US SERIES ID MOUNT MACHINING EQUIPMENT. Ø 8 mm mm Ø INDUSTRIES : ID MOUNT MACHINING SM8 S18 US25 US30CH US40 US80 US150 US450
|
|
- Marcus Stafford
- 5 years ago
- Views:
Transcription
1 US SERIES ID MOUNT MACHINING EQUIPMENT Ø 8 mm mm Ø ID MOUNT MACHINING US Series SM8 S18 US25 US30CH US40 US80 US150 US Machining Capacity 8-32 mm mm mm mm mm mm mm mm / INDUSTRIES : Shipbuilding Boiler Chemical Nuclear Oil & gaz Renewable energies
2 Additional clamping jaws extend the capacity of the machine. Different configurations are possible to suit different types of applications. Several clamping options are available to suit a particular application. As an option, the clamping can be done automatically. Clamping jaws are available in several different configurations. Clamping jaws for expanded tubes are also available. Clamping is perfectly concentric. Up to four tool-bits can be mounted so that machining operations, such as, facing, beveling and counterboring can be carried out simultaneously. Two or more tool bits used simultaneously ensure a perfect balance of forces during the machining operations. Interchangeable drives: Electric or Pneumatic Drive Several options are available to suit different applications. ID MOUNT MACHINING Light, dependable rugged, The PROTEM US-SERIES will perform repeatable high quality weld preparations on all types of materials including mild, chrome, stainless steel, duplex, super duplex, coppernickel alloy steel, inconel, P91, aluminium, copper and exotic alloys. Safety Handle 11
3 SM8 SM8 Ø 8-32 mm ( ) 3 kg 6.6 lbs : The air-powered SM8 mini beveler is a very robust and reliable portable weld-end preparation tool. It performs repeatable quality weld preps on most metal pipes and tubes including carbon and stainless steel, duplex and super duplex, inconel etc. The cutting head will bevel, face individually or in a synchronised operation. The SM8 is easily installed on all pipes and completely torque accepting (requires no holding). The PROTEM SM8 unit requires only 17,5 mm (0,6889 ) minimum clearance from the pipe centerline, thereby allowing precise machining inside restricted working areas. ID MOUNT MACHINING SM8 with pneumatic drive DIMENSIONS : SM8 SM8 with pneumatic drive, weight ~ 1,6 kg/3,5 lbs SM8E SM8 with electric drive, weight ~ 2 kg/4,4 lbs SM8-K01 Transport box for SM8 Beveling Cutting Facing Counterboring Surfacing TECHNICAL FEATURES : Machine SM8 Machining Capacity 8 mm (0,315 ) ID 32 (1,260 ) mm OD Specific shapes & angles I, V, J, X or any other specific weld preps - Special shape on request Clamping manual, without key Feed stroke 10 mm Cutting head gear drive 120 rpm off-load speed, 60 rpm nominal speed Pneumatic drive 370 W, 6 bar (87 psi), 350 l/ min (12 cfm) Weight 3 kg (6,6 lbs) Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 12
4 SM8-E OPTIONS : Expansion collet SM8-051[Specify Ø] Douille d'expansion longueur 40 mm, [Specify Ø] SM8-052[Specify Ø] Douille d'expansion longueur 50 mm, [Specify Ø] SM8-054[Specify Ø] Short collet for SM8, length 25 mm, [Specify Ø] SM8 with electric drive Socket holder SM8-037 Socket rod A (8-12 mm) SM8-040 Socket rod B (12-29 mm) SM8-057 SM8-057 short socket rod A (8-12 mm) SM8-058 SM8-058 short socket rod B (12-29 mm) SM8-059 SM8-059 short socket holder no. 3 (17-30,2 mm) SM8-041 Socket holder Nr. 1 (8-12 mm) SM8-043 Socket holder Nr. 2 (12-17 mm) SM8-038 Socket holder Nr. 3 (17-29 mm) TOOL BITS : SM8 battery ID MOUNT MACHINING Socket rod SM8 Battery APPLICATIONS : O-SM8-M1-4-H-70 Facing, 4 mm wall thickness O-SM8-M2-4-H beveling, 4 mm wall thickness VISUAL TOOL HOLDER: O-SM8-M3-4-H beveling, 4 mm wall thickness O-SM8-M4-4-H beveling, 4 mm wall thickness 13
5 S18 S18 Ø mm ( ) : 4 kg 8.8 lbs The S18 portable pipe beveling tool is a powerful, robust, reliable and versatile beveling and facing machine. The standard tool plate will accept multiple tool bits, allowing up to four simultaneous machining operations. Such operations may include beveling, facing, counterboring, compound beveling, OD chamfering, removal of weld joints on tube sheets and or cut to lenght of tubes on tube sheets. The S18 features a self-accepting torque system and an integral drive motor. The robust S18 will perform repeatable high quality weld preparations on all types of materials including stainless steel duplex, super duplex, inconel, P91etc. S18 S18 with pneumatic drive, weight ~ 2,2 kg/4, 9 lbs DIMENSIONS : S18 with pneumatic drive S18E S18KH S18CA S18 with electric drive, weight ~ 3,0 kg/ 6,6 lbs S18 with feed lever, pneumatic drive, weight ~ 2,5 kg/ 5,5 lbs S18 CA with automatic pneumatic clamping and a manual feed lever, feed stroke 16 mm, weight ~ 5,0 kg/ 11 lbs Beveling Cutting Facing Counterboring Surfacing TECHNICAL FEATURES Machine Machining Capacity Specific shapes & angles S18 Standard model: 18 mm (0.709 ) ID 42 mm (1.654 ) OD With options: 14 mm (0,551 ) ID 42 (1.654 ) mm OD Facing, 30, 37 30, 45 bevel, counterbore, J-bevel, others on request Clamping manual Feed stroke 35 mm (1,380 ) Cutting head gear drive Pneumatic drive Weight 300 rpm off-load speed 150 rpm nominal speed 370 W, 6 bar (87 psi), 350 l/ min (12 cfm) 5.5 kg (12.1 lbs) Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 14
6 S18 Battery S18E S18 with electric drive S18 Battery S18-CA APPLICATIONS : ACCESSOIRES : S18-K01 S18-K02 Transport box for S18, SE18E or S18KH Transport box for S18CA S18-OM1 S18-LEV S18-PPF-90 S18-PPF S18-BAL S18-FC S18-OM1 optional mandrel for Ø mm S18-LEV feed lever for S18 S18-PPF-90 milling head 90 for S18 S18-PPF milling head 30 for S18 S18-BAL balancer for S18 S18-FC limit stop for S18 Other options on request 15
7 S18CA S18CA Ø mm ( ) : 5 kg 11 lbs S18CA S18 CA with automatic pneumatic clamping and a manual feed lever, feed stroke 16 mm, weight ~ 5,0 kg/ 11 lbs Beveling Cutting Facing Counterboring Surfacing S18CA ON-SITE : S18 CA with automatic pneumatic clamping DIMENSIONS : TECHNICAL FEATURES Machine Machining Capacity Specific shapes & angles S18CA 14 mm (0,551 ) ID 42 (1.654 ) mm OD I, V, J, X, compound bevels, counterboring - Special shape on request Clamping manual Feed stroke 13 mm (0.51 ) Cutting head gear drive Pneumatic drive Weight 300 rpm off-load speed 150 rpm nominal speed 370 W, 6 bar (87 psi) 350 l/min (12 cfm) 5 kg (11 lbs) Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 16
