Multi-Drill Type SMD. Sumitomo Multi-Drills with Replaceable and Regrindable Heads. Programme Expansion:

Size: px
Start display at page:

Download "Multi-Drill Type SMD. Sumitomo Multi-Drills with Replaceable and Regrindable Heads. Programme Expansion:"

Transcription

1 TOOLING NEWS E-99 P M K N S H Sumitomo Multi-Drills with Replaceable and Regrindable Heads Multi-Drill Type SMD Prograe Expansion: Large Hole MTL Type - High Drilling Accuracy Drill Diameter up to Ø 4,5 for Structural Steel

2 Multi-Drill Heads Front screw clamp design MultiDrill design + special coated carbide Radial serration provides steady and precise clamping Oil holes are directed at cutting lip Special treated body for high wear and rust resistance Assembly Toolholder Characteristics Detachable head type drill using a radial serrated connection design for high precision and strength. The exchangeable drill head provides a new cutting edge, higher productivity and tool management. Regrinding allowance of 1,5 to 3,0 makes further tool cost reductions possible. Cost Comparison Series Tool Costs 100% 50% Reduced costs! Holder 10 Drill Heads New Drill New Drill New Drill New Drill New Drill } } } } } Regrinds (4x) Regrinds (4x) Regrinds (4x) Regrinds (4x) Regrinds (4x) Heads Toolholder (L/D) Applications ØD range MTL Type MEL Type MB Type M3 Type (3D) M5 Type (5D) M8 Type (8D) M3 Type (3D) M5 Type (5D) M8 Type (8D) B3 Type (3D) General Steel Soft Steel, Stainless Steel, Grey Cast Iron Structural Steel Ø1,0 ~ Ø4,5 Ø1,0 ~ Ø4,5 Ø13,5 ~ Ø4,5 Ø1,0 ~ Ø30,5 Ø1,0 ~ Ø30,5 Ø13,5 ~ Ø30,5 Ø4,5 ~ Ø6,7 MultiDrill MTL Type Brazed Drill Drilling Precision 18, 10 MultiDrill MTL Type Competitor A Competitor B Brazed Drill MultiDrill MTL Type: Normal Wear After 900 holes (equivalent to 34m) Work Material: C50 External Diameter: Ø18,0 Cutting Conditions: =70m/min, f=0,5/rev Hole Depth 38, Wet Hole Size () 18, 05 18, 00 17, No. of Holes Competitor s A: Large Wear Competitor s B: Edge Chipping After 900 holes (equivalent to 34m) After 670 holes (equivalent to 34m) Characteristics of DEX Coating Sumitomo Electric Hardmetal s next-generation drill coating utilises nano-coating technology to provide more than double the tool life of conventional coatings. Silicon and chrome improve wear, heat and adhesion resistance. Drastically Reduced Rake Face Wear DEX Coating (ACX70) Coating Design coating is made from alternate layers of super multi-layered substrates. TiAlCr Super Multi- Layer Coating TiSi Super Multi- Layer Coating Characteristics of Films Coating Hardness (GPa) DEX TiSiN 30 TiAlN TiCN 0 TiN Poor < Chipping Resistance > Good Conventional Coating (ACZ70S) Work Material: C50 Cutting Conditions: =80m/min f=0,5/rev Hole Depth: 38, Wet Cutting Length: 3,8m

3 Multi-Drill MTL Type X-Type Thinning DEX Coating Web thinning with excellent centring Large edge treatment Strong peripheral cutting edge Application Examples (MTL Type) Performance Comparison (%) Tool life (pcs) pcs MTL type Tool Life Competitor s Indexable Drill Work Material: Drill Size: Cutting Conditions: Hole Depth: C (Housing) For Ø15x5D =107m/min, f=0,3/rev 3 x 1holes Tool Life Comparison 6000 pcs MTL type 1800 pcs Competitor s Brazed Drill Tool life extended by 3,3x. Work Material: C45 (Bracket) Drill Size: For Ø0x3D Cutting Conditions: =98m/min, f=0,18/rev Hole Depth: 17 MEL Type - Overlap Thinning DEX Coating Large thinning angle Cutting edges perform superbly with SUS and soft steel Large thinning angle solves the convex R part breakages peculiar to soft steel and reduces adhesion breakages with SUS. Small edge treatment Sharp peripheral cutting edge Improves chipping resistance around hole openings in Cast Iron Edge sharpness improvements in peripheral areas prevent chipping around hole openings in cast iron. Application Examples (MEL Type) MEL (Cutting Length 15m) Multi-Drill MEL type has excellent no edge breakage after 15m. Work Material: Drill Size: Cutting Conditions: Competitor s Drill (C/L=11m) Breakage in Centre Competitor s indexable drill exhibited marks. The centre of the drill broke after 11m of drilling. X5CrNi1810 Ø 14x5D =60m/min, f=0,15/rev, Coolant: Emulsion Type Image of Work Material Performance Comparison (%) 140 1, MTL type Tool Life Tool Life (holes) Competitor s Solid Carbide Drill Work Material: Hole Dia: Hole Depth: No. of Holes: Coolant: Hub (equiv. of C55) Ø14,0 ±0,07 10 (through) 4 Emulsion type MTL Type Cutting =60m/min, f=0,3/rev Conditions: (v f =409/min) Tool Life: 1600 holes Delivers stable drilling precision with -3 times longer tool life the previous drills. Competitors s Solid Carbide Drill Cutting =70m/min, f=0,/rev Conditions: (v f =318/min) Tool Life: 700 holes It becomes unusable after recoated 3 times. tions Stable and long tool life even when used with low rigidity work, jigs and equipment MEL Type: 000 uses Smooth chips MTL Type: 676 uses Chips have multiple straight edges 5% Reduction in Cutting Resistance (Thrust Force) MEL type features 5% reduced thrust compared to MTL type! Thrust Power (N) MEL Type MTL Type Work Material: S50C External Diameter: Ø14 Cutting Conditions: =80/rev f=0,15 f=0, f=0,5 Feed Rate f (/rev) Work Material: External Diameter: Cutting Conditions: C50 - Vehicle Chassis Component, Vertical Machine (BT40) Ø 8, =80m/min, f=0,3/rev, Ø8x30 (Blind Hole), Wet and improve chip management, allowing stable drilling in low rigidity setups. 3

