DRILL CHUCKS 2015/2016
|
|
- Brice Harrington
- 5 years ago
- Views:
Transcription
1 DRILL CHUCKS 2015/2016
2 NEW RÖH eshop First B2B eshop of the clamping technology industry Buy RÖH products online 24/7 Order as a guest customer without registration Intuitive search and filter function The first B2B eshop of the clamping technology industry provides you with the comprehensive range of RÖH catalogue products. In addition the customer receives extensive product information. Possibility to order in the eshop as an existing customer as well as a guest customer by credit card or bank transfer. RÖH GmbH info@roehm.biz Hotline
3
4 Table of contents DRILL CHUCKS Quick-action drill chucks industry SPIRO-I 1006 SUPRA-I 1007 SUPRA-S 1008 SUPRA-SK 1009 SUPRA-SK E 1010 Quick-action drill chucks EXTRA-RV EXTRA-RV EXTRA-RV 40 - Orange Line 1017 Key-type drill chucks PRIA-I 1020 PRIA-S / PRIA-L - Orange Line 1023 Drill chuck key BFS 1024 Two-jaw tapping chucks Tapping chuck GSF 1025 Accessories Taper shank arbor KD 1026 Reducing sleeve RH 1027 Extensions sleeve VLH 1028 Drill and reamer extension BV 1029 Errors and corrections are reserved!
5 Operation guide Drill chucks Operation guide TYPE SPIRO-I SUPRA-I ount SUPRA-SK SUPRA-SK E Self clamping, flat jaws Features Clamping capacity SUPRA-S B 10/12/ 16/18 J6 B 10/12/ 16/18 J 0/1/2/6/33 1/2-20 3/8-24 B 12/16/18 1/2-20 3/8-24 5/8-16 B 12/16 1/2-20 3/8-24 1/ For Concentricity Clockwise rotation For machines without spindle stop Radial locking Impact resistant Socket Automatic retightening Jaw Page yes optional 1002 metal machining centers corded drills plastic stationary drilling machines cordless screw drivers
6 Operation guide Drill chucks Operation guide E E ORANGE LIN TYPE EXTRA-RV 80 EXTRA-RV 60 EXTRA-RV 40 Features ORANGE LIN PRIA-I Keyless, radial locking Clamping capacity ount PRIA-S / - PRIA-L Key-type /2-20 3/8-24 SDS plus Hex 1/2-20 1/2-20 3/8-24 B 12/16/ 18/22/24 J 1/2/3/6/33 5/8-16 B 10/12/16/18 1/2-20 3/8-24 5/8-16 SDS plus Hex 1/2-20 3/ For Concentricity Clockwise rotation For machines without spindle stop Radial locking Impact resistant Socket Automatic retightening Jaw Page haer drilling impact drilling 1/4 hexagonal mount rounded jaws clockwise / counterclockwise rotation haer drilling flat jaws jaws with carbide inserts 1003
7 SELF-CLAPING FLAT JAW QUICK-ACTION DRILL CHUCK The absolute highlight of the SPIRO and SUPRA drill chucks is the self-automatic reclamping. This function, in combination with the hardened flat jaws, increases the clamping force proportional to the cutting force during drilling operation. This prevents the drill from slipping, even at extreme loads. Video drill chuck 1004
8 QUICK-ACTION DRILL CHUCKS INDUSTRY Quick-action drill chucks industry The high concentricity and the hardened flat jaws are the decisive factor for these drill chucks. Without these product features, the drill is not centrically clamped, with the result that the borehole will become too large. RÖH drill chucks guarantee precise concentricity of up to ADVANTAGES AT A GLANCE Increase in the clamping force proportional to the cutting force by the automatic reclamping function Precise concentricity of up to 0.05 due to the proven flat jaw principle Long lifetime due to large-area clamping chamfer etal bodies for extreme use in industry and trade Narrow tolerance conical mount for maximum driving force and precision Automatic reclamping function to increase the clamping force during drilling operation Hardened flat jaws for maximum concentricity and holding force 1005
9 Drill chucks SPIRO-I SPIRO-I Quick-action drill chucks SPIRO APPLICATION Especially suitable on machine tools, box column drills and drilling machines. TYPE Self-clamping flat jaw drill chuck with metal sleeve. Industrial design with maximum precision. CUSTOER BENEFITS Highest concentricity of up to 0.05 Increase in the clamping force proportional to the cutting force by the automatic reclamping function Conical mount for maximum driving force and precision TECHNICAL FEATURES - Strong retaining ring - Functional components made from steel - Hardened and ground - Only suitable for clockwise rotation A03 SPIRO-I for machine tools, box column drills and drilling machines Item no. Size Type Clamping capacity ount Concentricity deviation Weight g max I 0-6,5 B 10 0, ,5 68, I 0-6,5 B 12 0, ,5 68, I 0-10 B 12 0, ,5 90, I 0-10 B 16 0, ,5 90, I 1-13 J 6 0, , I 1-13 B 16 0, , I 3-16 J 6 0, ,5 106, I 3-16 B 16 0, ,5 106, I 3-16 B 18 0, ,5 106,