8 US18TP The US-TP series are full automatized beveling machines integrating the clamping mandrel and the tool holders of the US Series. The clamping and the feed are automatic and adjustable. The US-TP series are suited for serials jobs on heat exchangers (tubes cut to length, weld joint extraction, beveling works.). US18TP US18TP Tube beveling machine for tube plates, mm ID. TOOL BITS : VISUAL O-S18-E1-4-H-50 Facing tool bit O-S18-E2-4-H beveling tool bit O-S18-E3-4-H beveling tool bit O-S18-E4-4-H beveling tool bit O-S18-E4-4-H inverse beveling tool bit 17
9 US25 US25 Ø mm (1/2-4.7 ) : 5.5 kg 12.1 lbs The PROTEM US25 is a powerful, robust, reliable and versatile portable tube and pipe beveling and facing machine. The PROTEM US25 will perform repeatable high quality weld end preparations on virtually all materials including mild, chrome, stainless steel, duplex, super duplex, copper-nickel alloy steel, inconel, P91, aluminium, copper etc... Versatile cutting head accepting up to 4 cutting bits: Four machining operations can be carried out simultaneously or individually. The tool bits can be changed and adjusted very quickly. Carbide tool inserts can alternatively be used. Beveling Cutting Facing Counterboring Surfacing US25 with pneumatic drive DIMENSIONS : TECHNICAL FEATURES Machine Machining Capacity Specific shapes & angles US25 Standard model: 25 mm (0,984 ) ID 90 mm (3,543 ) OD With options: 12.5 mm (0,492 ) ID 300mm ( ) OD Facing, 30, 37 30, 45 bevel, counterbore, J-bevel, others on request Clamping manual with key Feed stroke 35 mm / 1,378 Expansion 10 mm (0.394 ) Cutting head gear drive Pneumatic drive Electric drive 150 rpm off-load speed 70 rpm nominal speed. Approximate rotation speed according to air pressure and air flow 730 W, 6 bar (87 psi), 1400 l/min (49 cfm) 110 V (1500 W) or 230 V (1050 W) Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 18
10 US25A US25A/E US25B US25B/E US25C US25C/E US25 with pneumatic drive 0,73 kw and tool holder Ø 60 mm (2,3 ), weight ~ 4,4 kg/9,7 lbs US25 with electric drive and tool holder Ø 60 mm (2,3 ), weight ~ 6,4 kg/14,1 lbs US25 with pneumatic drive 0,73 kw and tool holder Ø 90 mm (3,5 ), weight ~ 5,3 kg/ 11,7 lbs US25 with electric drive and tool holder Ø 90 mm (3,5 ), weight ~ 6,5 kg/ 14,3 lbs US25 with pneumatic drive 0,73 kw and tool holder Ø 120 mm (4,7 ), weight ~ 5,3 kg/11,7 lbs US25 with electric drive and tool holder Ø 120 mm (4,7 ), weight ~ 6,5 kg/14,3 lbs US25E US25 ON-SITE: APPLICATIONS : TOOL HOLDER: 19
11 US25 OPTIONS : US25TA The TA option replace the tool holder of the USseries machines by a milling head. This option is designed to perform weld preps and to excavate membrane walls. Both operations, beveling and excavating, can be performed simultaneously. The machine is clamped inside the tube for a perfectly concentric clamping. US25TA US25TA for tube beveling and membrane removal, weight ~ 8,2 kg/18,1 lbs US25TA-PPF Milling cutter for the US25TA - One milling cutter per diameter is necessary. Please submit a drawing on order. US25TP The US-TP series are full automatized beveling machines integrating the clamping mandrel and the tool holders of the US Series. The clamping and the feed are automatic and adjustable. The US-TP series are suited for serials jobs on heat exchangers (tubes cut to length, weld joint extraction, beveling works.). US25-EMA US25TP US25TP Tube beveling machine for tube panels, mm ID. This new generation of elbow mandrel assembly allows the positioning of a UStype machine on all types of elbows. Its concentric adjustment is due to the rules located around the system, this leads to a high quality weld-end preparation on all types of elbows and materials including stainless steel and high nickel alloys. US25-EMA US25-EMA US25-EMA US25-EMA elbow mandrel assembly for US25 (40-64 mm) US25-EMA elbow mandrel assembly for US25 (64-90 mm) US25-EMA elbow mandrel assembly for US25 ( mm) US25ACC This flange attachment allows to resurface all the different flanges welded on pipes, of all materials, directly on site or in the workshop. This system is reliable, accurate, rigid, lightweighted and very easy to use and operate. The clamping is made directly inside the flange ID via the clamping shaft of the US machines and their additional expansion blades or with a spider elbow mandrel kit. US25-ACC US25-ACC-BR US25 with flange facing attachment for flange diameters up to 280mm (11 ), weight ~ 15,0 kg/33,1 lbs US25-ACC-BR flange resurfacing module for US25 ( mm) 20
12 US25 US25-K01 US25-K01 US25-K04 US25-K05 US25-K06 US25-K07 Transport box for US25 with pneumatic drive Transport crate for US25 with electric drive Transport case for US25E with option US Wooden crate for US25CA Wooden crate for US25TA or US25ACC US25 Mandrel VISUAL US25-OM1 US25-OM1: mandrel from 12,5 mm (0,492 ) ID up to 18 mm (0,709 ) ID US25-OM2 US25-OM2: mandrel from 18 mm (0,708 ) ID up to 26 mm (1,024 ) ID US25 Tool holder US25 Other options VISUAL US25-19 Tool holder 60 mm (2,362 ) VISUAL US25-1 US25-2 US25-1 Quick lever clamping device US25-2 Handwheel clamping device US25-12 Tool holder 90 mm (3,543 ) US25-5 US25-6 US US25-5 Right angle feed with lever US25-6 Ratchet clamping device US Feed and clamping through ratchet US25-21 Tool holder 120 mm (4,724 ) 21
13 US25CA US25CA Ø mm ( ) 6 kg 13.2 lbs : US25CA Beveling US25 with automatic clamping system and manual feed lever, tool holder Ø 90 mm (3,5 ), weight ~ 7,8 kg/17,2 lbs Cutting Facing Counterboring Surfacing US25CA ON-SITE : US25 with automatic clamping DIMENSIONS : TECHNICAL FEATURES Machine US25CA Machining Capacity Clamping capacity 25 mm (0.984") 90 mm (3.543) 25 mm (0.984") 87.5 mm (3.425) Specific shapes & angles Facing, 30, 37 30, 45 bevel, counterbore, J-bevel, others on request Clamping manual Feed stroke 21 mm (0.827 ) Cutting head gear drive 300 rpm off-load speed 150 rpm nominal speed Pneumatic drive Weight 370 W, 6 bar (87 psi) 350 l/min (12 cfm) 6 kg (13.2 lbs) Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 22
14 US25 TOOL BITS VISUAL US25-TIH-30 US25-TIH-30 Insert holder 30 for US25 O-US-A1-6-H-18 Facing 90 US25-TIH-37.5 US25-TIH-30 Insert holder 37,5 for US25 O-US-A2-6-H beveling US25-TIH-45 US25-TIH-30 Insert holder 45 for US25 O-US-A3-6-H beveling US25-TIH-90 US25-TIH-90 Insert holder 90 for US25 O-US-A4-6-H counterboring US25-TIH-S US25-TIH-S screw for tool insert O-US-B6-6-H-55 Notched tool bit for facing O-US-P1-6-H-T Tool Holder for US25 O-US-B7-6-H-57 Notched tool bit for 30 beveling O-US-B8-6-H-58 O-US-P2-6-H-T Tool Holder for US25 Notched tool bit for beveling O-US-B9-6-H counterboring O-US-B116-H-24 Facing and counterboring O-US-C5-6-H-62 J-bevel 7 with radius 6 O-US-C6-6-H-64 J-bevel 12,5 with radius 6 O-US-C8-6-H-68 J-bevel 12,5 with radius 6 O-US-C9-6-H-20 J-bevel 10, with radius 1,5 O-US-P1-DUPLEX-30 O-US-P2-DUPLEX-0 VISUAL Tool Holder for US25 Tool Holder for US25 23
