: S F CP SGY = PN SCREW,.0- X / LG, CORROSION RESISTNT, PHILLIPS RIVE, SEMI-GLOSS GRY PER FE-ST- NO. S C C C C C F F SIZE L LENGTH Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material CP CRES PHILLIPS RIVE SCL0 IM T. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. Length code designates nominal length in /-inch increments (for example, length code = /-inch long screw).. Screws meet all requirements of MS () and MS (UNF-).. Screws are stocked passivated per SE-MS0.. Threads are in conformance with H- Federal Handbook for threads.. Thermosetting coating material is applied to screw head only, threads are free of coating.. Screw head coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. MX MIN MX MIN RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW PN, MCHINE, CORROSION RESISTNT, RoHS-COMPLINT

36 ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: HCS F SL = UTTON SCREW, - X / LG,, HEXGON SOCKET, SEMI-GLOSS LUE PER FE-ST- NO. HCS. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The thermosetting coating material is both abrasion and solvent resistant. Screw heads are cleaned and prepared for maximum adhesion of the coating material.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material. C C C C F C C SIZE.0- UNRC-.-0 UNRC-.- UNRC-.- UNRC-.0- UNRF-.- UNRC-.- UNRC-. The screws listed in this series reflect high quality with emphasis on the forming of the hexagon socket to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material. REV 0- - RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE L LENGTH The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. HEXGON SOCKET SCL0 T. Screws are in accordance with NSI/SME Standard No.., Socket utton Head Cap Screws.. Screws are alloy steel and are stocked zinc plated in accordance with STM, Class SC, Type II.. Threads are in conformance with H- Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. MX.. MX E SCREW UTTON, MCHINE, LLOY

37 PRT NO. EXMPLE: HCS C ZR S0L = C UPREE, INC. UTTON SCREW, - X / LG,, RoHS ZINC, HEXGON SOCKET, SEMI-GLOSS LUE PER FE-ST- NO. HCS. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The thermosetting coating material is both abrasion and solvent resistant. Screw heads are cleaned and prepared for maximum adhesion of the coating material.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material. C C C C F C SIZE.0- UNRC-.-0 UNRC-.- UNRC-.- UNRC-.0- UNRF-.- UNRC-.- UNRC-. The screws listed in this series reflect high quality with emphasis on the forming of the hexagon socket to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material. REV 0- - L LENGTH C RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. ZR HEXGON SOCKET RoHS COMPLI- NT ZINC PLTE SCL0 T. Screws are in accordance with NSI/SME Standard No.., Socket utton Head Cap Screws.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Threads are in conformance with H- Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. MX... MX E SCREW UTTON, MCHINE, LLOY, RoHS-COMPLINT ZINC

38 C UPREE, INC. PRT NO. EXMPLE: HCS F C SL = UTTON SCREW, - X / LG, CORROSION RESISTNT, HEXGON SOCKET, SEMI-GLOSS LUE PER FE-ST- NO. HCS. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. The thermosetting coating material is both abrasion and solvent resistant. Screw heads are cleaned and prepared for maximum adhesion of the coating material.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material. C C C C F C C SIZE.0- UNRC-.-0 UNRC-.- UNRC-.- UNRC-.0- UNRF-.- UNRC-.- UNRC-. The screws listed in this series reflect high quality with emphasis on the forming of the hexagon socket to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material. REV 0- - RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE L LENGTH The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. C CRES HEXGON SOCKET SCL0 T. Screws are in accordance with NSI/SME Standard No.., Socket utton Head Cap Screws.. Screws are 00 series corrosion resistant steel and are stocked passivated per SE-MS-0.. Threads are in conformance with H- Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. MX.. MX E SCREW E UTTON, MCHINE, CRES, RoHS-COMPLINT.

39 TYPICL PPLICTION: SECURING PNELS N RCK MOUNTE EQUIPMENT C UPREE, INC. PRT NO. EXMPLE: WH R SG = WSHER SCREW,.0- UNF- X / LG, / GRIP, LLOY, CRUCIFORM RECESS, SEMI-GLOSS EIGE PER FE-ST- NO. SIZE RECESS / LENGTH IM T NSM H WH.- UNF-.- UNC-.0- UNF-.- UNF- ESIGNTES RECESS & PRT LENGTH R ESIGNTES CRUCIFORM RECESSE SCREWS TLE FOR VILLE LENGTHS LLOY PER NSM SCL L LENGTH TLE : VILLE IMETERS & LENGTHS G SH NUMERS FOR CRUCIFORM RECESSE SCREWS GRIP.-UNF-.-UNC-.0-UNF-.-UNF- ± / (#-) (#-) (#-) (/-) / / R R R R / / R R R R / / R R R R / / R R R R / / R R R R / / R R R R / / R R R R / / R R R R / R R R R -/ / R R R R -/ / R R R R -/ / R R R R -/ -/ R R R R -/ -/ R R R R -/ -/ R R R -/ -/ R R0 R0 R0 -/ R R R R RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV E SCREW WSHER, MCHINE, LLOY, PLTE (SHEET OF )

