SkillsUSA California COMPETITION CHAIRMEN: SCOPE OF THE COMPETITION: Please refer to the SkillsUSA Championships Technical Standards.
|
|
- Stuart Park
- 5 years ago
- Views:
Transcription
1 SkillsUSA California COMPETITION CHAIRMEN: SCOPE OF THE COMPETITION: Please refer to the SkillsUSA Championships Technical Standards. JUDGING CRITERIA: Please refer to SkillsUSA Championships Technical Standards. CONTESTANT REQUIRED TOOLS: Work boots Safety glasses or goggles Pencils (sharpened) Brick Trowel 18 x 24 Framing Square Brick Hammer S-Jointer or Barrel Jointer Mason Brush Two 6 Folding Rules (1 Modular, 1 Brick Spacing) Tape Measure (plus extra) Brick Set Chisel Block Set Chisel ¼ or 3/8 Tuck Pointer 24 Level 48 Level Two Line Twigs Utility Knife Torpedo Level Two Wooden Line Blocks Masons Line *Mortar Board and Stand (provided by Organizers) SAFETY REQUIREMENTS: - Safety Form for Tools and Materials: Both the instructor and the contestant certify by agreeing to enter this contest that the contestant has received instructions and has satisfactorily passed an examination on the safe use of a portable power saw. They also certify that the contestant s saw has been thoroughly inspected and is in safe working condition. Further they agree that SkillsUSA Inc., the SkillsUSA Championships technical committee and national judges are released from all responsibility relating to personal injuries resulting from its use. Contestants will be removed from competition if proper training has not been provided and/or they are using the equipment in an unsafe manner. - Safety Statement: Each contestant is responsible for bringing the proper PPE to wear while participation in the contest. Safety glasses, hard hat, hearing protection, work boots and appropriate dress must be worn at all times when in the competition area. Each contestant must turn in a signed SkillsUSA Safety Form to the competition chairman on the day of the competition.
2 Safety Form for Tools and Materials SkillsUSA California - Masonry Competition The SkillsUSA California Masonry Competition will involve the use of equipment and materials in completing the task within the competition. It is absolutely necessary that complete operating instructions and safety for the use of equipment and materials have been given to the contestant in their training program in the local school division as stated in the National SkillsUSA National Standards before he competes. This includes the proper safety instruction in the use of the tools listed in the scope of the contest and the use of protective equipment while using the tools and materials. Safety glasses are required. By the affixing of my signature below, I certify that my student, who is entering the Masonry Competition, has had proper operating and safety instruction in the use of the power tools, equipment and materials. (Signature of Instructor/Advisor) (SkillsUSA California Chapter) By the affixing of my signature below, I certify that I have used the power tools, equipment and materials to be used in the Masonry Competition and that I understand the correct operating procedures and safety precautions for the use of this power tool, equipment and materials. (Signature of Student) (Date) THIS FORM MUST BE SIGNED AND TURNED IN TO THE COMPETITION CHAIRMAN ON THE DAY OF THE COMPETITION. FAILURE TO TURN IN THIS FORM WILL RESULT IN THE STUDENT NOT BEING ALLOWED TO COMPETE.
