Connections. Forged Branch. Elbow&LateralConnections... 19
|
|
|
- Prosper Haynes
- 6 years ago
- Views:
Transcription
1 Forged Branch Connections Specifications Trans-O-Con Features &Applications Trans-O-Con Industry Standard Consolidation Butt-Weld Threaded Socket Reducing Elbow&LateralConnections
2 PHOENIX transition pipe connections are used successfully in numerous types of product distribution installations. The structurally reinforced design of our ~ products insures a connection that is equal in strength to the original pipe. Material costs and installation time can be greatly reduced by usingtrans-a-con connections in new construction as well as for plant conversions and in maintenance operations. Facilitiesnow using our branch connections include:power generating stations, commercial & industrial buildings,chemical & petrochemical plants and refineries. STRENGTH RATINGS TRANS-a-CONconnectionshavestrengthratingsequalto seamlesssteel pipe. These ratingsare basedon the ASMECode for PressurePiping,B31,the ASMEBoilerConstructionCode and ANSI/ASME B36.1 O. For example, an extra-strong TRANS-a-CON applied to extra-strong pipe pf the equivalent material provides 100%pipe strength. A standard weighttrans-a-con provides 100%pipe strength when used on standard weight pipe. SPECIFICATIONS TRANS-a-CON connections are manufactured according to the requirements of the ANSI standard for Steel Butt Welding Fittings (B16.9,latest modification);the ASMEstandard for Forged Fittings,SocketWelding and Threaded Fittings (B16.11,latest modification),the ANSI standard for Pressure Piping(B31,latest modification),and MSSSP-97. When TRANS-a-CON connections are installed as recommended, their bursting strength exceeds the computed bursting strength of pipe or the designated weight or schedule number and material. Certifications are provided upon request. 24-hour acces to specifications through electronic MTR'son our web site. Approval listings on file. IDENTIFICATION AND MARKING TRANS-a-CON connections are forged from carbon steel hot rolled bar to meet A-IOSmaterial specifications. Every connection is individuallyinspected and stamped with header size, outlet size, material specification, pressure rating, manufacturer's symbol and identification number. LABORATORY RESEARCH TRANS-a-CONconnectionshavebeentested to insurethe strengthof the branchconnectionequalsor exceedsthe actual burstingstrengthof the unpenetratedbasematerial.see a test examplebelow. 2 x 2 Header in j 3 x 3 Header QUALITY IDENTIFICATION MARKING To insure the material integrity of our fittings,every heat of steel is analyzed by the originating millfor proper chemistry from which the steel supplier provides us with a chemistry report. A forged test bar is prepared from each heat ' ' of steel by our forgeplantsand is analyzedby an independenttestinglaboratoryfor complianceof mechanicalproperties. Each fitting is marked per MSSSP-25 for complete traceability in order that certification can be provided as required.
