DECORATIVE GRILLES & PERFORATED SHEETS ORDER FORM GUIDE
|
|
- Lenard Daniels
- 5 years ago
- Views:
Transcription
1 DECORATIVE GRILLES & PERFORATED SHEETS ORDER FORM GUIDE
2 DECORATIVE GRILLE SELECTION FORM CLIENT NAME: PROJECT ADDRESS: CLIENT NUMBER: PLEASE CIRCLE THE FINISH: POLISHED BRASS LACQUERED POLISHED BRASS UNLACQUERED ANTIQUE BRASS LACQUERED BRONZE METAL ANTIQUE LACQUERED (BLACK) POLISHED NICKEL SATIN NICKEL ANTIQUE NICKEL POLISHED CHROME SATIN CHROME ANTIQUE COPPER Panel # Width (mm) Height (mm)
3 DESIGN CONSIDERATIONS FOR HAND ASSEMBLED AND HAND WOVEN GRILLES. * The maximum size for hand assembled and hand woven grilles is 700 x 1200mm. * Ensure you have provided a space allowance around the grille to allow it to fit into the rebate. * When rosettes are specified, they are not placed within 20mm of the grille edge to allow for fixing into a rebate. * The thickness of hand assembled grilles is about 3.5 to 4mm composed of 3mm solid brass square rod plus either 0.5m for fine mesh or 1mm for course mesh. * Hand assembled grilles are fixed together with plain pins or rosettes on pins which present to the front side. On the rear these are bent over and secure the mesh. * Hand assembled and hand-woven grilles are custom made to specfic size and cannot be cut or trimmed in size. * Perforated sheets purchased as a full 660mm x 1000mm sheet will have a salvage edge around the perimeter. * Backing meshes may not exactly match the grille finish for all finishes as different brass materials respond differently to the finishing process. Please use the appropriate worksheet and follow the options, circling the desired outcome as you go. Have fun! NOTE: All drawings are indicative only.
4 SQUARE HAND ASSEMBLED GRILLES WHICH STYLE: 38mm 54mm 25mm S25 SQUARE 25mm (1"") S38 SQUARE 38mm (1 1/2"") S54 SQUARE 54mm (2 1/8"")" TYPE OF ROSETTE: FLORAL rosettes PLAIN rosettes No mesh PIN (No rosettes) LAYOUT OF ROSETTE: None, just pinheads On alternative intersections On every intersection
5 DIAMOND HAND ASSEMBLED GRILLES WHICH STYLE: mm 70 D25 DIAMOND 25mm (1 ) D38 DIAMOND 38mm (1 1/2 ) D54 DIAMOND 54mm (2 1/8 ) TYPE OF ROSETTE: FLORAL rosettes PLAIN rosettes No mesh PIN (No rosettes) None, just pinheads On alternative intersections On every intersection
6 ELLIPTICAL HAND ASSEMBLED GRILLES WHICH STYLE: Min. 200mm NOTE: WE DON T RECOMMEND ELLIPTICAL GRILLES WHERE YOUR PANEL SIZES VARY. THE ELLIPSE SHAPE SCALES & STRETCHES DEPENDING ON THE PANEL SIZE, THEREFORE LOOKS INCONSISTENT IF USED THROUGHOUT A PROJECT. SUITS ONE OFF MEDIUM SIZE PANELS. Min. 200mm ELLIPTICAL HORIZONTAL ELLIPTICAL VERTICAL Minimum width of 200mm (8 ) across the ellipse as show by the black arrows. TYPE OF ROSETTE: FLORAL rosettes PLAIN rosettes No mesh PIN (No rosettes) LAYOUT OF ROSETTE: None, just pinheads On alternative intersections On every intersection
7 SQUARE PLAIN HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN SQUARE PLAIN METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm 4.5mm Plain 6mm Plain Overall size of the frame frame: H mm x W mm 4.5mm Plain Aluminum 4.5mm Plain 6mm Plain Are screw holes required in the frame for fixing? Yes please No thanks 4.5mm Plain 6mm Plain APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
8 SQUARE REEDED HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN SQUARE REEDED METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm 4.5mm Reeded 6mm Reeded Overall size of the frame frame: H mm x W mm 4.5mm Reeded Aluminum 4.5mm Reeded 6mm Reeded Are screw holes required in the frame for fixing? Yes please No thanks 4.5mm Reeded 6mm Reeded APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