4 Replaceable Head Type Drill Holder SMDH Type Holder = Effective drilling length Holder Dimensions Drill Head Shank Cat. No. Short Series (3D) Long Series (5D) Deep Hole Series (8D) Stock Dimensions Stock Dimensions Stock Dimensions () Applicable Drill Head Ø D Ød M3 L M5 L M8 L 1 3 1,0, SMDH , 38,0 13, 63, SMDT 100~149 D M L 1,5,3 SMDH ,3 37,8 13,3 6, SMDT 150~199 D M L ,0,4 SMDH ,4 40,5 14,4 67, SMDT 1300~1349 D M L 14,0,5 SMDH ,0 45,5 149,0 74,5 194,0 117,5 SMDT 1350~1450 D M L 15,0,7 SMDH , 48,0 159, 79,0 04, 16,0 SMDT 1451~1550 D M L 16,0,9 SMDH ,4 51,5 169,4 84,5 14,4 133,5 SMDT 1551~1650 D M L ,0 3,1 SMDH ,6 54,0 174,6 89,0 4,6 14,0 SMDT 1651~1750 D M L 18,0 3,3 SMDH ,8 57,5 179,8 94,5 9,8 149,5 SMDT 1751~1850 D M L 19,0 3,5 SMDH ,1 60,0 195,0 99,0 55,0 158,0 SMDT 1851~1950 D M L 0,0 3,6 SMDH ,1 63,5 00,1 104,5 65,1 165,5 SMDT 1951~050 D M L 1,0 3, SMDH ,3 66,0 00,3 109,0 70,3 174,0 SMDT 051~150 D M L,0 4,0 SMDH 0 165,1 69,1 05,1 114,1 75,1 181,1 SMDT 151~80 D M L 3,0 4, SMDH ,8 71,0 14,8 118,1 84,8 189,1 SMDT 81~380 D M L 4,0 4,4 SMDH ,6 74, 4,6 13, 99,6 196, SMDT 381~480 D M L 5,0 4,6 SMDH ,6 75,5 9,6 17,5 304,6 04,5 SMDT 481~580 D M L 6,0 4,7 SMDH ,7 79,0 34,7 133,0 314,7 1,0 SMDT 581~680 D M L 7,0 4, SMDH ,9 80,5 39,9 137,5 34,9 0,5 SMDT 681~780 D M L 8,0 5,1 SMDH ,1 83,0 45,1 143,0 330,1 8,0 SMDT 781~880 D M L 9,0 5,3 SMDH ,3 85,5 50,3 147,5 340,3 36,5 SMDT 881~980 D M L 30,0 5,5 SMDH ,5 89,0 60,5 15,0 350,5 44,0 SMDT 981~3080 D M L Euro stock Recoended Torque Screw Torque (Nm) Applicable Insert Spare Parts Screw Wrench Applicable Holder BXD 008 IP 0,8 ~ 1,0 SMDT 100 ~ 1550 M L BXD 0509 IP 0,9 ~ 1, SMDT 1551 ~ 1850 M L BXD IP 1,8 ~,4 SMDT 1851 ~ 150 M L BXD 0351 IP,8 ~ 3,7 SMDT 151 ~ 480 M L BXD IP 4,1 ~ 5,5 SMDT 481 ~ 780 M L BXD IP 5,0 ~ 6,6 SMDT 781 ~ 3050 M L BDX 008 IP TRDR 08 IP SMDH 10 ~ 150 M BDX 0509 IP TRDR 10 IP SMDH 160 ~ 180 M BDX IP TRDR 15 IP SMDH 190 ~ 10 M BDX 0351 IP TRDR 15 IP SMDH 0 ~ 40 M BDX IP TRDR 0 IP SMDH 50 ~ 70 M BDX IP TRDR 5 IP SMDH 80 ~ 300 M 4

5 SMDT...D MTL/MEL Type PVD coated grade: MTL - ACX70 MEL - ACX80 ØD: 1,0 ~ 15,3 ØD: 15,4 ~ 18,7 ØD: 18,8 ~ 30,5 ØD Cat. No. H ØD MTL MEL Cat. No. H ØD MTL MEL Cat. No. () () () () () 1,0 SMDT 100 D 9,1 15,4 SMDT 1540 D 11,0 1,1 SMDT 110 D 9,1 15,5 SMDT 1550 D 11,0 1, SMDT 10 D 9,1 15,6 SMDT 1560 D 11,0 1,3 SMDT 130 D 9,1 15,7 SMDT 1570 D 11,0 1,4 SMDT 140 D 9,1 15,8 SMDT 1580 D 11,0 1,5 SMDT 150 D 9,4 15,9 SMDT 1590 D 11,0 1,6 SMDT 160 D 9,4 16,0 SMDT 1600 D 11,6 1,7 SMDT 170 D 9,4 16,1 SMDT 1610 D 11,6 1,8 SMDT 180 D 9,4 16, SMDT 160 D 11,6 1,9 SMDT 190 D 9,4 16,3 SMDT 1630 D 11,6 13,0 SMDT 1300 D 9,7 16,4 SMDT 1640 D 11,6 13,1 SMDT 1310 D 9,7 16,5 SMDT 1650 D 11,6 13, SMDT 130 D 9,7 16,6 SMDT 1660 D 11,6 13,3 SMDT 1330 D 9,7 16,7 SMDT 1670 D 11,6 13,4 SMDT 1340 D 9,7 16,8 SMDT 1680 D 11,6 13,5 SMDT 1350 D 10,3 16,9 SMDT 1690 D 11,6 13,6 SMDT 1360 D 10,3 17,0 SMDT 1700 D 1, 13,7 SMDT 1370 D 10,3 17,1 SMDT 1710 D 1, 13,8 SMDT 1380 D 10,3 17, SMDT 170 D 1, 13,9 SMDT 1390 D 10,3 17,3 SMDT 1730 D 1, 14,0 SMDT 1400 D 10,3 17,4 SMDT 1740 D 1, 14,1 SMDT 1410 D 10,3 17,5 SMDT 1750 D 1, 14, SMDT 140 D 10,3 17,6 SMDT 1760 D 1, 14,3 SMDT 1430 D 10,3 17,7 SMDT 1770 D 1, 14,4 SMDT 1440 D 10,3 17,8 SMDT 1780 D 1, 14,5 SMDT 1450 D 10,3 17,9 SMDT 1790 D 1, 14,6 SMDT 1460 D 10,3 18,0 SMDT 1800 D 1,9 14,7 SMDT 1470 D 10,3 18,1 SMDT 1810 D 1,9 14,8 SMDT 1480 D 10,3 18, SMDT 180 D 1,9 14,9 SMDT 1490 D 10,3 18,3 SMDT 1830 D 1,9 15,0 SMDT 1500 D 11,0 18,4 SMDT 1840 D 1,9 15,1 SMDT 1510 D 11,0 18,5 SMDT 1850 D 1,9 15, SMDT 150 D 11,0 18,6 SMDT 1860 D 1,9 15,3 SMDT 1530 D 11,0 18,7 SMDT 1870 D 1,9 Recoended Cutting Conditions Work Material Recoended Head Drill Ø () Cutt. Conditions ~ 16,0 ~ 0,0 Soft Steel (~HB50) 80 ~ ~ ~ 80 (40 ~ 60) 50 ~ 80 (40 ~ 60) MTL MEL H () 18,8 SMDT 1880 D 1,9 18,9 SMDT 1890 D 1,9 19,0 SMDT 1900 D 13,5 19,1 SMDT 1910 D 13,5 19, SMDT 190 D 13,5 19,3 SMDT 1930 D 13,5 19,4 SMDT 1940 D 13,5 19,5 SMDT 1950 D 13,5 19,6 SMDT 1960 D 13,5 19,7 SMDT 1970 D 13,5 19,8 SMDT 1980 D 13,5 19,9 SMDT 1990 D 13,5 0,0 SMDT 000 D 14,1 0,5 SMDT 050 D 14,1 1,0 SMDT 100 D 14,8 1,5 SMDT 150 D 14,8,0 SMDT 00 D 15,0,5 SMDT 50 D 15,0 3,0 SMDT 300 D 15,1 3,5 SMDT 350 D 15,1 4,0 SMDT 400 D 15,4 4,5 SMDT 450 D 15,4 5,0 SMDT 500 D 15,8 5,5 SMDT 550 D 15,8 6,0 SMDT 600 D 16,4 6,5 SMDT 650 D 16,4 7,0 SMDT 700 D 17,1 7,5 SMDT 750 D 17,1 8,0 SMDT 800 D 17,7 8,5 SMDT 850 D 17,7 9,0 SMDT 900 D 18,3 9,5 SMDT 950 D 18,3 30,0 SMDT 3000 D 19,0 30,5 SMDT 3050 D 19,0 50 ~ 80 (40 ~ 70) 70 ~ 100 (40 ~ 70) f 0,15 ~ 0,3 0,15 ~ 0,3 0,1 ~ 0, 0,1 ~ 0, 0, ~ 0,3 0,15 ~ 0,3 80 ~ ~ ~ 90 (50 ~ 70) 60 ~ 90 (50 ~ 70) 60 ~ ~ 100 f 0,15 ~ 0,35 0,15 ~ 0,35 0,15 ~ 0,5 0,15 ~ 0,5 0, ~ 0,35 0,15 ~ 0,35 80 ~ 130 (60 ~ 90) General Steel (HB50~30) 80 ~ 130 (60 ~ 90) Hardened Steel (HRC45) 60 ~ 90 (50 ~ 70) Stainless Steel (~HB00) 60 ~ 90 (50 ~ 70) Grey Cast Iron 70 ~ 100 (60 ~ 90) Euro stock Nodular Cast Iron MEL Type MTL Type / MEL Type MTL Type MEL Type MTL Type / MEL Type MTL Type 80 ~ 110 (60 ~ 90) ~ 30,5 f 0, ~ 0,4 0, ~ 0,35 0,15 ~ 0,5 0,15 ~ 0,5 0, ~ 0,45 0, ~ 0,4 : Cutting Speed (m/min), f : Feed rate (/rev) Note: ( ): is the cutting conditions for using 8xD type drills. High cutting performance is enhanced when using a high quality machine and rigid set up. 5

