RHEINZINK - Angled Standing Seam
|
|
- Bryce Stone
- 5 years ago
- Views:
Transcription
1 RHEINZINK - Angled Standing Seam Product Overview RHEINZINK - Seam technology A vibrant, elegant structure even for large surfaces. Feasable with tapered surfaces as well as concave and convex rounded surfaces. Prominent optical structuring of the roof surface with a ca. 12 mm seam width. Simple, efficient installation by closing just one seam Rainproof lengthwise connection Use of prefabricated panels or sections Panel lengths up to 16.0 m are possible RHEINZINK - Angled Standing Seam In the realm of sheet metal technology, the angled standing seam is a relatively new development: it has only received mention in technical literature since the beginning of the 20th Century. For roofs with a pitch of at least 25, it constitutes the norm. Compared to the double lock standing seam, seam closure of prefabricated sections is particularly easy, as the finished angled standing seam is created by only seaming one side. The angled standing seam is preferred in visible areas, where the pitch of metal roofing is higher, e.g. parapets, attics and mansard roofs; whether in traditional vertical, diagonal or horizontal application. Although it appears wider than the double standing seam, the angled standing seam still offers prominent vitality and quite a slender effect to the structure of large surfaces. Technology System Description Roof covering from a pitch of 25 Façade cladding Small surface cladding (fascias, attics, etc.) The angled standing seam is used in roof areas with pitches over 25, in façade areas and in cladding small surfaces such as fascias, attics, parapets etc. Its height of ca. 25 mm and seam width of ca.12 mm, allows roof and facade surfaces to be divided in an aesthetically
2 pleasing manner. The angled standing seam is particularly notable for its low material stress. Contrary to the double lock standing seam, only one seam is closed here - either manually or by machine. The angled standing seam is produced using profilers (length 16.0 m), or folding presses (length 6.0 m). Tapered areas as well as concave and convex rounded surfaces can be clad with the angled standing seam. The angled standing seam is used in roof areas with pitches over 25, in façade areas and in cladding small surfaces such as fascias, attics, parapets etc. Its height of ca. 25 mm and seam width of ca.12mm, allows roof and facade surfaces to be divided in an aesthetically pleasing manner. The angled standing seam is particularly notable for its low material stress. Contrary to the double lock standing seam, only one seam is closed here - either manually or by machine. The angled standing seam is produced using profilers (length 16.0 m), or folding presses (length 6.0m). Tapered areas as well as concave and convex rounded surfaces can be clad with the angled standing seam. Section Width / Material Thickness Section widths of mm Material thickness mm / 0.8 mm The section width of ca. 530 mm (coil width 600 mm) is the international standard for angled standing seam roofs, with a material thickness of mm. However, practical building experience indicates that, in exceptional cases, it is necessary to reduce the section width and increase material thickness. This can counteract possible deflections from high winds. Section Lengths Customary section length is up to m In special cases up to m The general standard maximum section length is m. In special cases, section lengths of up to m can be installed. In this case, fastening and connection details of the sections must be adapted to increased length. If the max. possible section length is insufficient, individual lengths may be connected with cross-joints.
3 Fixing Indirect via clips in the seam area Indirect via continuous cleats in the bends at the end of the section or panel Fastening is always indirect: fasteners are attached in the seam area, or seam strips in the edges at section ends (although in some cases, individual fasteners are used there as well). Three kind of fasteners are used: fixed clips, sliding clips and long sliding clips. The number of clips per sqm depends on wind suction forces, fasteners and roof construction. Above and beyond that, section width and material thickness also impact significantly on the number of clips required. Band width/mm Course width/mm* Course width/mm** Metal thickness /mm Wind loads in kn/m² /500 4/500 4/500 4/500 4/500 4/400 6/350 6/350 6/350 6/300 6/250 6/250 7/300 7/300 7/300 7/300 7/250 7/250 8/250 8/250 8/250 9/250 9/200 9/200 8/250 8/250 8/250 9/250 9/200 10/200 10/200 10/200 10/200 10/150 11/200 11/200 11/200 11/150 11/200 11/200 11/200 11/150 13/150 13/150 13/150 13/150 13/150 13/150 13/150 15/150 15/150 15/150 15/150 15/150 15/150 17/100 17/100 17/100 17/100 17/100 17/100