40 . Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant.. The screws listed in this series reflect high quality with emphasis on the forming of the cruciform recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are NSM standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production.. Screws meet all requirements of NSM.. Screw material is alloy steel per NSM.. Screws are cadmium plated per MS-QQ-P-, Type II, Class or zinc plated per STM, Fe/Zn, Type II, as per NSM.. Threads are in conformance with FE-ST-H/, Federal Handbook for threads.. Thermosetting coating material is applied to screw head only. Threads are free of coating.. Screw head coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples.. Previous to NSM, Revision (released 0-JUN-), the nominal length ( L dimension) did not include the end chamfer. Part inventory manufactured to previous revisions may be procured and used until stock is depleted. For further details, refer to Stake Fastener Co. dwg no RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV E SCREW WSHER, MCHINE, LLOY, PLTE (SHEET OF )

41 C UPREE, INC. PRT NO. EXMPLE: FH F S0YE = 0 FLT SCREW,.0- X / LG,, PHILLIPS RIVE, SEMI-GLOSS YELLOW PER FE-ST- NO. SIZE L LENGTH IMENSIONL T C SHRP S. MIN. FH C C C.-0 UNJC-.- UNJC-.- UNJC- PHILLIPS RIVE SCL F.0- UNJF Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws meet all requirements of NS. Screws are stocked cadmium plated per QQ-P-, Type II. Class.. Threads are in conformance with MIL-S- and H Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW 0 FLT, MCHINE, LLOY, PLTE

42 C UPREE, INC. PRT NO. EXMPLE: FH F ZR S0YE = 0 FLT SCREW,.0- X / LG,, RoHS ZINC, PHILLIPS RIVE, SEMI-GLOSS YELLOW PER FE-ST- NO. SIZE L LENGTH IMENSIONL T C SHRP S. MIN. FH C C C.-0 UNJC-.- UNJC-.- UNJC- ZR PHILLIPS RIVE SCL F.0- UNJF Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws meet all requirements of NS series except for plating (see spec #).. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS- Compliant.. Threads are in conformance with MIL-S- and H Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. E SCREW 0 FLT, MCHINE, LLOY, RoHS-COMPLINT ZINC

43 C UPREE, INC. PRT NO. EXMPLE: FH F CP GL = 0 FLT SCREW.0- X / LG, CORROSION RESISTNT, PHILLIPS RIVE, GLOSS LUE PER FE-ST- NO. 00 SIZE L LENGTH IMENSIONL T C SHRP S. MIN. FH C C C CP CRES PHILLIPS RIVE SCL F.0- UNF Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws meet all requirements of MS. Material is 00 series corrosion resistant steel. Screws are passivated per SE-MS-0.. Threads are in conformance with H Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW 0 FLT, MCHINE, CRES, RoHS-COMPLINT

44 PRT NO. EXMPLE: FHC F CP S0R = C UPREE, INC. FLT SCREW.0- X / LG, CORROSION RESISTNT, PHILLIPS RIVE, SEMI-GLOSS RE PER FE-ST- NO. SIZE L LENGTH IMENSIONL T C SHRP S. MIN. FHC C C C CP CRES PHILLIPS RIVE SCL F.0- UNF Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect aircraft quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws meet all requirements of MS () and MS0 (UNF-). Screws are passivated per SE-MS-0.. Threads are in conformance with H Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW FLT, MCHINE, CRES, RoHS-COMPLINT

45 IMENSIONS RE IN mm PRT NO. EXMPLE: FHM M CP GGY = C UPREE, INC. FLT METRIC SCREW, M X 0. S X mm LG, CORROSION RESISTNT, CROSS RECESS, COTE GLOSS GRY PER FE-ST- NO. NOMINL IMETER L TOL ± 0. LENGTH TOL ± 0. TOL ± 0. TOL ± 0. PITCH REF IM T REF FHM M M M M M M CP CRES CROSS RECESS SCL Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production.. Screws meet the requirements of IN, Metric Machine Screws, Cross Recess. imensions shown in above table are for reference only; refer to current revision of IN for dimensions and tolerances. imensions are in mm.. Screw material is (00 series) corrosion resistant steel (CRES), passivated.. Screw head coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW 0 METRIC FLT, METRIC, CRES, RoHS-COMPLINT

