ALUMA-VENT AWNING REGULAR END STYLE INSTALLATION INSTRUCTIONS

Size: px
Start display at page:

Download "ALUMA-VENT AWNING REGULAR END STYLE INSTALLATION INSTRUCTIONS"

Transcription

1 ALUMA-VENT AWNING REGULAR END STYLE INSTALLATION INSTRUCTIONS Contact us at: or Options in your kit: A. Splice Pg 16 B. Column Pg 17 C. C-Channel Brace Pg 19 D. Runner Brace Pg 21 E. Kicker Brace Pg 23 F. Extended Ends Pg 24 G. Flat Ends Pg 25 Before You Begin: Consult your local building department for any required permits You may be required to obtain a building permit for this structure. Contact your local building department for details. Read instructions thoroughly Please read all instructions and notes carefully prior to assembly. Americana is not responsible for replacing parts lost or damaged due to incorrect assembly. A solid attachment is required for all existing structures All points of attachment to existing structures (such as house, deck, or patio) must be into solid, structurally sound, and secure material. Example: wood or metal studs, joists, headers, plates, or sills. Attachment may be made to block, concrete, brick, or stone veneer with suitable anchors, purchased separately. Note: Failure to properly fasten unit to wall, deck, porch, or patio may result in damage to the unit, damage to the structure it is attached to, and could cause serious bodily injury. Check for all parts Use the Parts and Hardware List to check for any missing parts. To prevent scratching of painted materials, place on a tarp or other protective material. Assistance may be required during certain steps of assembly. CAUTION Proper site preparation is required. Standard shade structure design does not include additional loads such as hanging heavy plants, swings, or other objects. DO NOT stand or sit on the shade structure roof. Repair or replace broken parts immediately. This kit contains parts with metal edges. Please be careful when handling. Americana Building Products. 1 10/29/2013

2 Tools Needed for Installation Safety Glasses Socket / Hex Head Driver Sizes: 1/4, 11/32, 3/8 Drill Bit Sizes: 1/8, 5/16 Tape Measure Electric Drill Screw Driver Flat & Phillips Carpenters Level Ladder Other Required Tools: Gloves, Chalk Line, Silicone Caulking Recommended Tools: Rubber Mallet, Carpenters Square, Pliers, Tin Snips Required Parts Not Included In Kit: Appropriate anchors or lag screws to attach awning to your home s exterior finish, 3/16 diameter. Installation Notes and Tips Complete site preparation before beginning assembly. DO NOT attempt to assemble on a day with strong winds. Have assistance nearby to lift and secure parts in place. It is recommended to lower the speed of electric drills during this installation. Installing Tek screws at a high RPM may cause the Tek screws to become damaged or break during installation. Avoid over-driving, under-driving, or driving at an angle to properly install fasteners. Over-driven fasteners can depress the material and allow water to collect around the fastener, which will corrode the surface finish. Under-driven fasteners can cause leaks and may back out over time. CORRECT TOO LOOSE TOO TIGHT We strongly recommend using a high grade sealant, such as our 100% silicone caulk and sealant. Caulking should be applied uniformly and without skips. A poor caulking job can cause leaks. Note: These are basic installation guidelines for our standard load units and may not be suitable to your specific installation. It is important to follow all local and national building codes when installing any exterior improvement product. If you have questions regarding the proper installation of any Americana product, please call us toll free at and ask for assistance. Americana Building Products. 2 10/29/2013

3 NOTE: Length and quantity of parts will vary based on the size of the awning. Parts List A Rafter Part Code: B Sawtooth Part Code: C Runner Part Code: D Apron Bar Part Code: E Flashing Part Code: F Clip Part Code: G Wall Bracket Part Code: H Louvers Part Code: I Bottom Pan Part Code: J Top Pan Part Code: K End Pan (RH Shown) Part Code: Americana Building Products. 3 Aluma-Vent Installation Guide

4 Screws shown actual size. Hardware List AA #8 x 3/4 Screw Part Code: BB #8 x 1/2 Bolt Part Code: CC #8 Hex Nut Part Code: DD #14 x 3/4 Screw Part Code: NOTE: Length and quantity of parts will vary based on the size of the awning. Optional Coordinating Parts and Hardware L Flashing Splice Part Code: M Runner Splice Part Code: N C-Channel Brace Part Code: O C-Channel Wall Bracket Part Code: P Upper Column Bracket Q Column Mounting Bracket Part Code: EE 1/4 x 2-1/2 Bolt Part Code: S Kicker Brace Part Code: 6081X (varies by length) R Column Part Code: FF 1/4 x 3/4 Bolt Part Code: GG 1/4 Square Nut Part Code: HH 1/4 Flat Washer Part Code: II 1/4 x 1-3/4 Tapcon Anchor Part Code: Americana Building Products. 4 Aluma-Vent Installation Guide

5 STEP 1 In some cases, rafter (A) and sawtooth (B) are not pre-assembled. If this happens, position rafter (A) so the curl rests on top of sawtooth (B) and the front ends are flush. Attach using a #8 x 3/4 screw (AA) through the pre-drilled hole in sawtooth (B). 1A FRONT VIEW Open the right-hand rafter (A) and sawtooth (B) assembly to approximately the desired slope of the awning. 1B Americana Building Products. 5 Aluma-Vent Installation Guide

6 STEP 2 Attach wall bracket (G) to sawtooth (B) using (2) #8 x 3/4 screws (AA) through the pre-drilled holes. DO NOT completely tighten screws at this time. 2 NOTE: If you ordered the optional flat style louver ends, see Optional Sheet G. STEP 3 Select the right-hand set of louvers (H). Lay each one on a flat surface and make a horizontal bend even with the notch at the top end. Bend at approximately a 90 degree angle. 3 Americana Building Products. 6 Aluma-Vent Installation Guide

7 STEP 4 Insert the curl of the shortest louver (H) into the curled channel of rafter (A) over the first tab from the front on sawtooth (B). Align the holes in louver (H) with the holes in sawtooth (B) by raising or lowering rafter (A). If necessary, also change the bend on louver (H). Attach using (2) #8 x 3/4 screws (AA). 4 TIP: Install screw (AA) in the back hole of louver (H) first, then use the leverage of sawtooth (B) and rafter (A) to align the front hole. FRONT VIEW STEP 5 Repeat step 4 to complete the right end louver assembly, beginning with the longest louver (H) and working down. On awnings with extended ends, begin with the louver closest to the back end of rafter (A). Sawtooth (B) will have extra tabs for the extension louvers. Be sure not to attach the last louver to an extension tab. 5 NOTE: If you ordered extended louver ends, see Optional Sheet F. Americana Building Products. 7 Aluma-Vent Installation Guide

