ALORIS TOOL TECHNOLOGY CO., INC. REV 1/12. All Aloris products are

Size: px
Start display at page:

Download "ALORIS TOOL TECHNOLOGY CO., INC. REV 1/12. All Aloris products are"

Transcription

1 LORIS TOOL TECHNOLOGY CO., INC. 22 CTLOG The Originator of Quick Change Tooling REV ll loris products are proudly made in the US.

2 TLE OF CONTENTS INTRODUCING LORIS INDEXLE TOOL OSTS & SETS New roduct uilt y The Originator of The Quick Change Tool ost For Manual and CNC Lathes The loris Indexable Tool ost allows 4 independent tool holders to be locked to the tool post simultaneously. This allows the operator to do multiple operations by means of indexing the tool post to any of the 24 locking positions. The index positioning and locking is accomplished by the same means as a turret on a CNC Lathe. This is the ultimate in productivity on Manual and CNC Lathes without indexing capabilities. Two standard loris Tool Holders can be mounted with no modification or you can modify some existing loris holders to fit the indexable tool post. TENT ENDING The originator of quick change tooling Industry Standard Repeatability of. Some standard loris Tool Holders will fit if slightly modified ll components heat treated and ground 24 position, precision indexing through heat treated precision ground face gears Increase roduction y % recision engineered to assure repetitive accuracy Full length wedge lock as featured on the traditional loris Tool ost for ultimate rigidity Optionally furnished with anti-rotation key precision fit to lathe compound (eliminates rotation and movement of tool post under extreme cutting conditions) LORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY VENUE O OX 29 CLIFTON, NJ -29 TEL: FX: TOLL FREE:.2. E-MIL: aloris@aloris.com WESITE: REV INDEXLE TOOL OSTS & SETS ON GES -. ll loris products are proudly made in the US. The highest quality lathe tool accessories available Only sizes required for up to 6 inch swing Over forty five years of machine tool manufacturing experience Mounting wrench included with tool post Super recision Quick Change Tool osts, Replacement arts...2 Miniature Quick Change Tool ost (M)... Shank Tool Holders, Quick Change #, #S, #2, #2S, #6, #9, #, #L...4 oring ar Holders, Quick Change #4, #4, #4D, #4D, #, #4, #4, # oring ar Reducer ushings...6 Drilling Holders, Quick Change #, #C, #, #, #4, #, #2, # Tapered Sockets... 9 Universal Tool Holders, Quick Change #2, #, #22... Cartridges CRT-2, CRT-, CRT-4... Carbide Insert Cutting Tools with djustable Chipbreaker, Quick Change #2, #2N...2 Combination Carbide Insert Cutting Tools with djustable Chipbreaker, Quick Change #6, #6N...4 Carbide Insert Cutting Tools, Quick Change #2, #, #L...6 Carbide Insert rofiling Tool Holders, Quick Change #, #L... 9 Knurling Tool Holders, Quick Change Knurls #, # Threading Holders, Quick Change #, #, # lades & Inserts, Insert Cartridges Universal arting lade Holder #, #R loris Wedge-Lock Carbide Insert lades, arting lades Cut-Off & Grooving Holders, Quick Change #, # loris Wedge-Lock Carbide Cut-Off Inserts...24 Super-recision Single-Dovetail Heads, Universal Mounting...2 Miniature (M) Tool ost & Tool Holders...26 Super-recision Intro-ro Sets iece Starter Set iece Sets, S Sets...2 Qualified Tool osts & Holders...2 Recommendations, Tool osts to Lathes, T Nut Ordering Info...29 Indexable Tool osts, Options, T Nut Ordering Info, Replacement arts... Indexable Tool Holders, Starter Sets, loris Wedge-Lock Carbide Cut-Off Inserts, lades...2 Double-Lock Tool Holders, D Series...4 rofiling Tool Holders, T-, T-L... Chamfering, Facing & Turning Holders, SIH Series... Turning Holders, T-2, T-2N, Socket Screw T -Wrenches...6 Threading Tools, T-, T-6 Cartridges, lades... djustable Shank Tool Holders, T-2, T-4... Mini Swivel-Cartridge Tool Holders, T Series T-S, T-S, T-S/T-, T-, T-, Replacement arts...9 oring ars, Cartridge-Head, C 4-2, -2, 6-, Replacement arts...4 oring ars djustable Chip reaker C-, 2,, 4, Replacement arts...4 oring ars, Square Tool it -, 2,, 4,, 6,,, 9,,...4 oring ars, djustable Lead ngle S-, 2,, 4,, 6/L-, 2,, 4,, oring ars, C-, 2,, 4,, 6,, S...4 Internal Threading ars, T Series Right or Left Sizes thru...44 Knurling Holder, djustable, T-9 & Combo CNC ar uller Knurling Tool, T Spindle & Collet Stops Universal, Replacement arts...46 SGIH Cut-Off & Grooving lades & CNC Tool locks Series SGTN...4 loris # Cut-Off System...4 Carbide Inserts and Lay Down Threading Inserts...49 Cut-Off and Grooving Inserts GT...4 Fax Order Form... olicies & rocedures...6 age

3 age 2 LORIS SUER RECISION QUICK CHNGE TOOL OSTS FOR MNUL ND CNC LTHES GURNTEED LSTING REETITIVE CCURCY TO WITHIN MILLIONTHS FETURES: ONLY SECOND TO CHNGE TOOLS RUGGED NO CHTTER OR VIRTION NO TIME WSTED WITH SHIMS UNLIMITED VERSTILITY SFE ND SIMLE TO OERTE SEED YOUR LTHE OERTIONS U TO 9% GURNTEED* The LORIS Super recision tool post provides built-in quick tool changing versatility and flexibility combined with wide range, positive control and repetitive accuracy to meet the most exacting working tolerances. Whether for tool room or production work, the loris line of tool posts and holders will save set-up time and increase production on all types of lathe operations from fine precision work to heavy duty cutting without chatter or vibration. Comparison with other tools will highlight loris superiority: the quick change tool holder eliminates time consuming set-up no tool post indexing necessary, no indexing balls, no need for shims, no need to disturb the basic set-up. This new catalog includes the newest developments produced by loris design engineers in their constant search for new and better products that will increase productivity and reduce operating costs of all machine tool operations. loris super precision tool post atented locking device assembly Worm Sliding tapered gib Handle Screw ushing all Felt Seal ositive locking action is achieved by simply turning handle which is fastened to worm. Worm is free turning around screw bushing. s screw bushing restricts vertical movement of worm, action of CME threads causes movement of sliding tapered gib. Movement of gib provides QUICK-OSITIVE locking or unlocking of tool holder mounted on tool post dovetail. *This guarantee does not include repair or replacement due to misuse, abuse, accidental damage or normal wear. loris Miniature (M) Tool ost lso on age 26 loris Super-recision Tool ost recision engineered to assure repetitive accuracy. dvanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on any engine lathe, bench or CNC lathe, for a wide range of operations from fine precision work to heavy duty cutting. X SERIES : X $. C D E H R /6 4 /6 SWING U TO 2" LORIS QUICK CHNGE TOOL OSTS X X CX C D E OSTS: RELCEMENT RTS Not Interchangeable with Indexable Tool ost arts. Super precision single dovetail tool post designed for jewelers and miniature lathes. Three holders can hold six tools for various operations. Height adjustment is provided for each tool. Tool holder capacity: / " / ". Tool post dimensions: / 2" x / 2" x / 4". See page 26 for toolholders and pricing. ORDERING INFORMTION X SERIES CX SERIES C SERIES D SERIES E SERIES : X $44. C D E H R /6 /6 : CX $92. SWING SWING U TO C D E H R U TO " 6 " : C $4. C D E H R *To order tool holders see page 4 thru 2. *To order sets see pages 26 and 2. *ll loris Super recision Quick Change Tool osts are furnished with a completely machined T -bolt to fit your machine at no charge. lease fill out chart and fax. T OLTS X-T* X-T* CX-T* C-T* RICE E. $49.2 $2. $6. $. HNDLES X-HDL* X-HDL* CX-HDL* RICE E. $6. $9. $4. C-HDL* $49. D-T* E-T* $2. $2. D-HDL* $. E-HDL* $6.2 SWING U TO 4 2" : D $,2. C D E H R 4 " 2 /6 : M $9. SWING U TO 4" : E $,662. C D E H R 6 MKE OF LTHE SWING C D E LLS X-LL* X-LL* CX-LL* C-LL* D-LL* E-LL* RICE E. $.9 $4. $4.6 $4.9 $. $6.6 FLNGE NUTS X-FN* X-FN* CX-FN* C-FN* RICE E. $.2 $4.4 $. $. D-FN* $2.6 E-FN* $2.9 SWING 2" HVY DUTY & LRGER LTHES age

4 QUICK CHNGE SHNK TOOL HOLDERS TECHNICL DT: CCITIES MODELS # TURNING ND FCING HOLDER Takes various sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations. X SERIES X- RICE E. $. C D Tool it X SERIES CX SERIES C SERIES D SERIES E SERIES X- RICE E. $6. C D Tool it CX- RICE E. $. C D Tool it C- RICE E. $. C D Tool it D- RICE E. $. C D Tool it E- RICE E. $24. C D Tool it /6 /6 /6 /6 2 /6 " 2 " 2 /6 " 2 /6 4" #S OVERSIZE TURNING ND FCING HOLDER Takes large sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations. dimension is oversize which allows larger tools to be used. X-S RICE E. $. C D Tool it " /6 max X-S RICE E. $9. C D Tool it /6 max CX-S RICE E. $2. C D Tool it 9 /6 " 2 " max C-S RICE E. $. C D Tool it 2" 2 max D-S RICE E. $24. C D Tool it 2 /6 " max #2 ORING, TURNING ND FCING HOLDER V groove holds round shank boring bars and tools as well as square tool bits. X-2 RICE E. $6. X-2 RICE E. $. CX-2 RICE E. $94. C-2 RICE E. $6. D-2 RICE E. $66. E-2 RICE E. $2. C D Tool it Shank C D Tool it Shank C D Tool it Shank C D Tool it Shank C D Tool it Shank C D Tool it Shank /6 /6 /6 /6 /6 2 /6 " 2 " /6 2 /6 " " 2 /6 4" #2S OVERSIZE ORING, TURNING ND FCING HOLDER V groove holds round shank boring bars and tools as well as square tool bits. dimension is oversize which allows larger tools to be used. X-2S RICE E. $9. C D Tool it Shank " /6 max X-2S RICE E. $. C D Tool it Shank /6 max CX-2S RICE E. $. C D Tool it Shank 9 /6 " 2 " max C-2S RICE E. $6. C D Tool it Shank 2" 2 max " D-2S RICE E. $249. C D Tool it Shank 2 /6 " max #6 MULTILE TOOL HOLDER Versatile, ideal for repetitive work: for gang set-ups or form tool. X-6 RICE E. $99. X-6 RICE E. $6. CX-6 RICE E. $. C-6 RICE E. $. D-6 RICE E. $22. E-6 RICE E. $4. C D Tool it C D Tool it C D Tool it C D Tool it C D Tool it C D Tool it " 9 /6 /6 9 /6 /6 /6 2 9 /6 2 2 " 2 " 2 2 4" #9 MULTI-UROSE HOLDER Ideal for multiple operations. Left or right turning and facing, working close to tail stock, form tool gang set-ups, etc. Extremely useful for short heavy duty boring or CNC gang tooling. X-9 RICE E. SECIL ORDER C D E F Tool it X-9 RICE E. SECIL ORDER C D E F Tool it CX-9 RICE E. SECIL ORDER C D E F Tool it C-9 RICE E. SECIL ORDER C D E F Tool it D-9 RICE E. SECIL ORDER C D E F Tool it /6 " 2 /6 2 /6 /6 2 /6 2" " 2 2" " " 4" 2 4 " # #L EXTENSION TOOL HOLDER # & L new addition to the versatile loris dovetail mounted quick-change tool holder series. The # provides an extremely rugged extended open slot featuring maximum rigidity for deep turning or facing operation. L opposite hand. X- X-L RICE E. $99. RICE E. $6. C D E Tool it /6 /6 2 /6 X- X-L CX- CX-L C- C-L D- D-L E- E-L RICE E. $2. RICE E. $. RICE E. $2. RICE E. $. RICE E. $49. RICE E. $6. RICE E. $24. RICE E. $24. RICE E. $69. RICE E. $. C D E Tool it 2 C D E Tool it /6 2 C D E Tool it /6 " 2 " C D E Tool it 2 " " C D E Tool it 2 /6 4" 6 HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* RICE E. $2.6 CX-H* RICE E. $.2 C-H* RICE E. $.6 D-H* RICE E. $9.2 E-H* RICE E. $22. TOOL HOLDER SET SCREWS (SET OF 4) X-SS* RICE $6.6 SET X-SS* RICE $6.6 SET CX-SS* RICE $6.6 SET C-SS* RICE $. SET D-SS* RICE $. SET E-SS* RICE $2. SET age 4 age

5 QUICK CHNGE ORING R TOOL HOLDERS TECHNICL DT: CCITIES MODELS X SERIES X SERIES CX SERIES C SERIES D SERIES E SERIES #4, #4 HEVY DUTY ORING R HOLDER Equipped with a split bushing to accommodate a boring bar of smaller diameter. It grips bar with extreme rigidity, cuts smoothly without chatter. X-4 RICE E. $2. D D X-4 RICE E. $. X-4 CX-4 C-4 D-4 E-4 RICE E. $6. RICE E. $6. RICE E. $9. RICE E. $29. RICE E. $4. D D D D D D D D D D " 2" " " 2" " 2 " " X-4 CX-4 C-4 D-4 RICE E. $4. RICE E. $. RICE E. $29. RICE E. $2. D D D D D D D D D D " " 2" " 2 " 2 2" INS (New Style) For Holders #4* #4* (Set of 2) X-INS* RICE $29. SET X-INS* CX-INS* C-INS* D-INS* E-INS* RICE $.6 SET RICE $.6 SET RICE $2. SET RICE $24. SET RICE $26. SET JM SCREWS For Holders #4* #4* (Set of 2) X-JS* RICE $6. SET X-JS* CX-JS* C-JS* D-JS* E-JS* RICE $6. SET RICE $6. SET RICE $.6 SET RICE $24. SET RICE $24. SET #4D, #4D ORING R HOLDER recision ground bore and split clamping design to accommodate excellent clamping pressure and the ability to adjust positive to negative cutting angle on boring bar. ushings sold separately, see below. X-4D RICE E. $. D X-4D RICE E. $. X-4D CX-4D C-4D D-4D E-4D RICE E. $. RICE E. $24. RICE E. $2. RICE E. $22. RICE E. $. D D D D D " 2" " " 2" " X-4D CX-4D C-4D D-4D RICE E. $22. RICE E. $. RICE E. $6. RICE E. $22. D D D D D " " 2" 2 2 2" #, #4 & #4 ORING R HOLDER Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. Capacities listed in chart. ushings sold separately, see below. X- RICE E. $9. D X-4 RICE E. $9. X- CX- C- D- E- RICE E. $9. RICE E. $2. RICE E. $4. RICE E. $9. RICE E. $44. D D D D D " 2" " 2" 2 " 2 2" X-4 CX-4 C-4 D-4 E-4 RICE E. $. RICE E. $. RICE E. $6. RICE E. $9. RICE E. $49. D D D D D D " 2" " " 2 " 2 " 2" 4" 2 X-4 RICE E. $4. X-4 CX-4 C-4 D-4 E-4 RICE E. $. RICE E. $. RICE E. $. RICE E. $229. RICE E. $2. D D D D D D " " 2" 2 2 2" 2 4 " #42 ORING R HOLDER flick of the tool post handle locks both holder and boring bar. recise alignment of boring bar is preset by means of a stop ring which is adjustable for both boring depth and cutting angle. NOT FOR ISTON TYE TOOL OST STO RINGS X-42 RICE E. SECIL ORDER C D " SR- ( I.D.)* RICE E. $26. X- 42 CX-42 C-42 RICE E. SECIL ORDER RICE E. SECIL ORDER RICE E. SECIL ORDER C D C D C D " " 2" " 4 2 " SR- ( I.D.)* SR-2 (" I.D.)* SR-2 (" I.D.)* RICE E. $26. RICE E. $2. RICE E. $2. HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* CX-H* C-H* D-H* E-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. $22. USHINGS/STNDRD X-STD* RICE E. $. X-STD* CX-STD* C-STD* D-STD* E-STD* RICE E. $. RICE E. $4. RICE E. $44. RICE E. $6. RICE E. $92. USHINGS/SECIL (Non-returnable/cancelable item) X-SL* RICE E. $6. X-SL* CX-SL* C-SL* D-SL* E-SL* RICE E. $6. RICE E. $6. RICE E. $9. RICE E. $4. RICE E. $9. REDUCER USHINGS FOR ORING R TOOL HOLDERS Designed to accommodate cutting tools of smaller shank diameters, such as drills, endmills, and small boring bars. ORDERING INFORMTION SIZES R-* R-2* R-4* R-42* R-* RICE E. O.D. D D /6 " " /6 Larger holders available for C, D Series on page 2. LORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY VENUE.O. OX 29 CLIFTON, NJ -29 TEL : FX: TOLL FREE:.2. E-MIL: aloris@aloris.com WESITE: The originator of quick change tooling R-2* 9. /6 age 6 age

