Installation and Assembly:
|
|
- Sherilyn Norton
- 6 years ago
- Views:
Transcription
1 Installation and ssembly: Model: DS508 os pd For SHPD installations, please contact Peerless Customer Service for a copy of the P. Maximum Load Capacity: 200 lb (90.7 kg) 2300 White ak Circle urora, IL (800) Fax: (800) ISSUD: SHT #:
2 IMPRTNT! Read instruction sheet before you start installation and assembly. Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Peerless customer care at , for all international customers, please contact your local distributor. This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions. Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. Never exceed the Maximum Load Capacity. See page one. If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an "edge to edge" stud fi nder is highly recommended. lways use an assistant or mechanical lifting equipment to safely lift and position equipment. Tighten screws fi rmly, but do not overtighten. vertightening can damage the items, greatly reducing their holding power. This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury. This product was designed to be installed on the following wall construction only; WLL CNSTRUCTIN Wood Stud Wood eam Solid Concrete Cinder lock Metal Stud rick ther or unsure? Tools Needed for ssembly stud fi nder ("edge to edge" stud fi nder is recommended) phillips screwdriver drill /4" (6 mm) bit for concrete and cinder block wall 5/32" (4 mm) bit for wood stud wall level 6 mm allen wrench Table of Contents WRNING HRDWR RQUIRD Contact Qualifi ed Professional Contact Qualifi ed Professional Parts List...3 Installation to Double Wood Stud Wall...4 Installation to Solid Concrete or Cinder lock...5 Installation to Metal Stud Wall...6 ttaching dapter Plate to Screen...8 ttaching dapter Plate to Wall Plate of 9 ISSUD: SHT #:
3 efore you begin, make sure all parts shown are included with your product. Parts may appear slightly different than illustrated. Parts List Description Qty. Part # wall plate adapter plate C #4 x 2.5" wood screw 4 5S-05-C03 D concrete anchor M8 x 5 mm socket pin screw F M4 x 2 mm phillips screw G M5 x 2 mm phillips screw H M6 x 2 mm phillips screw I M0 x 5 mm socket screw J #8 S flat washer K 3/4" x 3/6" x 0" adhesive strip L cable tie M 4 mm security allen wrench N /4-20 x 2.5" phillips screw /4" S washer P toggler C D F G H I J K L M N P 3 of 9 ISSUD: SHT #:
4 Installation to Double Wood Stud Wall WRNING Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. Tighten wood screws so that wall plate is fi rmly attached, but do not overtighten. vertightening can damage the screws, greatly reducing their holding power. Never tighten in excess of 80 in. lb (9 N.M.). Make sure that mounting screws are anchored into the center of the stud. The use of an "edge to edge" stud fi nder is highly recommended. Hardware provided is for attachment of mount through standard thickness drywall or plaster into wood studs. Installers are responsible to provide hardware for other types of mounting situations. Wall plate () can be mounted to two studs that are 6" apart. Use a stud fi nder to locate the edges of the studs. Use of an edge-to-edge stud fi nder is highly recommended. ased on their edges, draw a vertical line down each stud s center. Place wall plate on wall as a template. Level plate, and mark the center of the four mounting holes. Make sure that the mounting holes are on the stud centerlines. Drill four 5/32" (4 mm) dia. holes 2-/2" (64 mm) deep. Make sure that the wall plate is level, secure it using four #4 x 2.5" wood screws (C) as shown. Skip to step 2 C STUD 4 of 9 ISSUD: SHT #:
5 WRNING When installing Peerless wall mounts on cinder block, verify that you have a minimum of -3/8" of actual concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! e sure to mount in a solid part of the block, generally " minimum from the side of the block. Cinder block must meet STM C-90 specifi cations. It is suggested that a standard electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid breaking out the back of the hole when entering a void or cavity. Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor. Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. Make sure that wall plate () is level, use it as a template to mark four mounting holes. Drill four /4" (6 mm) dia. holes to a minimum depth of 2.5" (64 mm). Insert anchors (D) in holes fl ush with wall as shown in fi gure.2. Place wall plate over anchors and secure with #4 x 2.5" screws (C). Level, then tighten all fasteners. fig.. D solid concrete cinder block Skip to step 2 WRNING CUTWY VIW Tighten screws so that wall plate is fi rmly attached, but do not overtighten. vertightening can damage screws, greatly reducing their holding power. Never tighten in excess of 80 in. lb (9 N.M.). lways attach concrete anchors directly to loadbearing concrete. Never attach concrete anchors to concrete covered with plaster, drywall, or other fi nishing material. If mounting to concrete surfaces covered with a fi nishing surface is unavoidable, the fi nishing surface must be counterbored as shown below. e sure concrete anchors do not pull away from concrete when tightening screws. If plaster/drywall is thicker than 5/8", custom fasteners must be supplied by installer. wall plate plaster/ dry wall INCRRCT concrete wall plate plaster/ dry wall CRRCT concrete 2 C Drill holes and insert anchors (D). C concrete surface D Place plate () over anchors (D) and secure with screws (C) D 3 Tighten all fasteners. 5 of 9 ISSUD: SHT #:
6 Installation to Metal Studs WRNING Drywall must be /2" or thicker, and metal stud must be 24 gauge or thicker. Make sure that the wall will safely support the combined load of the equipment and all attached hardware and components. Make sure that togglers are anchored into the center of the studs. The use of an "edge to edge" stud fi nder is highly recommended. Using a stud fi nder, locate and mark the edges of the metal stud used in mounting this product. Use of an edge to edge stud fi nder is highly recommended. Use a level to draw a level, vertical line down the center of the stud. Level wall plate, and mark the center of the six mounting holes. Make sure that the mounting holes are on the stud centerlines. Drill two /2" holes through drywall and metal studs. NT: It may be necessary to drill 5/32" pilot holes prior to drilling /2" holes. Install togglers (P) as shown in fi gure.3. Loosely fasten wall plate to wall using six /4-20 x 2-/2" screws (N) and six /4" washers () as shown in fi gure.4. Level, hold, and then tighten all screws. fig..3 drill /2" hole Pivot end of toggler (). 2 Push into hole. 3 N fig..4 P Rotate toggler () clockwise to wedge it against inside walls of metal stud. 4 Slide plastic cap forward while pulling back fi rmly on ring. 5 reak off excess. 6 of 9 ISSUD: SHT #:
7 Placement of dhesive Strips 2 Place adhesive strips (K) on the wall plate () in location that will allow the most contact with CPU. Note: Placement of adhesive strips will vary depending on size of CPU as shown in fi gure 2.2 K fig. 2. Placement of adhesive strips (K) for smaller CPU's fig. 2.2 Placement of adhesive strips (K) for larger CPU's ttach CPU to Wall Plate 3 NT: Safety belt may need to be loosened to attach CPU to wall plate (). Press CPU against adhesive strips on wall plate and tightly secure safety belt against CPU. CPU SFTY STRP 7 of 9 ISSUD: SHT #:
8 ttaching dapter Plate to Screen 4 ttaching adapter plate to screen with VS hole pattern: Choose hole pattern and fasteners shown in detail 2 for mounting screen with VS mounting patterns. Hand thread screws (F, G or H) through washers (J or ) and adapter plate () into screen as shown in figure 4.. Screw must make at least three full turns into the mounting hole and fi t snug into place. Securely tighten screws. fig. 4. SCRN If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. VS 00 x 00 WRNING MUNTING PTTRNS J or VS 200 x 00 VS 200 x 200 F, G or H M4 x 2 mm screws (F) with #8 washers (J) or M5 x 2 mm screws (G) with /4" washers () M4 x 2 mm screws (F) with washers (J), M5 x 2 mm screws (G) or M6 x 2 mm screws (H) with /4" washers () M5 x 2 mm screws (G) or M6 x 2 mm screws (H) with /4" washers () DTIL 2 ttaching adapter plate to dedicated adapter plates: Using the hole pattern shown in detail 3, attach the adapter plate () to dedicated adapter plate with four M0 x 5 mm screws (I) as shown in fi gure 4.2. Tighten screws using 6 mm allen wrench (not included). fig. 4.2 DDICTD DPTR PLT MUNTING PTTRN FR DDICTD DPTR PLTS I DTIL 3 8 of 9 ISSUD: SHT #:
9 ttaching dapter Plate to Wall Plate 5 Thread two M8 x 5 mm screws () into bottom holes of wall plate () leaving /8" space between head of screw and wall plate as shown in fi gure 5.. Guide hook slots of adapter plate () onto screws (), while supporting weight of screen, align top holes of wall plate and adapter bracket to the desired tilt angle and secure with two M8 x 5 mm screws (). Tighten all screws securely. fig TILT 5 TILT N TILT fig. 5.2 HK SLTS TH SIDS /8" ccessing CPU 6 Loosen top two M8 x 5 mm screws () /4 turn and temporarily remove bottom two M8 x 5 mm screws () on adapter plate () as shown in fi gure 6.. Swing screen forward and swing support brackets downward into adapter plate () to brace screen in open position as shown in fi gure 6.2. fig. 6. LSN /4 TURN N TH SIDS WLL NT SHWN FR CLRITY fig. 6.2 SUPPRT RCKTS (TH SIDS) RMV 9 of 9 ISSUD: SHT #: , Peerless Industries, Inc. ll rights reserved. ll other brand and product names are trademarks or registered trademarks of their respective owners.
