Assembly InstrUctions
|
|
- Roy Merritt
- 6 years ago
- Views:
Transcription
1 assembly video now available online! Assembly InstrUctions The Penthouse Coop how egg-citing!
2 Getting Started: Requirements & Tips 1 2 Put a Phillips head bit (Size: PH2) on a power drill. Ensure your bit fits nicely into the screws. We have provided one if you don t have one. 3 Assemble the hutch on flat ground and move into position once completed, then attach the run. 4 Save Yourself Some Stress UNPACK ALL THE BOXES COMPLETELY and line up all the bags of hardware in order so you can easily grab the bolts and screws during assembly. 6 You will need to paint your chicken coop and make sure you repaint every 3 years to keep it in top condition. Some locations in Australia may require more regular coats due to the harsh environment. You must paint both sides of every panel and we recommend you do this PRIOR TO ASSEMBLY for the best finish. We recommend Dulux Weathershield Exterior Paint. If you have chosen to oil your coop you must use Intergrain Ultradeck Natural colour. No other oil gives the necessary finish. Re-coat annually. Need some help? Allow yourself around 2 hours so you don t rush and make mistakes. 5 Assembling the coop is a 2-person job, Each piece of the coop is not heavy, and is easily supported by one person, but the coop s overall size means you ll need an extra pair of hands! M R U EA ST D! 7 Each piece has a corresponding number, as shown in the instructions. The number is printed somewhere on the piece itself. Login to the customer portal at or phone
3 M R U EA ST D! Getting Started: Requirements & Tips 8 When screwing the pieces together, it s easier if someone is applying pressure to the panels. Remember, it is best to screw them in slowly and steadily. 10 If you find you have leftover hardware, don t worry! There are spares for backups. 12 You may find a step ladder handy for attaching the roof. Need some help? 9 A good tactic when working in pairs is for one person to go ahead and rest the screws in the pre-drilled holes so that the other person can quickly and easily drill them in later. 11 Many hands make light work! If you re having trouble fitting some pieces together, try swapping and changing the pieces about a few jiggles and flips and you ll find they fit! 13 Please make sure you login to your online customer portal at Here you will find all your essential guides for getting started and exclusive video content on keeping pet chickens. Your secret password is happyhens. Login to the customer portal at or phone
4 What s Inside Your Boxes Screws A B C D E F G X 18 Pcs X 47 Pcs X 16 Pcs X 31 Pcs X Pcs X 4 Pcs X 6 Pcs Bolts & Nuts I J K L X 4 Pcs X 4 Pcs X 4 Pcs X 4 Pcs 36 As you have probably painted your coop, this page will be helpful in identifying each panel by shape instead of number! 37 4
5 What s Inside Your Boxes Hutch Chimney Nesting Box Hutch Run The Penthouse (Back View) Hutch Chimney Run 36 Nesting Box 5
6 StEp 1 StEp 2 34 Let s start with assembling the chimney. Piece 5 slots alongside Piece 7 on your right hand side, with Piece 4 slotting in on your left hand side. Assemble pieces together using the D screws (x4) into the pre-drilled holes provided. Lie Piece 3 down on the ground, with the window handle side facing down. Attach what you made in Step 1 to the top of the piece to form all sides of the chimney. Screw D screws into the holes provided on each side of the chimney. Make sure you orientate the panels correctly! 6
7 StEp 3 StEp 4 1/4 of the way! Slot Piece 1 onto your right hand side of Piece 3. Slot Piece 2 onto your left hand side of Piece 3. With your screwdriver drill 2 L bolts on each side, as shown in the diagram (one up the top, one near the base). Ensure piece 1 & 2 is positioned so the corner that has a notch cut out is aligned like the diagram. The chimney can now be attached to the wall of the hutch piece 17. Attach Piece 17 (it s a pentagon shape with a large square cut out don t confuse it with Piece 19!) to your chimney structure as seen in the diagram, using 4 I bolts two on either side. c c Remember to watch the assembly video in your online customer portal! Fit piece 10 at the base of your chimney there is a gap which it simply slots into. Attach with a C screw (x2) on each side. 7
