Owner s Manual. FT100X. 4ft Folding Football Table. Manual version 2.1

Transcription

1 Owner s Manual. FT100X 4ft Folding Football Table Manual version 2.1

2 Congratulations on purchasing your very own FT100X Folding Football Table You have chosen a high-quality, safe and innovative product, and we are certain it will keep you entertained for hours. Please take the time to read this owner s manual as it will help you to get the most out of your new product. For more information, or if you require any assistance please us at support@viavito.com Manual Contents. Safety Information 03 Assembly 04/14 Contents Checklist 04 Assembly Instructions 05/11 Folding & Storage Instructions 12/14 Customer Support 15/16 Contact Information 15 Manufacturer s Warranty 16 Technical Information 17/19 Parts List 17/18 Exploded Diagram

3 Safety Information. Please read all instructions carefully before using this product. Retain this manual for future reference. The specifications of this product may vary slightly from the illustrations and are subject to change without notice. IMPORTANT SAFETY NOTICE: note the following precautions before using the product. 01 Assemble the product exactly as per the instructions in this manual. 02 Check all the screws, nuts and other connections before using the table for the first time and ensure that it has been built correctly and is safe to be used. 03 Set up the table in a dry, level place and keep it away from moisture and water. 04 DO NOT use cleaning products such as detergents. To clean the table only use a clean cloth. 05 This product is for home use only. If used outside, it must be stored indoors after use. If you don t like instruction manuals, then check out our step-by-step assembly video here:

4 Assembly. Contents Checklist Make sure you have the following parts: #1 #2 #3 #4 #5 5/16''handle bolt 4 pcs 5/16''X1-1/2'' bolt 1/4''X1-1/2'' bolt 3/16''*1-3/4'' bolt #6 #7 #8 #9 #10 5/16'' washer 6 pcs 1/4'' washer 3/16'' washer T3.5X*1-3/4 round nut head screw 4 pcs #11 #12 #13 #14 #15 F3.5X*1-1/2'' flat head screw 4 pcs T3.5X*1 round head screw T3.5X*5/8 round head screw 4 pcs cross bar tool slide scorer #16 #17 #18 #19 #20 1 home players rod 3 home players rod 4 home players rod 1 away players rod #21 #22 #23 #24 #25 3 away players rod 4 away players rod side panel end panel playing field #26 #27 #28 #29 #30 playing field support brace leg A/B leg A/B leg panel A leg panel B #31 #32 #33 #34 #35 rod handle 2 PCS ball 04

5 Assembly Instructions Step One. 01 Slide the playing field (#24) into the grooves on the two side panels (#22). #22 #24 side panel playing field #22 #24 #22 Please feel free to check out our step-by-step assembly video here:

6 Step Two. 01 Loosely attach one end panel (#23) to the two side panels using 4 bolts (#3) and 4 washers (#6). 02 Make sure the playing field is slotted into the grooves on both of the side panels. 03 Now loosely attach the other end panel to the two side panels using the bolts (#3) and washers (#6). 04 Tighten all the bolts using the supplied Allen key #3 #6 #23 1/4''X1-1/2'' bolt 1/4'' washer end panel #24 #22 #6 #3 #23 #6 #3 06

7 Step Three. 01 Centre the playing field by pulling it gently towards one end until your fingers meet the edge of the piece of wood underneath. 02 Push the support braces (#25) down, noting that they do not sit flat against the playing field, and align them with the holes on each side as shown in the diagram. Fix them in place from the outside of the table using the screws (#6). 03 Place the goals (#34) so they sit against the end panel and the playing field, aligning them between the two screw holes on the playing field. Fix the goals in position using the screws (#12). 04 Fix the playing field in place using 4 screws (#11) for each end in the predrilled holes. #25 #9 #11 #12 #34 playing field support T3.5X*1-3/4 round brace head screw 4 pcs 4 pcs 2 PCS #25 #11 #34 #12 #9 07

8 Step Four. 01 Loosely attach the two straight legs (#27A/B) to the side panels using the handle bolts (#1) and washers (#5). 02 Attach leg panel A (#28), which is the larger of the two leg panels, to the two legs using the bolts (#4), the washers (#7) and the Allen Key. The logo on the panel should face outwards and be upside down at this stage so it is the right way up once the table is upright. Then tighten the handle bolts to secure the legs in place. 03 Loosely attach the other two legs (#26A/B) to the side panels with the feet pointing outwards, using the handle bolts (#1) and washers (#5). 04 Attach leg panel B (#29) between the vertical parts of the legs using the bolts (#4), the washers (#7) and the Allen Key, again with the logo facing outwards and upside down. 05 Fix the cross bar (#13) between the horizontal part of the feet using the bolts (#2), the washers (#5) and the Allen Key. Then tighten the handle bolts to secure the legs in place. #1 #2 #4 #5 #7 #8 5/16''handle bolt 4 pcs #13 5/16''X1-1/2'' bolt #26 3/16''*1-3/4'' bolt #27 5/16'' washer 6 pcs 3/16'' washer #28 #29 nut cross bar leg A/B leg A/B leg panel A leg panel B #26A #13 #27A #8 #29 #26B #2 #8 #5 #27B #28 #7 #4 #7 #4 #5 #1 08