6 QUICK CHNGE DRILLING HOLDERS TECHNICL DT: CCITIES MODELS X SERIES X SERIES CX SERIES C SERIES D SERIES E SERIES # DOVETIL CHUCK HOLDER The uniquely designed dovetail chuck holder permits quick and accurate mounting of drills, reamers, taps, boring bars, etc., and feed by means of your lathe s carriage power drive it eliminates tailstock mounting and tailstock drive. The loris chuck holder offers all of the quick-change, repeat positioning accuracy and high-rigidity features found in all loris precision dovetail holders. The chuck is mounted in a recessed position for minimum overhang, permitting use of the entire usable length of the tool. vailable in capacities up to -in. Dovetail holder supplied complete with chuck and key. X- RICE E. $24. CHUCK CCITY 2 X- CX- C- D- RICE E. $26. RICE E. $24. RICE E. $9. RICE E. $6. CHUCK CCITY CHUCK CCITY CHUCK CCITY CHUCK CCITY /6 2 9 /6 /6 2 /6 /6 #C C COLLET HOLDER Can be used with a variety of shank tools: drills, reamers, C. bores, taps, end mills, boring bars and other tools. Collet not included. X-C RICE E. $6. COLLET SIZE /6 C X-C CX-C C-C D-C RICE E. $. RICE E. $92. RICE E. $2. RICE E. $. COLLET SIZE COLLET SIZE COLLET SIZE COLLET SIZE /6 C 2" " C 2 C " C #, #, #4, # MORSE TER HOLDER Drills with carriage by using power feed instead of tail stock. Easily centered. X- RICE E. $94. TER HOLE SIZE X- CX- C- D- E- RICE E. $99. RICE E. $24. RICE E. $4. RICE E. $24. RICE E. $2. TER HOLE SIZE TER HOLE SIZE TER HOLE SIZE TER HOLE SIZE TER HOLE SIZE #2 M.T. #2 M.T. " 2" # M.T. 2 # M.T. 9 /6 #4 M.T. # M.T. X- RICE E. $. X- CX-4 C-4 D- RICE E. $. RICE E. $4. RICE E. $6. RICE E. $22. TER HOLE SIZE TER HOLE SIZE TER HOLE SIZE TER HOLE SIZE TER HOLE SIZE # M.T. # M.T. /6 2 #4 M.T. 2 #4 M.T. # M.T. #2 DRILLING & ORING HOLDER Combines drilling and boring operations in a single unit. Used with the loris super precision tool post, the holder is simply switched in seconds from one dovetail to the other. Repeat positioning accuracy of. inch is assured at all setting and adjustment points. standard Morse Taper accommodates a wide range of drill diameters, permitting drilling by carriage and power feed instead of tailstock. The boring bar, reamer, tap or other straight shank tool can be quickly released and removed from the holder. X-2 RICE E. SECIL ORDER D TER HOLE SIZE # M.T. X-2 CX-2 C-2 RICE E. SECIL ORDER RICE E. SECIL ORDER RICE E. SECIL ORDER D TER HOLE SIZE D TER HOLE SIZE D TER HOLE SIZE # M.T. " 2" " # M.T. 2 " #4 M.T. HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* CX-H* C-H* D-H* E-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. $22. #44 REECH-LODING TER SOCKETS ND HOLDERS offers all of the advantages of the well known series 42 quick-change super-precision boring bar holder; with the addition of a gravity latch which allows the holder to accept the new breech-loading MS Morse taper sockets shown below. The latch provides positioning accuracy, prevents turning of the taper socket, and assures rigidity. The breech or back-end loading feature of the MS Morse taper socket, reduces tool changeover time because the cross-slide remains fixed, eliminating re-centering. The latch does not interfere with the holder s ability to accept loris series boring bars, with or without keyed lock stop rings, or any round shank tools. flick of the loris tool post handle locks both the holder and taper socket (or boring bar) in working position in one fast operation. recise height adjustment is set and locked by means of a knurled stop and lock-nut on the holder, and positive repeat positioning accuracy to within. inches is assured. reech-loading taper sockets and holders shown on page 9. NOT FOR ISTON TYE TOOL OST SECIL CX-44 SECIL C-44 C D C D series 44 holders REECH-LODING TER SOCKETS ND HOLDERS designed to accept drills, reamers, taps, etc. with Morse taper shanks. ermits rapid interchanging of the two tools without disengaging the tapers, and without moving the cross-slide. The socket is notched at one-inch intervals so that machining depth can be repeated accurately from piece to piece. The gravity latch on the series 44 engages with the selected bar notch to assure accurate positioning and to prevent the bar from turning. ORDER # O.D. MORSE TER MS-2 " #2 RICE ECH SECIL ORDER series MS breech-loading Morse taper sockets " 2" " 4 2 " age age 9

7 UNIVERSL TOOL HOLDERS #2, #, #22 FOR RIGHT OR LEFT HND TURNING, FCING, CHMFERING ND ORING (#22) unique design for models #2 & # holders provides for many angular turning, contouring and chamfering operations. The cartridge has 2 indexing positions at intervals. See illustration below. The model #22 with its two dovetail design leads to a wide range of applications by permitting front and rear turning, contouring, boring and facing operations. ll holders assure proper cutting edge and clearance angles at all indexing points. Two-way adjustable rake for right or left hand turning with cutting angle positive stop. #2 # Two-way adjustable rake for right or left hand turning with cutting angle positive stop. #22 UNIVERSL TOOL HOLDER #2 Holder supplied as shown less insert. ORDERING INFORMTION FOR #2, #, #22 CRTRIDGES CRDLE LOCK SCREW X SERIES X SERIES CX SERIES C SERIES X-2 X-2 CX-2 C-2 RICE E. $9. RICE E. $2. RICE E. $226. RICE E. $262. DIM. = DIM. = DIM. = 2" DIM. = 2 E DIM. = E DIM. = /6 E DIM. = E DIM. = RELCEMENT RTS CRT-2* CRT-2* CRT-2* CRT-2* RICE E. $6. RICE E. $6. RICE E. $6. RICE E. $6. CC-2* CC-2* CC-2* CC-2* RICE E. $6. RICE E. $6. RICE E. $6. RICE E. $6. LS-2* LS-2* LS-2* LS-2* RICE E. $4. RICE E. $4. RICE E. $4. RICE E. $4. D SERIES E SERIES Cartridge cradle Tool Steel Cartridge adjusts every for right or left hand turning, facing or chamfering. 2 positive lock positions. Exclusive positive lock with 2-way force holding insert down and tight against shoulder. Standard triangular carbide insert has 6 cutting edges. ILLUSTRTIONS SHOW WHT ONE SINGLE TOOL CN CCOMLISH Cartridge cradle UNIVERSL TOOL HOLDER # HEX LOCKING IN HEIGHT DJUSTMENT SSEMLY CRTRIDGES LOCK SCREW HEX LOCKING IN L-2* L-2* L-2* L-2* RICE E. $2. RICE E. $2. RICE E. $2. RICE E. $2. X-H* X-H* CX-H* C-H* RICE E. $2.6 RICE E. $2.6 RICE E. $.2 RICE E. $.6 RELCEMENT RTS C- D- E- RICE E. $24. RICE E. $. RICE E. $429. DIM. = 2 DIM. = 2 DIM. = E DIM. = E DIM. = /6 E DIM. = 2 /6 CRT-* CRT-* CRT-4* RICE E. $. RICE E. $. RICE E. $. LS-* LS-* LS-4* RICE E. $6. RICE E. $6. RICE E. $9. L-* L-* L-4* RICE E. $4. RICE E. $4. RICE E. $. ICTORIL DIGRM OF CRTRIDGE CRTRIDGE has 2 indexing positions at intervals. This means many angular turning and chamfering jobs can be done faster and easier. HEIGHT DJUSTMENT SSEMLY UNIVERSL TURNING & ORING HOLDER #22 C-H* D-H* E-H* RICE E. $.6 RICE E. $9.2 RICE E. $22. X-22 X-22 CX-22 C-22 D-22 E-22 RICE E. $24. RICE E. $2. RICE E. $2. RICE E. $29. RICE E. $9. RICE E. $4. Standard triangular carbide insert has 6 cutting edges. CRTRIDGE CRT-2, CRT-, CRT-4 UNITS Can be easily adapted on bars, other special tools, to meet any customer s specifications. Cartridges can be supplied separately or combined with cartridge cradle. CRTRIDGE RICE E. C D INSERT SIZE I.C. THICK CRTRIDGES CRDLE DIM. = DIM. = DIM. = 2 DIM. = 2 DIM. = 2 DIM. = E DIM. = E DIM. = /6 E DIM. = E DIM. = E DIM. = 2 E DIM. = 2 MIN ORE DIM. = 2 MIN ORE DIM. = 2 MIN ORE DIM. = MIN ORE DIM. = MIN ORE DIM. = 4 MIN ORE DIM. = MX ORE LENGTH=2 MX ORE LENGTH=2 MX ORE LENGTH=2 MX ORE LENGTH=2 MX ORE LENGTH= MX ORE LENGTH=4 RELCEMENT RTS CRT-2* CRT-2* CRT-2* CRT-* CRT-* CRT-4* RICE E. $6. RICE E. $6. RICE E. $6. RICE E. $. RICE E. $. RICE E. $94. CC-2* CC-2* CC-2* CC-* CC-* RICE E. $6. RICE E. $6. RICE E. $6. RICE E. $. RICE E. $. Exclusive positive lock with 2-way force holding insert down and tight against shoulder. Tool Steel Cartridge adjuster every for right or left hand turning facing or chamfering. 2 positive lock positions. CRT-2* $6. CRT-* $. CRT-4* $94. " " 9 /6 /6 /6 2 /6 /6 /6 /6 Choose from carbide style TNMS, TNM, or TNMG. See page. Cartridge CRT- and CRT-4 are interchangeable. LOCK SCREW HEX LOCKING IN HEIGHT DJUSTMENT SSEMLY LS-2* LS-2* LS-2* LS-* LS-* LS-4* RICE E. $4. RICE E. $4. RICE E. $.2 RICE E. $6. RICE E. $6. RICE E. $9. L-2* L-2* L-2* L-* L-* L-4* RICE E. $2. RICE E. $2. RICE E. $2. RICE E. $4. RICE E. $4. RICE E. $. X-H* X-H* CX-H* C-H* D-H* E-H* RICE E. $2.6 RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. $22. age age

8 QUICK CHNGE CRIDE INSERT CUTTING TOOLS WITH DJUSTLE CHIREKER TECHNICL DT: CCITIES MODELS #2 X SERIES X-2 RICE E. $42. X SERIES CX SERIES C SERIES D SERIES E SERIES X-2 CX-2 C-2 D-2 E-2 RICE E. $. RICE E. $6. RICE E. $. RICE E. $24. RICE E. $. I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE OS. " OS. /6 2" OS. 2 /6 OS. 2 /6 OS. 2 /6 /6 OS. RELCEMENT DJUSTLE CRIDE CHIREKER -R* RICE E. $2. -R* -R* 2-R* 2-R* 2-R* RICE E. $2. RICE E. $2. RICE E. $2. RICE E. $2. RICE E. $2. RELCEMENT CRIDE SHIM SM-4* RICE E. $.4 SM-4* SM-4* SM-* SM-* SM-* RICE E. $.4 RICE E. $.4 RICE E. $. RICE E. $. RICE E. $. TG-22* I.C. T R TG-22 RICE TG-22 TG-22 TG-42 TG-42 TG-42 RICE RICE RICE RICE RICE TURNING HOLDER FOR CRIDE S ccommodates standard triangular carbide insert positive rake. Furnished with fully adjustable carbide chipbreaker and carbide shim to protect the holder. CLM SCREW FOR CHIREKER SHIM CLM SCREW (SET OF ) TG-42* /6 See full selection of inserts Inserts are priced individually however, on pages they must be purchased in packages of. 2/ SCR-2* RICE E. $. SM-4SS* RICE $9.9 Set 2/6 6. 2/6 6. 2/6 9. 2/6 9. 2/ SCR-2* : SCR-2* : SCR-2* : SCR-2* : SCR-2* RICE E. $. RICE E. $. RICE E. $. RICE E. $. RICE E. $. SM-4SS* SM-4SS* SM-SS* SM-SS* SM-SS* RICE $9.9 Set RICE $9.9 Set RICE $. Set RICE $. Set RICE $. Set HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* CX-H* C-H* D-H* E-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. $22. #2N X-2N RICE E. $42. X-2N CX-2N C-2N D-2N E-2N RICE E. $. RICE E. $6. RICE E. $. RICE E. $24. RICE E. $. I.C. THICK RKE NEG. I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE " NEG. /6 2" NEG. 2 /6 NEG. 2 /6 NEG. 2 /6 I.C. THICK RKE NEG. RELCEMENT DJUSTLE CRIDE CHIREKER -R* RICE E. $2. -R* -R* 2-R* 2-R* -R* RICE E. $2. RICE E. $2. RICE E. $2. RICE E. $2. RICE E. $4. RELCEMENT CRIDE SHIM SM-42* RICE E. $.4 SM-42* SM-42* SM-26* SM-26* SM-2* RICE E. $.4 RICE E. $.4 RICE E. $9.2 RICE E. $9.2 RICE E. $6.9 I.C. T R TNG-2 TNG-2 TNG-2 TNG-42 TNG-42 TNG-44 TURNING HOLDER FOR CRIDE S ccommodates standard triangular carbide insert negative rake. Furnished with fully adjustable carbide chipbreaker and carbide shim to protect the holder. Inserts are priced individually however, they must be purchased in packages of. CLM SCREW FOR CHIREKER SHIM CLM SCREW (SET OF ) TNG-2* TNG-42* TNG-44* /6 /6 See full selection of inserts on pages RICE 2/ SCR-2* RICE E. $. SM-42SS* RICE $9.9 Set RICE RICE RICE RICE RICE 2/6 6. 2/6 6. 2/ / / SCR-2* : SCR-2* : SCR-2* : SCR-2* : SCR-2* RICE E. $. RICE E. $. RICE E. $. RICE E. $. RICE E. $. SM-42SS* SM-42SS* SM-26SS* SM-26SS* SM-2SS* RICE $9.9 Set RICE $9.9 Set RICE $. Set RICE $. Set RICE $2.9 Set HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* CX-H* C-H* D-H* E-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. $22. Sold in package of pcs. & up call for price. Sold in package of pcs. & up call for price. age 2 See full selection of inserts on pages See full selection of inserts on pages age

9 QUICK CHNGE COMINTION CRIDE INSERT CUTTING TOOLS WITH DJUSTLE CHIREKER TECHNICL DT: CCITIES MODELS #6 X SERIES X-6 RICE E. $94. X SERIES CX SERIES C SERIES D SERIES E SERIES X-6 CX-6 C-6 D-6 E-6 RICE E. $24. RICE E. $24. RICE E. $26. RICE E. $. RICE E. $44. I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE OS. " OS. /6 2" OS. 2 /6 OS. 2 /6 OS. 2 /6 /6 OS. RELCEMENT DJUSTLE CRIDE CHIREKER -R* RICE $2. ea. -L* RICE $2. ea. -R* RICE $2. ea. -R* RICE $2. ea. 2-R* RICE $2. ea. 2-R* RICE $2. ea. 2-R* RICE $2. ea. -L* RICE $2. ea. -L* RICE $2. ea. 2-L* RICE $2. ea. 2-L* RICE $2. ea. 2-L* RICE $2. ea. RELCEMENT CRIDE SHIM USED UNDER CRIDE INSERT SM-4* RICE E. $.4 SM-4* SM-4* SM-* SM-* SM-* RICE E. $.4 RICE E. $.4 RICE E. $. RICE E. $. RICE E. $9.2 COMINTION TURNING ND FCING HOLDER FOR CRIDE S ccommodates standard triangular positive rake carbide inserts. Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder. TG-22* TG-42* UTTON HED CHIREKER/CLM SCREW 2 REQ D/HOLDER I.C. T R /6 See full selection of inserts Inserts are priced individually however, on pages they must be purchased in packages of. TG-22 RICE 2/ SCR-2* RICE E. $. TG-22 TG-22 TG-42 TG-42 TG-42 RICE RICE RICE RICE RICE 2/6 6. 2/6 6. 2/6 9. 2/6 9. 2/ SCR-2* : SCR-2* : SCR-2* : SCR-2* : SCR-2* RICE E. $. RICE E. $. RICE E. $. RICE E. $. RICE E. $. SHIM CLM SCREW (SET OF ) SM-4SS* RICE $9.9 Set SM-4SS* SM-4SS* SM-SS* SM-SS* SM-SS* RICE $9.9 Set RICE $9.9 Set RICE $. Set RICE $. Set RICE $. Set HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* CX-H* C-H* D-H* E-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. $22. #6N X-6N RICE E. $99. X-6N CX-6N C-6N D-6N E-6N RICE E. $22. RICE E. $2. RICE E. $29. RICE E. $9. RICE E. $49. I.C. THICK RKE NEG. I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE " NEG. /6 2" NEG. 2 /6 NEG. 2 /6 NEG. 2 /6 I.C. THICK RKE NEG. RELCEMENT DJUSTLE CRIDE CHIREKER -R* RICE $2. ea. -L* RICE $2. ea. -R* RICE $2. ea. -R* RICE $2. ea. 2-R* RICE $2. ea. 2-R* RICE $2. ea. -R* RICE $4. ea. -L* RICE $2. ea. -L* RICE $2. ea. 2-L* RICE $2. ea. 2-L* RICE $2. ea. -L* RICE $4. ea. RELCEMENT CRIDE SHIM USED UNDER CRIDE INSERT SM-42* RICE E. $.4 SM-42* SM-42* SM-26* SM-26* SM-2* RICE E. $.4 RICE E. $.4 RICE E. $9.2 RICE E. $9.2 RICE E. $6.9 I.C. T R TNG-2 TNG-2 TNG-2 TNG-42 TNG-42 TNG-44 COMINTION TURNING ND FCING HOLDER FOR CRIDE S ccommodates standard triangular negative rake carbide inserts. Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder. Inserts are priced individually however, they must be purchased in packages of. TNG-2* TNG-42* TNG-44* UTTON HED CHIREKER/CLM SCREW /6 /6 See full selection of inserts on pages RICE 2/ SCR-2* RICE E. $. RICE RICE RICE RICE RICE 2/6 6. 2/6 6. 2/ / / SCR-2* : SCR-2* : SCR-2* : SCR-2* : SCR-2* RICE E. $. RICE E. $. RICE E. $. RICE E. $. RICE E. $. SHIM CLM SCREW (SET OF ) SM-42SS* RICE $9.9 Set SM-42SS* SM-42SS* SM-26SS* SM-26SS* SM-2SS* RICE $9.9 Set RICE $9.9 Set RICE $. Set RICE $. Set RICE $2.9 Set HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* CX-H* C-H* D-H* E-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. $22. Sold in package of pcs. & up call for price. Sold in package of pcs. & up call for price. age 4 See full selection of inserts on pages See full selection of inserts on pages age

10 QUICK CHNGE CRIDE INSERT CUTTING TOOLS TECHNICL DT: CCITIES MODELS #2 X SERIES X-2 RICE E. SECIL ORDER X SERIES CX SERIES C SERIES X-2 CX-2 C-2 RICE E. SECIL ORDER RICE E. SECIL ORDER RICE E. SECIL ORDER D SERIES E SERIES TURNING ND FCING HOLDER combination holder with quick-reversibility. osition #, with no offset and osition #2, with offset; provides smooth, chatter-free turning and facing. Holder accommodates standard triangular positive rake inserts. Supplied with fully adjustable carbide chip breakers and shims to protect the holder. RELCEMENT DJUSTLE CRIDE CHIREKER RELCEMENT CRIDE SHIM USED UNDER CRIDE INSERT UTTON HED CHIREKER/CLM SCREW SHIM CLM SCREW (SET OF ) TG-22* TG-42* Inserts are priced individually however, they must be purchased in packages of. I.C. T R /6 See full selection of inserts on pages I.C. THICK RKE OS. -R* RICE E. $2. SM-4* RICE E. $.4 TG-22 RICE 2/ SCR-2* RICE E. $. SM-4SS* RICE $9.9 Set I.C. THICK RKE I.C. THICK RKE " OS. /6 2" OS. 2 I.C. THICK RKE -R* -R* 2-R* RICE E. $2. RICE E. $2. RICE E. $2. SM-4* SM-4* SM-* RICE E. $.4 RICE E. $.4 RICE E. $. TG-22 TG-22 TG-42 RICE RICE RICE 2/6 6. 2/6 6. 2/ SCR-2* : SCR-2* : SCR-2* RICE E. $. RICE E. $. RICE E. $. SM-4SS* SM-4SS* SM-SS* RICE $9.9 Set RICE $9.9 Set RICE $. Set /6 OS. HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* CX-H* C-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 # & #L XD- XD-L RICE E. $2. RICE E. $2. XD- XD-L CXD- CXD-L CD- CD-L DD- DD-L ED- ED-L RICE E. $9. RICE E. $9. RICE E. $99. RICE E. $99. RICE E. $249. RICE E. $249. RICE E. $29. RICE E. $29. RICE E. $9. RICE E. $9. C D IC C D IC C D IC C D IC C D IC C D IC " /6 /6 /6 /6 /6 2 /6 9 / /6 2 2 L.H. SHIMS SM-* RICE E. $.9 SM-* SM-* SM-9* SM-9* SM-4* RICE E. $.9 RICE E. $.9 RICE E. $24.2 RICE E. $24.2 RICE E. $. INS L-6* RICE E. $. L-6* L-* L-6* L-6* L-2* RICE E. $. RICE E. $4.2 RICE E. $4. RICE E. $4. RICE E. $2.2 R.H. DIMOND TURNING ND FCING TOOL loris Series D and DL dovetail holders accommodate all varieties of standard diamond shaped carbide inserts positive, negative or neutral rake and either left or right lead angle. Inserts are not supplied. They are designed for use with loris quick change tool posts and allow turning and facing operations without removing the holder from the tool post. Repeat positioning accuracy within millionths is assured when used with loris tool posts. Inserts are priced individually however, they must be purchased in packages of. CLM CLM SCREW ORDER NUMER CNMG-42* CNMG-4* CNMG-64* HEIGHT DJUSTMENT SSEMLY CRIDE INSERTS I.C. H R T.2 /6.2.2 See full selection of inserts on pages CNMG-42 RICE 2/ CK-2* RICE E. $6. STC-2* RICE E. $4.9 X-H* RICE E. $2.6 CNMG-42 CNMG-42 CNMG-4 CNMG-4 CNMG-64 RICE RICE RICE RICE RICE 2/6 9. 2/6 9. 2/6.4 2/6.4 2/ CK-2* : CK-2* : CK-2* : CK-2* : CK-2* RICE E. $6. RICE E. $6. RICE E. $. RICE E. $. RICE E. $. STC-2* STC-2* STC-4* STC-4* STC-4* RICE E. $4.9 RICE E. $4.9 RICE E. $4.9 RICE E. $4.9 RICE E. $4.9 X-H* CX-H* C-H* D-H* E-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. $22. & up call for price. Sold in package of pcs. & up call for price. age 6 See full selection of inserts on pages See full selection of inserts on pages age