6 Multi-Drill Large Hole MTL Type For Large Holes Tool edge design ideal for malleable material used for large casings, etc. Edge design suitable for malleable material coonly used for large hole drilling. Reduces movement when starting the hole X-Type Thinning Aims to reduce thrust under heavy cutting Large Thinning Angle Improved chip management for highly malleable materials Large Helix Angle Design Machined Surface Accuracy Work Material: St 5-3 (Base substrate for construction use) Drill Size: Ø33,0 x 5D Cutting Conditions: =10m/min, f=0,5/rev Cutting Environment: Emulsion Type High drilling accuracy with large diameters Cutting Force Comparison (Thrust) Work Material: St 4- (Laminated plates) Drill Size: Ø37,5 x 5D Cutting Conditions: =90m/min, f=0,35/rev Cutting Environment: Emulsion Type Designed to handle low machine and clamp rigidity Edge Treatment Exclusively for Large Diameters Prevents unexpected breakage when working with expensive materials Robust Substrate Stable even when machining laminated plates Entrance Measured Directions Exit Ø33,15 Ø33,10 Ø33,05 Ø33,00 Ø35,95 Ø3,90 Measured Point (1) Measured Point () (1) () Ø3,85 Entrance Intermediate Exit Good Chip Control Cutting Force (N m) 10,000 8,000 6,000 4,000, Depth of cut () Recoended Cutting Conditions Work Material Recoended Head Drill Ø () Cutt. Conditions ~ 36,5 Soft Steel (~HB50) 60 ~ 10 (40 ~ 80) 60 ~ 10 (40 ~ 80) 40 ~ 80 (30 ~ 60) 40 ~ 80 (30 ~ 60) 50 ~ 100 (40 ~ 90) 50 ~ 90 (40 ~ 70) f 0,5 ~ 0,4 0, ~ 0,35 0,15 ~ 0,3 0,15 ~ 0,5 0,5 ~ 0,45 0,5 ~ 0,35 60 ~ 10 (40 ~ 80) General Steel (HB50~30) 60 ~ 10 (40 ~ 80) Hardened Steel (HRC45) 40 ~ 80 (30 ~ 60) Stainless Steel (~HB00) 40 ~ 80 (30 ~ 60) v C =Cutting Speed (m/min) f=feed Rate (/rev) Grey Cast Iron 50 ~ 100 (40 ~ 90) Ductil Cast Iron MTL Type MTL Type MTL Type MTL Type MTL Type MTL Type 50 ~ 90 (40 ~ 70) ~ 4,5 f 0,5 ~ 0,4 0, ~ 0,35 0,15 ~ 0,3 0,15 ~ 0,5 0,5~ 0,45 0,5 ~ 0,35 Note: Where machining and work clamp rigidity are good, conditions may be increased up to the maximum. For 8D drills, please use feed rates stated within the ( ). Before drilling 8D holes, a guide hole of similar diameter must be made. 6

7 For Large Holes Indexable Head MTL Type Multi-Drill Toolholder h ød h7 ød h6 140 ød h7 ød h6 Drill Head (Ø31,0 to Ø4,5) Grade MTL Type - ACX80 Holders M (3D), L (5D), D (8D) Heads Toolholder Drill Diameter MTL Type M (3D) L (5D) D (8D) ØD h1 Cat. No. Stock Cat. No. Stock Cat. No. Stock Cat. No. Stock 31,0 SMDT 3100 MTL 31,5 SMDT 3150 MTL 15, SMDH 30 M SMDH 30 L SMDH 30 D 3,0 SMDT 300 MTL 3,5 SMDT 350 MTL 33,0 SMDT 3300 MTL 15, SMDH 335 M SMDH 335 L SMDH 335 D 33,5 SMDT 3350 MTL 34,0 SMDT 3400 MTL 34,5 SMDT 3450 MTL 16,6 SMDH 350 M SMDH 350 L SMDH 350 D 35,0 SMDT 3500 MTL 35,5 SMDT 3550 MTL 36,0 SMDT 3600 MTL 16,4 SMDH 365 M SMDH 365 L SMDH 365 D 36,5 SMDT 3650 MTL 37,0 SMDT 3700 MTL 37,5 SMDT 3750 MTL 18,1 SMDH 380 M SMDH 380 L SMDH 380 D 38,0 SMDT 3800 MTL 38,5 SMDT 3850 MTL 39,0 SMDT 3900 MTL 17,8 SMDH 395 M SMDH 395 L SMDH 395 D 39,5 SMDT 3950 MTL 40,0 SMDT 4000 MTL 40,5 SMDT 4050 MTL 19,5 SMDH 410 M SMDH 410 L SMDH 410 D 41,0 SMDT 4100 MTL 41,5 SMDT 4150 MTL 4,0 SMDT 400 MTL 19,3 SMDH 45 M SMDH 45 L SMDH 45 D 4,5 SMDT 450 MTL Mounted Figure Only use the special MTL Type head with a M, L or D type holder Japan stock L 3 Dimensions () M (3D) L (5D) D (8D) Shank Cap Screw Wrench Recoended Drill Head Dimensions () Dimensions () Dimensions () Dimensions () Tightening Torque ØD 1 L L L 3 Ød (N m) 31,0 31,5 5,7 97,9 00, ,7 57,9 360,7 60 3,0 3,0 3,5 BXD04515IP TRDR5IP 5 ~ 6,6 33,0 33,5 34,0 6,0 103,3 06,0 171,5 76,0 73,3 376,0 60 3,0 34,5 35,0 35,5 6,3 106,8 1, , , ,0 36,0 36,5 37,0 6,6 11,3 6,6 187,5 301,6 97,3 411, ,0 37,5 6,8 115,8 31,8 195,8 311,8 310,8 46, ,0 38,0 38,5 BX0515 HD040 7, 39,0 39,5 40,0 7,1 11,3 37,1 06,3 3,1 31,3 437, ,0 40,5 41,0 41,5 7,4 19,8 5,4 09,8 33,4 334,8 457, ,0 4,0 4,5 7,6 135,3 57,6 0,3 34,6 345,3 467, ,0 7

