Coated Steel. Coated Steel
|
|
- Janis Beasley
- 6 years ago
- Views:
Transcription
1 Coated Steel 3-1
2 Coated Steel Hot-Dip Galvanized Steel (GI,55% Al-Zn,5% Al-Zn) 3-3 Coil 3-6 Strip 3-10 Sheet 3-10 Pre-Painted Hot-Dip Galvanized Steel (PPGI,PPGL,PPGF) 3-11 Coil 3-13 Strip 3-17 Sheet 3-17 Electronic Galvanized Steel (EG) 3-18 Coil
3 Hot-Dip Galvanized Steel (GI/GL) 3-3
4 Producing Flowchart Application Deck C.Z Purlin Ducting Scaffolding Silos Automotive Parts Wire Cases Computer Cases Vending Machines 3-4
5 Characteristics and Comparison of Different Surface Aspects and Coating Type Characteristics Product Production Method Characteristics Application Most Suitable Suitable Regular Spangle Spangle produced by crystallization solidification Good adhesion and weathering resistance. Guardrails, ventilation ducts, gutters and down spouts. Shutter doors, gutters and down spouts, ceiling suspension bars. Zinc Coated Minimized (Zero) Spangle Extra Smooth Surface Blow zinc powder or atomized fog onto the molten zinc layer acts as nucleation sites or control the composition of pot for the minimized spangle. Temper rolling produces an extra smooth surface. Uniform surface and attractive finish after painting. Uniform surface and attractive finish after painting. Pre-paint and post paint applications, gutters and down spouts, ceiling suspension bars, shutter door rails. Gutter and down spouts, auto parts, electrical appliances, refrigerator appliances, for pre-paint Automotive parts, guardrails, ventilation ducts. Automotive parts guardrails, ventilation ducts. Galvannealed The galvanized strip is heated to alloy the zinc layer. The zinc-iron alloy coating layer provides good weld ability as well as good corrosion resistance Shutter doors, signs, automotive parts, vending machines, refrigerators, washing machines, showcases. Metal furniture, casing for electrical equipment. 5% Al-Zn Coated Galfan The Coating alloy comprises about 5% aluminum, mischmetals and balanced zinc. Good formability excellent paint ability and superior corrosion resistance. C.Z purlin, gutters, door frame, auto parts, vending machines, guardrails. Washing machines, for pre-painting applications 55% Al-Zn Coated Galvalume The coating alloy comprises about 55% Al, 1.5% Si and balanced zinc. Uniform and pleasing appearance, good adhesion included. Gutters, auto parts, electrical appliances, vending machines, refrigerators, ovens, for pre-paint. Showcases, washing machines, purlin. 3-5
6 Surface Patterns Available Size Hot-Dip Galvanized Steel Coils (Zinc Coated) W(mm) T.(mm) Acceptable Order Range for Cold rolled Base Steel Acceptable Order Range for Hot Rolled Base Steel Subject to Prior Negotiation 3-6
7 Hot-Dip Galfan Steel Coils (5% Al-Zn Coated) W(mm) T.(mm) Acceptable Order Range for Cold rolled Base Steel Acceptable Order Range for Hot Rolled Base Steel Hot-Dip Galvalume Steel Coils (55% Al-Zn Coated) W(mm) T.(mm) Acceptable Order Range for Cold rolled Base Steel Subject to Prior Negotiation 3-7