3 Phoenix Butt-Weld Size Range ASME SA10S1 A 3S0-LF21 MSS SP-97 1 POWER PIPINGASMEB31.1 LIQUIDTRANSPORTATION.ASME B31.41 ASTM A10S1 NACEMR017S REFININGASMEB31.31 GASTRANSMISSIONASMEB31.8 ASME B16.91 ASME B ASME B design provides 100% pipe strength and unrestricted fluid flow TRANS-a-CON connections maintain the strength of the run pipe and optimize flow characteristics of the entire system. The cutaway drawing shows exactly how this is accomplished. Additional TRANS-O-CON Advantages: Low Initial Cost Fast, EasyInstallation No Cutting, Shapingor Beveling Easyto Align Strength and quality Properties Found Only in a Forged Product.TAPERED TRANSITION FROM BRANCH TO HEADER AND HEAVY JUNCTURE MINIMIZES STRESS CONCENTRATIONS..WIDE FOOTING IMPROVES MECHANICAL STRENGTH TO WITHSTAND VIBRATIONAL STRESSES. J.SHORT ~ HEIGHT PERMITS ACCESS TO INSIDE SURFACE TO INSPECT FOR FULL-PENETRATION WELD Applications Use TRANS-O-CON connectors instead of WeldingTees Reinforced Branches Non-Reinforced Branches TRANS-a-CON transition pipe connections can be used in all of these applications to advantage. Not only is the cost lower, but consider the TRANS-a-CON benefits shown below. Why TRANS-O-CON connections are better than welding tees: Quicker Fabrication time Pipe can be run before branch connections are attached Gradual transition from header to branch improves stress distribution Lower material costs BUTT-WELD (STD & X STRONG) OUTLET SIZE-INCHES 5" 6" 8" 10" 12" 14" 16" 18" 14-12" 36-24" 24-20" 36" 36" 36" 36" 36" " 24" 24" 30" 30" " 20" 20" 24" 24" " 18" 18" 20" 20" " 16" 16" 18" 18" 6 14" 14" 14" 16" 12" 12" 10" Why TRANS-O-CON connections are better than Reinforced and Non-Reinforced Miter Branches: Quicker installation Provides perfectly contoured internal joint Requires no shaping Requires less cutting and welding Eliminatesmetal-to-metallapped surfaces and sharp corners Reduces overall cost of installation TRANs-a-coN WELDING TEE TRANs-a-coN MITER BRANCH
4 Phoenix ASME SA105 I A 350-LF21 MSS SP-97 I POWER PIPING ASME831.1 Indust ry Standard Consolidation LIQUIDTRANSPORTATIONASME ASTM A1051 NACEMR REFINING ASME GAS TRANSMISSION ASME Straight Bore Branch Connections ASME ASME ASME BUTT-WELD (STD) OUTLET SIZE. INCHES 1/4" 3/a" 1/2" 3/4" I" 11/4" 11/2" 2" 21/2" ]" 4" 6" w " 36-3/4" 36-11/4" 36-21/2" 36-2" 36-8" 36-4" 36-8" 36-12" 36-16" 36-22" 42-36" N 1/4" 1/2_ 3/8" I - 1/2" 2-3/4" 31/2"-11/4" 6-21/2" 31/2"-2" 6-31/2" 10-5" 14-8" 20-12" 34-26" - I" 2-11/2" 11/2" 3-21/2" 4-3" 6-5" 10-8" 24-20" 11/4" 2" 21/2" 4-31/2" 6-5" 18-16" 3" 4" 14-12" 10" Z 8" 