9 DIAMOND PLAIN HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DIAMOND PLAIN METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm 4.5mm Plain 6mm Plain Overall size of the frame frame: H mm x W mm 4.5mm Plain Aluminum 4.5mm Plain 6mm Plain Are screw holes required in the frame for fixing? Yes please No thanks 4.5mm Plain 6mm Plain APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
10 DIAMOND REEDED HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DIAMOND REEDED METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm 4.5mm Reeded 6mm Reeded Overall size of the frame frame: H mm x W mm 4.5mm Reeded Aluminum 4.5mm Reeded 6mm Reeded Are screw holes required in the frame for fixing? Yes please No thanks 4.5mm Reeded 6mm Reeded APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm
11 DOUBLE SQUARE PLAIN HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE SQUARE PLAIN METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
12 DOUBLE SQUARE REEDED HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE SQUARE REEDED METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
13 DOUBLE DIAMOND PLAIN HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE DIAMOND PLAIN METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm No mesh
14 DOUBLE DIAMOND REEDED HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE DIAMOND REEDED METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 7mm / 10mm / 13mm 19mm / 25mm
15 DOUBLE RECTANGLE HAND WOVEN GRILLES Hand-assembled and hand-woven grilles are available fixed into an outer frame in the same finish as the grille. If FRAMES are required, please also answer following questions: Type of frame required: HAND-WOVEN DOUBLE RECTANGLE METAL STRIP MATERIAL: Angle section Flat section T section Face width: 12mm 19mm Overall size of the frame frame: Aluminum H mm x W mm Are screw holes required in the frame for fixing? Yes please No thanks APERTURE SIZE: 5mm x 5mm then 12mm x 5mm
16 PERFORATED SHEETS Maximum sheet size is 660mm x 1000mm. All sheets have a salvage edge with no pattern, which can vary between 4mm and 40mm per sheet. Please contact us for exact size of usable are for each pattern. 1MM THICK PERFORATED SHEETS: FINISH OPTIONS: SATIN NICKEL ON BRASS POLISHED NICKEL ON BRASS POLISHED BRASS SMALL SWORD 16MM SMALL CLUB 5MM LARGE CLUB 19MM SQUARE 6MM SQUARE 10MM DIAMOND 7.5MM SLOT & DIAMOND FLEUR DE LYS FANCY RING ROUND 6.35MM Aluminium Aluminium No Mesh
17
18
STAINLESS STEEL & BRASS GRILLES
STAINLESS STEEL & BRASS GRILLES Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk - www.jprservices.co.uk
More informationJ C V E N T S. Stainless Steel & Brass Grilles. Architectural Mesh Stainless Steel and Brass Grilles
Publication Section Standard Weather LOUVRES APRIL 2005 Stainless Steel & Brass Grilles Architectural Mesh Stainless Steel and Brass Grilles Mesh Grilles introduction To compliment the range of air handling
More informationCustom Hand-Crafted Wire Mesh Grillework
Custom Hand-Crafted Wire Mesh Grillework Klise Manufacturing Company 601 Maryland Avenue, N.E. Grand Rapids, MI 49505 616-459-4283 Fax 616-459-4062 klise@klisedesign.com www.klisedesign.com Grabill Cabinet
More informationArchitectural Door & Cabinet Hardware
Architectural Door & Cabinet Hardware TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationArchitectural Door & Cabinet Door
Architectural Door & Cabinet Door A1 TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationSilver Kite Architectural Ironmongery - Classic Range Mortice Knobs - 1 of 6
Mortice Knobs - 1 of 6 34020 34021 34022 34023 34020 Mortice knob knob diameter 66 rose diameter 66 34021 Mortice knob knob diameter 57 rose diameter 58 34022 Mortice knob knob diameter 49 rose diameter
More informationWALL PLATES & SPECIALTIES
& SPECIALTIES SWP26LA Screwless Polycarbonate Wall Plates A F A. Molded of rugged.065" thick polycarbonate. B. Seamless, sleek, super smooth construction provides no dirt-catching channel around plate
