Safety First! Use eye protection, always! Use ear protection with loud power tools. Stay with children while they work!
|
|
- Clementine Bell
- 6 years ago
- Views:
Transcription
1 TM TM CAMP STOOLS
2 Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with children while they work! Follow tool manufacturers safety guidelines Page 1
3 TOOLS Handsaw Clamp or Vise Drill drill bit - 1/4 inch [0.64 cm] Scissors Tape measure Pencil Jobs for kids and adults together Adult-only jobs Page 2
4 SUPPLIES PVC Schedule 40, ¾-inch pipe: 1-10 long pipe [ cm x 1.90 cm] Cut 2 pieces at 8 [20.32 cm] Cut 2 pieces at 10 [25.40 cm] Cut 4 pieces at 15 [38.10 cm] 8-3/4 elbow-joints [1.90 cm] Other Supplies: 2 - ¼ x 3 carriage bolts [0.635 cm x 7.62 cm] 2 - ¼ wing nuts [0.635 cm] 2 - ¼ washers [0.635 cm] Cloth or landscape fabric - 8 x 17 [20.32 cm x cm] Assorted duct tape grit sandpaper or sanding sponge Page 3
5 CAMP STOOL Page 4
6 CARRIAGE BOLTS Page 5
7 1. Clamp First, clamp a length of pipe to your work surface or use a vise to secure it. 2. Measure Measure and mark the pipe according to the cut list specified on Page Cut Now cut the pipe using a Japanese style hand saw, which cuts on the pull stroke so it never binds or buckles. And it s fast! 4. Sand Remove any rough edges with a bit of sandpaper. Page 6
8 5. Remove stamped-on lettering (optional) PVC pipe comes with lots of lettering stamped on the surface. If you want to remove it, just sand it off. 6. Mark Measure and mark the centre of each of the four 15-inch [38.10cm] pipes. 7. Drill Drill a ¼ [0.635 cm] hole through the top side of the pipe and continue drilling until the drill bit penetrates the bottom side of the pipe as well. Tip To prevent the drill bit from skating around on the curved surface of the pipe, use an awl to make a dimple in the pipe s surface, or use a brad-point bit, which has an extra-sharp tip. Page 7
9 8. Finish drilling Continue drilling holes through all four of the longer pieces of pipe. 9. Assemble Test fit the pieces by assembling them into two rectangles. All of the sides should be parallel. 10. Check fit The smaller rectangle should pass through the larger one. 11. Cut To make the seat for your camp stool, cut a piece of cloth or landscaping fabric 8" x 17" [20.32 cm x cm]. Page 8
10 TIP If you have a sewing machine you can sew a seat from canvas instead of making one from duct tape. Just turn and sew a 2- inch (5.08 cm) hem on the short ends to hold the pipes. 12. Tape Add layers of duct tape on both sides of the cloth or landscaping fabric to make a durable seat. 13. Reinforce Add extra lengths of tape along all four sides to reinforce and finish the edges. 14. Hem Fold a 2-inch (5.08 cm) hem at each end of the seat and apply several layers of tape to secure the hems in position. Page 9
11 15. Install seat Slide the duct tape seat into position on the top rails. 16. Tighten Make sure all fittings are nice and tight. 17. Fasten Install the bolts, adding a washer on the inside surface and then a wingnut. Start stooling around! Page 10
12 Page 11
13 DISCLAIMER Almost any do-it-yourself project involves risk of some sort. Your tools, materials, and skill will vary, as will the conditions of your project site. Lowe s Companies Inc., and its subsidiaries ("Lowe s") have made every effort to be complete and accurate in the instructions and other content contained in this publication. However, neither Lowe s nor the publisher will assume any responsibility or liability for damages or losses sustained or incurred in the course of your home improvement or repair project or in the course of your use of the item you create or repair. Always follow the manufacturer s operating instructions in the use of tools, check and follow your local building codes, and observe all standard safety precautions. Prices and supply may vary, so check the cost of materials and labour in your area before beginning any home improvement project. We strive to be accurate, but unintentional errors may occur and we reserve the right to correct any error. See a Lowe s store for information regarding product warranties and any available protection plans. All prices, products and promotions are limited to Canada locations only. This Family Fun video is for informational purposes only. Lowe s assumes no responsibility for the accuracy of the information contained herein and disclaims any liability for omissions, errors or the outcome of any project. Lowe s assumes no responsibility or liability for damages, losses, or injuries sustained in the course of your project or in the course of your use of any item you repair or create. Always follow the manufacturer s operating instructions in the use of tools, and take proper safety precautions when taking on any project. It is your responsibility to ensure that participants engage in age-appropriate activities and that children are appropriately supervised. If there is any question or doubt with regard to any element of a project, please consult with a licensed professional. No part of this video may be reproduced in any form or by any means without prior written permission of Lowe s. Lowe s, the gable design, and Lowe s Family Fun Projects and Learning Through Building are trademarks of LF, LLC. All rights reserved. Page 12
Safety First! Use eye protection, always! Use ear protection with loud power tools. Stay with children while they work!