15 US30CH US30CH Ø mm ( ) : 10 kg 22 lbs The US30CH portable pipe beveling machine is robust, reliable, versatile and light weighted The standard tool plate will accept multiple tool bits, allowing up to 4 simultaneous machining operations. Such operations may include : 30, 37 30, 45 bevels, J-bevels, compound bevels, facing, counterboring, OD chamfering, removal of weld joints and/or lengthening of tubes on tube sheets. The tool bits can be changed and adjusted very quickly. Carbide tool inserts can alternatively be used. The US30-CH features a self-accepting torque system and an integral drive motor. This very powerful pipe beveler will perform repeatable high quality weld preparations on all types of materials including mild, chrome, stainless steel, duplex, super duplex, copper-nickel alloy steel, inconel, P91, aluminium, copper and virtually all exotic alloys. US30-CH with pneumatic drive Beveling Cutting Facing Counterboring Surfacing DIMENSIONS : TECHNICAL FEATURES Machine Machining Capacity Specific shapes & angles US30CH Standard model: 32 (1,259 ) mm ID 114,3 (4,500 ) mm OD With options: (Kit6 ) 12.5 mm (0,492 ) ID 168 mm (6,614") OD Flange facing 50 mm (1.968") ID 355 mm ( ) OD I, V, J, X compound bevels, removal of weld joints, counterboring. - Special shape on request Clamping manual with key Feed stroke 35 mm / 1,378 Expansion 9 mm (0.394 ) Cutting head gear drive Pneumatic drive Electric drive Up to 30 rpm 730 W, 6 bar (87 psi), 1400 l/min (49 cfm) 1050 W, 230 V or 110 V Hydraulic drive on request. Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 24
16 US30CH US30CH/E US30CH/CA US30CH/HY US30CH-ASB US30CH- EMA US30-CH with pneumatic drive and tool holder Ø 130mm (5.118 ), weight ~ 10 kg/22 lbs US30-CH/E with electric drive and tool holder Ø 130 mm (5.118 ), weight ~ 10 kg/ 22 lbs US30-CH/CA with pneumatic drive and automatic clamping, weight ~ 10,0 kg/ 22 lbs US30-CH/HY with hydraulic drive, weight ~ 10,0 kg/ 20 lbs Flange facing attachment, for the resurfacing or worn or damaged surfaces with diameter 50 mm ID up to 355 mm OD 2 up to 14 Elbow mandrel assembly for US30CH ( mm) US30CH/E US30CH ON-SITE : APPLICATIONS : OPTIONS : TOOL HOLDER: US30CH-ACC-BR US30-CH-Kit6" US30-CH-K06 US30-CH/E-Kit6 US30-OPT.2-KIT6 US30-LEV US30-OPT.5 US30CH-K01 US30CH-K02 US30CH-K03 US30CH-K07 Flange resurfacing module ( mm) US30-CH beveling machine with pneumatic drive for diameters up to 168 mm (6,614 ) OD, delivered with 1 tool holder plate Ø180 mm (7,087 ) US30-CH-K06 crate for US30CH pneumatic drive and Kit6" US30-CH beveling machine with electric drive for diameters up to 168 (6,614 ) mm OD, delivered with 1 tool holder plate Ø180 mm (7,087 ) Special accessories - for diameter up to 168 mm Quick lever clamping device Bench mounting device Transport case for US30CH Wooden transport crate for US30CH-E Wooden transport crate for US30CH/ CA Wooden crate for US30 right angle electric drive and Kit6 25
17 US30CH/CA US30-CH/CA Ø mm ( ) : 10 kg 22 lbs US30-CH/CA US30-CH/CA with pneumatic drive and automatic clamping, weight ~ 10,0 kg/ 22 lbs Beveling Cutting Facing Counterboring Surfacing US30CH/CA ON-SITE : US30-CH/CA with pneumatic drive DIMENSIONS : TECHNICAL FEATURES Machine Machining Capacity Specific shapes & angles US30-CH/CA 32 mm (1.181 ) ID mm (6.626 ) OD Facing, 30, 37 30, 45 bevel, counterbore, J-bevel, others on request Clamping manual with key Feed stroke 35 mm (1.378 ) Cutting head gear drive Pneumatic drive Weight Up to 30 rpm 730 W, 6 bar (87 psi) 1400 l/min (49 cfm) 10 kg (22 lbs) Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 26
18 US40 US40CA Ø mm ( ) : 15 kg 33 lbs The portable US40 portable tube and pipe beveling machine is powerful, robust, reliable and versatile. The US40 covers diameters ranging from 43 mm (1,693 ) ID to 219 mm (8,622 ) OD. The standard tool plate will accept multiple tool bits, allowing up to 4 simultaneous machining operations which may include 30, 37 30, 45 bevels with or without land, J-bevels, compound bevels, facing, counterboring works, removal and/or lengthening of weld joints on boiler panels. The tool bits can be changed and adjusted very quickly. Carbide tool inserts can alternatively be used. The US40 features a self-accepting torque system and an integral drive motor. It can be either pneumatically or electrically or hydraulically driven. The PROTEM US40 will perform repeatable high quality weld preparations on all types of materials including mild, chrome, stainless steel, duplex, super duplex, copper-nickel alloy steel, inconel, P91, aluminium, copper and exotic alloys. US40 with pneumatic drive DIMENSIONS VIEW 1 : Beveling Cutting Facing Counterboring Surfacing TECHNICAL FEATURES Machine Machining Capacity Specific shapes & angles US40 Standard model: 43 mm (1.693 ) ID 219 mm (8.622 ) OD With options: 43 mm (1.693 ) ID 400 mm ( ) OD Facing, 30, 37 30, 45 bevel, counterbore, J-bevel, others on request Clamping Manual with ratchet DIMENSIONS VIEW 2 : Feed stroke 50 mm (1.969 ) Expansion 16 mm (0.630 ) Cutting head gear drive Pneumatic drive 25 rpm off-load speed, 16 rpm nominal speed (Approximate rotation speed according to air pressure and air flow) 730 W, 6 bar (87 psi), 1400 l/min (49 cfm) Electric drive 1050 W, 230 V or 110 V Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 27
19 US40 US40 US40 with pneumatic drive 730 W, weight ~ 14,0 kg/ 30,9 lbs US40E US40 with electric drive 1200 W, weight ~ 15,0 kg/ 33,1 lbs US40E US40CA US40CA with pneumatic drive and automatic clamping, weight ~ 15,0 kg/ 33,1 lbs US40HY US40 with hydraulic drive (without control valve), weight ~ 21 kg/ 46,3 lbs US40HY-SDV US40 with hydraulic drive (with control valve), weight ~ 21 kg/ 46,3 lbs US40CH US40CH Pipe beveling machine for boilers works for mm US40 SUR SITE : APPLICATIONS : OPTIONS : US40-IDT US40-PO-36 US40-KS.S1 O-US-SO ID-Tracker: enables the US40 to maintain a constant root land thickness independently of the pipe ovality or wall thickness variations. With the inside profile tracker option the machining capacity is limited. For any question, please contact PROTEM Commercial Department US40-PO-36 additional tool holder US40-KS.S1 Cam for simple bevel O-US-SO Tool insert holder 20 - root lip 2 mm O-US-SO O-US-SO Tool insert holder 5 US40-ASB US40-KS65 : US40-KS.S US40-OPT5 US40-PO-10" Flange facing attachment, for flange diameters ranging from 70 mm ID up to 400 mm OD (2,756 15,748 ) Copying carriage Cam for compound bevel and compatible with copying carriage Machine support Tool holder for diameter up to 273 mm (10") OD 28