8 STEP 6 Select the right-hand end pan (K) by checking the sticker at the top of the pan. Attach to the right-hand louver (H) assembly using #8 x 3/4 screws (AA). Line up the pre-drilled holes in end pan (K) with the pre-drilled holes in rafter (A). 6 Look for sticker at top of pan. STEP 7 Bend the valance of end pan (K) and attach to louver (H) using #8 x 3/4 screws (AA) through the pre-drilled holes. This completes the right-hand end assembly. Repeat steps 1-7 to complete the left-hand end assembly. 7 Americana Building Products. 8 Aluma-Vent Installation Guide

9 STEP 8 Attach runners (C) to the left- and right-hand end assemblies using #14 x 3/4 screws (DD) through the pre-drilled holes in rafter (A). 8 STEP 9 Select flashing (E) and attach to end pans (K) using #8 x 1/2 bolt (BB) and #8 hex nut (CC) through the pre-drilled holes. 9 Americana Building Products. 9 Aluma-Vent Installation Guide

10 STEP 10 At this point, the awning may be lifted up and attached to the mounting surface. Anchors are not supplied with this kit. 3/16 diameter anchors suitable for your mounting surface are required. 10 NOTE: Awning must be attached to a solid structural support. DO NOT attach awning to sheathing, siding, flashing, or any other non-structural surface. While using a level to keep flashing (E) plumb, attach to the mounting surface through the pre-drilled holes. Pre-drill a pilot hole into the mounting surface using a 1/8 drill bit before attaching anchors. STEP 11 With only the top of the awning attached to the mounting surface, use a level to plumb sawtooth (B) and louvers (H). Looking at the side of the awning, the louvers should be parallel to the mounting surface. Looking at the front of the awning, the louvers should appear straight up and down. 11 With the awning properly aligned, attach mounting bracket (G) to the mounting surface using 3/16 diameter anchor, purchased separately. Then be sure to tighten the #8 x 3/4 screws (AA) attached to mounting bracket (G). Pre-drill a pilot hole into the mounting surface using a 1/8 drill bit before attaching anchors. TIP: Align and attach one end of the awning before moving to the other side to avoid either side falling out of alignment. Once the awning is attached, if you need to move runner (C) to avoid an out-swinging door or window, remove #14 x 3/4 screws (DD), re-position the runner, then re-attach screws. Americana Building Products. 10 Aluma-Vent Installation Guide

11 STEP 12 Select the bottom pans (I). Lay each one on a flat surface and make a horizontal bend even with the notch at the bottom end. Bend to approximately a 90 degree angle. 12 STEP 13 Attach bottom pans (I) to flashing (E) using #8 x 1/2 bolt (BB) and #8 hex nut (CC). 13 Americana Building Products. 11 Aluma-Vent Installation Guide

12 STEP 14 Select apron bar (D). Using a flat head screw driver, pry up each hook so there is approximately 1/8 gap. This will make it easier to attach top pan (J) in later steps. 14 STEP 15 Position apron bar (D) behind end pans (K) and bottom pans (I). Fit the hooks of apron bar (D) through the rectangular holes of the pans. Bend the valance of bottom pans (I) forward as necessary. Attach apron bar (D) to end pans (K) using #8 x 3/4 screw (AA) next to the rectangular holes. 15 NOTE: Apron bar hook MUST fit through each hole for proper alignment of pans. Americana Building Products. 12 Aluma-Vent Installation Guide

13 STEP 16 Attach clip (F) to runner (C) between two pans. Hook clip (F) over one side of runner (C), being sure the retainers are over the lip of both pans. Compress the top of runner (C) until you can snap clip (F) over the other side. 16 Start from both ends and alternate, working towards the center of the awning. Install all clips (F) on the lower runner (C) before installing on the upper runner. If necessary, lightly tap bottom pan (I) to keep the hooks of apron bar (D) inside the rectangular holes. This MUST be done to maintain proper spacing of the pans. 2 1 STEP 17 SIDE VIEW Hook one side of top pan (J) over the large cover locks of clips (F). Press down on the other side to snap the locks together. 17 FRONT VIEW Americana Building Products. 13 Aluma-Vent Installation Guide

14 STEP 18 Bend the valance of top pan (J) and snap to the hooks on apron bar (D). Repeat steps for all remaining top pans (J). 18 BOTTOM VIEW Once all top pans (J) are installed, apply a continuous bead of caulk along the top of flashing (E). Caulking should be applied uniformly and without skips. A poor caulking job can cause leaks. Assembly Completed Other Products Available From Americana: Fabric & Aluminum Awnings - Carports - Patio Covers - Pergolas - Room Enclosures - Park Shelters Americana Building Products. 14 Aluma-Vent Installation Guide

15 Care and Maintenance Every 12 months your shade structure should be inspected and maintained by: Tightening loose nuts and bolts at all connections. Repairing damage to the finish to prevent corrosion. Replacing lost or damaged fasteners, brackets, and other parts. Replacing brittle or cracked sealer to prevent leaks. Removing obstructions and miscellaneous build-up from gutters, eaves, and downspouts. Warranty What the Warranty Covers: Americana Building Products (Americana) warrants its products that have been installed in accordance with the installation guidelines, under normal usage conditions, and with proper maintenance as follows: Ten (10) year warranty against peeling, cracking, blistering, or crazing of the surface finish of aluminum components. One (1) year warranty against defects in materials and workmanship. Period of Coverage: The warranty period begins on the date of original shipment. What Americana Will Do To Correct Problems: If defects or damage of the kind mentioned above should occur within the warranty period, Americana will replace the defective parts only; FOB its plant at Salem, Illinois, upon receiving the written and documented claim of purchaser. What the Warranty Excludes: Because of normal aging and weathering of materials, it may not be possible to perfectly match the colors of original parts and replacement parts. Americana will not provide or pay for the installation of such replacement parts. Americana shall not be responsible for weather related failures, damages due to faulty installation, misuse or abuse of the product, or for consequential damages, including personal injuries or property damages. There are no warranties, express or implied, which extend beyond the description on the face hereof. How Do You Get Service: If you believe that you have a claim under this warranty, submit a copy of your original receipt or other reasonable evidence of the date of purchase, the identity of the product, and photos and a description of the allegedly defective product to the address below. Please also include your name, address, and phone number so that a customer service representative can respond to your submission. Ultimate determination of the existence and extent of any claimed defect under this warranty shall be made by Americana in its sole discretion. Submit Claims To: Americana Building Products, Inc Warranty Claim, P.O. Box 1290, Salem, IL, Americana Building Products. 15 9/28/2012

