Section 400. Plow Parts MOLDBOARD SHINS LW PLOW SHARES TRASHBOARDS LANDSIDES RIB PLOW SHARES MOLDBOARDS.
|
|
|
- Percival Bell
- 5 years ago
- Views:
Transcription
1 Section 400 Plow Parts MOLDBOARD SHINS LW PLOW SHARES TRASHBOARDS SWITCH SHARES DEEP SUCK SHARES LANDSIDES RIB PLOW SHARES MOLDBOARDS
2 PLOWSHARES *RSO185LP PLOW SHARES RIB PLOW SHARES: The Rib Share is made from a section with a rib running horizontally through the share for extra strength and wear. Rib shares are not available for all plow models. The Rib Share is oil-quenched and heat-treated. Hardfacing is not recommended for Rib Shares. Bolts and nuts not included. LW PLOW SHARES: The LW Long Wear Share is a heavy duty share produced from a full 3/8 section. The long wear share is upset forged at the nose for long, break resistant wear. The LW Share is oil quenched and heat-treated. LW PLOW SHARES HARDFACED: The LW Hardfaced Share is produced from boron steel with a 1/4 chromium carbide point and chromium carbide application on the cutting edge of the share. These are excellent for high abrasion soil conditions. Left Hand and Short Cut Shares available in most makes. Bolts and nuts are included. **Note; Left hand bolts and nuts packed with IHC, DMI, Oliver/White, Wil-Rich and Melroe. Plow Parts 400-2
3 PLOW SHARES for CASE/IH (Rib Shares) *LWI184RP Nuts & Bolts NOT Included MODELS: SUPER CHIEF BOTTOMS 16 Rib Shares RSI164LP RSI164RP 16 Rib Share 16 Rib Share 3/8 x (1) 1/2 (3) 7/16 47 LBS s RSI184LH RSI184RH Left Hand; Hardfaced Right Hand; Hardfaced 3/8 x (1) 1/2 (3) 7/16 RSI184LP RSI184RP 3/8 x (1) 1/2 (3) 7/16 for CASE/IH (LW Shares) MODELS: SUPER CHIEF 16 LONG WEAR SHARES LWI164LP LWI164RP 16 Rock Share 16 Rock Share 3/8 x R R (1) 1/2 (3) 7/16 47 LBS MODELS: SUPER CHIEF 18 LONG WEAR SHARES LWI184LH LWI184RH Left Hand; Hardfaced 18 Rock Share Right Hand; Hardfaced 18 Rock Share 3/8 x R R (1) 1/2 (3) 7/16 47 LBS LWI184LP LWI184RP 18 Rock Share 18 Rock Share 3/8 x R R 46323R (1) 1/2 (3) 7/16 RSI164RP & LWI164RP RSI184RP & LWI184RP Plow Parts 400-3
4 *LWO185LP PLOW SHARES for OLIVER & MINNEAPOLIS-MOLINE: (LW Shares) USE OLIVER/WHITE & WATTS LWO185LH LWO185RH LWO185LP LWO185RP Left Hand; Hardfaced 18 Rock Share LW Right Hand; Hardfaced 18 Rock Share LW 18 Rock Share LW 3/8 x 18 SBP219629BF 3/8 x 18 SBP219629BF (1) 1/2 (4) 7/16 (1) 1/2 (4) 7/16 47 LBS 47 LBS for (LW Shares) MODELS: GENERAL PURPOSE AND HEAVY DUTY SERIES LWFD185LP LWFD185RP 18 Rock Share LW 3/8 x (5) 7/16 54 LBS LWO185RP LWFD185RP Plow Parts 400-4
5 PLOW SHARES *RSJD185RH for JOHN DEERE (Rib Shares) RSJD185LH RSJD185RH RSJD185LP RSJD185RP RSJDM183LH RSJDM183RH Left Hand; Hardfaced Right Hand; Hardfaced Left Hand; Hardfaced Right Hand; Hardfaced MODELS: HS 350, 356,400, SDT & NU BOTTOMS 3/8 x A /8 x A14243 MODELS: METRIC NU-450 BOTTOMS 3/8 x 18 A42808 A30951 Nuts & Bolts NOT Included (1) 1/2 (4) 7/16 (1) 1/2 (4) 7/16 (3) 16mm RSJDM183LP RSJDM183RP 3/8 x 18 A42808 A30951 (3) 16mm for JOHN DEERE (LW Shares) LWJ185LH LWJ185RH LWJ185LP LWJ185RP LJDM183LH LJDM183RH LJDM183LP LJDM183RP Left Hand; Hardfaced 18 Rock Share Right Hand; Hardfaced 18 Rock Share 18 Rock Share 18 Rock Share 18 Left Hand Metric LW Plow Share; Hardfaced 18 Right Hand Metric LW Plow Share; Hardfaced 18 Left Hand Metric LW Plow Share; Plain 18 Right Hand Metric LW Plow Share; Plain MODELS: NU AND NU1048 3/8 x 18 A14243 (3) 7/16 3/8 x 18 A14243 (3) 7/16 MODELS: METRIC NU BOTTOMS; NU400-NU mm 3/8 x 18 A30951, A32217, A32221, A32222, A40407, A40408, 450mm 3/8 x 18 A42806, A42807, A42808 Nuts & Bolts NOT Included (3) 16mm (3) 16mm (3) 16mm (3) 16mm 57 LBS 57 LBS 57 LBS 57 LBS RSJD185RP & LWJ185RP RSJDM183RP & LJDM183RP Plow Parts 400-5
6 *RSMF164LP for MASSEY FERGUSON (Rib Shares) PLOW SHARES Nuts & Bolts NOT Included RSMF164LH RSMF164RH RSMF164LP RSMF164RP RSMF184LP RSMF184RP Left Hand; Hardfaced 16 Rib Share Right Hand; Hardfaced 16 Rib Share 16 Rib Share 16 Rib Share 16 Rib Shares 3/8 x M1 (4) 1/2 3/8 x M1 (4) 1/2 3/8 s /8 x M1 (4) 1/2 47 LBS 47 LBS for MASSEY FERGUSON (LW Shares) LWMF164LP LWMF164RP 16 Rock Share LW 16 Rock Share LW MODELS: N BOTTOM 16 Rock Shares 3/8 x M1 (4) 1/2 18 Rock Shares 47 LBS LWMF184LP LWMF184RP 3/8 x M1 (4) 1/2 RSMF164RP & LWMF164RP RSMF184RP & LWMF184RP Plow Parts 400-6