6" :I BUTT-WELD (EXTRA STRONG) OUTLET SIZE. INCHES II: 1/4" 3/a" 1/2" 3/4" I" 11/4" 11/2" 2" 21/2" ]" 4" 6" " 36-1/2" 36 - I" 36-2" 36-2" 36-6" 36-4" 36-8" 36-12" 36-16" 36-22" 42-36" w 3/8" 3/4"- 1/2" 11/2"_3/4" 3" - 11/4" 5-21/2" 31/2"- 2" 6-31/2" 10-5" 14-8" 20-12" 34-26" a. I" 2-11/4" 11/2" 3-21/2" 4-3" 6-5" 10-8" 24-20" - 2" 21/2" 4-31/2" 6-5" 18-16" 3" 4" 14-12" a. 10" 8" SOCKET-WELD (3000#) OUTLET SIZE -INCHES 6" w 1/4" 3/8" 1/2" 3/4" I" 11/4" 11/2" 2" 21/2" ]" 4" " 36 ES -3/4" 36-3/4" 36-11/2" 36-3" 36-4" 36-6" 36-8" 36-10" 36-16" 36-22" FLAT SI N 1/4" 1/2_3/8" 1/2" 11/4 _314" 21/2-11/4" 31/2-2" 5-3" 6-4" 8-6" 14-8" 20-12" available - I/a" thro. gh I" 11/2-11/4" 21/2-2" 31/2-21/2" 5-4" 6-5" 10-8" 6" pipe 11/2" 2" 31/2-3" 4-31/2" 6-5" outlet. Z 21/2" 3" 4" Tradition al line of ru n :I SOCKET-WELD (6000#) OUTLET SIZE -INCHES pipe size II: available 1/4" 3/a" 1/2" 3/4" I" 11/4" 11/2" 2" 21/2" ]" 4" on inquir y. 36-1/4" 36-3/8" 36-3/4" w 36-11/4" 36-3" 36-5" 36-6" 36-8" 36-20" 36-28" 36-16" 1/2" I - 3/4" 21/2-11/4" 4-11/2" 5-3" 6-4" 18-6" 26-12" 14-10" a. I" 11/4" 21/2-2" 31/2-21/2" 5-31/2" 10-6" 8-6" Size on - 11/2" 2" 3-21/2" 5-4" 5" Size are a. conventi. nal 31/2-3" 4" funneled inlet desi gn. THREADED (3000#) OUTLET SIZE. INCHES 1/4" 3/8" 1/2" 3/4" I" 11/4" 11/2" 2" 21/2" ]" 4" w " 36-11/4" " 36-11/2" 36-3" 36-4" 36-6" 36-8" 36-10" 36-16" 36-22" N 3/8-1/4" I -3/8" 1/2" 11/4_ 314" 21/2-11/4" 31/2-2" 5-3" 6-4" 8-6" 14-8" 20-12" Z :I THREADED (6000#) OUTLET SIZE -INCHES I" 11/2-11/4" 21/2-2" 31/2-21/2" 5-4" 6-5" 10-8" 11/2" 2" 31/2-3" 4-31/2" 6-5" 21/2" 3" 4" II: 1/4" 3/8" 1/2" 3/4" I" 11/4" 11/2" 2" 21/2" ]" 4" " 36-11/4" " 36-11/2" 36-3" 36-10" 36-6" 36-8" 36-28" 36-14" 36-20" w 3/8-1/4" I - 3/8" 1/2" 21/2- I" 21/2-11/4" 8-4" 5-3" 6-4" 26-12" 12-8" 18-12" a. 3/4" 11/4- I" 31/2-2" 21/2-2" 31/2-21/2" 10-6" 6-5" 10-8" - 11/2-11/4" 11/2" 2" 5-4" 4" 6" a. 31/2-3" 31/2" 5" 21/2" 3" 4" 1/16" (~~hap MAXIM ~ SKIRT GAP 1 <-. 36"RUNPIPE HOW CONDENSED SIZE WORKS: Eachforged outlet size listed on the chart is designed to fit a range of pipe run sizes. For example: The 1/2" fitting marked 36-3/4" will fit each pipe run size from 3/4" to 36". There will be a maximum 1/16"gap as illustrated in diagrams. This gap is negligible when welding and has no adverse effect on the integrity of the connection. MINIMIZE WARHOUSE INVENTORY CROTCH 3/4" - 36" RUN PIPE GAP
5 Reducing Sizes MSS SP-97 STANDARD EXTRASTRONG I 1/4" /a" /2" /4" I" /4" /2" STRAIGHT 2" THRU 21/2" BORE 3" I " " " " " " " " " " " TRANS-O-CON@Threaded Reducing Sizes MSS SP-97. IItH-. NOTE: NPTThreads to ,"J;j;{.>.«.~::H 6000# ul IiI.I'J~I.J,.'" 11111"1.1"111-' I/a" /4" /a" /2" /4" I" /4" f2" " /2" " " ~ NEW FORGING TECHNOLOGY ~ i:soo::'4.i:j6 74.p~~~~~.I~~.~i~..:... i:ssii.7.44:ij26 L~~i;i.~~~...