4 Table: minimum number of RHEINZINK clips (per m²)/max. distance between clips (mm) depending on wind loads Note: The dimension of the clip and the distance between the clips is based on an average section length of ca. 3m. * ca. section width when hand finished ** ca. section width when machine finished Fixed Clip Area Roof surface fixed clip area is between 1.0 m and 3.0 m. In order to prevent the sections from slipping, a fixed clip area is allocated on the roof surface, depending on roof pitch. Depending on section length, the portion with the fixed fasteners can be between 1 and 3 m long, but not more than a quarter of the section length. Fasteners Mainly flat headed nails or roofing felt nails. In Europe, flat headed nails, roofing felt nails and/or spiral nails have become accepted fasteners. Fixing RHEINZINK - roofing depends primarily on the type and design of the substructure. Construction requirements must take into account snowfall and wind loads, as well as section width and material thickness, when selecting fasteners. Fixing Media 2 Dimensions each per binding (in mm) Binding metal thickness 0,8mm Quality typ. Base Use in construction (Comments s.b.) Flat headed nail 3,1x25 hot zinc D
5 for Compressed air nailer hot zinc Roofing felt pin 2,8x25 D Patented roof 2,8x25 felt nail A Chipboard screw 4,0x20 DK/D Chipboard screw 4,0x25 DK/D Roofing felt pin, 2,5x25 threaded DK Countersunk 4,5x25 DK wood screw Threaded nail 3,5x30 coated S 829* * Threaded nail 2,4x30 F 791* 787* - hot zinc Felt nail 2,5x25 F The combination was not taken into consideration when measuring. * As expected, the extraction values are higher in 30 mm thick wooden sheathing. 1 Ta/Fi 24 mm wooden sheathng, V13 glass fibre bitumen roof sheeting 2 Ta/Fi 24 mm wooden sheathing 3 Building veneer plywood, waterproof, glued, 19mm, structured underlay Table: medium static extraction values (in Newtons) of standard fasteners for RHEINZINK seamed roofs and façades, depending on the substructure. Cross-Joints Single cross-seam from a roof pitch of 25. To separate excessively long section lengths and for design reasons, cross-joints can be formed. The development of cross-joints depends on roof pitch. Simple cross-seam The simple cross-seam can be used as a cross-joint for roof pitches of 25. The back-fold of the bottom section is hooked into the back-fold of the top section. Care must be taken to ensure that linear expansion due to changes in temperature is not impeded.
RHEINZINK - Double Standing Seam
RHEINZINK - Double Standing Seam Product Overview RHEINZINK - Double Standing Seam Fine seam lines give a slim appearance Harmonises with both traditional and modern architecture Feasible with conical
More informationProfile and design dependent - refer to our technical team length width
Smarttray Roofing Systems Roofing Systems Smart tray 510 standing seam custom panel introduction Due to the nature of the materials used we are able to accomodate most non standard roof designs The design
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationEgger Roofing Board Fast, Easy, Safe: With this board you can reach the top.
Egger Roofing Board Fast, Easy, Safe: With this board you can reach the top. 1 2 Content Content 1 2 Roof Sheathing 4 Importance 4 EGGER Roofing Board 5 Benefits 5 Principles of the EGGER Roofing Board
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Formed roof drainage sheet metal fabrications. 2. Formed low-slope roof sheet metal fabrications. 1.2 SUBMITTALS A. Shop Drawings: Show
More informationROOF FRAMING INFORMATION BATTEN INSTALLATION CORONA SHAKE INSTALLATION ACCESSORY INSTALLATION ESTIMATING DATA GENERAL INFORMATION
ROOF FRAMING INFORMATION BATTEN INSTALLATION CORONA SHAKE INSTALLATION ACCESSORY INSTALLATION ESTIMATING DATA GENERAL INFORMATION ROOF FRAMING INFORMATION It is the responsibility or roofers, building
More information50948-RHN Putney. 06 January This document includes: Aluminium strip/ sheet coverings/ flashings 1. Code Section Revision Dated
50948-RHN Putney 06 January 2018 This document includes: Code Section Revision Dated H72 Aluminium strip/ sheet coverings/ flashings 1 Table of Contents Title H72 Aluminium strip/ sheet coverings/ flashings