7 PLOW SHARES *LWM164RP for MELROE (LW Shares) LWM164LP LWM164RP LWM184LP LWM184RP 16 Rock Share LW 16 Rock Share LW 18 Rock Share LW 18 Rock Share LW MODELS: OLIVER STYLE BOTTOMS 16 Rock Shares # OF BOLT HOLES & HOLE SIZES 3/8 x 16 (4) 7/16 3/8 x (4) 7/16 18 Rock Shares 3/8 x 18 (4) 7/16 3/8 x (4) 7/16 47 LBS 47 LBS for OLIVER/WHITE (Rib Shares) Nuts & Bolts NOT Included s RSO185LH RSO185RH Left Hand; Hardfaced Right Hand; Hardfaced 3/8 x BS (1) 1/2 (4) 7/16 52LBS RSO185LP RSO185RP 3/8 x BS (1) 1/2 (4) 7/16 52LBS LWM164RP & LWM184RP RSO185RP Plow Parts 400-7
8 *RSW184LP for (Rib Shares) PLOW SHARES Nuts & Bolts NOT Included RSW184LH RSW184RH RSW184LP RSW184RP for LWR184LP LWR184RP Left Hand; Hardfaced Right Hand; Hardfaced (LW Shares) Left Hand: Plain 18 Rock Share LW 18 Rock Share LW s 3/8 x (4) 1/2 3/8 x (4) 1/2 MODELS: DEEP-TILL BOTTOM 3/8 x (4) 1/2 52LBS 52LBS 52LBS RSW184RP & LWR184RP CHECK OUT OUR WEBSITE! Learn about Norwest Manufacturing View our Online Catalog View our Special Promotions Print an Updated Catalog Plow Parts 400-8
9 DEEP SUCK SHARES *LIH184RP DEEP SUCK SHARES: Deep Suck Shares are manufactured using high-carbon, heat-treated steel. The special design includes a long nose for superior penetration and suction. The deep suck plow share is ideal for use on tougher soils where it is difficult to keep the plow in the ground or when deeper penetration is desired. Available Hardfaced or Left Hand upon request. Sold without fasteners. for CASE/IH Nuts & Bolts NOT included LIH164LH LIH164RH LIH164LP LIH164RP LIH184LH LIH184RH LIH184LP LIH184RP 16 Left Hand Deep Suck Plow Share; Hardfaced 16 Right Hand Deep Suck Plow Share; Hardfaced 16 Left Hand Deep Suck Plow Share; Plain 16 Right Hand Deep Suck Plow Share; Plain 18 Left Hand Deep Suck Plow Share; Hardfaced 18 Right Hand Deep Suck Plow Share; Hardfaced 18 Left Hand Deep Suck Plow Share; Plain 18 Right Hand Deep Suck Plow Share; Plain 16 DEEP SUCK SHARES 3/8 x 4-1/8 x R (1) 1/2 (3) 7/ LBS 3/8 x 4-1/8 x R (1) 1/2 (3) 7/ LBS 18 DEEP SUCK SHARES 3/8 x 4-1/8 x 18 3/8 x 4-1/8 x R R R R (1) 1/2 (3) 7/ LBS (1) 1/2 (3) 7/ LBS LIH184RP Plow Parts 400-9
10 *WO-9 MOLDBOARD SHINS MOLDBOARD SHINS: Moldboard Shins are made of 5/16 high carbon steel, oil-quenched and heat-treated. Nuts and bolts included. for CASE/IH MODELS: NEW 18, T WO-9 Right Hand Shin 5/16 x 18 T (2) 7/16 WO-9-L Left Hand Shin 5/16 x 18 (2) 7/16 MODELS: SUPER CHIEF 21.5 LBS 21.5 LBS WI-25 Right Hand Shin 5/16 x 14, 16, 18 or R C R (2) 7/16 24 LBS WI-25-L Left Hand Shin 5/16 x 14, 16, 18 or C C1 (2) 7/16 24 LBS for DMI MODELS: HYDRA -WIDE WO-9 Right Hand Shin 5/16 x 16 & (2) 7/16 WO-9-L Left Hand Shin 5/16 x 16 & 18 (2) 7/16 21 LBS 21 LBS WO-9 WI-25-L Plow Parts
11 MOLDBOARD SHINS *WD-29-L for JOHN DEERE MODELS: NU1036, NU1046, NU1048 WD-3 Right Hand Shin 5/16 x A15594 (2) 7/16 WD-3-L Left Hand Shin 5/16 x A15606 (2) 7/16 MODELS: HS314, 324, 354, 434, 444, 534, 544 WD-5 14 Right Hand Shin 5/16 x 14 A14700 (2) 7/16 WD-5-L 14 Left Hand Shin 5/16 x 14 A14701 (2) 7/16 MODELS: NU400-NU450 METRIC SERIES WD-29 Right Hand Shin; Metric 5/16 X A30129 (2) 7/16 WD-29-L Left Hand Shin; Metric 5/16 X (2) 7/16 26 LBS 26 LBS 23 LBS 23 LBS 28 LBS 28 LBS for MASSEY FERGUSON MODELS: N BOTTOM & N HEAVY DUTY WMFS Right Hand Shin 5/16 x 14, 16 or M M1 (2) 7/16 WMFSL Left Hand Shin 5/16 x 14, 16 or (2) 7/16 21 LBS 21 LBS WD-3 WD-5L WD-29 WMFSL Plow Parts
12 *WO-7 MOLDBOARD SHINS for MELROE MODELS: OLIVER STYLE BOTTOMS WO-9 Right Hand Shin 5/16 x 14, 16 & P14617 (2) 7/16 WO-9-L Left Hand Shin 5/16 x 14, 16 & 18 (2) 7/16 21 LBS 21 LBS for OLIVER & MINNEAPOLIS MOLINE & WATTS MODELS: NL SERIES (Minneapolis Moline) & GENERAL PURPOSE (National David Brown) WO-9 Right Hand Shin 5/16 x 14, (2) 7/ LBS WO-9-L Left Hand Shin 5/16 x 14, 16 (2) 7/ LBS WO-9 WO-9-L Remember when replacing one part on a plow, it may be necessary to loosen other parts to allow for wear. For example, when replacing the shin, it may be necessary to loosen the moldboard and the share to allow the new part to fit. Then simply tighten other parts when proper alignment is achieved. Plow Parts
13 MOLDBOARD SHINS *WO-8-L for OLIVER/WHITE MODELS: SPEEDEX 919 SERIES WO-7 Right Hand Shin 5/16 x 14, 16 or BS (2) 7/16 WO-7-L Left Hand Shin 5/16 x 14, 16 or 18 (2) 7/16 MODELS: 225 & WO-8 Right Hand Shin 5/16 x 12, 14, 16 or 18 EP7488C (2) 3/8 WO-8-L Left Hand Shin 5/16 x 12, 14, 16 or 18 EP7488C MODELS: 219, 419, 519, 619, 719 (2) 3/8 WO-9 Right Hand Shin 5/16 x 12, 14, 16 or 18 EP7490C (2) 7/16 WO-9-L Left Hand Shin 5/16 x 12, 14, 16 or BS (2) 7/16 for WO-9 Right Hand Shin 5/16 x 16 or 18 MODELS: GENERAL PURPOSE & HEAVY DUTY A (2) 7/16 WO-9-L Left Hand Shin 5/16 x 16 or 18 (2) 7/16 MODELS: IH BOTTOM WI-25 Right Hand Shin 5/16 X (2) 7/16 WI-25-L Left Hand Shin 5/16 X 18 (2) 7/ LBS LBS 19 LBS 19 LBS 21.5 LBS 21.5 LBS 21.5 LBS 21.5 LBS 24 LBS 24 LBS WO-7 WO-8-L WO-9 WI-25-L Plow Parts