8 StEp 5 StEp 6 You will see there are now two gaps on either side of the chimney. This is where pieces 8 & 9 will fit to form a small roof. Place piece 8 on your right hand side of the chimney, and piece 9 on your left hand side. Screw 2 D screws in on each piece as shown in the diagram. You may have to turn the pieces and wiggle them around a bit until you find the right configuration then they will slot in nicely. See video. It s time to finish the chimney! Fit piece 6 (the chimney cap) on top of the chimney, wiggling it around until it slides down. Using D screws, screw two in on either side as shown in the diagram. Voila! That s one section complete It s time to build the nesting boxes! Stand Piece 13, the back of the nesting box, vertically so it forms an L shape with Piece 14. Next attach Piece 11 to your left hand side of the nesting box, and Piece 12 attaches to your right hand side. With the top of Piece 11 & 12, make sure the slope of the wood is going upwards, not downwards. Screw J bolts in two on each side as shown in the diagram. 13 Tip: 16 (nesting box dividers) and pieces 35 (removable cleaning trays) are simply inserted into place. You might like to leave doing this until the end so they don t wobble around during the rest of assembly. 8
9 1/2 of StEp 7 the way! StEp 8 It s time to attach the nesting boxes to one side of the hutch. It s a good idea to rest the nesting box on its back, and then rest Piece 21 on top, ensuring the edge of the nesting boxes line up with the rectangular gap. Insert in K bolts two in on either side and tighten. Get ready to collect your fresh eggs from the nesting box! Tip: A 10mm spanner is helpful to hold the nuts whilst tightening the bolts. (If you don t have a 10mm spanner, then pliers will also do the trick). Begin this step with attaching piece 37 to piece 18 with C screws. Continue with attaching piece 19 to piece 20 using B screws. Attach piece 21 to piece 19 using B screws, forming a stable U shape. Attach piece 18 and screw in one side only. Attach piece 17 and screw in on the same side. Once fitted, screw in remaining screws. Attach the door handle (piece 34) to piece 18. Finally, attach Piece 21 to the inner side of Piece c 9
10 StEp 9 StEp 10 x 4pcs Put pieces 26 (x2) into the coop as seen in the diagram (they are small perches). Slide Piece 22 in the small gap underneath the chimney side as shown in the diagram. Piece 23 is the coop s handles. You will see there are two large holes where the dowels will slide in to attach it in place. Find all 3 perches, 27 and rest them in the slots provided, as shown in the diagram. Put Piece 15 on top of the nesting box (it s the lid). Screw 3 A screws on both sides as shown by the diagram. Before screwing in the hinges, check that the nesting box latch is lined up. Make sure the lid is able to open and close easily you don t want to screw it in so tightly that it won t open! Now is the perfect time to put in the nesting box trays and dividers (x2 piece 16 s and x3 piece 35 s.) They should each slot in and fit nicely. x 6pcs I sleep very soundly on a perch After the handles are in place, screw 2 C screws on each end and in the middle. The nesting box is complete! 10
11 StEp 11 StEp 12 3/4 of the way! It s time to attach the roof! Put roof piece 24 on top of the hutch, screwed with E screws. Be sure to apply lots of pressure for the best fit. Try swapping the pieces around and wiggling a bit if the roof doesn t fit well and refer to piece 24 s timber lugs on the underside to help align correctly - you might need a step ladder! It s also time to put the roof cap on. Grab Piece 25 (the roof cap) Screw in using F screws be careful not to counter sink the screw heads as that might cause harm to the caps. Tip: We suggest putting the ramps on now if the coop is in position or on last if you need to move the coop into place. It s time to build the run! When connecting the pieces, line up the dowel holes so the end can be connected. Screw the pieces together with B screws as shown in the diagram. Make sure to orientate pieces 29 and 30 as pictured. Piece 33 pieces are the perches for the run. Line them up with the spaces provided (someone might need to go inside the run to hold it in place) then screw from the outside with B screws as indicated in the diagram. Piece 34 is a small handle. Push the dowel pieces on the handle into the spaces provided on the coop door, then screw in with 2 B screws as shown in the diagram. *If you are wanting a smaller run area, you can detach one of the pieces on piece 29 and 30 (not the door!) 11