3 SKILLS California Hand/ Power Tool Contest Pre-use Inspection Form Some portable power tools require a more thorough inspection. Check the manufacturer s recommendation for more advanced power tools. Before using hand tools inspect for the following: The outside of the tool is free of grease, oil and accumulated foreign matter The tool has no visible cracks in jaws or handle Blades or bits are not damaged, cracked, etc. Handles are not cracked, damaged or loose from heads of hammers, axes mauls and other similar tools Tips of screwdrivers, chisels or other similar tools show no excessive wear Gripping surfaces pliers, wrenches or other similar tools are not worn Tools such as chisels and punches do not have mushroomed heads Cutting tools such as chisels and axes are sharp Tool appears to be in generally good condition Before using portable power tools inspect for the following: The outside of the tool is free of grease, oil and accumulated foreign matter Tool power-source shows no damage (cord, airline, battery, etc.) Tool is double insulated and tool housing is not damaged If not double insulated the equipped, electrical cord third prong (ground) is intact All shields, guards or attachments required by OSHA or manufacturer are present Rotating or moving parts of tool are guarded to prevent physical contact Tool is not leaking fluid such as grease, oil etc. Blades or bits are not damaged, cracked, etc. Tool appears to be in generally good condition Proper PPE is available
4 SKILLS California Hand/ Power Tool Contest Pre-use Inspection Form Contestants #: Contestants Signature: Advisors Name: Advisor s Signature: INSTRUCTIONS: 1. The contestant will use this form to document the use inspection of each power and hand tool that will be used for the SKILLS Regional and State building trades competitions. 2. Each hand and power tool must be inspected prior to competition using the stated inspection criteria above or owner s manuals. All tools muse receive a pass (P), improvement needed (I), Fail (F) marking. All tools must receive a passing marking to be used in the competition. All marking and measuring tools will receive an NA. 3. Any corrective steps taken must be noted in the notes section next to the item. a. Examples of corrective actions include: cleaning, repairs needed, removed, tagged out of service. 4. Contestant s advisors must also print and sign they have reviewed the tools prior to competition. 5. Forms will be collected at the beginning of the competition. a. Any contestant/ team that does not submit form will be required to complete inspection prior to start of competition. 6. All contestants will be subject to random tool safety inspections throughout the competition. P Pass I Improvement Needed F Fail Inspection NA Not Applicable Item P I F NA Notes for corrective measures
5
SkillsUSA California Carpentry 2019 Regional Competition SCOPE OF THE COMPETITION:
SkillsUSA California Carpentry 2019 Regional Competition SCOPE OF THE COMPETITION: - Knowledge Performance The contest will include a written test that assesses the knowledge of carpentry including but
More informationJUDGING CRITERIA: Please refer to SkillsUSA Championships Technical Standards.
SkillsUSA California 2019 Regional Plumbing Competition SCOPE OF THE COMPETITION: - Knowledge Performance The contest criteria were drawn from the CTE Curriculum Standards for the Building Trades. The
More informationWoodyWood Inc. Hand and Power Tools Pre-use Inspection Checklist. conducted for. Location Ambada Rd, Ambada, Madhya Pradesh , India
Hand and Power Tools Pre-use Inspection Checklist conducted for WoodyWood Inc. Location Ambada Rd, Ambada, Madhya Pradesh 480334, India Conducted on 18 May 2018 06:34 AM Prepared by Andy Singh Completed
More informationSkillsUSA Wisconsin CABINETMAKING
SkillsUSA Wisconsin CABINETMAKING The following rules are for the Wisconsin state contest only. Students/Teams that qualify for the national contest need to adhere to the rules and guidelines for that
More informationCABINETMAKING. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with cabinetmaking or millwork as the occupational objective.
CABINETMAKING PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of cabinetmaking and millwork. GENERAL
More informationCABINETMAKING. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with cabinetmaking or millwork as the occupational objective.
The following rules are for the state contest only. Students/Teams that qualify for the national contest need to adhere to the rules and guidelines for that national contest. The rules can be found in
More information2018 MICHIGAN SKILLSUSA CHAMPIONSHIPS TASK & MATERIALS LIST SKILL OR LEADERSHIP AREA:
2018 MICHIGAN SKILLSUSA CHAMPIONSHIPS TASK & MATERIALS LIST SKILL OR LEADERSHIP AREA: CARPENTRY CONTEST LOCATION: DeVos Place 303 Monroe Ave NW Grand Rapids, MI 49503 616.742.6500 http://devosplace.org/
More informationHealth & Safety Policy and Procedures Manual SECTION 5 HAND AND POWER TOOLS
SECTION 5 HAND AND POWER TOOLS 1. POWER TOOLS A. References: 29 CFR 1926 Sub Part I (300-307) B. Employees using hand and power tools and exposed to the hazard of falling, flying, abrasive, and splashing
More informationTools for Plumbing. Introduction
2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a
More informationTools Hand and Power. OSHA Office of Training and Education 1
Tools Hand and Power 1 Hazards Workers using hand and power tools may be exposed to these hazards: objects that fall, fly, are abrasive, or splash harmful dusts, fumes, mists, vapors, and gases frayed
More informationCHAPTER HAND TOOLS HAND TOOLS SAFETY Lesson - 4 pages. Hand Tools
CHAPTER HAND TOOLS HAND TOOLS SAFETY Lesson - 4 pages Hand Tools Learning Objectives HAND TOOLS SAFETY After completing this station, participants should be able to: 1. Identify an unsafe tool. 2. Understand
More informationNew Mexico Welding Fabrication 2018 Purpose:
New Mexico Welding Fabrication 2018 Purpose: The purpose of the Welding Fabrication contest is to evaluate each contestant s preparation for employment and to recognize outstanding contestants for excellence
More informationSAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees.