46 - RECESS L ' 0 IMENSIONS RE IN mm PRT NO. EXMPLE: FHM M CT S0R = STRIGHT SIE OR RIUS PERMISSILE C UPREE, INC. FLT METRIC SCREW, M X 0. S X mm LONG, CORROSION RESISTNT, TORX RECESS, COTE SEMI-GLOSS RE PER FE- ST- NO. M NOMINL IMETER. L LENGTH & RECESS TOL ± 0. TOL ± 0. TOL ± 0. PITCH ESCRIPTION 0. SHRP. IMENSIONL T S. MIN. MX. RIVE SIZE T FHM M M M M M CT CRES TORX RECESS SCL T T T T T0. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. TORX is a registered trademark of Camcar Textron.. The screws listed in this series reflect high quality with emphasis on the forming of the TORX recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production.. Screws meet the requirements of SME..M, Metric Machine Screws, except with a TORX Recess. imensions shown in above table are for reference only; refer to current revision of SME..M for dimensions and tolerances. imensions are in mm.. Screw material is 00 series corrosion resistant steel (CRES), passivated.. Screw head coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. E SCREW 0 METRIC FLT, METRIC, CRES, TORX RECESS

47 ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: OHC C SL = OVL SCREW.- X / LG, LLOY, PHILLIPS RIVE, SEMI-GLOSS LUE PER FE-ST- NO. SIZE L LENGTH IMENSIONL T H O SHRP S. MIN. REF. MX. OHC C C C PHILLIPS RIVE SCL F.0- UNF Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws are in accordance with SME Standard No..., Recessed Head Machine Screws.. Screws are alloy steel and are stocked zinc plated in accordance with STM, Class SC, Type II.. Threads are in conformance with H Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. E SCREW E OVL, MCHINE, LLOY, PLTE

48 C UPREE, INC. PRT NO. EXMPLE: OHC C ZR SL = OVL SCREW.- X / LG, LLOY, PHILLIPS RIVE, SEMI-GLOSS LUE PER FE-ST- NO. SIZE L LENGTH IMENSIONL T H O SHRP S. MIN. REF. MX. OHC C C C F UNF- ZR PHILLIPS RIVE RoHS- COMPLI- NT ZINC PLTE SCL Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws are in accordance with SME Standard No..., Recessed Head Machine Screws.. Screws are zinc plated per STM, Class SC- (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Threads are in conformance with H Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. E SCREW OVL, MCHINE, LLOY, RoHS-COMPLINT

49 C UPREE, INC. PRT NO. EXMPLE: OHC C CP SL = OVL SCREW.- X / LG, CORROSION RESISTNT, PHILLIPS RIVE, SEMI-GLOSS LUE PER FE-ST- NO. SIZE L LENGTH IMENSIONL T H O SHRP S. MIN. REF. MX. OHC C C C CP CRES PHILLIPS RIVE SCL F.0- UNF Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. Screws are in accordance with SME Standard No..., Recessed Head Machine Screws.. Screws are 00 series corrosion resistant steel and are stocked passivated per SE-MS-0.. Threads are in conformance with H Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW OVL, MCHINE, CRES, RoHS-COMPLINT

50 ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: OHC C T S0GY = OVL SCREW.- X / LG,, TORX RECESS, SEMI-GLOSS GRY PER FE-ST- NO. OHC. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible. C C F C SIZE UNF-.- UNF-. TORX is a registered trademark of Camcar Textron.. The screws listed in this series reflect high quality with emphasis on the forming of the TORX recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry L LENGTH T LLOY TORX RECESS standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. SCL0 IMENSIONL T. Screws are in accordance with SME Standard No..., Recessed Head Machine Screws, except for recess.. Screws are stocked zinc plated in accordance with STM, Class SC, Type II.. Threads are in conformance with H Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. SHRP....0 S. MIN E REF. T T T T0 H O MX..... RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW OVL, TORX RECESS, MCHINE, LLOY, PLTE

51 PRT NO. EXMPLE: OHC C ZRT S0GY = C UPREE, INC. OVL SCREW.- X / LG,, RoHS ZINC, TORX RECESS, SEMI-GLOSS GRY PER FE-ST- NO. OHC. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible. C C F C SIZE UNF-.- UNF-. TORX is a registered trademark of Camcar Textron.. The screws listed in this series reflect high quality with emphasis on the forming of the TORX recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The thread diameters and lengths listed in the table are industry L LENGTH ZRT LLOY TORX RECESS standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order. SCL0 IMENSIONL T. Screws are in accordance with NSI/SME Standard No..., Recessed Head Machine Screws.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Threads are in conformance with H Federal Handbook for threads.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. SHRP....0 S. MIN E REF. T T T T0 H O MX..... RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW OVL, TORX RECESS, MCHINE, LLOY, RoHS-COMPLINT ZINC