More informationShingle Installation Guide
Installation Guide Roof Framing Information Installation Installation Accessory Installation Estimating Data General Information Roof Framing Information It is the responsibility or roofers, building contractors
More informationShingle Installation Guidelines
Shingle Installation Guidelines General Guidelines Materials to be used Key definitions Cost of roofing Preparation of the roofing deck Materials used for roofing should conform to approved norms and regulations
More informationInstallation Guide. Cedar Shake. Distributed by: BEST MATERIALS LLC, Phoenx AZ
RPM ROOFING Installation Guide Cedar Shake Distributed by: BEST MATERIALS LLC, Phoenx AZ 602-272-8128 800-474-7570 www.bestmaterials.com Table of Contents OVERVIEW... 1 CAUTION... 1 DISCLAIMER... 1 PRODUCT
More informationVertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
More informationA Shell construction
A Shell construction A 4/2012 Content 1 BASE AND WALL ANCHORING 1.1 Base with mortar bed 1.2 Base with sill plate 1.3 Base with raised sill plate 1.4 Concrete base (mortar bed) 1.5 Concrete base (sill
More information21 C SHELVING SYSTEMS 21 C Shelving Systems consist of innovative products that provide visually appealing shelving and storage to any area. This syst
21 C SHELVING SYSTEMS 21 C SHELVING SYSTEMS 21 C Shelving Systems consist of innovative products that provide visually appealing shelving and storage to any area. This system is available in two unique
More informationREGAL. Installation Manual
REGAL Installation Manual General Information The details shown on the following pages are suggestions or guidelines for installing the Regal system. The installation details shown here are proven methods
More informationUL 580 Construction No: ½ in Mechanical Lock w/ Clip
Test Type: Testing Authority: Test Name: UL 580 Construction No: 588 Underwriters Laboratories Wind Uplift Test Date: Test Completed By: Testing Laboratory Panel Type: Greg Rezek Underwriters Laboratories
More informationlindab we simplify construction LindabStandingSeamRoofing Application guide
lindab we simplify construction LindabStandingSeamRoofing Application guide This handbook deals with long strip roofing with Lindab PLX on a boarded roof covering. The instructions in this handbook are
More informationUL 580 Construction No: ½ in Snap Lock w/ Clip
Test Type: Testing Authority: Test Name: UL 580 Construction No: 589 Underwriters Laboratories Wind Uplift Test Date: Test Completed By: Testing Laboratory Type: Width: Clip Spacing: Decking Construction:
More informationBasic Fitting Details No. 1
No. 1 Fixing free edges of flashings A. Clips for flashings over interlocking tiles B. Clip to ridge or hip roll C. Clip to apron flashings Clips should be made from quarter hard copper, 0.6mm thick, terne
More information/AT /A A TB BuyLine 0259 BuyLine _ ATB01_08.indd _ ATB01_08.indd 1 10/19/07 5:49:21 AM 10/19/07 5:49:21 AM
07 41 13/ATB 13/ATA BuyLine 0259 A standing seam panel with an integral seam, Dutch Seam allows for uninhibited movement. A clip at the low point of the seam anchors the panel, preventing seam rotation
More informationGIRTS ON BACK OF BUILDING
GIRTS ON BACK OF BUILDING ALL GIRTS ARE 1 1/2 SQUARE TUBE. GIRT LENGTHS FOR 12, 20, 24, AND 30 WIDE BUILDINGS: ON 12 WIDE BUILDINGS GIRTS ARE 67 3/4 LONG ON 20 WIDE BUILDINGS GIRTS ARE 56 3/4 LONG ON 24
More informationE-Z BUILD SHED BUILDING GUIDE 10' 10' 10' 12' 10' 14' 10' 16' 10' 20'
E-Z BUILD SHED BUILDING GUIDE 12' 14' 16' 20' North American softwood dimensional lumber sizes: NOMINAL in in 1 4 1 6 2 4 2 6 ACTUAL in in ¾ 3½ ¾ 5½ 1½ 3½ 1½ 5½ Shown with rollup door Construct your own
More informationCertainTeed. Shake / Slate Installation Guide
CertainTeed Shake / Slate Installation Guide Table of Contents System Components... 2 General Conditions, Safety and Roof Preparations... 3... 4 Eave/Drip Edge... 5 Inner Gable... 6 Outer Gable... 7 Open
More informationCFDTT-01. Control Joint Study (General)
Trim Method Classic Method Notes: Control joints are required and should be located by the designer at the following locations on the construction documents: 144 sf (13.4 sm) is the maximum overall area
More informationInstallation Guidelines
Installation Guidelines Tando Building Products provides these instructions as general guidelines only. Tando Building Products neither installs exterior cladding nor has any control over any installation.