SAFETY DIRECTIVE Title: Hand and Power Tools Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action: New 1.0 PURPOSE This
More informationUTAH S 2016 WELDING FABRICATION COMPETITION
1 UTAH S 2016 WELDING FABRICATION COMPETITION 2 Contents PROJECT... Error! Bookmark not defined. Team Project Outcomes:... 3 Teams Deliverables:... 3 ESSAY AND DRAWINGS... 3 GENERAL RULES... 4 ORIENTATION...
More informationHAND AND POWER TOOLS
USA office: 511 Avenue of America s, # 601, New York, NY 10011 Canada office: 655-32 nd Avenue, Suite 201, Lachine, QC., Canada, H8T 3G6 tel.: 514 634 3434 - fax: 514 634 9736 All PFI Standards and Best
More informationContents. Before you begin. Introduction: Using construction tools and equipment 1. Element 1: Planning and preparing 3
Contents Contents Before you begin v Introduction: Using construction tools and equipment 1 Element 1: Planning and preparing 3 Section 1.1: Obtaining, confirming and applying work instructions 4 and operational
More informationLOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR INDUSTRIAL EDUCATION CONSTRUCTION
LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SCHOOL: AREA: SAFETY TEST FOR INDUSTRIAL EDUCATION CONSTRUCTION Name of Student: Date: Address: Phone: Date Enrolled: Date of
More informationBand Saw Operation & Safety
Band Saw Operation & Safety 2. Three teeth for thickness of material is a good rule to follow when cutting material. Any less and the band saw teeth can be broken off. 3. Read chart on front of band saw
More informationLos Angeles Unified School District Division of Adult and Career Education LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION
LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SCHOOL: AREA: SAFETY TEST FOR INDUSTRIAL EDUCATION AUTO MECHANICS Name of Student: Date: Address: Phone: Date Enrolled: Date of
More informationGeneral Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must
General Safety All power tools can be dangerous if both general and tool specific safety instructions are not followed carefully. General safety instructions apply to all power tools, both corded and cordless.
More informationROTARY HAMMER OWNER'S MANUAL
ROTARY HAMMER OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
More informationFirefighter Firefighter Chapter 2: Firefighter Safety & Health 2.10 Safety with Tools and Equipment and Safety In Training - Part 1
Firefighter Firefighter Chapter 2: Firefighter Safety & Health 2.10 Safety with Tools and Equipment and Safety In Training - Part 1 ICan2Ed, Inc. A firefighter should always follow safety procedures when
More informationChapter 8 Workshops and Maintenance
Chapter 8 Workshops and Maintenance General 1. Eye protection shall be worn at all times when operating power equipment and tools. 2. Report all equipment defects immediately. Do not use unsafe equipment
More informationTool ID. Team Score Format: A team shall be comprised of 4 members. The top 3 team members scores will count toward the final team score.