Installation and Assembly: Flat \ Tilt Wall Mount for VESA 400x400
Installation and ssembly: Flat \ Tilt Wall Mount for VES 400x400 Model: T642-003 Max Load Capacity: 100 lb (45.4 kg) 3215 W. North ve. Melrose Park, IL 60160 (800) 729-0307 or (708) 865-8870 Fax: (708)
More informationInstallation and Assembly: Flat Panel Pull-out Swivel Wall Mount
Installation and ssembly: Flat Panel Pull-out Swivel Wall Mount Models: SP850-V2X2 2300 White Oak Circle urora, Il 60502 (800) 865-2112 Fax: (800) 359-6500 www.peerlessmounts.com ISSUED: 01-17-12 SHEET
More informationInstallation and Assembly: Mount - Wall/Ceiling Mount
Installation and ssembly: Mount - Wall/Ceiling Mount Model: DST360 Max oad Capacity: 150 lb (68. kg) 3215 W. North ve. Melrose Park, I 60160 (800) 729-0307 or (708) 865-8870 ax: (708) 865-2941 www.peerlessmounts.com
More informationInstallation and Assembly: Universal Projector Wall Arm
Installation and ssembly: Universal Projector Wall rm Models: PST-2955, PST-2955-W, PST-2955, PST-2955-W Max UL Load Capacity: 35 lb (5.8 kg) 2300 White Oak Circle urora, Il 60502 (800) 865-22 Fax: (800)
More informationInstallation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays
Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502
More informationInstallation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
More informationInstallation and Assembly: Wallmount for CPA100 and Whiteboard
Installation and ssembly: Wallmount for CP100 and Whiteboard Model: 100IWBMOUNT Maximum Load Capacity for Screen: 53 lb (24 kg) Maximum Load Capacity for Projector : 13.5 lb (6 kg) 1 of 16 Visit 3215 the
More informationInstallation and Assembly: Full Service Video Wall Mount
Installation and Assembly: Full Service Video Wall Mount Model: DS-VW765-LAND Max UL Load Capacity: 125 lb (57 kg) 1 of 12 ISSUED: 05-13-11 SHEET #: 145-9011-5 05-21-12 Note: Read entire instruction sheet
More informationInstallation and Assembly: Universal Projector Wall Arm
nstallation and ssembly: Universal Projector Wall rm Model: SP-WLLRM-01 SP-CEL-UNV (sold separately) Max Load Capacity:35 lb (15.8 kg) Note: Read entire instruction sheet before you start installation
More informationInstallation and Assembly: Projector Ceiling/Wall Mount
Installation and ssembly: Projector Ceiling/Wall Mount Models:PRG-EX, PRG-EX-S, PRG-EX-W PRG-EXB, PRG-EXB-S, PRG-EXB-W PRG-EXC, PRG-EXC-S, PRG-EXC-W R This product is intended for use with UL Listed products
More informationInstallation and Assembly: In-wall Mount for 32" to 71" Flat Panel Displays
Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Displays Model# Display size range IM760P, IM760P-S 32" to 71" (81 to 180 cm) IM760PU, IM760PU-S 32" to 65" (81 to 165 cm) This product
More informationInstallation and Assembly: Projector Ceiling/Wall Mount
Installation and ssembly: Projector eiling/wall Mount Model# Max UL Load apacity EX, EX-S, EX-W, EX, EX-S, used with PRS projector mount 25 lb (11.3 kg) EX-W, EX, EX-S, EX-W used with PRG projector mount
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationModels: PLAV70-UNL, PLAV70-UNLP. Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 95" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 95" Plasma Screens Models: PLAV70-UNL, PLAV70-UNLP Max UL Load Capacity: 200 lb (91 kg) 2300 White Oak Circle Aurora, Il 60502
More informationInstallation and Assembly: In-wall Mount for 32" to 71" Flat Panel Screens
Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Screens Model# IM760P, IM760P-S IM760PU, IM760PU-S Screen size range 32" to 71" (81 to 180 cm) 32" to 60" (81 to 152 cm) IM760P IM760P-S
More informationNEC Display Solutions of America, Inc.