10 SUPRA-I Quick-action drill chucks SUPRA APPLICATION Especially suitable on stationary drilling machines and hand-operated drills. Rapid clamping and releasing of the drilling tools without key. Drill chucks SUPRA-I TYPE Self-clamping flat jaw drill chuck with metal sleeve. Industrial design with maximum precision. CUSTOER BENEFITS Highest concentricity of up to 0.12 Increase in the clamping force proportional to the cutting force by the automatic reclamping function Light and quick clamping of tools for maximum user-friendliness TECHNICAL FEATURES - Strong retaining ring - Functional components made from steel - All wear parts are hardened and ground - Only suitable for clockwise rotation A02 SUPRA-I heavy industrial version for stationary drilling machines and hand-operated drills Item no. Size Type Clamping capacity ount Concentricity deviation Weight g max I 0-4 J0 0, ,5 51, I 0-4 B10 0, ,5 50, I 0-6,5 3/8-24 0, ,5 65, I 0-6,5 J1 0, ,5 65, I 0-6,5 B10 0, ,5 65, I 0-6,5 B12 0, ,5 65, I 0-8 J1 0,12 35, , I 0-8 3/8-24 0,2 35, , I 0-8 B10 0, , I 0-8 B12 0,12 35, , I 0-10 J2 0,12 40,2 80,5 87, I 0-10 J33 0,12 40, , I /2-20 0,2 40,2 79,5 86, I /8-24 0,2 40,2 79,5 86, I 0-10 B12 0,12 40,2 79,5 86, I 0-10 B16 0,12 40,2 82,5 89, I /2-20 0, , I 1-13 J2 0, , I 1-13 J6 0, , I 1-13 B16 0, , I 1-13 J33 0, , I 3-16 J6 0, ,5 106, I 3-16 B16 0, ,5 106, ) 16 I 3-16 B18 0, ,5 106, ) shortened: B18 by
11 Drill chucks SUPRA-S SUPRA-S Quick-action drill chucks SUPRA APPLICATION Suitable for box column drills and hand-operated drills. TYPE Self-clamping flat jaw drill chuck with metal sleeve. CUSTOER BENEFITS Concentricity of up to 0.17 Increase in the clamping force proportional to the cutting force by the automatic reclamping function Easy and quick clamping of tools for maximum user-friendliness TECHNICAL FEATURES - Strong retaining ring - Functional components made from steel - Only suitable for clockwise rotation A02 SUPRA-S light version mainly for box column drills and hand-operated drills Item no. Size Type Clamping capacity ount Concentricity deviation max S 0,5-10 3/8-24 0,25 35, , S 0,5-10 1/2-20 0,25 35, , S /8-24 0,25 40,2 76,3 83, S /2-20 0,25 40,2 76,3 83, S 1-13 B12 0,17 40,2 78,8 86, ) 13 S 1-13 B16 0,17 40,2 82,3 89, S /2-20 0, ,5 97, S /8-16 0, ,5 97, ) 16 S 3-16 B16 0, ,5 98, ) 16 S 3-16 B18 0, ) shortened: B16 by 2,5 2) shortened: B18 by 7 Weight g 1008
12 SUPRA-SK Quick-action drill chucks SUPRA-SK APPLICATION For hand-operated percussion drills and drills up to 1300 watt with mounting thread and taper mount. Drill chucks SUPRA- SK TYPE Impact-resistant and self-clamping flat jaw drill chucks. Suitable for counterclockwise rotation by locking mechanism. CUSTOER BENEFITS Concentricity of up to 0.25 Increase in the clamping force proportional to the cutting force by automatic reclamping function and no releasing in counterclockwise rotation Impact-resistant by locking mechanism for universal use TECHNICAL FEATURES - Strong retaining ring - Functional components made from steel - Hardened and ground - Suitable for counterclockwise rotation up to maximal 15 Nm A02 SUPRA-SK for hand-operated percussion drills and drills up to 1300 watt Item no. Size Type Clamping capacity ount Concentricity deviation Weight g max S 0,5-10 3/8-24 0, , S 0,5-10 1/2-20 0, , S 0,5-10 B 12 0, , S /2-20 0,3 42, , ) 13 S /2-20 0,3 42, , S 1-13 B 12 0,25 42, , ) 13 S 1-13 B 16 0,25 42,8 80,2 89, ) blister packaging 2) shortened: B16 by
13 Drill chucks SUPRA- SK E SUPRA-SK E Quick-action drill chucks SUPRA-SK E APPLICATION For hand-operated percussion drills and drills up to 1000 watt and cordless drills with up to 70 Nm of torque. TYPE Impact-resistant and self-clamping flat jaw drill chucks. Suitable for counterclockwise rotation by locking mechanism. CUSTOER BENEFITS Concentricity of up to 0.35 Increase in the clamping force proportional to the cutting force by automatic reclamping function and no releasing in counterclockwise rotation Impact-resistant by locking mechanism for universal use TECHNICAL FEATURES - Functional components made from steel - Hardened and ground - Suitable for counterclockwise rotation up to maximal 50 Nm A02 SUPRA-SK E for hand-operated percussion drills and drills up to 1000 watt and cordless drills up to 70 Nm of torque Item no. Size Type Clamping ount Retaining Concentricity Weight capacity ring deviation max. g E 1,5-13 1/2-20 0,35 42, , E 1,5-13 1/2-20 0,35 42, , ) 13 E 1,5-13 1/2-20 0,35 42, , ) 13 E 1,5-13 1/2-20 0,35 42, , ) blister packaging 1010
14 Notes Notes 1011
