INSTRUCTION MANUAL PALISSADE CONE TABLE. By Ronan & Erwan Bouroullec

Transcription

1 INSTRUCTION MANUAL PALISSADE CONE TABLE By Ronan & Erwan Bouroullec

2 INTRODUCTION Based on the desire to develop a series of tables to complement the Palissade outdoor furniture collection, French design duo Ronan and Erwan Bouroullec teamed up with HAY to create the Cone Palissade Table. Its solid base and ultra-thin steel tabletop share the same graphic design idiom as the rest of the series, enabling the table to be strong without being bulky and elegant without being fragile. The series comprises various sizes with round and square tabletops; all featuring a stabilising concrete base. Specifically designed for outdoor use, the powder-coated steel has a protective outdoor primer for optimal durability and resilience. The collection is available in selected colours and is ideal for terraces, balconies, gardens, cafés and public spaces.

3 CARE AND MAINTENANCE CARE AND MAINTENANCE CAUTION POWDER COATED STEEL STORAGE With a little care you can prolong the life of your Use coasters under damp, hot or coloured objects Wipe with a clean cloth wrung in water or in a The life expectancy of your table will vary depending furni ture. Follow the instructions for the materials to avoid permanent stains. solution of water and a neutral detergent. Remove on the weather and type of use. We recommend that of your specific product to make sure that it stays soap residue immediately using a clean, dry cloth. you store it in a dry, ventilated place during winter in the best shape for as long as possible. Be careful not to scratch or damage the surface and keep it protected from scratches and bumps. with sharp objects. Avoid using scouring cream or scouring pads, The information below is only intended as a general as they may scratch the surface. guideline. For more information on how to remove Avoid partially covering the surface, for example specific stains, please enquire where you bought with tablecloths, cushions or place mats, as colour Do not use solvents as they may have an adverse the furniture. variances may appear. effect on the coating. The Cone Palissade Table has a two component Minor spots of rust under the furniture and bases Never use acetic acid or citric acid. coat primer and outdoor powder coating which are considered as a natural result of general use and provides a barrier to corrosive elements making it can be treated using the care instructions below. In the event of lime deposits on the surface use a suitable for outdoor use. clean, damp cloth wrung in lukewarm water with one Direct placement on a seafront can lead to part vinegar to nine parts water and avoid scrubbing Always remove stains quickly before they can corrosion. as this may scratch the surface. do any permanent damage to the furniture. Wipe off bird droppings quickly as they may Small scratches or damage to the powder coated When you move your furniture, make sure you lift lead to permanent corrosion or staining surfaces can lead to corrosion. They can be it rather than pulling or pushing it to avoid damaging retouched and protected from corrosion with a the floor, legs and mountings. Wipe off the furniture if it becomes wet after rain special repair lacquer available at HAY stores and or snowfall as this will damage the surface over time authorized dealers. If the metal is uncovered it is Tighten up the screws after one to two months necessary to sand the area before repairing it (grain use and whenever required. 220). Wipe it over with a clean dry cloth and clean the area with methylated spirits before repainting it. Avoid improper use such as putting your feet on the table or standing on the it.

4 PARTS Make sure that all parts are included. 1. While assembling, keep the table inside the cardboard box in order to protect the table from scratches etc. Make sure that all parts are included. A x 1 B x 1 C x 1 D x 1 E x 5 Do not assemble alone, a minimum of two people is recommended.

5 1. 2. Place the A part on top of the B part, inserting the C part in between them. Fasten the screws (E) with the Allen key (D). Make sure all screws are inserted before tightening them completely.

6

7 Havnen Horsens Denmark / hay@hay.dk ITEM NO