More informationInstallation Manual. Future Roof Shingle / Slate Products
Installation Manual Future Roof Shingle / Slate Products REVISED 14/09/2010 Future Roof Shingle Installation Manual is a component of Future Roof, Inc. and as such is intended to be used with Future Roof
More informationUL Construction No. 254
UL Construction No. Wind-Uplift - Class 90 (See Item No. ) / Fire Not Investigated Metal Roof Deck Panels* Snap-Clad No. MSG or No. MSG min. thickness coated steel panels. Panels in. wide max., 0 in. wide
More informationBest Buy Metals Toll Free / Phone / Fax
DETAIL MANUAL for Vertical Seam Best Buy Metals Toll Free 1-800-728-4010 / Phone 423-479-6382 / Fax 423-728-3066 www.bestbuymetals.com Vertical Seam Roofing Panels Fig. 2 Vertical Seam Has 1-3/4" high
More information8000 SERIES SLIDER - 2 LITE (DUAL SLIDE) (ELEVATION DRAWING)
- 2 LITE (DUAL SLIDE) (ELEVATION DRAWING) HEAD (MEETING RAIL) NOTE: ELEVATION VIEWED FROM THE OUTSIDE LOOKING IN. ELEVATION DRAWING 3" = 1' - 0" SL1.1 - 3 LITE (END VENT) (ELEVATION DRAWING) HEAD 3 LITE
More informationInstallation Guidelines
Installation Guidelines Exteria Building Products provides these instructions as general guidelines only. Exteria Building Products neither installs siding nor has any control over any installation. The
More informationPolytegola N. Bitumen Roof shingles. Application guide
Polytegola N Bitumen Roof shingles Application guide Application manual POLYTEGOLA N CONTENT 1. Foreword - General conditions 3 2. POLYTEGOLA N designs 4 3. Roof pitches 5 4. Storage 5 5. Roof decking
More informationSHEET METAL FLASHING AND TRIM Christ on the Mountain
SECTION 076200 - SHEET METAL FLASHING AND TRIM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Compatibly with the bumping of flashings and trim as identified in the Membrane Roofing Section 075000.
More informationInspire Aledora Slate Application Guidelines
July 2014 Inspire Aledora Slate Application Guidelines Only Basic Roofing Tools Required Hand fastened or fastened with a pneumatic nail gun Utility knife or a standard circular saw Tape measure, pry bar,
More informationWith Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e Download 12,000 More Shed Plans
With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e Download 12,000 More Shed Plans Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,
More informationInstallation Instructions
Installation Instructions Roof edge trim profile Series TAG multi-piece aluminium profile Front face height: 250-1050 mm supplied with patented 4F brackets as standard height-adjustable, horizontally moveable,
More informationE-Z BUILD STEEL BARN 12' 12' 12' 16' 12' 20'
E-Z BUILD STEEL BARN 12' 12' 12' 16' 12' 20' BUILD You can construct your own E-Z frame barn with the help of this step by step guide. North American softwood dimensional lumber sizes: Nominal Actual in
More informationDIVISION 6 WOOD AND PLASTICS
DIVISION 6 WOOD AND PLASTICS PART 1 - GENERAL 1.01 SUMMARY A. This Section includes the following: 1. Wood framing. 2. Wood supports. 3. Wood blocking. 4. Wood cants. 5. Wood nailers. 6. Wood furring.
More informationICC-ES Evaluation Report Reissued June 1, 2010 This report is subject to re-examination in one year.
ICC-ES Evaluation Report ESR-2648 Reissued June 1, 2010 This report is subject to re-examination in one year. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council
More informationOHearneAssociates.com
OHearne Associates: Architecture - Site - Planning P. O. Box 598, Harrisville, RI 02830 401-710-7788 Fax: 710-7848 OHearneAssociates.com www.youtube.com/user/johearne North Smithfield Town Hall 1 Main
More informationGLOSSARY. A useful collection of definitions for commonly used terms in tile roofing.
A useful collection of definitions for commonly used terms in tile roofing. Abutment Where the roof tiles meet a structure rising above the roof. Accessory A concrete or terracotta product used to finish
More informationEXAMPLE 1-4 EXAMPLE 1-5
EXAMPLE 1- Calculate the maximum shear stress τmax in a simply supported wood beam carrying a uniform load of (w=18 kn/m) if the length is 1.75 m and the cross section is rectangular with width 150 mm
More informationUNA-CLAD Metal Roof Systems
UNA-CLAD Metal Roof Systems Underwriters Laboratories (UL) UL Roof Deck Constructions and P Assemblies Factory Mutual Approvals (FM) Table of Contents 1.01 EXTERNAL FIRE RATINGS... 7 Assemblies are updated.