15 AXIU USER-FRIENDLINESS The EXTRA-RV drill chucks impress with their user-friendliness. The drill chuck is clamped and locked with a single manual operation. The radial locking device prevents the unintentional release of the drill bit during clockwise and counterclockwise rotation and makes percussion drilling possible. Thus, these quick-action drill chucks are predestined for use on hand-operated drills. Video drill chuck 1012
16 QUICK-ACTION DRILL CHUCKS Quick-action drill chucks Due to the weight-reduced design as well as the easy handling, the RÖH EXTRA-RV drill chucks are optimally suited for use on hand-operated drills. In addition, the drill chucks are impact-resistant and can therefore be used universally. ADVANTAGES AT A GLANCE Easy clamping and locking with one manual operation for maximum user-friendliness Radial locking device to prevent release of the drill bit during clockwise and counterclockwise rotation Impact-resistant for universal use Compact and weight-reduced design for optimal use on handoperated drills Radial locking device to prevent unintentional release of the drill bit during clockwise and counterclockwise rotation Freely rotating protection disc to prevent damage inimal wear through carbide clamping jaws 1013
17 Quick-action drill chucks EXTRA Drill Chucks EXTRA-RV EXTRA-RV 80 APPLICATION For corded and cordless drills with and without spindle stop up to a maximum torque of 100 Nm and up to 1500 watt. TYPE Impact-resistant quick-action drill chuck with radial locking and plastic or metal sleeve. Available in two and single sleeve design for machines with and without spindle stop. With through-hole for clockwise and counterclockwise rotation. CUSTOER BENEFITS Easy clamping and locking with one manual operation for maximum userfriendliness Radial locking device to prevent release of the drill bit during clockwise and counterclockwise rotation Impact-resistant for universal use TECHNICAL FEATURES - With carbide inserts in the clamping jaws (size 13) - Equipped with collision protector by freely rotating protection disc EXTRA-RV 80 with radial locking, metal design Item no. Size Clamping capacity ount Retaining ring Concentricity deviation max /8-24 0,35 42, , /2-20 0,35 42, , /2-20 0,35 42, , ,5-13 3/8-24 0,4 42,7 64,5 72, ,5-13 1/2-20 0,4 42,7 64,5 72, ,5-13 1/2-20 0,4 42,7 64,5 72, ax. mach. capacity watt EXTRA-RV 80 with radial locking, plastic design Item no. Size Clamping capacity ount Retaining ring Concentricity deviation max /8-24 0,35 42, , /8-24 0,35 42, , /2-20 0,35 42, , /2-20 0,35 42, , ,5-13 3/8-24 0,4 42,7 64,5 72, ,5-13 3/8-24 0,4 42,7 64,5 72, ,5-13 1/2-20 0,4 42,7 64,5 72, ,5-13 1/2-20 0,4 42,7 64,5 72, ax. mach. capacity watt 1014
18 Quick-action drill chucks EXTRA EXTRA-RV 80 Drill Chucks EXTRA-RV EXTRA-RV 80 with SDS plus mounting shank and radial locking, metal design Item no. Size Clamping capacity ,5-13 Use exclusively with haer function deactivated ount Retaining ring 1/2-20 / SDS plus 42,7 64,5 72,4 EXTRA-RV 80 for impact screwdriver mounting 1/4 Hex, plastic design, specially suited for impact screwdrivers (eccentricity) Item no. Size Clamping capacity ount Retaining ring /4 Hex 42, ,1 1015
19 Quick-action drill chucks EXTRA Drill Chucks EXTRA-RV EXTRA-RV 60 APPLICATION For corded and cordless drills with spindle stop up to a maximum torque of 80 Nm and up to 1000 watt. TYPE Impact-resistant quick-action drill chuck with radial locking and plastic or metal sleeve. With through-hole for clockwise and counterclockwise rotation. CUSTOER BENEFITS Easy clamping and locking with one manual operation for maximum userfriendliness Radial locking device to prevent release of the drill bit during clockwise and counterclockwise rotation Impact-resistant for universal use TECHNICAL FEATURES - Equipped with collision protector by freely rotating protection disc EXTRA-RV 60 with radial locking, very compact metal design Item no. Size Clamping capacity ount Retaining ring Concentricity deviation max ) 13 1,5-13 1/2-20 0,35 42,7 55,8 69,2 1) blister packaging EXTRA-RV 60 with radial locking, very compact plastic design Item no. Size Clamping capacity ount Retaining ring Concentricity deviation max ) 13 1,5-13 1/2-20 0,35 42,7 55,8 69,2 1) blister packaging 1016