52 ZINC PLTING ON THIS PRT SERIES IS EING PHSE OUT IN FVOR OF N RoHS-COMPLINT ZINC C UPREE, INC. PRT NO. EXMPLE: OH SM G0R = 0 OVL SHEET METL SCREW, - X / LG,, PHILLIPS RIVE, GLOSS RE PER FE-ST- NO. NOMINL IMETER PITCH RECOMMENE INSTLLTION HOLE SIZE L LENGTH TOL. ±.0 T H O SHRP S. MIN. REF. MX. OH SM SM SM... PHILLIPS RIVE SCL Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The recommended installation hole sizes shown in the table are for light gage (.00) sheet metals. Compensation should be made for other materials and thicknesses. Refer to NSI.., ppendix VI. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. These screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. Screws are in accordance with SME Standard No..., Recessed Head Tapping Screws, Type thread.. Screws are stocked zinc plated per STM, Class SC, Type II.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. E SCREW 0 OVL, SHEET METL,

53 C UPREE, INC. PRT NO. EXMPLE: OH SM ZR G0R = 0 OVL SHEET METL SCREW, - X / LG,, RoHS ZINC, PHILLIPS RIVE, GLOSS RE PER FE-ST- NO. NOMINL IMETER PITCH RECOMMENE INSTLLTION HOLE SIZE L LENGTH TOL. ±.0 T H O SHRP S. MIN. REF. MX. OH SM SM SM... ZR PHILLIPS RIVE RoHS COMPLI- NT ZINC PLTE SCL Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.. Screw heads are formed by cold forging followed by a case hardening and heat treating process which increases the basic tensile strength of the material. The resulting high tensile strength thus eliminates burring and yield of the substrate under the coating material.. Screw heads are cleaned and prepared for maximum adhesion of the coating material. The thermosetting coating material is both abrasion and solvent resistant. Slight overspray on underside of head is permissible.. The screws listed in this series reflect high quality with emphasis on the forming of the Phillips recess to meet design specification.. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.. The recommended installation hole sizes shown in the table are for light gage (.00) sheet metals. Compensation should be made for other materials and thicknesses. Refer to NSI.., ppendix VI.. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.. These screws are capable of forming mating threads in steel plate with a maximum Rockwell hardness of 0- without thread shearing or breakage.. Screws are in accordance with SME Standard No..., Recessed Head Tapping Screws, Type thread.. Screws are zinc plated per STM, Class SC (min), Type VI-yellow, hexavalent chromium free, RoHS-Compliant.. Coating colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E SCREW 0 OVL, SHEET METL, PLTE, RoHS-COMPLINT ZINC

54 Pressure isplacement Stake Fasteners This catalog section covers pressure displacement STKE FSTENERS. These fasteners are designed for use in applications where relatively strong threads are needed in a relatively soft mounting material. These pressure displacement fasteners must be installed into sheet material that is ductile and capable of forming into the knurled recess of the fastener without stress cracking, such as -T or 0-T aluminum. The principle which makes this product unique is the method of installation. The large flange is coined, or pressed, into the sheet until it is flush with the surface. The volume of displaced material is calculated to flow into and fill the void area around the knurled fastener undercut as the fastener is driven into the sheet. The effect of this principle is that deformation or rivet action occurs to the sheet, not to the fastener. Thus, the asic fastener series listed in this catalog may be installed into a relatively soft metal, providing a relatively hard threaded hole, which is flush with the sheet on both surfaces. The type and series fasteners also provide the grip area flush with both surfaces of the sheet after installation. However, in order to provide a self-locking thread feature, a thin-walled appendage is added which includes a spring action deformed thread. The series is used in the same manner of a conventional clinch nut with the screw entering through the grip area. The series is intended for housing the appendage in a thick sheet, such as an edge lighted panel, with the screw entering through the appendage. In both instances the self-locking feature is located on the appendage near the grip area, eliminating the need for the screw length to extend through and out of the fastener. In all cases the fastener should be installed to allow screw threads to enter the side opposite the large flange. When the screw is cinched at installation, the forces are applied against the large flange. Stake Fastener Company -0