TM TM WORK BENCH Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with children while they work! Follow tool manufacturers safety guidelines Page 1 TOOLS Handsaw
More informationTM TM TM TM BOOK SLING
TM TM TM TM BOOK SLING BOOK SLING Page 1 Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with children while they work! Follow tool manufacturers safety guidelines
More informationSafety First! Use eye protection, always! Use ear protection with loud power tools. Stay with children while they work!
TM TM ART TABLE Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with children while they work! Follow tool manufacturers safety guidelines Page 1 ART TABLE Page
More informationSafety First! Use eye protection, always! Use ear protection with loud power tools. Stay with children while they work!
TM BIRD FEEDER TM Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with children while they work! Follow tool manufacturers safety guidelines Page 1 TOOLS Safety
More informationGROWTH CHART. Page 2
TM TM GROWTH CHART GROWTH CHART Page 2 Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with children while they work! Follow tool manufacturers safety guidelines
More informationTM TM DOG HOUSE Age 9+
TM TM DOG HOUSE Age 9+ Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with kids while they work! Follow tool manufacturers safety guidelines This project is recommended
More informationTM TM MESSAGE CENTRE
TM TM MESSAGE CENTRE Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with children while they work! Follow tool manufacturers safety guidelines Page 1 TOOLS Drill
More informationDIY RUSTIC HALL TREE
DIY RUSTIC HALL TREE *Before beginning this project, please read through all of the plans as well as the blog post associated with this project. Always use safety precautions whenever using power tools
More informationATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
VAN STORAGE SOLUTIONS FOR THE WAY YOU WORK TM INSTALLATION MANUAL BULKHEAD Model Number 96101-3-01 ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING
More informationPROJECT PLANS OUTDOOR SERVING CART
R PROJECT PLANS OUTDOOR SERVING CART Make outdoor entertaining easy with this serving cart. It offers lots of space for storing food, tableware, and outdoor supplies, plus it cradles bottles where they
More informationPROJECT PLANS EXPANDABLE CRAFT CENTER
R PROJECT PLANS EXPANDABLE CRAFT CENTER Whether you re working on craft projects, sewing, or pursuing another hobby, this craft center offers a great place to work. It features a large work surface that
More informationHow-to-Install. Laminate Countertops and Sheet Laminate. FREE brochure Reverso en español
FREE brochure Reverso en español How-to-Install Laminate Countertops and Easy to install instructions provided inside Multiple colors available for unique design options Durable and easy to care for Accessory
More informationInstallation of Balustrade Systems
Installation of Balustrade Systems IMPORTANT: Be sure to mark the center point of each newel post's location prior to installation to insure proper spacing. All product interfaces must use PL Premium Adhesive
More informationMachine Quilting Frame assembly, and instruction manual
Machine Quilting Frame assembly, and instruction manual Table of Contents Parts List................. Pg. 2 Step 1 - Legs............... Pg. 4 Step 2 - Lower Leg Brace....... Pg. 5 Step 3 - Frame Ends..........
More informationLeafy Greens Spinner Construction Manual
Leafy Greens Spinner Construction Manual University of Houston Conrad N. Hilton College Food Science Lab Materials list: Base and Armature Approximately 8-1 PVC cut into sections o 3-22.5 o 2-7 o 2-4 o
More informationMotorcycle Lift Assembly Instructions
Motorcycle Lift Assembly Instructions Copyright JCS 2009 Rev1M Page 1 Lift Table Assembly Instructions The following pages will assist you in the construction of your Motorcycle Lift Table. You will find
More informationGuard Rail with In-Fill Panel
Assembly Instructions Guard Rail for Wenger Versalite TM TM, Trouper, Stagehand, Portamaster, Showmaker Platform Systems Guard Rail with In-Fill Panel CONTENTS Important User Information...........................................................................