14 TRASHBOARDS *TBUV TRASHBOARDS: Trashboards are made of 5/16 thick steel, heat treated, and available in left or right hand. They are sold complete with bolts and nuts. for CASE/IH MODELS: SUPER CHIEF TBIH Trashboard 5/16 (2) 3/8 TBIH-L Trashboard 5/16 (2) 3/ LBS 31.5 LBS for JOHN DEERE TBJD TBJDL MODELS: HS356, 400, 500, & SDT; NU & NU1048; NU400-NU450 METRIC SERIES Right Hand Trashboard (Metric) Left Hand Trashboard (Metric) 5/16 (2) 7/16 5/16 (2) 7/16 31 LBS 32 LBS for ALLIS CHALMERS, OLIVER/WHITE Will Also Fit: NEWER CASE, FORD, MELROE & WIL-RICH MODELS: ALLIS CHALMERS: 387 SERIES (Dropped Front Hole); MELROE: OLIVER STYLE BOTTOMS, 987 SERIES; OLIVER/WHITE: 588 & 598 SERIES (Deep-till Bottom), 625, 425 & 225 SERIES; OLIVER: R419 & R619 SERIES; WIL-RICH: OLIVER STYLE BOTTOM & DEEP-TILL BOTTOM. TBUV Right Hand Trashboard 5/16 (2) 3/8 32 LBS TBUVL Left Hand Trashboard 5/16 (2) 3/8 32 LBS *TBJD Right Hand Trashboard (Metric) 5/16 *Fits John Deere & Wil-Rich Plows (2) 7/16 31 LBS Norwest Part # TBIH/TBIH-L Norwest Part # TBJD/TBJDL Norwest Part # TBUV/TBUVL Plow Parts **Right Hand Trashboards Shown.
15 LANDSIDES & WEAR PADS LANDSIDES: DON T SEE WHAT YOU NEED? WE CAN CUSTOM FABRICATE MOST LANDSIDES! Landsides are either drop forged or sheared, depending upon configuration. Landsides are made of high carbon steel, oil-quenched and heat-treated. Sold complete with bolts and nuts. for CASE/IH 058UV 058UVL L Z-59057XL for rear plow bottom Right Hand Landside Wear Plate Left Hand Landside Wear Plate Right Hand Inner Landside Plate Left Hand Inner Landside Plate Right Hand Inner Landside Plate: Nuts & Bolts Not Included MODELS: SUPER CHIEF & HOLE SIZES 1/ (2) 7/16 1/ (2) 7/16 MODELS: ALL BOTTOMS 1/ C 1/ C 1/ C (1) 7/16 (2) 1/2 (1) 7/16 (2) 1/2 22 LBS 22 LBS 45 LBS 45 LBS (5) 9/16 (1) 1-1/2 11 LBS EACH Z-59057XLL for rear plow Left Hand Inner Landside Plate: Nuts & 1/ C (5) 9/16 (1) 1-1/2 11 LBS EACH Z-59057XL UV The 59057/back plate, 058UV/wear pad assembly can be used to replace the older 342 front & 343 rear landside by using the 59057/058UV for both front & rear : (A) 7/16 x 1-1/2 CH (B) 1-1/4 Hole (C ) 1/2 Hole Plow Parts
16 LANDSIDES & WEAR PADS for JOHN DEERE 47716W 47716WL Right Hand Landside Wear Pad; (3) Hole Left Hand Landside Wear Pad; (3) Hole Landside Wear Pad; (2) Hole MODELS: NU400-NU450 METRIC SERIES 1/2 Wear Pad A45226 (3) 5/8 1/2 Wear Pad (3) 5/8 MODELS: SWITCH PLOW 1/ (2) 1/2 53 LBS 53 LBS 24 LBS for MASSEY FERGUSON MODELS: N BOTTOM (OLDER N SERIES) 002W Front Landside 1/ M1 (2) 7/16 (1) 5/8 003W Rear Landside 1/ M1 (2) 7/16 (1) 5/8 475WR Right Hand; Front or Rear Landside MODELS: N BOTTOM (NEWER N SERIES & 88 SERIES) 1/ M1F M1R (2) 7/16 (1) 5/8 (2) 1/2 Plain Hole 50 LBS 50 LBS 60 LBS -- For Left Hand Landsides, order 475WR, flip over and use carriage bolts to mount W 475WL Plow Parts
17 LANDSIDES & WEAR PADS for MELROE 847W 847WL Right Hand Landside Wear Pad Left Hand Landside Wear Pad MODELS: OLIVER STYLE BOTTOMS 1/2 Wear Pad (2) 7/16 1/2 Wear Pad (2) 7/16 22 LBS 22 LBS for OLIVER & WATTS 270WA New Style 270WA-L New Style 058UV 058UVL Z-WATTLSR Z-WATTLSL Right Hand Landside use 058UV wear pad Left Hand Landside use 058UVL wear pad Right Hand Landside Wear Plate Left Hand Landside Wear Plate Right Hand Landside Nuts & Bolts Not Included Left Hand Landside Nuts & Bolts Not Included MODELS: R419 & R619 1/ B (3) 5/8 (1) 7/16 1/2 (3) 5/8 (1) 7/16 1/2 (2) 7/16 1/2 (2) 7/16 57 LBS 57 LBS 22 LBS 22 LBS 1/2 (2) 5/8 (2) 7/ LBS EACH 1/2 (2) 5/8 (2) 7/ LBS EACH 847W 270WA-L 058UVL Z-WATTLSR Plow Parts
18 *R419-R MOLDBOARDS MOLDBOARDS: Moldboards are offered for plow bottoms using blade type shares. The solid steel moldboards offer the farmer an economical moldboard with the same top quality as our other products. These moldboards are recommended for all types of soil where scouring is not a problem. All moldboards are oil-quenched and heat-treated. Moldboards come complete with bolts and nuts. for DMI MODELS: HYDRA WIDE R419-R Right Hand Moldboard 5/16 x 16 or (5) 7/16 30 LBS R419-R619-16L Left Hand Moldboard 5/16 x 16 or L (5) 7/16 30 LBS for CASE/IH MODELS: SUPER CHIEF ** Right Hand Moldboard 5/16 x 16, 18, & R R 58996C (4) 7/16 33 LBS Left Hand Moldboard 5/16 x 16, 18, & L (4) 7/16 33 LBS High Back Moldboard 5/16 x (4) 7/16 34 LBS ** HIGH SPEED R419-R Plow Parts