20 US40CA US40CA Ø mm ( ) : 15 kg 33.1 lbs US40CA US40CA with pneumatic drive and automatic clamping, weight ~ 15,0 kg/ 33,1 lbs Beveling Cutting Facing Counterboring Surfacing US40CA with pneumatic US40CA ON-SITE : DIMENSIONS : TECHNICAL FEATURES Machine US40CA Machining Capacity Specific shapes & angles Clamping 43 mm (1.693 ) ID 219 mm (8.622 ) OD Facing, 30, 37 30, 45 bevel, counterbore, J-bevel, others on request Manual with key Feed stroke 16 mm (0.630 ) Cutting head gear drive Pneumatic drive Weight 25 rpm off-load speed 16 rpm nominal speed 730 W, 6 bar (87 psi) 1400 l/min (49 cfm) 15 kg (33.1 lbs) Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 29
21 US80 US80 Ø mm ( ) : 40 kg 88.1 lbs The US 80 portable tube and pipe heavy duty beveler combines robustness, reliability, efficiency and versatility in one machine providing a safe and easy use for all operators. The standard tool plate will accept multiple tool bits, allowing up to four simultaneous machining operations. Such operations may include 30, 37 30, 45 bevels with or without land, J-bevels, compound bevels, facing, counterboring works etc.. The US80 heavy duty beveler will perform repeatable high quality weld preparations on all types of materials including mild, chrome, stainless steel, duplex, super duplex, copper-nickel alloy steel, inconel, P91, aluminium, copper and exotic alloys. It can be either pneumatically or electrically or hydraulically driven. The tool bits can be changed and adjusted very quickly. Carbide tool inserts can alternatively be used. Beveling Cutting Facing Counterboring Surfacing US80 with pneumatic drive DIMENSIONS VIEW 1 : TECHNICAL FEATURES : Machine Machining Capacity Specific shapes & angles Clamping US80 Standard model: 80 mm (3.149 ) ID mm (14 ) OD With options: 80 mm (3.149 ) ID 610 mm (24 ) OD Facing, 30, 37 30, 45 bevel, counterbore, J-bevel, others on request Manual with key DIMENSIONS VIEW 2 : Feed stroke 60 mm (2,362 ) Expansion 25 mm (0.984 ) Cutting head gear drive Drive Power 16 rpm off-load speed, 11 rpm nominal speed Pneumatic, hydraulic or electric Single pneumatic drive 1,47 kw, 6 bar (87 psi), 1800 l/ min (63 cfm) Dual pneumatic drive 2 x 1,47 kw, 6 bar (87 psi), 2 x 1800 l/min (2 X 63 cfm) Electric drive 2200 W Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 30
22 US80ASB US80 US80 with pneumatic drive 1,47 kw, weight ~ 40 kg/ 88,18 lbs US80D US80 with dual pneumatic drive, weight ~ 40 kg/ 88,18 lbs US80HY US80E US80 with dual hydraulic drive (without control valve), weight ~ 40 kg/ 88,18 lbs US80 with electric drive, weight ~ 40 kg/ 88,18 lbs US80HY-DV US80HY-SD US80HY-SDV US80DSB-HY-DV US80 with dual hydraulic drive (with control valve), weight ~ 40 kg/ 88,18 lbs US80 with single hydraulic drive (without control valve), weight ~ 40 kg/ 88,18 lbs US80 with single hydraulic drive (with control valve), weight ~ 40 kg/ 88,18 lbs US80 DSB-HY-DV Beveling machine with dual hydraulic drive, regulation valve and dual bearing (higher accuracy) for mm US80 ON-SITE : OPTIONS : US80-BOGEspe Elbow Mandrel Assembly for diameters mm (3.9 ID 7 OD) US80-kit16 US80-kit16 Additional kit for diameter up to 16 US80-ASB Flange facing attachment, capable of resurfacing worn or damaged weld neck type flanges with diameter 100 mm ID up to 610 mm OD (3.9 ID 24 OD) Elbow Mandrel Assembly US80-IDT ID-Tracker: enables the US80 to maintain a consistent root land thickness independently of the pipe ovality or wall thickness variations. US80-KS75 : Copying carriage feed 75 mm (2.9 ) US80-KS.S Cam for compound bevel US80-KS.S1 US80-KS.S1 Cam for simple bevel US80-OPT.5 Bench support for US80 US80-K01 US80-K02 US80-KS75-K1 US80-ASB-K01 Crate for US80 US80-K02 transport crate for US80E US80-KS75-K1 transport crate for copying carriage for US80 US80-ASB-K01 transport crate for US80- ASB US80-ASB-EMA1 US80-ASB-EMA2 Spider type elbow mandrel kit for easy installation into the flange or tube. Capacity: 100 to 180 mm ID (3.9 7 ID) Clamping spider for elbows. Allows an easy set up in tube, pipe or flange Capacity : 170 à 356 mm ID (3.9 7 ID) 31
23 US150 US150 Ø mm ( ) : 90 kg 198 lbs The US150 heavy duty beveler is a robust and portable machine allowing to perform repeatable, high quality weld end preparation works on metal pipes including mild, chrome, stainless steel, duplex, super duplex, coppernickel alloy steel, inconel, P91, aluminium, copper and exotic alloys. The US 150 covers diameters ranging from 150 mm (5,906 ) ID to 508 mm (20 ) OD. This machine can also be delivered with its 610 mm (24 ) tool holder plate. It can be either pneumatically or electrically or hydraulically driven. The standard tool plate will accept multiple tool bits, allowing up to four simultaneous machining operations. Such operations may include 30, 37 30, 45 bevels with or without land, J-bevels, compound bevels, facing, counterboring works etc.. The tool bits can be changed and adjusted very quickly. Carbide tool inserts can alternatively be used. Easy to use, robust and versatile, the US 150 will allow you to optimize your tube and pipe welding preparations! US150 with pneumatic drive DIMENSIONS VIEW 1 : Beveling Cutting Facing Counterboring Surfacing TECHNICAL FEATURES Machine US150 Standard model: 150 mm (5.906 ) ID 508 mm (20 ) OD Machining Capacity With options: 150 mm (5.906 ) ID 920 mm ( ) OD DIMENSIONS VIEW 2 : Clamping capacity Specific shapes & angles Clamping 150 mm (5.906 ) ID 508 mm (20 ) OD Facing, 30, 37 30, 45 bevel, counterbore, J-bevel, others on request Manual with key Feed stroke 100 mm (3.937 ) Expansion 30 mm (1.181 ) Cutting head gear drive Drive Power 10 rpm off-load speed, 7 rpm nominal speed Pneumatic, hydraulic or electric Dual pneumatic drive 2 x 1.47 kw, 6 bar (87 psi), 2 x 1800 l/min (2 X 63 cfm) Electric drive 2200 W Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 32