More information26 GARDEN CART ASSEMBLY & OPERATING INSTRUCTIONS. Rev 07/03
GARDEN CART 304 ASSEMBLY & OPERATING INSTRUCTIONS 3 Rev 07/03 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner s record below: Model Serial No. Purchase
More informationContinuous Handrail Kit Installation Instructions
Continuous Handrail Kit Installation Instructions ALUMINUM RAILING SYSTEM Canadian Version Wall Application (see page 2) Railing Application (see page 7) Wall anchors not provided Hardware included: 1x
More informationHUNTER GREEN ADIRONDACK CHAIR
HUNTER GREEN ADIRONDACK CHAIR 92460 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web Site at www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights
More informationClearSpan End Frame Kit 30' Wide x 11' High
ClearSpan End Frame Kit 30' Wide x 11' High Diagram shows the end frame kit for an end wall without a door. (Door and end panel are purchased separately.) Rafter and mounting feet shown in the above diagram
More informationPROJECT PLANS PATIO PLANTER BOX
PROJECT PLNS PTIO PLNTER BOX This great-looking planter makes the perfect place for your favorite plants and flowers. It s sized to hold an 18" round plastic pot, which you can pick up in any garden center.
More informationBI-METAL HOLE SAWS FOR ELECTRICIANS (MODEL 93420) FOR PLUMBERS (MODEL 93421) 9 PCS. IN EACH SET ASSEMBLY & OPERATING INSTRUCTIONS
BI-METAL HOLE SAWS FOR ELECTRICIANS (MODEL 93420) FOR PLUMBERS (MODEL 93421) 9 PCS. IN EACH SET 93420 93421 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly
More informationPROJECT PLANS ROLLING LAUNDRY SORTER
R PROJECT PLANS ROLLING LAUNDRY SORTER Sorting laundry certainly doesn t rank high on anyone s list. So, anything that makes this task easier is welcome. If that functionality can be mixed with a bit of
More information(28) 2 x 4 x 8 Ft. Boards Tape Measure (9) 2 x 6 x 8 Ft. Boards Pencil (6) 2 x 2 x 8 Ft. Boards Carpenter s Square (9) 1 x 3 x 8 Ft.
MATERIALS: TOOLS: (28) 2 x 4 x 8 Ft. Boards Tape Measure (9) 2 x 6 x 8 Ft. Boards Pencil (6) 2 x 2 x 8 Ft. Boards Carpenter s Square (9) 1 x 3 x 8 Ft. Boards Drill 2 ½-inch Pocket Screws Circular Saw 2
More informationUni-Cross Universal Transmission Crossmember
Uni-Cross Universal Transmission Crossmember Installation Guide Applications: Fits 1965-1970 Mustang READ THIS MANUAL IN ITS ENTIRETY PRIOR TO BEGINNING INSTALLATION Ford Performance Specialist 1001 Reno
More informationFENDER FLARE INSTALLATION
Customer Support TM FENDER FLARE INSTALLATION TG-FF8C4108 IMPORTANT TYGER only approves the installation according to our instructions with the hardware provided. WARNING Failure to complete the installation
More informationPROJECT PLANS WOODEN GIFT BOX
PROJECT PLANS WOODEN GIFT BOX Make the gifts you give even more special by presenting them in this one-of-a-kind gift box. In fact, the box may be valued more than whatever it contains. The box is sized
More informationAdjustable Hammered Dulcimer Stand
Adjustable Hammered Dulcimer Stand Musicmaker s Kits (Hwy 36 behind Joseph s Restaurant) P.O. Box 2117 Stillwater MN 55082 651 439 9120 www.harpkit.com PARTS LIST: 1 Set of Assembly Instructions A. 2 front
More informationAfter the canopy hinge is square with the firewall and the nut plates are installed you can set up the hinge mounts. Start by clamping a 1/16 tongue
Written by: Sean Cole September 19, 2008 When fitting the stiffener use 3/32 clecos to hold it in place, it makes a smaller hole and is easier to work with. Only use the amount needed to hold the stiffener
More informationClearSpan PolyMax Windbreak Wall
ClearSpan PolyMax Windbreak Wall Photo may show a different but similar model. 2007 ClearSpan All Rights Reserved. Reproduction is prohibited without permission. Revision date: February 2007ldg STK# DIMENSIONS
More information9 QUICK RELEASE WOODWORKING VISE