16 OPTIONAL SPLICE ASSEMBLY Longer awnings may require certain parts to be sent in more than one piece. If this happens, follow the steps below to splice the parts before beginning assembly. STEP A1 To splice flashing (E), first apply an ample amount of caulk to the back of the provided splice (L). Position the splice equally inside two pieces of flashing and attach using (4) #8 x 3/4 screws (AA). A1 SIDE VIEW STEP A2 To splice runner (C), position the provided splice (M) equally inside two pieces of runner. Attach using (12) #8 x 3/4 screws (AA) as shown. A2 SIDE VIEW Americana Building Products. Optional Sheet A - Page 16 Aluma-Vent Installation Guide

17 OPTIONAL COLUMN INSTALLATION Complete these steps after Step 11 of the standard instructions. STEP B1 Measure the distance from the bottom of the front runner (C) to the top of the mounting surface. Trim column (R) to the required length. NOTE: When measuring for column height, take into account the added height of brackets (P) and (Q). The brackets will add approximately 3/8 to the overall column height when installed. B1 STEP B2 Insert upper column bracket (P) and (2) column mounting brackets (Q) in the legs of column (R), tapping with a rubber mallet if necessary. Attach the brackets using #8 x 3/4 screws (AA). B2 Americana Building Products. Optional Sheet B - Page 17 Aluma-Vent Installation Guide

18 STEP B3 Position column (R) under the front runner (C). While using a level to keep the column plumb, attach upper column bracket (P) to the runner using (2) #14 x 3/4 screws (DD). B3 STEP B4 While using a level to keep column (R) plumb, attach each column mounting bracket (Q) to the mounting surface using (2) 1/4 x 1-3/4 Tapcon concrete anchors (II) per bracket. Pre-drill a pilot hole into the mounting surface using a 1/8 drill bit. NOTE: If attaching to wood or composite deck, appropriate lag screws are required, purchased separately. DO NOT use Tapcon anchors to attach to wood or composite surface. B4 Americana Building Products. Optional Sheet B - Page 18 Aluma-Vent Installation Guide

19 OPTIONAL C-CHANNEL BRACE INSTALLATION C-channel braces are required on awnings with a projection greater than 78. A column or post is required to install a C-channel brace. Complete these steps after column installation. STEP C1 Position C-channel brace (N) against the bottom of runners (C) and the side of column (R). The back end of the brace should reach the mounting surface. Attach C-channel brace (N) to each runner (C) using #14 x 3/4 screws (DD). C1 FRONT VIEW STEP C2 Using a 5/16 drill bit, drill (2) holes through C-channel brace (N) and one leg of column (R) approximately 2 apart centered in the C-channel brace. Attach the brace to the column using (2) 1/4 x 2-1/2 bolts (EE), 1/4 flat washers (HH), and 1/4 square nuts (GG). C2 SIDE VIEW Americana Building Products. Optional Sheet C - Page 19 Aluma-Vent Installation Guide

20 STEP C3 Mark (2) holes approximately 1-1/2 apart centered one side of C-channel bracket (O). Drill the holes using a 5/16 drill bit. Position the C-channel bracket (O) against the mounting surface and C-channel brace (N). Mark and drill the same hole pattern through the side of C-channel brace (N). Attach the bracket to the brace using (2) 1/4 x 3/4 bolts (FF) and 1/4 square nuts (GG). C3 Depending on the drop of your awning, the brace may be cut at the wall to the proper angle. OPTIONAL FIELD CUT STEP C4 Attach C-channel bracket (O) to the mounting surface using (2) 1/4 diameter anchors suitable for your mounting surface. Pre-drill a pilot hole into the mounting surface using a 1/8 drill bit. NOTE: Awning must be attached to a solid structural support. DO NOT attach awning to sheathing, siding, flashing, or any other non-structural surface. C4 Americana Building Products. Optional Sheet C - Page 20 Aluma-Vent Installation Guide

21 OPTIONAL RUNNER BRACE INSTALLATION If you received any additional braces, follow the steps below after Step 11 of the standard instructions. Awnings with a projection between require the runner brace. STEP D1 A runner brace consists of two extra pieces of runner (C). Typically, one piece is longer than the other. Position the longer piece of the runner brace against the bottom of runners (C). The back end of the brace should reach the mounting surface. Attach the brace to each runner (C) using #8 x 3/4 screws (AA). D1 STEP D2 Position wall bracket (G) against the brace and the mounting surface. Attach the bracket to the brace using (2) #8 x 3/4 screws (AA). Attach mounting bracket (G) to the mounting surface using 3/16 diameter anchor, purchased separately. Pre-drill a pilot hole into the mounting surface using a 1/8 drill bit. NOTE: Awning must be attached to a solid structural support. DO NOT attach awning to sheathing, siding, flashing, or any other non-structural surface. D2 Americana Building Products. Optional Sheet D - Page 21 Aluma-Vent Installation Guide

22 STEP D3 Position the remaining piece of runner brace (C) over the other, going back horizontally to the mounting surface. Attach the two pieces of runner brace (C) using (2) #8 x 3/4 screws (AA). D3 STEP D4 Position wall bracket (G) against the brace and the mounting surface. Attach the bracket to the brace using (2) #8 x 3/4 screws (AA). Attach mounting bracket (G) to the mounting surface using 3/16 diameter anchor, purchased separately. Pre-drill a pilot hole into the mounting surface using a 1/8 drill bit. NOTE: Awning must be attached to a solid structural support. DO NOT attach awning to sheathing, siding, flashing, or any other nonstructural surface. D4 Americana Building Products. Optional Sheet D - Page 22 Aluma-Vent Installation Guide

23 OPTIONAL KICKER BRACE INSTALLATION If you received any additional braces, follow the steps below after Step 11 of the standard instructions. Awnings with a projection between require the kicker brace. STEP E1 Position kicker brace (S) so the flat, formed end is against the bottom of runner (C) and the pre-attached bracket reaches the mounting surface. Attach kicker brace (S) to runner (C) using #8 x 3/4 screw (AA). E1 SIDE VIEW STEP E2 Attach kicker brace (S) bracket to the mounting surface using 3/16 diameter anchor, purchased separately. Pre-drill a pilot hole into the mounting surface using a 1/8 drill bit. NOTE: Awning must be attached to a solid structural support. DO NOT attach awning to sheathing, siding, flashing, or any other non-structural surface. E2 Americana Building Products. Optional Sheet E - Page 23 Aluma-Vent Installation Guide