More informationRoof Only Lean-to Instruction Manual
Roof Only Lean-to Instruction Manual for 10 x 20 2 x 8 /10 6 covers Our unique assembly process quickly transforms the individual pieces into a finished structure that will give you a lifetime of service.
More informationLedger Board Lean-to Instruction Manual
Ledger Board Lean-to Instruction Manual for 18 x 24 2 x 8 covers Our unique assembly process quickly transforms the individual pieces into a finished structure that will give you a lifetime of service.
More informationINSTALLATION INSTRUCTIONS TRI-ROOF. energy for a better world
energy for a better world INSTALLATION INSTRUCTIONS TRI-ROOF The flexible roof integration system Compatible for framed module types* Simple exchange of modules Replaces existing roofing Special profiles
More informationLUX INSTALLATION GUIDE. LUX Panel V Groove Installation. Installation Guide. February
LUX Panel V Groove Installation Installation Guide February 2017 www.luxpanel.ca LUX Panel V Groove Installation LUX panel steel cladding is designed to be installed vertically, horizontally, diagonally
More informationSlate Shingle Specifications
Slate Shingle Specifications California Slate is a proud member of the Slate Roofing Contractors Association of North America, Inc. (SRCA) which publishes Section 07310 Slate Shingles setting forth architectural
More informationBrava Old World Slate Installation Guide
Brava Old World Slate Installation Guide Brava Roof Tile Phone: 844-290-4196 www.bravarooftile.com This document includes the recommended and suggested installation procedures for Brava Old World Slate
More informationPULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE
BUILD Stock Item 12229 Drawer s, 2 1 2" x 48" 63420 Baltic Birch Ply, 1/4" x 24" x 30" 38742 Maple, 3/4" x 3" x 24" 45953 100# Zinc Over-Travel Drawer Slides - Centerline 757-20" 30254 #8 x 1 1 4" Square
More informationInstallation. Openings: Valley: Installation on timber roofs (new buildings) 1. Fit a support (noggins) around the opening.
Installation Openings: 1. Fit a support (noggins) around the opening. 2. Apply Isola Sealant to the support and then fit Pro Super. 3. Install an Isola Opening Fitting for round or square openings. (Remember
More informationFive Star Panel Installation Instructions
Five Star Panel Installation Instructions How to Store Five Star Panels You will need to store FIVE STAR PANELS in dry place to prevent staining, deterioration and possibly void all warranties. Stand the
More informationSUPER-UNDERLAY SHEET
SUPER-UNDERLAY SHEET SBS modified bitumen underlay sheet Producer: KATEPAL OY P.O.Box 33 FI-37501 LEMPÄÄLÄ FINLAND Telephone +358 3 375 9111 Telefax +358 3 375 0974 E-mail: katepal@katepal.fi www.katepal.fi
More informationTECHNICAL BULLETIN. 7/2017 CertainTeed Corporation
TECHNICAL BULLETIN CEDAR IMPRESSIONS INDIVIDUAL 5 SAWMILL SHINGLE FLARE INSTALLATION INSTRUCTIONS (STANDARD WALL, TURRET WALL, OUTSIDE CORNER 90⁰;BAY/BOW) Cedar Impressions Individual 5 Sawmill Shingles
More informationInstallation Guide. Step 3. Valley Flashing. Step 7. Transition Flashings and Accessories. Step 6. Hip and Ridge Installation
Step 7. Transition s and Accessories Step 3. Valley Step 6. Hip and Ridge Installation Step 2. Rake Trim Step 5. Installing the Shingles Step 1. Eave Starter Installation Step 4. Endwall s Installation
More informationEkoroof LiteTile Dimensions
Ekoroof LiteTile Dimensions 7 3 3.5 Height 40 Width 20 Length Weight per Panel: 3 kg / 6.61 lbs 2 2 Area per panel 800 in / 5.55 ft 2 Panels per Square: 20 (including overlap, for a 100 ft covered area)
More informationRIDGEMASTER PLUS CAUTION INSTALLATION INSTRUCTIONS ALWAYS WEAR SAFETY GLASSES TOOLS NEEDED GENERAL GUIDELINES FOR RIDGEMASTER PLUS AND HIPMASTER
INSTALLATION INSTRUCTIONS RIDGEMASTER PLUS CAUTION Before beginning installation read all general guidelines, special notes and installation steps thoroughly and be sure to check and follow all your local
More informationBase : (1 - batten spacing, 2 - bottom row batten spacing, 3 - ECOTILE, 4 - batten, 5 - rafter, 6 - fixing method)
ECOTILE is an interlocking stamp tile with side cuts and 2 pins. Dimensions 405 x 318 mm Groove Depth 5 mm Pins Height 15 mm Coverage 10 tiles per m² Weight 23, 4 Kg per m² Method for fitting the ECOTILE
More informationDETAIL MANUAL for Standing Seam / Image II
DETAIL MANUAL for Standing Seam / Image II Best Buy Metals Toll Free 1-800-728-4010 / Phone 423-479-6382 / Fax 423-728-3066 www.bestbuymetals.com Best Buy Metals Standing Seam Roofing Panels Fig. 2 Standing
More informationCROS S L A MINAT ED TIMBER S TRUCTURES
M a d e f o r b u i l d i n g b u i l t f o r l i v i n g COMP onent CATA LO GUE FOR CROS S L A MINAT ED TIMBER S TRUCTURES I M P R I N T KLH Massivholz GmbH Publisher and responsible for the content:
More informationInstallation Instructions for Icopal Guttering System.