8 Multi-Drill For Structural Steel - deal for Drilling Rolled Steels for Structural Weldments (Single Layer and Laminate Material) X-Type Thinning DEX Coating Excellent fracture resistance + chip control Exclusive Edge for Structural Steel Application Examples for structural steel Good Chip Control management and evacuation. New J-grooved Flute Reduces shoulder chipping caused by unstable work-piece. Robust Substrate & Reinforced Edge Treatment Directs coolant to cutting edge even during MQL drilling Centre Oil Hole Work Material: St 5-3 =87m/min, Cutting Conditions: f=0,9/rev Competitor s Drill Elongated Chips 150 Point Angle improves chip evacuation. Highly Polished Flute Surface Work Material: St 5-3 Cutting Conditions: =87m/min, f=0,9/rev Cutting Length Comparison Case Current Tool Tool Life Comparison (Cutting Length) Cutting Conditions Case: 1 Case: Competitor A Indexable Head Model Competitor B Indexable Head Current Tool Current Tool 17m 4m 50m,5 x tool life 1,7 x tool life 87m =46m/min f=0,35/rev Coolant: MQL =56m/min f=0,30/rev Coolant: MQL Compared to Current Tool Life 1,7 x to 3 x Longer Tool Life Case: 3 Competitor C Brazed Head Current Tool 3m 3,0 x tool life 95m =54m/min f=0,30/rev Coolant: MQL Tool Cost Case: 4 Competitor D Indexable Head Model Current Tool 70m 1,7 x tool life 10m =60m/min f=0,30/rev Coolant: MQL Major Potential Savings Recoended Cutting Conditions, Work Material Recoended Head Drill Ø () Cutt. Conditions 4,5~ 6,7 Rolled Steel for Welded Structures St 4- Rolled Steel for Welded Structures St 5-3 Rolled Steel for Welded Structures SM50 v C =Cutting Speed (m/min) f=feed Rate (/rev) Rolled Steel for Welded Structures St ~ ~ ~ ~ 75 f 0,0~ 0,40 0,0 ~ 0,35 0,0 ~ 0,35 0,0 ~ 0,35 8

9 For Structural Steel Multi-Drill Drill Head Mounted Figure Only Use the special MB type head with a B3 type holder. Material : ACX80 Drill Diameter ØD Cat. No. Heads Toolholder Shank Cap Screw Wrench Stock Toolholder B3 (3D) Dimensions of Assem- B3 (3D) Dimensions () Dimensions () h 1 Cat. No. Stock 1 L 3 Ød Spare Parts, Recoended Tightening Torque 4,5 SMDT 450MB 15,4 SMDH 40B3 4,5 86, 174, BXD0351IP TRDR15IP,8 ~ 3,7 4,7 SMDT 470MB 6,5 SMDT 650MB 16,4 SMDH 60B3 4, , BXD04014IP TRDR0IP 4,1 ~ 5,5 6,7 SMDT 670MB Japan Stock Recom. Tightening Torque (N m) Improved Lubrication Flow to Edge (Rebinder effect) Rebinder effect The rebinder effect causes thinner chips by reducing the surface energy (by increasing the sheer angle) by allowing pressure MTL / MEL Type Holder for Structural Steel Coolant is directed closer to the cut edge. Head Coolant Comparison of Cutting Resistance (Thrust Force) Cutting Force (N m) Cutting Force (N m) Thrust increases 7,000 7,000 at start of hole Stable drilling 6,000 6,000 at start of hole 5,000 4,000 3,000,000 1, ,000 4,000 3,000,000 1, Depth of cut () Depth of cut () Work Material: St 4- Drill Diameter: Ø4,7 Cutting Conditions: =70m/min, f=0,35/rev Coolant: MQL Note: SMDT...MB heads only to be used with SMDH...B3 holders! 9

10 Multi-Drill For other special drill requirements not stated below, please feel free to consult our staff. Special Drill Design Check List Company / Contact Person: Drill Type Multi-Drill SMD type Shank Type Cylindrical type Rectangular type Multi-Drill SMD type with chamfering insert Whistle notch type Multi-Drill SMD type with counter boring insert Drilling/counter bore (WDXT ) L Type G Type H Type Chamfering (TP ) D (Drill diameter) Ø1 ~ Ø30,5 3 (Chamfer width) 3 and below d 1 (*) (Shank diameter) Ø16 ~ Ø (Drilling depth + counter bore depth) ØDx5 and below d 1 (Counter bore diameter) (Drilling depth) ØD ØDx5 and below (*) (Chamfer angle) (*) Please note that some restrictions apply Additional Requests: (Germany) SUMITOMO ELECTRIC Hartmetall GmbH Siemensring 84, D Willich Tel. +49(0) , Fax +49(0) Info@SumitomoTool.com Internet: Distributed by: (UK and Ireland) SUMITOMO ELECTRIC Hardmetal Ltd. Suerleys Road, Princes Risborough Buckinghamshire HP7 9PW, UK Tel. +44(0) , Fax: +44(0) enquiries@sumitomo-hardmetal.co.uk Internet: MAS GmbH E99-10/11-MD-LU

TOOLING NEWS E-140. Sumitomo Multi-Drills with Replaceable and Regrindable Heads. Multi-Drill Type SMD. Programme Expansion: 12 x D K N S H

TOOLING NEWS E-140. Sumitomo Multi-Drills with Replaceable and Regrindable Heads. Multi-Drill Type SMD. Programme Expansion: 12 x D K N S H TOOLING NEWS E-140 Sumitomo Multi-Drills with Replaceable and Regrindable Heads Multi-Drill Type SMD Prograe Expansion: 1 x D P M K N S H Multi-Drill Heads Front screw clamp design MultiDrill design +

More information

DRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill

DRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth

More information

Drill for Wheel Hubs. Solid Carbide Drill MHE

Drill for Wheel Hubs. Solid Carbide Drill MHE . Update B3G Expanded New Grade Solid Carbide Drill Uniue design provides superior hole accuracy for shallow hole drilling. Effective drilling of hub bolt holes can be achieved. Additional new grade DP30

More information

TAW Drill. Indexable insert drill, yet always stable drilling. Stable drilling with indexable drill B060A. MIRACLE Coated VP15TF

TAW Drill. Indexable insert drill, yet always stable drilling. Stable drilling with indexable drill B060A. MIRACLE Coated VP15TF B060A Stable drilling with indexable drill Indexable insert drill, yet always stable drilling Grade for high rigidity and longer tool life MIRACLE Coated MIRACLE coating displays high welding resistance

More information

DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation

DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High

More information

DRC type. MagicDrill. High efficiency drill module. New lineup. Machining diameters: Ø7.94-Ø20.99 Machining depths: 3D,5D,8D. High efficiency.