20 Quick-action drill chucks EXTRA EXTRA-RV 40 - Orange Line ORANGE LINE APPLICATION For corded and cordless drills with and without spindle stop up to a maximum torque of 60 Nm and up to 650 watt. Drill Chucks EXTRA-RV TYPE Impact-resistant quick-action drill chuck with radial locking and plastic or metal sleeve. Available in two and single sleeve design for machines with and without spindle stop. With through-hole for clockwise and counterclockwise rotation. CUSTOER BENEFITS Easy clamping and locking with one manual operation for maximum userfriendliness Radial locking device to prevent release of the drill bit during clockwise and counterclockwise rotation Impact-resistant for universal use TECHNICAL FEATURES - Equipped with collision protector by freely rotating protection disc EXTRA-RV 40 - Orange Line, metal design, with radial locking Item no. Size Clamping capacity ount Retaining ring Concentricity deviation max ) 13 1,5-13 1/2-20 0,35 42, , ) 13 1,5-13 1/2-20 0,35 42, ,5 1) blister packaging EXTRA-RV 40 - Orange Line, plastic design, with radial locking Item no. Size Clamping capacity ount Retaining ring Concentricity deviation max ) /8-24 0,35 42,7 50, ) /2-20 0,35 42,7 50, ) /2-20 0,35 42,7 50, ) 13 1,5-13 1/2-20 0,35 42, , ) 13 1,5-13 1/2-20 0,35 42, ,5 1) blister packaging 1017
21 UNIVERSALLY APPLICABLE Key-type drill chucks are the all-round talents among drill chucks. In stationary box column drills, hand-operated corded and cordless drills, the drill chucks perform in every way. Video drill chuck 1018
22 KEY-TYPE DRILL CHUCKS Key-type drill chucks Key-type drill chucks from RÖH convince with their universal applicability. These drill chucks have proven themselves over decades on stationary box column drills, machine tools, as well as on handoperated corded and cordless drills. ADVANTAGES AT A GLANCE Universally applicable for stationary use and on hand-operated drills High concentricity of up to 0.15 due to massive construction Increased clamping force due to proven transmission principle by means of drill chuck key assive construction a long lifetime Thread or taper mount for maximum drive force and precision Increased clamping force due to proven transmission principle from sprocket and drill chuck key Universally applicable for stationary use and on hand-operated drills 1019
23 Key-type drill chucks Drill Chucks PRIA PRIA-I APPLICATION For universal use on stationary box column drills as well as machine tools. TYPE Impact-resistant key-type drill chuck with key. Conical/threaded mount in acc. with DIN ISO (toothing in acc. with DIN 6349). For clockwise and counterclockwise rotation. Industrial design with maximum precision. CUSTOER BENEFITS High concentricity of up to 0.15 Increased clamping force due to proven transmission principle by means of drill chuck key TECHNICAL FEATURES - Hardened keyholes and clamping prisms PRIA-I heavy industrial version used on stationary box column drills as well as machine tools Item no. Size Type Clamping capacity ount Concentricity deviation max I 0,5-6,5 J1 0,15 29,5 42,5 52,5 S I 0,5-6,5 B12 0,15 29,5 47,5 57,5 S I 1-10 B16 0,2 42, S2 A I 1-10 J2 0,2 42, ,5 S2 A I 1-13 J6 0, ,5 86 S I 1-13 J33 0, ,5 86 S I /8-16 0, ,5 87,5 S I 1-16 B18 0,2 56, S I 1-16 J3 0,2 56, S I 1-16 J6 0,2 56, S I /8-16 0,2 56, ,5 S I 5-20 B22 0, ,5 113,5 S I 5-20 J3 0, ,5 103,5 S ) 26 I 5-26 B24 0, S4 1) with driver Key size 1020
24 Key-type drill chucks PRIA-S / - APPLICATION For universal use on stationary box column drills as well as hand-operated corded and cordless drills. Drill Chucks PRIA TYPE Impact-resistant key-type drill chuck with key. Conical/threaded mount in acc. with DIN ISO (toothing in acc. with DIN 6349). For clockwise and counterclockwise rotation. edium-heavy design with metal sleeve. CUSTOER BENEFITS High concentricity of up to 0.2 Increased clamping force due to proven transmission principle by means of drill chuck key TECHNICAL FEATURES - Hardened keyholes and clamping prisms PRIA-S / - slight intermediate sizes, primarily for hand-operated percussion drilling machines Item no. Size Type Clamping ount Concentricity Key size capacity deviation max ,5-6,5 3/8-24 0,2 29,5 42,5 53 S ,5-6,5 B10 0,2 29, S ,5-8 B10 0,23 29, S ,5-8 B12 0,23 29,5 47,5 57,5 S ,5-8 3/8-24 0,28 29,5 42,5 53 S ,5-8 1/2-20 0,28 29, ,5 S S 0,8-10 B12 0,23 34, ,5 S2 A S 0,8-10 3/8-24 0,28 34,5 49,5 61 S2 A S 0,8-10 1/2-20 0,28 34,5 49,5 61 S2 A ) 10 S 0,8-10 3/8-24 0,28 34,5 49,5 61 S2 A ) 10 S 0,8-10 1/2-20 0,28 34,5 49,5 61 S2 A ) 13 S 1,5-13 1/2-20 0,28 42, S2 A S 1,5-13 3/8-24 0,28 42, S2 A S 1,5-13 B16 0,25 42, S2 A S 1,5-13 B12 0,25 42, S2 A S 1,5-13 1/2-20 0,28 42, S2 A ) /2-20 0, ,5 87,5 S S /2-20 0, ,5 87,5 S S /8-16 0, ,5 87,5 S S 3-16 B 16 0, ,5 86,5 S S 3-16 B 18 0, ,5 94,7 S3 1) blister packaging PRIA 6L for impact drivers mounting 1/4 Hex Item no. Size Type Clamping capacity ount L 0,5-6,5 1/4 Hex 29,3 42,5 53 S14 For clockwise and counterclockwise rotation Only with switched-off impact function Key size 1021
