Coin vending controller
|
|
- Scarlett Agatha McGee
- 6 years ago
- Views:
Transcription
1 Coin vending controller Bluetooth For water Vending machine For Model No. ECA4058
2 Introduction ECA 4058 is a coin vending controller. It is used in water vending machines. We can use JY926 or ICT UCA2 coin acceptor with this controller and any other coin acceptor can also be attached with the help of customer care support. This is very high tech as well as price efficient model. This is economical model for water vending machine. This is highly precise and long durable product. We can operate it in several operating modes. It mainly works in two modes. That is flow meter mode and timer mode. Flow mode and timer mode. These are described below:- Setting Menu:- This product is Bluetooth enabled device, it have inbuilt Bluetooth module that can be paired with mobile and laptop. To pair with mobile you need an app Bluetooth spp pro tool, Available on Google play store ECA Serial no is back side of product
3 A product of Extreme Control & Automation Pvt. Ltd Enter pin is 1234 for pairing. When pairing complete the next ask for connect Now click on connect Then next ask for Click on Byte Stream Mode button Now when click on Byte stream mode terminal screen will open like:-
4 Send Button is here Now do not wait for waiting to receive.now type and send password to open setting menu Login Password is required to operate any control panel from android mobile. You may know default password from your administrator.this is six characters password from which login can be done. All further commands will work only when login is done properly. Any command given without login will revert as invalid command. If you see invalid command its mean that either you didn t login or not given command properly. Command format is [pw][space][password like ]. e.g. pw xxxxxx
5 There are two types of password first is user/operator password and second is master password. All basic setting can be done by user password, whereas some special setting can be done by master password on demand of administrator only. Flow Meter Mode In this mode dispense is done based on flow sensor counts. In this mode flow sensor is deployed in dispensing outlet pipe line. Flow meter is used for getting batter accuracy to avoid variation occurred due to increase or decrease tank level. When water flows from flow sensor, there is a wheel in the flow sensor that rotates. The controller senses each rotation when water flows. After completing the counts as programmed by user controller stop the dispensing. For setting Controller in flow meter mode. The command format is [mode2][space][f] for flow miter mode [mode2][space][t] For timer mode The factory default is timer mode e.g. mode2 f for flow miter mode mode2 t for timer mode Coin Acceptor Setting We can use these six types of coins in that coin acceptor.
6 Which is called (A for 1 rupee coin) (B for 2 rupee coin) (C for 5 rupee coin) and (D for 10 rupee coin). Dispense Quantity Setting In this we can program dispense quantity for each type of coins individually. If the controller is set in timer mode then the quantity setting is in multiple of 10milliseconds. For example= If we want to run the relay for 1 second so we program 100 counts for 1 sec. And if we want to set relay runtime for 5 seconds then we program 500 counts. The command format is [cnt][space][x][500] Where X is replaced by a for 1Rs. X is replaced by b for 2Rs. X is replaced by c for 5Rs. X is replaced by d for 10Rs. If Controller is operating in flow meter mode
7 Then You give command [cnt][space][x][y] Where:- Y is the no. of counts required to complete dispense for that coin. X is replaced by a for 1Rs. X is replaced by b for 2Rs. X is replaced by c for 5Rs. X is replaced by d for 10Rs. For example= If we want 100cnt for 1 rupee then we give [cnt][space][a][100] for 1 rupee e.g. cnt a100 If you want to know how much quantity for each coin is programmed in setting menu. So you can read it all in single command. The command format is [cnt][space][?] e.g. cnt? Coin Acceptor manual Manual of CH-926 CH-926 is a multi coin selector, can accept up to 6 kinds of different coins at the Same time. This type of coin selector is widely used in Vending machine, Arcade