19 MOLDBOARDS *NU1048L for JOHN DEERE MODELS: NU1048 NU1048 Right Hand Moldboard 5/16 x 18 A17431 (8) 7/16 38 LBS NU1048L Left Hand Moldboard 5/16 x 18 A17432 (8) 7/16 38 LBS MODELS: NU400-NU450 METRIC SERIES Right Hand Metric Moldboard 5/16 x (4) 7/16 38 LBS 32209L Left Hand Metric Moldboard 5/16 x 18 (4) 7/16 38 LBS for MASSEY FERGUSON Right Hand Moldboard 5/16 x 16 MODELS: N BOTTOM M (5) 7/16 29 LBS L Left Hand Moldboard 5/16 x L (5) 7/16 29 LBS for MELROE MODELS: OLIVER STYLE BOTTOMS R419-R Right Hand Moldboard 5/16 x (5) 7/16 30 LBS R419-R619-16L Left Hand Moldboard 5/16 x L (5) 7/16 30 LBS NU L R419-R619-16L Plow Parts
20 * MOLDBOARDS for MINNEAPOLIS MOLINE & DAVID BROWN MODELS: NL SERIES (Minneapolis Moline) & GENERAL PURPOSE (National David Brown) R419-R Right Hand Moldboard 5/16 x 16 20P42 HS-139 (5) 7/16 30 LBS R419-R619-16L Left Hand Moldboard 5/16 x 16 (5) 7/16 30 LBS for OLIVER MODELS: R419 & R619 R419-R Right Hand Moldboard 5/16 x 16 R (5) 7/16 30 LBS R419-R619-16L Left Hand Moldboard 5/16 x 16 R419-16L (5) 7/16 30 LBS for R419-R Right Hand Moldboard 5/16 x 16 MODELS: OLIVER STYLE BOTTOM A4258 (5) 7/16 30 LBS R419-R619-16L Left Hand Moldboard 5/16 x 16 (5) 7/16 30 LBS R419-R R419-R619-16L Plow Parts
21 SWITCH PLOW PARTS * SWITCH PLOW SHARES: Switch plow shares are designed and manufactured to use with the new two-way plows such as John Deere, Harrell, Long, and others. SWITCH PLOW PARTS: Switch plow parts are manufactured using high-carbon, heat-treated steel. Moldboards and shins are manufactured using solid steel. Landsides are packed with required nuts and bolts. All other parts are sold without fasteners. for HARRELL Nuts & Bolts NOT included except Landsides Moldboard ; Plain 19-7/8 x 17-1/2 x 1/ (8) 1/2 Plow Head 30 LBS RSH79006 Ribbed Switch Share; Plain 27-1/2 x 3/ (5) 7/16 Plow Head 11.5 LBS SWH79006 Double-End Share; Plain (5) 1/2 Plow Head 11.5 LBS SWH79028 Double-End Share; Hardfaced (5) 1/2 Plow Head 12 LBS Shin (Lower); Chrome LBS Shin (Upper); Steel 5/ LBS 79010W 79206W Landside (Short); Plain Landside (Long); Plain 4 x 6-1/2 x 1/ W (2) 9/16 Plow Head 4 x 13 x 1/ B (4) 9/16 Plow head 23 LBS 46 LBS Switch Moldboard For Harrell Part # Landside (Long) For Harrell Part # 79206W Landside (Short) For Harrell Part # 7910W Double-End Share For Harrell Part # RSH79006/SWH79006 Plow Parts
22 *79010W SWITCH PLOW PARTS for LONG Nuts & Bolts NOT included except Landsides SWL Double-End Share; Plain 4-1/2 Wide B SWL W for JOHN DEERE Double-End Share; Hardfaced Landside (Short); Plain 4-1/2 Wide B x 6-1/2 x 1/ W (5) 9/16 Plow Head (5) 9/16 Plow Head 12 LBS Nuts & Bolts NOT included except (2) 9/16 Landsides. 23 LBS Plow Head Nuts & Bolts NOT included 11.5 LBS Moldboard; Plain 19-7/8 x 17-1/2 x 5/16 P (6) 1/2 Plow Head 21 LBS RSD57270 Ribbed Switch Share; Plain 4-1/2 x 27-1/2 x 3/8 RSD57270 (4) 7/16 Plow Head 11.5 LBS SWD57270 Double-End Share; Plain 4-1/2 x 27-1/2 x 3/8 SWD57043 Double-End Share; Hardfaced 4-1/2 x 27-1/2 x 3/ (4) 1/2 Plow Head 11.5 LBS (4) 1/2 Plow Head 12 LBS Reversible Landside; Plain 8 x 11-1/2 x 5/16 P57522 (4) 1/2 Plow Head 8.1 LBS Shin (Left Hand) 5/16 P (3) 7/16 Plow Head Shin (Right Hand) 5/16 P57266 (3) 7/16 Plow Head Double-End Share For Long: Part # SWL LBS 5.6 LBS Two-Way Moldboard & Shins For John Deere: Part # Landside (Short) For Long: Part # 7910W Reversible Landside For John Deere: Part # Double-End Share For John Deere: Part # RSD57270/SWD57270 Plow Parts
23 *57264 SWITCH PLOW PARTS *57266 * W 79206W CONSERVATION DEEP- TILL SYSTEM CONSERVATION DEEP TILL SYSTEM: The Conservation Deep-Till System is proven to provide the ideal combination of deep tillage, soil mixing, and proper management of nutrients while meeting most conservation guidelines. These special moldboards convert your existing plow into a conservation tillage tool by allowing 35%-65% of crop residue to stay on the surface while shattering and mixing all soil at a depth of up to 14. Residue amounts and tillage depths will vary depending on the make and model of the plow, field conditions and the adjustment of your machine. The conservation deep-till system replaces only the moldboard on the plows listed below. Conservation moldboards are manufactured using high-carbon, heat-treated steel. Nuts & Bolts Included. CONSERVATION MOLDBOARDS TO FIT OEM # BOTTOM SIZE IH SUPER CHIEF 700 & 800 SERIES JD NU-1048 SERIES (Right Hand) JD NU-1048 SERIES (Left Hand) OLIVER/WHITE; some DMI, CASE & FORD with OLIVER BOTTOMS OLIVER/WHITE; some DMI, CASE & FORD with OLIVER BOTTOMS , OR 16 & LBS A17431 NU LBS A17431 NU1048L LBS R419, R619 R419-R LBS R419, R619 R419-R619-16L LBS Plow Parts