8 Product Specifications Hot-Dip Galvanized Steel Coils (Zinc Coated) Coating Mass Specifications Thickness of Base Steel (mm) Regular Spangle Minimized (Zero) Spangle Galvannealed Surface Finish Surface Treatment Coating Thickness SGCC SGC SGCH Z08,Z12,Z18,Z20,Z22,Z25,Z27, Z35,Z45 Z08,Z12,Z18,Z20,Z22,Z25,Z27, Z35 JIS G ASTM A653M / A924M 1998 SGCD1 SGCD F10,F12,F18 Z08 Z27 Z08 Z27 SGCD SGHC SGH Z10 Z45 Z18 Z35 CS Type FS Type A B C A B SS Grade SS Grade Z120,Z180,Z275,Z350, Z450 Z120,Z180,Z275,Z350 ZF120,ZF180 Regular Spangle, Minimized Spangle, Extra Smooth and Galvannealed Chromating Treatment, Oiled or Resin Coated (Anti Finger Print) Min. Single Side coating Thickness: 50 g/ m2 Max. Single Side coating Thickness: 225 g/ m2 DDS EDDS Z120 Z180 Z275 Z120 Z180 Z275 Remarks 1. Tolerance for thickness, width, flatness and so on can conform to the requirements of JIS G3302 or ASTM A653M / A924M. 2. All products with thickness 2.0mm and under can be skin passed. 3. The specification for thicknesses under 1.6mm for hot-rolled base metal according to JIS G3302 will be the same as for thickness 1.6mm and over. 4. Coil inside diameters can be either 508mm or 610mm, maximum coil outside diameter is 2000mm. Weight of a single coil can be from 5 to 30 metric tons. 5. Please contact Yieh Corp. for Special specifications. 6. The specification of ASTM such as A653M, A792M, A875M / A924M and etc. have been updated to the latest revisions. 3-8
9 Hot-Dip Galvafan / Galvalume Steel Coils (Al-Zn Coated) Product Name Specifications Galfan (5% Al-Zn Coated Steel Coil) JIS G ASTM A875M 1997 ASTM A924M 1997 SZAHC SZACC Comm Form Struct Struct SZAHC SZAC -ercial -ing -ural -ural Steel Steel Steel Steel Type Type Grade Grade A A B B 255 C C Galvalume (55% Al-Zn Coated Steel Coil) JIS G ASTM A792M 1997 ASTM A924M 1997 SGLCC SGLCD CS SS SGLC Type Grade 400 A B C FS Thickness of Base Steel (mm) Coating Mass Surface Finish Surface Treatment Coating Thickness Y08 Y10 Y12 Y18 Y20 Y22 Y25 Y27 Y35 Y ZGF 90 ZGF135 ZGF180 ZGF225 ZGF275 ZGF350 ZGF450 Regular Spangle, Minimized Spangle AZ 90 AZ120 AZ150 AZ Regular Spangle Chromating Treatment, Oiled or Resin Coated (Anti Finger Print) Min. Single Side coating Thickness: 50 g/ m2 Max. Single Side coating Thickness: 225 g/ m2 AZ150 AZ165 AZ Remarks 1. Tolerance for thickness, width, flatness and so on can conform to the requirements of JIS G3302 or ASTM A653M / A924M. 2. All products with thickness 2.0mm and under can be skin passed. 3. The specification for thicknesses under 1.6mm for hot-rolled base metal according to JIS G3302 will be the same as for thickness 1.6mm and over. 4. Coil inside diameters can be either 508mm or 610mm, maximum coil outside diameter is 2000mm. Weight of a single coil can be from 5 to 30 metric tons. 5. Please contact Yieh Corp. for Special specifications. 6. The specification of ASTM such as A653M, A792M, A875M / A924M and etc. have been updated to the latest revisions. 3-9
10 Available Size of Hot-Dip Galvanized Steel Strip Type Coating Mass Thickness (mm) Width (mm) CGI Z08 ~ Z ~ ~ 1824 HGI Z08 ~ Z ~ ~1824 Available Size of Hot-Dip Galvanized Steel Sheet Type Coating Mass Thickness (mm) Width (mm) CGI Z08 ~ Z ~ ~ 1824 HGI Z08 ~ Z ~ ~
11 Pre-Painted Hot-Dip Galvanized Steel (PPGI/PPGL) 3-11
12 Producing Flowchart Application Ceiling Suspension Bars Factory Building PPGI Steel Roof Tiles Roofing Surface Panel Rolling Door Shutter Partitions Electrical Appliances Container Wall 3-12