Tool ID Purpose: To develop the student s ability to correctly identify the names and uses of a variety of tools commonly used in the agricultural industry. Team Score Format: A team shall be comprised
More informationWelding Lab Safety Test
Welcome to the Welding Certification Center Welding Program. Thank you for your interest and your enrollment. In order to ensure your safety and the safety of your fellow students, we have prepared this
More informationLOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR AUTO MECHANICS PROGRAM
LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR AUTO MECHANICS PROGRAM School: Industry Sector: Transportation Class: Date: Teacher: Room: (Please Print) Your
More informationBENCH GRINDER OWNER S MANUAL
BENCH GRINDER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationSHOP SAFETY AND TRAINING IN ACADEMIC DEPARTMENTS
Page 1 of 6 SHOP AND TRAINING IN ACADEMIC DEPARTMENTS 1. All students and employees (staff and faculty) are required to complete documented safety training prior to using any machines or power tools in
More informationImpact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Impact Wrench MODEL TW000 00605 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationSAFETY INSTRUCTION TEST
SCHOOL: AREA: SAFETY INSTRUCTION TEST INDUSTRIAL EDUCATION - ELECTRONICS ADULT SCHOOL Name of student: Date: Address: Phone: In case of accident, notify: Address: Phone: Date Date of Enrolled: Birth: Age:
More informationSTRIKING TOOLS (Users and bystanders - always wear safety goggles when using striking tools) Basic Safety Rules that Apply to the use of Hammers
STRIKING TOOLS (Users and bystanders - always wear safety goggles when using striking tools) Hammers and other striking tools are perhaps the most widely used, and probably the most often abused of all
More informationImpact Wrench. 19 mm (3/4 ) MODEL 6906
Impact Wrench 9 mm (3/4 ) MODEL 6906 002290 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationREEL BLADE / BED KNIFE ADJUSTING & SHARPENING
Here s a QR code image that can be used to access this document on a portable device. Reel Mower Cutting Fundamentals The reel mower s cutting ability is the result of the corner edges of the reel blade
More informationCHAPTER 52 ELECTRICAL POWER TOOLS
CHAPTER 52 ELECTRICAL POWER TOOLS HOW TO CHOOSE AND USE THEM The Types and Uses pages provide you with a list of the electrical power tools found in the pioneer tool outfit. These pages should help you
More informationMy Background. Session Topics. General Industry Standards. Variety of Tools Covered. Related Standards/Hazards 1/27/2014
My Background Shop Safety: Equipment and Tools Mary Bauer UW Extension Webinar January 28, 2014 Mary Bauer CIH, CSP Compliance Assistance Specialist Eau Claire, WI 54701 715-832-9019 28 years w/ OSHA 20
More informationImportance of Safety...1. Scope.. Purpose... Responsibilities.. Student.. Student Safety Captain.. Mentor... Safety Rules of Power Up.
0 TABLE OF CONTENTS Importance of Safety...1 Scope.. Purpose... Responsibilities.. Student.. Student Safety Captain.. Mentor... Safety Rules of Power Up. Description of Tools/ How to Use them... Personal
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Drill DS402 05402 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DS402 Capacities Steel 3 mm Wood
More informationIMPORTANT: One Corner Entry Shower Door requires two cartons.
IMPORTANT: You should check with your local plumbing or building code agency about this product for compliance before it is installed. IMPORTANT: One Entry Shower Door requires two cartons. 95302-2-AB
More informationCollege of Forestry 610: Power Tools
College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide
More informationL A M I N AT E F L O O R C U T T E R OWNER S MANUAL
L A M I N AT E F L O O R C U T T E R OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationHammer Drill MODEL HP1500 MODEL HP1501 MODEL HP1510
ENGLISH Hammer Drill MODEL HP500 MODEL HP50 MODEL HP50 002395 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS
More informationMAKER LAB Safety Instructions Power Tool Training
MAKER LAB Safety Instructions Power Tool Training Note: All the instructions from Basic Training apply to Power Tool Training. If you have not completed Basic Training, do so before you complete Power
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill HP1630 HP1631 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Hammer Drill HP630 HP63 008892 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model HP630 HP63 Concrete
More informationMaker Hub Access Agreement
Maker Hub Access Agreement Open to all students, faculty, staff and registered guests, the Richardson Library Maker Hub is a creative space connecting DePaul researchers, makers, and entrepreneurs from
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationHAMMER DRILL OWNER S MANUAL
HAMMER DRILL OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationLOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR MACHINIST PROGRAM
LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR MACHINIST PROGRAM School: Industry Sector: Manufacturing & Product Dev. Class: Date: Teacher: Room: (Please Print)
More informationRotary Hammer HR4501C HR4510C HR4511C INSTRUCTION MANUAL
ENGLISH INSTRUCTION MANUAL Rotary Hammer HR450C HR450C HR45C 00864 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH
More informationATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size
Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880
More information2-Speed Hammer Drill HP2030 HP2031 INSTRUCTION MANUAL
ENGLISH (Original instructions) INSTRUCTION MANUAL 2-Speed Hammer Drill HP2030 HP203 002466 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS
More informationFinishing Sander. Given a properly adjusted finishing sander, accessories, instruction and demonstration of use, each student will be able to:
Finishing Sander I. Competencies Given a properly adjusted finishing sander, accessories, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the finishing
More informationThis unit covers the tools and equipment, that are used on a regular basis within a florist shop/ floral studio.