More informationSection 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
More informationCabinet Rim lock, Push Button type, - 25 mm backset Page 2-3
Izerwaren Order numbers 25.191. Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3 Cabinet Rim lock, backset 25 mm - 1 Minimum door thickness 19 mm ~3/4 Strike plate not included with lock Both
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
More informationPD8000/PD5000 Series. UNISON HARDWARE, INC. (Edition 2) Version: 2016.v1
(Edition 2) PD8000/PD5000 Series UNISON HARDWARE, INC. www.inoxproducts.com Version: 2016.v1 TABLE OF CONTENTS PD8000/PD5000 Series Mortise Lock Page 4 How to Order: PD8000 Mortise Locks with Flush Pulls
More informationTailor-made services for the benefit of your image TECHNICAL CATALOGUE STANDARD PRODUCTS.
Tailor-made services for the benefit of your image TECHNICAL CATALOGUE STANDARD PRODUCTS www.huguenin-sandoz.ch info@huguenin-sandoz.ch WATCH STANDS ADAPTABLE TO YOUR REQUIREMENTS Standard watch stands
More informationbaldwin 5" High, Solid Brass Solid Brass
Tel (45) 552-5500 www.macpac.com DOOR KNOCKERS BALDWIN door knockers BALDWIN HOUSE NUMBERS 5" High, baldwin COLONIAL 6.5" x 3.5" C/C of bolts: 4" Available w/observ-o-scope* 002-003 Lifetime Pol. Brass
More informationShutter units arrive assembled and ready to install with detailed installation instructions. Traditional Shutter Construction Features
Horizon Specifications & Measuring Instructions Horizon traditional shutters install to a window using one of three systems. The most basic and popular approach attaches shutters inside of the window opening
More informationSOLID BRASS - DEADBOLTS
SOLID BRASS - Standard with Brass Deadbolt Locks Solid Brass Cylinder, Housing, Collar and Rosette Regular Style 8450 8350 Polished Brass (US3) $40.00 $42.00 Low Profile Style Includes Extension Collar
More informationPolished Brass. Stainless Steel
Specifications Thermoset SP Series Nylon TP Series Screwless Polycarbonate SWP Series 302/304 Stainless Steel Polished Brass Brushed Brass Aluminum Application Legrand's broad line of Pass & Seymour Size
More informationSTAIRSERVICE.COM. Stair system design and selection catalog. A step ahead, a step above 1 (800) Fax (408)
STAIRSERVICE.COM A step ahead, a step above Stair system design and selection catalog. 1 (800) 940-1057 1545 Berger Drive San Jose, CA 95112 Fax (408) 920-0109 Sales@stairservice.com Step by step Design
More informationSmall Format Interchangeable Core
Small Format Interchangeable Core Model # Description Finishes MBS Small Format 606 - Satin Brass Interhangeable Core 613 - Anodized Oil Rubbed Bronze 626 - Satin Chrome u Compatible with housing from
More informationNEW! CONCEALED SURFACE MOUNT FOR DOOR PULLS
NEW! CONCEALED SURFACE MOUNT FOR Mount () NEW Most standard appliance pulls and door pulls are available with mounting. Fits minimum door thickness of 1¼". Supplied with: One grip with 3/ diameter hole
More informationArchitectural Aluminum Frames
Specialty requirements for room identification and control are accomplished with these unique frames. They feature built-in changeable messages, magnetic changeable signs and frames with dividers. Frames
More informationWALL PLATES & SPECIALTIES
& SPECIALTIES SWP26LA Screwless Polycarbonate Wall Plates A F A. Molded of rugged.065" thick polycarbonate. B. Seamless, sleek, super smooth construction provides no dirt-catching channel around plate
More informationKM DIGITECH MACHINE SERIES
KM DIGITECH MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: 104N 702N 703N Your Global Source for Wire Processing Perishable Tooling www.lakesprecision.com 270 KM DIGITECH
More informationClassic Lamp Parts. now offers a wide range of High Quality Finished Parts, including Finials, Necks, Harps, Canopies, Check Rings and More!