11 QUICK CHNGE ROFILING TOOL HOLDERS TECHNICL DT: CCITIES MODELS X SERIES X SERIES CX SERIES C SERIES D SERIES E SERIES # & #L ROFILING TOOL HOLDERS vailable with right or left hand design for front or rear turning, profiling and contouring operations. Design features include: Unique, positive locking of insert is accomplished by the two-way force exerted by locking pin and L.H. the locking screw. Insert is held down and tight against the shoulders. Clamp lock insures extra rigidity of insert and holds chip-breaker, when used, securely in place. Choice of various diamond shaped inserts provides adaptation to positive or negative rake profiling. vailable in Model # (right hand) or #L (left hand), dovetail mounting design assures maximum repeating accuracy when used with standard loris Tool ost. Holder supplied with shim and clamp. HEX LOCKING INS CLMS CLM SCREW CRIDE SHIMS (SETS) X- X-L RICE E. $26. RICE E. $26. " ROFILING INSERT I.C. THICK RKE /6 OS. or NEG. L-6* RICE E. $4. CK-2* RICE E. $. STC-4* RICE E. $4.9 SM-* RICE E. $. X- X-L CX- CX-L C- C-L D- D-L RICE E. $299. RICE E. $299. RICE E. $9. RICE E. $9. RICE E. $49. RICE E. $49. RICE E. $4. RICE E. $4. ROFILING INSERT ROFILING INSERT ROFILING INSERT I.C. THICK RKE I.C. THICK RKE I.C. THICK RKE " 2" 2 2 /6 OS. or NEG. /6 OS. or NEG. /6 OS. or NEG. ROFILING INSERT I.C. THICK RKE /6 OS. or NEG. L-6* L-6* L-6* L-6* RICE E. $4. RICE E. $4. RICE E. $4. RICE E. $4. CK-2* CK-2* CK-2* CK-2* RICE E. $. RICE E. $. RICE E. $. RICE E. $. STC-4* STC-4* STC-4* STC-4* RICE E. $4.9 RICE E. $4.9 RICE E. $4.9 RICE E. $4.9 SM-* SM-* SM-* SM-* RICE E. $. RICE E. $. RICE E. $. RICE E. $. HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* CX-H* C-H* D-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 R.H. Carbide inserts listed at bottom of this page, and full selection on pages QUICK CHNGE KNURLING TOOL HOLDERS TECHNICL DT: CCITIES MODELS X SERIES X SERIES CX SERIES C SERIES D SERIES E SERIES # KNURLING, FCING ND TURNING HOLDER For turning and facing as well as knurling. Supplied with a set of high speed precision ground and lapped medium diamond knurls. Easily replaceable. Holder supplied with 2 knurls. HEIGHT DJUSTMENT SSEMLY X- RICE E. $2. C E E TOOL IT 2 9 /6 /6 X-H* RICE E. $2.6 X- RICE E. $49. C E E TOOL IT " 2 X-H* RICE E. $2.6 CX- RICE E. $69. C E E TOOL IT /6 2" CX-H* RICE E. $.2 C- RICE E. $4. C E E TOOL IT /6 2 " C-H* RICE E. $.6 " D- RICE E. $26. C E E TOOL IT 4 " D-H* RICE E. $9.2 #9 DJUSTLE KNURLING HOLDER excellent knurling, with approach adjustability, is provided with the newly designed #9 knurling holder. The #9 is selfcentering and is adjusted by means of a threaded spindle with left and right hand threads, providing the ideal near-vertical-axis approach angle for a wide range of stock diameters. Spindle and cross-slide pressure are minimal, thus knurling of thin wall tubing is easily performed. The loris #9, which is designed for use in any standard turret tool post or other open-slot holder, is also availalbe HEIGHT DJUSTMENT SSEMLY with dovetail mounting (series 9) to fit loris tool posts. recision ground, " O.D. x " wide, high-speed medium diamond knurls are supplied unless otherwise specified. CRIDE ROFILING INSERTS FOR & L ROFILE TOOLS STYLE DNG NEGTIVE RKE STYLE DNMZ " OSITIVE I.C. T R /6 INSERT 2/6 6 DNG-2* $6. $2.4 X-9 RICE E. $2. KNURL SIZE 2" x x X-H* RICE E. $2.6 X-9 RICE E. $4. KNURL SIZE 2" x x X-H* RICE E. $2.6 HIGH SEED KNURLS For # & #9 Holders: D-Diamond/S-Straight/NEW Convex Hi-Cobalt (CD-Spiral & CS-Straight) CX-9 RICE E. $6. KNURL SIZE 2" x x CX-H* RICE E. $.2 C-9 RICE E. $9. KNURL SIZE 2" x x C-H* RICE E. $.6 RELCEMENT KNURLS KNURL D-9 RICE E. $4. KNURL SIZE 2" x x D-H* RICE E. $9.2 D6R/D6L/S6* CD6R/CD6L/CS6* CORSE D2R/D2L/S2/D2R* D2L/S2/CD2R/CD2L* CS2/CD2R/CD2L/CS2* MEDIUM DR/DL/S* CDR/CDL/CS* FINE STYLE DNMG NEGTIVE STYLE DNMS " OSITIVE /6 DNMG-2* DNMS-2 $.6 $26. RICE E. $6. D & S $. CD & CS (NEW) TiN COTED DNMZ-42* DNMS-42 $2.4 $2. KNURL-LOCK SCREW SCR-* Used with any # and 9 holder Inserts are priced individually, however, they must be purchased in packages of. RICE E. $. age See full selection of inserts on pages age 9

12 QUICK CHNGE THREDING HOLDERS, LDES & INSERTS TECHNICL DT: CCITIES MODELS # THREDING HOLDER # This universal threading holder comes with an interchangeable high speed threading blade which has two cutting edges. You may now reverse your spindle and cut a thread without fear of hitting shoulders. Speeds your threading. lso available with carbide insert blade. Holders supplied with blade as follows: X-, X-CX-6, C-D-E-4, or up to request. HEIGHT DJUSTMENT SSEMLY X SERIES X- RICE E. $24. USED WITH /6 NY THREDING LDE SHOWN ELOW X-H* RICE E. $2.6 X SERIES CX SERIES C SERIES D SERIES NY THREDING LDE NY THREDING LDE NY THREDING LDE NY THREDING LDE " SHOWN ELOW 2" SHOWN ELOW 2 SHOWN ELOW 2 SHOWN ELOW E SERIES X- CX- C- D- E- RICE E. $. RICE E. $. RICE E. $. RICE E. $2. RICE E. $9. USED WITH USED WITH USED WITH USED WITH USED WITH NY THREDING LDE SHOWN ELOW X-H* CX-H* C-H* D-H* E-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. $22. # THREDING ND GROOVING TOOL HOLDER # Holder provides accurate threading and grooving. It is equipped with a threading insert holder (loris T6) at the front and an open slot for a grooving tool at the rear. Cutting tools are not included. lso available with highspeed blade. Holder supplied with T6 insert holder less threading insert. lso available with high-speed blade. HEIGHT DJUSTMENT SSEMLY X- RICE E. $24. USED WITH NY THREDING LDE SHOWN ELOW X-H* RICE E. $2.6 /6 X- CX- C- D- RICE E. $226. RICE E. $24. RICE E. $2. RICE E. $24. USED WITH USED WITH USED WITH USED WITH " NY THREDING LDE SHOWN ELOW 2" NY THREDING LDE SHOWN ELOW 2 NY THREDING LDE SHOWN ELOW 2 NY THREDING LDE SHOWN ELOW X-H* CX-H* C-H* D-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 # DJUSTLE THREDING HOLDERS WITH H.S. LDE & T HED The new loris Series djustable Threading Holder for right and left-hand threading is designed for use with the new loris TH, TV or T2V dual insert threading holders with two carbide cutting tips. In addition, the # Series holder will accommodate standard loris T6 threading insert holders as well as standard high speed steel (HSS) loris Series or C Series. The key characteristics of the Series holder is its adjustability feature which allows easy setting of the thread helix angle to the left or right by means of two set screws, a direct-reading scale and a builtin locking feature. HEIGHT DJUSTMENT SSEMLY X- RICE E. $29. C D USED WITH 2 NY THREDING LDE SHOWN ELOW X-H* RICE E. $2.6 X- CX- C- D- RICE E. $. RICE E. $2. RICE E. $. RICE E. $4. C D USED WITH C D USED WITH C D USED WITH C D USED WITH " 2 NY THREDING LDE SHOWN ELOW 2" 2 NY THREDING LDE 2 2 NY THREDING LDE 2 2" 2 NY THREDING LDE SHOWN ELOW SHOWN ELOW SHOWN ELOW X-H* CX-H* C-H* D-H* RICE E. $2.6 RICE E. $.2 RICE E. $.6 RICE E. $9.2 RICE E. T- $. INSERT CRTRIDGES Use with any # series holder. LDES & INSERTS STND U INSERT CRTRIDGE loris Series V Threading Cartridge for two triangular 6 threading inserts CRTRIDGE T-V $9. Dim. sq. Dim. /6 C Replacement Screw # GTS-* $4. D Replacement Screw # CLM # CLM SCREW # INSERT IC /6 x shcs CK-9* $4. STC-9* $6. KEY # T-* $9. HIGH SEED THREDING LDES 6 Exclusive blade design with two cutting edges, precision ground, assures unusually long life. To resharpen, simply grind the top surface. ll blades are uniformly designed to fit any loris threading holder. RICE CCITY -4 $2. 4 or more T..I -6 $2. 6 or more T..I - $2. or more T..I C Screw T-2V $9. sq. INSERTS: EXTERNL VERTICL 6 TRINGULR THREDING INSERTS STYLE TI GTS-2* $. /6 x shcs CK-9* $4. STC-9* $6. IC L USED WITH CRTRIDGE T-2* $.4 INSERT 2/6 6 age 2 HIGH SEED THREDING LDES CME 29 Exclusive blade design with two cutting edges, precision ground, assures unusually long life. To resharpen, simply grind the top surface. ll blades are uniformly designed to fit any loris threading holder. THREDING LDE GUGE Gauge is used for quick and accurate checking of re-ground high speed parting and/or threading blades to maintain proper angle for accurate thread cutting. THREDING INSERT HOLDER ND INSERT 6 lade is reversible and has an adjustable insert for resharpening purposes. Inserts are stocked in grade 2, 6, and TiN. When ordering specify grade desired, otherwise grade 6 will be supplied. lade fits any loris threading holder. THREDING CRIDE INSERT FOR HOLDER # T-6 RICE RICE C- CCITY T..I HOLDER C-4 4 T..I G # $24. CCITY C- T..I C-6 6 T..I RICE T- 6 6 TO 4 T..I. $6. C- C- C-9 NY SIZE: $. ea. T..I T..I C- C-2 9 T..I T..I 2 T..I INSERT STYLE TI 2/6 6 6 V 6 4 T-4R* $2.4 $29.9 See full selection of inserts on pages C-4 4 T..I C-6 6 T..I D Screw LYDOWN INSERT CRTRIDGE loris Series H Threading Cartridge for two triangular 6 threading inserts C Screw D Screw V-RH T-H $6. T-2H $9. os Neg os Neg Dim. sq. sq. os T-V T-V T-2V T-2V T-2H TMC-2NV* TNMC-2NV* TMC-4NV* TNMC-4NV* INSERTS: RTIL ROFILE 6 TRINGULR THREDING INSERTS STYLE TI IC L USED WITH INSERT CRTRIDGE 6 V-RH 4 os T-H 6ER-LG6-RH* 6 V-LH 4 os T-H 6ER-LG6-LH* 22ER-LN6-RH* 6 V-LH os T-2H 22ER-LN6-LH* Sold in package of pcs. & up call for price. See full selection of inserts on pages $4. $. $2.2 $.6 Dim. C Replacement Screw D Replacement Screw S-T* $. /6 24x lg shcs /6 S-4T* $.9 /6 24x lg shcs 2/6 $. $. $. $. INSERT IC $.9 $. $2.2 $22.6 KEY # T-* $9. T-2* $.4 6 $.2 $.2 $4. $4. age 2

13 QUICK CHNGE RTING & INSERT LDE HOLDERS CUT-OFF & GROOVING HOLDERS TECHNICL DT: CCITIES MODELS # UNIVERSL RTING LDE HOLDER # and #R Holders are only for use with the loris Wedge-Lock Carbide Insert blades, T- type blades or with bevel (wedge-shape) blades having parallel top and bottom edges, as shown below. For bevel (see drawing) as well as T-type blades. Enables you to cutoff close to chuck. bsence of vibration prevents breaking blades. LORIS WEDGE-LOCK CRIDE INSERT LDES X- RICE E. $.6 C D LDE HEIGHT /6 X SERIES /6 SGIH 9-C- RICE E. $.6 X SERIES X- RICE E. $. C D LDE HEIGHT " /6 /6 /6 SGIH 26-4C- RICE E. $9.4 CX SERIES CX- RICE E. $2. C D LDE HEIGHT /6 /6 2" SGIH 26-4C-CX RICE E. $6.2 C- RICE E. $66. C D LDE HEIGHT /6 C SERIES 2 SGIH 2-4.C-C RICE E. $4. D SERIES D- RICE E. $9. C D LDE HEIGHT 2 SGIH 2-4.C-D RICE E. $4. E SERIES E- RICE E. $2. C D LDE HEIGHT " SGIH 2-4.C-E RICE E. $4. RTING LDES -2* RICE E. $22.2 -* -4C* $26. ea. $2. ea. -W* RICE E. $26. -* RICE E. $. -* RICE E. $49. -* RICE E. $49. WIDTH : HEIGHT : WIDTH : HEIGHT : /6 WIDTH : HEIGHT : /6 WIDTH : HEIGHT : WIDTH : /6 HEIGHT : WIDTH : /6 HEIGHT : WIDTH : /6 HEIGHT : WEDGE ND LOCK SCREW SSEMLY FOR HOLDERS # WS-* RICE E. $29. WS-* RICE E. $29. WS-2* RICE E. $. WS-* RICE E. $. WS-4* RICE E. $4.2 WS-* RICE E. $4.2 HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* RICE E. $2.6 CX-H* RICE E. $.2 C-H* RICE E. $.6 D-H* RICE E. $9.2 E-H* RICE E. $22. #R UNIVERSL RTING LDE TOOL HOLDER REVERSILE Has the same features as # with the advantage of rear cut-off use. X-R RICE E. $. C D LDE HEIGHT /6 /6 X-R RICE E. $. C D LDE HEIGHT /6 /6 /6 CX-R RICE E. $4. C D LDE HEIGHT " /6 2" C-R RICE E. $4. C D LDE HEIGHT /6 2 D-R RICE E. $2. C D LDE HEIGHT " 2 E-R RICE E. $2. C D LDE HEIGHT " " LORIS WEDGE-LOCK CRIDE INSERT LDES SGIH 9-C- RICE E. $.6 SGIH 26-4C- RICE E. $9.4 SGIH 26-4C-CX RICE E. $6.2 SGIH 2-4.C-C RICE E. $4. SGIH 2-4.C-D RICE E. $4. SGIH 2-4.C-E RICE E. $4. RTING LDES -2* RICE E. $22.2 -* -4C* $26. ea. $2. ea. -W* RICE E. $26. -* RICE E. $. -* RICE E. $49. -* RICE E. $49. WIDTH : HEIGHT : WIDTH : HEIGHT : /6 WIDTH : HEIGHT : /6 WIDTH : HEIGHT : WIDTH : /6 HEIGHT : WIDTH : /6 HEIGHT : WIDTH : / 6 HEIGHT : / WEDGE ND LOCK SCREW SSEMLY FOR HOLDERS # WS-* RICE E. $29. WS-* RICE E. $29. WS-2* RICE E. $. WS-* RICE E. $. WS-4* RICE E. $4.2 WS-* RICE E. $4.2 # CUT-OFF ND GROOVING HOLDER Designed for extremely high rigidity under heavy duty conditions, and cool chatterfree operation at higher speeds. Two different blades can be used with this holder: wedge-lock throwaway insert blade, or reversible blade with brazed-in carbide tips. The chip-breaker is an integral part of the blade and cannot be lifted by broken chips. Simplicity is but one of the major advantages of the Series. djustment of the blade position is simple, the locking is accomplished by one screw instead of the usual number of adjusting and clamping screws. The versatility of this tool is further increased by the availability of a wide range of cutting edge widths. Holder supplied less blade. When ordering brazed carbide blades, specify grade 2 or 6. For carbide cut-off inserts see page 4. HEIGHT DJUSTMENT SSEMLY REVERSILE LDES WITH RZED-IN CRIDE TIS WEDGE-LOCK THROWWY INSERT LDES ORDER NUMER WIDTH x HEIGHT EXTRCTOR (For self-locking carbide insert removal) WEDGE ND LOCK SCREW SSEMLY FOR HOLDERS # RICE ORDER NUMER WIDTH x HEIGHT RICE X-H* RICE E. $2.6 X- RICE E. $2. USED WITH LDE WIDTHS /6 /6, /6 or -2-* --* -2-*.2 x.. x..2 x. $. $. $. -2-SL* --SL* -2-SL*.2 x.. x..2 x. $. $. $9. ESG-* RICE E. $4.4 WS-6* RICE E. $49. X-H* RICE E. $2.6 X- RICE E. $2. USED WITH LDE WIDTHS /6 2", /6 or -2-* --* -2-*.2 x.. x..2 x. $. $. $. CX-H* RICE E. $.2 CX- RICE E. $242. USED WITH LDE WIDTHS /6 2, /6 or -2-* --* -2-*.2 x.. x..2 x. $. $. $. -2-SL* --SL* -2-SL* -2-SL* --SL* -2-SL* --2SL* -2-2SL*.2 x.. x..2 x. $. $. $9. ESG-* RICE E. $4.4 WS-* RICE E. $49..2 x.. x..2 x. $. $. $9. ESG-* RICE E. $4.4 WS-* RICE E. $4. C-H* RICE E. $.6 C- (2") C- ( / 2 ) $2. ea. $2. ea. USED WITH LDE WIDTH /6, / * -2-2*. x 2..2 x 2. $92. $2.. x 2..2 x 2. $9. $. ESG-* RICE E. $4.4 WS-9* RICE E. $.2-2-SL $46. --SL /6 $. -2-SL $.2 D-H* RICE E. $9.2 D- RICE E. $26. USED WITH LDE WIDTHS 2" /6 or --2* -2-2*. x 2..2 x 2. $92. $2. --2SL* -2-2SL*. x 2..2 x 2. $9. $. ESG-* RICE E. $4.4 WS-* RICE E. $6.2 E-H* RICE E. $22. E- RICE E. $. USED WITH LDE WIDTHS 2 /6 /6 or --2* -2-2*. x 2..2 x 2. $92. $2. --2SL* -2-2SL*. x 2..2 x 2. $9. $. ESG-* RICE E. $4.4 WS-* RICE E. $6. HEIGHT DJUSTMENT SSEMLY X-H* RICE E. $2.6 X-H* RICE E. $2.6 CX-H* RICE E. $.2 C-H* RICE E. $.6 D-H* RICE E. $9.2 E-H* RICE E. $22. age 22 Refer to age 24 for loris GT style wedge lock carbide cut-off inserts. See full selection of inserts on pages age 2