6 .Ui: :j. 74'p;.;;;YI~';';j~.U:..i:...:7.;':,'ii6.':;';;~i';;';;.. u. U U U U. 00 U. U U. U U. U U U TRANS.O.CON@Socket Reducing Sizes MSS SP I # '11I'.;.11111I-. I/a" /4" /a" /2" AS 3/4" I" J1/4" /2" " /2" " " /16" NOTE: Socket minimum depth per ANSI B TRANS.O.CON@Elbow. Lateral Connections 3000# for 90 long radius pipe elbows Butt Weld / Socket / Threaded APPROX. (INCHES) ELBOW (INCHES) I OUTLET.-wl[)]IIMIE::INS:1I[O.]NS:1...n.. C E 36-3/4" 1/2" * SIZES SIZE WEIGHT POUNDS 36 - I" 3/4"* " I" * " 11/2" " 2" LATERAL 1/2"* 3/4"* 1"* 11/4" 11/2" 2" /2-11/ /2-2 21/2-2 21/ THREADED LATERAL CONNECTION * Available in 6000# SOCKET LATERAL CONNECTION THREADED FULL PENETRATION WELD SOCKET FULL PENETRATION WELD NOTE: Butt-Welding end dimensions to ANSI B16.9 and ANSI B
QUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
This specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
This specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
This specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
This specification describes the minimum requirements for piping systems for the following service:
SPEC-3501 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Instrument Air Design Conditions 150 PSIG @ 180 F Operating Conditions 125
Note: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)
PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
METAL FABRICATION SECTION 8: METAL FABRICATION SCOPE MATERIAL.
METAL FABRICATION SCOPE This specification applies to all metal intended to be rubber lined. Metals furnished must conform to this specification with respect to suitability for rubber lining or covering.
Kerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
FUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
A representative from Occupational Health is to be involved in the commissioning process to address any Respiratory Protection Program requirements.
SPEC-3017 1/8 1.0 PURPOSE This specification describes the minimum requirements for the installation of breathing air distribution systems (indoor and outdoor) up to the connection to the breathing air
A. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 22 05 16 LOOPS FOR PLUMBING PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
COMPLETE REVISION October Process Industry Practices Piping. PIP PNFJ8000 Jacketed Piping Fabrication and Installation Details
COMPLETE REVISION October 2007 Process Industry Practices Piping PIP PNFJ8000 Jacketed Piping Fabrication and Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
Annexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material)
Annexure - V Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) CONTENTS SL NO. DESCRIPTION 1.0 SCOPE 2.0 REFERENCE DOCUMENTS 3.0 MANUFACTURER'S QUALIFICATION 4.0 MATERIALS
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
SECTION STEEL LIGHTING STANDARDS. 1. Electrical conduit and fittings; Section
02760-1 of 5 SECTION 02760 STEEL LIGHTING STANDARDS 02760.01 GENERAL A. Description Steel lighting standards shall include, but not necessarily be limited to, furnishing and installing steel lighting poles,
ANSI ORIFICE FLANGES METAL-KOREA
METAL-KOREA ANSI ORIFICE FLANGES ORIFICE FLANGES are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding
Edward Valves Flow Control Solutions
Edward Valves Flow Control Solutions World s leading supplier of gate, globe and check valves Proven leading supplier of critical application valves for power generation plants Experience In Motion A History
Allentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015
Steel DIVISION 15: MECHANICAL SECTION 15061: STEEL PIPE 1.0 GENERAL All materials shall be of high quality and as per the following specifications. 2.0 PRODUCTS 2.1 Specification CS-1 Service = (CA, VAC)
International Organization for Standardization. American National Standards Institute
DFTG1329 Standards are published documents that set up rules, specifications and protocols designed to ensure consistency, compatibility and reliability of products, materials and services. Standards are
Midsteel Flanges & Fittings Ltd
Company Profile Stockist and Manufacturer s of Pipe, Flanges and Fittings for the Oil, Gas, Petrochemical, Fire Protection and Power Generation Industries. Contents Introduction to Location Stock Range
Engineering Design & Power Training Institute
Engineering Design & Power Training Institute Recognition & Approvals Association of Power & Design Engineers (APDE) An ISO 9001: 2008 Certified Institute Courses P G Diploma in Piping Design & Details
ASME B31.3 INTERPRETATIONS NO. 13