Installation Instructions for Icopal Guttering System. Cutting & Handling (1) Where it is necessary to cut or trim the components of the rainwater system tin snips or hacksaws should be used, the use of
More informationInstallation Instructions Split Shake, Staggered Shake, Shingle, Perfection Shingle, and Shapes
Installation Instructions Split Shake, Staggered Shake, Shingle, Perfection Shingle, and Shapes General Guidelines These instructions show one type of installation and are intended for the professional
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationInstallation Guidelines
Installation Guidelines Exteria Building Products provides these instructions as general guidelines only. Exteria Building Products neither installs siding nor has any control over any installation. The
More informationArchitectural Interior Wall Paneling
Architectural Interior Wall Paneling Compact Laminate Arpa Compact Laminate is comprised of reinforced wood fibres and thermosetting resins which when manufactured under very high pressure and heat produce
More informationb) Symphony comes pre-packaged in color and width blends. There is no need to mix Symphony at the job site. Currently Symphony is available in the
PART 1 GENERAL 1) DESCRIPTION a) CertainTeed Symphony TM composite slate is an innovative roofing product that simulates the appearance, texture, and contours of traditional natural slate. It is a carefully
More informationCOMPOSITE SIDING INSTALLATION GUIDE
CENTURY HOME LIVING COMPOSITE SIDING INSTALLATION GUIDE Read all instructions prior to installing any siding product. Failure to install and finish this product in accordance with all local building codes,
More informationStandard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit 1
Designation: D 4756 03 An American National Standard Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit 1 This standard is issued under the fixed designation D 4756;
More informationAQUAGARD EPDM FLAT ROOFING SYSTEMS INSTALLATION GUIDE THE MECHANICALLY FIXED SYSTEM
AQUAGARD EPDM FLAT ROOFING SYSTEMS INSTALLATION GUIDE THE MECHANICALLY FIXED SYSTEM The following guide covers the technique for the Mechanically Fixed System. This system is best employed when an overlay
More informationNEXUS SERIES CABINETS
NEXUS SERIES CABINETS STANDARD BASE ASSEMBLY INSTRUCTIONS Also applies to: Galaxy Series, Nexus Series, Ridgeline Series, Statesman Series, and Waterford Series FOR YOUR INFORMATION: These assembly instructions
More informationinstallation guide Villa
installation guide Villa Table of Contents Introduction............................. 2 Safety................................... 2 Tools.................................... 2 Codes & Requirements....................
More informationInstallation instructions. Novotegra for Corrugated Fibre Cement / Sandwich Roofs
Installation instructions Novotegra for Corrugated Fibre Cement / Sandwich Roofs I CONTENTS 1 General information... 0 2 Novotegra: mounting system planning... 1 2.1 Solar-Planit software... 1 2.1.1 General
More information-ARBOREAL. Skanfas Ltd Rikkilän/e 993 FIN Simola
Skanfas Ltd Rikkilän/e 993 FIN-54330 Simola www.skanfas.com Installation Instructions Skanfas is a fire-proof, weather-proof and non-decaying facade material. It is a combination of the pleasant look of
More informationThe Influence of Nails and Plasterboard on the Racking Resistance of Stud Walls
Building 1 Grosvenor Court, Hipley Street OLD WOKING, SURREY GU22 9LL Tel: +44 (0) 1483 769518 Fax: +44 (0) 1483 770863 E-mail: design@silvatecdesigncom Internet: wwwsilvatecdesigncom The Influence of
More informationInstallation Guide. Titan Old World Slate REV Titan Manufacturing Phone: (407) Fax: (866)
Installation Guide Titan Old World Slate REV70908 Titan Manufacturing Phone: (407) 587-5492 Fax: (866) 741-2147 www.titanroofsystems.com This document includes the recommended and suggested installation
More informationBalConIEs.