Classic Lamp Parts now offers a wide range of High Quality ed Parts, including Finials, Necks, Harps, Canopies, Check Rings and More! Available finishes include: Polished Brass, Satin Brass, Polished Nickel,
More information1Woodwright Insert Windows
1Woodwright Insert Windows Parts Catalog Main Menu Section TOC Search What s in This Section Double-Hung, Picture & Transom Insert Windows....................... Page 3 Parts Illustration...........................................................
More informationOperating Manual. for CUTTING, PERFORATING, BENDING SLB120
Operating Manual for CUTTING, PERFORATING, BENDING SLB120 31040\B06eng 0896 0 Contents 1. Scope of delivery... 1 2. Technical specifications... 1 3. Applications... 1 4. Commissioning... 2 5. Cutting...
More informationSEATING STYLES & SUNDRIES CATALOGUE
SEATING STYLES & SUNDRIES CATALOGUE Issue B COPYRIGHT 2018 ATLAS CONTRACT FURNITURE EXCEPTIONAL CONTRACT FURNITURE Atlas Contract Furniture is one of the UK s most experienced manufacturers of contract
More informationAndersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section. Clad French Casement Windows...
Andersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section Clad French Casement Windows... Page 3 Part Illustrations... 3 Parts Illustration - Operating Windows... 3 Parts
More informationShutter units arrive assembled and ready to install with detailed installation instructions. Plantation Shutter Construction Features
Wood Plantation Shutters Specifications & Measuring Instructions Horizon plantation shutters install to a window using one of three systems. The most basic and popular approach attaches shutters inside
More informationTable and Furniture Base Fittings Table Legs and Table Bases
Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:
More informationProline Medicine Cabinets and Mirrors
Proline Medicine Cabinets and Mirrors Economical 14x18 Molded Body Cabinets High Impact Polystyrene plastic body for a no rust interior. Classic value with integral shelves. Subtle satin finish on the
More informationWindow Style Pole Range
Window Style Pole Range 16/19mm telescopic pole. Telescopic / Bay Pole Range Gold Silver Gold Ball Black Silver Crook Available See Main Black Twisted Cage Sizes Twisted Cage Crook Ball 1.2m 2.0m (3 11
More information37
www.stairtrends.com 37 Iron Baluster Measurment Tips StairTrends iron balusters are 44 in length with details centered 18 from the top unless noted. Cut as needed from the bottom. 1/2 SQUARE Most square
More informationDiscuss your project with a Locker Group Architectural Consultant at the outset, to ensure you achieve the best results.