9 QUICK RELEASE WOODWORKING VISE 94386 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo, CA
More informationPROJECT PLANS BATHROOM WALL SHELF
R PROJECT PLANS BATHROOM WALL SHELF Just about everybody needs more bathroom storage space, but it s one of the most-challenging rooms in the house to fit another item into. This wallmounted shelf makes
More informationSignature Choral Riser Side Rail
Assembly/Owner s Manual Signature Choral Riser Side Rail Signature Choral 3-Step Riser with Optional Side Rail Signature Choral 4-Step Riser with Optional Side Rail CONTENTS Visit the Signature Choral
More informationKit Includes: 4 Door Jeep Wrangler: Marker Tape Drill. 1 Left Door Check Strap/Arm 1 Left Hinge Plate 1 Right Door Check Strap/Arm
Smart Door Installation Instructions PRODU UCT INSTALL LATION GUI IDE Prior to beginning this or any installation, completely read these instructions to familiarize yourself with the required steps and
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone:
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
More informationHOW TO MAKE A WINE BARREL SMOKER
HOW TO MAKE A WINE BARREL SMOKER THINGS YOU LL NEED: Empty wine barrel 80 & 220 grit sandpaper Eye protection 150 pan head screws Building tape (optional) Pencil Electric drill & forstner attachment Skill
More informationTURBOTWISTER TM ASSEMBLY AND INSTALLATION INSTRUCTIONS
TURBOTWISTER TM ASSEMBLY AND INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 Phone: (503) 266-2231 Fax: (503)
More informationWorkbench with peg board & drawer
Workbench with peg board & drawer Model 95387 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. Tools not included.
More informationBuilding dimensions supplied by the #1 supplier of cornhole bags and boards on the internet.
Building dimensions supplied by www.cornhole-game.org, the #1 supplier of cornhole bags and boards on the internet. SUPPLIES QUANTITY (1) ½ FIBERBOARD (PLYWOOD) SHEET - 4 X 8 (3) 2 X 4 BOARDS - 8 LONG
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Flat Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
More informationTURBOTWISTER ASSEMBLY AND INSTALLATION INSTRUCTIONS
TURBOTWISTER ASSEMBLY AND INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 Phone: (503) 266-2231 Fax: (503) 266-4334
More informationMedia Storage Systems Fixed Media Cabinets
Owner s Manual Media Storage Systems Fixed Media Cabinets Contents 1-Column Fixed Media Storage Cabinet Important User Information...........................2 Safety Precautions.................................3
More informationDeckRail A Product of DeckRite LLC 3912 East Progress North Little Rock, AR Phone: (501) Fax: (501)
Deck Rite Welded Picket Railing Installation Guide Disclaimer: This guide is not intended to replace a trained professional installer. The drawings and instructions contained within are for demonstration
More informationThe Ultimate Guide To Creating A Wind Turbine
The Ultimate Guide To Creating A Wind Turbine DISCLAIMER These guides and videos have been designed to help others to help create alternative energy by showing how to create a wind turbine. Every effort
More informationGrade 8 Enriched Math Catapult Project 2012 Step by Step Instructions to building a catapult
Grade 8 Enriched Math Catapult Project 2012 Step by Step Instructions to building a catapult Grade 8 Enriched Math Project INSTRUCTION SHEET FOR CATAPULT Procedures, materials and tools: below is a step-bystep
More informationPLATE JOINER 4 INCH. ASSEMBLY and OPERATING INSTRUCTIONS. Distributed Exclusively by Harbor Freight Tools
PLATE JOINER 4 INCH 38437 ASSEMBLY and OPERATING INSTRUCTIONS Distributed Exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights
More informationCONTINUED. TABLE TOPS: 1. Sort one 2x6x8 piece from your lumber. 2. Measure and mark two 48 pieces from each, then cut.