BalConIEs Installation guidelines for balustrade cladding The following regulations and provisions must be observed when preparing and installing balustrade cladding using Trespa Meteon sheets: 防 The applicable
More informationUlltraclad Aluminium Cladding. Contents. 1.0 General Information Design Information Installation Information 7. 4.
Ulltraclad Aluminium Cladding Contents 1.0 General Information 2 2.0 Design Information 4 3.0 Installation Information 7 4.0 Maintenance 10 5.0 Health & Safety 10 1 1.0 General Information 1.1 Introduction
More informationProduction Technology woodtec Fankhauser GmbH Timber Frame + swiss quality Construction Table The Modular System for Timber Frames
woodtec Fankhauser GmbH Production Technology For Timber Frame Timber Frame + swiss quality Construction Table The Modular System for Timber Frames 2 woodtec Fankhauser The modules are only mechanically
More informationInstallation instructions for co-extruded louver-board profiles
Installation instructions for co-extruded louver-board profiles www.silvadec.com / info@silvadec.com / tel.:+33 (0)2.97.45.09.00 TO BE READ CAREFULLY BEFORE INSTALLATION Before starting installation on
More informationRecommended Slating Tools
Recommended Slating Tools Product Size L Sketch of Article No. Description 60-070 Scriber 60-00 Slater s Hammer 60-00 Slater Ripper 60-080 Parallel Shears 60-0 Slate Cutter Kwiksnip Slate Guuillotine Slate
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More informationChapter 22. Shed Construction
Chapter 22. Shed Construction 22.1 BUILDING SHED FLOOR 22.2 BUILDING SHED WALLS 22.3 BUILDING SHED ROOF 22.4 ASSEMBLING SHED Tools needed by volunteers: Hammer Nail apron Tape measure Square Utility knife
More informationC e r t a i n T e e d S h i n g l e A p p l i c a t o r s M a n u a l. and Carriage House STEEP. Slope Application. (over 21/12)
C e r t a i n T e e d S h i n g l e A p p l i c a t o r s M a n u a l Grand Manor 16 and Carriage House YOUR OBJECTIVE: To learn the correct method of installing each of these roofing products. These shingles
More informationProduct catalogue 2018/19
Product catalogue 2018/1 Solar mounting components Table of contents Roof hooks Page 2 Fasteners for trapezoidal and corrugated roofing Page Clamps Page 13 Profiles Page 14 Connecting elements Page 17
More informationInspire Slate Starter Piece Hip and Ridge. 13 1/2" Height: 13 ½" Width: 12" Squares/ Pallet. Bundles/ Square
December 2017 Classic Slate Application Guidelines Only Basic Roofing Tools Required Hand fastened or fastened with a pneumatic nail gun Utility knife or a standard circular saw Tape measure, pry bar,
More informationXL JOINERY LTD LA PORTE VISTA MODULAR 3 ASSEMBLY INSTRUCTIONS
XL JOINERY LTD LA PORTE VISTA MODULAR 3 2090mm High x 4687mm Wide ASSEMBLY INSTRUCTIONS READ AND UNDERSTAND THESE INSTRUCTIONS FULLY PRIOR TO STARTING INSTALLATION. IT IS STRONGLY RECOMMENDED THAT A COMPETENT
More information9 X 12 REMOVABLE TYPE ALUMINUM WINDOW BARS INSTALLATION INSTRUCTIONS Import Note : 9 X 12 Spacing Removable Type Installation is covered in this
Import Note : 9 X 12 Spacing Removable Type Installation is covered in this Instruction. Removable Bars Only Mount in Recess Position ( Between Window Jamb/ Frame ) The horizontal bars spacing are 12 The
More informationSANERI 3 º. Self-adhesive SBS-elastomer bitumen cap sheet
SANERI 3 º Self-adhesive SBS-elastomer bitumen cap sheet 0809 www.katepal.fi 06 EN 13707 Producer: KATEPAL OY P. O. Box 33 FI-37501 LEMPÄÄLÄ FINLAND Tel. +358 (0)3 375 9111 Fax +358 (0)3 375 0974 E-mail:
More informationBARDOLINE INSTALLATION INSTRUCTIONS
BARDOLINE INSTALLATION INSTRUCTIONS www.onduline.com CONTENTS General conditions Material requirements Terms Estimating shingle requirements Roof preparation Shingle application 9 GENERAL CONDITIONS ONDULINE