DRC type. MagicDrill. High efficiency drill module. New lineup. Machining diameters: Ø7.94-Ø20.99 Machining depths: 3D,5D,8D. High efficiency. MagicDrill DRC type High efficiency drill module Larger cutting diameters now available High efficiency High reliability High feed rate High quality lineup SS-DRC (Straight Shank) Machining diameters:

More information

High Precision Violet Series Drills for Counter Boring VA-PDS-CB Exclusive design for counter boring.

High Precision Violet Series Drills for Counter Boring VA-PDS-CB Exclusive design for counter boring. 212.12 Update B159B New sizes included High Precision Violet Series Drills for Counter Boring Exclusive design for counter boring. y Innovative cutting edge geometry for high performance counter boring.

More information

4/5/6RFH 4/5/6RFH NEW. High Efficiency Roughing End Mill for Difficult-to-Cut Material

4/5/6RFH 4/5/6RFH NEW. High Efficiency Roughing End Mill for Difficult-to-Cut Material For Difficult-to-Cut Material High Efficiency Roughing End Mill 4/5/6RFH High Efficiency Roughing End Mill for Difficult-to-Cut Material 4/5/6RFH NEW High Efficiency Machining of Difficult-to-Cut Material

More information

drill MITSUBISHI CARBIDE New Products LJ293A Large diameter sizes added. Solid carbide drill

drill MITSUBISHI CARBIDE New Products LJ293A Large diameter sizes added. Solid carbide drill MITSUBISHI CARBIDE LJ293A New Products Solid carbide drill Large diameter sizes added. MZ drill Internal and external coolant, multi purpose high performance drill. MZ drill, characteristics and application

More information

Flexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism

Flexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions

More information

Hertel Indexable Drills (HID)

Hertel Indexable Drills (HID) Hertel Indexable Drills (HID) mscdirect.com/hertel DESIGNED TO DELIVER Hertel cutting tools are designed to deliver consistency, reliability, durability and value with every cut. For over 65 years, Hertel

More information

T360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.

T360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338. T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool

More information

New Item & New Concept Tools Aqua EX Flat Drill

New Item & New Concept Tools Aqua EX Flat Drill New Item & New Concept Tools Aqua EX Flat Drill Completely Flat Point Angle! (Point Angle 180 ) Multi-Function Drill Covering Wide Application Range Aqua EX Flat Drill Sharpness & Rigidity at the Same

More information

New. Products2013.

New. Products2013. T u n g a l o y www.tungaloy.com Company Overview Providing Complete Tooling Solutions for the Metal Removal and Industrial Product Sectors TUNGALOY is one of the world s leading manufacturers of carbide

More information

DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation

DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High

More information

High percision clamping system Cutting edge produces good surface finishes. Holder with superb durability TPDB. Top Solid Piercing Drill Blade

High percision clamping system Cutting edge produces good surface finishes. Holder with superb durability TPDB. Top Solid Piercing Drill Blade Paleari Carlo S.a.s. di Pellegatta Annamaria & C. Via Asmara, 7-252 BUSTO ARSIZIO (VA) Tel. 01 3000 - Fax 01 3414 info@palearicarlo.com RIVENDITORE UNICO PER L'ITALIA High percision clamping system Cutting

More information

and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems

and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the

More information

B223E DLE MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING

B223E DLE MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING 2018.10 B223E MULTI-FUNCTIONAL - FOR CENTERING AND CHAMFERING Centering Hole Chamfering Edge Chamfering V-grooving FEATURES THINNED POINT GEOMETRY

More information

FeatuRes OF GeOMetRy. synchro tapping chuck (er type) advantages. GUIdE LINE TO ICONS

FeatuRes OF GeOMetRy. synchro tapping chuck (er type) advantages. GUIdE LINE TO ICONS FeatuRes OF GeOMetRy synchro tapping chuck (er type) advantages GUIdE LINE TO ICONS Working Material GS s with good machinability Rm

More information

-treme thread cutting. Tiny Tools. New Products. Metric

-treme thread cutting. Tiny Tools. New Products. Metric TM -treme thread cutting Tiny Tools New Products Metric 2014-2015 Tiny Tools Broaching Tools for Hexagon Keys - HK The HK broaching system have been developed to machine internal keyways inside blind or

More information

Plus Our NEW Quick Delivery Step Drill Program

Plus Our NEW Quick Delivery Step Drill Program LE ADING SOLUTIONS FOR CHAMFERED / THRE ADED HOLES Plus Our Quick Delivery Step Drill Program CHAMFERED / THREADED HOLE SOLUTIONS From standard stocked tools to our Quick Delivery Program a full range

More information

DRV DRV. MagicDrill. High Efficiency Indexable Insert Drill

DRV DRV. MagicDrill. High Efficiency Indexable Insert Drill High Efficiency Indexable Insert Drill High Efficiency Indexable Insert Drill MagicDrill Economical Inserts with 4 Cutting Edges. Excellent Chip Evacuation with 6D Maximum Deep-Hole Drilling D to 6D Drilling

More information

TOOLS NEWS B218G. Hydro-Clamp Type Valve Finisher HVF. New Product. Series. Drastically shortened time and reduced costs!

TOOLS NEWS B218G. Hydro-Clamp Type Valve Finisher HVF. New Product. Series. Drastically shortened time and reduced costs! TOOLS NEWS Hydro-Clamp Type Valve Finisher HVF Series B218G New Product Drastically shortened time and reduced costs! Cooperated with Hydro-Clamp Type Valve Finisher HVF Series Greatly Reduced Costs The

More information

Optimum tool for finish machining

Optimum tool for finish machining Series Expansion Indexable Ball-nose End Mill for Finishing Indexable Corner Radius End Mill for Finishing 2011.2 Update B065E SRF/SRB SUF High accuracy indexable end mill Optimum tool for finish machining

More information

KORLOY Indexable new generation drill KING DRILL

KORLOY Indexable new generation drill KING DRILL KORLOY Indexable new generation drill KING DRILL Optimized insert design for maximum drilling efficiency KING DRILL Code system of holder K 5D - 0 07 KING/KORLOY Aspect ratio(l/d) D,.5D, 3D, 3.5D, 4D,

More information

APRIL 2009 / NEW-100 / PAGE 1 OF 13

APRIL 2009 / NEW-100 / PAGE 1 OF 13 APRIL 2009 / NEW-100 / PAGE 1 OF 13 The standard UNIDEX line covers reaming applications from 5/16 to 1 1/4 diameter. The single indexable blade and high wear resistant carbide or cermet pads provide a

More information

Rich line up of indexable drills for various

Rich line up of indexable drills for various DrillLine Tungaloy Report No. 377-US TUNGDRILLTWISTED Rich line up of indexable drills for various machining needs ACCELERATED MACHINING DrillLine Excellent surface finish and stable chip evacuation due

More information

AQUA DRILL EX FLAT. Simple Process Less Burr

AQUA DRILL EX FLAT. Simple Process Less Burr Simple Process Less Burr 1 Drilling innovation with great performance New drilling technology Slope, counter boring, thin plate, blind tap hole, hole correction in one drill. Pre hole of Slope Counter

More information

LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY

LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic

More information

Improved Efficiency for Slot Milling with Deep Depths of Cut

Improved Efficiency for Slot Milling with Deep Depths of Cut TOOLS NEWS B230G Corner Radius End Mill for High Efficiency Titanium Alloy Machining New Product Improved Efficiency for Slot Milling with Deep Depths of Cut Corner Radius End Mill for High Efficiency

More information

The new generation end mill series. Ideal for efficient and economical machining of general milling applications.