14 QUICK CHNGE CUT-OFF & GROOVING HOLDERS LDES & INSERTS TECHNICL DT: CCITIES MODELS X SERIES X SERIES CX SERIES C SERIES D SERIES E SERIES # CUT-OFF ND GROOVING HOLDER Designed for extremely high rigidity under heavy duty conditions, and cool chatter-free operation at higher speeds. Two different blades can be used with this holder: wedge-lock throwaway insert blade, or reversible blade with brazed-in carbide tips, shown. The chip breaker is an integral part of the blade and cannot be lifted by broken chips. Simplicity is but one of the major advantages of the Series. djustment of the blade position is simple, the locking is accomplished by one screw instead of the usual number of adjusting and clamping screws. The versatility of this tool is further increased by the availability of a wide range of cutting edge widths. Holder supplied less blade. lades are interchangeable with Iscar and Sandvik. WEDGE-LOCK LDES FOR CRIDE INSERTS ORDER NUMER WIDTH OF CUT x HEIGHT RICE ORDER NUMER WIDTH OF CUT x HEIGHT RICE ORDER NUMER WIDTH OF CUT x HEIGHT RICE X- RICE E. $6. USED WITH LDE WIDTHS. &.9 x. SGIH 9-2/-2S*. or.9 x. REGULR OSITIVE STO $2. $. SGIH 9-*.2 x. REGULR $2. X- RICE E. $2. USED WITH LDE WIDTHS SGIH 26-2/-2S*. or.9 x. REGULR OSITIVE STO $2. $2.9 SGIH 26-/-S*.2 x. REGULR OSITIVE STO Each Each $. $.9 SGIH 26-/-S*. x. REGULR OSITIVE STO $. $9. CX- RICE E. $2. USED WITH LDE WIDTHS SGIH 26-/-S*.2 x. REGULR OSITIVE STO $. $.9 SGIH 26-4/-4S*.6 x. REGULR OSITIVE STO Each Each $. $.9 SGIH 26-/-S*. x. REGULR OSITIVE STO $. $9. C- RICE E. $24. USED WITH LDE WIDTHS / SGIH 2-/-S*.2 x.2 REGULR OSITIVE STO $94. $. SGIH 2-/-S*. x.2 REGULR OSITIVE STO Each Each $9. $2. SGIH 2-6/-6S*.2 x.2 REGULR OSITIVE STO $9. $2. D- RICE E. $24. USED WITH LDE WIDTHS SGIH 2-/-S*.2 x.2 REGULR OSITIVE STO $94. $. SGIH 2-/-S*. x.2 REGULR OSITIVE STO Each Each $9. $2. SGIH 2-6/-6S*.2 x.2 REGULR OSITIVE STO $9. $2. WEDGE ND LOCK SCREW SSEMLY FOR HOLDERS # HEIGHT DJUSTMENT SSEMLY WS-6 RICE E. $49. X-H* RICE E. $2.6 WS- RICE E. $49. X-H* RICE E. $2.6 WS- RICE E. $4. CX-H* RICE E. $.2 WS-9 RICE E. $.2 C-H* RICE E. $.6 WS- RICE E. $6.2 D-H* RICE E. $9.2 GT STYLE LORIS Wedge-Lock CRIDE CUT-OFF INSERTS FOR WEDGE-LOCK LDES, OSITIVE RKE SHR EDGE FOR MNUL & CNC LTHES. SEE GE 4 FOR DESCRITION OF CRIDE S. Catalog Number GTN 2* GT L/R 2* GTN 2.4* GT L/R 2.4* GTN * GT L/R * GTN 4* GT L/R 4* GTN 4.* GT L/R 4.* GTN * GT L/R * GTN 6* GT L/R 6* GTN * GT L/R * GTN 9* GT L/R 9* Cutting Edge Geometry loris GT Cut-Off Insert Cutting Width Lead ngle 4 4 List rice Grade 2 or 6 Each $. $.4 $9. $9. $6.99 $.2 $. $. $. $2. $. $9. $.69 $4. $2. $2.9 $2.6 $2. List rice Grade 6 Each $.9 $.4 $.6 $.2 $.9 $.4 $9.9 $. $4.2 $4. $.6 $. $6. $6. $22. $2. $2.4 $.6 Universal Mounting loris Super-recision Single-Dovetail Heads Dovetail Head is supplied with removable handle as shown. C The rapid tool-changing versatility and accuracy synonymous with the name loris, is now available to users of lathes with turret tool posts or any open slot mounting arrangement. The head is also drilled for mounting on other types of tool carriages. The newly designed models of super-precision single-dovetail heads, accepts any of the wide range of tool holders in the same series, providing quick tool changing flexibility and repeat accuracy at the flick of a handle-one quarter turn locks holder in working position within. inches of preset position everytime. Costly time loss due to repetitive realignment is eliminated. The socket wrench handle, included in the basic head price, is removable for possible clearance requirements when used on CNC lathes. X-H RICE E. $4. C /6 Specify left or right hand. Call for price over quantity. Inserts are priced individually, however, they must be purchased in packages of. For blades see page 46. CX-H C-H $4. $9. " " /6 2 /6 D-H $64. age 24 See full selection of inserts on pages age 2

15 Miniature (M) Tool ost and Tool Holders Super precision one dovetail tool post and tool holders are especially designed for bench lathes and jewelry lathes. Three holders hold 6 different tools, are quickly interchangeable for 6 different operations. Height adjustment for each tool bit is provided on all holders. Tool holder capacity for turning or boring is to. Tool post dimensions are x x. M M- SVE % ON -IECE SETS OF TOOL OSTS ND HOLDERS Tool ost # #2 M M- M- M- M-SET % Saving RICE ECH $9. $4. $4. $2. Set is supplied with T and screw wrenches, less cutting tools. $4. M- M- # #6 SVE % OVER COMONENTS URCHSED SERTELY # #2 C SET CONSISTS OF THE FOLLOWING: Tool ost, Custom T -olt & Holders listed below SERIES X X CX C D E loris Super-recision Intro-ro Sets recision-engineered to ensure repetitive accuracy. dvanced design provides built-in quick tool changing, versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on any engine lathe, bench or CNC lathe for a wide range of operations from fine precision work to heavy duty cutting. Tool ost # TURNING ND FCING HOLDER Takes various sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations. #2 ORING, TURNING ND FCING HOLDER V groove holds round shank boring bars and tools as well as square tool bits. #4D #2 RICE/SET HOLDERS INCLUDED #-SET $46. X- X-2 X-4D X-6 X- X- #2-SET $994. X- X-2 X-4D X-6 X- X- #-SET $,29. CX- CX-2 CX-4D CX-6 CX- CX- #4-SET $,. C- C-2 C-4D C-6 C- C- #-SET $2,. D- D-2 D-4D D-6 D- D-6N rices do not include cutting tools. ictures do not represent actual sets. SVE % ON S SETS ONLY Tool ost #6-SET $,42. E- E-2 E-4D E-6 E- E-6N #6 # (lade Included) Intro-ro Set includes: Super-recision Tool ost, # Tool Holder, #2 Tool Holder SERIES X X CX C D E #2 RICE/SET # I $44. #2 I $4. # I $. #4 I $96. # I $,. #6 I $2,64. #4D # # -IECE STRTER SET SVE % OVER COMONENTS URCHSED SERTELY (lade Included) # S SET CONSISTS OF THE FOLLOWING: Tool ost, Custom T -olt & Holders listed below SERIES X X CX C D E # Tool ost C SET CONSISTS OF THE FOLLOWING: Tool ost, Custom T -olt & Holders listed below SERIES X X CX C # S #2 S # S #4 S RICE/SET $6. $9. $92. $,2. D # S $,6. E #6 S $2,64. (Knurls Included) RICE/SET HOLDERS INCLUDED # S $,. X- X-2 X-4D #2 S $,. X- X-2 X-4D # S $,69. CX- CX-2 CX-4D #4 S $2,24. C- C-2 C-4D # S $2,6. D- D-2 D-4D #6 S $,9. E- E-2 E-4D # #2 #4D # # X- X-6 X- X- X- X-6 X- X- CX-4D CX-6 CX- CX- C-4D C-4 C-6 C- D-4D D-6 D- D- E-6 E- E- E-6N #6 X- X- CX- C- D-6N E- X-6 X-6 CX-6 C-6 D- X-2 X-2 CX-2 C- rices do not include cutting tools. ictures do not represent actual sets. age 26 age 2

16 age 2 QULIFIED TOOL OSTS ND HOLDERS a full range of qualified tooling to meet the rigorous repeat accuracy demands of C.N.C. Lathe operation, combined with the advantages and convenience of quick-change versatility, high-precision and superb workmanship time and job proven qualities which have made loris products the tools preferred by lathe craftsmen for over 4 years. The loris Q System provides simplicity in set-up, programming and operation of C.N.C. lathes. The point of origin (grid line), custom located for your particular lathe, is a fixed reference for setting up all tools used in the system. The loris Q System can also be used on conventional lathes, with superior results. C-_Q Morse Taper Holder C-4Q- C-4Q- C-4Q-2 C-4Q- C-4Q- C-4Q-2 $26. $26. $24. $29. $29. $. C-4Q oring ar Holder C-Q Qualified Tool ost loris Q System Tool osts have fully qualified working surfaces. erpendiculars are accurately parallel and square to the base. For point of origin location, qualified surface data and other dimensions see below. Qualified Tool Holders loris Qualified Tool Holders are designed for use with all manually or C.N.C. Lathes. ll are available in C Q and D Q sizes. They feature parallel and square working surfaces to assure automatic resumption of the preset qualified working position every time the holder is locked into place. TECHNICL DT: MODELS CCITIES C SERIES RELCEMENT RTS RICE E. HEIGHT DJUSTMENT SET SCREW CCITY T OLT RICE E. RICE ER SET OF 4 C-Q $ " C-T* SWING $. TURNING HOLDER C-Q $ " C-H* $.6 FCING HOLDER C-LQ $ " C-H* $.6 *MORSE TER HOLDERS C-2Q C-Q C-4Q $24. $24. $24.. #2 M.T. # M.T. #4 M.T. C-H* C-H* C-H* $.6 $.6 $.6 **ORING R HOLDERS " 2" C-H* C-H* C-H* C-H* C-H* C-H* $.6 $.6 $.6 $.6 $.6 $.6 CQ-SS* CQ-SS* CQ-SS* CQ-SS* CQ-SS* CQ-SS* $. $2. $.2 $.2 $.2 $.2 D SERIES RELCEMENT RTS RICE E. HEIGHT DJUSTMENT SET SCREW CCITY T OLT RICE ER RICE E. SET OF 4 D-Q $, " SWING D-T* $2. TURNING HOLDER D-Q $ D-H* $9.2 FCING HOLDER D-LQ $ D-H* $9.2 *MORSE TER HOLDERS D-Q $29. # M.T. D-H* $9.2 D-4Q $ #4 M.T. D-H* $9.2 D-Q $29. # M.T. D-H* $9.2 D-4Q- D-4Q-2 D-4Q- D-4Q- D-4Q-2 D-4Q-2 D-4Q- $9. $9. $. $4. $6. $9. $ When ordering replacement set screws please provide dimensions. C-Q Turning Holder **ORING R HOLDERS " D-H* D-H* D-H* D-H* 2" D-H* 2 D-H* " D-H* $9.2 $9.2 $9.2 $9.2 $9.2 $9.2 $9.2 C-LQ Facing Holder DQ-SS* DQ-SS* DQ-SS* DQ-SS* DQ-SS* DQ-SS* DQ-SS* $2. $4. $4. $4. $4. $4. $4. MKE OF LTHE SWING RECOMMENDTIONS FOR ENCH, CNC ND ENGINE LTHES LORIS TOOL OST CCITY MX MX TOOL OR. IT TOOL CER 4G X 44E & G CX 4G C " 2G D 2" LH X 4 CX 46 C " D 2" MERICN 4", 6"C & 2"D C " 2"E & 2"F D 2" 2"G, 2"H, 2"I & 4"J E 2 TLS 6", " & 2" X " 4" & 6" C " 2"W, 2"D, 2"E D XELSON 2" 26 & 49 D 2" 2F E 2 ML6", MIL" CX RER MIIL", 2" & 22" CX MEUSER MIIIL24", MIV24", C or D 2" 2" & 2" C or D 2" 4" & 6" C " OYE & ", 2" & 22" D 2" EMMES 2" & 2" E 2 - X RIDGEORT 6- CX ROMI 2- C " CRROL & ", 6" & " CX JMIESON " & 2 " X CINCINNTI " & " CX HYDRSHIFT 2" C " 26" D 2" CINCINNTI " X TRY " CX LTHES CINCINNTI 4" X HEVY 6" CX DUTY " & 2" C " LTHES 22" & 24" D 2" X " CLUSING Series X 4 & " Series CX " X CLUSING " CX COLCHESTER " & 2" C " CRFTSMN 2" X " DELT " & " 4" X X " ELGIN X " ELLIOTT & 6 CX ELLIOTT & 2 C " CONCORD SUER II X EMCO ELNOMTS X MIER ELNOMTD CX GLLIC 4" & 6" X MKE OF LTHE SWING LORIS TOOL OST CCITY MX MX TOOL OR. IT TOOL 2" X GRZINO 4" CX SG 2" C " HRDINGE X " HRRISON ", 2" & " " X C " HENDEY 9" X " 2" & G X 2G, 4C, 4" & 6" CX ", 2" & 24" C " HERCULES 4 D or E 2 4" CX HERCULES " C " JX 24" D 2" IKEGI 2" C " KERRY " & " X " LNSING 6" CX LELOND DUL DRIVE " CX 6, NE-2 & 26 CX LELOND NF-26 & 22 C " HEVY NI-22 & 42 D 2" DUTY NK-42 & 2 E 2 " X LELOND " CX REGL ", 9", 2" & 24" C " LEHMNN 6", " & 2" C " RNDES 22", 2", 2" & 6" E 2 CX LODGE 6, 2, 2- C " ND & 2-2 C " SHILEY 26 & 26-2 D 2" 22, 26 & E E 2 9", ", " & 2" X " LOGN 4" X 4" CX " C " MZK -2-6 C " 24" D 2" " E 2 K2 & K X " MISL K4 & K6 X " X " (6 & 6) X K- KOMCT CX EE & 6 (6 & 6) C " 62 SERIES 6 C " MONRCH 2" (6 & 6) D 2" 62 SERIES 2 D 2" MODEL M & 62 SER. 26 D 2" MODEL N & SER. 26 D 2" SER. 22 E 2 MODEL NN 9 SER. 42 E 2 6 CX MORRI & C " SEIKI 2 D 2" MKE OF LTHE T NUT ORDERING INFORMTION SWING LORIS TOOL OST CCITY MX MX TOOL OR. IT TOOL NRDINI TT X TT2 X MS4 X MS6 X ND CX ND CX IN2 C " IN2 D SZ2 C " SZ2 D 2" M2 D 2" 2 E 2 4 E 2 NEEL, 2 & 26 CX S-26-2 & C or D 2" HX26 C or D 2" OKUM LS4"LK "LS & 2"LS CX C " REED RENTICE 4" & 6" 2" C D " 2" RIVETT 6, R & 9 2 X X " " & " X " ROCKWELL 4" X SCHERER 2" C " X SHR X CX C " SHELDON " X " " & " X & " CX or C " SHELDON SESTIN " " X CX or C " SIDNEY, 69, 2 & 2 CX 224 & 26 C " 22 D 2" 49 E 2 SIGM SN2 X SVR- CX SN46, 4 & 2 C " SN-22, 62 & -2 C or D 2" SOUTH END 9 & X ", & 4 X 6" X or CX " C " SOUTH IND " CX SRINGFIELD 4" & 6" C " ", 2", 22" & 24" D 2" " E 2 " X STNDRD 2" CX MODERN 4" & 6" CX or C " 2" " C " 2" VDF 42DSL, RO, CX 2RO & 4DSL CX M & V6 C " E6, M6 & V D 2" VOEST " & 2" CX MKE OF LTHE SWING C D E When ordering, please give name and swing of lathe or specified dimensions. lease fax the above chart with your order. Without this information T nut will be supplied blank. There is an extra charge for riser-blocks. age 29