13 Available Size Pre-painted Hot-Dip Galvanized Steel Coils W(mm) T.(mm) Pre-painted Hot-Dip Galfan Steel Coils W(mm) T.(mm)
14 Pre-painted Hot-Dip Galvalume Steel Coils W(mm) T.(mm) Coat 2 Bake System 3-14
15 Product Specifications Product Type 1. Pre-Painted Hot-Dip Galvanized Steel Coil (PPGI) 2. Pre-Painted Hop-Dip 5% Al-Zn Coated Steel coil (PPGF) 3. Pre-Painted Hop-Dip 55% Al-Zn Coated Steel Coil (PPGL) Coating Type 1. Polyester 2. Silicone Modified Polyester 3. Acrylic 4. PVDF JIS G3312 (1994) JIS G3318 (1994) JIS G3322 (1994) Product Spec. CGCC CGCH CGCD1 CGC340 CGC400 CGC490 CGC570 CZACC CZACH CZACD1 CZAC340 CZAC400 CZAC440 CZAC490 CZAC570 CGLCC CGLCD CGLC400 CGLC440 CGLC490 CGLC570 JIS G3302 (1998) ASTM (1998) JIS G3317 (1994) Substrate Spec. SGCC SGCH SGCD1 SGC340 SGC400 SGC440 SGC490 SGC570 A653M-96 CS.FS.SS.DDS. EDDS. Grade SZACC SZACH SZACH1 SZAC340 SZAC400 SZAC440 SZAC490 SZAC570 Coating Designation JIS G3302 Z10 Z12 Z18 Z20 Z22 Z25 Z27 Z35 Z45 ASTM A653M-96 Z120 Z180 Z275 Z350 Z450 JIS G3317 Y108 Y10 Y12 Y18 Y20 Y22 Y25 Y27 Coating Thickness Primer: PU or Epoxy 5um Top Coat: 15-25um Back Coat: PE or Epoxy 5-12um Primer: PU or Epoxy 5um Top Coat: 18-22um Back Coat: PE or Epoxy 5-12um ASTM (1996) A755 JIS G3321 (1998) SGLCC SGLC400 SGLC440 SGLC490 SGLC570 JIS G3321 AZ90 AZ120 AZ150 AZ170 ASTM (1997) A875M CS. TYPE A.B.C FS. TYPE A.B SS Grade ASTM A875M ZGF90 ZGF135 ZGF180 ZGF225 ZGF275 ASTM (1997) A792M CS. TYPE A.B.C FS. SS Grade ASTM A792M AZ150 AZ165 AZ180 ASTM (1996) A879 CQ, DQ, DQSK, SQ, HSLAQ ASTM A879 00,20,40,60,70, 90,98 JIS G3313 (1998) SECC SECD SECE JIS G3313 E8,R16,E24,E32, E40 ASTM (1998) A591 CQ, DQ, CS, HSLAQ ASTM A591 A, B, C Remark: 1. Protective Film can be applied 2. The ASTM standards presented here adopt the imperial system (The equivalent metric system is marked by the M after the specification number, such as A755M and A792M) 3. Coating Thickness is for reference only. 3-15
16 Standard Color Pre-painted Hot-Dip Galvanized Steel Coils 3-16
17 Available Size of Pre-Painted Hot-Dip Galvanized Steel Strip Coating Thickness Thickness (mm) Width (mm) Top: 5 ~ 12 um Base: 5 ~ 12 um 0.2 ~ ~1500 Available Size of Pre-Painted Hot-Dip Galvanized Steel Sheet Coating Thickness Thickness (mm) Width (mm) Top: 5 ~ 12 um Base: 5 ~ 12 um 0.2 ~ ~
18 Electro Galvanized Steel (EGI) 3-18
19 Producing Flowchart Product Specification Applications JIS Usage Commercial Quality JIS G3313 SECC Furniture, Computer case, Electronic parts, Electrical equipment Drawing Quality JIS G3313 SECD Automobile Deep Drawing Quality JIS G3313 SECE Automobile 3-19
20 Surface Treatment Type of Surface Treatment Chromate Treatment Phosphate Treatment Oiling Symbol C P O Available Size Thickness 0.3 ~ 1.6mm Width 850 ~ 1580mm Coating Weight 10-30g/m (single side) Max. Coil Weight 20 MT 3-20
GALVANIZED STEEL COIL 1.1 galvanized steel coil
GALVANIZED STEEL COIL 1.1 galvanized steel coil Galvanized steel coils product name thickness width zinc coating standard material spangle surface treatment packing payment min order 0.135mm-4.0mm 600mm-1500mm762mm,914mm,1000mm,1200mm,1219mm,1250mm
More informationShanghai Metal Corporation. The Business of Metallic Coated Steel. SHANGHAI METAL CORPORATION