NEC Display Solutions of merica, Inc. Installation and ssembly Manual: Custom Ceiling Mount for NEC NP400, NP500, NP500W, and NP600 Projectors Model: NP600CM Maximum Load Capacity: 50 lb (22.7 kg) Features:
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 65" Plasma Screens. Models: PLAV70, PLAV70-S
Installation and ssembly - Universal rticulating Swivel Double-rm for 42" - 65" Plasma Screens Models: PLV70, PLV70-S Max UL Load apacity: 200 lb (91 kg) 2300 White Oak ircle urora, Il 60502 (800) 865-2112
More informationInstallation and Assembly: Ceiling mount for LCD screens up to 29"
Installation and Assembly: eiling mount for L screens up to 29" Models: L18-, L18-S, L36-, L36-S Features: omes in two adjustable height ranges (in 1" increments): 18"-30" and 36"-48" -5 to +20 adjustable
More informationInstallation and Assembly - Articulating Swivel Double-Arm for 42" - 71" Plasma Screens
Installation and ssembly - rticulating Swivel Double-rm for 42" - 71" Plasma Screens Models: PLV 70, PLV 70-S R This product is UL Listed. It must be installed by a qualified professional installer. Maximum
More informationNEC Display Solutions of America, Inc.
NEC Display Solutions of merica, Inc. Installation and ssembly Manual: Custom Ceiling Mount for NP-M332XS, NP-M352WS, NP-M282X, NP-M283X, NP-M322X, NP-M323X, NP-M322W, NP-M323W, NP- M363X, NP-M363W, NP-M402X,
More informationInstallation and Assembly: Recessed Cable Management and Power Storage Accessory Box
Installation and Assembly: Recessed Cable Management and Power Storage Accessory Box Models: IBA3, IBA3-W 2300 White Oak Circle Aurora, Il 60502 (800) 865-2112 Fax: (800) 359-6500 www.peerlessmounts.com
More informationInstallation and Assembly: DUKANE PROJECTOR SHORT THROW WALL ARM
Installation and Assembly: DUKANE POJETO SHOT THOW WALL AM Model: UST-WALLAM3 POJETO POSITION FO 60" - 70" SEEN SIZE POJETO POSITION FO 70" - 100" SEEN SIZE 430-User Guide UST-WALLAM3-00 Do not begin to
More informationInstallation and Assembly: Recessed Cable Management and Power Storage Accessory Box
Installation and Assembly: Recessed Cable Management and Power Storage Accessory Box Models: IBA2AC, IBA2AC-W 2300 White Oak Circle Aurora, Il 60502 (800) 865-2112 Fax: (800) 359-6500 www.peerlessmounts.com
More informationInstallation and Assembly Manual: PRS Series Projector Mount
Installation and ssembly Manual: PRS Series Projector Mount Models: PRS-1, PRS-1S, PRS-1W Features: ImageLock TM alignment prevents picture sag or drift Exclusive aluminum track quick release C U L US
More informationINSTALLATION GUIDE. Flat Panel Arm Mount BTAR2/37. VESA 200x200 compatible. Support 24" to 37" Screens Max Load Capacity: 80 lbs (36 kg)
INSTALLATION GUIDE Flat Panel Arm Mount BTAR2/37 Support 2" to 37" Screens Max Load Capacity: 80 lbs (36 kg) VESA 200x200 compatible Note: Read entire instruction sheet before you start installation and
More informationINSTRUCTION MANUAL LCD TV BRACKET WM-3968
INSTRUCTION MANUAL LCD TV BRACKET WM-3968 DEAR CUSTOMER In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference.