24 PLOW BOLTS & NUTS DESCRIPTION BCH12138L 1/2 X 1-3/8 LEFT HAND CLIPPED HEAD BOLT DESCRIPTION BCH12138R 1/2 X 1-3/8 RIGHT HAND CLIPPED HEAD BOLT BHN12L 1/2 LEFT HAND NUT BCH716112L 7/16 X 1-1/2 LEFT HAND CLIPPED HEAD BOLT BHN12R 1/2 RIGHT HAND NUT BCH716112R 7/16 X 1-1/2 RIGHT HAND CLIPPED HEAD BOLT BHN716L 7/16 LEFT HAND NUT BCH76114L 7/16 X 1-1/4 LEFT HAND CLIPPED HEAD BOLT BHN716R 7/16 RIGHT HAND NUT BCH /16 X 1-1/4 RIGHT HAND CLIPPED HEAD BOLT FPB X 3 PLOW BOLT BCHM16M40 16MM X 40MM RIGHT HAND CLIPPED HEAD BOLT FPB /2 X 1-1/2 PLOW BOLT BCNM16 16MM RIGHT HAND METRIC NUT FPB /2 X 2 PLOW BOLT FPB /2 X 2-1/2 PLOW BOLT DESCRIPTION FPB /2 X 3 PLOW BOLT DESCRIPTION FPB /4 X 2 PLOW BOLT FPB /8 X 2 PLOW BOLT FPB /4 X 2-1/2 PLOW BOLT FPB /8 X 2-1/2 PLOW BOLT FPB /4 X 3 PLOW BOLT FPB /8 X 3 PLOW BOLT FPB /8 X 1-1/2 PLOW BOLT FPB /16 X 1-1/4 PLOW BOLT FPB /8 X 2 PLOW BOLT FPB /16 X 1-1/2 PLOW BOLT FPB /8 X 2-1/2 PLOW BOLT FPB /16 X 2 PLOW BOLT FPB /8 X 3 PLOW BOLT FPB /16 X 2-1/2 PLOW BOLT FPB /16 X 3 PLOW BOLT Plow Parts
3 MAIN TYPES OF MOLDBOARD PLOWS: 1) ONE WAY PLOW
Shares & Parts The moldboard plow, the old reliable workhorse of the farming industry, was designed with the purpose of completely turning the soil over to a cut depth of from 8 to 14 inches. This helps
SOLUTIONS FOR THE TOUGHEST PROBLEMS IN AG
RangeLine Group SOLUTIONS FOR THE TOUGHEST PROBLEMS IN AG RESIDUE MANAGEMENT 2940 Air Adjust Residue Manager patent pending FERTILIZER APPLICATION NEW! 2967 Screw Adjust for Depth Control 2967 TITAN Combo
Coulter Blades Reference Information
Coulter Blades Reference Information Bolt / Hole Pattern Reference Information. Fits Allis Chalmers - Duetz Allis. Coulters Available In: Fluted, and wavee. Fits older Case plows. (Before Case-IH). Fluted
Coulter Blades Reference Information
Coulter Blades Reference Information Bolt / Hole Pattern Reference Information. Fits Allis Chalmers - Duetz Allis. Coulters Available In: Fluted, and wavee. Fits older Case plows. (Before Case-IH). Fluted
SCH Easy Cut II Cutting System
SCH Easy Cut II Cutting System The SCH Easy Cut II Conversion Kits is a universal cutting system that can be used in any type of crop in the world of agriculture. With the use of spring steel guards, completely
CONTENTS CULTIVATION AGRITUF POINTS THE BEST IN THE WORLD SUBSOIL POINTS POTATO MACHINERY OEM INDEX
PRODUCT C ATA L O G U E CONTENTS 03 04 AGRITUF THE BEST IN THE WORLD 22 25 25 26 27 27 CULTIVATION SWEEP REVERSIBLE DANISH S-TINE CONSERTINE VIBRO FLEX 06 08 12 16 20 SUBSOIL SUPERRIP MULTIRIP CHROMIUM
ESCO Corporation. ESCO Engineered Products
ESCO Blade Products ESCO Corporation With a history of proprietary products and a reputation for engineering and metallurgical expertise, ESCO is a leading manufacturer of technically-rich ground engaging
Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
PLOW MOUNT KIT FOR CAN-AM MAVERICK P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR CAN-AM MAVERICK P/N 34-7030 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
ASSEMBLY & INSTALLATION INSTRUCTIONS
ASSEMBLY & INSTALLATION INSTRUCTIONS VEHICLE MOUNT KIT 118 AND VEHICLE CENTER MEMBER 6050 TO FIT 2008 & LATER FORD F250-F550 4X4 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International,
Steel Construction Tools
F o r P Steel Construction Tools r o f e s s i o n a l s. Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These
Installation Manual. Things to remember - Page 2 The Technotill Seeding System. - Page 3 Assembling an Opener
Installation Manual Things to remember - Page 2 The Technotill Seeding System - Page 3 Assembling an Opener - Page 4 Technotill Seeding System Installation - Page 5 Opener Position and Packer Plate Angle
Installation Manual. Things to remember. - Page 3 - The Technotill Seeding System. Assembling an Opener. - Page
Installation Manual Things to remember - Page 1 - The Technotill Seeding System - Page 2 - Assembling an Opener - Page 3 - Technotill Seeding System Installation - Page 4 Opener Position and Packer Plate
PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
Spotting Quality. Your guide to sourcing high quality fasteners. How can we help you today?