55 Pressure isplacement Fasteners The type asic,, and fasteners are designed to be installed using standard presses (mechanical, hydraulic, or impact) commonly found in a shop environment. The tooling required is simply a punch and an anvil which can be installed in the press to be used. For the type asic fastener, both the punch and anvil are flat. For the type and fasteners, a clearance hole (F & G dimensions) is required in the punch for the appendage. See Table below for recommended punch clearance hole size. ue to the wide variety of press equipment available and the simplicity of the punch and anvil required, it is intended that customers fabricate their own punch and anvil to fit their particular equipment and applications. Table - RECOMMENE NVIL CLERNCE HOLES FOR N FSTENERS Installation Guidelines are flush with both surfaces of the sheet (see Figure, INSTLLE). This staking process should be performed in one continuous motion for best results. The amount of pressure to be applied will vary with fastener size, sheet thickness, and type of material used. Installation of a type fastener PP I TOOLING CLERNCE HOLE SIZE F G INSERT C.0-UNC-..0 #. C.-0UNC-..0 #. C.-UNC-.. /. C.-UNC-..0 #. F.0-UNF-.. /. F.-UNF-.00. /. To install the fastener, a mounting hole must be punched or machined into the sheet per dimension E, shown on the part specifications. It is not necessary nor recommended that the mounting hole be deburred prior to installation Place the sheet material with the mounting hole centered over the flat anvil. Locate the fastener with the small flange diameter towards the sheet (see Figure, INSERT) and centered over the mounting hole. Lower the punch over the fastener and locate the fastener appendage into the clearance hole for type and fasteners (see Figure, STKE). pply pressure between the punch and anvil to force the fastener into the sheet until the grip areas STKE INSTLLE Stake Fastener Company -

56 C UPREE, INC. PRT NO. EXMPLE: SF G C SF.0 E F. The pressure displacement principle provides a fastener made of a relatively strong material installed into a relatively soft mounting material.. The basic fastener provides a steel threaded hole in a relatively soft material, flush with both surfaces of the mounting sheet..0 E F.0 E F G H J.0 F G H J L THICKNESS.0 F.. G G G H H H H J L F L F. L L L. High carbon steel (Material Code ) parts are stock items. Parts made of type 0 corrosion resistant steel (MIL-S-) are available, on order, by using Material Code C.. Parts are installed by pressure displacement principle as illustrated by figures. Pressure is applied between two anvils which may be installed in any suitable equipment, such as hydraulic or impact punch presses. Pressure to be applied will vary with fastener size, sheet thickness and type of material used.. J J J J T C C C C F F SIZE.0- UNC-.-0 UNC-.- UNC-.- UNC-.0- UNF-.- UNF-. Sheet material must be ductile and capable of forming into knurled recess of fastener without stress cracking.. In all cases the fastener should be installed to allow screw threads to enter the side opposite the large flange. When the screw is cinched at installation, the forces are applied against the large flange.. Steel fasteners (Material Code ) are made of chrome molybdenum alloy per ISI0 (or equal).. Steel fasteners (Material Code ) are cadmium plated per QQ-P-, Type II, Class. MJ. I Corrosion resistant steel fasteners (Material Code C) are passivated per SE-MS-0. E MTG. HOLE I HIGH CRON ( NOTE ) INSERT STKE INSTLLE RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - FSTENER SIC PRESSURE ISPLCEMENT

57 C UPREE, INC. PRT NO. EXMPLE: SF G C SF SIZE E E E F G G G G GGG. The pressure displacement principle provides a fastener made of a relatively strong material installed into a relatively soft mounting material.. The fastener provides a steel threaded hole in a relatively soft material, flush with both surfaces of the mounting sheet, except for the protruding self-locking appendage. F F H H H HHH J THICKNESS F L F FF L L L LL T C C C C J J JJ JJ F F. High carbon steel (Material Code ) parts are stock items. Parts made of type 0 corrosion resistant steel (MIL-S-) are available, on order, by using Material Code C.. Parts are installed by pressure displacement principle as illustrated by figures. Pressure is applied between a punch and an anvil which may be installed in any suitable equipment, such as hydraulic or impact punch presses. clearance hole is shown in the punch to accommodate the self-locking appendage..0- UNC-.-0 UNC-.- UNC-.- UNC-.0- UNF-.- UNF- RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE Pressure to be applied will vary with fastener size, sheet thickness and type of material used.. Sheet material must be ductile and capable of forming into knurled recess of fastener without stress cracking.. In all cases the fastener should be installed to allow screw threads to enter the side opposite the large flange. When the screw is cinched at installation, the forces are applied against the large flange. REV 0- - C PPENGE & LENGTH E MJ. PP. I. I MTG. HOLE I Steel fasteners (Material Code ) are made of chrome molybdenum alloy per ISI0 (or equal).. Steel fasteners (Material Code ) are cadmium plated per QQ-P-, Type II, Class.. Corrosion resistant steel fasteners (Material Code C) are passivated per SE-MS-0. HIGH CRON ( NOTE ) INSERT STKE INSTLLE FSTENER PRESSURE ISPLCEMENT