12 StEp 13 StEp 14 Final Step! It s time to put the roof on the run! Rest Piece 32 on top of your run structure, ensuring all the sides are lined up neatly. Then, screw in with B screws on either side as per the diagram. It s time to attach the run to the hutch how egg-citing! When lining up the run to the hutch, make sure all the sides are flush and that the run is fully pushed up against the hutch you don t want there to be any gaps! Attach the run to the hutch using G screws, as shown in the diagram. If you are not using the Automatic Door Opener, then thread the rope with piece 32 for the internal door up through the wire mesh and tie a knot at the desired height or simply use the locking bolt. Hoorah! The Run is done! Wowee, When can I move in? 12
13 Woohoo! You ve built your Penthouse! Time For a Drink You Get My Cluck of Approval! 13
14 You ve Built the coop...now What? Share your egg-sperience! We want to hear your chicken keeping story! Share photos of your coop and answer a few quick questions and we ll reward you with $20 cash back or a gift card as our thank you! Your online customer portal Visit com.au/customer-portal and enter happyhens as the password to access your customer portal. Includes: Assembly videos and online instructions for assembling your coop and other products Showcase your fabulous coop! Get $20 Cash Back Links to join our newsletter and to follow us on Facebook, Instagram, and Pinterest Important documents and guides about keeping pet chickens and frequently asked questions for beginners Our top 10 articles for your other chicken keeping questions 14
15 optional extras for your coop! Hemp Bedding Auto Door Opener Shade Mesh Hen Health Kit Predator Sensor Light Designed to make your life easy! Perfect eggcessories to use your $20 voucher with! 15
16 Our Customer s Penthouses Yours could look like this! 16
LOWLINE SINGLE FOLD DOWN WALL BEDS
ASSEMBLY INSTRUCTIONS LOWLINE SINGLE FOLD DOWN WALL BEDS Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer Drill for Masonry) 6.5mm
More informationThis instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently.
This instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently. Don t be put off by the size of the instruction manual as the large diagrams
More informationFLOW HIVE ASSEMBLY GUIDE. If we look after the bees they will look after us, and the honey really is an amazing bonus. Flow Hive Hybrid 3 Frame
AUSTRALIAN MADE If we look after the bees they will look after us, and the honey really is an amazing bonus. FLOW HIVE ASSEMBLY GUIDE Flow Hive Hybrid 3 Frame Read all instructions first. If you are unfamiliar
More informationCook's Corner Kitchen Assembly Instructions
Assembly Instructions 00 Melissa & Doug, LLC All rights reserved 0 We care about your comments Please call us! -800-84-948 www.melissaanddoug.com PARTS D A E I ( pieces) Q N B F J R ( pieces) S ( pieces)
More informationThe Garden Coop SAMPLE PAGES NOT FOR USE. chicken coop construction plan METRIC VERSION. Copyright The Garden Coop LLC
The Garden Coop chicken coop construction plan METRIC VERSION what s inside Overview and precautions {read first!}...4 Tools and materials...5 Framing the walls...7 Setting the piers...13 Building the
More informationThank you for purchasing a Barn Owl Box Company product!
Dear Customer: Thank you for purchasing a Barn Owl Box Company product! Installing the Post Model of the Barn Owl Box When you first unpack your Post Model, make sure you have all of the following parts:
More informationBunk Pod Front Entry Assembly Instructions
Bunk Pod Front Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod This step by step guide will show how to assemble your pod(s) on site. It
More informationAssembly Instructions Eggstreme Chicken Coops
Assembly Instructions Eggstreme Chicken Coops Tools Needed Drill/Driver #2 screwdriver bit Pliers Scissors or wire cutter 3/4 wrench Parts List PO Box 1340 Henderson, TX 75653 800-527-1459 To insure a
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationQueen Wingback Bed King Wingback Bed
Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock
More information6625 WEST WILSHIRE BLVD. OKLAHOMA CITY, OK (405) FAX (405)
INSTALLATION INSTRUCTIONS FOR THE TAILGATE WITH LATCH AND LINK ASSEMBLY 76-87 FORD SHORT & 53-87 FORD LONG FLARESIDES 1. Assemble the bed and make sure the box is square. Measure the distance between the
More informationL.L.Bean. Wooden Slat Bed
L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationASSEMBLY GUIDE. Mia Narrow Bookcase
ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step
More informationStep 1: The tools you will need: 1x Phillips Screwdriver 1x Vending Machine key
2 3 The tools you will need: 1x Phillips Screwdriver 1x Vending Machine key Step 1: Open the boxes and inventory each of the parts before assembling. Each stand will consist of 1 16 inch Round Base, 1
More information1104. Clean up the door striker plates with a hand grinder using a wire brush and WD-40.