# Materials: Quantity Each: Total Quantity: x4x8 7 x6x8 1 TIPS FOR SUCCESSFUL PREP WORK: Before starting, carefully read through the entire instruction sheet. Refer to the material list to the left and
More informationClearSpan PolyMax Windbreak Wall
ClearSpan PolyMax Windbreak Wall Photo may show a different but similar model. 2007 ClearSpan All Rights Reserved. Reproduction is prohibited without permission. Revision date: April 2007ldg STK# DIMENSIONS
More informationRetrofit Apron Front Farm Sink With Dual Mount Capability Installation Instructions
For Under-Mount Installation please refer to page 14 FOR EXPERIENCED AND PROFESSIONAL INSTALLATION ONLY This installation project is designed for an advanced skill level. Disclaimer: Undermount Application
More informationSINKS AND LAVATORIES. Steps to completion: These items are essential for installing all sinks:
DUPONT CORIAN SOLID SURFACE FABRICATION/INSTALLATION FUNDAMENTALS NA/ENGLISH SINKS AND LAVATORIES INTRODUCTION This bulletin discusses installing DuPont Corian solid surface sinks and lavatories. OVERVIEW
More informationWork Space Set-up. Slats will level the pipe during bending and help minimize twisting of the bow.
Work Space Set-up Affix pipe bender to end of working surface Slats will level the pipe during bending and help minimize twisting of the bow. Make the slat height equal the distance from your work surface
More informationEASY BREAD/ CUTTING BOARDS
PLANS BY DEEPLY SOUTHERN HOME EASY BREAD/ CUTTING BOARDS DIFFICULTY LEVEL: EASY TOOLS REQUIRED 18V ONE+ RANDOM ORBIT SANDER 18V ONE+ CORNER CAT FINISH SANDER 18V ONE+ LITHIUM-ION DRILL KIT 18V ONE+ ORBITAL
More informationPerformance Predicted by YAGI-CAD
1 of 7 11/16/2010 2:02 PM Joe Leggio WB2HOL Description This antenna evolved during my search for a beam with a really great front-to-back ratio to use in hidden transmitter hunts. This design exhibits
More informationIn-Wall Pool Step Assembly Instructions
In-Wall Pool Step Assembly Instructions BE SURE TO READ ALL INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. This instruction sheet is to be used in conjunction with the pool assembly guide included with
More informationBig Sweep Lathe Dust Catcher System
Big Sweep Lathe Dust Catcher System Version.0 Disconnect saw from power source before fitting or removing insert. Ear Protection proper ear protection when working with machinery. Use caution when handling
More informationClearSpan End Frame Kit 26' Wide x 12' High
ClearSpan End Frame Kit 26' Wide x 12' High Diagram shows the end frame kit for an end wall without a door. (Door and end panel are purchased separately.) Rafter and struts shown in the above diagram are
More informationFSCTD Dual Back to Back Flat Screen Ceiling Mount
Page 1 of 6 FSCTD Dual Back to Back Flat Screen Ceiling Mount The FSCTD Dual Back to Back Flat Screen Ceiling Mount is designed to suspend a monitor from a single flange mounted to structure in the ceiling.
More informationSort 4 (four) 2x6x12 pieces and cut to 126 1/2" for a total of 4 (four) 126 1/2" pieces.
# Materials: Quantity Each: Total Quantity: xx8 6 x6x8 1 x6x1 1 TIPS FOR SUCCESSFUL PREP WORK: Before starting, carefully read through the entire instruction sheet. Refer to the material list to the left
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS P4263F Universal Low Profi le Flat Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888
More informationSTOP 36" SPIKE AERATOR. Owner's Manual. Model No Safety Assembly Operation Maintenance Parts
Owner's Manual STOP 36" SPIKE AERATOR Model No. 46.243361 DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-66-576-3 CAUTION: Before using this product, read this manual and follow
More informationHAND HELD SAW W MILL
HAND HELD SAW W MILL 92247 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All
More informationTools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File. 2. Cut the stock Place stock in vise and cut with hack saw
Purpose: MAKE CATAPULT ARM Step 1 Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File Materials: Flat aluminum ½ inch stock (see picture below) Gloves required 1. Pick up the aluminum ½