24 OPTIONAL EXTENDED ENDS ASSEMBLY When mounting an awning to an overhang, sawtooth (B) will be furnished with extra tabs and extra louvers (H) will be provided. Attach sawtooth (B) to the mounting surface as shown in Step 11 of the standard instructions, then complete the steps below. STEP F1 Measure the distance from the center of the holes in the tabs of sawtooth (B) to the bottom of the overhang. Add 1 to this measurement and cut the extension louvers (H) to the required height, measuring from the center of the holes. F1 STEP F2 Lay the extension louvers (H) on a flat surface and bend a 1 tab at the top. Attach extension louvers (H) to sawtooth (B) using (2) #8 x 3/4 screws (AA), as done in Steps 4-5 of the standard instructions. Attach the 1 tab to the overhang using appropriate lag screw or anchor. F2 Repeat steps for all extension louvers. Americana Building Products. Optional Sheet F - Page 24 Aluma-Vent Installation Guide

25 OPTIONAL FLAT ENDS ASSEMBLY If you ordered the optional flat style louver ends, complete the steps below after Step 2 of the standard instructions. Sawtooth (B) will not have the tabs as shown in the Parts List. STEP G1 Insert the curl of the shortest louver (H) into the curled channel of rafter (A) over the first set of holes from the front of sawtooth (B). Align the holes in louver (H) with the holes in sawtooth (B) by raising or lowering rafter (A). Attach using (2) #8 x 3/4 screws (AA). G1 TIP: Install screw (AA) in the back hole of louver (H) first, then use the leverage of sawtooth (B) and rafter (A) to align the front hole. SAWTOOTH FRONT VIEW STEP G2 Repeat step G1 to complete the right end louver assembly, beginning with the longest louver (H) and working down. G2 Repeat steps G1 and G2 to complete the left end louver assembly. Continue with Step 6 of the standard instructions. Americana Building Products. Optional Sheet G - Page 25 Aluma-Vent Installation Guide

YUKON PATIO COVER INSTALLATION INSTRUCTIONS

YUKON PATIO COVER INSTALLATION INSTRUCTIONS YUKON PATIO COVER INSTALLATION INSTRUCTIONS Before You Begin: Consult your local building department for any required permits You may be required to obtain a building permit for this structure. Contact

More information

ALUMA VENT AWNING REGULAR END STYLE ASSEMBLY INSTRUCTIONS

ALUMA VENT AWNING REGULAR END STYLE ASSEMBLY INSTRUCTIONS Contact us @ (800)851-0865 ALUMA VENT AWNING REGULAR END STYLE ASSEMBLY INSTRUCTIONS Recomended Tools: Elec. Drill or Battery Powered Screw Driver 1/4" Socket Phillips Screw Driver Pliers Plus: The correct

More information

ALUMA VENT AWNING WITH VALANCE END ASSEMBLY INSTRUCTIONS

ALUMA VENT AWNING WITH VALANCE END ASSEMBLY INSTRUCTIONS Contact us @ (800)851-0865 ALUMA VENT AWNING WITH VALANCE END ASSEMBLY INSTRUCTIONS Recomended Tools: Drill or Elec. Screw-driver 1/4" Socket Phillips Screw Driver Pliers Plus: The correct screws/anchors

More information

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS FOR AZTEC SHELTER

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS FOR AZTEC SHELTER IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS FOR AZTEC SHELTER ** READ ALL INSTALLATION INSTRUCTIONS BEFORE STARTING!** If at any point, you have questions, call 1-800-851-0865...(The manufacturer will

More information

LAS VEGAS PATIO COVER INSTALLATION INTSRUCTIONS

LAS VEGAS PATIO COVER INSTALLATION INTSRUCTIONS STEP 8. Drill 2-5/8" dia. holes in the outer face of the ledger board spaced evenly (approximently 24" O.C.). Hoist the ledger board into place, centering it in front of the gutter. Anchor the inner face

More information

ATTACHED PERGOLA ARBOR INSTALLATION INSTRUCTIONS

ATTACHED PERGOLA ARBOR INSTALLATION INSTRUCTIONS ATTACHED PERGOLA ARBOR INSTALLATION INSTRUCTIONS Recommended Tools: Before You Begin: Saftey Glasses, Tape Measure, Carpenters Level, Framing Square, Hex Head Nut Drivers, Chalk Line Elec. Drill w/ Bits

More information

4-SIDED NAVAJO SHELTER ARIZONA MODEL INSTALLATION INSTRUCTIONS

4-SIDED NAVAJO SHELTER ARIZONA MODEL INSTALLATION INSTRUCTIONS 4-SIDED NAVAJO SHELTER ARIZONA MODEL INSTALLATION INSTRUCTIONS Recommended Tools: Before You Begin: Saftey Glasses, Tape Measure, Carpenters Level, Framing Square, Hex Head Nut Drivers, Chalk Line, Elec.

More information

OZARK DOOR CANOPY ASSEMBLY INSTRUCTIONS

OZARK DOOR CANOPY ASSEMBLY INSTRUCTIONS OZARK DOOR CANOPY ASSEMBLY INSTRUCTIONS Recommended Tools: Level, Pliers, 3/8" Electric Drill, Carpenters Square, Tape Measure, Metal Hack Saw, Silicone Caulking, Screw Drivers (Regular & Phillips) Before

More information

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS ** READ ALL INSTALLATION INSTRUCTIONS BEFORE STARTING!** If at any point, you have questions, call 1-800-851-0865...(The manufacturer will not be responsible

More information

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS ** READ ALL INSTALLATION INSTRUCTIONS BEFORE STARTING!** If at any point, you have questions, call 1-800-851-0865...(The manufacturer will not be responsible

More information

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS ** READ ALL INSTALLATION INSTRUCTIONS BEFORE STARTING!** If at any point, you have questions, call 1-800-851-0865...(The manufacturer will not be responsible

More information

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS

IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS ** READ ALL INSTALLATION INSTRUCTIONS BEFORE STARTING!** If at any point, you have questions, call 1-800-851-0865...(The manufacturer will not be responsible

More information

Dura-Lock Roof System

Dura-Lock Roof System DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.

More information

ATTACHED SINGLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS

ATTACHED SINGLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS ATTACHED SINGLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS Before You Begin: Recommended Tools: Note on Masonry Units: Note on Electric Drills: Note on Cutting and Drilling: 1) Please read all instructions and

More information

Installation Guidelines

Installation Guidelines Page 1 Tools You ll Need 4 ft. Carpenter s level Chalk line (to mark U channel locations) Cordless drill/nut driver Caulking gun Chop saw with a metal cutting blade on it (required to make accurate and

More information

ATTACHED DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS

ATTACHED DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS ATTACHED DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS Before You Begin: Recommended Tools: Note on Masonry Units: Note on Electric Drills: Note on Cutting and Drilling: 1) Please read all instructions and

More information

AWNING / PATIO COVER INSTALLATION INSTRUCTIONS

AWNING / PATIO COVER INSTALLATION INSTRUCTIONS AWNING / PATIO COVER INSTALLATION INSTRUCTIONS Before You Begin Read the installation instructions thoroughly before beginning the installation procedure. Perspective In the Awning Instructions, Back means