Shanghai Metal Corporation SHANGHAI METAL CORPORATION SMC is the leading manufacturer and supplier of metals, building materials, and machinery for building projects throughout the world. From the acquisition
More informationPANEL FABRICATION PROCESS
PANEL FABRICATION PROCESS PANEL FABRICATION MACHINE SPECIFICATIONS- FEATURES AND USAGE Features: Fabrication machine has the advantage of having a beautiful appearance, design, reliable quality, easy operating
More informationisd dunaferr Product catalogue
isd dunaferr Product catalogue HOT-DIP GALVANIZED PRODUCTS The base material of hot-dip galvanizing is cold rolled wide coil. Metal coating is performed in course of continuous hot-dip galvanizing Sendzimir
More informationProduct-Category Rules (PCR) for Preparing an Environmental Product Declaration (EPD) for. Hot-Dip Metallic Coated Steel Coils/
Product-Category Rules (PCR) for Preparing an Environmental Product Declaration (EPD) for Hot-Dip Metallic Coated Steel Coils/ Prepainted Hot-Dip Metallic Coated Steel Coils PCR 2010:1.0 Yieh Phui Enterprise
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationContent. Hot-dip galvanized narrow strip. Areas of application. Product information
Steel Hot-dip galvanized narrow strip Product information Issue: October 2016, version 0 Areas of application Hot-dip galvanized narrow strip from thyssenkrupp combines the advantages of batch galvanizing
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationGUIDELINE SPECIFICATIONS
GUIDELINE SPECIFICATIONS GORDON MILLENNIUM DECORATIVE METAL COLUMN COVERS DIVISION 05 7500 or DIVISION 09 2000 Note To Specifier: Column Covers are a finished, decorative product and should be installed
More informationVersai Evolution of Versatile Fencing
Versai Evolution of Versatile Fencing About Versai Ornamental Fencing Versai Ornamental Fencing Versai Ornamental Fencing by Fortress is the next generation in ornamental fencing. It offers a solution
More informationOHIO TURNPIKE AND INFRASTRUCTURE COMMISSION ADDENDUM NO. 1 BID INVITATION NO EIGHT (8) EACH UTILITY BODY AND POWER LIFTGATE
OHIO TURNPIKE AND INFRASTRUCTURE COMMISSION ADDENDUM NO. 1 EIGHT (8) EACH UTILITY BODY AND POWER LIFTGATE OPENING DATE: 2:00 P.M. (EASTERN TIME), OCTOBER 10, 2017 ATTENTION OF BIDDERS IS DIRECTED TO: ANSWERS
More informationSECTION HOLLOW METAL DOORS AND FRAMES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 11 13 HOLLOW METAL DOORS AND A. Non-fire-rated hollow metal doors and frames. B. Hollow metal frames for wood doors. C. Fire-rated hollow metal doors and
More informationCut Edge Protection Using Prepainted Sheet. Foreword. Section One. Introduction
Foreword Cut Edge Protection Using Prepainted Sheet The National Coil Coating Association (NCCA) would like to thank Laurie Dana, Kim Brandhorst, and Jack Knuttilla of PPG Industries, Inc. for their hard
More informationMETAL METAL
12654 - METAL 12654-1 PART ONE: GENERAL METAL 1.1 Architectural metals shall be of the best commercial quality and their various forms shall be straight and true. There shall be no scratches, scars or
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 SHEET METAL FLASHING AND TRIM PART 1 GENERAL 1.1 SUMMARY A. Section includes flashings and counterflashings, sheet metal roofing and fabricated sheet metal items, as indicated in Schedule.