/. '.... _,' ASME B31.3 INTERPRETATIONS NO. 13 1 Replies to Technical Inquiries April 1, 1994, Through March 31, 1995 General Information It has been agreed to publish interpretations issued by the B31
Products catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
National Craft Assessment and Certification Program S P E C I F I C A T I O N S
National Craft Assessment and Certification Program S P E C I F I C A T I O N S BOILERMAKER PRESSURE VESSEL V2 BLMK34_02 October 2014 Focus Statement A journey level boilermaker is skilled in all aspects
DOLPHIN SHELL & TUBE MARINE CONDENSERS (DSTMC)
PIOEER I HEAT TRASFER TECHOLOGY DOLPHI SHELL & TUBE MARIE CODESERS (DSTMC) Dolphin Shell & Tube Marine Condenser (DSTMC) General Information Dolphin carries out Thermal Design, Mechanical Design & detailed
Waukesha Foundry. Industry Experience Engineering Expertise
Waukesha Foundry Industry Experience Engineering Expertise Advanced Technology Experience an Industry Leader Waukesha Foundry has earned a reputation as an innovator in the production of high-quality cast
SECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 230553 - IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Nameplates. B. Tags. C. Stencils. D. Pipe Markers. 1.2 RELATED REQUIREMENTS A. Section 099123 - Interior
Steel Plate in Oil Rig Blowout Preventer Valves
Design Problem Steel Plate in Oil Rig Blowout Preventer Valves Introduction Design for Performance Alloy selection Radii and stress reduction Design for Production Mould method Orientation and cores Controlling
SPECIFICATIONS MS-10-5 MS Cutting capacity (Rated 80,000 PSI Tensile) Cutting length 62 in "
MS-25-10 STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere in the stroke the ram returns to "up" position. Two
Steel Nipples. Nipples & Fittings. Black and Galvanized Steel Nipples. Black and Galvanized. Steel Nipples. 142
PRODUCT SPECIFICATIONS Welded steel pipe nipples both galvanized an dblack in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe up to 120. TECHNICAL SPECIFICATIONS Standards:
SECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
ANDERSON GREENWOOD SAFETY SELECTOR VALVE
A dual pressure relief device system that provides a safe, efficient method of switching from an active PRV to a standby, maintaining system overpressure protection FEATURES GENERAL APPLICATION Safety
Mueller Gas Products. Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI MUELLER NO-BLO
ANSI B16.25 Fig. 1 - Maximum Envelope for Welding End Transitions
Fig. 1 - Maximum Envelope for Welding End Transitions Notes: 1 - Where transitions using maximum slope do not intersect inside or outside surface, as shown by phantom outlines, maximum slopes shown or
MS HYDRAULIC GUILLOTINE SHEAR
MS-25-10 HYDRAULIC GUILLOTE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere
Stock Programme Scope of Supply. v
Scope of Supply v2.10 2018 Pipe: Seamless Stainless Steel ASTM A312 ASME B36.19 TP316/316L DN15 DN250 10S 160 Stainless Steel ASTM A312 ASME B36.19 TP304/304L DN15 DN200 10S 160 Low Temp ASTM A333 ASME
SECTION CABLE TRAYS
SECTION 16139 CABLE TRAYS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
STEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
ALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
THERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED
age 1 of 5 THERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED A thermowell is a thermally conductive socket recommended to: rotect the delicate instrument sensing elements against corrosive effects.
SECTION IDENTIFICATION OF PLUMBING, PIPING AND EQUIPMENT. A. Section includes nameplates, tags, stencils and pipe markers.
SECTION 22 05 53 IDENTIFICATION OF PLUMBING, PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes nameplates, tags, stencils and pipe markers. B. Related Sections: 1. Section 09 05 00
SECTION IDENTIFICATION OF HVAC PIPING AND EQUIPMENT. A. Section includes nameplates, tags, stencils and pipe markers.
SECTION 23 05 53 IDENTIFICATION OF HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes nameplates, tags, stencils and pipe markers. B. Related Sections: 1. Section 09 05 00 Common
1. ASME A Scheme for the Identification of Piping Systems.
SECTION 40 05 53 - IDENTIFICATION FOR PROCESS PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe markers. 5. Labels. 6. Lockout devices. B. Related Requirements:
I-VICFLEX.VS1. Victaulic VicFlex Style VS1 Dry Sprinkler WARNING WARNING TECHNICAL DATA BEND CHARACTERISTICS INSTALLATION INSTRUCTIONS SIDEWALL
INSTALLATION INSTRUCTIONS I-VICFLEX.VS1 Victaulic VicFlex Style VS1 Dry Sprinkler SIDEWALL Y Read and understand all instructions before attempting to install any Victaulic VicFlex Style VS1 Dry Sprinklers.