More information

FREESTANDING DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS

FREESTANDING DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS FREESTANDING DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS Before You Begin: Recommended Tools: Note on Masonry Units: Note on Electric Drills: Note on Cutting and Drilling: 1) Please read all instructions

More information

Level, Pliers, 3/8" Electric Drill, Carpenters Square, Tape Measure, Metal Hack Saw, Silicone Caulking, Screw Drivers (Regular & Phillips)

Level, Pliers, 3/8 Electric Drill, Carpenters Square, Tape Measure, Metal Hack Saw, Silicone Caulking, Screw Drivers (Regular & Phillips) Delta Door Canopy Installation Instructions Recommended Tools: Before You Begin: Level, Pliers, 3/8" Electric Drill, Carpenters Square, Tape Measure, Metal Hack Saw, Silicone Caulking, Screw Drivers (Regular

More information

Installation Guidelines

Installation Guidelines Page 1 Tools You ll Need 4 ft. Carpenter s level Chalk line (to mark U channel locations) Cordless drill/nut driver Caulking gun Chop saw with a metal cutting blade on it (required to make accurate and

More information

THANK YOU FOR PURCHASING FROM HERITAGE PATIOS

THANK YOU FOR PURCHASING FROM HERITAGE PATIOS Installation Guide THANK YOU FOR PURCHASING FROM HERITAGE PATIOS Your purchase is engineered by nearly a half century of commercial and residential product design proudly manufactured in the USA from responsibly

More information

Recommended Tools: Before You Begin:

Recommended Tools: Before You Begin: Recommended Tools: Before You Begin: Saftey Glasses, Tape Measure, Carpenters Level, Framing Square, Hex Head Nut Drivers, Chalk Line Elec. Drill w/ Bits (Masonry Drill, Bits. & Anchors maybe required

More information

Austin Standing Seam Awning Assembly and Installation Instructions. Assembly Instructions

Austin Standing Seam Awning Assembly and Installation Instructions. Assembly Instructions Austin Standing Seam Awning Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use work gloves to handle

More information

Install Instructions. NewAge Steel Welded Tall Locker

Install Instructions. NewAge Steel Welded Tall Locker Kit Contains Full Width Adjustable Steel Shelves (4) Height-Adjustable Steel Leveling Legs (4) Aluminum Door Trim (2) 2.5 x ¼ Cabinet Mounting Lag Bolts (4) Large Zinc Plated Mounting Washers (4) 5/8 x

More information

Series 1100 Aluminum Door Canopy

Series 1100 Aluminum Door Canopy Series 00 Aluminum Door Canopy with Support Arms It is our recommendation that you read instructions carefully prior to assembly and installation. Series 00 with Support Arms MOUNTING BAR (A) TOP TRIM

More information

COURTYARD DOOR CANOPY INSTALLATION INSTRUCTIONS

COURTYARD DOOR CANOPY INSTALLATION INSTRUCTIONS COURTYARD DOOR CANOPY INSTALLATION INSTRUCTIONS Recommended Tools: Electric Drill w/ Bits, Rachet or Nut Driver w/ Sockets, Level, Tape Measure, Screw Drivers (Phillips & Regular), Ladder Before You Begin:

More information

Series 1500 Aluminum Door Canopy

Series 1500 Aluminum Door Canopy Series 500 Aluminum Door Canopy with Sidewings It is our recommendation that you read instructions carefully prior to assembly and installation. Series 500 with Sidewings mounting bar (A) top trim (B)

More information

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

COURTYARD PATIO COVER INSTALLATION INSTRUCTIONS

COURTYARD PATIO COVER INSTALLATION INSTRUCTIONS COURTYARD PATIO COVER INSTALLATION INSTRUCTIONS Recommended Tools: Electric Drill w/ Bits, Rachet or Nut Driver w/ Sockets, Level, Tape Measure, Screw Drivers (Phillips & Regular), Ladder Before You Begin:

More information

Grand Garden Chalet 6X3 Assembly Manual - Costco

Grand Garden Chalet 6X3 Assembly Manual - Costco Revision #16 March 22nd, 2013 Grand Garden Chalet 6X3 Assembly Manual - Costco Thank you for purchasing a Grand Garden Chalet. Please take the time to identify all the parts prior to assembly. Please use

More information

Austin Standing Seam Awning with Overhead Braces Assembly and Installation Instructions. Assembly Instructions

Austin Standing Seam Awning with Overhead Braces Assembly and Installation Instructions. Assembly Instructions Austin Standing Seam Awning with Overhead Braces Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use

More information

GIRTS ON BACK OF BUILDING

GIRTS ON BACK OF BUILDING GIRTS ON BACK OF BUILDING ALL GIRTS ARE 1 1/2 SQUARE TUBE. GIRT LENGTHS FOR 12, 20, 24, AND 30 WIDE BUILDINGS: ON 12 WIDE BUILDINGS GIRTS ARE 67 3/4 LONG ON 20 WIDE BUILDINGS GIRTS ARE 56 3/4 LONG ON 24

More information

Leveling Foot RB210. Leg Extender RLT66

Leveling Foot RB210. Leg Extender RLT66 Landing for Right & Left Turn R342 ITEMS # 0254049, 0254061, 0254072, 0254076, 0016567, 0254099, 0254110, 0054116, 0254117, 0254126, 0254140, 0254150, 0254156 CUSTOM ACCESS RAMP SYSTEM MODELS # R100, R242,

More information

x12 GAZEBO ASSEMBLY INSTRUCTIONS

x12 GAZEBO ASSEMBLY INSTRUCTIONS adlonco@hotmail.com 30 10 x1 GAZEBO ASSEMBLY INSTRUCTIONS Assembly with more than one person recommended 0 ZZZ-0.30.100-1.GP.EN.HER.doc Before you assemble the Gazebo It is important that this gazebo be

More information

x12 GAZEBO ASSEMBLY INSTRUCTIONS

x12 GAZEBO ASSEMBLY INSTRUCTIONS 30 10 x1 GAZEBO ASSEMBLY INSTRUCTIONS Assembly with more than one person recommended 0 L:\WP51\Instructions\SOLARIUMS INSTRUCTION BOOKS\30\ZZZ-0.30.0807-1.GP.EN.doc Step 1: Assemble beams A and B using

More information

x16 GAZEBO ASSEMBLY INSTRUCTIONS

x16 GAZEBO ASSEMBLY INSTRUCTIONS 36 1 x16 GAZEBO ASSEMBLY INSTRUCTIONS Assembly with more than one person recommended 0 L:\WP51\Instructions\SOLARIUMS INSTRUCTION BOOKS\36\ZZZ-05.36.0810-1.GP.EN.doc Step 1: Assemble beams A and B using

More information

PA1012 Pergola OWNER'S MANUAL. Please follow instructions. Suncast is not responsible for replacing parts damaged due to incorrect assembly.