25 Key-type drill chucks Drill Chucks PRIA PRIA HBF haer drill chuck with SDS plus adapter Item no. Size Type Clamping capacity ount HBF 2,5-13 SDS plus 42, ,5 S2A With carbide inserts in the clamping jaws Chuck end play for transmitting the entire impact onto the drill For clockwise and counterclockwise rotation. Key size PRIA with SDS plus adapter Item no. Clamping capacity ount Key size ,5-13 1/2-20 / SDS plus 42, S2A Only with switched-off impact function 1022
26 Key-type drill chucks PRIA-L - Orange Line APPLICATION For universal use on do-it-yourself drills. ORANGE LINE Drill Chucks PRIA-L TYPE Impact-resistant drill chuck with key and threaded mount in acc. with DIN ISO (toothin in acc. with DIN 6349). For clockwise and counterclockwise rotation. Lightweight version with metal sleeve. CUSTOER BENEFITS Concentricity of up to 0.35 Increased clamping force due to proven transmission principle by means of drill chuck key TECHNICAL FEATURES - Hardened clamping prisms PRIA-L - Orange Line Item no. Size Clamping capacity ount Concentricity deviation max ) /2-20 0,35 33,5 49,5 61,5 S2 A ) /8-24 0,35 33,5 49,5 61,5 S2 A ) 13 1,5-13 1/2-20 0,35 42, ,5 S2 A ) 13 1,5-13 3/8-24 0,35 42, ,5 S2 A 1) blister packaging Key size 1023
27 Drill chuck keys BFS Drill chuck keys BFS Drill chuck keys BFS Keys with DIN toothing 6349 for key-type drill chucks Item no. Size D L Weight g S S2 A S S Keys with DIN toothing 6349 for key-type drill chucks Item no. Size D L Weight g S2 AT S 3T Key with Jacobs-toothing Item no. Size D L Weight g S14 6,
28 Two-jaw tapping chucks Tapping chucks GSF Tapping chucks GSF A03 GSF without locking pin Item no. Size ount Square clamping width For taps Key Set of jaws B , B , A03 GSF with locking pin for an additional lock of the cone Item no. Size ount Square clamping width For taps Key Set of jaws B ,
29 Taper shank arbors for drill chucks Taper shank arbors KD Taper shank arbors KD A04 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. orse taper DIN 228 B Hole for alignment pin L A C E G H Weight g B ,065 14,5 10,095 9, B ,065 18,5 12,065 11, B , ,733 14, B , ,78 16, ) 1 B , ,431 16, B10 103, ,78 14,5 10,095 9, B12 106, ,78 18,5 12,065 11, B16 110, , ,733 14, B18 117, , ,78 16, ) 2 B18 108, , ,431 16, B22 128, ,78 40,5 21,793 19, B ,825 18,5 12,065 11, B , ,733 14, B , ,78 16, ) 3 B , ,431 16, B ,825 40,5 21,793 19, B ,825 50,5 23,825 21, B ,5 31, ,733 14, B ,5 31, ,78 16, ) 4 B ,5 31, ,431 16, B ,5 31,267 40,5 21,793 19, B ,5 31,267 50,5 23,825 21, B ,5 44, ,733 14, B18 204,5 149,5 44, ,78 16, ) 5 B18 195,5 149,5 44, ,431 16, B22 213,5 149,5 44,399 40,5 21,793 19, B24 224,5 149,5 44,399 50,5 23,825 21, ) for SUPRA and SPIRO with shortened pick up taper Taper shank arbors with tapped shank (type 238) or cylindrical shank type (type 237) on request A04 Taper shank arbors with Jacobs drill chuck taper completely hardened and ground Item no. orse taper DIN 228 B Hole for alignment pin L A C E G H Weight g J1 86, ,065 16,7 9,754 8, J ,065 22,2 14,199 12, J , , J ,065 25,4 17,17 15, J ,78 16,7 9,754 8, J2 106, ,78 22,2 14,199 12, J3 115, , , J33 109, ,78 25,4 15,85 14, J6 109, ,78 25,4 17,17 15, J ,825 22,2 14,199 12, J , , J ,825 25,4 15,85 14, J ,825 25,4 17,17 15, J ,5 31, , J ,5 31,267 25,4 17,17 15,
30 Reducing sleeves Reducing sleeves RH Reducing sleeves RH A05 Precision version DIN 2185 completely hardened, ground internal and external Item no. External taper T Internal taper T L Weight approx. g A05 Taper drift Item no. For T Weight g A05 Taper drift for one-hand-operation Item no. For T Weight g
31 Extension sleeves VLH Extensions sleeves VLH Extensions sleeves VLH A05 Precision version DIN 2187 completely hardened, ground internal and external Item no. External taper T Internal taper T D L1 L2 Weight g , , , , , , , , , ,
32 Drill and reamer extensions BV Drill and reamer extensions BV Drill and reamer extensions BV A05 Precision version completely hardened, ground internal and external Item no. External taper T Internal taper T D L1 L2 Weight approx. g , , , , , ,
33 RÖH GmbH Heinrich-Röhm-Straße Sontheim/Brenz Germany Tel Fax info@roehm.biz Id.-Nr / 0616
First B2B eshop of the clamping technology industry
DRILL CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function The
More informationUNIVERSALLY APPLICABLE
UNIVERSALLY APPLICABLE Key-type drill chucks are the all-round talents among drill chucks. In stationary box column drills, hand-operated corded and cordless drills, the drill chucks perform in every way.