Maintain tools Maintain Floristry Tools and Equipment Introduction Introduction This unit covers the tools and equipment, that are used on a regular basis within a florist shop/ floral studio. We will
More informationTOOL KITS. THEY MATTER
TOOL KITS. THEY MATTER Discover more at se.rs-online.com/rspro 42 Piece Technicians Tool Kit RS ITEM # 1363400 02 03 04 05 12 15 14 06 07 08 09 10 11 13 16 17 18 19 20 21 1 Double Open End Wrench - 5x5.5
More informationOBJECTIVE SHEET FORMING TOOLS
11 OBJECTIVE SHEET FORMING TOOLS INTRODUCTION Concrete work requires the use of forming tools. They include some hand tools, circular saws, measuring tools, and leveling instruments. Using forming tools
More informationHand Tool Identification Worksheet. Name: Screw driver. Purpose: To turn the screws. Name: chisels. Purpose: To remove/chip away materials
Hand Tool Identification Worksheet Name: Screw driver Purpose: To turn the screws Safety Facts: Don t use for prying or as a chisel Name: chisels Purpose: To remove/chip away materials Safety Facts: Always
More informationNATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 2 SUPPLEMENTARY EXAMINATION
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010 ENGINEERING TECHNOLOGY This marking guideline consists of 8 pages. MARKING GUIDELINE -2- NC930(E)(M17)V QUESTION
More informationPortable circular saw Used to cut a wide range of construction materials Check the cord, leads and 3 pin plugs for any damage. A Residual Current Device (RCD) is plugged into the power source. Do not stand
More informationSession: Introduction to PPE and T&P
Session: Introduction to PPE and T&P Learning Objectives Explain what safety PPE, tools and plants are, their purpose and their uses Evaluation Criteria Interactive Questioning Duration Resources Facilitator
More informationElectrical Construction Name:
Tools of the Trade The following are common tools that are used in the electrical industry. This hand-out is to help familiarize you with the tools, the terminology, and their use. Retractable Steel tape
More informationTOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC
More informationModule Overview. Hand and Power Tool Safety Module covers:
Module Overview Hand and Power Tool Safety Module covers: Various hazards, basic safety procedures and safeguards associated with hand and portable power tools. Training information presented should not
More information"HAND AND POWER TOOL SAFETY"
MAJOR PROGRAM POINTS "HAND AND POWER TOOL SAFETY" Part of the "GENERAL SAFETY SERIES" Quality Safety and Health Products, for Today...and Tomorrow Outline of Major Points Covered in the "Hand and Power
More informationUniversity of Tennessee Safety Guidelines
University of Tennessee Safety Guidelines Program Subject: Hand and Power Tool Safety Guidance Approval Date: 12/1/2016 Next Scheduled Review: 6/1/2020 Date Effective: 12/1/2016 Contact Information: Program
More informationHand and Portable Power Tools Program
Hand and Portable Power Tools Program Copyright 2017 President and Fellows of Harvard University Revised September 21, 2017 Harvard University Department of Environmental Health & Safety 46 Blackstone
More informationREMINGTON. POWERHAMMER Model 476
WARNING ICON G 001 WARNING: REMINGTON POWERHAMMER Model 476 Operating Instructions The Remington Powerhammer is designed for use with Remington Powder 22 caliber, Type A crimped loads and Remington Power
More informationImpact Wrench MODEL 6905B MODEL 6906
ENGLISH Impact Wrench MODEL 6905B MODEL 6906 005305 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR
More informationInverurie & District Men s Shed Welcome Pack