More informationInstallation & Assembly: Two Piece Suspended Ceiling Plate
Installation & ssembly: Two Piece Suspended Ceiling Plate Model: CMJ453 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112
More informationInstallation and Assembly: Ceiling mount for LCD screens up to 29"
Installation and Assembly: Ceiling mount for LC screens up to 29" Models: LCC 18, LCC 18-S, LCC 36, LCC 36-S Patent Pending Features: Comes in two adjustable height ranges (in 1" increments): 18"-30" and
More informationINSTALLATION GUIDE. Flat Panel Arm Mount MLA100-L. VESA 100x100 compatible. Support 10" to 24" Screens Max Load Capacity: 30 lbs (15 kg)
INSTALLATION GUIDE Flat Panel Arm Mount MLA100-L Support 10" to 24" Screens Max Load Capacity: 30 lbs (15 kg) VESA 100x100 compatible Note: Read entire instruction sheet before you start installation and
More informationInstallation & Assembly: Suspended Ceiling Kit
Installation & ssembly: Suspended Ceiling Kit Model: CMJ450 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112 Fax: (800) 359-6500
More informationInstallation and Assembly: Adjustable Suspended Ceiling Channel Kit
Installation and ssembly: djustable Suspended Ceiling Channel Kit Model: CMJ500R1 C U L US This product is UL Listed. It must be installed by a qualified professional installer. Maximum UL Load Capacity:
More informationInstallation and Assembly Manual: PRS, RTR Series Projector Mount
Installation and ssembly Manual: PS, T Series Projector Mount Models: PS-UNV, PS-UNV-S, PS-UNV-W PS-UNVP, PS-UNVP-S, PS-UNVP-W T-UNB, T-UNS, T-UNW This product is intended for use with UL Listed products
More informationInstallation and Assembly: Flat Panel Pull-out Swivel Wall Mount
Installation and ssembly: Flat Panel Pull-out Swivel Wall Mount Models: SP 850, SP 850P, SP 850-S, SP 850P-S Max Load Capacity: 150 lb (68 kg) 3215 W. North ve. Melrose Park, IL 60160 (800) 729-0307 or
More informationInstallation and Assembly: Adjustable Extension Column (Pipe) 8" - 11"
Installation and ssembly: djustable Extension Column (Pipe) 8" - 11" Model: ELPMBC01 R This product is UL Listed. It must be installed by a qualified professional installer. Maximum UL Load Capacity: 500
More informationINSTALLATION GUIDE. Flat Panel Arm Mount MHA-800. VESA 500x800 compatible. Support 42" to 63" Screens Max Load Capacity: 200 lbs (91 kg)
INSTALLATION GUIDE Flat Panel Arm ount HA-800 Support 2" to 63" Screens ax Load Capacity: 200 lbs (91 kg) VESA 500x800 compatible Be sure to read this entire manual thoroughly and you fully understand
More informationInstallation and Assembly Manual: Vector Pro II
Installation and ssembly Manual: Vector Pro II Models: PJF2-UNV, PJF2-UNV-S R This product is intended for use with U isted products and must be installed by a qualified professional installer. Maximum
More informationInstallation and Assembly: Wireless Articulating Arm Wall Mount for 42" to 60" Flat Panel Displays
Installation and Assembly: Wireless Articulating Arm Wall Mount for 42" to 60" Flat Panel Displays Model: WL-SA761PU-200 Maximum Load Capacity: 130 lbs (59 kg) 2300 White Oak Circle Aurora, Il 60502 (800)
More informationINSTALLATION GUIDE Ceiling TV Mount MHP-52
ISTLLTIO GUIDE Ceiling TV Mount MHP-52 Max Load Capacity: 125 lbs (57kg) ote: Read entire instruction sheet before you start installation and assembly. Be sure to read this entire manual thoroughly and
More informationInstallation and Assembly: 32" - 60" Flat Panel TV Cart
nstallation and Assembly: 32" - 60" Flat Panel TV Cart Models: SR1M, SR560M R This product is UL Listed. t must be installed by a qualified professional installer. Max UL Load Capacity: 150 lb (68 kg)
More informationSM-RAZOR-T-M/L/XL. Strong Low Profile Tilt Mount for Ultra-Thin Flat-Panel TVs INSTRUCTION MANUAL
SM-RAZOR-T-M/L/XL Strong Low Profile Tilt Mount for Ultra-Thin Flat-Panel TVs INSTRUCTION MANUAL WARNINGS: Installation of this product should be done by a qualified professional. Do not begin installation
More informationINSTALLATION GUIDE. Flat Panel Arm Mount MHA-72. VESA 750x850 compatible. Support 52" to 72" Screens Max Load Capacity: 300 lbs (136 kg)
INSTALLATION GUIDE Flat Panel Arm Mount MHA-72 Support 52" to 72" Screens Max Load Capacity: 300 lbs (136 kg) VESA 750x850 compatible Note: Read entire instruction sheet before you start installation and
More informationSM-RAZOR-F-M/L/XL. Strong Low Profile Fixed Mount for Ultra-Thin Flat-Panel TVs INSTALLATION MANUAL
SM-RAZOR-F-M/L/XL Strong Low Profile Fixed Mount for Ultra-Thin Flat-Panel TVs INSTALLATION MANUAL WARNINGS: Installation of this product should be done by a qualified professional. Do not begin installation
More informationInstallation and Assembly: Dual-Screen Desktop Mount for 10" to 20" LCD Monitors
nstallation and ssembly: Dual-Screen Desktop Mount for 0" to 0" LD Monitors Models: LT-0 Max Load apacity: 5 lb (.3 kg) per arm 35 W. North ve. Melrose Park, L 6060 (800) 79-0307 or (708) 865-8870 Fax:
More informationFlat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold
FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination
More informationFull-motion Wall Mount
Full-motion Wall Mount MD120409-01 AWM1521- AU Safety Instruction Component Checklist WARNING IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing.