The new generation end mill series. Ideal for efficient and economical machining of general milling applications. New vibration control solid carbide end mill series SHV, MHV TAR vibration control end mill series The new generation end mill series. Ideal for efficient and economical machining of general milling applications.

More information

Highly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy.

Highly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy. B041G CDV for stainless steel turning Excellent toughness in relation to notch wear resistance. Highly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy. yminimizing

More information

Lower Spindle Power Consumptionn

Lower Spindle Power Consumptionn ower Spindle Power Consumptionn > Five cutters for drilling Ø13~Ø50 mm. > One insert for all kind of materials. > The drilling is done by helical interpolation. (circular ramping milling) Nine9 NC Helix

More information

Universal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology TOOLING NEWS E-135

Universal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology TOOLING NEWS E-135 TOOLING NEWS E-135 New Coated Grade for General Steel Turning Universal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology Coated Grade for Steel Turning

More information

Solid carbide drill WSTAR 5XD DRILL B026A. Superior design wavy cutting edge & flute geometry

Solid carbide drill WSTAR 5XD DRILL B026A. Superior design wavy cutting edge & flute geometry Excellent multi-purpose applications from general steel to nickel based alloys A wide application range from.125 to.7812 inch. Sharp cutting edge performance and smooth chip discharge B26A Solid carbide

More information

Stable parting-off operations due to unique clamping system

Stable parting-off operations due to unique clamping system GrooveLine Tungaloy Report No. 504-US DUOJUST-CUT Stable parting-off operations due to unique clamping system ACCELERATED MACHINING GrooveLine DuoJust-Cut, a new line of small tools with a durable insert

More information

AUTOMOTIVE TAPPING ENGINEERED SOLUTIONS

AUTOMOTIVE TAPPING ENGINEERED SOLUTIONS AUTOMOTIVE TAPPING ENGINEERED SOLUTIONS Material: AlMgSi Alloys MINIMAL LUBRICATION FOR MAXIMUM RESULTS CARBIDE FORMING TAPS AL-IK Specially developed thread forming geometry and coating with the aid of

More information

NEW. Excellent tool life with new-generation PVD coating! Keeping the Customer First. New PVD coated grade for stainless steel turning

NEW. Excellent tool life with new-generation PVD coating! Keeping the Customer First. New PVD coated grade for stainless steel turning Keeping the Customer First Tungaloy Report No. 399-E New PVD coated grade for stainless steel turning NEW TUNGALOY Excellent tool life with new-generation PVD coating! TUNGALOY TUNGALOY Features Increased

More information

TOOLS NEWS B076G. Series Expansion Update

TOOLS NEWS B076G. Series Expansion Update TOOLS NEWS 2013.10 Update B076G Solid CBN Grade for Cast Iron and Sintered Alloy Good balance of wear and fracture resistance from the high-performance sintering technology. New solid CBN for improved

More information

No Super Excellent MINI ASM Type. Introducing new JP/JM coating JP4005. Ultra-high efficiency JM4060 NEW PRODUCT NEWS. Small tool diameter,

No Super Excellent MINI ASM Type. Introducing new JP/JM coating JP4005. Ultra-high efficiency JM4060 NEW PRODUCT NEWS. Small tool diameter, NEW PRODUCT NEWS No.0 Patent Pending Super Excellent INI AS Type Grade for processing high-hardness materials Grade for processing stainless-steel materials Introducing new JP/J coating Small tool diameter,

More information

Change!! Change I Change II Change III Change IV. Magic Drill DRX DRX

Change!! Change I Change II Change III Change IV. Magic Drill DRX DRX Drilling DRX Magic Drill DRX Magic Drill DRX Change!! The total product lineup is now complete! ø1~ø60 D,3D,4D,5D Change I Change II Change III Change IV New Technology: Twisted coolant hole New Concept:

More information

Drilling Tools. Common problems and solutions for drilling. Problem Cause Solution. Bend,distortion and slippage of machine and workpiece

Drilling Tools. Common problems and solutions for drilling. Problem Cause Solution. Bend,distortion and slippage of machine and workpiece Drilling Tools for solid carbide drills C Common problems and solutions for drilling Problem Cause Solution Drill breakage Bend,distortion and slippage of machine and workpiece Increase the rigidity of

More information

BASIC TECHNICAL INFORMATION FOR REAMERS FLUTE STYLES

BASIC TECHNICAL INFORMATION FOR REAMERS FLUTE STYLES BASIC TECHNICAL INFORMATION FOR HANNIBAL CARBIDE would like to inform you of some basic technical knowledge regarding reamers. Following these guidelines will reduce overall set-up time, while increasing

More information

KYOCERA Cutting Tools Drilling Catalog

KYOCERA Cutting Tools Drilling Catalog 2013 KYOCERA Cutting Tools Drilling Catalog 2013 Drilling Catalog Table of Contents KYOCERA Company Overview How to Order Kyocera Cutting Tools iv v Drilling Product Lineup & Inserts 1-2 Summary of Drilling

More information

COFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock

COFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock Deburring Tool for Elliptical or Contoured Surfaces increased performance from stock Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 The HEULE COFA deburring tool removes burrs from the front and

More information

Keeping the Customer First. Tungaloy Report No. 409-US. Indexable drill NEW. TDS type TUNGALOY. The most economical solution for drilling!

Keeping the Customer First. Tungaloy Report No. 409-US. Indexable drill NEW. TDS type TUNGALOY. The most economical solution for drilling! Keeping the Customer First Tungaloy Report No. 409-US Indexable drill NEW TDS type TUNGALOY The most economical solution for drilling! Features Double-sided insert with 6-cutting edges TungSix-Drill is

More information

Reaming. MAPAL MonoReam. Systematic versatility NEW

Reaming. MAPAL MonoReam. Systematic versatility NEW Reaming MAPAL MonoReam Systematic versatility NEW MAPAL MonoReam With the newly developed multi-bladed reamers in the 600, 700 and 800 series, MAPAL is offering a new, simple, highperformance, standardised

More information

PRODUCT INFORMATION CBN-SXR CBN-LN-SXR CBN-SXB CBN-LN-SXB. CBN End Mill Series

PRODUCT INFORMATION CBN-SXR CBN-LN-SXR CBN-SXB CBN-LN-SXB. CBN End Mill Series PRODUCT INFORMATION CBN-LN-SXR CBN-LN-SXB CBN End Mill Series The helical flutes are changing the CBN end mills! Highly Appealing OSG CBN End Mill Series Are you bothered by these issues? The work material

More information

15 Lead Angle D1~D9 MSRS15 MSE15 D2-D8 D9

15 Lead Angle D1~D9 MSRS15 MSE15 D2-D8 D9 15 1~9 15 MSE15 2~9 28 9 Heavy Milling Face Mill MonSteR M S R Square Mill Conventional Tools Metal removal rate is drastically increased Square (4edge) type Face Mill 15 Roughing takes place in one pass.