8 Game, Message chair, and other self management system. CH-926 is mainly based On material, weight and size to identify coins. We use the most up to date algorithm to Design software. Therefore, CH-926 is very stable and accurate even when Environment changes such as temperature, and humidity etc In order to increase the Accuracy, we suggest different version of coins use different channel to set up. Specifications Coin diameter: 15mm~32mm Coin thickness:1.2mm~3.8mm Working voltage: DC +12V ±10% Working current: 65mA ±5% Signal output: pulse Atmospheric pressure: 86Kpa 106Kpa Working humidity: 95% Speed: 0.6s Accuracy rate of identification:99.5% Features A. Capable of accepting all worldwide Coins and Tokens. B. Intelligent CPU software control and high accuracy. C. Self-programming without PC. D. Accept 1~6 different kinds of coins at the same time. E. Free to set up pulses' output. F. Prevent not only electric shock but also electromagnetic interference. G. Automatic self-tests for problems. Manual of CH-926 The Process of Setup for Parameters
9 1. Press the "Add" and "minus" buttons at the same time for about three seconds, then the Letter "A" will appear From the LED display. 2. Press the "setup" button once, and the letter "E" will appear. Next, use the buttons to Choose how many kinds of coins you would like to use; then press the "setup" button Again to finish. 3. The letter "H" will appear after pressing the button. Use the "Add" and "minus" buttons to Choose how many Samples you would like to insert later. Next press the "setup" button Again to finish. 4. The letter "P" will appear after pressing the button. Use the "Add" and "minus" buttons to Choose the amount of output's signals/pulses you want. The quantity limited is 50 times. Next, press the "setup" button to finish. 5. The letter "F" will appear after pressing the button. Use the "Add" and "minus" buttons to Choose accuracy. The value is from 1~ 30 and 1 is the most accurate. Normally, 5~10 will Be fine. Next, press the "setup" Button to finish. 6. So far, you have successfully set up the first coin. Please repeat all above procedures until You have set up all the coins. The letter "A" will appear again after all above procedures Are finished. 7. Press the "setup" button, and the letter "E" will appear. Finally, turn off and turn on the Power. The setup will be stored. You can start sampling after the setup is finished. Please choose at least 20 coins. The sampling process will affect the accuracy of coin selector. Sampling 1. Press the "setup" button, then letter "A" will appear from the LED display. 2. Press the "setup" button again, and then letter "A1" will appear. Next, start to insert Sample Coins. The LED Display will show how many coins you insert. The letter "A1" will appear again after Finished. 3. Press the "setup" button again, then the letter "A2" will appear. Next, start to sample 2nd Coin and repeat no. 1 and No. 2 until all the coins are set up. 4. After finished the sampling, press the "setup" button. The letter "A will appear, then turn Off and turn on the Power. Now you can start to use it. Connections' manual
10 Manual of CH-926 FAQ: A. Coins can't pass through 1. Check if the connection is correct or poor connection. 2. Check if sampling is appropriate. 3. Check if there is something stuck inside. B. Can't identify outputs 1. Check if 2 way switch -NO. NC. - are correct. 2. Check if Single wire is connected correctly. 3. Check if there is pull-up resistor with signal wire (not allowed). 4. Check if there is something stuck on the channel where the coins pass out. C. Coins cannot pass smoothly 1. Check if the parameter is set up appropriately. 2. Check the accuracy switch 3. Check if there is something stuck on the channel where the coins pass out. Name and Function
11 1 LED light - The light of Indication. 2 4pin Socket 3 two way switch signal output NO. Or NC. 4 Three way switch - Output signal - fast: 20ms, medium: 50ms, slow: 100ms 5 2pin Socket - Electromagnetic valve DC 12V 6 Setup button 7 LED display 8 Add button - Plus "+" value 9 Minus button - Minus - value 10 Coin slot 11 Press-button for removal of blocked coin 12 Return slot of Coin 13 Position of electromagnetic strobe Warning: - Remember gray wires should never touch each other while panel on otherwise panel will bloom. And relay driver will be destroyed.