PA1012 Pergola OWNER'S MANUAL. Please follow instructions. Suncast is not responsible for replacing parts damaged due to incorrect assembly. OWNER'S MANUAL PA1012 Pergola WARNING Repair or replace broken parts immediately. Suncast is not responsible for damage caused by weather or misuse. Avoid excess heat from any auxiliary source. This assembly

More information

VINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS

VINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS P a g e 1 VINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS Shown: 8' x 12' Vinyl Classic Pergola with 12" Top and Main Runner Spacing The design of this pergola is based on all posts being installed

More information

GENERAL INSTALLATION GUIDE: WARRANTY: PRODUCT INFORMATION T F

GENERAL INSTALLATION GUIDE: WARRANTY: PRODUCT INFORMATION T F GENERAL INSTALLATION GUIDE: Unless otherwise indicated, all Seven Oaks M.U. Architectural Products materials are to be used for decorative purposes only. All products must be installed using ample amount

More information

x16 GAZEBO ASSEMBLY INSTRUCTIONS

x16 GAZEBO ASSEMBLY INSTRUCTIONS adlonco@hotmail.com 36-3 1 x16 GAZEBO ASSEMBLY INSTRUCTIONS Two or more adults required for assembly 0 ZZZ-05.36-3.117-15.GP.EN.HER.doc Before you assemble the Gazebo It is important that this gazebo be

More information

Safety Glasses Safety Gloves Ladders Measuring Tape Spirit Level String Line. Tin-Snips Rivet Gun Caulking Gun Silicone Socket Set

Safety Glasses Safety Gloves Ladders Measuring Tape Spirit Level String Line. Tin-Snips Rivet Gun Caulking Gun Silicone Socket Set BEFORE YOU START Carefully read these instructions and refer to them constantly during each stage of construction. If you do not have all the necessary tools or information, contact Stratco for advice.

More information

Worktop. Weight Capacity. 100 lbs. 21 Corner Worktop. 48 Worktop. Fits over 2 Cabinets. 72 Worktop. Fits over 3 Cabinets. 200 lbs. 150 lbs.

Worktop. Weight Capacity. 100 lbs. 21 Corner Worktop. 48 Worktop. Fits over 2 Cabinets. 72 Worktop. Fits over 3 Cabinets. 200 lbs. 150 lbs. Bold.0 Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping

More information

GearBoss AirPro Locker

GearBoss AirPro Locker Installation and Owner s Instructions GearBoss AirPro Locker Wall Installation Island Installation Contents Important User Information...........................2 General...2 Manufacturer...2 Intended

More information

INSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED

INSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED INSTALLATION INSTRUCTIONS LS-12 12 X 12-2 X 7 1/2 FRAME ACTUAL FRAME BASE SIZE: 12 X 12-2 LOAFING SHED Our unique assembly process quickly transforms the individual pieces into a finished structure that

More information

Qwik-Fence Installation Instructions

Qwik-Fence Installation Instructions Qwik-Fence Installation Instructions 1 Tools Required The following installation instructions should be used as a guide for installing Folding Guard Qwik-Fence Partitions. Good common sense and appropriate

More information

Installation Instructions

Installation Instructions For Medium (15-18.5K) + Heavy duty (-8.5K) Air Conditioner READ BEFORE INSTALLING UNIT To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges

More information

ProLine PL80 HEAVY FRAMELESS BYPASS BATH ENCLOSURE

ProLine PL80 HEAVY FRAMELESS BYPASS BATH ENCLOSURE INSTALLATION INSTRUCTIONS ProLine PL80 HEAVY FRAMELESS BYPASS BATH ENCLOSURE Copyright Alumax Bath Enclosures 2013. All rights reserved. G03980849 5-1-13 Three-Year Limited Residential Warranty Alumax

More information

Heavy Wall Applied Stop Tube Frame and Door Installation

Heavy Wall Applied Stop Tube Frame and Door Installation INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems

More information

Series 1600 WeatherGuard Dock Enclosure

Series 1600 WeatherGuard Dock Enclosure Fairborn USA Inc. 205 Broadview Street Upper Sandusky, OH 43351 1-800-262-1188 Fax 1-419-294-4980 Series 1600 WeatherGuard Dock Enclosure All Models! WARNING Do not install this product unless you read

More information

Revision Date: April 01, Paramount Enclosure

Revision Date: April 01, Paramount Enclosure Paramount Enclosure www.urbanindustries.com 15 Urban Industries, Inc. 2008 Tools The following tools are recommended for the installation of the Paramount Aluminum Enclosure and roof. 1 2 Level 1 4 Level

More information

Keystone Garage Assembly Manual

Keystone Garage Assembly Manual Keystone Garage Assembly Manual 14x24 Garage Kit ships as shown Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST 13 8 deep AMISH ORIGINAL KEYSTONE 14x24 GARAGE s p e c i f i c a t i o n s Optional

More information

6x6 Maximizer Storage Shed Assembly Manual Version #9 Feb 26th, 2015

6x6 Maximizer Storage Shed Assembly Manual Version #9 Feb 26th, 2015 6x6 Maximizer Storage Shed Assembly Manual Version #9 Feb 26th, 2015 Thank you for purchasing a 6x6 Maximizer Storage Shed. Please take the time to identify all the parts prior to assembly. Please Note-

More information

Assembly Instructions. Item# L-GZ704PST

Assembly Instructions. Item# L-GZ704PST Assembly Instructions Item# L-GZ704PST GAZEBO ASSEMBLY INSTRUCTIONS Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The final product will

More information

STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS

STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS 1290363 Revision 1 12/16 Page 1 Weather Shield Mfg., Inc. NOTICE CAUTION! Failure to install and maintain our product according to these instructions

More information

INSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED

INSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED INSTALLATION INSTRUCTIONS LS-24 24 X 12-2 X 7 1/2 FRAME ACTUAL FRAME BASE SIZE: 24 X 12-2 LOAFING SHED Our unique assembly process quickly transforms the individual pieces into a finished structure that

More information

OUTDOOR GAZEBO ITM./ART MODEL#L-GZ682PCO-I ASSEMBLY INSTRUCTIONS

OUTDOOR GAZEBO ITM./ART MODEL#L-GZ682PCO-I ASSEMBLY INSTRUCTIONS OUTDOOR GAZEBO ITM./ART. 966731 MODEL#L-GZ62PCO-I ASSEMBLY INSTRUCTIONS IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY. Please check with your local governing authority / local municipal codes

More information

Horizontal Cable Systems

Horizontal Cable Systems ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm

More information

INSTRUCTION BOOK FOR. IDEA Screen & Panoramic for Nureva Span

INSTRUCTION BOOK FOR. IDEA Screen & Panoramic for Nureva Span INSTRUCTION BOOK FOR IDEA Screen & Panoramic for Nureva Span Disclaimer Milestone and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete.