Chapter 31 - Misc. Putting VW Back Together (Video Clip 31) 1104. Clean up the door striker plates with a hand grinder using a wire brush and WD-40. 1105. Install both door striker plates on the VW body
More information*Patent Pending. *Trademarked. Series II. Glass Conversion Kit. (888) One-Products (888)
*Patent Pending *Trademarked Series II Glass Conversion Kit www.onepieceproducts.com (888) One-Products (888) 663-7763 Installation Manual Full One Piece Door Glass Conversion Kit Series II 1967-1972 Chevy
More informationWARNING: Prior to installation, turn the power off to the vending machine and unplug it from its power source. Also, make sure to level the machine.
Installation of Gum and Mint Tray for National 147, 157, 167 Important Note: Please read all instructions thoroughly before continuing with installation of kit. If you are having problems installing the
More informationStage 2: Preparing the door (read in conjunction with Hole Drilling Options on back of Template).
There are three stages to fitting the CL100 mortise case: Stage 1: Marking out the position of the lock. Stage 2: Preparing the door by mortising and drilling holes. Stage 3: Fitting lock, door furniture,
More informationCopyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people
More informationPRINCESS SINGLE BED WITH TRUNDLE
PRINCESS SINGLE BED WITH TRUNDLE If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have
More informationConstable Oak Extension Dining Table
Constable Oak Extension Dining Table Assembly Instructions - Please keep for future reference 176/0325 Dimensions Width - 160/ 200cm Depth - 90cm Height - 75cm Important - Please read these instructions
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationPOWER PET. Low-E Automatic Patio Pet Door Installation and Operating Instructions
POWER PET Low-E Automatic Patio Pet Door Installation and Operating Instructions Power Pet, Regular Height, Patio Door Assembly Steps Estimated assembly time: Under 1 hour STEP 1: Assemble the tools you
More informationPage 1 of 5 Instructions for Fitting Lower Grille to S Type Jaguar. Part Code 9048
Page 1 of 5 Instructions for Fitting Lower Grille to S Type Jaguar. Part Code 9048 To fit this grille you will need: Torch, 10mm spanner, 10mm socket with extension, T30 torx bits, Screwdrivers, Pliers,
More informationSeries 1500 Aluminum Door Canopy
Series 500 Aluminum Door Canopy with Sidewings It is our recommendation that you read instructions carefully prior to assembly and installation. Series 500 with Sidewings mounting bar (A) top trim (B)
More information** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at:
3/01/2007 VISIT THE LITIME WEB SITE: WWW.LITIME.COM ** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at: 1 (800) 225-3865 Double Shed Doors for Back
More informationAmerican Morse Equipment
American Morse Equipment Thank you for purchasing an American Morse Porta Paddle-II Kit. We redesigned the original Porta Paddle for ease of assembly & provide all parts finished and ready for assembly,
More informationWILDING WALLBEDS INSTALLATION INSTRUCTIONS Bed with storage headboard
WILDING WALLBEDS INSTALLATION INSTRUCTIONS Bed with storage headboard INSTRUCTION BOOKLET #13 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN POWERFUL LIFTING COMPONENTS. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS
More informationIntroduction. Rocky Mountain Westy Swing Away Carrier Kit Installation Instructions
Rocky Mountain Westy Swing Away Carrier Kit Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Swing Away Carrier Kit. We pride ourselves in the products we develop
More informationINSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE:
INSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE: 268 June 22, 2010 TOOLS NEEDED COMPONENTS INCLUDED P2 Tip 3/8" Drill Rubber Gasket(s) x 2 Bracket(s) x 2 1/2" Drill Bit Bulkhead Flange #2 Phillips
More informationTherma-Tru Door Gallery Setup Instructions Swing Unit with Hardware Kit - Hardware Part # MADGSWU15 (Swing Unit) Part # MADGHKSU10 (Hardware Kit)
Swing Unit with Hardware Kit - Hardware Tools Included: 4mm Allen Wrench, 6mm Allen Wrench, 8mm T-Handle Allen Wrench (1) 3/4" Drill Bit, (1) 7/32" Drill Bit and Hole Template Guide Tools Required: Phillips
More informationE N G L I S H GARDEN SHED. Assembly Instructions. Suitable for Models WITH VARYING DEPTHS