Technical Data Sheet PIC PERF SPECIFICATION Sheet No: LP-105.3 April 2011 Pic Perf is a digitally created image produced in Perforated Metal. Pic Perf is available in a wide variety of specifications,
More informationDecember 2014 Club Scrap. Reunion
Assembly Line Scrapbooking December 2014 Club Scrap Reunion Materials: Reunion Kit with Embellishment Option Reunion Unmounted (UM) Borders & Backgrounds Tools and Supplies: 12 Paper Trimmer Adhesive Tape
More informationShutter units arrive fully assembled and ready to install with detailed installation instructions. Poly Plantation Shutter Construction Features
Poly Plantation Shutter Construction Features Poly Plantation Shutters Measuring Instructions Horizon poly plantation shutters install to a window using one of three systems. The most basic and popular
More informationWALL PLATES & SPECIALTIES
& SPECIALTIES SWP26LA Screwless Polycarbonate Wall Plates A F A. Molded of rugged.065" thick polycarbonate. B. Seamless, sleek, super smooth construction provides no dirt-catching channel around plate
More informationPolished Brass. Stainless Steel
Specifications Thermoset SP Series Nylon TP Series Screwless Polycarbonate SWP Series 302/304 Stainless Steel Polished Brass Brushed Brass Aluminum Application Legrand's broad line of Pass & Seymour Size
More informationSpatula. Spatula SW 2015 Design & Communication Graphics Page 1
Spatula Introduction: The model shown in the picture is made of three parts, - the base, the washer and the handle. The base requires the use of Spline and Style Spline command, Slot command and Mirror
More information800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings
More informationPD8000/PD5000 Series. (Edition 3) NEW RELEASE SUMMER UNISON HARDWARE, INC. Version: 2016.v3
(Edition 3) PD8000/PD5000 Series NEW RELEASE SUMMER 2016 UNISON HARDWARE, INC. www.inoxproducts.com Version: 2016.v3 TABLE OF CONTENTS INOX PD8000/PD5000 Series Mortise Locks Page 1 Description, Parts
More informationJanuary 2013 Club Scrap Random Doorways
January 2013 Club Scrap Random Doorways Materials: Random Doorways CS Kit with Embellishment Pack Tools and Supplies: 12 Paper Trimmer Adhesive Foam Adhesive Tape 3x14 CS Grid Ruler Scissors Paper Piercing
More informationMatching Finishes. 6 Collections. 9 Finishes. for the bath. Match The Faucet Finish. Towel Bars Three towel bar lengths 18, 24, 30 Single & Double
for the bath 6 Collections Traditional Tuscany, Edwardian 9 Finishes Transitional Hudson, Stratton Finishes that match up with our cabinet hardware finishes. Finishes that match up with popular faucet
More informationQuilt. Quilt design & instructions copyright Tamara Kate Design
Quilt Quilt design & instructions copyright Tamara Kate Design www.kayajoydesigns.com Finished Quilt Size: 40 x 49 Fabric Requirements Skill Level: Intermediate - For rainbow triangles: 72 charm squares
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationAllen & Allen Company
Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No. 7000 carriers, two
More informationMINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
More informationPolished Brass. Stainless Steel
Specifications Thermoset SP Series Nylon TP Series Screwless Polycarbonate SWP Series 302/304 Stainless Steel Polished Brass Brushed Brass Aluminum Application Legrand's broad line of Pass & Seymour Size
More informationLawson SSR Registration System Instructions
Lawson SSR Registration System Instructions Quick on-press registration -- because the SSR System mimics your press. Overview p.2 Instructions p.2 Pin Bar System p.7 314-382-9300 FAX 314382-3012 revised
More informationSketching Fundamentals
Sketching Fundamentals Learning Outcome When you complete this module you will be able to: Make basic engineering sketches of plant equipment. Learning Objectives Here is what you will be able to do when
More informationSP Polished Silver. BS Butlers Silver. AS Antique Silver. CHB Chestnut Bronze. Care of finish Care of finish Care of finish Care of finish
SP Polished Silver BS Butlers Silver AS Antique Silver CHB Chestnut Bronze 92.5% pure silver plate on top of a highly polished, mirror finish, solid brass surface. This is an unlacquered living finish,
More informationB R I L L I A N T I D E A S F O R H O M E
Features Specially formulated acrylic 70% lighter than glass Patented factory assembly process Preassembled to your order No grouting required Works in casement and awning windows Lighted options available
More informationB R I L L I A N T I D E A S F O R H O M E
B R I L L I A N T I D E A S F O R H O M E Kitchen + Bath www.hy-lite.com Multiple sizes and colors allow Hy-Lite Acrylic Blocks to perform in a multitude of applications around the kitchen... from expansive
More informationFreestanding Screens Log Holders Tool Sets Hoods Lintels. Fireplace Screens Accessories& From the Heart of the Craftsman...