WESTBROOK. Westbrook Manufacturing Div. Sales Office Houston, Texas Mailing Address: P O Box Houston, Texas Houston, Texas 77020
Name: Westbrook Manufacturing Div. Corporate & 1111 Lockwood Dr Sales Office Houston, Texas 77020 Mailing Address: P O Box 15614 Houston, Texas 77220 Plant: Web Site 1521 Lathrop Houston, Texas 77020 www.westbrookmfg.com
Page 1 of 12 Second Revision No. 5-NFPA 12-2014 [ Section No. 2.3.4 ] 2.3.4 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C 700, West Conshohocken, PA 19428-2959. ASTM A53, Standard
C-Clamps and Lifting Eyes (Eye Bolts)
0-C-Clamps & Lifting Eyes-R 2/21/08 9:42 PM Page 1 C-Clamps A B C Armstrong C-Clamps When your requirements call for clamps, specify Armstrong the most accepted name in the business. When you see Armstrong
NORMATIVE REFERENCES
American National Standards Institute NORMATIVE REFERENCES ANSI C135.30 1988 (expired 1993) Zinc-Coated Ferrous Ground Rod Electrodes for Overhead or Underground Lines American Society for Testing and
RELINER INSIDE DROP SYSTEM SPECIFICATIONS
1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme
Steel Couplings. Product Specifications Welded steel couplings both galvanized and black in diameters from 1/8 up to 4
Merchant Couplings Steel Couplings Merchant Couplings Product Specifications Welded steel couplings both galvanized and black in diameters from 1/8 up to 4 Technical Specifications Standards: Product complies
METRIC FASTENERS 1520 METRIC FASTENERS
1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
METAL SHEAR SPECIALISTS MS-25-5 HYDRAULIC GUILLOTINE SHEAR
MS-25-5 HYDRAULIC GUILLOTE SHEAR MS-25-5 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere
REPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
Lengths [7] Ø.50 [13] [7] [13]
![Lengths [7] Ø.50 [13] [7] [13]](/thumbs/80/81567338.jpg "Lengths [7] Ø.50 [13] [7] [13]")
Dimensions in [ ] are in millimeters Standard (2 1 / 2 6 ) Standard (9 24 ).75 STEM.40 [10] EXTERNAL THREAD.61 [15] 1.00 [25] STEM STEM Ø.44 [11] Threaded-Stepped Shank Standard Stem Length Length (T)
NORMATIVE REFERENCES
American National Standards Institute NORMATIVE REFERENCES ANSI C135.30 1988 (expired 1993) Zinc-Coated Ferrous Ground Rod Electrodes for Overhead or Underground Lines American Society for Testing and
Components of Gauge and Overview:
Cat 30 (Standard) and Cat 31 (Metric) Product Information and Usage Guide (Import) (Metric is used in demonstrations) Metric Standard Components of Gauge and Overview: The CAT 30 (standard) and CAT31 (metric)
ODOT ITB Group 4 Item 33 Qty. 1
ODOT ITB 180-17 Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 34 Qty. 1 ODOT ITB 180-17 Group 4 Item 35 Qty. 1 ODOT ITB 180-17 Group 4 Item 36 Qty. 1 STRUCTURAL BOLTS NUCOR FASTENER TECHNICAL
Operating instructions OI/FPD350-EN Rev. H. FPD350 Torbar Averaging pitot tubes
Operating instructions OI/FPD350-EN Rev. H FPD350 Torbar The Company We are an established world force in the design and manufacture of measurement products for industrial process control, flow measurement,
Mechanical Support Systems, Inc.