More informationInstallation and Assembly: Adjustable Extension Column (Pipe) 8" - 11"
Installation and ssembly: djustable Extension Column (Pipe) 8" - 11" Model: ELPMBC01 R This product is UL Listed. It must be installed by a qualified professional installer. Maximum UL Load Capacity: 500
More informationWARNING. Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.
All-in-one Projector Adapter Plate I5300 series, I5500 series, and SP8602 series Model: SP-CEIL-ISTALL Maximum Load Capacity: 50 lbs/22 kg Read all instructions before you start installation and assembly.
More informationMax Load Capacity: 50 lb (22.6 kg) J K
Installation and ssembly: ptoma Universal Projector Mount y Peerless Model: M-500U Max oad apacity: 50 lb (.6 kg) R This product is intended for use with U isted products and must be installed by a qualified
More informationSM-RAZOR-ART2-L / SM-RAZOR-ART2-XL
SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL Strong Razor Series Articulating Mount for Large and Extra Large Displays INSTRUCTION MANUAL Installation Manual Warnings: Installation of this product should be done
More informationInstalling flat panels on the MPL15 wall mount
Installing flat panels on the MPL15 wall mount The MPL15 (DS-VW775) is a full-service video wall mount that can accommodate tiled LCD panels with up to a 400 x 400 mm VESA pattern in portrait and landscape
More informationInstallation and Assembly: 32" - 60" Flat Panel TV Cart
Installation and Assembly: 32" - 60" Flat Panel TV Cart Models: SR1G, SR560G R This product is U isted. It must be installed by a qualified professional installer. Max U oad Capacity: 150 lb (68 kg) screen
More informationSB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL
SB-WM-ART1-M-BL Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 90 lbs (41 kg). Use with heavier than the maximum
More informationProjector Ceiling Mount
INSTALLATION MANUAL Projector Ceiling Mount PID:3010 PID:5466 20kg (44lbs) RATED CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! ISSUED: FEB. 2013 NOTE: Read the
More informationInstallation Instructions
Installation Instructions Flat Wall Mount CAUTION: DO NOT EXCEED THE MAXIMUM STATED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! SLT-400 200x200 / 300x300 400x200 / 400x400 46 MAX 70kg
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationflat panel solutions Specifications Box contents Warnings CAUTION: Tilt Wall Mount for LCD, Plasma, and LED Displays Instruction Manual
flat panel solutions Tilt Wall Mount for LCD, Plasma, and LED Displays Instruction Manual MST65BKR Fits TVs 37-65 Maximum Load Capacity 165 lb (75kg) Specifications Display Size: 37 to 65 Maximum Load:
More informationSB-WM-ART2-L-BL SB-WM-ART2-XL-BL
SB-WM-ART2-L-BL SB-WM-ART2-XL-BL Weatherproof Universal Dual-Arm Articulating Mount for Large TVs INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier
More informationSR560G SR560M. Flat Panel TV Carts. For 32" to 65" LCD and Plasma Flat Panel Screens. with Glass Shelf. with Metal Shelf
SR560G with Glass Shelf SR560M with Metal Shelf Flat Panel TV Carts For 32" to 65" LCD and Plasma Flat Panel Screens Peerless SmartMount Flat Panel TV Carts offer the most complete mobile solutions for
More informationInstallation and Assembly: LCD UPRIGHT STAND FOR PEDESTAL CABINETS
Installation and Assembly: LCD UPRIHT STAND OR PEDESTAL CABINETS Part Number 49-5672-30 EATURES Take all of the guess work out of selecting the proper stand for your pedestal cabinets. This custom stand
More informationInstallation and Assembly: Flat-Panel Base Lock-Down Kit for Samsung Display Models
Installation and ssembly: Flat-Panel Base Lock-own Kit for Samsung isplay Models Models: HLG452-SM, HLG452-SM-Q10 Maximum isplay Size: 100 lb (45.35 kg) 3215 W. North ve. Melrose Park, IL 60160 (800) 729-0307
More informationTV WALL MOUNT ASSEMBLY GUIDE RF-TVMLPT01V2