17 LORIS INDEXLE TOOL OSTS FOR MNUL ND CNC LTHES recision Engineered to ssure Repetitive ccuracy ccuracy Within Millionths! CNC pplications Super Rigidity No Shims Required vailable with nti-rotation Key (Optional) Furnished with lank T Nut or Machined T Nut (Optional) The loris Indexable Tool ost allows 4 independent tool holders to be locked to the tool post simultaneously. This allows the operator to do multiple operations by means of indexing the tool post to any of the 24 locking positions. The index positioning and locking is accomplished by the same means as a turret on a CNC Lathe. This is the ultimate in productivity on Manual and CNC Lathes without indexing capabilities. Two standard loris Tool Holders can be mounted with no modification or you can modify some existing loris holders to fit the indexable tool post. SEE GE FOR LOCKING WRENCH RICING T LORIS INDEXLE TOOL OST OTIONS L T NUT LNK T DIM DIM L DIM OTIONL T NUT MCHINED (FILL OUT CHRT ELOW) OTIONL NTI-ROTTION KEY (CUSTOMER TO FINISH C DIMENSION IN THE CHRT ELOW) OTIONL C DIM. NTI-ROTTION KEY (LORIS TO FINISH C DIMENSION IN THE CHRT ELOW) T NUT ORDERING INFORMTION X-I-T* RICE E. $2. " 2 " 2 " X-I-TM* RICE E. $9. X-I-RS* RICE E. $2. C-I-T* RICE E. $.6 " 2 " " C-I-TM* RICE E. $2. C-I-RS* RICE E. $9. D-I-T* RICE E. $2. " " 4 " Nut and stud included. Customer to machine. Furnished with tapped hole only. Machined by loris. Ready for installation. Semi-finished. X-I-RF* RICE E. $99. C-I-RF* RICE E. $26. Finished and assembled by loris. (recision Ground.) D-I-TM* RICE E. $66. D-I-RS* RICE E. $99. D-I-RF* RICE E. $2. (lease Complete Chart and Fax) MKE OF LTHE SWING C D E Industry Standard Repeatability of. Some standard loris Tool Holders will fit if slightly modified ll components heat treated and ground 24 positions, precision indexing through heat treated precision ground face gears recision engineered to assure repetitive accuracy Full length wedge lock as featured on the traditional loris Tool ost for ultimate rigidity Optionally furnished with antirotation key precision fit to lathe compound (eliminates rotation and movement of tool post under extreme cutting conditions) The highest quality lathe tool accessories available Only sizes required for up to 6 inch swing Over forty five years of machine tool manufacturing experience Mounting wrench included with tool post Stud When ordering, please give name and swing of lathe or specified dimensions. lease fax the above chart with your order. Without this information T nut will be supplied blank. There is an extra charge for riser-blocks. C Handle all INDEXLE TOOL OST RELCEMENT RTS Not interchangeable with standard tool post parts. T OLT SSY = T -NUT ND STUD (INDEXLE) RICE E. X-I-T* $2. C-I-T* $.6 HNDLES (INDEXLE) X-I-HNDLE* RICE E. $9. C-I-HNDLE* $49.2 D-I-T* $2. D-I-HNDLE* $.2 SERIES ORDERING INFORMTION SERIES SERIES D LLS (INDEXLE) X-I-LL* RICE E. $.2 C-I-LL* $.2 D-I-LL* $.2 SWING U " X-I RICE ECH $,299. SWING " 22" C-I RICE ECH $2,9. SWING 22" 6" D-I RICE ECH $2,499. nti-rotational Key FLNGE NUTS (INDEXLE) X-I-FN* RICE E. $. C-I-FN* $6. D-I-FN* $2.6 Face Gear for Indexable Tool osts C D " 2 " 9 /6 C D 4" 9 /6 6 9 /6 C D " 4 /6 SQURE T -Nut LOCKING WRENCH X-I-LW* RICE E. $6.4 C-I-LW* $6.4 D-I-LW* $6.4 age age

18 #-I #-IX #2-I #2-IX LORIS INDEXLE TOOL HOLDERS TURNING & FCING HOLDER OVERSIZE TURNING & FCING HOLDER TURNING, FCING & ORING HOLDER OVERSIZE TURNING, FCING & ORING HOLDER X--I RICE E. $9. C Tool Cap /6 /6 C--I RICE E. $2. C Tool Cap /6 " 2 " D--I RICE E. $. C Tool Cap 2 Turning and facing accommodates a variety of turning or facing tools. Capacity listed in chart. X-2-I RICE E. $. C Sq Shank /6 X--IX RICE E. $9. C Tool Cap /6 /6 C--IX RICE E. $. C Tool Cap /6 2 C-2-I RICE E. $6. C Sq Shank /6 " 2 " /6 D--IX RICE E. $262. C Tool Cap 2 /6 Turning and facing accommodates a variety of turning or facing tools. Capacity listed in chart. Larger tool capacity. D-2-I RICE E. $9. C Sq Shank 2 " oring, turning and facing holder accommodates round shank tools in V groove as well as turning and facing tools as the # holder. Capacity listed in chart. X-2-IX RICE E. $4. C Sq Shank C-2-IX RICE E. $. C Sq Shank D-2-IX RICE E. $2. C Tool Cap recision Engineered to ssure Repetitive ccuracy ccuracy Within Millionths! CNC pplications Super Rigidity No Shims Required vailable with nti-rotation Key (Optional) Furnished with lank T Nut or Machined T Nut (Optional) See page LORIS INDEXLE STRTER SETS FOR MNUL ND CNC LTHES TENT ENDING This precision engineered tool post was designed by loris Tool Technology Co. Inc. to solve typical problems encountered by machinists. This tool post incorporates the full length loris wedge design for maximum rigidity, individual height adjustments so shims are not required, and superior indexing which allows the machinist to select any of the tools which are mounted to accomplish multiple operations without removing tools from the holder absolutely reduces set-up time and cycle time, and enhances accuracy. The basic set consists of one tool post, mounting wrench, T nut blank, and four holders: pc. #-I turning and facing; 2 pcs. #2-I facing, turning, and boring; pc. #-I cutoff. lades, inserts, and boring bars not included. loris recommends customers to order the indexable tool post with the optional nti-rotation Key which avoids movement under extreme conditions. Spare parts pricing available upon request. SERIES RICE/SET SVE % ON INDEXLE STRTER SETS X-I X-I-SET $,66. C-I C-I-SET $2,626. D-I D-I-SET $,24. #-I #4-I #-I #-I #-I #4-I #-I age 2 ORING R HOLDER ORING R HOLDER CUTOFF HOLDER (CRIDE) WEDGE & LOCK SCREW MORSE TER HOLDER /6 /6 2 /6 2 /6 oring, turning and facing holder accommodates round shank tools in V groove as well as turning and facing tools as the # holder. Capacity listed in chart. Larger tool capacity. X--I RICE E. $2. C--I RICE E. $. D--I RICE E. $222. D D D 2 " 2 Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. Capacities listed in chart. See the full line of boring bars on page X-4-I RICE E. $. C-4-I RICE E. $. D-4-I RICE E. $229. D D D " 2" " 2 Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. Capacities listed in chart. See the full line of boring bars on page X--I RICE E. $22. C--I RICE E. $2. D--I RICE E. $6. /6 2 9 /6 Cut-off & Grooving Holders Designed for extreme rigidity under heavy cutting conditions. See page for blades and inserts. WS-X--I Clamp & Screws $42. X--I RICE E. $2. Taper Hole Size # MT WS-C--I Clamp & Screws $4.2 C-4-I RICE E. $9. Taper Hole Size 2 #4 MT WS-D--I Clamp & Screws $49.2 D--I RICE E. $26. Taper Hole Size # MT Morse Taper Holder recision ground taper bore with tang locks. Morse Taper drills securely so operator can power feed drills with the carriage rather than manually with the conventional tailstock. Spare parts available upon request. Standard loris holders that can be modified by mitering the corners to prevent interference when mounting onto tool post: #, #2, #4, #4D, #, #4, #4, #, #. GT STYLE WEDGE-LOCK CRIDE CUT-OFF INSERTS FOR WEDGE-LOCK LDES, OSITIVE RKE SHR EDGE FOR MNUL & CNC LTHES. SEE GE 4 FOR DESCRITION OF CRIDE S Catalog Number Cutting Edge Geometry WEDGE-LOCK LDES FOR #-I HOLDERS X-I C-I D-I WIDTH OF CUT x HEIGHT RICE E. WIDTH OF CUT x HEIGHT RICE E. WIDTH OF CUT x HEIGHT RICE E. WIDTH OF CUT x HEIGHT RICE E. SGIH 9-2*.9 x. $2. SGIH 9-*.2 x. $2. SGIH 26-2*.9 x. $2. SGIH 26-*.2 x. $. SGIH 26-4*.6 x. $. SGIH 26-*. x. $. See full selection of cutting tools on pages loris GT Cut-Off Insert Cutting Width Lead ngle List rice Grade 2 or 6 Each GTN 2* GT L/R 2* GTN 2.4* GT L/R 2.4* GTN * GT L/R * GTN 4* GT L/R 4* GTN 4.* GT L/R 4.* GTN * GT L/R * GTN 6* GT L/R 6* GTN * GT L/R * GTN 9* GT L/R 9* $. $.4 $9. $9. $6.99 $.2 $. $. $. $2. $. $ 9. $.69 $4. $2. $2.9 $2.6 $2. $.9 $.4 $.6 $.2 $.9 $.4 $9.9 $. $4.2 $4. $.6 $. $6. $6. $22. $2. $2.4 $.6 Specify left or right hand. Call for price over quantity. Inserts are priced individually, however, they must be purchased in packages of. For blades see page 46. SGIH 2-*.2 x.2 $9. SGIH 2-*. x.2 $9. SGIH 2-6*.2 x.2 $9. List rice Grade 6 Each age

19 LORIS DOULE-LOCK TOOL HOLDERS VILLE IN RIGHT OR LEFT HND VERSIONS ND DESIGNED TO CCET STNDRD INSERT. unique locking device exerts a two-way force on the carbide insert: downward and tight against shoulder to assure rigid, positive seating. STRIGHT STYLE LEFT HND SIDE CUTTING EDGE STYLE STRIGHT STYLE RIGHT HND LORIS ROFILING TOOL HOLDERS T & TL VILLE IN RIGHT OR LEFT HND VERSIONS FOR TURNING OR ROFILING. THESE HOLDERS CCOMMODTE STNDRD DIMOND SHE INSERTS. unique locking device which exerts a two-way force on the insert: downward and tight against the shoulder to assure rigid, positive seating. Insert choice determines positive or negative rake turning. Holders supplied as shown less carbide inserts. RIGHT HND SHOWN Clamp Clamp Screw HOLDER RIGHT LEFT ORDERING INFORMTION HOLDER RICE E. C D INSERT SIZE I.C. THICK CRIDE SET HEX LOCK IN RELCEMENT RTS LOCK SCREW CLM CLM SCREW T-6 T- T-6L T-L $2. $2. " " 4 6" /6 OR SM-* $.9 L-* $6. LS-* $. CK-2* $. STC-4* $4.9 ORDERING INFORMTION HOLDER HOLDER INSERT SIZE SIDE CUT D- D6- D-4 D-4 D- D2- RIGHT DS- DS6- DS-4 DS-4 DS- DS2- LEFT DS-L DS6-L DS-4L DS-4L DS-L DS2-L RICE E. $9. $.4 $2. $2. $2. $29.9 " " " " C 4 4 6" 6" " " D 9 /6 /6 /6 /6 I.C. THICK /6 /6 RELCEMENT RTS CRIDE SET HEX LOCK IN LOCK SCREW ST-* ST-* ST-2* ST-2* ST-* ST-* RICE E. $2.6 $2.6 $. $. $4. $4. L-* L-* L-2* L-2* L-* L-* RICE E. $2.6 $2.6 $.2 $.2 $. $. LS-* LS-* LS-2* LS-2* LS-* LS-* RICE E. $6. $6. $. $. $6.6 $6.6 Sold in package of pcs. CRIDE INSERTS FOR ROFILING TOOL HOLDERS LL INSERTS ELOW FIT NY OR L TOOL HOLDERS STYLE DNG NEGTIVE RKE STYLE DNMG NEGTIVE STYLE DNMZ " OSITIVE STYLE DNMS & up call for price. OSITIVE I.C. T R INSERT DNG-2* DNMG-2* DNMS-2* DNMZ-42* DNMS-42* 2/6 6 $6. $.6 $2.4 LORIS SERIES SIH CHMFERING, FCING & TURNING HOLDERS /6 /6 See full selection of inserts on pages $2.4 $26. $2. STYLE TNMG NEGTIVE CRIDE INSERTS FOR DOULE-LOCK TOOL HOLDERS DOULE-LOCK HOLDER # D-, DS-, DS-L, D6-, DS6-, DS6-L I.C. T R /6 INSERT TNM-2* 2/6 $.4 6 $2. loris SIH Series universal holders accommodate standard square carbide inserts and are designed for chamfering, facing and turning operations. SIH Series holders are available in four shank sizes and are designed for use in loris #, #2 and # quick-change dovetail tool holders or any square shank holder. loris SIH Series holders accommodate " I.C. and " I.C. carbide inserts. n insert holding screw is provided. STYLE TNM OSITIVE D-4, DS-4, DS-4L, D-4, DS-4, DS-4L D-, DS-, DS-L, D2-, DS2-, DS2-L /6 TNMG-42* TNM-42* TNMG-4* TNM-4* $2. $.2 $2. $6. $.9 $.4 $2.2 $24.4 HOLDER SIH-2 SIH- ORDERING INFORMTION HOLDER RICE E. C $4.4 $ D I.C. T R RELCEMENT RTS INSERT # 2/6 6 SD-* SD-* $6.4 $6.4 $.4 $.4 SCREW SD-SCR* SD-SCR* RICE E. $.6 $.6 SIZE -2 x -2 x Inserts are priced individually, however, they must be purchased in packages of. & up call for price. SIH-4 $. 4 /6 SD-2* $. $. SD-2SCR* $.6-24 x SIH- $62. 4 /6 SD-2* $. $. SD-2SCR* $.6-24 x See full selection of inserts on pages Sold in package of pcs. & up call for price. See full selection of inserts on pages age 4 age

20 LORIS TURNING HOLDERS T2 & T2N VILLE IN OSITIVE OR NEGTIVE RKE VERSIONS ND DESIGNED TO CCET STNDRD S. djustable carbide chipbreaker provides excellent chip control. Holders supplied as shown less carbide inserts. LORIS THREDING TOOL HOLDER MODEL T- RICE ECH T- $2. Especially designed to hold interchangeable high speed and carbide insert threading blades. When the cutting blade is mounted on the upper surface of the holder, and spindle direction reversed, thread cutting can be accomplished without danger of hitting shoulders, thereby speeding up threading operation. Lead angle adjustment is obtained through set screw changes. Various pitches of precision ground high speed steel threading blades for cutting merican standard 6, and cme 29, threads are available. Carbide inserts conveniently mount in place of the high speed blade when required. lease review the combination of high speed and carbide options listed below. CRIDE CHIREKER CRIDE SHIM CHIREKER CLM SCREW SHIM SCREW HIGH SEED THREDING LDES 6 Exclusive blade design with two cutting edges, precision ground, assures unusually long life. To resharpen, simply grind the top surface. ll blades are uniformly designed to fit any loris threading holder. RICE CCITY -4 $2. 4 or more T..I -6 $2. 6 or more T..I - $2. or more T..I HOLDER ORDERING INFORMTION RELCEMENT RTS HOLDER INSERT SIZE CRIDE SHIM SHIM SCREW CRIDE CHIREKER CHIREKER CLM SCREW OS. RICE E. C D I.C. THICK RICE RICE (SET OF ) RICE RICE T2-2 T2- T2-4 T2N- $2. $2. $6.4 $2. " " 4 4 6" 4 /6 /6 " /6 /6 SM-4* SM-4* SM-* SM-42* $.4 $.4 $. $.4 SM-4SS* SM-4SS* SM-SS* SM-42SS* $9.9 $9.9 $. $9.9 -R* -R* 2-R* -R* $2. $2. $2. $2. SCR-2* SCR-2* SCR-2* SCR-2* $. $. $. $. HIGH SEED THREDING LDES CME 29 Exclusive blade design with two cutting edges, precision ground, assures unusually long life. To resharpen, simply grind the top surface. ll blades are uniformly designed to fit any loris threading holder. THREDING LDE GUGE Gauge is used for quick and accurate checking of re-ground high speed parting or threading blades to maintain proper angle for accurate thread cutting. C- RICE CCITY T..I RICE C-4 4 T..I G # $24. C- T..I C-6 6 T..I C- C- C-9 NY SIZE: $. ea. T..I T..I 9 T..I C- T..I C-2 2 T..I C-4 4 T..I C-6 6 T..I T2N-4 $6.4 " " 6" " /6 CRIDE INSERTS FOR T2 ND T2N HOLDER # SM-26* $9.2 SM-26SS* $. 2-R* $2. INSERT I.C. T R 2/6 6 SCR-2* $. THREDING INSERT HOLDER ND INSERT 6 lade is reversible and has an adjustable insert for resharpening purposes. Inserts are stocked in grade 2 and 6. When ordering specify grade desired, otherwise grade 6 will be supplied. lade fits any loris threading holder. HOLDER CCITY RICE T- 6 6 TO 4 T..I. $6. T2-2 T2- T2-4 /6 TG-22* TG-22* TG-42* $6. $6. $9. $. $. $. THREDING CRIDE INSERT FOR HOLDER # T-6 INSERT STYLE TI 2/6 6 6 V 6 4 T-4R* $2.4 $29.9 Sold in package of pcs. HOLDER # T2N- T2N-4 & up call for price. LORIS SOCKET SCREW T WRENCHES These indispensable tools are essential in every Tool Room, Machine Shop, and to all other industrial users. Especially useful in hard-to-reach places. Speeds up all socket screw fastening. Greater torque pressure can be applied easily. Drivers are made of Special lloy Steel, hardened for longer service. Each set of comes in own plastic case. I.C. T R /6 INSERT TNG-2* TNG-42* See full selection of inserts on pages T -WRENCH TW-* TW-2* TW-* TW-4* TW-* TW-6* TW-* TW-* RICE ECH $. $. $. $2. $4.4 $.6 $.6 $.6 2/6 6 $6. $9.6 ORDERING INFORMTION WIDTH CROSS FLTS /6 /6 $. $6.2 OVERLL LENGTH TW SET* ( OF ECH) $.6 SET STND U INSERT CRTRIDGE loris Series V Threading Cartridge for two triangular 6 threading inserts C Screw D Screw LYDOWN INSERT CRTRIDGE loris Series H Threading Cartridge for two triangular 6 threading inserts LH RH C Screw D Screw CRTRIDGE T-V $9. T-2V $9. Dim. sq. sq. 6 6 Dim. C Replacement Screw # D Replacement Screw # CLM # CLM SCREW # INSERT IC KEY # /6 GTS-* $4. GTS-2* $. /6 x shcs CK-9* $4. /6 x shcs CK-9* $4. STC-9* $6. STC-9* $6. T-* $9. T-2* $.4 INSERTS: EXTERNL VERTICL 6 TRINGULR THREDING INSERTS USED WITH INSERT STYLE TI IC L CRTRIDGE 6 + os T-V TMC-2NV* 6 + Neg T-V TNMC-2NV* 6 V-RH 6 V-LH T-H $6. T-2H $9. os Neg Dim. sq. sq. os os Dim. /6 T-2V T-2V T-2H T-2H TMC-4NV* TNMC-4NV* C Replacement D Replacement Screw Screw S-T $. /6 x lg shcs S-4T $.9 /6 x lg shcs INSERTS: RTIL ROFILE 6 TRINGULR THREDING INSERTS STYLE TI IC L USED WITH INSERT CRTRIDGE 6 V-RH 4 os T-H 6ER-LG6-RH* 6 V-LH 4 os T-H 6ER-LG6-LH* 22ER-LN6-RH* 22ER-LN6-LH* 2/6 6 $4. $.9 $. $. $2.2 $.6 INSERT IC $2.2 $22.6 2/6 6 $. $. $. $. KEY # T-* $9. T-2* $.4 $.2 $.2 $4. $4. age 6 Sold in package of pcs. & up call for price. See full selection of inserts on pages age