24 US150 US150 with pneumatic drive: standard version with dual pneumatic drive 2 x 1,47 kw, weight ~ 85 kg/ 187,4 lbs US150E US150 with electric drive 2800 W, weight ~ 145kg/ 319,7 lbs US150HY US150 with dual hydraulic drive, weight ~ 95 kg/209,4 lbs US150 E US150HY-SD US150DSB US150DSB-HY-SD US150DSB-HY US150 with single hydraulic drive, weight ~ 88 kg/194 lbs US150DSB Beveling machine with dual pneumatic drive and dual bearing.higher accuracy. For options US150- ASB, US150-KS75-30, US150-KS75-36, weight ~ 90 kg/ 198,4 lbs US150DSB-HY-SD Beveling machine with single hydraulic drive and dual bearing + regulation valve. Higher accuracy. For options US150-ASB, US150-KS75-30, US150- KS75-36 US150DSB-HY Beveling machine with dual hydraulic drive and dual bearing + regulation valve.higher accuracy. For options US150-ASB, US150-KS75-30, US150-KS75-36 US150-24" US150HY-SD-24" US150HY-24 US150DSB-24" US150DSB-HY- SD-24 US150DSB-HY-24 US150-24" Beveling machine with dual pneumatic drive and 24" kit US150HY-SD-24" Beveling machine with single hydraulic drive and 24" kit US150HY-24" Beveling machine with dual hydraulic drive and 24" kit + regulation valve US150DSB-24" Beveling machine with dual pneumatic drive and dual bearing.higher accuracy. For options US150-ASB, US150- KS75-30, US150-KS75-36 US150DSB-24" Beveling machine with dual pneumatic drive and dual bearing.higher accuracy. For options US150-ASB, US150- KS75-30, US150-KS75-36 US150DSB-HY-SD-24 Beveling machine with single hydraulic drive and dual bearing + regualtion valve.higher accuracy. For options US150-ASB, US150-KS75-30, US150- KS75-36 Coating Removal The US ID Clamping Beveling Machines can be equipped with optional accessories capable of machining the plastic coating of pipe, up to 130 mm (5 ) wall thickness. All maintenance operations (cutting and beveling) can be performed at any place along the pipeline, removing the coating to provide space for the welding equipment. Heating the coating at high temperature and removing it manually with a blade, or using machines with a waterjet cutting system (which damages the pipes) is no longer necessary. The machining of the coating with PROTEM equipment is the ideal solution. PROTEM offers you professional solutions to perform machining operations on the job site safely, while getting perfect results. 33
25 US150 OPTIONS : Flange Facing Attachments US150-ASB Flange facing attachment, for the remachining and resurfacing of worn or damaged flanges with diameters ranging from 165 mm ID up to 900 mm OD (6.5 ID 35.4 AD) Kit 24 US150-Kit 24 Kit 24 for the US150: tool holder plate for diameters up to 24 ; has to be ordered with a special crate. Kit for Elbow US150-EMA Elbow mandrel assembly for US150; diameters: 261 mm 508 mm OD (10, OD) US150-ASB-EMA1 Clamping spider for elbows. Allows an easy set up in tube, pipe or flange Capacity : 170 to 356 mm ID (6.700 to ID) US150-ASB-EMA2 Clamping spider for elbows. Allows an easy set up in tube, pipe or flange Capacity : 400 to 620 mm ID ( to ID) Copying carriage US150-KS75-30 US150-KS75 copying carriage, stroke 75 mm up to 30 O.D. - Recommended with US150 DSB type machine. Incrementation via star wheel. Machining by copying via template/ cam. US150-KS75-36 US150-KS75 copying carriage, stroke 75 mm up to 36" O.D. Recommended with US150 DSB type machine. Incrementation via star wheel. Machining by copying via template/ cam. 34
26 OPTIONS : Bench support US150-OPT.5 Bench support for US150 ID-Tracker US150-IDT ID-Tracker: enables the US150 to maintain a consistent root land thickness independently of the pipe ovality or wall thickness variations. Spider US150-SPY-20-30'' Spider assembly ranging from 20" to 30" (to be used with copying / flange facing carriages US150-KS75-30 and US150ASB US150-SPY-20-36'' Spider assembly ranging from 20" to 36" (to be used with copying / flange facing carriages US150-KS75-36 and US150ASB US150-KS.S US150-KS.S Cam for compound bevel or J-bevel (for bevel profile - 75 mm long - 40 mm high). Used with options US150- KS75-30 and US150-KS75-36 US150-KS.S1 US150-KS.S1 Cam for simple bevel (for bevel profile - 75 mm long - 40 mm high). Used with options US150-KS75-30 and US150-KS75-36 US150-K01 crate for US150 US150-K02 Crate for US150 with kit 24 35
27 US450 US450 Ø mm (18-56 ) : Ultimate end machining solution for tubes and pipes with diameters ranging from 457mm (18 ) to mm (56 ) for numerous applications. Very powerful, versatile and reliable heavy duty beveler for demanding weld end preparation applications. Unique capabilities for construction, inspection and repair works on site or in the assembly workshop. Strong ID clamping mandrel provides a safe and secured mounting and fixing Cold machining process No heat affected zone! For unmatched results! Available with dual pneumatic drive or dual hydraulic drive (to be used with a 22KW hydraulic power unit). The durability, reliability and capacity of the US450 earned this machine the excellent reputation it enjoys wherever it is used in the world. US450 with pneumatic drive DIMENSIONS VIEW 1 : DIMENSIONS VIEW 2 : Beveling Cutting Facing Counterboring Surfacing TECHNICAL FEATURES Machine Machining Capacity Clamping capacity Specific shapes & angles Clamping US450 Standard model: 457 mm (18 ) ID 920 mm ( ) OD With options: 457 mm (18 ) ID 1524 mm (60 ) OD 420 mm ( ) ID 920 mm ( ) OD Facing, 30, 37 30, 45 bevel, counterbore, J-bevel, others on request Manual with key Feed stroke 98 mm (3.858 ) Expansion 52 mm (2.047 ) Cutting head gear drive Drive Power 5-6 rpm nominal speed Pneumatic or hydraulic Dual pneumatic drive 2 x 2.3 kw, 6 bar (87 psi), 2 x 3100 l/min (2 x 109 cfm) 2 x hydraulic drives (recommended HPP: 22 kw) Pneumatic driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 36
28 US450 Beveling machine delivered with tool holder plate and 2 tool holders, one set of basic blades and one set of contact touch (1312) and dual pneumatic drive To cover the complete range of the machine additional jaws / pads (1311, 1313, 1314, 1315, 1316) are needed. For diameter mm. US450HY Beveling machine delivered with tool holder plate and 2 tool holders, one set of basic blades and one set of contact touch (1312) and dual hydraulic drive To cover the complete range of the machine additional jaws / pads (1311, 1313, 1314, 1315, 1316) are needed. For diameter mm. US450HY-KIT56" Beveling machine delivered with tool holder plate and 2 tool holders, one set of basic blades and one set of contact touch (1312)and dual hydraulic drive To cover the complete range of the machine additional jaws / pads ( 1313, 1314, 1315, 1316,1353,1355) are needed. US450HY OPTIONS : US450-K01 Transport crate for US450 US450-KS-K01 Transport crate for copying carriage for US450 US450-OPT.5 Bench support for US450 US450-IDT US450-ODT US450-KS.S US450-KS.S1 US450-KS75 US US US US US ID-Tracker: enables the US450 to maintain a consistent root land thickness independently of thepipe ovality or wall thickness variations US450-ODT OD-Tracker US450-KS.S Cam for compound bevel or J-bevel US450-KS.S1 Cam for simple bevel Copying carriage Set of 3 additional jaws (from 668 mm ID to 920 mm ID) Pad height 25 mm set of 6 pieces Pad height 50 mm set of 6 pieces Pad height 75 mm set of 6 pieces Pad height 100 mm set of 6 pieces US450 with Hydraulic drive ID MOUNT : DUAL HYDRAULIC DRIVES 37