GARDEN SHED Assembly Instructions Suitable for Models 6' Wide 8' Wide 0' Wide WITH VARYING DEPTHS GI0003 November 0 INSTALLATION ADVICE It's Not That Difficult! The construction of your shed isn't as complicated
More informationINSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD
For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD INSTRUCTION BOOKLET #34 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationCHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
More informationDouble Screen Door Installation Instructions
Double Screen Door Installation Instructions (36) #8x1 tek screws (20) #8x1/2 tek screws Package Includes: (2) PCA Screen Doors (1) Astragal (1) Left Hand Z-bar (1) Right Hand Z-bar (1) Header Z-bar (2)
More informationParts list continues on Page 2 HOUSE PARTS PACKED IN HOUSE BOX PARTS IN SMALL PLASTIC BAG (HARDWARE) POST PARTS PACKED IN THIS BOX (LARGE PLASTIC BAG)
Form 05-07 Instructions and Parts List MSS- Martin Safety System NOTES: () A complete system is packed in two boxes post box and house box. House box contains hardware for both post and house assembly.
More informationCOMPACT. Assembly Instructions
UK COMPACT Assembly Instructions 1 Dear Friend: Thank you for purchasing the new Compact ComposTumbler. Properly assembled and operated, your new tumbler can go on giving you rich, healthy compost for
More informationPetSafe Cat Windoor. Installation Guide. Please read this entire guide before beginning
PetSafe Cat Windoor Installation Guide Please read this entire guide before beginning Thank you for choosing PetSafe. Our mission is to be the most trusted brand in the pet ownership experience. We want
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationGreenhouse Assembly Instructions
Greenhouse Assembly Instructions Our Help Line provides support and advice to customers of Summer Garden Buildings after ordering. For advice before you buy you can phone us free 7 days a week on 0800
More informationEmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY
EmagiKit Privacy Pod Plus Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY DIMENSIONS AND COMPONENTS 47 47 Ceiling Unit 2-B 2-L 2-R Glass Door Corner Trim Door Handle 90 Adjustable Height Work Surface 1-B
More informationGarage. Door. Unframed Tracked Fitting Instructions V2.2. fitting instructions. Warning!
Garage Door fitting instructions Unframed Tracked Fitting Instructions V2.2 Warning Garage doors are under extreme pressure from the spring system and a poorly installed frame could lead to serious injury
More informationInstallation for Full Size Polaris Ranger Crew Doors
Installation for Full Size Polaris Ranger Crew Doors Order of Installation: Heater Doors Wiper on to Windshield Windshield Top & Back Panel Note: Most of the steps in these instructions need to be repeated
More informationv1.0 ASSEMBLY GUIDE Josie Sideboard Large
v1.0 ASSEMBLY GUIDE Josie Sideboard Large Components Upon unpacking your sideboard from it s delivery box, you should have the separate pieces shown below. Follow the steps on the next pages to assemble
More informationCharlotte Dressing Table & Stool Set L4294
Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried
More informationSeries 1100 Aluminum Door Canopy
Series 00 Aluminum Door Canopy with Support Arms It is our recommendation that you read instructions carefully prior to assembly and installation. Series 00 with Support Arms MOUNTING BAR (A) TOP TRIM
More informationASSEMBLY INSTRUCTIONS FOR MAR-K BEDSIDES AND GM FLUSH TAILGATE WITH HANDLE
ASSEMBLY INSTRUCTIONS FOR MAR-K BEDSIDES AND 41-53 GM FLUSH TAILGATE WITH HANDLE Build the box assembly according to the MAR-K assembly instructions. When installing the tailgate and latching mechanisms
More informationInstalling Your Electronic Deadbolt
Ultra Security Plus Electronic Deadbolt Installation Instructions http://www.hberger.com/video-gallery/electronic-deadbolt New Installation Lock Location Preparation (Skip this section if you door has
More informationThe Festival Assembly Instructions
The Festival Assembly Instructions Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown CONTACT INFORMATION: HomePlace Structures 301 Commerce Drive New
More informationTOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.
TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support
More informationRequired Tools: Suggested Additional Tools: 1 Cordless Drill with Robertson Bits 1 Ratchet Wrench 1 7/16 or 11mm socket 1 7/16 or 11mm Gear Wrench
Thank you for your recent purchase of a Cabinets by Hayley garage cabinet system. You are about to experience the best made cabinets that you can purchase. Cabinets by Hayley are designed for beauty and
More informationTuscany 32" x 79" Open Bookcase
Tuscany 32" x 79" Open Bookcase ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return
More informationKai Installation Instructions
Kai Installation Instructions Before Beginning Installation Read through the entire instruction thoroughly A minimum of 2 people are required for this assembly These instructions reflect typical assemblies;
More informationv1.0 ASSEMBLY GUIDE Josie Sideboard Small
v1.0 ASSEMBLY GUIDE Josie Sideboard Small Components Upon unpacking your sideboard from it s delivery box, you should have the separate pieces shown below. Follow the steps on the next pages to assemble
More informationHow To Measure Your Finished Opening
3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips
More informationhttps://www.wallbedsbywilding.com/wallbed-installation-studio-series/
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More information2017 UPDATED INSTALLATION INSTRUCTIONS
2017 UPDATED INSTALLATION INSTRUCTIONS with square composite or round metal balusters Manufactured by fiberondecking.com 800.573.8841 Horizon Railing 6 ft. and 8 ft. Installation Instructions Required
More informationMODEL No: GSS3030G. Model No:...GSS3030G Overall Size (W x D X H*) x 3000 x 2100mm Roof Type:...Gable *Minimum Wall Height
1. SAFETY INSTRUCTIONS INSTRUCTIONS FOR: GALVANIZED STEEL SHED GREEN 3 x 3 x 2.1m MODEL No: GSS3030G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used
More informationTOOLS REQUIRED: HARDWARE INCLUDED: 13MM FLAT WRENCH FOR LEVELING THE STRUCTURE RATCHET WITH 5MM HEX BIT FOR CORNER SCREWS ON TOP TRAVERSE BEAMS
1 TOOLS REQUIRED: RATCHET WITH 5MM HEX BIT FOR CORNER SCREWS ON TOP TRAVERSE BEAMS 13MM FLAT WRENCH FOR LEVELING THE STRUCTURE RUBBER MALLET FOR INSERTING PANELS 8MM HEX BIT WITH EXTENSION FOR HEX BOLT
More informationWhalen Furniture Mfg. Factory No. 5 Page # 1
If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have your instructions and parts list
More informationPH03 Comfort XL Front Assembly Replacement Instructions
PH03 Comfort XL Front Assembly Replacement Instructions POLYJOHN USA PolyJohn Enterprises Corp 2500 Gaspar Ave. Whiting, IN 46394 Phone: 800-292-1305 Fax: 219-659-0625 www.polyjohn.com info@polyjohn.com
More informationEASY POOL STEP (NE113)
EASY POOL STEP (NE113) FOR USE WITH: EASY POOL STEP (NE113) (1 CARTON) EASY POOL STEP WITH OUTSIDE LADDER (NE126) EASY POOL STEP ENTRY SYSTEM (NE138) (With Gate) (4 CARTONS) Above are the options available
More informationBaby Grande or Grande Crank Shade with Cables and Housing Installation Instructions