Spotting Quality Your guide to sourcing high quality fasteners. How can we help you today? Getting what you pay for. When sourcing plow bolts, or any fastener for that matter, it is easy to choose price
INSTALLATION INSTRUCTIONS PART#:17A045200MSS\17A045200MA MODULAR GRILL GUARD FOR FORD SUPER DUTY F250/F
INSTALLATION INSTRUCTIONS PART#:17A045200MSS\17A045200MA MODULAR GRILL GUARD FOR FORD SUPER DUTY F250/F350 08-09 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard
Kennametal. Dual-Carbide-Insert grader blades with new improved braze. Kennametal mining grade carbide insert on face resists impact and erosion.
Kennametal Dual-Carbide-Insert grader blades with new improved braze NEW & IMPROVED NOW AVAILABLE IN 5 FOOT LENGTHS!! Kennametal mining grade carbide insert on face resists impact and erosion. Kennametal
ESCO Corporation Engineered Products Sustainable Business Practices
ESCO Blade Products ESCO Corporation ESCO is a leading manufacturer of technically-rich metal wearparts and components for mining, construction, power generation and aerospace applications. Throughout
Pacal Blades. Products
Pacal Blades Products ESCO Corporation With a history of proprietary products and a reputation for engineering and metallurgical expertise, ESCO is a leading manufacturer of technically-rich ground engaging
MODEL H-9 HEAVY DUTY BENCH-TYPE UNDERCUTTER INSTRUCTIONS
MODEL H-9 HEAVY DUTY BENCH-TYPE UNDERCUTTER INSTRUCTIONS CAPACITY: Between centers - 32" long x 12" diameter. Between roller V- supports - 35" long x 17" diameter. Maximum armature weight - 200 lbs. SAW
FORD MOUNT INSTALLATION INSTRUCTIONS
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 67449 FORD MOUNT INSTALLATION INSTRUCTIONS Bronco, F-150/250/350 4X4 1992-1996 and Ford F-250 2WD (over 8,500 GVWR) Ford F-350 2WD (over
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
Produce Growing Equipment
Produce Growing Equipment Part I Centre County, PA Please email the model number for current pricing to Seeders Jang Seeders Jang Hand Seeders uses Modern Technology to Singulate Seeds Saves Time and Money!
Motor Graders Page 2Q
Section Contents Page Tungsten Carbide Cutting Edges...................................10-02 Flat Carbide Insert Edges........................................10-02 Rotating Bit System.............................................10-03
PLOW MOUNT KIT FOR KAWASAKI TERYX, YAMAHA RHINO P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR KAWASAKI TERYX, YAMAHA RHINO P/N 34-2025 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be
Order No. Width Bolt Hole Description Stock Retail. WK1 1 3/8 Danish Tine Sweep, reversible $2.99
Danish Sweeps Our Danish sweeps are made of heat treated BORON steel.the sweeps have a steel wear bump in front of the bolt holes to help eliminate bolt head wear. 1/4 Thick Danish Sweeps - Single Hole
Pacal Blade Product Specifications
Pacal Blade Product Specifications Table of Contents General Information How To Use This Product Specification Catalog... 3 Welding Instructions... 4 Alloys... 5 Terminology... 5 Product Identification...
INSTALLATION INSTRUCTIONS Product No. MULTI-FIT PICK-UP
INSTALLATION INSTRUCTIONS Product No. You can take it with you. PLYMOUTH, MICH. MULTI-FIT PICK-UP 37034 SMALL PARTS PACKAGE 37424 WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY OCCUR DUE TO OVER TIGHTENING.
CUTTING EDGES & SHOES; TERM CONTRACT. Bid Date: 5/22/08 Contract Period: 6/5/08 9/30/08 Delivery Time: 21 days
06/12/08 Chemung Supply Corp., PO Box 527, Elmira, New York 14902 (607) 733-5506 Five Star Equipment, Inc., 60 Paul Road, Rochester, New York 14624 (585) 235-3011 ABRASION RESISTANT STEEL CUTTING EDGE
Table of Contents Heavy Duty Extra Long Poly Blade
Table of Contents Heavy Duty Extra Long Poly Blade Arctic Heavy Duty Poly Blade 90" & 96" (Blade, Quadrant & A-frame)... 2 Power angling installation.....7 Shock absorber installation....12 Pro-Wings installation..
INSTALLATION INSTRUCTIONS DODGE RAM 2 & 4WD 1500 PART # P5058
INSTALLATION INSTRUCTIONS 2009-13 DODGE RAM 2 & 4WD 1500 PART # P5058 PARTS LIST: Qty Description Qty Description 1 Grille Guard 12 12-1.75mm Hex Nuts 2 Upper Frame Mounting s (for trucks without tow hooks
Assembly & Installation Instructions FOR VEHICLE MOUNT KIT USING VEHICLE CENTER MEMBER
Assembly & Installation Instructions FOR VEHICLE MOUNT KIT 991002 USING VEHICLE CENTER MEMBER 9910092 TO FIT 99 - LATER Chevrolet 2500 Silverado 4x4 and 3500 Pickup 4x4 99 - LATER GM 2500 Sierra 4x4 and
Assembly & Installation Instructions
Assembly & Installation Instructions FOR SUBFRAME COMPONENTS PACKAGE 100760 TO FIT 1-2004 TOYOTA TACOMA 4x4 16-2002 TOYOTA 4 RUNNER 4x4 22 SERIES ONLY 2008 Sno-Way International 7101078B 1. THINK SAFETY,
INSTALLATION INSTRUCTIONS John Deere 600C Corn Head Auger Trough Liner
www.polyskid.com P.O. Drawer 349, Monticello, GA 31064 Phone: 800.542.7659 Fax: 706.468.2881 e-mail: polytech@polyskid.com INSTALLATION INSTRUCTIONS John Deere 600C Corn Head Auger Trough Liner IT IS VERY
APx1 SERIES. 2 Overview
Agrowplow Series APx1 SERIES Table of Contents Overview...3 AP11...4 AP31...5 AP51...6 AP71...8 AP81...10 AP91...12 Co on Bed Renovator...14 Flexi-Roller...16 Specifica ons...18 2 Overview SOIL CARE. IT
Setting the Standard for Wear!
Learn more - www.rhmachine.com R & H Machine makes parts to fit most makes and models of forage harvesting and swathing equipment. Our parts are used both inside the blower and as covers for the skid shoes.