More informationEDM + FS, VS, VSE, GGL, GPL ENGLISH:: EDL Deck Mounted Skylight and Roof Window Flashing Installation Instructions VAS
EDM + FS, VS, VSE, GGL, GPL ENGLISH:: EDL Deck Mounted Skylight and Roof Window Flashing Installation Instructions 14-85 VAS 452232-0909 2 ENGLISH: Index Pages 2-3 Pages 4-5 Page 6 Important installation
More informationTable of Contents Light Gauge Metal Roof & Wall Panels
Table of Contents Light Gauge Metal Roof & Wall Panels Installation Guide for Delta Rib, Nor-Clad, Strata Rib & 2-1/2 Corrugated Introduction Important Notice Notes: April 2008 Minimum Recommended Tools
More informationScratch Build a Water Tower
Here s some Prototype details Photos Courtesy of Rodney Doster Water Spout and Discharge Pipe Tank Bands Here s some more Prototype details Photos Courtesy of Rodney Doster Weather Vane as a Finial Using
More informationLedger Board Lean-to Instruction Manual
Ledger Board Lean-to Instruction Manual for 18 x 24 2 x 8 /12 6 covers ROOF ONLY ROOF WITH GABLES 2-SIDED FRAME ONLY 2-SIDED WITH GABLES Our unique assembly process quickly transforms the individual pieces
More informationTable of Contents. Installation Guide for Profile with Hidden Fasteners 3. Installation Steps 4, 5. Prestige Series Moldings 6, 7. Other Accessories 8
1 Table of Contents Page(s) Installation Guide for Profile with Hidden Fasteners 3 Installation Steps 4, 5 Prestige Series Moldings 6, 7 Other Accessories 8 Trims & Accessories 9 Eave Starters 10 Gableboards
More informationTurada Hardwood Shingles and Shakes Installation instructions
1. General 1.1 Maximum Exposure: Maximum exposure for wood shingles and shakes shall comply with Table 1 herein, unless specifically specified in the roof assemblies Product Approval. 1.2 Solid and Spaced
More information8' x 22' Cash Hut INSTALLATION INSTRUCTIONS
PARTS IST J I G A A J I C F D E B B K H A A K H G A Posts w/ Feet (4pcs) J eft End Panels (Front & Back) [4'3"x7'8"] (2pcs) B 22' Peak Trusses (2pcs) K Right End Panels (Front & Back) C 8' Centre Truss
More informationBUILDING THE BASIC SHED. Step A: Build the Foundation & Floor Frame
BUILDING THE BASIC SHED Step A: Build the Foundation & Floor Frame 1. Excavate the building site and add a 4" layer of compactible gravel. If desired, add an extension to the base for the optional wood
More informationInstallation Guide (888)
BamDeck Installation Guide (888) 788-2254 The Collection Decking Systems BAMDECK 3G 5-7/16 Wide Plank Dims: 96 L x 5-7/16 W x 13/16 H BAMDECK 3G 16FT. 5-7/16 Wide Plank Dims: 192 L x 5-1/2 W x 13/16 H
More information9 X 9 REMOVABLE TYPE ALUMINUM WINDOW BARS INSTALLATION INSTRUCTIONS Import Note : 9 X 9 Spacing Removable Type Installation is covered in this
Import Note : 9 X 9 Spacing Removable Type Installation is covered in this Instruction. Removable Bars Only Mount in Recess Position ( Between Window Jamb/ Frame ) The spacing between horizontal bars is
More informationUnit 9. Wall and Ceiling Framing
Unit 9 Wall and Ceiling Framing Wall construction Wall framing includes the assembly of horizontal and vertical members that make up exterior walls and interior partitions. Theses walls support the ceilings
More informationWOODEN BUILDINGS 6.1 INTRODUCTION 6.2 TYPICAL DAMAGE AND FAILURE OF WOODEN BUILDINGS. Chapter 6
Chapter 6 WOODEN BUILDINGS 6.1 INTRODUCTION Wood has higher strength per unit weight and is, therefore, very suitable for earthquake resistant construction. But heavy cladding walls could impose high lateral
More informationProSnap 100 STANDARD DETAILS
ProSnap 100 OVER WOOD DECK STANDARD DETAILS Austin - Headquarters/Sales Office 830 Sagebrush Drive Austin, TX 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499 www.ctmrs.com email: info@ctmrs.com
More information