More informationInstalling A Carver Bimini Top
Installing A Carver Bimini Top How To Prolong The Life Of Your Bimini Top Carver Bimini Tops are a classy way to protect yourself and your boat from the elements. They also add style and color to your
More informationAWNING / PATIO COVER INSTALLATION INSTRUCTIONS
AWNING / PATIO COVER INSTALLATION INSTRUCTIONS Before You Begin Read the installation instructions thoroughly before beginning the installation procedure. Perspective In the Awning Instructions, Back means
More informationFSM / FULL SWING WALL MOUNT. For Flat Panel Screens. User Manual
FSM- 2742 / FULL SWING WALL MOUNT For 27-42 Flat Panel Screens User Manual Thank you for choosing Gabor. Thank you for choosing Gabor s full swing flat panel screen wall mount. This heavy-duty wall mount
More informationPROTECT-A-POOL INGROUND REMOVABLE SAFETY FENCE
PROTECT-A-POOL INGROUND REMOVABLE SAFETY FENCE I N S T A L L A T I O N I N S T R U C T I O N S INSTALLATION TOOLS The following tools are required for installation. Chalk Pencil Utility Knife Tape Measure
More informationSliding Door Kit
YOU MUST READ THIS DOCUMENT BEFORE YOU BEGIN TO ASSEMBLE THE DOOR KIT. Thank you for purchasing this GrowSpan door kit. When properly assembled and maintained, this product will provide years of reliable
More informationOne piece folding Bench and Picnic Table by Les Kenny
1 1 2 2 Updated Sept/2014 The author Les Kenny is a retired building contractor. Two "DIY for Kids" books (co-authored with his daughter Roseanne) published in 2004 and 2005 respectively got him started
More informationi sburgh COMPACT BENDER ASSEMBLY INSTRUCTIONS & PROJECT IDEAS Rev 08/00
i sburgh COMPACT BENDER 31980 ASSEMBLY INSTRUCTIONS & PROJECT IDEAS 2000 Rev 08/00 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner s record below:
More informationMACHINE QUILTING FRAME
MACHINE QUILTING FRAME YOU WILL NEED TO PURCHASE: 5 pieces of 1-1/4 thin wall metal conduit (EMT) cut to your preferred length for the rollers. (Maximum 120 ) DETERMINING YOUR ROLLER LENGTH: Determine
More informationStorage Master. Shed Row. Poly Buildings
Storage Master Shed Row Poly Buildings Instructions Manual Building #104598 2005 ClearSpan All rights reserved. Reproduction prohibited without permission. Rev: 24 February 2005 2 PARTS IDENTIFICATION
More informationHEIGHT ADJUSTABLE WORKBENCH
HEIGHT ADJUSTABLE WORKBENCH Model 91 ASSEMBLY and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in
More informationMaking Simple Bookbinding Equipment
Tony Firman 20 1 2 19 Notes Tony Firman Tony Firman Bookbinding 18 3 : 2012 Tony Firman Bookbinding P.O. Box 507 Haslet, TX 76052 www.tonyfirmanbookbinding.com 4. When all the tapes have been pinned in
More informationPowered by. For further installation assistance: prxperformance.com/pages/murphy-rack
Powered by The 90 Fold-in Murphy Rack is made by the creators of the original Profile Folding Rack at PRx Performance and is Patent Pending. An up-to-date record of patents and patent pending items can
More information3 IN 1 HEAVY DUTY TILE CUTTER. Model Visit our website at:
3 IN 1 HEAVY DUTY TILE CUTTER Model 41711 ASSEMBLY Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in
More informationInstallation Instructions - Model V4JSD 1
Installation Instructions - Model V4JSD 1 Support Assemblies: Parts list: (Note see enclosed cut sheet for quantities and dimensional information) A vertical structural member (1 ½ x 1 ½ modular frame)
More information18 PIECE HOLE SAW SET
18 PIECE HOLE SAW SET 94665 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationBuild a Bigger Kid's Picnic Table
posted by Ana White [1] Designed to fit bigger kids, this super sturdy picnic table is big enough to sit a small adult too! Super easy to build design has been built hundreds of times already! Special
More informationSelect Lab Fixed Height Workstation
Assembly Instructions Select Lab Fixed Height Workstation Contents Important User Information.............................. 2 Safety Precautions.................................... 3 Required Tools........................................
More informationA701 ( <00>) 12 mm (7/16 in.)