More information

Hardware Box 1 1/4 Diameter x 3/4 Long Bolts 24 1/4 Nylon Lock Nut 24 1/4 Diameter x 3 Long Lag Bolt 8 1/4 Washers 56

Hardware Box 1 1/4 Diameter x 3/4 Long Bolts 24 1/4 Nylon Lock Nut 24 1/4 Diameter x 3 Long Lag Bolt 8 1/4 Washers 56 Warning: Excessive weight hazard! Use two or more people to move, assemble or install overhead rack to avoid back or other injury. Do not leave children unattended near overhead rack. High risk of injury

More information

ALL SEASON PATIO COVER

ALL SEASON PATIO COVER ALL SEASON PATIO COVER 61 Where the All Season Patio Cover is to be attached to the home, create a level line showing where the top of the mounting rail is to be located. Install each section with the

More information

Assembly Instructions

Assembly Instructions 10' and 12' Octagon Cedar Gazebo Assembly Instructions Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown revised 06/20/09 Cedar Gazebo Assembly Instructions

More information

Pacifica Pool House. Assembly Manual. Toll Free: Hours: 9-5 Monday-Friday EST. Package ships as shown. Suncast Corporation

Pacifica Pool House. Assembly Manual. Toll Free: Hours: 9-5 Monday-Friday EST. Package ships as shown. Suncast Corporation Pacifica Pool House Assembly Manual Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST Package ships as shown Simpson Hurricane Straps Double Insulated Raised-Panel Door in back wall (71 x71 Total opening)

More information

Worktop INDEX eight Capacity Unpacking

Worktop INDEX eight Capacity Unpacking Pro.0 Series Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of

More information

Octagon Vinyl Gazebo Assembly Instructions For 10 & 12 Models

Octagon Vinyl Gazebo Assembly Instructions For 10 & 12 Models Octagon Vinyl Gazebo Assembly Instructions For 10 & 12 Models Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown revised 04/29/09 Vinyl Gazebo Assembly

More information

Installation Instructions

Installation Instructions READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Follow each step as shown. Observe all local, state, and national electrical codes

More information

USE AND CARE GUIDE FIXED LED / LCD TV WALL MOUNT (UNIVERSAL MOUNTING PATTERN, FITS VESA

USE AND CARE GUIDE FIXED LED / LCD TV WALL MOUNT (UNIVERSAL MOUNTING PATTERN, FITS VESA Item #302-080 Model #50710 USE ND CRE GUIDE FIXED LED / LCD TV WLL MOUNT (UNIVERSL MOUNTING PTTERN, FITS VES 100/200/300/400/600) Questions, problems, missing parts? Before returning to the store, call

More information

INSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED

INSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED INSTALLATION INSTRUCTIONS LS-30 30 X 12-2 X 7 1/2 FRAME ACTUAL FRAME BASE SIZE: 30 X 12-2 LOAFING SHED Our unique assembly process quickly transforms the individual pieces into a finished structure that

More information

Double Beam Freestanding Pergola Installation Guide

Double Beam Freestanding Pergola Installation Guide Double Beam Freestanding Pergola Installation Guide Patent Pending. Copyright 2011 USAVinyl, LLC - All Rights Reserved The information contained in these instructions are proprietary to USAVinyl, LLC and

More information

Assembly Instructions

Assembly Instructions Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt

More information

** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at:

** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at: 3/01/2007 VISIT THE LITIME WEB SITE: WWW.LITIME.COM ** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at: 1 (800) 225-3865 Double Shed Doors for Back

More information

Pergola Installation Guide

Pergola Installation Guide Pergola Installation Guide When only the best will do. 1 Tools Needed Installation Tools for assembly Drill(s) Miter or Circular Saw with carbide blade (cut slowly) ½" Drill Bit 5 /8" Drill Bit 5 /16"

More information

RUN-IN SHED INSTRUCTIONS

RUN-IN SHED INSTRUCTIONS RUN-IN SHED INSTRUCTIONS 14321 5th Line Nassagaweya, Rockwood, ON, N0B 2K0 Phone 519-856-9959 ~ Fax 519-856-4141 Toll Free 1-800-461-3362 ~ Email sales@systemhorse.com Website www.systemfence.com RUN-IN

More information

Phone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels

Phone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Phone # 800-440-8785 www.lajolladoors.com La Jolla Doors Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Thank you for choosing La Jolla Doors In this manual you will

More information

The Heritage Pergola

The Heritage Pergola Eye Level Corporation One Trefoil Drive Trumbull, CT 06611 USA Phone: 888.782.1760 Fax: 888.782.1761 www.@eyelevelliving.com The Heritage Pergola Installation Instructions ARBORS COLUMNS HOSE REELS MAILBOX

More information

Pocket Door Installation Instructions

Pocket Door Installation Instructions Installation Instructions Before getting started: Read instructions thoroughly. Be sure that you have the necessary tools and materials before starting the installation. Consult your local building code

More information

Knock Down Patio Door Assembly Instructions Regular & Impact

Knock Down Patio Door Assembly Instructions Regular & Impact Knock Down Patio Door Assembly Instructions Regular & Impact 72 x 80 72 x 82 72 x 96 96 x 80 96 x 82 96 x 96 Impress the Weather KD Patio Door Regular & Impact Sizes 72 x 80 72 x 82 72 x 96 96 x 80 96

More information

Performance 2.0 Series

Performance 2.0 Series Performance. Series Warning: Excessive weight hazard! Warning: Excessive weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave children

More information

Installation Instructions Edge Storage System

Installation Instructions Edge Storage System Installation Instructions Edge Storage System IMPORTANT: Product is packed on pallets by individual bank. Do not mix components from different pallets together. Use the Specific Part List to determine

More information

RITE-HITE RAINGUARD TM

RITE-HITE RAINGUARD TM RITE-HITE RAINGUARD TM RG-3000 Trailer Top Seal Installation Instructions & Owner s Manual Date of Installation: This Manual Covers All Units Shipped 8/04 to Date PRINTED IN U.S.A. PUBLICATION NO. RG30-0010

More information

Sliding Door Kit

Sliding Door Kit YOU MUST READ THIS DOCUMENT BEFORE YOU BEGIN TO ASSEMBLE THE DOOR KIT. Thank you for purchasing this GrowSpan door kit. When properly assembled and maintained, this product will provide years of reliable

More information

Installation Instructions

Installation Instructions For Medium (15-18.5K) + Heavy duty (22-28.5K) Air Conditioner READ BEFORE INSTALLING UNIT To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp

More information

Best Barns USA. the Brookhaven 10' x 16' Assembly Book. revised March 23, 2016

Best Barns USA. the Brookhaven 10' x 16' Assembly Book. revised March 23, 2016 Best Barns USA Assembly Book revised March 23, 2016 the Brookhaven 10' x 16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.