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More information+91-8071678334 Shri Balaji Roofing http://www.shribalajiroofing.in/ We are counted amongst the truly integrated Manufacturer entity dealing in superior quality Industrial Products. Owing to the unique
More informationSteel & Metals Solutions
Steel & Metals Solutions COMPANY OVERVIEW.. 2 STEEL.. 3 Semi-Finished.. 3 Flat Products.. 4 Long Products.. 9 Tubular.. 14 Other steel products.. 17 METAL HARDWARE MSD.. 19 OTHER PRODUCTS.. 20 NETWORK
More informationMB Commercial High Carbon Spring Wire
MB Commercial High Carbon Spring Wire Quench & Tempered M.B Class I and Class II Spring Wire - Round Quench & Tempered Cold Rolling Quality (CRQ) MB grade wire is used extensively in applications where
More informationSECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-10 51 13 (May 2011) ------------------------- Preparing Activity: NAVFAC Superseding UFGS-10 51 13 (July 2007) UNIFIED FACILITIES GUIDE SPECIFICATIONS References are
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationWALCOOM. Walcoom Corporation GARRISON FENCE.
WALCOOM Walcoom Corporation "Galvanized steel picket fence with absolute advantage over the wrought iron & stainless steel fence." Walcoom is a professional metal fencing manufacturer. We always adhere
More informationSuggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002
Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 This suggested specification is provided as a guide to preparing a quality document calling for
More information4. Metal roof jacks at penetrations and attachments
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - SECTION 07 61 00 METAL SHINGLE ROOFING - - - - - - - - - - -
More informationfinishing top coat primer chemical treatment hot dip galvanization primer or back coat chemical treatment cold rolled steel hot dip galvanization
Pr epai nt eds t eel primer finishing top coat chemical treatment hot dip galvanization primer or back coat chemical treatment cold rolled steel hot dip galvanization 70 Marcegaglia Pre-painted steel coils,
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-08 33 13 (May 2009) Change 2-11/12 --------------------------- Preparing Activity: USACE Nontechnical Title Revision (August 2015) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number
More informationPAINT SYSTEMS USED IN THE CONSTRUCTION MARKET
BACKGROUND Technical TSB 4.1 Bulletin Construction PAINT SYSTEMS USED IN THE CONSTRUCTION MARKET BACKGROUND TBP 2005.10 The rapid expansion of the use of sheet steel in the construction market is partly
More informationHebei Tinlin Metal Products Co., Ltd.
1 User Manual This file introduce the barbed wire series, technical data, specifications, price account, packing, installation and barbed wire history. 2 Barbed wire brief introduction and types Barbed
More informationUP139 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 AN
UP39 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 ANGLE BRACKET TUBE BRACKET TUBE WARNING LABEL PLATE HARDWARE
More informationSPECIFICATION FOR PAINTING ON GALVANIZED SURFACES BY WET or ELECTROSTATIC POWDER PAINTING
CHIEF CHEMIST DEPT. PAGE No. 1 of 7 SPECIFICATION FOR PAINTING ON GALVANIZED SURFACES BY WET or ELECTROSTATIC POWDER PAINTING 1. SCOPE This specification covers the requirements for painting of steel surfaces
More informationStreet Design. MALL seating. Mall bench product details. Mall technical specification. Mall accessories. Mall material finishes
Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us MALL seating As UK based, designers and manufacturers, Street Design can manufacture
More information2K weather resistance clear coat A850
Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance
More informationUP133 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CL
UP33 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL TRIANGLE
More informationCOMPATIBILITY OF FASTENERS
COMPATIBILITY OF FASTENERS TECHNICAL BULLETIN Vol. 4, No. 2 NOVEMBER 2011 This bulletin applies to conditions where fasteners are not provided by Metl-Span. Profiled metal roof or wall panels rely upon
More informationEAST AFRICAN STANDARD
ICS 77.140 EAST AFRICAN STANDARD Pre-painted metal coated steel sheets and coils Specification EAST AFRICAN COMMUNITY EAC 2006 First Edition 2006 Foreword Development of the East African Standards has
More informationSecurifor Polyester Coated Welded Mesh Panels
1 Scope This specification specifies requirements for panels made out of galvanised steel wires, welded and subsequently polyester coated for fencing. The panels are used for fencing, schools, public buildings,
More informationLEGACY 440 FENCING. 62 Premium Products, Premium Service... Direct to Your Door.
