CRL SPS SERIES - STACKING PARTITION SYSTEM EASY SLIDE - TWO SLIDING PANELS

Transcription

1 EASY SLIDE - TWO SLIDING PANELS TOP OR RAIL SEE SHEETS.0 &.0 FOR AVAILABLE SIZES AND FINISHES /" TEMPERED MONOLITHIC GLASS. SYSTEM ALSO AVAILABLE FOR /8" STANDARD TOP TRACK LLER 0" 0" /8"GAP.0 7/8" 7/8".0 /" GAP /" GAP /8" 7/8" 7/8".0.0 /" GAP /" GAP /" TEMPERED MONOLITHIC GLASS. SYSTEM ALSO AVAILABLE FOR /8" STANDARD TOP TRACK LLER BOTTOM RAIL SEE SHEETS.0 AND.0 FOR AVAILABLE SIZE AND FINISHES ELEVATION VIEW /"='-0" 9/6" 0" 0" SECTION VIEW /"='-0" STRUCTURAL DISCLAIMER: 60 7/6" 6" FLOOR PLAN /"='-0" UGH OPENING.0

2 EASY SLIDE - PARALLEL PARKING NFIGURATION 7/8" 8" 8" 8" " /".0 7/8" 7/8" 7/8" 7/8" 7/8".0.0 /8" /" /" GAP /8" /" GAP /" GAP /" GAP /" TEMPERED MONOLITHIC GLASS. SYSTEM ALSO AVAILABLE FOR /8" LLER POCKET / WALL BOTTOM RAIL SEE SHEETS.0 AND.0 FOR AVAILABLE SIZE AND FINISHES " 8" 0 5/6" /" PARK AREA /" " /6" ELEVATION VIEW /"='-0" SECTION VIEW /"='-0" 6" NOTE: TRACK MUST BE INSTALLED A MINIMUM OF " AWAY FM THE FACE OF WALL IN THE PARKING AREA 6" /" /" 5 7/6" /6" 66 /8" FLOOR PLAN /"='-0" UGH OPENING.0

3 EASY SLIDE - BI-PARKING PIVOT NFIGURATION /6" /6" /8" 0" /6" /6" 0" /8" /" GAP /8" /" /" /" GAP ESPSDTPV0T - BOTTOM PIVOT ESPSDTPV0T - BOTTOM PIVOT ESPCYLKK - EU PFILE CYLINDER LOCK BOTTOM OR RAIL SEE SHEETS.0 AND.0 FOR AVAILABLE SIZE AND FINISHES ESPCYLKK - EU PFILE CYLINDER LOCK ELEVATION VIEW SECTION VIEW /"='-0" /"='-0" 80 7/8" OR SWING CHART I N T E R I O R 5" FLOOR PLAN /"='-0" /6" LHD RHD E X T E R I O R UGH OPENING.0

4 EASY SLIDE - PERPENDICULAR PIVOT NFIGURATION /6" 8 /8" /8" 6" 9" 9" 9" 9" 9" /8" 7/8" 7/8" 7/8" 7/8" 7/8".0.0 7/8" 7/8" 7/8".0 7/8" 7/8" /8" /" GAP /8" /" /" /" GAP ESPSDTPV0T - BOTTOM PIVOT /" /" /" ESPCYLKK - EU PFILE CYLINDER LOCK BOTTOM OR RAIL SEE SHEETS.0 AND.0 FOR AVAILABLE SIZE AND FINISHES /" /" ELEVATION VIEW SECTION VIEW /"='-0" /"='-0" 5/6" OR SWING CHART I N T E R I O R /6" 8 FLOOR PLAN /"='-0" LHD RHD E X T E R I O R UGH OPENING.0

5 MIN. /8"Ø ANCHOR TO BE DETERMINED BY STRUCTURE ENGINEER, " O.C. MAX SHIM AS NEEDED LINE OF SUPPORTING STRUCTURE MIN. /8"Ø ANCHOR TO BE DETERMINED BY STRUCTURE ENGINEER, " O.C. MAX SHIM AS NEEDED LINE OF SUPPORTING STRUCTURE CRL TRACK EXTRUSION CRL TRACK EXTRUSION /8" TRACK DIM. CRL LLER CEILING MATERIAL AND FRAMING /8" TRACK DIM. CRL ESPTTPV0T CEILING MATERIAL AND FRAMING /" CRL BRUSH PILE /" CRL BRUSH PILE CRL /8" THK. S.S. BAR CRL ESPSDTPV0T TOP PIVOT " CRL TOP RAIL - TYPICAL " CRL TOP RAIL - TYPICAL /" MONOLITHIC, TEMPERED FOR /8" GLASS) /" MONOLITHIC, TEMPERED /8" GLASS) OR HEAD - TYPICAL ATTACHMENT - AT LLER OR HEAD - SWING OR - AT PIVOT '-0"='-0" '-0"='-0".0

6 /8" /" /8" /" " /" " /8" /" /8" /" MONOLITHIC, TEMPERED /8" GLASS) /" MONOLITHIC, TEMPERED /8" GLASS) CRL BOTTOM PIVOT ESPL0CKSD - EU PFILE CYLINDER LOCK CRL STAINLESS STEEL SHIM OR SILL - SWING OR - AT PIVOT OR SILL - SLIDING PANEL - AT SLIDE LOCK '-0"='-0" '-0"='-0".0

7 /8" /6" /8" /" MONOLITHIC, TEMPERED FOR /8" GLASS) ESPCYLKK - EU PFILE CYLINDER LOCK /" MONOLITHIC, TEMPERED FOR /8" GLASS) ESPFL00RL0CK - SLIDE LOCK /8" /" MONOLITHIC, TEMPERED FOR /8" GLASS) ESPRECV - ESPL0CK - /" MONOLITHIC, TEMPERED FOR /8" GLASS) /" /" /" /" /" /" /" /" CRL OR RAIL END CAP ESPSDTPV0T - BOTTOM PIVOT CRL OR RAIL, SEE SHEETS.0 &.0 FOR AVAILABLE SIZES AND FINISHES /8" /8" " /" OR JAMB - AT PIVOT SLIDING PANELS - AT EU PFILE CYLINDER & '-0"='-0" '-0"='-0" /8" /" /8" /8" CRL OR RAIL END CAP ESPFL00RL0CK - SLIDE LOCK CRL OR RAIL, SEE SHEETS.0 &.0 FOR AVAILABLE SIZES AND FINISHES /8" /8" OR JAMB - AT PIVOT SLIDING PANELS - AT & '-0"='-0" '-0"='-0".0