Vänerply. Plywood. Quality rooms. Product range. Structural plywood Construction plywood.

Transcription

1 Väner Plywood Quality rooms Product range Structural wood Construction wood

2 MoelvenVäner Leader in wood Väner is Sweden s largest, and one of Europe s leading producers of wood. Our plant in Otterbäcken has a total annual capacity of 9. m 3 of consistently high quality wood. At Väner, we prioritise flexibility, speed, service and technical consultation as well as close and long-term customer relations. Väner is a flexible company and we can adapt to your special desires with short notice. Responsibility for the environment Väner s products are manufactured from renewable raw materials that conserve the earth s resources. They can easily be reused and recycled. Energy use is much less than the processing of steel and pvc. Väner is exempted from the regulations of the Swedish Chemicals Agency regarding formaldehyde since wood is glued using phenol resin glue. It gives minimal formaldehyde elimination as compared with solid wood. Väner AB is quality certified in accordance with iso 91:2. Both environmental and construction declarations are available. Used by the ancients Plywood is not a new invention. It has existed for thousands of years. As early as 3. years ago, the ancient Egyptian Pharaohs built their sarcophagi of glued veneer. In the 1s, furniture makers used the veneer technique to increase sustainability and as decoration. Plywood started being manufactured in Sweden in the early 19s, but at that time was called cross veneer. The combination of strength and weight meant that many airplanes were built from wood in the Second World War. This is our wood The wood is manufactured from rough Swedish spruce/ pinewood. Our wood is manufactured of veneers, normally syetrically built in relation to the centre veneer. Väner is manufactured with an odd number of layers in three, five, seven and nine veneers. The thicknesses of the veneers are 2. and 3.1. Many reasons to choose wood Wood is a natural, easy to work with and durable building material. It has no harmful side effects for the environment or humans during production, use or destruction. Plywood provides better function heat insulation versatility permanence than the majority of other materials, and in addition, at a comparable cost. Many usage areas Väner s structural wood has a series of usage areas. Exactly what type is adapted to what is illustrated in connection with the tables; here are just a few examples. supporting structures and general purposes within the construction, packaging and transport industries supporting and water-drainage roof underlay sheathing in storage areas, garages, etc. packaging sub-floors walls Characteristics Plywood is a reliable construction material. It has high durability and impact resistance, maintains its dimensions even in varying climates and is also easy to screw and nail in without splitting. Plywood has a great ability to withstand shearing, twisting and cupping. Our structural wood is technically well-documented and also equipped with Väner s official quality stamp and is strength approved in both Sweden and abroad. Ergonomically formed Of course there is a difference between wood boards for roofing and flooring, which are 6 and for walls, which are 6 and 9 wide instead of 12. Both construction workers and those of us at Väner believe this. The advantages are that the boards are simpler to handle, weigh less and are more friendly to the body. 2

3 Plywood The complete measurements on the ergonomic roofing and flooring sheets are 24 6 in thicknesses 12, 1, 18, 21 and 24. Tolerances in accordance with ss-en Boards moisture ratio The boards moisture ratio is measured in accordance with en322. Tolerances ap to boards with the moisture ratio (1±2) %. 2. Tolerances on length and width Length and width are measured in accordance with en The tolerance is ± 3. in relation to the nominal measurement. 3. Tolerances on thickness is measured in accordance with en Tolerances are illustrated by the table to the right. 4. Tolerances on edge straightness Edge straightness is measured in accordance with en The tolerance is 1 /m.. Tolerances on squareness Squareness is measured in accordance with en The tolerance is 1 /m. Resistance power against mould growth All qualities can be obtained with basilite treatment that improves resistance against mould growth in exposed constructions. tolerances Nominal (t) thickness 3 2 Unsanded boards. Tolerances for the nominal thicknesses Touch sanded boards. Tolerances for the nominal thicknesses +(,8 +,3 t) +(,2 +,3 t) (,4 +,3 t) (,4 +,3 t) t = thickness Upplands Motor, Uppsala AstraZeneca, Mölndal Swedbank Arena, Malmö 3

4 Swedish Structural wood Strength Class P3 CE 42-CPD-1692 The appearance of the veneer can vary, like the examples on this page, and shall never exceed the limit for maximum allowed defects. Every board is stamped with a strength class, date and standard approval certificate number in accordance with those requirements that are established for standard approval certification. Structuralwood P3 veneer class C Plywood as burglary protection Grading rules maximum allowed defects Insurance companies recoend that walls and ceilings in a building shall be able to withstand burglary attempts. This is yet another usage area for wood, which has become a very competitive alternative to steel plating. Appearance description for veneer class C. Plywood is not only strong but also creates stable walls that are easy to join together. In addition, it is easy to screw into, an advantage when you shall, for example, set up shelves in shop premises, etc. The fact that wood is also easier to mount makes the total cost lower than for steel plating. C+ Solid knots and knotholes may be a maximum of 3. Cracks up to a maximum of 12 wide are allowed. Knot ratio maximum 2%. Touch sanded, sorted, with the best side up. Glue classes Väner s products can be used in all climate classes. Permanence of the straight-glued joints meet the requirements for gluing class 3 in accordance with SS-En 314-2, as well as the requirements for type W.B.P in accordance with BS666 Section 8 and DIn 68:3 BFU1. Väner is exempted from the regulations of the Swedish Chemicals Agency regarding formaldehyde since the values are very low and comparable to solid wood. 4