12
Blue Point Engineering
Blue Point Engineering Instruction I www.bpesolutions.com Pointing the Way to Solutions! Animatronic Wizard - 3 Board (BPE No. WAC-0030) Version 3.0 2009 Controller Page 1 The Wizard 3 Board will record
More informationOperator Menus Guide Incredible Technologies, Inc. All Rights Reserved
Operator Menus Guide 2014 Incredible Technologies, Inc. All Rights Reserved Operator Menus Guide OPERATOR MENUS NAVIGATING THE MENU SYSTEM The Operator Menus allow you to adjust the machine for your specific
More informationTABLE OF CONTENTS. PDF 文件使用 "pdffactory Pro" 试用版本创建
TABLE OF CTENTS Version: 4.3-003 Time: 2008-3-5 SAFTTY INSTRUCTIS...1 INTRODUCTI...2 PACKAGING...2 ACCERSSORIES...2 TECHNICAL PARAMETERS...2 LOCATI REQUIREMENTS...2 PLAYING INSTRUCTIS...3 ADJUSTING THE
More informationTechnical description of the fuel tank sensor "Escort TD-500"
Technical description of the fuel tank sensor "Escort TD-500" Kazan, 2016 1 Table of contents 1. General info..3 2. Technical characteristic.. 3 3. Operating mode. 3 3.1. Mode RS-485 3 3.2. Frequency mode
More informationCASH-Interface2. v1.09. Universal CASH Interface
CASH-Interface2 v1.09 Universal CASH Interface Features - Simultaneous operation of a coin and bill validator as well as 3x hopper. - Works on the USB (with USB to Serial converter) or serial port. - RS232
More informationFRUIT BONUS 2 nd Generation 2004 AMCOE INC.
PIN PARTS SIDE SOLDER SIDE PIN 1 VIDEO RED VIDEO GREEN 1 2 VIDEO BLUE VIDEO SYNC 2 3 SPEAKER + SPEAKER - 3 4 EXTRA - 4 5 EXTRA - STOP 2 EXTRA - ALL STOP 5 6 EXTRA - STOP 3 6 7 TICKET OUT BUTTON - panel
More informationCatalog
- 1 - Catalog 1. Description...- 3-2. Features...- 3-3. Applications... - 3-4. Block Diagram...- 3-5. Electrical Characteristics... - 5-6. Operation... - 5 - Power on Reset... - 5 - Working mode... - 6
More informationMunti-Coin Acceptor / Validator RS232 Serial Communication Protocol & Pulses Output
Munti-Coin Acceptor / Validator RS232 Serial Communication Protocol & Pulses Output Technical Manual May 20, 2015 Version: 01 Model: CX-363CA v.1 Used on: SMOVE/Poland *attached to face plate A *attached
More informationTIGER HOOK 2004 AMCOE INC.
TIGER HOOK 2004 AMCOE INC. PIN PARTS SIDE SOLDER SIDE PIN 1 VIDEO RED VIDEO GREEN 1 2 VIDEO BLUE VIDEO SYNC 2 3 SPEAKER + SPEAKER - 3 4 EXTRA - 4 5 EXTRA - STOP 2 EXTRA - ALL STOP 5 6 EXTRA - STOP 3 6
More informationORCA-50 Handheld Data Terminal UHF Demo Manual V1.0
ORCA-50 UHF Demo Manual V1.0 ORCA-50 Handheld Data Terminal UHF Demo Manual V1.0 Eximia Srl. www.eximia.it - www.rfidstore.it mario.difloriano@eximia.it 1 Eximia Srl www.eximia.it - www.rfidstore.it Catelogue
More informationDVBCommunity - cообщество профессионалов ЦТВ CP7039+CP3039 User Manual
CP7039+CP3039 User Manual TX:CP7039 RX:CP3039 Antenna Antenna WIFI indicator Low battery indicator WIFI indicator Low battery indicator OLED display screen Audio in OLED display screen Reset Key Mini Hdmi
More informationCashConcepts CCE 4000
CashConcepts CCE 4000 Coin Counter and Sorting Machine User Manual Introduction Thank you for choosing the CCE 4000. This coin counting and coin sorting machine is designed to simplify the daily cash or
More informationCP7039+CP3039 User Manual
CP7039+CP3039 User Manual TX:CP7039 RX:CP3039 Antenna Antenna WIFI indicator Low battery indicator WIFI indicator Low battery indicator OLED display screen Audio in OLED display screen Reset Key Mini Hdmi
More informationRC-WIFI CONTROLLER USER MANUAL
RC-WIFI CONTROLLER USER MANUAL In the rapidly growing Internet of Things (IoT), applications from personal electronics to industrial machines and sensors are getting wirelessly connected to the Internet.