21 Two-way adjustable rake with cutting angle positive stop LORIS DJUSTLE-SHNK TOOL HOLDERS FOR LEFT OR RIGHT HND TURNING, FCING OR CHMFERING. Crt. cradle lock screw The adjustable shank feature introduces added flexibility turning the shank 9 permits choice of shank and cutting tool alignment. The cartridge, with its 2 indexing positions at intervals, provides for many angular turning operations. See page for cartridge details. The two-way adjustable rake provides for right or left hand turning, facing and chamfering. Rake has cutting angle with positive stop. djustment is made by loosening cradle lock screw and selecting desired setting. Long MINI SWIVEL-CRTRIDGE TOOL HOLDERS FOR LEFT OR RIGHT HND TURNING, ORING, FCING ND CHMFERING. Integral High-Speed Steel Swivel Head Short Insert Clamp Screw Cartridge lock screw Standard carbide insert Standard triangular carbide insert has 6 cutting edges. Exclusive positive lock with 2-way force holding insert down and tight against shoulder. age Tool steel cartridge in Cartridge cradle ORDERING INFORMTION HOLDER T-2 T-4 RICE E. $4. $2. 4" 4 " C " D 4 /6 H STYLE TNMG NEGTIVE STYLE TNM OSITIVE STYLE TNMS OSITIVE /6 H /6 CRTRIDGE RICE E. CRT-2* $6. CRT-* $. CRIDE INSERTS FOR LORIS DJUSTLE-SHNK TOOL HOLDERS HOLDER # T-2 HOLDER # T-4 ILLUSTRTIONS SHOW WHT ONE SINGLE TOOL CN CCOMLISH ICTORIL DIGRM OF CRTRIDGE Tool Steel Cartridge adjuster every for right or left hand turning facing or chamfering. 2 positive lock positions. CRTRIDGE # CRT-2 CRTRIDGE # CRT- CRTRIDGE has 2 indexing positions at intervals. This means many angular turning and chamfering jobs can be done faster and easier. RELCEMENT RTS HEX LOCKING IN LOCKING SCREW L-2* L-* RICE E. $2. $4. LS-2* LS-* RICE E. $4. $6. CRDLES RICE E. CC-2S* $6. CC-S* $. INSERT I.C. T R 2/6 6 /6 TNMG-2 TNM-2 TNMS-2 $.94 $.4 $. $.2 $2. $2.2 I.C. T R /6 See full selection of inserts on pages INSERT TNMG-42 TNM-42 TNMS-42 Inserts are priced individually, however, they must be purchased in packages of. 2/6 6 $2. $.9 $.2 $.4 $2. $.4 & up call for price. Carbide Insert Swivel Head tool holder can be used with cartridge or high-speed steel swivel head. Indexing of every permits many angular turning and boring operations. djustment is made by just one turn of the lock screw, and selecting desired setting 2 positive lock positions. The cartridge accommodates triangular carbide insert with rake allowing internal and external threading. The high-speed steel swivel head has 6 included angle and can be ground to various job requirements. T-S T-S T-S ORDERING INFORMTION TOOL HOLDER SHORT RICE E. $6. $62. $2.6 SHNK SIZE x x 2 x x 2 x x ORDERING INFORMTION TOOL HOLDER LONG RICE E. T- $. T- $64.9 T- $. Sold in package of pcs. SHNK SIZE x x 4 x x x x 6 MIN. ORE DI. " SVE 2% ON SET OF TS-SET $4. SVE 2% ON SET OF TL-SET $6.6 Swivel Clamp Screw a short version with all of the desirable features of the holder described at left. Designed for mounting in boring bars, such as loris series for angular boring and threading. In addition, the short holder can be used in loris quick-change tool holders #6, #9 and # for multiple turning. For carbide insert and high-speed steel swivel heads, see table above. CRIDE INSERTS FOR MINI SWIVEL-CRTRIDGE TOOL HOLDERS HOLDER # CRIDE INSERT SWIVEL HED # T-,S CRT- T-, S CRT- T-, S & up call for price. HIGH SEED SWIVEL HED CRT-H* CRT-H* CRT-H* HIGH SEED SWIVEL HED CRT-H* CRT-H* CRT-H* CRT- RELCEMENT RTS SWIVEL CLM SCREW For Hi-Speed & Carbide Swivel Head RICE E. RICE E. $2.4 LS-C* $2.2 CRT-* $2.6 LS-C* $2.4 CRT-* $24. LS-C* $2. CRT-* RELCEMENT RTS SWIVEL CLM SCREW For Hi-Speed & Carbide Swivel Head RICE E. RICE E. $2.4 LS-C* $2.2 CRT-* $2.6 LS-C* $2.4 CRT-* $24. LS-C* $2. CRT-* See full selection of inserts on pages CRIDE INSERT SWIVEL HED RICE E. $2.2 $2.6 $. CRIDE INSERT SWIVEL HED RICE E. $2.2 $2.6 $. INSERT CLM SCREW LS-2L* LS-4* LS-6* LS-2L* LS-4* LS-6* INSERT I.C. T R 2/6 6 /6 /6 TG-2* TG-4* TGHL-4* TGHR-4* TG-4* TGHL-4* TGHR-4* $. $. $.64 $.64 $. $2. $2. $.4 $2. $.4 $.4 $2. $.4 $.4 RICE E. $2.2 $2.2 $2.2 INSERT CLM SCREW RICE E. $2.2 $2.2 $2.2 age 9

22 LORIS CRTRIDGE-HED ORING R FOR DEE HOLE ORING OERTIONS The loris boring bar/cartridge combination is designed for maximum rigidity, will not permit tool deflection. ll parts are heat treated for maximum strength. The cartridge, with its 2 indexing positions at intervals, provides for many angular boring operations. ngular positions are illustrated below. The two-way adjustable rake provides cutting angle with positive stop. djustment is made by loosening cradle lock screws and selecting desired setting. LORIS DJUSTLE CHIREKER ORING RS Heat-treated alloy steel Supplied with adjustable carbide chip-breaker and carbide shim to protect the boring bar ccommodates standard positive rake triangular inserts Used for boring to square shoulder Can be used with open slot holders # and #2, as well as heavy duty holders #4, #4, #4D, #4D, #, #4, #4 Chip-reaker is adjustable for perfect chip control Cartridge cradle Triangular Carbide Insert ICTORIL DIGRM OF CRTRIDGE uttonhead Chip-reaker Clamp Screw Standard triangular carbide insert has 6 cutting edges. CRTRIDGE has 2 indexing positions at intervals. This means many angular turning and chamfering jobs can be done faster and easier. ORING R C- C-2 ORDERING INFORMTION RICE E. ORING R SIZE MIN. ORE Square Round Length DI. $. " $4. " 2" INSERT SIZE I.C. Thick DJUSTLE CHIREKER RICE E. C-* $2. C-* $2. RELCEMENT RTS CHIREKER CLM SCREW CRIDE SHIM RICE E. RICE E. SCR-* $4.9 SM-4* $.4 SCR-2* $4.9 SM-4* $.4 CRIDE SHIM SCREW RICE SET OF SM-4SS* $9.9 SM-4SS* $9.9 C- $. /6 4" /6 C-* $2. SCR-* $6.6 SM-4* $.4 SM-4SS* $9.9 C-4 $24. 6" /6 C-46* $2. SCR-2* $. SM-* $. SM-SS* $. Exclusive positive lock with 2-way force holding insert down and tight against shoulder. ORDERING INFORMTION RELCEMENT RTS ORING R MIN. ORE TOTL CRTRIDGE LENGTH S D C RICE E. CRTRIDGE CRDLE HEX LOCKING IN DI. L RICE E. RICE E. RICE E. C4-2 C-2 C6- $26. $4. $ " " 22" /6 2 2" 2 " /6 /6 CRT-2* CRT-2* CRT-* $6. $6. $. CC-4* CC-* CC-6* $92. $. $. L-2* L-2* L-* $2. $2. $4. STYLE TNMG NEGTIVE STYLE TNM OSITIVE STYLE TNMS OSITIVE Tool Steel Cartridge adjuster every for right or left hand turning facing or chamfering. 2 positive lock positions. CRIDE INSERTS FOR LORIS CRTRIDGE-HED ORING RS ORING R # C4-2 C-2 CRTRIDGE # CRT2 I.C. T R Inserts are priced individually however, they must be purchased in packages of. ORING R # C6- CRTRIDGE # CRT /6 I.C. T R LOCKING SCREW RICE E. LS-2* $4. LS-2* $4. LS-* $6. INSERT 2/6 6 TNMG-2* TNM-2* TNMS-2* $.94 $.4 $. $.2 $2. $2.2 INSERT TNMG-42* TNMS-42* TNM-42* Inserts are priced individually, however, they must be purchased in packages of. /6 & up call for price. 2/6 6 $2. $.9 $2. $.4 $.2 $.4 & up call for price. INSERTS FOR DJUSTLE CHIREKER ORING RS I.C. T R LORIS REVERSILE ORING RS FOR SQURE TOOL ITS The loris boring bars are designed for 4 and 9 cutting tool positions. oth ends of the boring bar are broached in the same plane, so that either end can be used after removing the bar from the holder. NOTE: ll boring bars are supplied with screw wrench and tool bits. /6 INSERT TG-22* TG-42* 2/6 $6. $9. ORING R RICE E. $49. $.9 $69. $99. $4. $2.2 $292.6 ORING RS FOR SQ. TOOL ITS DESIGNED IN TWO MODELS: ONE FOR 4, OTHER FOR 9 CUTTING TOOL OSITION ORING R FOR 9 - CUTTING NGLE - FOR 4-9 CUTTING NGLE - RICE E. $4. $6. $4. $6. 6 $. $. Inserts are priced individually, however, they must be purchased in packages of. & up call for price. See full selection of inserts on pages DI. " 2" 2 LENGTH " 2" 4" 6" 22" 24" " SQURE CUTTER /6 /6 DI. LENGTH TOOL IT " " 6" 9" 6" 9" /6 /6 age 4 See full selection of inserts on pages age 4

23 LORIS DJUSTLE INSERT ORING RS n adjustable throw-away insert, boring bar designed especially for through boring, facing, or boring to a square shoulder or any lead angle. Fast, accurate positioning of the replaceable insert is accomplished by the simple adjustment of the positioning socket set screw and the locking flat head socket cap screw while the bar is mounted on the machine. For use with a lathe boring holder, milling machine, jig bore, CNC lathe, etc., the loris adjustable-insert boring bars are available in 4 popular sizes ranging from " to " shank diameters. They are offered as single units; or in a set, saving up to %. ll boring bars are products from high quality heat treated steel. LORIS INDEXLE CRIDE INSERT ORING RS ars are made of alloy steel and heat treated for maximum rigidity. opular triangular positive rake inserts are held securely by a flat head screw. vailable to bore holes with minimum size of /6 in manual and CNC lathes, also excellent in boring heads. May be cut to length using an abrasive cut off wheel. Flat Head Socket Cap Screw Socket Head djustment Screw age 42 % SVING ON SET OF 4 ORING RS ORDER # S- S-2 S- S-4 S- S-6 ORDER # L- L-2 L- L-4 L- L-6 RICE ECH $4. $. $. $. $. $96.6 RICE ECH $.9 $. $. $. $9. $96.6 SULIED WITH -6 CRIDE INSERT ORDERING INFORMTION (SHORT) SVE % LED NGLE ON SET OF 4 MIN. ORE DJUSTMENT INSERT DJUSTMENT SCREW DI. SIZE D L L RICE E. I.C. SS-* $.6 S-SET $29. SVE % ON SET OF 4 L-SET $.2 9 /6 /6 /6 ORDERING INFORMTION (LONG) MIN. ORE DI. 9 /6 /6 /6 /6 DJUSTMENT D " 4 4 6" 6" L " 6" " " 9" 9" FOR INSERTS SEE OOSITE GE L " " I.C. /6 I.C. I.C. I.C. I.C. INSERT SIZE I.C. I.C. /6 I.C. I.C. I.C. I.C. SS-* SS-* SS-2* SS-* SS-2* SS-* SS-* SS-* SS-2* SS-2* SS-2* $.6 $.6 $.4 $.6 $.4 LED NGLE DJUSTMENT SCREW RICE E. $.6 $.6 $.6 $.4 $.4 $4.4 S set consists of S S2 S S4 L set consists of L L2 L L4 RELCEMENT RTS INSERT CLM SCREW LS-4* LS-4* LS-6* LS-* LS-4* LS-* RELCEMENT RTS LS-4* LS-4* LS-6* LS-* LS-* LS-* RICE E. $2.2 $2.2 $2.2 $2.4 $2.2 $2.4 INSERT CLM SCREW RICE E. $2.2 $2.2 $2.2 $2.4 $2.4 $2.4 ORING R C- C-2 C- C-4 C- C-6 C- C-S RICE E. $. $6.2 $69. $.4 $. $9. $96. $6. MIN. ORE DI. /6 9 /6 /6 /6 /6 /6 SULIED WITH -6 CRIDE INSERT D L /6 9 /6 " " 4" " 6" " " 9" 9" 2" *INSERT SIZE INSERT CLM SCREW LS-4* LS-4* LS-4* LS-6* LS-* LS-* LS-* LS-* RICE E. $2.2 $2.2 $2.2 $2.2 $2.4 $2.4 $2.4 $2.4 INSERTS FOR LORIS DJUSTLE ND CRIDE INSERT ORING RS I.C. I.C. I.C. /6 I.C. I.C. I.C. I.C. I.C. STYLE STYLE I.C. T R STYLE TG TGHL /6 /6 /6 /6 TG-4* TGHL-4* TG-4* TGHL-4* TG-642* TGHL-642* TD-* TDHL-* Inserts are priced individually, however, they must be purchased in packages of. See full selection of inserts on pages /6 6 $. $2. $.64 $.4 $. $2. $2. $.4 $9.6 $. $2. $2. $. $. $.42 $2. & up call for price. age 4

24 LORIS SERIES T INTERNL THREDING RS LORIS T-9 DJUSTLE KNURLING HOLDER loris T Series threading bars can be used for internal right or left-hand threading. vailable in five sizes, these bars accommodate standard triangular-shaped throwaway threading inserts in a hardened seat. The T Series shank has three flat sides specially designed for use in loris boring bar holders #, #2, #, #4 and # 4. They may also be used in any loris boring bar holder. Excellent for CNC machines. " " 4" 2" max excellent knurling, with approach adjustability, is provided with the newly designed T-9 knurling holder. The T-9 is self-centering and is adjusted by means of a conveniently located knurled knob, providing the ideal near-verticalaxis approach angle for a wide range of stock diameters. Spindle and crossslide pressure are minimal, thus knurling of thin wall tubing is easily performed. The loris T-9, which is designed for use in any standard turret tool post or other open-slot holder, is also availalbe with dovetail mounting (series 9) to fit loris tool posts. recision ground, " O.D. x " wide, high-speed medium diamond knurls are supplied unless otherwise specified. RICE ECH T-9 $9. LORIS T-2 COMO CNC R ULLER KNURLING TOOL ORDERING INFORMTION ORING R RICE E. RIGHT HND LEFT HND C D L I.C. T-R T-L $99. 6 T-2R T-2L $.9 " T-R T-L $4.2 " 2 " " T-4R T-4L $44. /6 2 /6 2" INSERT SCREW RICE E. S2T* $2. ST* $. ST* $. ST* $. RELCEMENT RTS KEY RICE E. T* $9. T* $9. T* $9. T* $9. SHIM RICE E. " " " mounts into tool slot on CNC turrets easily adjustable with knurls installed the range is " 2". Opposing forces on knurls create little or no force on the machine. Just remove the two knurl lock screws, replace with bar grippers and use as a heavy duty bar puller. There are no gripper springs to remove when changing bar diameters. Just loosen the lockscrew, insert allen wrench and dial to the next size, preload approximately rev., lock locking screw. Furnished with " shank without knurls or grippers. Minimum clearance required between turret and covers is ". T-R T-L $2.9 /6 4" S4T* $.9 T2* $.4 YI4(RH)* YE4(LH)* $. $. " min to 2" max RICE ECH T-2 $42. R GRIERS GRIER (pair) T-2G* RICE IR $4.4 6 RTIL ROFILE INTERNL CRIDE THREDING INSERTS RH LH USE WITH ORING R # T- T-2--4 T- RIGHT HND LEFT HND I.C. THREDS (TI) 2/6 6 IT-R6* IT-L6* 6-4 $. $.2 IT-R6* IT-R6* IT-L6* IT-L6* Inserts are priced individually, however, they must be purchased in packages of $. $. & up call for price. $.2 $4. HIGH SEED KNURLS For #, #9, #2 Holders: D-Diamond/S-Straight/NEW Convex Hi-Cobalt (CD-Spiral & CS-Straight) KNURL-LOCK SCREW KNURL RICE E. D6R/D6L/S6* CD6R/CD6L/CS6* CORSE MEDIUM 6. D & S. CD & CS (NEW) TiN COTED SCR-* D2R/D2L/S2/D2R* D2L/S2/CD2R/CD2L* CS2/CD2R/CD2L/CS2* DR/DL/S* CDR/CDL/CS* FINE Used with any #, #9 and #2 holder RICE E. $. age 44 age 4