WORLD LEADING MACHINING SOLUTIONS
BEVELING PIPE FACING TUBE SEVERING FLANGE FACING TUBE SQUARING ORBITAL CUTTING WORLD LEADING MACHINING SOLUTIONS COUNTERBORING CUTTING BENCHES BEVELING BENCHES PIPELINE MACHINERY WELDING PREPARATION SINGLE
More informationPROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES
PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES US-40 PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax:
More informationUS80 ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE
TUBE AND PIPE BEVELING MACHINE ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com
More informationLCSF Low Clearance Split Frame
Designed For Portability And Limited Clearance Full Range 2in - 48in for Pipe and Tube Optional Bridge Slide for Heavy Wall Pipe EXTERNALLY MOUNTED PORTABLE PIPE CUTTING AND BEVELING SYSTEM E.H. Wachs
More informationSPLIT FRAME CUTTING & BEVELING MACHINES
SPLIT FRAME CUTTING & BEVELING MACHINES 1-48 WWW.BBPIPETOOLS.COM 713-747-8502 B&B Pipe & Industrial Tools 527 Michigan St South Houston, TX 77587 SPLIT FRAME CUTTING & BEVELING Portable O/D Locking Cold
More informationIndustrial. Pipe Cutting and Beveling Products. > 10/2011 European Catalogue. precision. power. simplicity.
Industrial Pipe Cutting and Beveling Products. > 10/2011 European Catalogue EN precision. power. simplicity. Superior Equipment. Portable Milling Machines Trav-L-Cutter The WACHS Trav-L-Cutter is a portable
More informationSPLIT FRAMES CLAMSHELLS ORBITAL TUBE AND PIPE CUTTING AND BEVELLING MACHINES TT
ORBITAL TUBE AND PIPE CUTTING AND BEVELLING MACHINES TT TTNG TTNG ORBITAL TUBE AND PIPE CUTTING AND BEVELLING PORTABLE PIPE SEVERING! MACHINES LIGHT WEIGHT VERSATILE RELIABILITY SAFE USE UNDER ALL CONDITIONS
More informationAPPLICATION RANGE FEED STROKE FREE SPEED TORQUE mm 25 mm 100 Rpm 140 Nm. 300,0 mm. Body height: 13, mm 25 mm 100 Rpm 2,0 4,0 1,0
PanelMill F-35 The PanelMill attaches to the tube outside diameter by means of custom or specific clamp type jaws that provide strong clamping action that minimizes chatter and vibration. This rugged construction
More information- Clamshell - OD-Mounted Pipe Cutting and Beveling Machine. Split frame. cutting and beveling simultaneously
Split frame OD-Mounted Pipe Cutting and Beveling Machine The series machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine to split in half
More informationDrilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
More informationTRAV-L-CUTTER Pipe Cutter
TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs
More information200SERIES ID MOUNT PIPE BEVELING EQUIPMENT
200SERIES ID MOUNT PIPE BEVELING EQUIPMENT Tri Tool manufactures the finest portable beveling machines that deliver maximum precision, reliability and performance Model 214B 2 BEVELING WELD END PREPARATION
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationOrbital Milling. A Buyers Guide.
A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising uptime and improving
More informationCelebrating. 65 Years
Celebrating 65 Years Contents Beveling Equipment Clamps - Internal Clamps - External Auxiliary Equipment Pipe Lifting Welding Qualification Pipe Bending Beveling Equipment On Band Type Beveling Machine:
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS MODEL PBM-6000 BEVELING MACHINE REV 8/2011 USA Otto Arc Systems, Inc. (Corporate/Sales/Mfg. Division) 3921 Sandstone Drive El Dorado Hills, California 95762 Phone: (916) 939-3400
More informationProducing weld preparations is done in seconds
P.O. Box 5, NL 6580 AA MALDEN Th. WORTELBOER B.V. HOLLAND phone +31 24 358 65 14 fax +31 24 358 70 79 www.wortelboer.ws Producing weld preparations is done in seconds NEW MODELS 2011/2013 PBM PIPE END
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS MODEL TSM-6000 FACING/SQUARING MACHINE REV 8/2011 USA Otto Arc Systems, Inc. (Corporate/Sales/Mfg. Division) 3921 Sandstone Drive El Dorado Hills, California 95762 Phone: (916) 939-3400
More informationFF Flange Facer. Lathe quality surface finish. Based on powerful SDB end prep platform. Convertible to SDB series end prep
FF Flange Facer Lathe quality surface finish Based on powerful SDB end prep platform Convertible to SDB series end prep Fast, Easy Setup Self-Centering Design Now anyone can produce a lathe quality surface
More informationvariety of cuts including chamfers, O-Ring grooves, lens rings and other angular surfaces.
FF6300 FLANGE FACER 6 2015 FF63 Performance. Versatility. Safety. The rigid and versatile FF6300 delivers high-torque performance to quickly re-face flanges and repair sealing and bearing surfaces efficiently
More information300and500SERIES SQUARING AND SEVERING EQUIPMENT
300and500SERIES SQUARING AND SEVERING EQUIPMENT 1 Tri Tool produces the finest tube severing and squaring machines delivering maximum precision and performance Contents Portable Tube Equipment Solutions...
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationFF6300 FLANGE FACER 2016 FF63
FF6300 FLANGE FACER 11 2016 FF63 Performance. Versatility. Safety. The rigid and versatile FF6300 delivers high-torque performance to quickly re-face flanges and repair sealing and bearing surfaces efficiently
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS MODEL PBM-4500 BEVELING MACHINE REV 8/2011 USA Otto Arc Systems, Inc. (Corporate/Sales/Mfg. Division) 3921 Sandstone Drive El Dorado Hills, California 95762 Phone: (916) 939-3400
More informationSplit Frame Clamshells
Split Frame Clamshells 600 Series Pipe Severing and Beveling Equipment TRI TOOL INC. Visit Tri Tool's website... www.tritool.com for the latest news and product info! P O R T A B I L I T Y P R E C I S
More informationPRO-10PB PORTABLE PIPE BEVELLER
PRO-10PB PORTABLE PIPE BEVELLER OPERATOR S MANUAL BEFORE USE, ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL. Serial #... Date of Purchase...