Baby Grande or Grande Crank Shade with Cables and Housing Installation Instructions Tools Needed Drill 3/8 Metal Drill Bit Screwdriver (Flat & Phillips) Measuring Tape Pencil 4 Level Plumb Line ¼ Masonry
More informationINSTRUCTION BOOKLET #C0 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationEASY-IN POOL STEP SYSTEM NE132
EASY-IN POOL STEP SYSTEM NE132 This instruction manual features multiple guides for the step unit components. 7939 EASY POOL STEP (NE113) FOR USE WITH: EASY-IN POOL STEP (NE126) 6492 PARTS & HARDWARE FOR
More informationMedium HoneyBadger Chase Rack Installation Instructions
PREPARATION Medium HoneyBadger Chase Rack Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We recommend reading
More informationv1.0 ASSEMBLY GUIDE Edgar Tall Chest of Drawers
v1.0 ASSEMBLY GUIDE Edgar Tall Chest of Drawers Components Upon unpacking your tall chest of drawers from it s delivery box, you should have the separate pieces shown below. Follow the steps on the next
More informationEASY POOL STEP (NE113)
EASY POOL STEP (NE113) FOR USE WITH: EASY POOL STEP (NE113) (1 CARTON) EASY POOL STEP WITH OUTSIDE LADDER (NE126) EASY POOL STEP ENTRY SYSTEM (NE138) (With Gate) (4 CARTONS) Above are the options available
More informationHOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
More informationBABY WOLF LOOM. Assembly Instructions for Knocked-Down Looms
BABY WOLF LOOM Assembly Instructions for Knocked-Down Looms BEFORE YOU BEGIN Please read through the directions before beginning to assemble your loom. Unpack the loom parts carefully. Do not throw away
More informationM10 x 75mm Sockethead Cap Screws. 5mm Fender Washer (12) Included - (8) Required. #10 x 2.5" PH Wood Screws. (30) Included - (24) Required
Door System Unit - Hardware Tools Included: (2) 2mm Allen Wrenches, (2) 3mm Allen Wrenches, (2) 4mm Allen Wrenches, (2) 6mm Allen Wrenches, and (1) 8mm T-Handle Allen Wrench Tools Required: Phillips Screwdriver,
More informationpottery barn kids MADISON CABINET HUTCH
pottery barn kids MADISON CABINET HUTCH IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two adults is recommended. PRE-ASSEMBLY: Remove
More informationLOCKN LOAD FIRST TIME INSTALLATION
LOCKN LOAD TM TRACK MOUNTING KIT MITSUBISHI TRITON MQ DUAL CAB 2015+ 2 BAR TRACK HEAVY DUTY ROOF RACK SYSTEM MAX VEHICLE ROOF LOAD RATING: 100KG TOTAL LOAD EQUALS WEIGHT OF ROOF RACKS + ACCESSORIES + CARGO
More information4x6 Barn/Gable Coop With Wheels
4x6 Barn/Gable Coop With Wheels Tools Needed: -Cordless Drill (12V or higher) -#2 Square Drive Bit -Hammer -Tape Measure -Speed Square Little Cottage Co. PO Box 455 Berlin, OH 44610 330-893-4212 www.cottagekits.com
More informationINSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More informationFollow this flight path
For assembly of your wrought iron Playtop Bird Home Follow this flight path 1 READ! READ! READ! READ THESE INSTRUCTIONS! If you ve never followed instructions before, this is a good time to start! These
More informationWallboard or plastic Pre-drill holes and use hollow wall anchors or toggle bolts to install your shade in wallboard or plastic.