Inverurie & District Men s Shed Welcome Pack Every new member should be given a copy of this Welcome Pack Any questions arising should be addressed to a Supervisor. Safety Briefing for New Members: (Required
More informationPRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE
PRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE 92778 1 GENERAL SAFETY INFORMATION For your safety, please read these instructions carefully before use and keep them in the
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63819-4670 FEATURES Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63819-4600 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
More informationHP2050 HP2050F HP2051 HP2051F
ENGLISH (Original instructions) INSTRUCTION MANUAL -Speed Hammer Drill HP050 HP050F HP05 HP05F 00989 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model
More informationHedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) Operator s manual Manual d utalisation Manual de instrucciones
HÄcksaxtillsats HA110 HA850 Jonsered Hedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) GB FR ES Operator s manual Manual d utalisation Manual de instrucciones KEY TO SYMBOLS
More information1/4 Sheet Palm Sander
OWNER S MANUAL Model Number: PS160CA-3 1/4 Sheet Palm Sander TM Registration Card Inside CAUTION! To reduce the risk of fire, electric shock and personal injury, read and understand the owner s manual
More information18 GAUGE ELECTRIC METAL SHEAR
241-9895 18 GAUGE ELECTRIC METAL SHEAR Operator s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in
More informationINDUSTRIAL CARPENTER
Performance Verification Packet This performance verification is designed as one method to evaluate job skills and safe work habits of a participant. The performance of the participant must be evaluated
More informationSTRAIGHT SHAFT TRIMMER ATTACHMENT 29402
STRAIGHT SHAFT TRIMMER ATTACHMENT 29402 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Read all safety rules and instructions carefully before operating this tool. TABLE OF CONTENTS Introduction...
More informationHABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy
HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy INTRODUCTION Safety is everybody's concern and is always an important consideration at any construction site. Building construction is
More informationTool Kits. Discover more at rspro.com
Tool Kits 42 Piece Technicians Tool Kit RS ITEM # 136-3400 02 03 04 05 12 15 14 06 07 08 09 10 11 13 16 17 18 19 20 21 1 Double Open End Wrench - 5x5.5 / 6x7 / 8x10 mm 2 6 Piece Needle File Set 3 Gas Soldering
More informationHand & Power Tool Safety
Hand & Power Tool Safety FA C I L I TAT O R S G U I D E What s Inside Facilitator s Guidelines a Overview b Getting Started d Presentation Guidelines f Lesson Plan h Frequently Asked Questions 1 Introduction
More informationHAND AND POWER TOOLS
HAND AND POWER TOOLS Steingass Mechanical Contracting, Inc. 754 Progress Drive Medina, Ohio 44256 (330) 725-6090 HAND AND POWER TOOLS General All power tools whether furnished by Steingass Mechanical Contracting,
More information2018 MICHIGAN SKILLS USA CHAMPIONSHIPS TASK AND MATERIALS LIST
2018 MICHIGAN SKILLS USA CHAMPIONSHIPS TASK AND MATERIALS LIST SKILL OR LEADERSHIP AREA: ADVERTISING DESIGN CONTEST LOCATION: Amway Grand Plaza Hotel 187 Monroe Avenue NW Grand Rapids, MI 49503, US (616)
More informationBreaker Hammer MODEL HM1800. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Breaker Hammer MODEL HM800 002884 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationHedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850.