More informationPortable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel PORTABLE HACKSAWS Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationALFRA. Deburring Technology. Bevel Milling and Deburring Devices for the universal use B/79
ALFRA B Deburring Technology Bevel Milling and Deburring Devices for the universal use B/79 ALFRA Bevel Milling and Deburring Devices Overview Made in Germany by ALFRA Page B/84 Page B/86 Type KFV KFH
More informationTOOLS AND INSTALLATION
TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and
More informationOTTO ARC HIGH PERFORMANCE
HIGH PERFORMANCE OTTO ARC www.ottoarc.com ORBITAL WELDING ORBITAL WELDING ORBITAL WELD VELING BEVELING BEVELING BEVELING BEVELING RING SQUARING SQUARING SQUARING SQUARING S OTTO ARC SYSTEMS, INC SUMMER
More informationPortable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable cutting of
More informationMC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding
MC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding Ex GST Inc GST $5,590.00 $5,290.00 $6,149.00 $5,819.00 Special
More informationFERROUS AND NON-FERROUS MATERIAL
Aluminum Cutting Small Material Large Material Brush Deburring Compound Angles In and Outside Deburring FERROUS AND NON-FERROUS MATERIAL MADE IN GERMANY H350 & H450 For production cutting of mild steel
More informationT A G PIPE ALIGNMENT CLAMPS PIPE EQUIPMENT SPECIALISTS LTD WB ALLOY WELDING PRODUCTS LTD WB ALLOY WELDING PRODUCTS LTD
WB ALLOY WELDING PRODUCTS LTD T A G PIPE EQUIPMENT SPECIALISTS LTD PIPE ALIGNMENT CLAMPS WB ALLOY WELDING PRODUCTS LTD E-Z FIT RED Pipe welding clamp 1-12 o/d Quick and E-Z to use Rugged frame, built for
More informationHIGH THROUGHPUT MINIMUM SET-UP TIME BT-Z LARGE BAR PEELERS
UPDATE ON HETRAN BT-Z LARGE BAR PEELERS: MAXIMIZING PRODUCTIVITY IRRESPECTIVE OF ALLOY, BAR OR TUBE DIAMETER! Copyright September 2013 All Rights Reserved REVOLUTIONARY WORLD-CLASS DESIGN EXTENSIVE RANGE
More information300and500SERIES SQUARING AND SEVERING EQUIPMENT
300and500SERIES SQUARING AND SEVERING EQUIPMENT 1 Tri Tool produces the finest tube severing and squaring machines delivering maximum precision and performance Contents Portable Tube Equipment Solutions...
More informationKM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
More informationSpeed Wheel allows wedge expansion using a star-wheel, which is faster in confined spaces.
BG44 BOILER GUN 08 PIPE RANGE:.875 ID - 5 OD in (22.2 ID - 127.0 OD mm) 2017 BG44 The BG44 Boiler Gun is a combination of power, versatility and ease of use in a compact package. Designed to perform on-site
More informationFF3000 FLANGE FACER. Compact, lightweight, and easy to set up. 04 FF3
FF3000 FLANGE FACER 2014 04 FF3 Compact, lightweight, and easy to set up. Compact and Versatile Patented, low profile machine is one of the most compact on the market today. Lightweight, weighing only
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationCompact, lightweight, and easy to set up.
FF4000 FLANGE FACER 2014 04 FF4 Compact, lightweight, and easy to set up. Compact and Versatile Low profile machine is one of the most compact on the market today. Lightweight, weighing only 58 lbs (26.3
More informationCATALOGUE ORBITAL CUTTING & BEVELING. >> EN [ Rev. 1013] >> Orbital cutting & beveling machines for high-purity process piping
CATALOGUE >> EN [790 700 000 Rev. 1013] ORBITAL CUTTING & BEVELING >> Orbital cutting & beveling machines for high-purity process piping New products. BRB 2 FullAuto Boiler Pipe Preparation Machine The
More informationCADET Line Boring Machine And Accessories Catalogue
CADET Line Boring Machine And Accessories Catalogue Portable - Powerful - Flexible - Easy to Use 1 CADET Line Boring Machine This general use line boring machine is perfect for contractors who are concerned
More informationSERRATING / GROOVING TOOL - ST SERIES. Features : 1/8 x3/8 x1/8
3 1 8 2-2 SERRATING / GROOVING TOOL - ST SERIES FOR GROOVING IN TUBE SHEETS Tool 1/8 x 3/8 x 1/8 Spacing Spare Tool Bits 1/8 x 1/4 x 1/8 Spacing Special Spacing 9.53 3/8 ST-375-970 ST-3703 ST-3703-S ST-3703-SPEC
More informationCUTTING & BEVELING MACHINES TOOLS FOR HIGH PURITY PROCESS PIPING
CUTTING & BEVELING MACHINES TOOLS FOR HIGH PURITY PROCESS PIPING Contents About Orbitalum 1 Pipe Cutting and Beveling Machines GF 3 Pipe Cutting and Beveling Machines RA 6 Pipe Cutting and Beveling Machines
More informationV-Turn 410/ PRECISION LATHE
PRECISION LATHE Page 2. Highlights Page 3. Machine construction and feed system Page 3. Main spindle drive Page 4. Toolpost Page 4. Tailstock and auxiliary systems Page 5. 3 Axis Digital Read Out - X.pos
More informationPIPE EQUIPMENT SPECIALISTS LTD
PIPE EQUIPMENT SPECIALISTS LTD MACHINES CATALOGUE PIPE BEVELLING MACHINES PIPE COLD CUTTING AND BEVELLING MACHINES PLATE BEVELLERS PORTABLE OXY-FUEL CUTTING MACHINES Manual and Manual HD Magnetic Auto
More informationPrecision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
More informationS8M S7M. Soft Touch Buttons with LED Lights Soft Touch Buttons light up a LED once pressed - simplifying operation.
S8M surfacing machines Soft Touch Buttons with LED Lights Soft Touch Buttons light up a LED once pressed - simplifying operation. S8M with Large Diesel Block Solid Steel Way Guards Heavy duty sliding steel
More informationThis just may be the Rotary Transfer machine you ve been waiting for.
This just may be the Rotary Transfer machine you ve been waiting for. A Machine Like No Other T he new Eclipse 12-100 is a ground-up redesign of the famous Hydromat concept with all new components. It
More informationBevelling made easy. SKF AutoCUT EKF EKF EKF EDGE PROCESSING MACHINES
82 Bevelling made easy BDS offers a range of professional machines for easy and perfect processing of milling edges: For the preparation of welding seams with the fully automatic AutoCUT 500 or the manually
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationP225 STANDARD FEATURES OPTIONAL FEATURES
CIRCULAR COLD SAWS P225 Manually operated Robust sawing head miters 45 left Bench top model no base Single blade speed of 1 HP Manual vise Material work stop rod for multiple cuts of the same length Flood
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationModel PM Series Three Axis Mills
Model PM Series Three Axis Mills PM3000 PM2000 Features Setup & Operation Technical Data CLIMAX Portable Machine Tools, Inc. 10/98 1 Features Climax's PM Series 3-axis portable milling machines provide
More informationDrilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
More informationSTAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
More informationDrilling & Tapping Wide selection from a single source. Durable designs.