58 C UPREE, INC. PRT NO. EXMPLE: SF G C SF. The pressure displacement principle provides a fastener made of a relatively strong material installed into a relatively soft mounting material.. The fastener provides a steel threaded hole in a relatively soft material, flush with both surfaces of the mounting sheet, except for the protruding self-locking appendage. PPENGE THICKNESS T C & LENGTH E SIZE E E E F F F G G G G GGG H H H HHH J F L F FF L L L LL C C C C J J JJ JJ F F. High carbon steel (Material Code ) parts are stock items. Parts made of type 0 corrosion resistant steel (MIL-S-) are available, on order, by using Material Code C.. Parts are installed by pressure displacement principle as illustrated by figures. Pressure is applied between a punch and an anvil which may be installed in any suitable equipment, such as hydraulic or impact punch presses. clearance hole is shown in the punch to accommodate the self-locking appendage..0- UNC-.-0 UNC-.- UNC-.- UNC-.0- UNF-.- UNF- RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - Pressure to be applied will vary with fastener size, sheet thickness and type of material used.. Sheet material must be ductile and capable of forming into knurled recess of fastener without stress cracking.. In all cases the fastener should be installed to allow screw threads to enter the side opposite the large flange. When the screw is cinched at installation, the forces are applied against the large flange. MJ. PP. I. I MTG. HOLE I Steel fasteners (Material Code ) are made of chrome molybdenum alloy per ISI0 (or equal).. Steel fasteners (Material Code ) are cadmium plated per QQ-P-, Type II, Class.. Corrosion resistant steel fasteners (Material Code C) are passivated per SE-MS-0. HIGH CRON ( NOTE ) INSERT STKE INSTLLE FSTENER PRESSURE ISPLCEMENT

59 OCUMENTS N RELTE RWINGS ESCRIE PROUCTS N/OR PROCESSES WHICH MY INVOLVE CORPORTE ESIGNS OR TRE SECRETS. REPROUCTION, ISTRIUTION OR ISCLOSURE TO UNUTHORIZE PERSONS IS PROHIITE WITHOUT EXPRESS PERMISSION, IN WRITING. NOTE # FINISH S-MOLE R G. J. M. TE //0.XXX.XX NGULR SIZE WG. NO. PP TE SCLE SHEET OF REV J.. P. // Special Fasteners Screws with head styles, special washers, drive shapes and thread forms, standard in the industry but not listed in this catalog, can be provided with pre-coated colored heads on order. dditionally, we often employ our expertise in cold heading, screw machine work, threading, injection and transfer molding, and coating processes to develop special items to meet our customer requirements. few samples of these special items are shown below. We invite inquiries for such special items and look forward to working with our customers to provide products that will fulfill the needs of their special fastener application requirements ISOMETRIC VIEW. PRT NO. EXMPLE: SIC SERIES. : VULCNIZE SILICONE RUER.. FINISH: S-MOLE. R K. : CURRENTLY THIS PRT SERIES IS VILLE IN LUSTERLESS LCK. WHITE IS VILLE ON SPECIL ORER TLE FOR P/N S.. PRT IS ESIGNE TO FIT. PNEL MOUNTING HOLE IN.0-INCH THICK PNELS. TLE - VILLE S RUER UMPER. x. TLL CUSTOMER WG PPROX MTCH TO ST SF K LCK S0K WH WHITE SWH NOTICE: PROPRIETRY INFORMTION THIS OCUMENT N LL RELTE UPREE RWINGS RE THE SOLE PROPERTY OF UPREE, INC., N ITS OPERTING IVISIONS..0.0 : --0- C Stake Fastener Company -0

60 TYPICL PPLICTION: COVER FOR UNUSE HOLES C UPREE, INC. PRT NO. EXMPLE: SFHP 00 SN = E HOLE PLUG, TO FIT.0 I HOLE IN.0 THK PNEL, SEMI-GLOSS ROWN PER FE-ST- NO. SERIES NOMINL SIZE ESCRIPTION IMENSIONL T C E F SFHP 00 / MTG HOLE I. 0.0 THK PNEL / MTG HOLE I 0. THK PNEL SCL MX Hole Plugs are color-matched to blend with the mounting surface of panels and equipment.. esigned to snap in and hold firmly in place. Hole Plugs offer a simple cover for unneeded holes.. The durable nylon material allows the product to be snapped out and reused, or left permanently in place for the life of the equipment.. Hole Plug color is achieved by molding with pigmented nylon per STM 0.. Colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer-furnished color chips or samples.. The Hole Plugs are designed to fit holes in panels detailed by dimensions E & F in the above table.. For available colors, see Stock Color List, document no. SCL0. dditional colors will be added upon request.. Sizes or head styles other than those shown herein may be available. Contact factory for further inquiries. RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - E HOLE PLUG MOLE NYLON