Mechanical Support Systems, Inc. CATALOG February, 2014 www.thesmartsupports.com 408.601.0155 1 N E W W E B S I T E.N E W P R O D U C T S Mechanical Support Systems, Inc. is certified as a women s business
From Plate Materials & Services - To To COMPLETE PRESS FRAMES
From Plate Materials & Services - To To COMPLETE PRESS FRAMES Press Press Weldments Weldments & & Assemblies: Assemblies: Superior has Superior has specialized specialized in these in these unique Heavy
SECTION IDENTIFICATION FOR HVAC PIPING, DUCTWORK AND EQUIPMENT
SECTION 23 05 53 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Plastic Nameplates 2. Tags 3. Plastic Pipe Markers 4. Ceiling Tags 5. Detectable Underground Tape 6. Stencils PART 2 - PRODUCTS 2.1 MANUFACTURERS
Fluid Sealing Association
Fluid Sealing Association STANDARD FSA-MG-501-02 STANDARD TEST METHOD FOR INWARD BUCKLING OF SPIRAL-WOUND GASKETS 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania 19087-1866 Phone: (610) 971-4850
SWITCH STAND Switch Stand Assembly Connecting Rod Target Assembly (when required) TURNOUT ACCESSORIES Standard Tie Plates Rail Anchors Joints
Turnouts A turnout is an arrangement of a switch, a frog and closure rails, which diverts rolling stock from one track to another. Because industrial trackwork often handles lighter loads at slower speeds
SECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
A. Radius elbows with a construction radius of 1.5 the duct width are preferred to square elbows.
SECTION 233100 DUCTWORK 1.0 Acoustical duct lining in any part of the duct system is prohibited. All ductwork requiring insulation shall be externally insulated (Refer to the Sheet Metal Ductwork Insulation
CARBON STEEL BUTTWELD FITTINGS STD & XH Carbon Steel Buttweld Pipe Fitting List Prices (SBW-0118)
CARBON STEEL BUTTWELD FITTINGS STD & XH Carbon Steel Buttweld Pipe Fitting List Prices (SBW-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform
Standards and Competencies
Skill Performance The skill performance assessment includes the completion of a metal project and a demonstration of the ability to weld carbon steel, aluminum or stainless-steel project in various using
SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
ONE-LOK Series SLC/SLCE Pipe Restraint for AWWA C909 PVC Pipe
ONE-LOK Series SLC/SLCE Restraint for AWWA Use the SIGMA ONE-LOK Series SLC/SLCE restraint for AWWA pipe at mechanical or push-on joint ductile iron fittings. The ONE-LOK Restraint Systems can successfully
Fabricated Structural Steelwork. Section 8
Fabricated Structural Steelwork Section 8 INDEX DESCRIPTION FIGURE No. PAGE Pipe Shoe Welded Pipe Shoe Welded (Heavy Duty) Pipe Shoe Clamped Pipe Shoe Clamped (Heavy Duty) Inverted Tee Post Upright Tee
SECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
CLAMP MOUNT SKIRTING SYSTEM CLAMP MOUNT/ DURA-SEAL / TRACKEEPER / VACU-SKIRT INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS Check us out at www.asgco.com Customer Service 800-344-4000 800-394-2358
Pipe Product Catalog Table of Contents
Pipe Product Catalog Table of Contents Section A: Drawing #: Page Description A1 Reinforced Concrete Pipe A3 Storm Manhole Sizing Chart (48" - 96") A3.1 Storm Manhole Sizing Chart (108" - 144") A4 48"
Conduit Assemblies. Complex Assembly - FLEXAquick System
ccessories Conduit ssemblies Conduit ssemblies Complex ssembly - FLEXquick System 236 Conduit ssemblies Simple ssembly Finished Products ccessories Conduit ssemblies 237 ccessories Conduits Conduits Straight
MH Series Mitered Frames shall be as manufactured or furnished by Republic Doors and Frames, McKenzie, Tennessee
drywall frames - mh series/mitered SHEET NO. 202 MH Series Mitered Frames shall be as manufactured or furnished by Republic Doors and Frames, McKenzie, Tennessee 38201. Profile - Made for two basic door
STANDARD PHRASEOLOGY SECTION G. 1. This section of standard phraseology is for general use in piping disciplines.
STANDARD PHRASEOLOGY SECTION G 1. This section of standard phraseology is for general use in piping disciplines. Hydrostatically test, using at PSIG for a minimum of minutes. Allowable leakage: None. G1
1. To practice arc welding and produce three parallel lines as shown in Figure To practice arc welding for Butt joint as shown in Figure 2.