TV WALL MOUNT RF-TVMLPT01V2 For wood-stud and concrete wall installations Safety information and specifications...2 Tools needed...2 Package contents...3 Installation instructions...4 ASSEMBLY GUIDE Before
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
More informationDX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations
ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3
More informationINSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110
INSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110 The KWE dual swing arm wall mount is designed to provide a broad range of viewing for Small
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS P4263F Universal Low Profi le Flat Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888
More informationInstallation and Assembly - Vision Point LCD Screen Pedestal Stand - 75/100 mm Adapter Plate
Installation and ssembly - Vision Point CD Screen Pedestal Stand - 75/100 mm dapter Plate Model: CS 100, CS 100S Read instruction sheet before you start installation and assembly. Maximum oad Capacity:
More informationInstallation and Assembly:
Installation and Assembly: PeerSound Wireless Short Throw Projector AV System PeerSound Wireless Short Throw Projector Audio System Models: WL-AU-PST600(A), WL-AU-PST1200(A), WL-AU-PST1600(A), WL-AU-PST600(A)-W,
More informationSmall Above Fireplace Pull-Down Full-Motion TV Wall Mount
Small Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 33123 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
More information19 to 39 TV WALL MOUNT - FULL MOTION
19 to 39 TV WALL MOUNT - FULL MOTION RF-HTVMMAB For wood-stud and concrete wall installations Safety information and specifications...2 Tools needed...2 Package contents...3 Installation instructions...5
More informationParts List D E. Installation and Assembly- Encore Projector Mount Protected by U.S. Patent No. 6,042,068. Model: PJRL411
nstallation and ssembly- ncore Projector Mount Protected by U.S. Patent No. 6,042,068 Model: PRL4 MPORTNT! Read entire instruction sheet before you start installation and assembly. WRNN! nstaller must
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Flat Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS AM2 / AM2-B Articulating Swingout Arm NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone:
More informationMONOPRICE. Above Fireplace Pull-Down Full-Motion TV Wall Mount. User's Manual P/N 27773
MONOPRICE Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 27773 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Premier Mounts Tilting Wall Mount Model: TWM-085 For use with Panasonic 85 Flat Panel NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationPFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS
Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS 9531-007-Z00-01 Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 Wood Stud Installation 5 Concrete Surface Installation
More informationPHTM200 - Phantom 200 Flat Screen Wall Mount with Wafer Thin Projection Fits Screens up to 50 lbs with 200mm Mounting Patterns
PHTM200 - Phantom 200 Flat Screen Wall Mount with Wafer Thin Projection Fits Screens up to 50 lbs with 200mm Mounting Patterns Features: Durable high quality gloss black baked on powder coat finish Fits
More informationPFW 6875 Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids
Maximum Flat Panel Weight: 160 lb. / 72.57 kg. Included Components Wall Mount (Qty 1) Extension Brackets (Qty 2) Bracket (Qty 1 Pair) 5/16 Flat Washers (Qty 4) Universal Spacers (Qty 8) M5 Allen Driver
More informationFixed Wall Arm. Installation Guide. Part number Rev E 2012 PolyVision Corporation All rights reserved
Fixed Wall Arm Installation Guide Part number 2002003-001 Rev E 2012 PolyVision Corporation All rights reserved Table of contents Important Safety Instructions... 3 Overview... 4 Important considerations...
More informationINSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000
INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone:
More informationINSTALLATION INSTRUCTIONS SMALL FLAT PANEL ADJUSTABLE PITCH WALL MOUNT Model: FTR Series
INSTALLATION INSTRUCTIONS SMALL FLAT PANEL ADJUSTABLE PITCH WALL MOUNT Model: FTR Series Specifications: Designed for installation on single wood studs or drywall (1/2" minimum thickness); either option
More informationQLF215 INSTRUCTION MANUAL
QLF215 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We re ready to help! 1 2 3 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
More informationPlanar FWMG-MXL INSTALLATION INSTRUCTIONS
Planar FWMG-MXL INSTALLATION INSTRUCTIONS Fixed Wall Mount for Ultra Large Displays 50-98 weighing less than 300 lbs. Part Number: 955-0217-00 Planar, A Leyard 1195 NW Compton Drive Beaverton, OR 97006
More informationInstallation and Assembly - Desktop Swivel Mount For 32" - 55" Flat Panel Display
Installation and ssembly - Desktop wivel ount For 32" - 55" Flat Panel Display odels: HP455 ax Load apacity: 75 lb (34 kg) IUED: 2012-06-28 HEET #: 125-9328-4 (2017-10-20) NOTE: Read instruction sheet
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Swingout Arm for 37 to 47 Flat Panels Model: AM80 NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationINSTALLATION INSTRUCTIONS SMALL FLAT PANEL ADJUSTABLE PITCH WALL MOUNT Model: FTR Series
INSTALLATION INSTRUCTIONS SMALL FLAT PANEL ADJUSTABLE PITCH WALL MOUNT Model: FTR Series Specifications: Designed for installation on single wood studs or drywall (1/2" minimum thickness); either option
More informationAssembly Instructions for Model: VMDD26
Assembly Instructions for Model: VM26 Thank you for choosing a Sanus Systems Vision Mount wall mount. The VM26 is designed to mount up to 63 lat panel televisions weighing up to 175 lb. to a vertical wall.
More informationMantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MantelMount TMA Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS TM Thank you for choosing the MantelMount television wall mount. Please read this entire manual before
More informationArticulating TV/Monitor Wall Mount Model: WA300S (Butterfly Series)
P Articulating TV/Monitor Wall Mount Model: WA300S (Butterfly Series) Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct information
More informationEnglish FULL MOTION FLAT PANEL TV MOUNT. User Manual L102 TV Mount. 56 lb (25 kg) VESA. Supporting your digital lifestyle (
English User Manual L102 TV Mount FULL MOTION FLAT PANEL TV MOUNT ±12 19-32 56 lb (25 kg) 50x50-200x200 VESA ±180 3-17 (7.6-43.2 cm) Supporting your digital lifestyle Table of Contents Table of Contents
More informationAssembly Instructions for Model: MF110
Assembly Instructions for Model: MF110 Thank you for choosing a Sanus Systems VisionMount wall mount. The MF110 is designed to mount LCD flat panels with VESA (Video Electronics Standards Association)
More informationPART #MSP-DCCST Flat Panel Tilt Mount
INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS PDS-PLUS Universal Projector Mount Model: NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationMount to the Wall INSTALLATION MANUAL
Mount to the Wall 15 Locate the Wooden Studs This step applies to wooden stud wall installation only. Determine and mark the exact locations of two stud centers on the wall. Wooden studs should be spaced
More informationFOR WALL MOUNT WORKSTATION
INSTALLATION MANUAL FOR WALL MOUNT WORKSTATION Weight Capacity 5-20 lbs. 1210180 Rev. C TABLE OF CONTENTS Tools Required / Installation Warnings / Disclaimer / Safety Warning / Adjustment Notification...3
More informationINSTALLATION GUIDE. Model:B60 RECESSED IN WALL MOUNT
INSTALLATION GUIDE Model:B60 RECESSED IN WALL MOUNT Features: Installs between 16 (406mm) wood stud centers Mounting Pattern Compliance: VESA 100*100mm up to 600 x 400mm Level 5 degree horizontal adjustment
More informationQLF214 INSTRUCTION MANUAL
QLF214 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. (UK: 0800 056 2853) We re ready to help! CAUTION: IMPORTANT SAFETY INSTRUCTIONS
More informationMM750 Installation Instructions
MM750 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on
More informationMidmark Care Exchange 6282 Standard Duty Wall Mounted Workstation
INSTALLATION MANUAL Midmark Care Exchange 6282 Standard Duty Wall Mounted Workstation Weight Capacity 5-20 lbs 1210180MD Rev. C TABLE OF CONTENTS Tools Required / Installation Warnings / Disclaimer / Safety
More information