DIVIDING EQUIPMENT DIVIDING EQUIPMENT
64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting
COMMON WRENCHES INTRODUCTION
COMMON WRENCHES INTRODUCTION A wrench is a hand tool used to provide grip and mechanical advantage in applying torque to turn objects usually nuts and bolts. Wrenches allow us to use less force to rotate
OWNER S MANUAL. Safety. Please read this owner s manual before use and keep it at hand for reference. Warranty
Please read this owner s manual before use and keep it at hand for reference. OWNER S MANUAL Safety Important safety instructions for using the INCRA Miter5000 Before using the INCRA Miter5000, read and
UNIVERSAL DOUBLE BAR SAFETY GATE
N. Unit 5 Stour Valley Business Centre, Brundon Lane, Sudbury CO0 7GB Tel: 0787 377 322 - Fax: 0787 377 433 UNIVERSAL DOUBLE BAR SAFETY GATE Reversible Hinge Design EASY INSTALLATION Universal hinge design
Operating, Servicing, and Safety Manual Model " Foot Shear CAUTION: Read and Understand
Operating, Servicing, and Safety Manual Model 3000 52" Foot Shear CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. SAFETY The purpose of the
FORD MOUNT INSTALLATION INSTRUCTIONS
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 64289 June 1, 2003 FORD MOUNT INSTALLATION INSTRUCTIONS Bronco (4X4 only) F-150 (4X4 only), F-250/350 Super Duty 1980 1991 Model No.
Owner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions TQ01 Universal Attic Kit Model No. AT101 IMPORTANT: Before you start, remove Owner's Manual & Assembly Instructions from main carton of your storage building and
MODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
![MODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*](/thumbs/71/66171988.jpg "MODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*")
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
Straight Stringer Installation Instructions
Straight Stringer Installation Instructions Floor-to-Wall Installation F L I G H T P L A N Unpack: What s included? Your Stringer Tread Screws (8) per tread (1) Torque Wrench (1) Socket (for the brackets
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS E-SERIES STEP BARS / 4 OVAL STEP BARS APPLICATION: 2011-2017 Jeep Grand Cherokee PART NUMBER: 23-3610, 23-3615, 21-3610, 21-3615, 23-73610 ITEM QUANTITY DESCRIPTION TOOLS NEEDED
Installation of the JD 900 Series Flex Grain Platform Auger Trough Liner Kit
www.polyskid.com P. O. Drawer 349, Monticello, GA. 31064 Phone: 800-542-7659 Fax: 706-468-2881 E-Mail: polytech@polyskid.com Installation of the JD 900 Series Flex Grain Platform Auger Trough Liner Kit
For more than 25 years, Bourgault Tillage Tools have been at the forefront of innovation and technical development in the tillage and seeding tools
For more than 25 years, Bourgault Tillage Tools have been at the forefront of innovation and technical development in the tillage and seeding tools industry. This was borne out of their own farming and
Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
2. FOLLOW THE INSTRUCTIONS INCLUDED WITH THE SPECIFIC BRACKET PACKAGE THAT YOU ARE USING, TO MOUNT THE BRACKETS TO YOUR VEHICLE.
INSTALLATION INSTRUCTIONS AND PARTS LIST MODEL: 583098, 583102, 583108, 583114, 583125, 584098, 584102, 584114, 584125 O-MEGA II 6 OVAL STEPS UNIVERSAL APPLICATION 1. READ INSTRUCTIONS COMPLETELY AND CHECK
C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS
C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS Thank you for your purchase of the C4 Fabrication s 5th Gen 4Runner Rock Sliders! This product was carefully crafted to ensure a perfect
Best MATERIALS.com Discount Warehouse
Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not
MACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
Chapter 32 - Hood, Deck, Fenders & Running Boards Installation (Video Clip 32)
Chapter 32 - Hood, Deck, Fenders & Running Boards Installation (Video Clip 32) 1166. Polish the hood handle with chrome polish and then install the handle onto the hood. 1167. Use a 10mm socket and from
IIHS Side Impact Outrigger
IIHS Side Impact Outrigger Assembly Procedure Base Assembly (14.3 lbs) The base assembly consists of a ¼ thick steel plate, a ¼ thick piece of polyethylene, and mounting fixtures for the upper and lower
MODEL T " BENCH SHEAR INSTRUCTIONS
MODEL T10051 12" BENCH SHEAR INSTRUCTIONS 1. Overloading this tool can cause injury from flying parts if the tool breaks. Do not exceed the tool capacities. 2. NEVER operate the bench shear without the
TAPTITE Fasteners. High Performance Thread Rolling Screws for Metals
TAPTITE 2000 Fasteners High Performance Thread Rolling Screws for Metals TAPTITE 2000 thread forming technology joins two unique concepts and advances fastener performance to new levels. TAPTITE 2000 fasteners
Rev Disc (DP-8)
4 Disc (DP-8) NO. Description QTY. Spare P/N 1 Top Swivel Bracket 2 60003 2 Main Bearing Carrier 2 60004 3 Main Axle 2 6000 4 Full Spindle 2 60006 Large Dia. Spindle 6 60007 6 Small Dia. Spindle 4 60008
4xGuard Matrix Full System Installation Step by Step
4xGuard Matrix Full System Installation Step by Step by Chirpz It took me a long time to decide to bite the bullet and purchase the 4xGuard Matrix system. It is not the cheapest system out there. Perhaps
Miter Saw Super Stand
Quality Power Tool Accessories OWNER S MANUAL Miter Saw Super Stand Models 2875/2875XL IMPORTANT Read and understand all safety guidelines and instructions carefully before operating. GENERAL INFORMATION
Metal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127
Tel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
Assembly & Operating Instructions Ironmaster IM1500
Assembly & Operating Instructions Ironmaster IM1500 The IM1500 half cage is designed for barbell training with spotting capabilities. The IM1500 is designed to be used in conjunction with Ironmaster products,
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
www.blackcatwearparts.com LOADER Loader Edges & Accessories Weld in Base Edges Bolt on Edges, Ends & Segments Teeth & Adapters Bucket Protection Half Arrow Edges & Segments Top Cover Plates Corner & Side
High Wheel Cultivator Model HWC-243A
High Wheel Cultivator Model HWC-243A Owner s Manual and Parts List SAVE THIS MANUAL You will need this manual for the safety instructions, assembly instructions and parts list. Put it in a safe, dry place
C70 Window Roller Repair Taken from: Heres the problem:
C70 Window Roller Repair Taken from: http://www.volvospeed.com/vs_forum/topic/115086-how-to-c70-window-rollers-permanent-fix/ Heres the problem: This happened to two separate window assemblys on my c70
OWNERS MANUAL. Model No " PLUG AERATOR. CAUTION: Read Rules for Safe Operation and Instructions Carefully
OWNERS MANUAL Model No. 45-0299 48" PLUG AERATOR CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the fastest way to purchase parts www.speedepart.com
INSTALLATION INSTRUCTIONS / DODGE RAM CREW CAB 2500/3500
INSTALLATION INSTRUCTIONS 225019 / 225019-2 2010 DODGE RAM CREW CAB 2500/3500 PARTS LIST: Qty Description Qty Description 1 Driver/Left Side Bar 4 Plastic Square Retainer 1 Side Bar 2 12mm x 120mm Hex
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
INSTALLATION GUIDE N5-DS48-4
INSTALLATION GUIDE N5-DS48-4 Shelving ( steel ) Transit High Roof & Medium Roof Promaster Standard Roof & High Roof Nissan NV High Roof Sprinter Low Roof & High Roof Box Truck / Trailer QUICK START GUIDE
Design a drill jig for drilling 4 holes in the following component.