LEGACY 440 FENCING There are multitudes of fencing choices on the market today and each has a specific purpose. These choices are narrowed by the intended use of the fence and the choice becomes further
More informationC10 - Cold rolled steels for conventional enamelling
C10 - Cold rolled steels for conventional enamelling Enamelled steel is eminently suitable for use in the sanitary ware industry, which has very rigorous requirements with regard to hygiene and bacteriological
More informationGuardsman. Galvanized Ornamental Steel Fence Solutions
Guardsman Galvanized Ornamental Steel Fence Solutions FENCE SOLUTIONS IN ORNAMENTAL CHAIN LINK WOOD PVC ACCESS CONTROL WWW.MERCHANTSMETALS.COM 866-888-5611 Guardsman combines the traditional style and
More informationSHEET METAL FLASHING AND TRIM Christ on the Mountain
SECTION 076200 - SHEET METAL FLASHING AND TRIM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Compatibly with the bumping of flashings and trim as identified in the Membrane Roofing Section 075000.
More informationSteel Nipples. Nipples & Fittings. Black and Galvanized Steel Nipples. Black and Galvanized. Steel Nipples. 142
PRODUCT SPECIFICATIONS Welded steel pipe nipples both galvanized an dblack in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe up to 120. TECHNICAL SPECIFICATIONS Standards:
More informationStandard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing 1
Designation: A 787 05 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing This standard is issued under the fixed designation A 787; the number immediately
More informationChemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
More informationSPECIFICATION FOR PAINTING ON GALVANIZED SURFACES BY WET/ELECTROSTATIC POWDER PAINTING
CHIEF CHEMIST DEPT. PAGE No. 1 SPECIFICATION FOR PAINTING ON GALVANIZED SURFACES BY WET/ELECTROSTATIC POWDER PAINTING 1. SCOPE This specification covers the requirements for painting of steel surfaces
More informationBUREAU OF INDIAN STANDARDS. Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION
FOR BIS USE ONLY DOC:CHD 20 (1932)C December 2012 BUREAU OF INDIAN STANDARDS Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION (Not
More informationGURANTEED TECHNICAL PARTICULARS OF BACK CLAMP FOR LT CROSS ARM
Technical Specification of Back Clamp for LT Cross Arm (MS) Back clamp for LT Cross Arm made out of 50 x 6mm MS Flat suitable for 8m X 300 Kg PSC poles. After fabrication the cross arm shall be painted
More informationC. Samples for Initial Selection: Manufacturer's color charts showing the full range of colors available.
SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More information06/09/54. Theory of Rust
Theory of Rust 1 Type Of Corrosion Protections - Painting System Polyurethane Base, Epoxy Base, Oil Paint, Fluorine Base Type Of Corrosion Protections - Insulation System Fiberglass, Close cell PE 2 Type
More informationMesh Ceilings WHAT MAKES MESH UNIQUE? THE PRODUCTION PROCESS STEP 2. STEP 1 Sheets or coils of metal are fed into the expanding machine.
Mesh Ceilings 37 Mesh Ceilings The Burgess By System' range of Mesh Ceilings will provide a rustic and industrial look to complement your interior designs. Choose from an almost infinite number of styles,
More informationNATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA
Translated English of Chinese Standard: GB/T18230.1-2000 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB/T
More informationLAYERS OF PROTECTION. Choose quality metal for your next project.
S OF PROTECTION Choose quality metal for your next project. Learn about the layers of protection that make up a quality metal panel. Manufacturers offer panels that look the same, but can vary widely in
More informationANPING QINGHE METAL MESH CO LTD QING HE
engaged in the manufacture and development of welded wire mesh & panels products,with different material and treatment, for a wide range of application. Our major products include: Galvanized, PVC Coated
More informationSHELDON Versatile seating
UK street furniture designers & manufacturers As UK based, designers and manufacturers, Street Design can manufacture and supply Sheldon seating to suit your specific requirements. Sheldon versatile seating
More informationEpoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.
Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining
More informationPWI PERFECT WIRE INDUSTRIES
Welcome to PWI PERFECT WIRE INDUSTRIES is manufacturer & exporter of various types of wires, such as Spring Steel Wire, High Carbon Wire, G. I. Wire, Rope Wire, Round Stitching Wire, Flat Stitching Wire,
More informationINDUSTRIAL METAL COATINGS SYSTEM GUIDE
METAL SYSTEMS General Purpose Metal Systems- The following systems are recommended for general industrial interior and exterior applications. Such applications include office furniture, shelving, electrical
More informationSpecifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F 1667-05 Table 15 Type 1, Style 10 - Common Nails Size Length
More information1.1 RELATED DOCUMENTS
SECTION 050505 -BEVEL RAIL ENDS PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including General and Supplementary Conditions and Division 01 Specification Sections
More informationHARDLOCK NUT RIM & HARDLOCK NUT BASIC
1 Clamp Load [kn] FEATURES OF HARDLOCK NUT Reusable without reduction in performance! Full torque management and completely fastened even with ZERO (0) clamp load! Available in various materials and surface
More informationMH Series Mitered Frames shall be as manufactured or furnished by Republic Doors and Frames, McKenzie, Tennessee
drywall frames - mh series/mitered SHEET NO. 202 MH Series Mitered Frames shall be as manufactured or furnished by Republic Doors and Frames, McKenzie, Tennessee 38201. Profile - Made for two basic door
More informationPROJECT LOCATION SECTION PREFINISHED STEEL DOOR FRAMES
SECTION 08 1213.17 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Prefinished steel door frames. B. [Sidelites] [, borrowed lites] [, and transom] assemblies. 1.02 RELATED REQUIREMENTS A. Section 06 2000 Finish
More informationOrnamental Fencing Pictures & Information
Ornamental Fencing Pictures & Information At Leading Edge Fences, we specialize in the installation of all types of ornamental iron and offer a wide range of styles to suit all your needs. We recommend
More informationChromadek coil tensioned during the paint process on the paint line at ArcelorMittal Vanderbijlpark Works.
Formable Strong Versatile Durable and Aesthetically Pleasing Chromadek coil tensioned during the paint process on the paint line at ArcelorMittal Vanderbijlpark Works. Formability Steel is generally
More informationRAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION
Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied
More informationStreet Design. BUCKLAND seating. Buckland bench product details. Buckland technical specification. Buckland accessories. Buckland material finishes
Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us BUCKLAND seating As UK based, designers and manufacturers, Street Design can manufacture
More information1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards.
PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. B. See Division 5 Section "Pipe and Tube Railings"
More informationHex Cap Screws Coarse & Fine Thread
INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw
More informationTesting. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.
907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing
More informationpaint for coil coating
paint for coil coating SUSTAINABLE CHEMISTRY DEDICATED TO INDUSTRIAL PAINTING. Environmentally friendly. In the Paint Division of Condoroil Chemical, sustainability is not only a word, it is a life style.
More informationHeckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION SECTION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL
Heckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL SECTION 04085 1.1 SECTION INCLUDES NOTE: Delete items below not required for project.
More informationEngineering Test Report
Engineering Test Report Thermal Diffusion Galvanizing Report Poleline Hardware 02/01/2018 Allied Bolt s Thermal Diffusion Galvanizing Allied Bolt announces the launch of Thermal Diffusion Galvanized Poleline
More informationSECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Formed roof drainage sheet metal fabrications. 2. Formed low-slope roof sheet metal fabrications. 1.2 SUBMITTALS A. Shop Drawings: Show
More informationGovernment Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.
Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationPanel fencing system 2D 6/5/6
tel.: +8 7 2 2 mobile: +8 09 9 e-mail: kontakt@ Panel fencing system 2D // fencing panels tel.: +8 7 2 2 mobile: +8 09 9 e-mail: kontakt@ type 2D H H Panel height 0 80 00 20 0 0 80 200 220 20 Horizontal
More informationADDING VALUE TO STEEL COMPANY PROFILE.