61 TYPICL PPLICTION: VERY LIGHT LO RIVET FSTENING GENERLLY IN PLSTIC S C UPREE, INC. PRT NO. EXMPLE: PRR - G0N = LIN PLSTIC RIVET, ROUN H, NOMINL SIZE / HOLE I x / MT L GRIP, NTURL PLSTIC SERIES PRR NOMINL SIZE ESC / I / GRIP / I / GRIP / I / GRIP / I / GRIP / I / GRIP / I / GRIP HOLE SIZE ( IM) FOR RIVET IMETER & GRIP LENGTH.... PPLICTION GRIP ( G IMENSION) G0N NTURL E NYLON SCL0 FOR OTHER VILLE S IMENSIONL T C L N. These nylon blind rivets are intended for applications involving very light loads, generally in plastic materials.. Rivets can be supplied in colors matched to customer requirements. Color can be matched to blend with mounting surfaces or to be a color indicator to suit customer needs.. These nylon blind rivets are installed by placing rivet prongs into panel holes; bring panels together and place rivet head in contact with top panel, and then drive pin into rivet body.. Rivets can be removed by driving pin through and out of rivet, and then removing rivet body from panels. It is recommended to replace these rivets with new once they are removed from an installation.. Rivet material is polyamide nylon resin. Rivets are not loadrated.. Rivets can be supplied in either natural-colored nylon, color code is G0N, or color matched to customer requirements. See Stock Color List, document no. SCL0 for available colors.. Colors are matched to customer requirements. We recommend selection from FE-ST- whenever possible but we are also prepared to match customer furnished color chips or samples.. Recommended panel hole size is listed in above table and is based on application grip length ( G dimension). For example, when using p/n: PRR-G0N in panels where G =., the recommended hole size is. (/ drill). RMON VENUE CHINO, CLIFORNI (0) - FX (0) -0 CGE REV 0- - LIN RIVET ROUN, PLSTIC

62 ppendix - Stock Colors Stake Fastener Company -0

63 Stake Fastener Company -

64 Stake Fastener Company -

65 Stake Fastener Company -

66 ppendix - Technical Notes Screwdrivers Our fasteners are manufactured using high quality materials with emphasis on the forming of the drive recess to meet design specifications. We urge customers to exercise care to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material. We also suggest slightly de-burring the driver tools to remove extreme sharp edges to minimize cutting of the coating materials. This can be achieved by dressing the tool bit with a wire brush as a locksmith does to a newly cut key. Material Handling Parts are carefully packaged before shipment to customers. Parts are bagged, labeled, tightly wrapped, and properly boxed to protect the color coating during shipment. Package quantities are determined by fastener size to provide proper protection. We recommend that parts remain in their original packing material until just before use. If it is necessary to re-package, then necessary care must be exercised to minimize damage from threads rubbing against color-coated surfaces. The color coating material is very durable but it is a coated surface and can be damaged if proper care is not exercised. PN-L-SCREW Tightening Torque Care must be exercised during installation of PN-L-SCREWS to prevent over-tightening due to the nature of the nylon washer material. Overtightening is possible and results in deformed washers. Several factors are involved with determining the proper installation torque, including PN-L-SCREW size, clearance hole size and thread fit. In most applications we recommend tightening until snug and then tightening an additional / to / turn. The compression effect of the nylon washer between the screw head and panel will provide a self-locking feature to prevent vibration from loosening the screw in most applications. Nominal Thread Sizes To conform to accepted industry standard practices, the nominal thread sizes for machine threads which are specified in this catalog (for non-metric items) are called out in decimal inches, instead of using the screw number or fractional diameter as was customary in the past. The following table gives the equivalent of the screw number / fractional size to the decimal size: SCREW IMETER (NUMER or FRCTIONL SIZE) ECIML SIZE / 0. / 0.0 ll products are subjected to our documented ISO 00:0 and S0C quality procedures and are lottraceable. Stake Fastener Company -0