Operator s manual Manual d utilisation Manual de instrucciones Hedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850. GB English FR ES
More informationHBS-AP ASSEMBLING INSTRUCTIONS
ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,
More informationGENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER
GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More informationME 120: Introduction to the Milling Machine
Introduction to the Milling Machine DISCLAIMER The content of this presentation is for informational purposes only and is intended only for students attending. The author of this information does not make
More informationGeneral Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must
General Safety All power tools can be dangerous if both general and tool specific safety instructions are not followed carefully. General safety instructions apply to all power tools, both corded and cordless.
More informationDANGER THIS TOOL FOR USE BY LICENSED OPERATORS ONLY. READ AND OBEY ALL SAFETY AND OPERATING INSTRUCTIONS BEFORE OPERATING TOOL.
THIS TOOL FOR USE BY LICENSED OPERATORS ONLY. READ AND OBEY ALL SAFETY AND OPERATING INSTRUCTIONS BEFORE OPERATING TOOL. R25 TOOL OPERATOR S SAFETY & OPERATING INSTRUCTION MANUAL SEMI-AUTOMATIC, LOW VELOCITY
More informationAngle Grinder MODEL 9553B MODEL 9555B
ENGLISH Angle Grinder MODEL 9553B MODEL 9555B 006649 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR
More information12mm (Max) 6mm (Max) 82mm (Max) 12mm (Max) 6mm (Max)
1 1 2 2 3 3 82mm (Max) 12mm (Max) 12mm (Max) 6mm (Max) 4 4 5 6 8 6mm (Max) 0.5 0mm 1 5 6 7 7 8 9 9 A = B 10 11 12 D B 1 13 14 15 0 C A D E 16 17 18 F G D B N H J G I K 19 A 20 G L 21 C K 1mm L M 1mm 22
More informationSTUDENT/FACULTY MACHINE SHOP SAFETY RULES
STUDENT/FACULTY MACHINE SHOP SAFETY RULES Supervisors have full authority over the shop and its safe use, including the responsibility, authority, and obligation to prohibit shop or tool access for the
More information3456 Hand & Power Tool Safety
3456 Hand & Power Tool Safety Leader s Guide 2005. Marcom Group Ltd. USING HAND & POWER TOOLS SAFELY This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured
More informationSAQCC FIRE D&GS TRAINING SUB COMMITTEE COURSE CURRICULUM
SAQCC FIRE D&GS TRAINING SUB COMMITTEE COURSE CURRICULUM COURSE ORIGINATOR Fire Detection - Workshop Practice and Safety Shane Nefdt DATE 09th January 2013 Amendment 1 05th October 2013 Change "student"
More informationCARPENTRY. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with carpentry as the occupational objective.
CARPENTRY PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of residential and commercial carpentry.
More informationMatch the tool with its name.
Handyperson Special Index Activity Page Match the tool with its name. Hammer Drill Nail Screw Nut Level Ladder Pliers Wrench Screwdriver Measuring Tape Tool Time Word Search BOARD BOLT BRICK CEMENT CONSTRUCTION
More informationJK Titan Tub Armor 2 and 4 Door
JK Titan Tub Armor 2 and 4 Door Thank you for purchasing one of our quality products. From product conception to the moment we packaged this product our focus has been on providing you with the very best.
More informationRotary Hammer HR3200C HR3210C HR3210FCT INSTRUCTION MANUAL
ENGLISH INSTRUCTION MANUAL Rotary Hammer HR00C HR0C HR0FCT 00856 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH
More informationStudy Guide: Agriscience Technology Mechanics
Study Guide: Agriscience Technology Mechanics Matching - Safety Colors: 1. Danger A. Yellow 2. Information B. Green 3. Safety C. Red 4. Warning D. Blue 5. Caution E. Orange Matching - Tool Categories 6.
More informationHedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850
Operator s manual Manual d utalisation Manual de instrucciones Hedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850 GB FR ES KEY TO SYMBOLS
More informationHand and Power Tool Safety
Hand and Power Tool Safety 2 Continuing Education Hours Wisconsin Contractors Institute N27 W23953 Paul Road, Suite 203 Pewaukee, WI 53072 www.wicontractorsinstitute.com 262-409-4282 What is the Purpose
More informationGENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING CUT-OFF MACHINE
GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More information