Freestanding Screens Log Holders Tool Sets Hoods Lintels Fireplace Screens Accessories& From the Heart of the Craftsman... TRADITIONAL collection t Traditional Rectangle p Traditional Foot Traditional
More information400 Series Woodwright Insert Windows (2005 to Present)
400 Series Woodwright Insert Windows (2005 to Present) ZParts Catalog Main Menu Section TOC Search What s in This Section Double-Hung, Picture & Transom Insert Windows....................... Page 3 Parts
More informationMachine Your Fishing Reel
Machine Your Fishing Reel You will be well prepared for the coming season if you start on this smooth-running job now. IF you're an enthusiastic fisherman and have a lathe in your workshop, we'll say no
More informationGet Creative. Product Info Ideas Videos Guidelines. Rail Fastening Innovations. Balcony Connect level hand rail to newel
Get Creative www.creativestairparts.com Check back FREQUENTLY for new ideas, tips, and innovations Product Info Ideas Videos Guidelines Rake Connect hand rail to newel Details on Page 54 Rail Fastening
More informationDowelling joints with VS 600
No. 112 Dowelling joints with VS 600 A Description Dowelling joints with round dowels (in addition to flat dowels) are part of the standard wood joints in furniture manufacture. This joint is very stable.
More informationPrinciples of Engineering
Principles of Engineering Unit 2.1 Manufacturing & Materials Tic-Tac-Toe Game Project Design Brief Client: Wilson School District Target Consumer: I-STEM Students Problem Statement: Create a project that
More informationWALL PLATES & SPECIALTIES
& SPECIALTIES SWP26LA Screwless Polycarbonate Wall Plates A F A. Molded of rugged.065" thick polycarbonate. B. Seamless, sleek, super smooth construction provides no dirt-catching channel around plate
More informationInstallation Instructions Window Headers
www.midamericacomponents.com Note: The illustrations contained in these instructions use a 9" Header and Base for examples. A 6" Header and Base can be used just as easily. Step 1 Measure the width of
More informationARIZ NA www.arizonamodels.com Lewis.30 cal MACHINE GUN KIT Assembly Directions- All Scales Reprinted with the permission of Air Age Publications Inc. Lewis Gun Arrangements use for option variations and
More informationceiling. slots and strain clamps. *For custom baffle, reflector, trim ring, glass color and lens options, please consult factory.
10 (254 mm) 12-24 (305 mm - 610 mm) (184 mm) 6-1/2 (165 mm) 7 (178 mm) A B E C D New construction, thermally protected, IC rated specification grade recessed housing. Accommodates up to 75W PAR30, R30
More informationDrake & Wrigley s extensive range of architectural hardware is produced entirely in commercial grade nonferrous metals, primarily solid brass, zinc and stainless steel. A wide choice of colours can also
More informationthe couture collection
the couture collection Introducing The Baldwin Couture Collection Like jewelry for the home, this exquisite collection of high-style knobs and roses dresses the luxury home with singular style. Six new
More informationMANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
More informationGreat Outdoors. October 2007 Club Scrap. Materials: Club Scrap Great Outdoors Kit Embellishment Pack Wood Mounted Stamp Set UM Borders and Backgrounds
October 2007 Club Scrap Great Outdoors Materials: Club Scrap Great Outdoors Kit Embellishment Pack Wood Mounted Stamp Set UM Borders and Backgrounds Tools: 12 Paper Trimmer Adhesive Tape Paper Piercing
More informationMarch 2015 Club Scrap Deluxe. 50s Kitchen. Preparation: Trim the White and Aqua Printed Cutaparts into sections as indicated by the artwork.