A701 (6904-002018 ) Wood Stud 12 mm (7/16 in.) 2.4 mm (3/32 in.) 6 mm (15/64 in.) 3 mm (1/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988
More informationModel ADJUSTABLE ROLLER STAND WITH THREE-LEG SUPPORT
ADJUSTABLE ROLLER STAND WITH THREE-LEG SUPPORT Model 46086 ASSEMBLY and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to
More informationAssembly Instructions
18' W x 10' H or 12' H Peak Style Frame Assembly Assembly Instructions Before you start: 2+ individuals recommended for assembly, approximate time 3 hours. Recommended tools: Power Drill, Safety Glasses,
More informationFord F150 Rear Flares Set Part # Revision
Ford F150 Rear Flares Set Part # 20074 Revision 1 04-01-09 Step 1: Prior to Installation: A) Bushwacker only approves installing the flares according to these written instructions with the hardware provided.
More informationME 120: Introduction to the Milling Machine
Introduction to the Milling Machine DISCLAIMER The content of this presentation is for informational purposes only and is intended only for students attending. The author of this information does not make
More informationSILVERBACK INSTALLATION MANUAL
SILVERBACK INSTALLATION MANUAL R-SERIES SOLAR RACKS T OLL FREE 866-766-3727 WWW.ROOFSCREEN.COM Introduction... 2 The Silverback Solar Racking System... 2 This manual... 2 Application... 2 System Overview...
More informationClearSpan Front Roll-Up Kit Installation Guide
ClearSpan Front Roll-Up Kit Installation Guide Roll-up panel opened. Roll-up panel closed. Actual building and panel may differ from what is shown. 2008 ClearSpan All Rights Reserved. Reproduction is prohibited
More informationDYI shelter enrichment items
DYI shelter enrichment items Toys out of paper towel or toilet paper rolls: TP ball: Cut four pieces of paper towel roll about ½ to ¾ inch thick. Then make into a ball by slipping them together making
More informationClearview Railing System Installation Instructions
Clearview Railing System Installation Instructions Disclaimer: AGS Stainless, Inc. has its Clearview Railing Systems designed by a professional engineer to meet the requirements of the latest national
More information31 / 39 / 59 Basin 31 / 39 / 59 Basin Frame Introduction Parts supplied - basin frame
31 / 39 / 59 Basin US-WF0813SCW / US-WF1003SCW / US-WF1503SCW 31 / 39 / 59 Basin Frame US-WF80X81C / US-WF100X81C / US-WF150X81C Installation Instructions Introduction Parts supplied - basin frame All
More informationVEUE PIVOT ARM INSTALLATION MANUAL. February 2017
VEUE PIVOT ARM INSTALLATION MANUAL February 2017 CONTENTS February 2017 This manual is to be read in conjunction with the Product Specifications & Assembly manual SECTION NO. DESCRIPTION PAGE NO. SECTION
More informationDUST COLLECTOR 70 GALLON, 2 HP
DUST COLLECTOR 70 GALLON, 2 HP Model 45378 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight
More informationEZ SQUARE BANDSAW FENCE Instructions
EZ SQUARE BANDSAW FENCE Instructions Peachtree Woodworking Supply Inc. 6684 Jimmy Carter Blvd. Norcross GA 30071 The EZ SQUARE BAND SAW FENCE Table of Contents TABLE OF CONTENTS SAFETY GUIDELINES PARTS
More informationCeiling mount for BW1 THEATRE Concept (R ) INSTALLATION MANUAL. Part. No.: R Date: Rev: 01
Ceiling mount for BW1 THEATRE Concept (R9852065) INSTALLATION MANUAL www.cineversum.com Date: 10112008 Rev: 01 Part. No.: R599769 Assembly Instructions: This product is designed to be used in private homes.
More informationSMALL GAUGE NIBBLER ASSEMBLY & OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web Site at
SMALL GAUGE NIBBLER 91739 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights reserved.
More informationIn-Wall Pool Step Assembly Instructions BE SURE TO READ ALL INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION.
In-Wall Pool Step Assembly Instructions BE SURE TO READ ALL INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. DO NOT USE STEP IF THE NO DIVING DECAL IS NOT APPLIED. CONTACT CUSTOMER SERVICE AT 1-877- 228-4586
More informationLC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns
LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns Multi-position triple pivoting arms allows you to position the monitor
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationBoxtrot. Tools. Materials:
Boxtrot Sneak downstairs with a little nog and chisel yourself a nice box to hold your New Year's resolutions. Materials: Cut List: 3/8" plywood - preferably high grade, seven-ply, cabinetmakers plywood
More information