Drilling & Tapping Wide selection from a single source. Durable designs. Type No. of Models Nom. Size (in.) Page Hole Cutting Model HC300 3 Up to 3" 6.2 Model HC450 3 Up to 4 3 4" 6.3 Hole Saws 51 Up to
More informationSPLIT FRAME CLAMSHELLS
SPLIT FRAME CLAMSHELLS 600 Series Portable Pipe Severing, Beveling and Weld End Prep Equipment Tri Tool Inc. For more information visit www.tritool.com P O R T A B I L I T Y P R E C I S I O N R E L I
More informationOn-Site Machining Services Decommissioning Services In-Situ Portable Machine Rental Machining & Fabrication Services Machining & Project Management
On-Site Machining Services Decommissioning Services In-Situ Portable Machine Rental Machining & Fabrication Services Machining & Project Management Subsea Decommissioning Services Mactech Europe - At a
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationModel 204B-EM Elbow Mandrels Rev TABLE OF CONTENTS
92-0697 Rev. 970131 Model 204B-EM Elbow Mandrels TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 MAINTENANCE 7 OPERATION 8 TROUBLE SHOOTING 11 ACCESSORIES
More informationPipe Cutting and Beveling Machines GF 4 (AVM/MVM) Training. precision. power. simplicity.
precision. power. simplicity. Pipe Cutting and Beveling Machines GF 4 (AVM/MVM) Training Ehemals / formerly known as Georg Fischer Rohrverbindungstechnik Content 1 Basics 3 2 Range of application 11 3
More informationCATALOGUE ORBITAL CUTTING & BEVELING. >> EN [ Rev. 0515] >> Orbital cutting & beveling machines for high-purity process piping
CATALOGUE >> EN [790 700 000 Rev. 0515] ORBITAL CUTTING & BEVELING >> Orbital cutting & beveling machines for high-purity process piping New products. GFX 6.6 Pipe Cutting and Beveling Machine New, innovative
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationPress Release. Cutting and beveling pipes: Wachs and Orbitalum are ideal partners. Powerful assistance for manufacturing, repair and maintenance
Press Release Singen, 13 May 2013 Cutting and beveling pipes: Wachs and Orbitalum are ideal partners Powerful assistance for manufacturing, repair and maintenance Innovative, high-quality, durable, portable,
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationFeatures. Reduced Floor Space Compact, one piece castings and multi layer slideway guards give the most compact surfacing machines available today.
The S8A is designed to surface large diesel heads, blocks and manifolds. All SA machines use the same tooling and fixturing for quick, rigid setup and versatility. Fine surface finishes are easily obtained
More informationSA SERIES SURFACING MACHINES
SA SERIES SURFACING MACHINES The S8A is designed to surface large diesel heads, blocks and manifolds. All SA machines use the same tooling and fixturing for quick, rigid setup and versatility. Fine surface
More informationPLASTIC PIPE WELDING PLASTIC PIPE WELDING
PLASTIC PIPE WELDING PLASTIC PIPE WELDING Plastic Pipe Welding Electric sleeve welding unit 222 Sleeve welding units 223 Butt welding machines 224 Butt welding units 228 REMS EMSG 160 Electric sleeve welding
More informationCM6200 MILLING MACHINE
CM6200 MILLING MACHINE PORTABLE ON - SITE MACHINING SOLUTIONS FOR LARGE FLANGE MACHINING Quality Machine Design Provides Rigid, Power-Packed Performance Extraordinarily rigid design ensures consistent,
More informationSPECIALIZED WATCH MAKING TOOLS 03 2 LATHES RIVETING STAKES 03 20
03 SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES 03 12 RIVETING STAKES 03 20 SPECIALIZED WATCH MAKING TOOLS i Tools for locking/unlocking oscillating weight bolts. S Cal. 2892 and 7750 For calibres Base holder
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationBlower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationHeavy Equipment Solutions
Heavy Equipment Solutions Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and
More informationBG38 BOILER GUN PIPE RANGE: 0.625" ID - 3" OD (12.7 ID OD mm)
BG38 BOILER GUN PIPE RANGE: 0.625" ID - 3" OD (12.7 ID - 63.5 OD mm) 08 2017 BG38 The BG38 Boiler Gun is a combination of power, versatility, and ease of use in a compact and lightweight package. Designed
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationO.D. PIPE CUT OFF AND GOLIATH GUILLOTINE. SUPER C Cuts 2 through 12 (ND50-300) pipe. Cuts solids through (324 mm) diameter.
P R O D U C T S Wachs 1932 For over 125 years E.H. Wachs has manufactured the world s finest line of portable pipe machining tools, valve exercisers and related equipment. Specially designed with the field
More informationSplined one-touch controller enables Quick & Easy adjustment
Splined one-touch controller enables Quick & Easy adjustment Fine bevel adjustment by minimum 0.1mm increment A spline controller prevents loosening of bevel adjustment Ideal for beveling work required
More informationPATENT EP COMPENSATING CHUCKS OVEKA & KA
PATENT EP1 190 815 COMPENSATING CHUCKS OVEKA & KA COMPENSATING CHUCKS For centric cylindrical, orbital pin or form grinding of complex shaft-type components, the workpiece is generally ground between centers.
More informationO.D. Mounted Machine Tools - Pipe Ranges
O.D. Mounted Machine Tools - Pipe Ranges ½in 13mm 12in 305mm 24in 610mm 36in 914mm 48in 1219mm 60in 1524mm 72in 1829mm 90in 2286mm 120in 3048mm SDSF 1.0 SDSF 2.0 LDSF HDSF DYNAPREP LCSF SDSF SDSF 3.0 SDSF
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127
More informationOperation Instruction
Shanghai Zhengte Welding Equipments & Consumables Manufacture CO., LTD. Enterprise of ISO-9001 Quality System Certification Operation Instruction Pipe Cutting and Machine Please use this machine after
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationPRECISION, VERSITALITY, & CONSISTENCY
SMART CUT 6001 GP SECTIONING SAW Operator can change the feed rate and blade speed during operation Can be used for highest precision applications and for general low deformation, low kerf loss sectioning
More informationKentwood M509X 5 Head Moulder
TECH SPEC MS 31513 PAGE 1 Kentwood M509X 5 Head Moulder The Kentwood M509X 5 Head through feed Moulder s heavy cast iron construction, tight tolerance spindle assemblies, rugged feed works, heavy duty
More informationANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia
ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia You can do lapping of 2 valves of different size in this range. Operative Range:
More informationOTTO ARC TABLE OF CONTENTS INTRODUCTION PIPE SYSTEMS CONTACT US! ARC-PS (Pipe System) ARC-3R (Pressing Roller Pipe Welding System)
OTTO ARC INTRODUCTION Otto Arc Systems, Inc., formerly Otto Tool, has been in business for over 27 yrs. We have provided Beveling and Facing Equipment since the day we opened our doors and have been expanding
More informationBest MATERIALS.com Discount Warehouse
Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationPERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT SF8M The SF8 is sized to surface diesel heads, blocks and manifolds. All SF machines use the same tooling and fixturing for quick, rigid
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationTouch Screen CNC Control
Touch Screen CNC Control FEATURES Nearly four decades ago, Rottler pioneered automation and programming by utilizing electronics and computers. Today, the SAD Surfacing machines incorporate the latest
More informationReed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
More informationDigital scales description S_System LIN Precision measuring set for new development and retro-fitting Easy to integrate in your projects Small overall
Digital scales description S_System LIN Precision measuring set for new development and retro-fitting Easy to integrate in your projects Small overall dimensions USB or RS-232 connectivity Software development
More information