9 CAUTION! 1: It is recommended that two adults turn the table over. 2: Take hold of the table as shown. 3: Turn the table over. 4: Place the table on all four feet at the same time. Take hold of the table. DO NOT hold the table by the legs. DO NOT lean the table on its legs. 09

10 Step Five. 01 Each side has 4 player rods to be set in a formation. The correct layout starting at either end is 1 home player, 3 home players, 3 away players, 4 home players, 4 away players, 3 home players, 3 away players, 1 away player. 02 Insert the player rod into the corresponding hole with a plastic loop in the side panel. Insert it from the inside through the hole ensuring the players face forward. Then take a metal rod, inserting it through the outside of the matching hole on the other side panel, with the flat end which has a hole in it on the outside of the table. Slide a foam circle and then a plastic washer onto the inner end of the metal rod and then thread it into the player rod. Leave it resting as it is and repeat this process for all player rods for both teams. 03 To fix the rods in place, take the metal rod out of the hole and bring it into the table. Place the rod bushing (#33) onto the metal rod, aligning it with the flat end, and then fix it in place with the other bushing with the pin (#32). Push the rod back into the hole in the side panel and screw in the square head bushing (#31). Repeat this process for all the rods. #16 #17 #18 #19 #20 1 home players rod 3 home players rod 4 home players rod #21 #31 #32 #33 1 away players rod 3 away players rod 4 away players rod #31 #22 #32 #33 #33 #22 #

11 Step Six. 01 Push a rod handle grip (#30) onto the end of each rod. 02 Screw the slide scorers (#15) into the predrilled holes above each goal using the screws (#10). #10 #15 #30 F 3.5X*1-1/2 flat head screw 4 pcs slide scorer rod handle #18 #17 #16 #15 #10 #30 Hole #17 #21 #20 #19 #20 Please feel free to check out our step-by-step assembly video here:

12 Folding & Storage Instructions Step One. 01 Remove the bolt (#1) from each leg as per the diagram below. There are 4 in total to remove. 12

13 Step Two. 01 Supporting the table on each side, carefully lift it up into the vertical position. 13

14 Step Three. 01 Once the table is in the vertical position, fold the top legs down into the body of the table. Then secure the table by reinserting the 4 bolts (#1) through the sides and legs. 14

15 Customer Support. Contact Information Should you require any assistance regarding this product please gather the following information and then contact us using the details below: Original purchase date Place of purchase Information about the place and conditions of use Precise description of the issue or defect. The best way to contact us is via the website: Viavito Ltd Sabichi House 5 Wadsworth Road Perivale, Middlesex UB6 7JD support@viavito.com IMPORTANT!! - Please retain your sales receipt. Viavito Customer Care may request proof of purchase to validate eligibility for warranty service. Warranty cover starts from the date shown on the proof of purchase

16 Manufacturer's Warranty Viavito ltd warrants this product to be free of defects of material and workmanship, under normal use and conditions, for a period of 6 months from the date of the original purchase. Terms. This warranty extends only to the original purchaser and is not transferable. The warranty does not cover: 01 Normal wear and tear 02 Any changes to upgrade this product from its normal state or use other than as described in the user manual 03 Damage resulting from: a) Transport b) Abuse, misuse, failure to follow instructions or improper or abnormal use c) Non-home use - including commercial, professional, or rental purposes d) Repairs not provided by Viavito ltd e) Accidents, lightning, water, fire, or any other causes beyond the control of Viavito f) Improper location including, but not limited to, humid, dusty, or outdoor environments. Viavito is not responsible or liable for direct, indirect, or consequential losses arising out of or in connection with the use of this product or damages with respect to any loss of property, revenue, profits, enjoyment or use, nor for any costs of removal or installation of this product. This warranty covers products purchased as new inside the United Kingdom. This warranty is in addition does not in any way affect your statutory rights. 16

17 Technical Information. Parts List No. DESCRIPTION Q TY #1 Handle Bolt 4 PCS #2 Bolt 2 PCS #3 Bolt 8 PCS #4 Bolt 8 PCS #5 Washer 8 PCS #6 Washer 8 PCS #7 Washer 8 PCS #8 Nut 8 PCS #9 Round Head Screw 4 PCS #10 Flat Head Screw 4 PCS #11 Round Head Screw 8 PCS #12 Round Head Screw 4 PCS #13 Cross Bar 1 PCS #14 Tool 1 PCS #15 Slide Scorer 2 SET #16 Home Players Rod 1 PCS #17 Home Players Rod 2 PCS #18 Home Players Rod 1 PCS #19 Away Players Rod 1 PCS #20 Away Players Rod 2 PCS #21 Away Players Rod 1 PCS #22 Side Panel 2 PCS #23 End Panel 2 PCS #24 Playing Field 1 PCS #25 Playing Field Support Brace 2 PCS #26 Leg A/B 2 PCS #27 Leg A/B 2 PCS #28 Leg Panel A 1 PCS 17

18 No. DESCRIPTION Q TY #29 Leg Panel B 1 PCS #30 Rod Handle 8 PCS #31 Rod Bushing 8 PCS #32 Rod Bushing 8 PCS #33 Rod Bushing 8 PCS #34 Goal 2 PCS #35 Ball 2 PCS 18

19 Exploded Diagram 19