More information

ATLANTIS RAIL Contact Information

ATLANTIS RAIL Contact Information ATLANTIS RAIL Contact Information Customer Service (800) 541-6829 (508) 732-9191 Spectrum System Installation Instructions Atlantis Rail s Spectrum System is an easy to install, universal cable railing

More information

FIXED-POSITION WALL MOUNT FOR TVs in.

FIXED-POSITION WALL MOUNT FOR TVs in. INSTALLATION GUIDE FIXED-POSITION WALL MOUNT FOR TVs 19-39 in. NS-HTVMFAB For wood-stud, solid concrete wall, or concrete block installations Safety information and specifications..... 2 Tools needed.............................

More information

Sonoma Outdoor Kitchen Pergola. Assembly Instructions

Sonoma Outdoor Kitchen Pergola. Assembly Instructions Sonoma Outdoor Kitchen Pergola Assembly Instructions Introduction Thank you for your purchase from The Outdoor GreatRoom Company. This pergola has been engineered and manufactured in the USA. This user

More information

TREX PERGOLA INSTALLATION INSTRUCTIONS

TREX PERGOLA INSTALLATION INSTRUCTIONS RECOMMENDED TOOLS/SUPPLIES: Pencil 4' Level Measuring Tape Framing Square/Speed Square 8' High Step Ladder (Two recommended) Hacksaw or Bolt Cutters Socket Wrench with 9/16" Socket and 3/4" Deep Socket

More information

Grand Garden Chalet 6X3 Assembly Manual

Grand Garden Chalet 6X3 Assembly Manual Revision #11 June 15, 2010 Grand Garden Chalet 6X3 Assembly Manual Thank you for purchasing a Grand Garden Chalet. Please take the time to identify all the parts prior to assembly. Please use Safety Eyewear

More information

Installation Guidelines

Installation Guidelines Page 1 Two inch () Porch Screening System Extruded Screen Walls Only Kit Installation Guidelines Tools You ll Need 4 ft. Carpenter s level Chalk line (to mark U channel locations) Chop saw with a metal

More information

MODERN PERGOLA INSTALLATION GUIDE. When only the best will do.

MODERN PERGOLA INSTALLATION GUIDE. When only the best will do. MODERN PERGOLA INSTALLATION GUIDE When only the best will do. TOOLS LIST Drill(s) 3/8" Magnetic Driver (s) 12" Drill Extension #2 Square Drive bit for Drill or Driver Level Tape Measure Hammer Drill if

More information

Assembly Instructions 10 X 10 Aluminum Frame Building

Assembly Instructions 10 X 10 Aluminum Frame Building Assembly Instructions 10 X 10 Aluminum Frame Building 27 97 9 8 47 36 74 52 10 10 X 10 Square Building W/ Dome Includes: The Steel Entry Door with a Dead Bolt Lock assembly and Aluminum Door Frame. Metal

More information

W1610 1/2 10 X 16 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is suggested.

W1610 1/2 10 X 16 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is suggested. adlonco@hotmail.com W60 / 0 X 6 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is suggested. Requires 96 clearance at the wall Base Dimensions 90 x 8, Largest Dimensions 90 x (see pg.3)

More information

INSTALLATION GUIDE WOOD PIVOTING CIRCLE/ OVAL

INSTALLATION GUIDE WOOD PIVOTING CIRCLE/ OVAL WOOD PIVOTING CIRCLE/ OVAL READ SPECIFIC INSTALLATION INSTRUCTIONS COMPLETELY BEFORE STARTING ANY INSTALLATION Failure to install and maintain our product according to these instructions will VOID any

More information

Octagon Vinyl Gazebo Assembly Instructions

Octagon Vinyl Gazebo Assembly Instructions Octagon Vinyl Gazebo Assembly Instructions For 10 & 12 Models Toll Free: 866.768.8465 Hours: 9-5 Monday-Friday EST www.homeplacestructures.com Package ships as shown revised 04/29/09 Vinyl Gazebo Assembly

More information

340 & 350 SERIES BATH ENCLOSURES

340 & 350 SERIES BATH ENCLOSURES INSTALLATION INSTRUCTIONS 340 & 350 SERIES BATH ENCLOSURES 800-643-1514 www.alumaxbath.com Copyright Alumax Bath Enclosures 2010. All rights reserved. LIMITED WARRANTY AND REMEDY ALUMAX BATH ENCLOSURES

More information

GrowSpan Estate Pro I Greenhouse

GrowSpan Estate Pro I Greenhouse GrowSpan Estate Pro I Greenhouse Photo may show a different but similar model. 2016 Growers Supply All Rights Reserved. Reproduction is prohibited without permission. STK# DIMENSIONS 104564 11'-8" W x

More information

CURVED ROOF ASSEMBLY INSTRUCTIONS ATTACHED VERANDAH. Your supplementary guide to building an ATTACHED CURVED ROOF VERANDAH or PATIO BEFORE YOU START

CURVED ROOF ASSEMBLY INSTRUCTIONS ATTACHED VERANDAH. Your supplementary guide to building an ATTACHED CURVED ROOF VERANDAH or PATIO BEFORE YOU START ROOF ATTACHED VERANDAH ASSEMBLY INSTRUCTIONS Your supplementary guide to building an ATTACHED ROOF VERANDAH or PATIO This set of instructions should be used in conjunction with the Stratco instruction

More information

Vinyl Gazebo Instructions

Vinyl Gazebo Instructions P a g e 1 Vinyl Gazebo Instructions 10 Vinyl Gazebo Shown Thank you for the purchase of your New Gazebo. Depending on the size of your Gazebo, installation can usually be completed in 1 to 2 days. These

More information

Page 1 of 18. SunRail System Installation Instructions

Page 1 of 18. SunRail System Installation Instructions Page 1 of 18 SunRail System Installation Instructions Page 2 of 18 SunRail Stainless Steel Railing Installation Guide Table of Contents Before You Begin 3 Installing Surface Mount Bases for a Two Rail

More information

6400, 8400 and 9400 Series Sliding Patio Door

6400, 8400 and 9400 Series Sliding Patio Door Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel

More information

CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS

CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS Assembled cabanas are large & heavy. Assemble at place of use. CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS Step 1 CAUTION: To avoid damage to the finish of your Cabana frame, prepare a smooth, non-scratch

More information