67 ppendix C - etailed Product Listing escription RoHS- Compliant Page PN-L-SCREWS Screws with Captive ecorative Nylon Washer, Color-Matched Screw & Washer -0 Machine Thd, Cadmium Plated lloy, Phillips - Machine Thd, RoHS-Zinc Plated lloy, Phillips - Machine Thd, CRES, Phillips - Machine Thd, Zinc Plated lloy, Torx Machine Thd, Zinc Plated lloy, Torx - Machine Thd, RoHS-Zinc Plated lloy, Torx Machine Thd, RoHS-Zinc Plated lloy, Torx - Specialized Captive Pan-L-Screw for Panels - Sheet Metal Thd, Zinc Plated Steel, Phillips - Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips - Sheet Metal Thd, Zinc Plated Steel, Torx Sheet Metal Thd, Zinc Plated Steel, Torx - Sheet Metal Thd, RoHS-Zinc Plated Steel, Torx Sheet Metal Thd, RoHS-Zinc Plated Steel, Torx - rill Pt-Sheet Metal Thd, Zinc Plated Steel, Phillips - rill Pt-Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips - Metric Thd, Zinc-Plated lloy, Phillips - Metric Thd, RoHS-Zinc Plated lloy, Phillips - Metric Thd, CRES, Phillips - Metric Thd, CRES, Torx - Screws w/ Captive Washer, Color-Matched -0 Pan Hd / Flat Nylon Wshr, Machine Thd, Cadmium Plated lloy, Phillips - Pan Hd / Flat Nylon Wshr, Machine Thd, RoHS-Zinc Plated lloy, Phillips - Pan Hd / Flat Nylon Wshr, Machine Thd, CRES, Phillips - Flat Hd (0 ) / Nylon Wshr, Machine Thd, Cadmium Plated lloy & CRES, Phillips - Oval Hd ( ) / Nylon Trim Wshr, Sheet Metal Thd, Zinc Plated Steel, Phillips - Oval Hd ( ) / Nylon Trim Wshr, Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips - Oval Hd ( ) / Lg Nylon Trim Wshr, Sheet Metal Thd, Zinc Plated Steel, Phillips - Oval Hd ( ) / Lg Nylon Trim Wshr, Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips - Flat Hd (0 ) / Metal Wshr, Machine Thd, Cadmium Plated lloy, Phillips - Flat Hd (0 ) / Metal Wshr, Machine Thd, RoHS-Zinc Plated lloy, Phillips - Flat Hd (0 ) / Metal Wshr, Machine Thd, CRES, Phillips - ecorative Color-Coated Screws -0 Pan Hd, Machine Thd, RoHS-Zinc Plated lloy, Phillips - Pan Hd, Machine Thd, Plated lloy, Phillips - Stake Fastener Company C-0

68 ppendix C - etailed Product Listing (Cont.) escription RoHS- Compliant Page Pan Hd, Machine Thd, CRES, Phillips - utton Hd, Machine Thd, Zinc Plated lloy, Hex Recess - utton Hd, Machine Thd, RoHS-Zinc Plated lloy, Hex Recess - utton Hd, Machine Thd, CRES, Hex Recess - Washer Hd, Machine Thd, Plated lloy, Phillips -. (Cont.) -. Flat Hd (0 ), Machine Thd, Cadmium Plated lloy, Phillips - Flat Hd (0 ), Machine Thd, RoHS-Zinc Plated lloy, Phillips - Flat Hd (0 ), Machine Thd, CRES, Phillips - Flat Hd ( ), Machine Thd, CRES, Phillips - Flat Hd (0 ), Metric Thd, CRES, Cross - Flat Hd (0 ), Metric Thd, CRES, Torx -. Oval Hd ( ), Machine Thd, Zinc Plated lloy, Phillips - Oval Hd ( ), Machine Thd, RoHS-Zinc Plated lloy, Phillips - Oval Hd ( ), Machine Thd, CRES, Phillips - Oval Hd ( ), Machine Thd, Zinc Plated lloy, Torx - Oval Hd ( ), Machine Thd, RoHS-Zinc Plated lloy, Torx - Oval Hd ( ), Sheet Metal Thd, Zinc Plated Steel, Phillips - Oval Hd ( ), Sheet Metal Thd, RoHS-Zinc Plated Steel, Phillips - Pressure isplacement Stake Fasteners -0 Installation Guidelines - Fastener - Type SIC - Fastener - Type - Fastener - Type - Special Fasteners -0 Colored Hole Plug, Nylon - Rivet, lind, Round Head, Plastic - Stake Fastener Company C-

69 L (REF) L C (MX) ' (REF) STRIGHT SIE OR RIUS PERMISSILE Stake Fastener Company has been the industry standard for color-coated screws and fasteners for over fifty years. Our products are suitable for most applications where a decorative, color-matched fastener is required. Stake Fastener Company Ramona ve., Chino, C (0) - Fax: (0) -0 SU-000K REV. --