More informationMAXIMUM USER-FRIENDLINESS
MAXIMUM USER-FRIENDLINESS The drill chucks impress with their user-friendliness. The drill chuck is clamped and locked with a single manual operation. The radial locking device prevents the unintentional
More informationUNIVERSALLY APPLICABLE
UNIVERSALLY APPLICABLE Key-type drill chucks are the all-round talents among drill chucks. In stationary stationary drill machines, hand-operated corded and cordless drills, the drill chucks perform in
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter
More informationNEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
More informationNEW DUPLEX CLAMPING SYSTEM. Combined internal and external clamping in one clamping tool
NEW DUPLEX CLAMPING SYSTEM Combined internal and external clamping in one clamping tool DUPLEX CLAMPING SYSTEM The new DUPLEX clamping system combines mandrel and collet chuck in a single clamping tool,
More informationNEW DURO-TA XT KEY BAR CHUCK. The flexible lightweight for large and small workpieces
NEW DURO-TA XT KEY BAR CHUCK The flexible lightweight for large and small workpieces DURO-TA XT KEY BAR CHUCK To meet the requirements of turning and milling machines for flexibility, workpiece accessibility
More informationmicro technology Clamping technology for the smallest workpieces
micro technology Clamping technology for the smallest workpieces 2 Clamping technology for the machining of filigree workpieces High-tech in a minimum compass is offered by RÖHM s individual clamping solutions.
More informationConstant Face Driver CoE. CoE: Retrofitting has time-out. Turning and milling in one set-up. Benefits and areas of application
Benefits and areas of application 11 CoE: Retrofitting has time-out Best for efficiently turning of workpieces along their entire Developed according to the construction set principle, length without re-clamping
More informationOIL AND GAS. Clamping technology for crude oil and natural gas industries
OIL AND GAS Clamping technology for crude oil and natural gas industries CRUDE OIL AND NATURAL GAS - THE ENERGY OF TODAY RÖHM is the specialist for clamping technology with a wide product range, unrivaled
More informationA new dimension of changeability. Unique options for every application. Developed and made in Germany by:
A new dimension of changeability Unique options for every application Developed and made in Germany by: The BaerGrip ratchet is in fact very versatile. As the only 1/4"-ratchet in the world it can be used
More informationALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
More informationVice novelties Clamping technology for NC machining. driven by technology
Vice novelties Clamping technology for NC machining http://www.roehm.biz/schraubstockneuheiten driven by technology RKE NC-Compact vices The new NC-compact vice RKE: optimized design with proven quality.
More information2.0. Retaining Elements. Flange Adapters. Adjustable Flange Adapters. Reducing Adapters. Reducing Sleeves. Adaption of Clamping Device
2.0 Retaining Elements Flange Adapters Adjustable Flange Adapters Reducing Adapters Reducing Sleeves Adaption of Clamping Device Special Adapters NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen
More informationNEW EASYLOCK ZERO POINT CLAMPING SYSTEM. Palletising and clamping tools from a single source
NEW EASYLOCK ZERO POINT CLAMPING SYSTEM Palletising and clamping tools from a single source EASYLOCK ZERO POINT CLAMPING SYSTEM Clamping the workpiece can be a time-consuming and cost-intensive factor
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationMACHINE TOOL ACCESSORIES
DRILL CHUCKS SERIES 319: MACHINE SHOP DISCOUNT SUPPLY BALL BEARING KEY TYPE SUPER CHUCKS SERIES 319: These chucks, robust in design, have great precision. All parts subject to wear are hardened for high
More informationOperating instruction for the quick-change tap holders type:
type: KSN 0 KSN 1 KSN 3 KSN 4 KSN 5 Date of edition: 01.02.2008 Stage of alteration: 1 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationProduct Summary First class products by the specialist in clamping technology
Product Summary First class products by the specialist in clamping technology The clamping tools which we manufacture are as varied as the sectors for which we work. RÖHM - one for all The name Röhm stands
More informationHYDRAULIC ZERO-REACH ARBORS. Zero-reach arbors with hydraulic chuck and matching POKOLM accessories
HYDRAULIC ZERO-REACH ARBORS Zero-reach arbors with hydraulic chuck and matching POKOLM accessories HYDRAULIC ZERO-REACH ARBORS ARBOR AND ADAPTER SYSTEMS HYDRAULIC ARBORS AND ADAPTERS: OUTSTANDING TOOL
More informationDrilling Chiselling Screwdriving Stirring
M+ SYSTEM: MACHINE AND ACCESSORIES PERFECTLY SYNCHRONISED FOR MAXIMUM PERFORMANCE. Even during the development phase at Metabo, machines and accessories are optimally adjusted and tested to complement