ADDING VALUE TO STEEL COMPANY PROFILE www.danagroups.com VISION OUR PRODUCTS We aspire to be the global steel industry benchmark for the worlds s most reliable and innovative steel manufacturer, service
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number ISO 10684:2004(E) ISO 2004 PDF
More informationBike Locker Model DBL1 & DBL2
Bike Locker Model DBL1 & DBL2 DBL1 & DBL2 are constructed of 99% recycled steel and is available in 20 standard powder coat colors or a galvanized finish. DBL1 & DBL2 store 1 or 2 bikes effortlessly and
More informationAnnie Tel: MSN: All chain-link fences aren't the same
Attractive, versatile and creative - a chain-link fence system can be an excellent choice. With the right fence you can expect years of protection, privacy and value. But as with any investment, it pays
More informationROUND STEEL POLE STRAIGHT
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 7 ROUND STEEL POLE SPECIFICATIONS: Pole Shaft The pole shaft is fabricated from hot rolled steel tubing of onepiece construction with a
More informationWanco Electric & Machinery Pte Ltd. Cable Management Systems. Cable Trunking
Wanco Electric & Machinery Pte Ltd Cable Management Systems Cable Trunking About Wanco Wanco Electric and Machinery Pte Ltd is the leader in electrical construction materials. Through continued support
More information50948-RHN Putney. 06 January This document includes: Aluminium strip/ sheet coverings/ flashings 1. Code Section Revision Dated
50948-RHN Putney 06 January 2018 This document includes: Code Section Revision Dated H72 Aluminium strip/ sheet coverings/ flashings 1 Table of Contents Title H72 Aluminium strip/ sheet coverings/ flashings
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationPORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationAS/NZS 1214:2016 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1214:2016
(ISO 10684:2004, MOD) Australian/New Zealand Standard Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1214:2016 This joint Australian/New Zealand standard was
More informationApplication Guide for Jotun Primax Diamond Powder Coatings
for Jotun Primax Diamond Application Guide for Jotun Primax Diamond Powder Coatings Date of Last Revision: August 2017 Page 1 of 7 Contents 1.0 Introduction 3 2.0 General overview 3 3.0 Safety Considerations..3
More informationSECTION CABLE TRAYS
SECTION 16139 CABLE TRAYS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationHILAND TRAY FORM AND FUNCTION MATERIAL SPECIFICATIONS DESIGN GUIDE ROOFING I WALLING
HILAND TRAY ROOFING I WALLING DESIGN GUIDE FORM AND FUNCTION Hiland Tray is a modern 455mm wide tray roofing and walling system, roll formed onsite with a mobile roll forming facility in long single lengths
More informationAppliances. Barbecue Grills. Plumbingware. Architectural
ENAMELING STEEL S Appliances Barbecue Grills Plumbingware Architectural AK Steel manufactures three enameled products to meet a variety of porcelain enameling and formability requirements: UNIVIT, VIT-PLUS,
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationCrowdTuff Flat Top Pedestrian Barrier Fencing
Product outline As part of our CrowdTuff powder coated tubular steel fencing range we manufacture a Flat Top style for pedestrian barrier and safety fencing applications. This range of tubular fencing
More informationRR-F-191/1D 14 May SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET
14 May 1990 ----------- SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET FENCING, WIRE AND POST METAL (CHAIN-LINK FENCE FABRIC) (DETAIL SPECIFICATION) This Federal Specification is approved
More informationSecure-Weld & Secure-Weld Plus
Secure-Weld & Secure-Weld Plus Welded Ornamental Steel Fence Solutions FNC SOLUIONS IN ORNNL CHIN LINK WOOD PVC CCSS CONROL WWW.RCHNSLS.CO 866-888-5611 SCUR-WLD & SCUR-WLD PLUS he Secure-Weld and Secure-Weld
More informationUP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationMetroll. Purlins & Girts. C Section Purlins. C Section Purlins are manufactured from Galvaspan steel and are roll formed into C Section.
C Section Purlins C Section Purlins are manufactured from Galvaspan steel and are roll formed into C Section. Metroll C Section Purlins are recommended for simple, non-continuous span construction. Structural
More informationCYCL E STAT IO N. High Capacity
CYCL E STAT IO N High Capacity The Dero Cycle Station provides high-capacity, covered bike parking for bicycle commuters. With a high roof and open platform, the Dero Cycle Station allows bike corrals,
More information