Woven Wood Shades Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Congratulations on purchasing Woven Wood Shades from Blindster. This window
More informationAssembly Instructions 10 X 10 Aluminum Frame Building
Assembly Instructions 10 X 10 Aluminum Frame Building 27 97 9 8 47 36 74 52 10 10 X 10 Square Building W/ Dome Includes: The Steel Entry Door with a Dead Bolt Lock assembly and Aluminum Door Frame. Metal
More informationMCH42 / MCH48 MODULAR SERIES 2400/3000 CORNER HUTCH
/ MODULAR SERIES 2400/3000 CORNER HUTCH IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up
More informationDeck Mount Installation with Bench
Deck Mount Installation with Bench 1. Mark track with square. 2. Cut tracks with saw. 3. Drill ¼ hole (if needed.) 4. Countersink track. 5. Countersink all track 6. File all track ends. ends. 7. Lay out
More informationTools Required Page 1. KIT CONTENTS: Smoking Shelter Page 1-2 Smoking Shelter Optional Extras Page 3
TM MODUS SHELTER 770 AND 1280 FLAT PACK ASSEMBLY & FIXING INSTRUCTION LEAFLET NOTE: Ensure that all relevant personnel read the points listed below and that a copy is passed on to staff involved with the
More informationWILDING WALLBEDS INSTALLATION INSTRUCTIONS Bed with storage headboard
WILDING WALLBEDS INSTALLATION INSTRUCTIONS Bed with storage headboard INSTRUCTION BOOKLET #13 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN POWERFUL LIFTING COMPONENTS. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS
More informationExtendable Swing Shut Gate
Extendable Swing Shut Gate WIDTH Adjustable from 72.5 to 95 cm HEIGHT Top of gate to floor 78 cm SPINDLES x 4 WALL CUPS x4 7cm EXTENSIONS x2 GATE NUTS x 4 SPANNER x Note: Each 7cm extension comprises of
More informationBaby Grande or Grande Crank Shade with Cables and Housing Installation Instructions
Baby Grande or Grande Crank Shade with Cables and Housing Installation Instructions Tools Needed Drill 3/8 Metal Drill Bit Screwdriver (Flat & Phillips) Measuring Tape Pencil 4 Level Plumb Line ¼ Masonry
More informationINSTALLATION AND CARE INSTRUCTIONS
INSTALLATION AND CARE INSTRUCTIONS Vertical Applications Honeycomb Shades CONTENTS Introduction...2 Before You Begin...3 Vertical Application Parts Overview...4 Materials Required...5 Tools Required...6
More informationFor additional assistance call
The following pages will help guide you through the process of assembling your new 48 custom prize wheel. Choose an assembly area with plenty of room to lay your pieces on the floor and also a bench or
More informationHardware Installation. Do this first:
1 Do this first: Hardware Installation Need some help? Here s what you ll need: 4 AA Batteries Phillips screwdriver Visit us online. support.remotelock.com We re here to help. 1 (877) 254 5625 support@remotelock.com
More informationThor Audi A4/S4 Skid Plate Installation Instructions
Thor Audi A4/S4 Skid Plate Installation Instructions Parts List: 1 Aluminum Skid Plate 2 Aluminum Side Wings 10 10mm Flat Washers 3 8mm Flat Washers 3 8mm Speed Clips 2 10x40mm Bolts 3 8x35mm Bolts 2 Rivet-nuts
More informationSwingSafe Swing-Away Mailbox Support Diagram
SwingSafe Swing-Away Mailbox Support Diagram Wood Mounting Plates Top Arm (B) Muffler Clamps (A) Carriage Bolts and Nuts Bottom Arm 4-Foot U-Channel Post USPS Recommended 42-44 Height Ground Slope Hex
More informationINSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationPremium Light Filtering Sheer Shade
Premium Light Filtering Sheer Shade Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Congratulations on purchasing a Premium Light Filtering
More informationHOME BAR SERIES 3 DRAWER BASE STOP. Warning: Excessive weight hazard! ATTENTION: Is your cabinet damaged?
HOME BAR SERIES 3 DRAWER BASE Warning: Excessive weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets.
More informationLevel, Pliers, 3/8" Electric Drill, Carpenters Square, Tape Measure, Metal Hack Saw, Silicone Caulking, Screw Drivers (Regular & Phillips)
Delta Door Canopy Installation Instructions Recommended Tools: Before You Begin: Level, Pliers, 3/8" Electric Drill, Carpenters Square, Tape Measure, Metal Hack Saw, Silicone Caulking, Screw Drivers (Regular
More informationPleated Shades with Continuous Cord Loop Option
Pleated Shades with Continuous Cord Loop Option Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Thank you for purchasing a Pleated Shade
More informationFor Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More information6X3 Patio Garden Shed Assembly Manual
Thank you for purchasing a 6x3 Patio Garden Shed. Please take the time to identify all the parts prior to assembly. Revision #4 July 6th, 2016 6X3 Patio Garden Shed Assembly Manual Please use Safety Eyewear
More information