25 LORIS UNIVERSL LTHE SINDLE ND COLLET STOS FOR USE IN CNC, MNUL LTHES & INDEXING HEDS SGIH CUT-OFF & GROOVING LDES Fully adjustable to fit a wide variety of applications (ranges listed in chart below). Cut time dramatically on jobs where the part must be registered in machine more than one time or where more than one part is to be machined. Just slide the body into the spindle of the machine, rotate the T-handle wrench which expands keys which lock the body securely into position. When the chuck or collet is opened, and the next piece loaded into machine all distances from the stop will repeat exactly. Regular Style Inserts are securely held in Wedge-Lock blades by a tapered locking system. No additional clamping devices are required. Extraction tool included. ositive Stop Style Inserts are securely held in Wedge-Lock blades by a tapered locking system featuring a ositive Stop that prevents insert drift and the blade pocket from spreading once the insert is set firmly in place. No additional clamping devices are required. Wedge-Lock ositive Stop blades are used with existing GTN inserts and tool blocks. Extraction tool included. ➅ COMLETE SET CONSISTS OF: ➀ ody, with adjustable locking jaws and threaded and tapered pin which has square end shank and spring loaded locking ball. ➁ Short extension bar. ➂ Long extension bar. ➃ ar for use with collets. ➄ Socket T-handle wrench. ➅ Removable cup, to fit short and long extension bars, for use when machining tubing. age 46 ➁ ➀ C ody with Scr/Gibs/Rings* Taper Screw* Gibs (Set of )* O Rings (Set of 2)* Long Extension* Short Extension* T-Handle Wrench* ➂ ORDERING INFORMTION RICE ECH C S- S- S- S-2 S- S-4 S- $2. $24. $9. $4. $49. $. $, /6 4 6 / /6 6 6 Spindle stop is supplied with screw wrenches. SINDLE STO RELCEMENT RTS $2. $6. $. $. $2. $24. $4. ➃ $2. $6. $. $. $2. $24. $4. DESIGN FETURES: Completely self-centering. Only a few seconds to install. Greater rigidity insures duplication. Cannot vibrate or change position once it is locked. Rejections cut to a minimum. $26. $2. $64. $. $. $. $4. ➄ S- S- S- S-2 S- S-4 S- $24. $. $2. $. $4. $9. $64. $49. $4. $94. $. $64. $4. $. $49. $9. $2. $. $. $6. $99. $626. $22. $29. $6.2 $92. $. $2. TO FIT SINDLE SIZE 9 /6" to 2 " " to /6" " to " /6" to /6" " to 2 /6" 2 " to " " to 4 " ORDERING INFORMTION Designation List rice ositive Regular Stop each SGIH S* $2. SGIH 9- $2. SGIH S* $2. SGIH 26- -S* $. SGIH S* $. SGIH 26- -S* $. SGIH S* $9. SGIH 2- -S* $94. SGIH S* $. SGIH 2- -S* $9. SGIH S* $9. SGIH 2- -S* $6. SGIH S* $6. Quantities over, call for price. CNC Tool locks List rice each $. $2.9 $.9 $.9 $9. $29. $. $9. $2. $2. $4. $. SGTN Series Simple block design accommodates Wedge-Lock and competitive blade systems. Unique wedge clamp provides firm seating for light and heavy duty cut-off and grooving operations. Two piece design provides stability, strength and correct alignment of blade for maximum performance. The two piece design facilitates easy installation to many CNC machining centers. Can be utilized for left or right hand operations. Width=W ±.4./.9.2./ / / D Max. 4 4 /6 /6 /6 L 4 /6 4 /6 4 /6 4 /6 4 /6 ORDERING INFORMTION H H See page 4 for price Insert Style GTN/R/L -2, 2.4 GTN/R/L - GTN/R/L -2, 2.4 GTN/R/L - GTN/R/L -4 GTN/R/L -4., GTN/R/L -6 GTN/R/L - GTN/R/L -4 GTN/R/L -4., GTN/R/L -6 GTN/R/L - GTN/R/L -9 Catalog Number List rice C D E Regular or ositive lade Styles See above SGTN 6-2* SGTN 6-* $. $4.2 /6 /6 /6 /6 SGIH 9-2 SGIH 26-2 SGIH 26- SGTN 9-* $42. /6 /6 SGIH SGIH 26- SGTN 2-* $4.2. /6 SGIH 26-6 SGTN 9-6* SGTN 2-6* SGTN 2-6* $42. $4.2 $ /6 4 /6 4 /6 /6 /6 SGIH 2- SGIH 2-4 SGIH 2- SGIH 2-6 SGTN 2--6* $. 4 /6 9 SGIH 2-6 SGIH 2- SGTN.6* $4.9 4 /6 2 2 SGIH 2-9 For large quantities, call for price. age 4

26 LORIS # CUT-OFF SYSTEM LORIS CRIDE INSERTS -2 specially formulated grade of tungsten carbide with a unique combination of high strength and abrasion resistance. The -2 is an excellent choice for cast iron, high temperature alloys, and non-ferrous materials. -2 n uncoated grade used for machining 2 + series stainless steel; cast iron (gray), malleable irons, ductile irons, brass, bronze, carbon, plastic, fiberglass, high temp alloy, nickel and cobalt base. [i.e. rene 4, (inconel w, x, 2, ) (m 22 washpaloy) hastelloy, inconel 6, TD-2, HS2, HS, HS 6, L 6) titanium {i.e. (Ti -2. SN) (Ti ) (Ti 6-4V) (Ti 6-6V-2n) (Ti -4 Mo) (Ti Mo-V) (Ti ) (Ti ) (Ti 4) aluminum (i.e. 2T, 242T, 66T] -6 specially formulated grade of tungsten carbide with an excellent combination of toughness and hardness for turning, boring, and grooving on steel and alloyed cast iron. The -6 may be utilized at moderate cutting speeds with medium feeds. -6 n uncoated grade used for machining low, medium, and high carbon steel [i.e.,, 2, series], alloy steel [i.e., 2,, 4,, series], cast steel [i.e. carbon and alloy], nodular iron. age 4 # Holder without blade. # Holder with original high-speed cut-off blade. # Holder Series Ordering # rice Each X- $.6 X-R $. X- $. X-R $. CX- $2. CX-R $4. C- $66. C-R $4. D- $9. D-R $2. E- $2. E-R $2. GROOVING High Speed Cut-Off lade Ordering # rice Each -2 width " $ width.2" $26. -W width.2" $26. - width." $. - width." $49. - width." $49. TOOL GTR- HND OF TOOL R=RIGHT, N=NEUTRL, L=LEFT ick the grade to fit your application. WIDTH 6 strong steel cutting grade ideal for cut-off and grooving applications, coated with Titanium Nitride (gold) for additional wear properties. 2 Our best fine-grain uncoated grade for cast iron, nonferrous metals and high-temp alloys. 6 strong steel cutting grade, uncoated, for low to medium speed operations. GT Cut-Off Inserts vailable ositive, and High ositive vailable in Neutral, Left Hand, Right Hand, Coated & Uncoated # Holder with NEW wedge lock carbide insert blade. Wedge-Lock Carbide Insert lade Ordering # rice Each SGIH 9-C- $.6 SGIH 26-4C- $9.4 SGIH 26-4C-CX $6.2 SGIH 2-4.C-C $4. SGIH 2-4.C-D $4. SGIH 2-4.C-E $4. Catalog Number Cutting Edge Geometry loris GT Cut-Off Insert Cutting Width Lead ngle loris GT Inserts. Carbide Inserts Ordering # GTL, GTN, GTR width.2 GTL 4, GTN 4, GTR 4 width.6 GTL 4, GTN 4, GTR 4 width.6 GTL 4., GTN 4., GTR 4. width. GTL 4., GTN 4., GTR 4. width. GTL 4., GTN 4., GTR 4. width. List rice Grade 2 or 6 Each List rice Grade 6 Each GTN 2* GT L/R 2* GTN 2.4* GT L/R 2.4* GTN * GT L/R * GTN 4* GT L/R 4* GTN 4.* GT L/R 4.* GTN * GT L/R * GTN 6* GT L/R 6* GTN * GT L/R * GTN 9* GT L/R 9* $. $.4 $9. $9. $6.99 $.2 $. $. $. $2. $. $9. $.69 $4. $2. $2.9 $2.6 $2. $.9 $.4 $.6 $.2 $.9 $.4 $9.9 $. $4.2 $4. $.6 $. $6. $6. $22. $2. $2.4 $.6 Inserts are priced individually, however, they must be purchased in packages of. Insert Information & ricing on ages 49 to 4. 6 specially formulated substrate carbide grade with a (gold) multi-layer coating with a broad application range for turning, milling, grooving, and cut-off purposes. The 6 exhibits high hardness at elevated temperatures and it also works well in most large depths of cut. This grade accommodates moderate to high speed machining on low, medium, and high carbon steels as well as alloy and tool steels. 6 coated grade used for machining low, medium, and high carbon steel [i.e.,, 2, series], alloy steel [i.e, 2,, 4,, series], cast steel [i.e. carbon and alloy], nodular iron. SHE OR CHIREKER DEICTED TG TGHL TGHR CHIREK MN CHIREK RN CHIREK MN CHIREK RN CNMZ Quantities of and over, call for price. SD-* SD-2* I.C. THICK- NESS /6 RDIUS HOLE S T-4R* TD-* TDHL-* TG-2* TG-4* TG-4* TG-642* TGHL-4* TGHL-4* TGHL-642* TGHR-4* TGHR-4* CNMG-4 MN* CNMG-42 MN* CNMG-4 MN* CNMG-44 RN* CNMG-42 RN* CNMG-4 RN* CNMG-642 RN* CNMG-64 MN* CNMG-644 RN* CNMZ-42 M* CNMZ-4 M* CNMZ-642 M* CNMZ-64 M* /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 Inserts sold in packages of. rices are per piece. 2/ / / age 49

27 LORIS CRIDE INSERTS LORIS CRIDE INSERTS SHE OR CHIREKER DEICTED DNG-2* I.C. THICK- NESS /6 RDIUS HOLE S 2/ SHE OR CHIREKER DEICTED TNMC 2 NT 6* I.C. THICK- NESS RDIUS HOLE 2/ DNG DNMG CHIREK MN DNMG DNG-42* DNG-4* DNMG- LR-* DNMG-2 LR-* DNMG- MN* DNMG-4 LR-* DNMG-42 LR-* OSITIVE DNMS-42* CHIREK MN CHIREK MN CHIREK MN DNMZ-42 M* DNMZ-2 M* DNMZ-42 M* /6 /6 /6 /6 /6 /6 / NT-2 R & L HND* NT- R & L HND* TNMC TNMC TNMC 2 NT * TNMC 2 NT * TNMC 2 NT 2* TNMC 4 NT 4* TNMC 4 NT * TNMC 4 NT 6* TNMC 4 NT * TNMC 4 NT * TNMC 2 NV* TNMC 4 NV* TNMC 4 NV* TNMC 64 NV* TNMC 66 NV* TNMG-22 MN* NT NT-4 R & L HND* TNMG-222 MN*.9. NT-2 OS R & L HND* TNMG- MN* / NT- OS R & L HND* 2.. TNMG-2 MN* / NT TNG NT-4 OS R & L HND*. 4. TNG 2* TNG 22* TNG 2* TNG 4* TNG 42* TNG 44* TNM 2 NT 6* TNM 2 NT * TNM 2 NT * TNM 2 NT 2* TNM 4 NT 4* TNM 4 NT * /6 / / TNMG CHIREK RN CHIREK MN TNMG TNMS TNM TNMG- MN* TNMG-4 MN* TNMG-42 MN* TNMG-4 RN* TNMG-42 MN* TNMG-4* TNMG-44* TNMS-* TNMS-2* TNMS-4* TNMS-42* TNM-2* TNM-42* TNM-4* /6 /6 /6 /6 /6 /6 /6 /6 /6 / / TNM 4 NT 6* TNM 4 NT * Quantities of and over, call for price. Inserts sold in packages of. rices are per piece. TNM TNM 4 NT * TNM 2 NV* TNM 4 NV* TNM 4 NV* TNM 64 NV* TNM TNM 66 NV* Quantities of and over, call for price. Inserts sold in packages of. rices are per piece. LORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY VENUE.O. OX 29 CLIFTON, NJ -29 TEL : FX: TOLL FREE:.2. E-MIL: aloris@aloris.com WESITE: The originator of quick change tooling age age

28 LORIS CRIDE INSERTS LORIS CRIDE INSERTS SHE OR CHIREKER DEICTED I.C. THICK- NESS RDIUS HOLE S 2/6 6 SHE OR CHIREKER DEICTED I.C. THICK- NESS RDIUS HOLE S 2/6 6 TG-22* WNMG- MN* /6..6. TG-222* WNMG-2 MN* /6..6. TG-22* WNMG- MN* /6..6. TG-224* / WNMG-4 MN* / TG-2* 6.. WNMG-42 MN* / TG-22* 6.. WNMG WNMG-4 MN* / TG-2* Quantities of and over, call for price. TG-24* / TG-4* /6 9.. TG TG-42* TG-4* TG-44* TM 2 NT 6* TM 2 NT * TM 2 NT * /6 /6 / / SHE OR CHIREKER DEICTED LY DOWN THREDING INSERTS I.C. THICK- NESS RDIUS HOLE S X Y TI 2/6 S 4 IT-R6* TM 2 NT 2* IT-L6* TM TM 4 NT 4* TM 4 NT * TM 4 NT 6* TM 4 NT * TM 4 NT * IT-R/L6 IT-R6* IT-L6* IT-R6* IT-L6* ER LG 6-RH* ER LG 6-LH* TM TM 2 NV* TM 4 NV* ER/L6 22ER LN 6-RH* ER LN 6-LH* TMC 2 NT 6* Inserts sold in packages of. rices are per piece. TMC 2 NT * TMC 2 NT * TMC 2 NT 2* TMC 4 NT 4* TMC 4 NT * TMC 4 NT 6* NOW VILLE FROM LORIS LORIS/YES TOOL QUICKTI DRILLS TMC 4 NT * TMC TMC 4 NT * TMC 2 NV* TMC TMC 4 NV* TU-2* TU-22* TU-2* TU TU-24* / Quantities of and over, call for price. Inserts sold in packages of. rices are per piece. CLL FOR COMLETE CTLOG age 2 age

29 LORIS CUT-OFF ND GROOVING INSERTS FX ORDER FORM FOR Fax: ITEMS MRKED WITH N *(STERISK) age 4 Catalog Number Cutting Edge Geometry GT Cut-Off Insert Cutting Width Lead ngle List rice Grade 2 or 6 Each List rice Grade 6 Each GTN 2* GT L/R 2* GTN 2.4* GT L/R 2.4* GTN * GT L/R * GTN 4* GT L/R 4* GTN 4.* GT L/R 4.* GTN * GT L/R * GTN 6* GT L/R 6* GTN * GT L/R * GTN 9* GT L/R 9* $. $.4 $9. $9. $6.99 $.2 $. $. $. $2. $. $9. $.69 $4. $2. $2.9 $2.6 $2. $.9 $.4 $.6 $.2 $.9 $.4 $9.9 $. $4.2 $4. $.6 $. $6. $6. $22. $2. $2.4 $.6 Specify left or right hand. Call for price over quantity. Inserts are priced individually, however, they must be purchased in packages of. For blades see page 46. GROOVING LORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY VENUE.O. OX 29 CLIFTON, NJ -29 TEL : FX: TOLL FREE:.2. E-MIL: aloris@aloris.com WESITE: TOOL GTR- HND OF TOOL R=RIGHT, N=NEUTRL, L=LEFT WIDTH CUTTING EDGE GEOMETRY OSITIVE ositive ( Style) for ositive Cutting ction (Stock standard) loris Style insert is ideal for Series stainless steel, hightemperature alloys, cast iron, chrome and nickel based alloys. ick the grade to fit your application. 6 strong steel cutting grade ideal for cut-off and grooving applications, coated with Titanium Nitride (gold) for additional wear properties. 2 Our best fine-grain uncoated grade for cast iron, nonferrous metals and high-temp alloys. 6 strong steel cutting grade, uncoated, for low to medium speed operations. The originator of quick change tooling We make it easy! Call, fax or mail... Use this form as a handy worksheet and then call us at or toll free at.22. (between am and 4: pm EST) with your credit card information (we accept all major credit cards: merican Express, MasterCard, VIS and Discover). OR... Complete the order form and fax it to us at (24 hours a day). OR... Complete the order form and mail it to us at loris Tool Technology,.O. ox 29, Clifton, NJ -29. For fax or mail orders, please check one: Check or Money Order Enclosed lease ship C.O.D. urchase Order No. Contact Name Title Telephone Number ( ) ill To: (lease print) Company Name ddress City State Zip Ship To: (if different from information above) Company Name ddress City State Zip Contact Name urchase Order No. (if necessary) Shipping Instructions DESCRITION RICE ECH QUNTITY NOTE: Tax and freight charges will be automatically added to your order. a y z r Conditions, terms, and prices are subject to change without notice. FX ORDER TO: SUTOTL TX FREIGHT TOTL TOTL RICE age

30 OLICY ND ROCEDURES. MINIMUM ORDERS: ll orders will be a minimum of $2. net. ny orders less than minimum will be charged at the $2. minimum rate. 2. TERMS: % days NET days. Discounts are to be taken as per our terms and any extended discounts will be considered as partial payments in accordance with New Jersey UCC Code Section -2. ast due accounts, over 4 days, will be charged % interest per month and all orders will be placed on CREDIT HOLD and not reissued into production until the account is up to date.. DELIVERY: ll merchandise will be shipped FO, loris Factory, Clifton, N.J.,. We ship US, unless otherwise specified. ll merchandise will be shipped in partial shipments, unless notified to the contrary. The majority of orders will be shipped within 4 hours. 4. CLIMS/SHORTGES/SHORT SHIMENTS: Claims, shortages, or short shipments must be reported within days after receipt of merchandise. ackaging must be intact and all claims must be reported through delivering carrier. ackaging must be retained for damaged goods inspection. lease always refer to our order number.. RETURNS/RESTOCKING CHRGES: ll returns must be authorized and accompanied by an RG number issued by loris and shipped prepaid. We will accept returns within a day period as long as items have not been used. If the error was our responsibility, there will be NO restocking charge. ll other returns will be subject to a restocking charge of 2%. If the goods require refurbishing, an additional charge will be levied. loris reserves the right to inspect and approve all returns. 6. GURNTEE/SERVICE: The products are guaranteed to be free from defect in material and workmanship. roducts will be repaired or replaced, at our option, at no charge unless items have been: misused, abused, accidentally damaged or normal wear and tear and also where alterations or modifications were or have been made by anyone other than loris. Repairs not covered by the foregoing guarantee will be made at net pricing and shall be payable persuant to the foregoing terms.. RICES: rices are guaranteed at time of order into production. rices are subject to change without notice. The 22 Catalog supercedes any pricing, policies and procedures from any previous catalog.. REIRS/SECILS: Repairs and parts are quoted as soon as possible. loris Tool will manufacture these products. ll special tooling products are on a quotation basis and are non-returnable and non-cancellable once order is received. 9. RELCEMENT RTS: ll items marked with an *(asterisk) after the order number, specials, and repairs are available directly from the manufacturer, and may be purchased at list price with any major credit card, or COD. Conditions, terms, and prices are subject to change without notice. ny typographical or other error in this catalog is subject to correction. LORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY VENUE.O. OX 29 CLIFTON, NJ -29 TEL : FX: TOLL FREE:.2. E-MIL: aloris@aloris.com WESITE: The originator of quick change tooling age 6

31 LORIS TOOL TECHNOLOGY CO., INC. 9-4 GETTY VENUE.O. OX 29 CLIFTON, NJ -29 U.S.. TEL: FX: TOLL FREE:.2. Website: Distributed by:

ALORIS TOOL TECHNOLOGY CO., INC. All Aloris products are

ALORIS TOOL TECHNOLOGY CO., INC. All Aloris products are ALORIS TOOL TECHNOLOGY CO., INC. 2 CATALOG The Originator of Quick Change Tooling All Aloris products are proudly made in the USA. INTRODUCING ALORIS INDEXABLE TOOL OSTS & SETS New roduct Built By The

More information

Tel / (USA & CANADA) /

Tel / (USA & CANADA) / MACHINE SHOP DISCOUNT SUPPLY Tel 0.8.87 / 800.88.09 (USA & CANADA) / Email sales@msdiscounttool.com SUPER PRECISION WEDGE TYPE TOOL POST AND TOOL HOLDER SETS Wedge Type Tool Posts are precision engineered

More information

STAR TOOL SUPPLY / GRAND TOOL SUPPLY

STAR TOOL SUPPLY / GRAND TOOL SUPPLY SUPER PRECISION WEDGE TYPE TOOL POST AND TOOL HOLDER SETS Wedge Type Tool Posts are precision engineered to assure repetitive accuracy. Advanced design provides built in quick tool changing versatility

More information

ACCESSORIES.