Assembly Line Scrapbooking March 2015 Club Scrap Deluxe 50s Kitchen Materials: 50s Kitchen Deluxe Kit with Embellishment Option Tools and Supplies: 12 Paper Trimmer Adhesive Tape Measurement Conversions:.125
More informationGRID PANEL SYSTEM Installation Instructions
Ceiling Top Edge Trim Shim GRID PANEL SYSTEM Installation Instructions Installation is simple & fast using Ambienta Grid Horizontal Reveal Option for Horizontal Reveals & Edge Trim to be punched with slotted
More informationClassic Exposed Tee System (24" x 24", 24" x 48", and 24" x 72") Floating Clouds and Perimeter Wall Attachment
Ceiling Systems SERPENTINA Classic Exposed Tee System (24" x 24", 24" x 48", and 24" x 72") Floating Clouds and Perimeter Wall Attachment Installation Instructions The 3-Dimensional Ceiling System consists
More informationCOUNTERTOP Specifications 5.1.2
COUNTERTOP Specifications 5.1.2 Countertop Items 500, 502, 503, 550, 552, 553, 600, 602, 603, 650, 652 & 653 Rectangular Front Countertop for Single Round Basin Item No. 500 for Double Round Basin Item
More informationMIRRORS & CABINETS. Counterpoint by Barbara Barry. Counterpoint Medicine Cabinet P Finish Options. Brushed Nickel (-AG) Nickel Silver (-AD)
Mirrors & Cabinets Counterpoint Medicine Cabinet P74306-00 Finish Options Counterpoint by Barbara Barry MIRRORS & CABINETS Chrome (-CP) Nickel Silver (-AD) Brushed Nickel (-AG) 4.1 FEATURES Energy-Saving
More informationCUSTOM WINDOWS & DOORS
CUSTOM WINDOWS & DOORS RECLAIMED DOUGLAS FIR Renewable & Reusable Wood Decorative Accents Wood Options reclaimed douglas fir renewable & reusable Salvaged and Stylish We ve breathed new life into old wood
More informationPAWOMAT MACHINE SERIES
PAWOMAT MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: PAWOMAT MACHINE SERIES B-12-N B-12, B-16, 210B MINICRIMP MACHINE SERIES Your Global Source for Wire Processing Perishable
More informationWA7000. (rev )
M-Series Push-Out Casement WA7000 Copyright 2018 Reveal Windows & Doors All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Reveal
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
More informationSPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall.
SPECIAL HINGES From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. 0 GRASS THE CATALOGUE 0-0 SPECIAL HINGES Hinges for special applications. Where individual
More informationRod Display Systems. Catalogue. Cable Display / Rod Display / Standoff Display
Rod Display Systems Catalogue Cable Display / Rod Display / Standoff Display 6mm (1/4") Rod - Fixing Kits Floor to Ceiling Fixing Kit RK-6000 18.5mm (3/4") dia. top fi xing Floor fi xing with adjustable
More informationHOLMES WROUGHT IRON BALUSTERS PRODUCT GUIDE V3
HOLMES stair parts WROUGHT IRON BALUSTERS PRODUCT GUIDE V3 1 2 INDEX Elements............... 4 Color & Texture............ 5 Twist & Basket Series.......... 6 Ribbon Series............. 7 Gothic Series.............
More informationSetup. The Faraday Cage is available in two types of configurations. Cage for mounting to a full perimeter enclosure on series tables.