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationFace Drivers with appropriate changable parts and accessories
8 NEIDLEIN-SPANNZEUGE GmbH www.neidlein.de 9 Face Drivers with appropriate changable parts and accessories FSB FFB FSP FFBR FDNC FOR TURNING AND HARD TURNING WITH DRIVE PINS Face Drivers FSB / SB 10 Face
More informationTools for Clamping between Centers process oriented for turning, hard turning, grinding and milling
www.neidlein.de Tools for Clamping between Centers process oriented for turning, hard turning, grinding and milling Process oriented clamping solutions with maximum torque transmission and supreme accuracy
More informationTHE RIGHT LIVE CENTRE FOR EVERY APPLICATION. For small and large centres For cramped work area For lower-lying centres For large boreholes
THE RIGHT LIVE CENTRE FOR EVERY For small and large centres For cramped work area For lower-lying centres For large boreholes 2006 LIVE CENTRES The requirement for high cutting capacities and high working
More informationEnsat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
More informationROOP LAL Unit-6 Drilling & Boring Mechanical Engineering Department
Lecture 4 Notes : Drilling Basic Mechanical Engineering ( Part B ) 1 Introduction: The process of drilling means making a hole in a solid metal piece by using a rotating tool called drill. In the olden
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationGR 1 GR 2 GR 3 GR 1-S GR 2-S GR 3-S. Tapping attachment GR / GR-S. Operating instruction
GR 1 GR 2 GR 3 GR 1-S GR 2-S GR 3-S Tapping attachment GR / GR-S Operating instruction Contents: 1 Application range, safety instructions and technical data... 4 1.1 Application range, determined use,
More informationvario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker
turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground
More informationFirst B2B eshop of the clamping technology industry
VICES 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function The first
More informationWorkpiece Clamping. Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping
Workpiece Clamping Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping Overview of Contents Page Collets for Workpiece Clamping Draw-in Collets DI 2 Dead Length Collets DL 3 Emergency Dead
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationWritten By: Thomas Opsomer
Power Drill Chuck Replacement This guide will help you to replace the chuck on almost any corded or cordless drill. Written By: Thomas Opsomer ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION
More informationDIRECTION FOR USE Evid. č
DIRECTION FOR USE Evid. č. 1520304 SAFETY THREAD-CUTTING HEADS Zhb 21, Zhb 31, Zhb 41, Zhb 51 Zhb 21A, Zhb 31A, Zhb 41A Manufacturer: NAREX MTE s.r.o., Moskevská 63, CZ-10100 Praha 10, Czech Republic Tel:
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationCLAMPING TECHNOLOGY Individual special clamping tools
CLAMPING TECHNOLOGY Individual special clamping tools 1 QUALITY SINCE 1958 Know-how, the highest quality and first class engineering. We see ourselves as a system supplier and offer our customers a full
More informationFace Drivers FSP / FSPB
4 Face Drivers FSP / FSPB NEIDLEIN-SPANNZEUGE GmbH Face Drivers FSP / FSPB with drive disk and movable center pin The entire surface of the workpiece can be tooled and finished by clamping with a maximum
More information» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
More informationConcrete drills 2.0. SDS-plus hammer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble.
» CONCRETE DRILLS Concrete drills SDS-plus haer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble. SDS-plus haer drills with 4 cutters Applications: for
More information1.3. Face Drivers for Grinding. FFBR with Flange Retainer. FBSR with Taper Shank Retainer. FFBR/FBSR Changeable Parts FFB/FFBH.
1.3 Face Drivers for Grinding FFBR with Flange Retainer FBSR with Taper Shank Retainer FFBR/FBSR Changeable Parts FFB/FFBH FFB/FFBH Changeable Parts FBSR PN/FFPR/FBS Special Face Drivers NEIDLEIN-SPANNZEUGE
More informationVarious other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationCompetence Gun Boring. KOYEMANN Floating Tools Power Reamer
Competence Gun Boring KOYEMANN Floating Tools Power Reamer R The KOYEMANN Floating Principle Reaming has been used for fine machining bores with excellent results from the very start of cutting technology.
More information5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationBITS, NUTSETTERS, ADAPTERS
BITS, NUTSETTERS, ADAPTERS Square Recess Power Driver Bits... Colour-Coded Square Recess Power Driver Bits... Phillips Power Driver Bits... 6 Colour-Coded Phillips Power Driver Bits... 7 Six Lobe Power
More informationThe Ensat self-tapping threaded insert...