ACCESSORIES. Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com

More information

'\QDPLF# Tooling Catalog 20 0DFK#0DFKLQH#5HVRXUFHV/#,QF1# Phone: (949) Fax : (949)

'\QDPLF# Tooling Catalog 20 0DFK#0DFKLQH#5HVRXUFHV/#,QF1# Phone: (949) Fax : (949) '\QDPLF# 0DFK#0DFKLQH#5HVRXUFHV/#,QF1# Tooling Catalog 20 Phone: (949) 481-3375 Fax : (949) 481-8559 Multi-Position Tool Stations When fast changeover is critical Ideal for mounting groups of tools for

More information

Lathe Accessories. Work-holding, -supporting, and driving devices

Lathe Accessories. Work-holding, -supporting, and driving devices 46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding

More information

MACHINE TOOL ACCESSORIES

MACHINE TOOL ACCESSORIES VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE

More information

Tool Post & Tool Holders. Section B of 2017 Machine Tool Accessories Catalog

Tool Post & Tool Holders. Section B of 2017 Machine Tool Accessories Catalog Tool Post & Tool Holders Section B of 2017 Machine Tool Accessories Catalog Tool Post and Toolholders Contents Tool Post and Toolholders For CNC and Manual Lathes Technical Support Manual Lathe Terminology

More information

Typical Parts Made with These Processes

Typical Parts Made with These Processes Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts

More information

ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS

ACCESSORIES CATALOG.  SKODA LIVE CENTERS BORING AND FACING HEADS ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through

More information

Turning and Lathe Basics

Turning and Lathe Basics Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques

More information

TURNING BORING TURNING:

TURNING BORING TURNING: TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single

More information

TOOL HOLDER SYSTEMS FOR

TOOL HOLDER SYSTEMS FOR TOOL HOLDER SYSTEMS FOR HAAS OL-1 CNC OFFICE LATHE AND HAAS HPCL CNC TOOLROOM LATHE FOR ANY ADDITIONAL INFORMATION, OR INQUIRIES ON PURCHASING, CONTACT YOUR LOCAL HAAS FACTORY OUTLET ONLINE TECHNICAL INFORMATION

More information

Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY

Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form

More information

Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions

Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization

More information

ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS

ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two

More information

CNC EXPANDING MANDRELS

CNC EXPANDING MANDRELS CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate

More information

Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19

Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19 TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free

More information

Introduction to Machining: Lathe Operation

Introduction to Machining: Lathe Operation Introduction to Machining: Lathe Operation Lathe Operation Lathe The purpose of a lathe is to rotate a part against a tool whose position it controls. It is useful for fabricating parts and/or features

More information

MACHINING PROCESSES: TURNING AND HOLE MAKING. Dr. Mohammad Abuhaiba 1

MACHINING PROCESSES: TURNING AND HOLE MAKING. Dr. Mohammad Abuhaiba 1 MACHINING PROCESSES: TURNING AND HOLE MAKING Dr. Mohammad Abuhaiba 1 HoweWork Assignment Due Wensday 7/7/2010 1. Estimate the machining time required to rough cut a 0.5 m long annealed copper alloy round

More information

Complete O.D. Machining in One Operation

Complete O.D. Machining in One Operation MFDODM209 Complete O.D. Machining in One Operation Including: Hydra-Drive For Extreme Accuracy CREATING INNOVATIONS IN FACE DRIVING TECHNOLOGY www.facedrivers.com Complete O.D. Machining in one Operation

More information

SPINDLE ADAPTER SELECTION GUIDE

SPINDLE ADAPTER SELECTION GUIDE CHUCK JAWS RETENTION KNOS SPINDLE ADAPTER SELECTION GUIDE DETERMINING SPINDLE TYPE & SIZE Type A1 and A2 s with A2 mounts can be installed on either A1 or A2 spindle nose. Camlock Type D1 Nose Type A1

More information

ROYAL ULTRA-PRECISION ER COLLETS " TIR

ROYAL ULTRA-PRECISION ER COLLETS  TIR ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece

More information

VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up

VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will

More information

ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS

ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill

More information

COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS

COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.

More information

MINI-LATHE QUICK CHANGE TOOL POST

MINI-LATHE QUICK CHANGE TOOL POST MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here

More information

Bevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR

Bevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR T-SLIDE BEVEL - ABS HANDLE For determining existing angles or transferring angles onto a workpiece Slotted hardened steel blade allows the user to accommodate a wide range of different size work pieces

More information

Lathes. CADD SPHERE Place for innovation Introduction

Lathes. CADD SPHERE Place for innovation  Introduction Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to

More information

Universal Machining Chucks. 4-Jaw Vertical

Universal Machining Chucks. 4-Jaw Vertical Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body

More information

Lathe. A Lathe. Photo by Curt Newton

Lathe. A Lathe. Photo by Curt Newton Lathe Photo by Curt Newton A Lathe Labeled Photograph Description Choosing a Cutting Tool Installing a Cutting Tool Positioning the Tool Feed, Speed, and Depth of Cut Turning Facing Parting Drilling Boring

More information

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL.

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. Drilling Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. The machine used for drilling is called drilling machine. The drilling operation

More information

STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip

STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers

More information

Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19

Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19 TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free

More information

New Jigs to Close Space Nurlock Adapter Tips, Liners, Locating Lock Screws and TLC Clamps

New Jigs to Close Space Nurlock Adapter Tips, Liners, Locating Lock Screws and TLC Clamps New Jigs to Close Space Nurlock dapter Tips, Liners, Locating Lock Screws and TLC Clamps New Universal Locating and Spacing Fixtures, Nurlock Shanks, Collars, Lock Screws and TLC Clamps. Spacing and location

More information

Turning and Related Operations

Turning and Related Operations Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.

More information

PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT

PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT F8A F8A with Big Block Merlin Features The F Series Boring Machines are unlike anything else available to the automotive and diesel engine

More information

MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS

MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Designed to work exclusively with the

More information

1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe

1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe 1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe

More information

LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY

LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic

More information

überchuck High Performance Milling Chucks

überchuck High Performance Milling Chucks überchuck High Performance Milling Chucks 00 Years of Innovation For more than 00 years, the name lbrecht has been synonymous with innovation and quality. In 908, the Joseph lbrecht Bohrfutterfabrik GmbH

More information

Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2

Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2 Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2 Published by SOLAS 2014 Unit 1 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction...

More information

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit

More information

TRAINING MANUAL. Part 3 REAMERS

TRAINING MANUAL. Part 3 REAMERS PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.

More information

TAPPING CHUCKS & COLLETS

TAPPING CHUCKS & COLLETS TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression

More information

Wettstein Tool TECHNOLOGIES. Milling Accessories. No. A C Air Collet Fixture. Manufacturers of Specialty TECHNOLOGIES INC.

Wettstein Tool TECHNOLOGIES. Milling Accessories. No. A C Air Collet Fixture. Manufacturers of Specialty TECHNOLOGIES INC. Wettstein Tool Milling Accessories No. A1 212 5C Air Collet Fixture For use with standard Hardinge 5C Collets. Designed especially for high production applications. Their light weight and compact size

More information

Reamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed

Reamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed 1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter

More information

15L Slant-PRO TM CNC LATHE

15L Slant-PRO TM CNC LATHE 15L Slant-PRO TM CNC LATHE INDEX Product Overview p. 2 Specifications p. 3 Options p. 4 Workholding pp. 5-8 Toolholding pp. 9-12 Warranty p. 16 ENABLING YOUR IDEAS Tormach 15L Slant-PRO CNC Lathe PRODUCT

More information

DRILL BITS & THREAD REPAIR DRILL BITS

DRILL BITS & THREAD REPAIR DRILL BITS DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes

More information

ROOP LAL Unit-6 (Milling) Mechanical Engineering Department

ROOP LAL Unit-6 (Milling) Mechanical Engineering Department Notes: Milling Basic Mechanical Engineering (Part B, Unit - I) 1 Introduction: Milling is a machining process which is performed with a rotary cutter with several cutting edges arranged on the periphery

More information

DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation

DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High

More information

Industrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)

Industrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm) Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece

More information

Premium Power Tool Accessories Proudly Made in the USA

Premium Power Tool Accessories Proudly Made in the USA Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a

More information

Technical T-A & GEN2 T-A GEN3SYS APX. Revolution & Core Drill. ASC 320 Solid Carbide. AccuPort 432. Page CONTENTS. Set-up Instructions 256

Technical T-A & GEN2 T-A GEN3SYS APX. Revolution & Core Drill. ASC 320 Solid Carbide. AccuPort 432. Page CONTENTS. Set-up Instructions 256 Technical ASC 0 Solid Carbide CONTENTS Page Set-up Instructions 6 AccuPort 4 Recommended Speeds & Feeds 60 Guaranteed Application Request Form 99 +44 (0)84 400 900 +44 (0)84 400 0 enquiries@alliedmaxcut.com

More information

PARTING ISCAR PARTING USER GUIDE. Parting and Grooving. Insert Positioning

PARTING ISCAR PARTING USER GUIDE. Parting and Grooving. Insert Positioning 90 80 0 70 10 60 20 50 30 40 Parting and Grooving Selection of Inserts For a proper match of insert and cutting material to application, the following variables must be taken into consideration: Width

More information

KEO Cutters a name you can trust!

KEO Cutters a name you can trust! KEO utters a name you can trust! The world of cutting tools is changing every day. KEO utters is getting better every day as we implement and execute our continuous improvement strategies. This new catalog

More information

MACHINE TOOL ACCESSORIES

MACHINE TOOL ACCESSORIES DA80 COLLETS, COLLET CHUCKS AND KITS SERIES 992: Full /32" range of collapse. Concentricity within 0.0005" T.I.R. at collet nose assembled with chuck. Self release for rapid, easy operation. Interchangeable

More information

Tool & Cutter Grinder

Tool & Cutter Grinder Tool & Cutter Grinder The Bonelle Tool and Cutter grinder (based on prof. Chaddock s Quorn) can be used to grind most kind of tools from lathe tools to end-mills and reamers. I have been grinding my end-mills

More information

ROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table

ROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table Horizontal & Vertical Rotary Table (HVRT) OPERATION AND SERVICE MANUAL Tilting Rotary Table Horizontal & Vertical Rapid Indexer VERTICAL AND HORIZONTAL ROTARY TABLE This Horizontal & vertical table is

More information

SAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500

SAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500 SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy

More information

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated

More information

PRAZI USA. Model PR-3900 Owners Manual. Please read this manual in its entirety before using the PRAZI ChestMate.

PRAZI USA. Model PR-3900 Owners Manual. Please read this manual in its entirety before using the PRAZI ChestMate. PRAZI USA Model PR-3900 Owners Manual Please read this manual in its entirety before using the PRAZI ChestMate. PRAZI USA 214 Rear South Meadow Rd (800)-262-0211 Plymouth MA, 02360 www.praziusa.com ChestMate

More information

Unequalled accuracy. The Clausing is a precision machine tool built to tolerances that are tightest in the industry " at spindle nose.

Unequalled accuracy. The Clausing is a precision machine tool built to tolerances that are tightest in the industry  at spindle nose. CATALOG 1258-4 Unequalled accuracy The Clausing is a precision machine tool built to tolerances that are tightest in the industry. Spindle taper (internal).0002" run-out is within.0002" at spindle nose.

More information

CNC BAR PULLERS EASILY AUTOMATE ANY CNC LATHE FOR LIGHTS-OUT PRODUCTION

CNC BAR PULLERS EASILY AUTOMATE ANY CNC LATHE FOR LIGHTS-OUT PRODUCTION N R PULLERS ESILY UTOMTE NY N LTHE FOR LIGHTS-OUT PRODUTION ROYL OMPT N R PULLERS utomate ny N Lathe q Great for use with small N lathes compact design minimizes tool interference. q Very easy to setup

More information

Precision made in Germany. As per DIN The heart of a system, versatile and expandable.

Precision made in Germany. As per DIN The heart of a system, versatile and expandable. 1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

Chapter 23: Machining Processes: Turning and Hole Making

Chapter 23: Machining Processes: Turning and Hole Making Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Turning and Hole Making Chapter Outline 1. Introduction 2. The Turning Process 3. Lathes and Lathe Operations

More information

WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES

WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With

More information

THE PROCESS OF PRODUCING P-5678 SPRING PINS FOR NORTHLAND TRUCKS

THE PROCESS OF PRODUCING P-5678 SPRING PINS FOR NORTHLAND TRUCKS THE PROCESS OF PRODUCING P-5678 SPRING PINS FOR NORTHLAND TRUCKS Prepared For Don Klepp, English 132 Instructor Okanagan University College By Richard Pelletier Mechanical Engineering Technology 1 Okanagan

More information

Precision Chucks for Improved Accuracy and Increased Productivity

Precision Chucks for Improved Accuracy and Increased Productivity Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open

More information

CNC BAR PULLERS EASILY AUTOMATE ANY CNC LATHE FOR LIGHTS-OUT PRODUCTION

CNC BAR PULLERS EASILY AUTOMATE ANY CNC LATHE FOR LIGHTS-OUT PRODUCTION N R PULLERS ESILY UTOMTE NY N LTHE FOR LIGHTS-OUT PRODUTION ROYL OMPT N R PULLERS utomate ny N Lathe ll parts subject to wear are hardened for strength and durability. q Great for use with small N lathes

More information

New Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible

New Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...

More information

VSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine

VSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine TM engine rebuilding equipment balancing block boring cleaning crankshaft cylinder head flywheel grinders honing motorcycle small engine surfacing center center versatility New capabilities Tooling adapters

More information

COMPACT CNC BAR PULLERS Automate Any CNC Lathe

COMPACT CNC BAR PULLERS Automate Any CNC Lathe N ar Pullers OMPT N R PULLERS utomate ny N Lathe Great for use with small N lathes compact design minimizes tool interference. Very easy to setup and use. Unit can pull round, square, and hex stock. Flexible

More information

SPINDLE TOOLING FOR MANUAL & CNC LATHES

SPINDLE TOOLING FOR MANUAL & CNC LATHES SPINDLE TOOLING FOR MANUAL & CNC LATHES TURNING MILLING GRINDING WORKHOLDING Pioneers of Spindle Tooling Quality and Process Control Value in Workholding Team up with the Hardinge Workholding Group to

More information

HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG

HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG 6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,

More information

PRAZI USA. Model PR-3900 Owners Manual. Please read this manual in its entirety before using the PRAZI ChestMate.

PRAZI USA. Model PR-3900 Owners Manual. Please read this manual in its entirety before using the PRAZI ChestMate. PRAZI USA Model PR-3900 Owners Manual Please read this manual in its entirety before using the PRAZI ChestMate. PRAZI USA 214 Rear South Meadow Rd (800)-262-0211 Plymouth MA, 02360 www.praziusa.com ChestMate

More information

Precision Milling Machine Vises. (Inch) (Inch) (Inch) Toolmaker s Vises. Jaw Depth

Precision Milling Machine Vises. (Inch) (Inch) (Inch) Toolmaker s Vises. Jaw Depth Precision Milling Machine Vises Vises & Accessories A B C D E F G H I J K L M N 17.01 4.63 9.25 6 2.05 18.74 3.87 2.87 1.50 1.75 4.84 0.69 7.5 0.71 79 277064 17.20 4.63 8.75 6 2.05 18.94 3.87 2.87 1.50

More information

March weeks. surcharge for

March weeks. surcharge for March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not

More information

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable

More information

.00025" PER CLICK. As you turn the adjustment screw you should be able to feel a click. Each click will change the part diameter.00025".

.00025 PER CLICK. As you turn the adjustment screw you should be able to feel a click. Each click will change the part diameter.00025. ULTRA PRECISION DIAMETER ADJUSTMENT.00025" PER CLICK The ultra precision diameter adjustment is extremely accurate, as well as, quick and easy to use. The adjustment mechanism is spring loaded to take

More information

Build a Drill Press Vise

Build a Drill Press Vise Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe

More information

STEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX

STEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB   FAX STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed

More information

The ultimate affordability in valve seat machining

The ultimate affordability in valve seat machining The ultimate affordability in valve seat machining SG7 cylinder head seat & guide machine Light Weight Work Head The SG7 has a light weight work head for extremely fast and accurate centering for the ultimate

More information

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing

More information

Other Lathe Operations

Other Lathe Operations Chapter 15 Other Lathe Operations LEARNING OBJECTIVES After studying this chapter, students will be able to: Safely set up and operate a lathe using various work-holding devices. Properly set up steady

More information

8.10 Drill Grinding Device

8.10 Drill Grinding Device 8.10 Drill Grinding Device Special Accessories 1. Introduction Device can accurately grind precision drill and tools, this drill grinding machine system consists of a motor and grinding wheel head composed

More information

THREAD CUTTING & FORMING

THREAD CUTTING & FORMING THREAD CUTTING & FORMING Threading, Thread Cutting and Thread Rolling: Machining Threads on External Diameters (shafts) Tapping: Machining Threads on Internal Diameters (holes) Size: Watch to 10 shafts

More information

ICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)

ICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920) ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com COMBINED DRILL & COUNTERSINKS COBALT PLAIN TYPE...5 BELL

More information

The new generation with system accessories. Made in Germany!

The new generation with system accessories. Made in Germany! 1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening

More information

COFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock

COFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock Deburring Tool for Elliptical or Contoured Surfaces increased performance from stock Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 The HEULE COFA deburring tool removes burrs from the front and

More information

Hardinge. The Hardinge Advantage. Hardinge Inc. One Hardinge Drive Elmira, NY USA. Worldwide Leader in Super-Precision

Hardinge. The Hardinge Advantage. Hardinge Inc. One Hardinge Drive Elmira, NY USA. Worldwide Leader in Super-Precision The Hardinge Advantage Worldwide Leader in Super-Precision Hardinge Inc. One Hardinge Drive Elmira, NY 14902-1507 USA Phone: 800-843-8801 Fax: 607-734-3886 Internet: www.hardinge.com Hardinge Inc., 1997

More information

Portable Milling Machines

Portable Milling Machines Versatile and Accurate Mill X Y Z W Diameter Shank 18 1.0 Z X 57. 5. 30 1.0 Z X 36 76 5. 30 6 6 6.0 6Z X 36 76 36 8 8 8.0 8Z X 91. 6 8 8 8.0 8Z X 7 165.6 80 16 16 16.0 16Z X 96 03 06. 06. 06. The new TCM

More information

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL.

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. Drilling Machine Drilling Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. The machine used for drilling is called drilling machine. The drilling

More information

Inside Micrometers and End Measuring Rods

Inside Micrometers and End Measuring Rods J.W. DONCHIN CO. 4841-43 W. Chicago Ave Chicago, IL 60651-3224 Ph: 773-261-2182 Fax: 773-261-2867 sales@jwdonchin.com www.jwdonchin.com Inside Micrometers and End Measuring Rods PG DESCRIPTION SERIES RANGE

More information

BSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool

BSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant

More information

CUTTER BLOCKS. Knives HSS & Carbide Tipped

CUTTER BLOCKS. Knives HSS & Carbide Tipped C CUTTER BLOCKS Knives HSS & Carbide Tipped 185 UNIVERSAL TOOLHEAD High tensile steel body toolhead with 2 teeth Supplied with 12, 24 or 36 sets of solid HSS knives Custom profiled knives available on

More information

COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004

COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the

More information

The Speed of Live and the Accuracy of Fixed

The Speed of Live and the Accuracy of Fixed The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.

More information

TOOLS AND INSTALLATION

TOOLS AND INSTALLATION TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and

More information

Tooling For Haas Lathes

Tooling For Haas Lathes Tooling For Haas Lathes Performance measured by you Visit Command Tooling Systems on line catalog for Command standard product part file downloads, up-to-date stock levels and our list price instant quoting

More information