More information

TDX. Range extended with new AH725 grade, for steels and stainless steels! Highest Productivity with Maximum Performance! Concept

TDX. Range extended with new AH725 grade, for steels and stainless steels! Highest Productivity with Maximum Performance! Concept Keeping the Customer First Tungaloy Report No.021-USA TAC Drills / New TDX type TDX Concept Range of drills from ø0.500" ~ 2.00" L/D = 2xD, 3xD, 4xD, 5xD Full Line up Available! Highest Productivity with

More information

Cat.3a Super Power Drill Super Drill

Cat.3a Super Power Drill Super Drill www.jic-tools.com.tw Cat.3a Super Power Drill Super Drill WE HAVE INVESTED RESOURCES IN THE DESIGN & MANUFACTURE OF INSERTED CUTTERS Cost Saving Our innovative tooling design upgrades productivity and

More information

HIGH-PERFORMANCE, HIGH-PRECISION HOLEMAKING TOOLS SECO FEEDMAX -P & PERFOMAX

HIGH-PERFORMANCE, HIGH-PRECISION HOLEMAKING TOOLS SECO FEEDMAX -P & PERFOMAX HIGH-PERFORMANCE, HIGH-PRECISION HOLEMAKING TOOLS SECO FEEDMAX -P & PERFOMAX HARNESS THE POWER OF SECO HOLEMAKING GAIN THE TOOLS AND EXPERTISE TO OPTIMIZE PRODUCTIVITY WHAT YOU NEED TO BE YOUR BEST FEEDMAX

More information

TP2P. Tangen-Pro. Tangential Shoulder Milling Tool

TP2P. Tangen-Pro. Tangential Shoulder Milling Tool Tangen-Pro TP2P Tangential Shoulder Milling Tool This milling tool series with its tangential clamping system increases stable machining and productivity, while improving perpendicularity Superior Clamping

More information

Features. Special forms are possible

Features. Special forms are possible Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your

More information

VEX-S. Combination Drill with Front & Back Chamfering of Through Holes. tip combined with patented SNAP. chip control.

VEX-S. Combination Drill with Front & Back Chamfering of Through Holes. tip combined with patented SNAP. chip control. Combination Drill with Front & Back Chamfering of Through Holes tip combined with patented SNAP chip control blade replacement Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 HEULE is setting new

More information

NO NEED TO CHOOSE NINE9 DOES IT ALL!

NO NEED TO CHOOSE NINE9 DOES IT ALL! NO NEED TO CHOOSE NINE9 DOES IT ALL! Cat. No. 11.a NC Spot Drills Corner Rounding Cutters & Engraving Tools Various applications of NC Spot Drill We Focus: Higher efficiency Position accuracy Long tool

More information

Cutting Tools DIGEST Catalog

Cutting Tools DIGEST Catalog Cutting Tools DIGEST Catalog Insert Grade CVD Coating Innovation CA5 series Ultra fine interface increases adhesion strength to provide long tool life and stable machining High aspect ratio of α-al 2 O

More information

Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining

Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining No.011-USA April 2009 Small diameter endmills able to handle various machining modes Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining Hybrid TAC Mills provide

More information

Metal Drilling.

Metal Drilling. 101 ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of solution for every professional application. Each metal drill bit is made of high speed steel with high precision-cut

More information

Grade/Chip breaker. Contents. Grades. Chip breakers A02 A03 A04. Korloy grades system Grade selection system The feature of korloy grades A06 A08 A09

Grade/Chip breaker. Contents. Grades. Chip breakers A02 A03 A04. Korloy grades system Grade selection system The feature of korloy grades A06 A08 A09 Grade/Chip breaker Contents Korloy grades system Grade selection system The feature of korloy grades A02 A03 A04 For For For A06 A08 A09 >>> /Chipbreakers Korloy grades system Uncoated P For steel ST05

More information

SNAP. For more case studies, testimonials, and videos. We are also available on:

SNAP.   For more case studies, testimonials, and videos. We are also available on: www.heuletool.com For more case studies, testimonials, and videos We provide online tool selectors for the COF,, DEF and BSF product groups. Simply enter your application information and the correct tool

More information

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight

More information

AXD TOOLS NEWS. Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. B116E

AXD TOOLS NEWS. Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. B116E TOOLS NEWS For Machining of Aluminium and Titanium Alloys AXD 2014.01 Update B116E Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. For Machining

More information

TOOLS NEWS B216B. High Feed Finish Milling Cutter FMAX. Feed Maximum (FMAX) Milling cutter for ultra efficient and accurate finishing.

TOOLS NEWS B216B. High Feed Finish Milling Cutter FMAX. Feed Maximum (FMAX) Milling cutter for ultra efficient and accurate finishing. TOOLS NEWS B216B Feed Maximum () Milling cutter for ultra efficient and accurate finishing. By CG image Ultra high efficiency machining The ultra fi ne pitch design is ideal for high effi ciency machining

More information

Keeping the Customer First. Tungaloy Report TE1008-E5. Multi-functional endmill EVX. with centre cutting edge for plunge milling

Keeping the Customer First. Tungaloy Report TE1008-E5. Multi-functional endmill EVX. with centre cutting edge for plunge milling Keeping the Customer First Tungaloy Report TE1008-E5 Multi-functional endmill EVX with centre cutting edge for plunge milling with centre cutting edge for plunge milling Features Modern machining processes

More information

Innovative insert provides superior

Innovative insert provides superior TurnLine Tungaloy Report No. 417-US MINIFORCE-TURN Innovative insert provides superior economic advantages! ACCELERATED MACHINING TurnLine VXGU insert, new toolholders, new chipbreaker, and new grades

More information

CoroChuck 970 SynchroFlex Benefits

CoroChuck 970 SynchroFlex Benefits Benefits Better surface quality on the flanks of the cut threads Longer tool life due to less friction Greater process security Due to the reduced risk of breaking the tap especially with small dimensions

More information

CARBIDE END MILLS SPECIFICATIONS

CARBIDE END MILLS SPECIFICATIONS SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel

More information

A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY

A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY 2011 Threading Solutions for Every Industry A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY At Balax, we recognize the increased demands placed on our customers for improved quality and lower production

More information

PRODUCT NEWS PFC/MPF NEW PRODUCT. No. 303 DIJET INDUSTRIAL CO., LTD. Ø 50, Ø 63, Ø 80: 6 Items. Ø 30, Ø33, Ø 40: 3 Items. Face Mill type.

PRODUCT NEWS PFC/MPF NEW PRODUCT. No. 303 DIJET INDUSTRIAL CO., LTD. Ø 50, Ø 63, Ø 80: 6 Items. Ø 30, Ø33, Ø 40: 3 Items. Face Mill type. PRODUCT NEWS No. 303 NEW PRODUCT Face Mill type PFC/MPF Ø, Ø 63, Ø 80: 6 Items Heads type Ø 30, Ø33, Ø 40: 3 Items Up & Down From semi-finishing to super finishing on slide seat surface. High speed up

More information

DRX type New technology : twisted coolant hole

DRX type New technology : twisted coolant hole MagicDrill Change!! Drilling is changed! DRX type New technology : twisted coolant hole Improved chip evacuation performance New concept : chipbreaker Covers a variety of workpiece materials MEGCOT New

More information

Cylindrical shank version Indexable Insert Endmill

Cylindrical shank version Indexable Insert Endmill Cylindrical shank version Indexable Endmill ø1 - ø 1 ød ST-FCM1-0 -FCM- 0 -FCM0-0 ST-FCM0-0 ST-FCM0- ST-FCM- -FCM- -FCM- 1 1 ød 1 0 0 1 17 0 0 0 70 1 ARG00 ARG00 ARG00 ARG0 ARG0 CATAOG No. =The ength of

More information

Optimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.

Optimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed. Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized

More information

Understanding the basics of Spiral Pointed Taps. July 2017

Understanding the basics of Spiral Pointed Taps. July 2017 Understanding the basics the of Spiral Basics Pointed Taps of Spiral Pointed Taps July 2017 Understanding the Basics of Spiral Pointed Taps What is a spiral pointed taps? Cutting torque of spiral pointed

More information

BSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool

BSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant

More information

Milling Cutter for Heavy Roughing

Milling Cutter for Heavy Roughing 15 15 Milling Cutter for Heavy Roughing Notched insert reduces cutting force, chattering and enables efficient cutting. Large depth of cut and high feed rate enable high effi ciency cutting. TZE00047 changes

More information

Special reamers. Figure N 1 Reamer with descending cutting edges in carbide (Cerin)

Special reamers. Figure N 1 Reamer with descending cutting edges in carbide (Cerin) Special reamers There is a wide category of special reamers, ie non-standard, that are suitable to address particular problems encountered in the finishing holes, both for maintenance of individual pieces

More information

Solid Carbide Thread Milling Cutters

Solid Carbide Thread Milling Cutters Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than

More information

Product Lineup MagicDrill DRC

Product Lineup MagicDrill DRC 1~62 Product Lineup MagicDrill DRC SS-DRC Depth: 3 D type Straight Shank 7 SS-DRC Depth: 5 D type Straight Shank 8 SS-DRC Depth: 8 D type Straight Shank 9 Chamfering attachment For Straight Shank SS-DRC

More information

NPA. Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts. New Product Announcement. Page 1 / 9

NPA. Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts. New Product Announcement. Page 1 / 9 NPA Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts Page 1 / 9 Page 2 / 9 Highlights Tools carrying triangular inserts with 5 mm helical cutting edges Effective and

More information

Indexable endmill for high precision finishing

Indexable endmill for high precision finishing MillLine Tungaloy Report No. 431-US BALLFINISH-NOSE Indexable endmill for high precision finishing ACCELERATED MACHINING MillLine Excellent surface finish and stable machining due to secure clamping and

More information

Mission Statement. 2005, Manchester Tool Company. All rights reserved.

Mission Statement. 2005, Manchester Tool Company. All rights reserved. Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated

More information

Product Information Report Maximizing Drill Bit Performance

Product Information Report Maximizing Drill Bit Performance Overview Drills perform three functions when making a hole: Forming the chip The drill point digs into the material and pushes up a piece of it. Cutting the chip The cutting lips take the formed chip away

More information

Quick Change Carbide & Steel Boring Bar Instructions Manual

Quick Change Carbide & Steel Boring Bar Instructions Manual Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When

More information

Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools

Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools JANUARY Page 1 / 7 Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools JANUARY Page 2 / 7 Highlights ISCAR is introducing new tools which can carry the current multifunction XCMT-MF

More information

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing

More information

Non-chattering Side Cutter

Non-chattering Side Cutter TOOLS NEWS Exchangeable Inserts Side Cutter Series B242G New Product Non-chattering Side Cutter Vertical blade double-sided insert VAS0 VAS0 VOS0 ASX0 1 Classified Side cutter VAS0 VOS0 ASX0 Features of

More information

Features. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical

Features. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide

More information

Automotive. Tooling Solutions. Providing Optimal Tooling Solutions for Automotive Machining

Automotive. Tooling Solutions. Providing Optimal Tooling Solutions for Automotive Machining Automotive Tooling Solutions Providing Optimal Tooling Solutions for Automotive Machining Crankcase Cylinder Heads Crankshafts Camshafts Connecting Rods Valve Bodies Synchronizer Gears Main Shafts CVT

More information

Allied Maxcut Engineering Co. Limited. Making a difference. Reamers.

Allied Maxcut Engineering Co. Limited. Making a difference. Reamers. EN Allied Maxcut Engineering Co. Limited Making a difference Reamers www.alliedmaxcut.com Allied Maxcut (AMEC ) is the European Headquarters of Allied Machine & Engineering Corporation USA, a global leader

More information

In hall 4, stand A42, you can experience Intelligence in Production. The following trade show highlights can be seen at EMO:

In hall 4, stand A42, you can experience Intelligence in Production. The following trade show highlights can be seen at EMO: Guhring at EMO 2013 Intelligence in Production with precision tools from Guhring In the spirit of the motto of this year s EMO, from 16th to 21th September in Hanover, Guhring is introducing trendsetting

More information

MIROKU MACHINE TOOL, INC.

MIROKU MACHINE TOOL, INC. MIROKU MACHINE TOOL, INC. MIROKU GUNDRILL MIROKU STOCK GUNDRILL LIST World famous Miroku can be delivered immediately. Custom-sized Drills are available within one month after order. Sufficient tool inventory

More information

Parting & Grooving: How to achieve greater performance, quality, and tool life in the 21st century

Parting & Grooving: How to achieve greater performance, quality, and tool life in the 21st century Technical article May 2015 Parting & Grooving: How to achieve greater performance, quality, and tool life in the 21st century Production engineers faced with overcoming the challenges of parting and grooving

More information

Technical Information for Power Buster

Technical Information for Power Buster Technical Information for ower Buster Recommended cutting condition ISO Workpiece NC5330 NC335 0.0040.008 0.0040.008 0.0040.008 vg(sfm) High speed NC5330 NC335 Carbon steel 919755591 820656525 755591492

More information

Cutting with broach. You can find here some notices about broaching operation. Fig.N 1

Cutting with broach. You can find here some notices about broaching operation. Fig.N 1 Cutting with broach You can find here some notices about broaching operation. Fig.N 1 Amount of cut per tooth This parameter depends on many characteristic of broaching operation like: Material of the

More information

Automotive solutions for ISO K

Automotive solutions for ISO K Automotive solutions for ISO K When machining in ISO K materials, you need tough tools that can withstand high abrasive wear and frittering, and deliver secure and precise machining again and again. This

More information

Keeping the Customer First Tungaloy Report No. 369-J Tungaloy Report No. 372-US Face milling cutter NEW New grades TEN / EEN type extended version

Keeping the Customer First Tungaloy Report No. 369-J Tungaloy Report No. 372-US Face milling cutter NEW New grades TEN / EEN type extended version Keeping the Customer First Tungaloy Report No. 369-J 37-US cutter NEW TEN / EEN type New grades extended version Highly productive and economical face milling cutter! T UNGALOY Features Double sided pentagonal

More information

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated

More information

HC Hydraulic Expansion Chucks

HC Hydraulic Expansion Chucks Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed

More information

Precision Cutting Tools RE-GRINDING AND RE-COATING SERVICE

Precision Cutting Tools RE-GRINDING AND RE-COATING SERVICE Precision Cutting Tools RE-GRINDING AND RE-COATING SERVICE Price List 2017 Maximum economic efficiency thanks to refurbishing to original quality Even the most resilient tool will wear at some time when

More information