The nsat self-tapping threaded insert... nsat is a self-tapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationVIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationAssembly and Adjusting Instructions for Modules 6x6 and 4x4 Alignment Adapter
Translated version of the instructions Version: 11/2017 SAP no.: 400151427 Assembly and Adjusting Instructions for Modules 6x6 and 4x4 Alignment Adapter The document was prepared by Gühring KG. All rights
More informationTRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
More informatione-cylinder Saves energy and cash ENERGY EFFICIENCY
e-cylinder Saves energy and cash ENERGY EFFICIENCY Calculation example for energy and time saving ENERGY EFFICIENCY Sample calculation for energy savings with an electrical cylinder: Energy consumption
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More informationPSK Tool Holders. Chapter 2 of the Product Catalogue 2010/2011 Precision Tools
PSK Tool Holders Chapter 2 of the Product Catalogue 2010/2011 Precision Tools PSK - Polygonal Kelch GmbH Tel.: +49 (0) 71 51 / 2 05 22-0 Fax: +49 (0) 71 51 / 2 05 22-11 info@kelchgmbh.de www.kelchgmbh.de
More informationCORDIPAR. Universal Length Measuring Instruments. From our range. KORDT GmbH & Co. KG Preyerstraße D Eschweiler / GERMANY
From our range External Thread Measuring Gauges from 2-996 nominal diameter Internal Thread Measuring Gauges from - 1026 nominal diameter Thread Depth Gauges to check thread depth of bores Thread Setting
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationOperating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular
More informationROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table
Horizontal & Vertical Rotary Table (HVRT) OPERATION AND SERVICE MANUAL Tilting Rotary Table Horizontal & Vertical Rapid Indexer VERTICAL AND HORIZONTAL ROTARY TABLE This Horizontal & vertical table is
More informationSport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationData Sheet: LDS 1034 Date:
Data Sheet: LDS 1034 Date: 06-02-2012 Product: Drill Chuck Arbors Page 1 of 6 Morse Taper to Jacobs Taper The JTMT range of Drill Chuck Arbors provide for connection of machine spindles with Morse Tapers
More informationComplete O.D. Machining in One Operation
MFDODM209 Complete O.D. Machining in One Operation Including: Hydra-Drive For Extreme Accuracy CREATING INNOVATIONS IN FACE DRIVING TECHNOLOGY www.facedrivers.com Complete O.D. Machining in one Operation
More informationELECTRIC TOOL CORPORATION
Cat. No. -0 / Hex Demolition Hammer Cat. No. 0-0 Spline Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 -9-00 d 000 -9-00 d SpecialTools Require Forcing discs
More informationREPAIR INSTRUCTIONS. Cat. No Cat. No MILWAUKEE ELECTRIC TOOL CORPORATION. SDS Max Demolition Hammer. SDS Max Rotary Hammer
Cat. No. 9-0 SDS Max Demolition Hammer Cat. No. -0 SDS Max Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 8-9-0 d 000 8-9-0 d Special Tools Require Forcing
More informationOperating instruction for the quick-change adapters type:
type: EM 00 - U EM 01 - U EM 03 - U EM 04 - U EM 05 - U EM 01 U / IKZ EM 03 U / IKZ EM 04 U / IKZ EM 05 U / IKZ Date of edition: 01.02.2008 Stage of alteration: 2 Please keep this for future use! Contents:
More informationSnappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
Proudly Made in the USA ADAPTS ALL 1/4 HEX POWER BIT TOOLS TO YOUR POWER DRILL No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
More informationThe ideal product range for highly accurate measurements
MaraMeter. Indicating Snap Gages The ideal product range for highly accurate measurements Improves efficiency Delivers accurate and reliable measurement results Reduces costs - 2 MaraMeter. Indicating
More information1.1. Face Drivers. for Soft and Hard Turning with Drive Pins FSB FFB FFBH. Pipe Driver. Changeable Parts
1.1 Face Drivers for Soft and Hard Turning with Drive Pins FSB SB FFB FFBH Pipe Driver Changeable Parts NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen. Germany Phone +49 (0) 74 71 /
More informationFacing and Boring Heads UPA
Facing and Boring Heads UPA Universal Facing and Boring Heads For use on universal milling and boring machines, jig borers etc. suitable for all types of work in single or series production. Product range
More informationNEIDLEIN LIVE CENTERS AND DEAD CENTERS
NEIDEIN IVE CENTERS AND DEAD CENTERS Ultra ive Center RN Type RN with morse taper NEIDEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the
More informationFast and flexible use Powerful results
Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationVhu. Universal Boring Heads Vhu 2 1/8, 3 1/8, 4 7/8, 6 ¼. Vhu. Instruction Manual No.:
Instruction Manual No.: 2420304 Vhu Vhu Universal Boring Heads Vhu 2 1/8, 3 1/8, 4 7/8, 6 ¼ Producer: Moskevska 63 101 00 Praha 10 Vrsovice Czech Republic Phone: +420 246 002 249 Fax: +420 246 002 335
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationOperating Manual Axis 60mm Self Centering Vise Axis 100mm Self Centering Vise
Operating Manual Including installation and assembly instructions 80000 5-Axis 60mm Self Centering Vise 80100 5-Axis 100mm Self Centering Vise 80300 5-Axis 40mm Fixed Jaw Vise 80400 5-Axis 60mm Fixed Jaw
More informationRadio-wave Touch Probe RWP38.41
OPERATING INSTRUCTIONS (Translation of the original operating instructions) Page System Components, Technical Data, Dimensions 1 Stylus Change, Battery Replacement 2 Aligning Stylus to Spindle Centre 3
More informationXXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationAmana Tool Boring/Drilling Bits
Section P-2: Amana Tool Bits Amana Tool Bits Section P-2: Amana Tool Bits Last Updated: 07/01/10 Section P-2: Amana Tool Bits Maverick Hardware Brad Point Boring 70mm Long, X 30mm Shank, Right Hand, Black
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationClamping tools with flange module
Clamping tools with flange module MAPAL clamping tools with flange module are recommended for machining conditions in which radial run-out and angular error on the machine spindle must be compensated.
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationOperating instructions. Twin cutter boring head Ø mm
Operating instructions Twin cutter boring head Ø23.5-153.0 mm English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety information
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationQuill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
More informationDimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding
Info Dimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding DIN 55026 from taper size 4 with driver. Spindle head Size C1 C2 D hole count outer olt
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationReamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationModular clamping and positioning system for milling machines and machine tool. flexible
Modular clamping and positioning system for milling machines and machine tool flexible Titan 125 Everything under control The new Allmatic TITAN 125 high pressure vice combines virtually all the features
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More informationXXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationHardinge FlexC Dead-Length Collet System Style A. Installation Instructions and Parts Lists. FlexC Collet System Style A Instructions B-153
Hardinge FlexC Dead-Length Collet System Style A Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationSport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets
Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In
More information