5 Structuralwood Väner P3, C+/C Touch sanded Construction quality in strength class P3. The boards are manufactured from spruce and/or pinewood. Surface veneers: class C+. Used for: Supporting structures and general purposes within the building, packaging and transport industry where structural wood P3 is required. Väner roofing wood P3, C/C Unsanded, tongue and groove on long sides basilite treated Construction quality in strength class P3 with groove and tongue on the long sides. The boards are manufactured from spruce and/or pinewood. Surface veneers: class C. Basilite treated roof wood. The treatment improves resistance to mould growth in exposed constructions, for example, roofs. Used for: Bearing and water drainage roof underlays for roof coverage of board, rubber sheets, sheet metal, concrete and roofing tiles , , , , , ,4 Also provided in 244x122/61 24 x ,4 24 x 6 1 2, 24 x ,6 24 x ,4 24 x , , , , , ,4 Also provided in 244x122/61 Selection: Tongue and groove on four sides, format 242 x 122 and 242 x 61. Väner blind floors C/C Basilite treated x ,6 Basilite treated wood improves resistance to mould growth in exposed constructions. Väner Blind floors meet the requirements for punching failure security in accordance with the directives from the Occupational Safety Board. Surface veneers: class C.

6 Swedish Structural wood Strength Class P3 CE 42-CPD-1692 The appearance of the veneer can vary, like the examples on this page, and shall never exceed the limit for maximum allowed defects. Structuralwood P3 veneer class CP Grading rules maximum allowed defects Appearance description for veneer class CP. CP Solid knots with a maximum of 3 and open holes maximum 6 wide, cracks maximum 3 wide. Putty filler or filler with wood plugs are allowed. Delivered touch sanded Glue classes Väner s products can be used in all climate classes. Permanence of the straight-glued joints meet the requirements for gluing class 3 in accordance with SS-En 314-2, as well as the requirements for type W.B.P in accordance with BS666 Section 8 and DIn 68:3 BFU1. Väner is exempted from the regulations of the Swedish Chemicals Agency regarding formaldehyde since the values are very low and comparable to solid wood. 6

7 Structuralwood Väner P3, CP/C Touch sanded Construction quality in strength class P3. The boards are manufactured from spruce and/or pinewood. Surfaces are touch sanded. Surface veneers, front side: class CP. Surface veneers reverse side: class C. Used for: Interior and exterior constructions where an appearance with less defects in the outer veneer is desirable, for example, as covering in storage areas, garages, etc , , , , , ,4 Also provided in 244x122/61 Väner flooring wood P3, cp/c Touch sanded Tongue and groove on long sides Construction quality in strength class P3 with groove and tongue on the long sides. A good side without open defects. Surfaces are tried. The boards are manufactured from spruce and/or pinewood. Surface veneers, front side: class CP. Surface veneers reverse side: class C. Used for: Free bearing sub-floors on cross beam ties and beams as well as floating floors in residences and offices. The excellent strength properties make it especially suitable for sub-floors in industrial and warehouse facilities and sports halls. Recoendation: For sub-floors for linoleum, parquet, plastic floor coverings, textile coverings, etc. Selection: Tongue and groove on four sides, format 242 x 122 and 242 x 61. Board thickness Board thickness , , , ,8 24 x ,4 24 x 6 1 2, 24 x ,6 24 x ,4 Also provided in 244x122/

8 Swedish non structural wood sorted in accordance with SS-EN 63-3 Plywood is sorted by appearance in accordance with the above European standards. The appearance of the veneer can vary, like the examples on this page, and shall never exceed the limit for maximum allowed defects. non structural board veneer class En III Grading rules maximum allowed defects Appearance description for construction wood sorted in accordance with European standard ss-en not strength classified. EN III Fresh knots with a maximum of 6 and open holes maximum 4 wide, cracks maximum 1 wide. Glue classes Väner s products can be used in all climate classes. Permanence of the straight-glued joints meet the requirements for gluing class 3 in accordance with SS-En 314-2, as well as the requirements for type W.B.P in accordance with BS666 Section 8 and DIn 68:3 BFU1. Väner is exempted from the regulations of the Swedish Chemicals Agency regarding formaldehyde since the values are very low and comparable to solid wood. 8

9 non structural board Väner En, III/III Unsanded Construction wood is manufactured from spruce and/or pinewood. Surface veneers: class III Used for: Constructions where strength-sorted construction wood, type P3 is not required, but where you still want good strength and moisture stability. The construction wood is used to advantage behind plaster and sheet metal coverings and for packaging. m2/pkg , , , , , , ,4 2 x , x , 11 2 x , x , x , 13 3 x ,4 13 Also provided in 244x122/61 Options Special products, processes and finishes Basilite treatment (that improves resistance against mold growth in exposed constructions, such as roof and blind bottom). Full-sanded. Other formats: 244 x 122 and 2 x 122/12. Long Plywood (maximum dimensions 3 x 12 ). 9

10 Quality rooms Moelven helps create good rooms. Products made of wood share a proud heritage and in many ways bear a uniquely Scandinavian signature. Modern rooms are created with characteristic elements taken from Scandinavian culture and building traditions. Live Scandinavian Scandinavia is the home of the Moelven Group. This is where we run our business, and this is where our most important markets are. It is home to both our employees and our customers. The Scandinavian model has shaped us, and it is the living conditions, the love of natural materials and the human drive to develop in this part of the world that we depend upon. Moelven Wood AB, Box 86, 6 8 Karlstad Tel: , Fax post.wood@moelven.com Moelven Wood