INSTALLATION INSTRUCTIONS

Size: px

Start display at page:

Download "INSTALLATION INSTRUCTIONS"

Martin Skinner
5 years ago
Views:

1 INSTINCT TM Designed to Inspire STRENGTH TM DUAL ADJUSTABLE PULLEY IL-D2002 INSTALLATION INSTRUCTIONS expect different TM

2 Copyright Star Trac by Core Industries, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written permission from Star Trac. Every effort has been made to keep this information current; however, periodically, changes are made to the information herein, and these changes will be incorporated into new editions of this publication. All product names and logos are trademarks of their respective owners. Printed in the USA. Page 2

REQUIRED TOOLS: INSTALLATION INSTRUCTIONS 5MM HEX KEY SOCKET 1 TORQUE WRENCH 1 GENERAL NOTES: Unless otherwise noted Loctite 242/243 or equivalent thread locker must be used on all threaded fasteners.

3 REQUIRED TOOLS: INSTALLATION INSTRUCTIONS 5MM HEX KEY SOCKET 1 TORQUE WRENCH 1 GENERAL NOTES: Unless otherwise noted Loctite 242/243 or equivalent thread locker must be used on all threaded fasteners. (Do not use thread locker when a Nyloc nut is used.) All Star Trac Strength equipment MUST be secured to the floor using either 10mm or 3/8in. (grade 5 minimum) bolts. To accommodate this there are mounting holes located on every foot. This Installation Instructions Manual must be used in conjunction with the equipment s Owner s Manual. The Owner s manual describes equipment setup and instructs members on how to use it correctly and safely. THREAD LOCKER APPLICATION: Clean all threads and holes, apply no more than 3-4 drops per bolt. Thru Holes Blind Holes Metric Steel Bolts Torque Specifications Bolt Size Thread Pitch Torque, N-m (lbs-ft) 6mm (8-10) 8mm (19-21) 10mm (45-48) 12mm (45-48) Torque all hardware to values as specified above, unless noted otherwise. See Page 9 of this manual for fastener sizing information; for reference only. Note: All torque values are in N-m unless otherwise stated. Should any component not be present or if you have any operational questions, please refer to your owner s manual or on the Specifically refer to your Inspiration serial number and model number labeled on your equipment. PACKAGING REMOVAL: Carefully remove all packaging materials that wrap the equipment. DO NOT USE A KNIFE OR BOX CUTTER AS YOU MAY DAMAGE THE EQUIPMENT. At this time remove any sub-components from the box and set aside for later assembly. Page 3

4 TOWER ASSEMBLY: 1. Stand one of the DAP towers upright and slide the dip bar assembly onto its mounting sleeve. Now slide the other DAP tower into place using the dip bar assembly as a guide. 2. Locate and install the six (M8,25mm,Button Head Bolts) and six (M8,Flat Washers) as shown. Do not tighten bolts at this time. 3. Install the two rear DAP tower supports using sixteen (M8,25mm,Button Head Bolts) and sixteen (M8,Flat Washers). 4. After all bolts are installed use an M5 Hex key socket and torque wrench to tighten all M8 bolts from step one through step three. HAND STRAP AND BODY STRAP INSTALLATION: 1. Hang the hand strap on the under hook. 2. Hang the body strap on the upper hook. Page 4

5 BAR ASSEMBLY INSTALLATION 1. Hang the bar assembly on the upper hook as shown right picture.. Page 5

6 HARDWARE GUIDE WARNING! Before using this product, it is essential to read the ENTIRE operations manual and ALL installation Instructions. The Owner s manual describes equipment setup and instructs members on how to use it correctly and safely. Health related injuries may result from incorrect or excessive use of exercise equipment. Star Trac strongly recommends you to encourage you and your members to discuss their health program or fitness regimen with a health care professional, especially if you or they have not exercised for several years, are over 35, or have known health conditions. Page 6

7 expect different TM STAR TRAC 4400 North East 77 th Ave. STE 300 Vancouver, Washington Telephone: (800) , (714) Fax: (714) Part No ,June 2013

DUAL ADJUSTABLE PULLEY IP-D9302 INSTALLATION INSTRUCTIONS

DUAL ADJUSTABLE PULLEY IP-D9302 INSTALLATION INSTRUCTIONS Copyright 2010. Star Trac by Core Industries, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without