1. To practice arc welding and produce three parallel lines as shown in Figure 1. 2. To practice arc welding for Butt joint as shown in Figure 2. Time: 3 hrs Figure 1: Arc welding practice Figure 2: Butt
Welding 2 go. alhuzaim_af [Type the company name] 8/2/2012
![Welding 2 go. alhuzaim_af [Type the company name] 8/2/2012](/thumbs/86/93471492.jpg "Welding 2 go. alhuzaim_af [Type the company name] 8/2/2012")
2012 Welding 2 go alhuzaim_af [Type the company name] 8/2/2012 One must try by doing the thing; for though you think you know it, you have no certainty until you try. - Sophocles 2 I would like to express
Mission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS
The American Society of Mechanical Engineers ì N A M E R I C A N N A T I O N A L S T A N D A R D FACTORY-M AD E WROUGHT BUTTWELDING FITTINGS ASME B16.l-2003 (Revision of ASME BI 8.9.2001) Date of Issuance:
Hydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
SECTION 58 PRECAST CONCRETE BOX CULVERT. This work consists of furnishing and installing Pre-cast Concrete Box Culverts.
SECTION 58 PRECAST CONCRETE BOX CULVERT 58.1 DESCRIPTION A. General This work consists of furnishing and installing Pre-cast Concrete Box Culverts. B. Related Work Section 51 Section 52 Section 53 Section
SECTION MANHOLES
SECTION 02601 MANHOLES PART 1 GENERAL 1.01 SCOPE OF WORK A. WORK required under this section consists of all materials, accessories, equipment, tools, and labor required to install precast concrete standard
Symphony II Adaptable Table System
Symphony II Adaptable Table System 1.00 General 1.01 Conditions 1.02 Scope of work 1. This section covers all materials, equipment, tools and labor for the supply and installation of the laboratory Symphony
.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.
Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems
Make a Safe. Description. Lesson Objectives. Assumptions. Terminology
Youth Explore Trades Skills Make a Safe Description Welding is a vast area in the metalworking field and a widely used joining process for metal. In this activity plan students will learn how to MIG weld
FITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
The Redi-Flange Method. How It Works. Services. Engineering & Costing Assistance
... g n ldi ng... e i W No hread ing! T oov o N Gr o N The Redi-Flange Method Redi-Flange is a method of joining valves, fi ttings and equipment with integral fl anged ends to plain-ended pipe, with all
AUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
Finite Element Analysis per ASME B31.3
Brief Discussion: Split-Body 12in Butterfly valve, Ph: 520-265-3657 Page 1 of 13 Finite Element Analysis per ASME B31.3 Prepared by: Michael Rodgers, P.Eng. Date: July 16, 2010 Page 2 of 13 Section Headings:
IMPROVE SAFETY at the job site
MECHANICAL PROTECTION Protect bolts and nuts from accidental thread damage that may occur during handling, transportation and maintenance CORROSION PREVENTION By covering the exposed part of the bolt and
Testing. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.
907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing
FORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE"
FORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE" BRASS FLARED TUBE FITTINGS "STANDARD FLARE SAE 45 " FITTING CONNECTIONS RANGE Standard MALE FLARE SAE 45 Standard FEMALE FLARE SAE 45 Standard MPT (male
.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation
!"# $%& '()*(+%,-. /#--) 0"+.1%# --- บร ษ ท เอ นไซ กร ป จ าก ด ---
!"# $%& '()*(+%,-. /#--) 0"+.1%# w บรษ w ท w.e เอ น ns ไซ ci กร gr ป ou จ า p. ก ด co -m - --- w บรษ w ท w.e เอ น ns ไซ ci กร gr ป ou จ า p. ก ด co -m - --- Product Specification *Weights and Dimensions
Sheet Metal Brake Plans for a 6' Sheet Metal Brake
Sheet Metal Brake Plans for a 6' Sheet Metal Brake,1752'8&7,21 Thank you for purchasing the sheet metal brake plans. The plans include a complete list of material needed and easy to follow steps to build