Faraday CageSetup, 2017 Setup The Faraday Cage is available in two types of configurations. Cage for mounting to a full perimeter enclosure on 63-500 series tables. Cage with a base plate for use on a
More information11/12/2015 CHAPTER 7. Axonometric Drawings (cont.) Axonometric Drawings (cont.) Isometric Projections (cont.) 1) Axonometric Drawings
CHAPTER 7 1) Axonometric Drawings 1) Introduction Isometric & Oblique Projection Axonometric projection is a parallel projection technique used to create a pictorial drawing of an object by rotating the
More informationLIST PRICING. Standard Door Modifications
Standard Modifications 6/8 Slab Only (No Jamb) *deduct from standard door unit price - $120 7/0 and 8/0 Slab Only (No Jamb) *deduct from standard door unit price -$160 Sidelite Panel Only (No Jamb) *deduct
More informationDownloaded from ENGINEERING DRAWING. Time allowed : 3 hours Maximum Marks : 70
ENGINEERING DRAWING Time allowed : 3 hours Maximum Marks : 70 Note : (i) (ii) Attempt all the questions. Use both sides of the drawing sheet, if necessary. (iii) All dimensions are in millimeters. (iv)
More informationTub & Shower. Retail Ready Programs. Designed to Maximize Sales, Turns, Margins and Profit
Retail Ready Programs Designed to Maximize Sales, Turns, Margins and Profit AquaPlumb is the industry leader in tub and shower accessories. From complete bath waste assemblies to special finish trim pieces,
More informationWALL PLATES & SPECIALTIES
& SPECIALTIES SWP26LA Screwless Polycarbonate Wall Plates A F A. Molded of rugged.065" thick polycarbonate. B. Seamless, sleek, super smooth construction provides no dirt-catching channel around plate
More informationCOMPONENTS AND ACCESSORIES FOR FITTING TIPPERS
Hinges for aluminium side boards M 15020 Raw light perforated support M 15010 Zinc-plated light double opening hinge X 40070 Zinc-plated head cap screw 8x20 M 15030 Light raw locking plate M 15620 Zinc-plated
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationEngineering & Computer Graphics Workbook Using SOLIDWORKS
Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationTubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification
4 Tubular Deadbolts 3 4 6 8 17 Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 3 12 14 16 17 Keyed Deadbolt Series KDD Features Ordering String KDD Functions
More informationDoor Ironmongery included within your quotation
Door Ironmongery included within your quotation Configuration Specifications All Ironmongery has been initially quoted with a Satin or Polished Brass finish (unless specified), for further options on Ironmongery
More informationLINEAR AIR GRILLE LF - 202/LF 212 / LF / LF ACCESSORIES
TYPE LF - 202/LF 212 / LF 202-2 / LF 212-2 LINEAR AIR GRILLE ACCESSORIES DESCRIPTION The linear air grilles of LF-202, LF-212 series are suitable for installation on walls, ducts and false ceilings. The
More informationHardware Fitting Accessories Accessories
Door viewer Suitable for door thicknesses (a) 34 52 mm Telescopic version Without flap Angle of vision: 160º Door drilling: 12 mm Suitable for door thicknesses (a) 35 78 mm Telescopic version Without flap
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationWeather Shield Awning and Scena Vu Wood Window Parts Reference Catalog
Weather Shield Awning and Scena Vu Wood Window Parts Reference Catalog #1024040 (03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100 Table of Contents Awning and Scena Vu Wood Window Parts
More informationWall Plates & Specialties
Molded of rugged.065" thick polycarbonate. Seamless, sleek, super smooth construction provides no dirt-catching channel around plate s perimeter. & Specialties An extra 1/8" width and height than standard
More informationMORTISE LOCKS RESIDENTIAL SERIES
MORTISE WITH TRIM MORTISE WITH sectional TRIM AVAILABLE FINISHES C15 SATIN NICKEL C26 POLISHED CHROME C26D SATIN CHROME FEATURES cul listed for use on 3-hour Fire Door (Single or Double Doors) Conforms
More informationcabinet hardware and appliance pulls
SOLID BRASS I HAND FINISHED I AMERICAN MADE LIFETIME GUARANTEED FINISHES I ANTIMICROBIAL I CERTIFIED GREEN cabinet hardware and appliance pulls SANIGUARD Antimicrobial Product Protection Available on Everything
More informationDa Vinci 3-in-1 Stand-up Desk
Da Vinci 3-in-1 Stand-up Desk Price: $1,795.00 Description: da Vinci 3-in-1 QUICK STATS: AVAILABLE WIDTHS: 3'6", 4', 4'6", 5', 5'6", 6', 6'6", and 7''. (Standard DEPTH 29") AVAILABLE HEIGHT: Made to order:
More informationPerfect Points Sampler
Perfect Points Sampler by Ann Johnson for Connecting Threads Perfect Points Sampler: Lesson Five The Perfect Points Sampler was designed to provide practice for the techniques discussed in the Perfect
More information