Design a drill jig for drilling 4 holes in the following component. Design procedure for Jig a. Selection of Jig A leaf (or) latch jig is selected to accomplish this component. The leaf is hinged on one
POWER-Skru Large Diameter Concrete Screw
POWER-Skru Large Diameter Concrete Screw Description The POWER-Skru Large Diameter Concrete Screw is a highstrength screw anchor with self-tapping threads that offer a unique undercutting design for anchoring
PIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
INSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
INSTALLATION MANUAL WEEKENDER STEEL LADDER RACK
TRUCK STORAGE SOLUTIONS SECURING YOUR REPUTATION INSTALLATION MANUAL WEEKENDER STEEL LADDER RACK STEEL & ALUMINUM SIDE BOX WITH PACK RAT DRAWER UNITS MODELS ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS
CLASS # 39 VIPER 15-IN-1 SCREWDRIVER
VIPER 15-IN-1 SCREWDRIVER The Viper 15-in-1 Screwdriver has industrial-grade torx, square, hex, slotted and phillips screwdriver bit sizes combined into one tool and features an EZ Guide collar, retractable
AGCO Cutting Parts - Volume 2 of 2
Hay Products AGCO Cutting Parts - Volume of Product Features / Benefits AGCO offers a variety of popular cutting parts, including knives, sickle sections and assemblies, as well as disc mower knives and
HENSLEY...YOUR WEAR SOLUTIONS SPECIALIST
MINING PRODUCTS TABLE OF CONTENTS Hydraulic Excavator Buckets... 5 Wheel Loaders Buckets... 5 Front Shovel Buckets... 7 Lip Systems...8-9 Cast Lips...8 LHD Edge System...9 XS Tooth System...10-11 TS Tooth
Model POA-CHB-XL50. Assembly and Installation Manual. Projector Bracket. Contents. Be sure to consult with a qualified installation specialist
Assembly and Installation Manual Projector Bracket Model POA-CHB-XL50 Be sure to consult with a qualified installation specialist This bracket is specifically for use with our projector. Be especially
Installation Instructions
Articulating Dual Monitor Mount Stand Installation Instructions UNPACKING Carefully open the carton, remove contents, and place them on a protected surface to avoid damage. Check the parts and the Supplied
INSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: 2007-2010 CHEVY/GMC SILVERADO/SIERRA 2500/3500 (EXCLUDES CLASSIC) APP PART #46-23715, 40-92315/45-92310 MAX WINCH TRAY, SPORTSMAN
IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE 005-07 Cadillac STS Classic 3D Z, Classic Dual Weave, Classic Mesh & Classic Black Mesh Grilles B 7 HR 3 STS Classic 3D Z Grille Part
CTTR Tire Rack Required tools
CTTR Tire Rack Required tools Torque wrench, ratchet, 9/16 socket, tape measure, and square edge. ASSEMBLY REQUIREMENTS *Torque all T-bolt nuts to 35-40 foot pounds. Failure to follow the assembly instructions
C-Clamps and Lifting Eyes (Eye Bolts)
0-C-Clamps & Lifting Eyes-R 2/21/08 9:42 PM Page 1 C-Clamps A B C Armstrong C-Clamps When your requirements call for clamps, specify Armstrong the most accepted name in the business. When you see Armstrong
Installation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating and
SHOREMASTER CANOPY TABLE OF CONTENTS
SHOREMASTER CANOPY PAGE TABLE OF CONTENTS SECTION OWNERS MANUAL Canopy Models: 1684, 16108, 2596, 30108, 40108, 40120, 50120, 20855, 30966, 40966,401066, 501066, 701066. All Hydraulic Lifts 2 Introduction
Steel Construction & Steel Construction & Tools
Steel Construction & Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These tools are exceptionally rugged, with
PRO PLOW and POLY PRO PLOW Snowplows
Western Products, PO Box 245038, Milwaukee, WI 53224 9538 www.westernplows.com May 1, 2014 Lit. No. 6689, Rev. 09 PRO PLOW and POLY PRO PLOW Snowplows Steel Blades 60381, 60390, 60308, 60655 Poly Blades
FOUNDATION AUGERS. FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs
FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs PENGO AUGER SOIL CHART Pengo has developed the chart below to help you decide which auger will be best suited for your project. The above triangles
Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions
Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions INTRODUCTION Congratulations! You are the owner of the finest rotary-style gasket cutter in the world. Originally developed and patented
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For Chevrolet Silverado 1500HD & 2500 Kit 68162 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of
Reamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
ASSEMBLY & INSTALLATION INSTRUCTIONS
ASSEMBLY & INSTALLATION INSTRUCTIONS VEHICLE MOUNT KIT 99101282 AND VEHICLE CENTER MEMBER FOR 26 SERIES: 99100890 TO FIT 2017 - LATER NISSAN TITAN 4X4 Sno-Way, Down Pressure and EIS are registered trademarks
Screwdrivers Nut Drivers Hex Keys Bit Holders and Bits
Screwdrivers Nut Drivers Hex Keys Bit Holders and Bits SCREWDRIVER SETS SET NO. 88819 19 PC. COMBINATION SCREWDRIVER SET 88203 Cabinet Tip 3" 88204 Cabinet Tip 4" 88208 Cabinet Tip 8" 88214 Cabinet Tip
Referencing 0,0 position
Page 1 of 11 TITLE: SABRE X-Axis Lead Screw Replacement Procedure Gerber FastFact #: 2013 Supplied by: Gerber Hardware Support Last Modified: March 1, 2011 Summary: The following procedure explains how
RPS. XR Front Drive Updates CORPORATION
FACTORY CAT 1. To start a replacement of the XR Front Wheel Drive, make sure the machine is on level ground with the rear wheels chocked and always disconnect the batteries. 2. Locate the Positive and
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 63470 For Ford 4x4 F150, F250 Light Duty & Expedition As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message