More informationMityCAM-B2521 EPIX XCAP User s Guide
MityCAM-B2521 EPIX XCAP User s Guide (CT031 Revision 1) Page 1 of 13 60-000014 Contents 1 Installing Laptop Express Card... 3 2 Using the Camera in Single Camera Link mode (Laptop)... 3 3 Single Camera
More informationVersion: 2.0 Date: 5/31/ :07:00 AM
Weavefuture Coin Op Internet Café Kiosk System 2.0 Version: 2.0 Date: 5/31/2007 12:07:00 AM Table of Contents 1 WEAVEFUTURE COIN OP INTERNET CAFÉ KIOSK SYSTEM COMPOSITION... 3 2 WEAVEFUTURE COIN ACCEPTOR
More informationGPRS-T2. GPRS/SMS Reporting Module. SATEL sp. z o.o. ul. Schuberta Gdańsk POLAND tel
GPRS/SMS Reporting Module GPRS-T2 Program version 1.0 gprs-t2_en 11/08 SATEL sp. z o.o. ul. Schuberta 79 80-172 Gdańsk POLAND tel. + 48 58 320 94 00 info@satel.pl www.satel.pl WARNINGS The module should
More informationWALLY ROTARY ENCODER. USER MANUAL v. 1.0
WALLY ROTARY ENCODER USER MANUAL v. 1.0 1.MEASUREMENTS ANGULAR POSITIONING a. General Description The angular positioning measurements are performed with the use of the Wally rotary encoder. This measurement
More informationOPERATOR S MANUAL COASTAL AMUSEMENTS, INC, 1950 SWARTHMORE AVE LAKEWOOD, NJ (732)
a mobile app to coin-op game OPERATOR S MANUAL COASTAL AMUSEMENTS, INC, 1950 SWARTHMORE AVE LAKEWOOD, NJ 08701 (732) 905-6662 http://www.coastalamusements.com INTRODUCTION Rail Rush is an amusement redemption
More informationEndurance R/C Wi-Fi Servo Controller 2 Instructions
Endurance R/C Wi-Fi Servo Controller 2 Instructions The Endurance R/C Wi-Fi Servo Controller 2 allows you to control up to eight hobby servos, R/C relays, light controllers and more, across the internet
More informationisma-b-w0202 Modbus User Manual GC5 Sp. z o.o. Poland, Warsaw
isma-b-w0202 isma-b-w0202 Modbus User Manual GC5 Sp. z o.o. Poland, Warsaw www.gc5.com 1. Introduction... 4 2. Safety rules... 4 3. Technical specifications... 5 4. Dimension... 6 5. LED Indication...
More informationExercise 2-2. Four-Wire Transmitter (Optional) EXERCISE OBJECTIVE DISCUSSION OUTLINE. Ultrasonic level transmitter DISCUSSION
Exercise 2-2 Four-Wire Transmitter (Optional) EXERCISE OBJECTIVE Become familiar with HART point-to-point connection of a four-wire transmitter. DISCUSSION OUTLINE The Discussion of this exercise covers
More informationQS PRO & QS PRO 2 Set-up App Instructions For Bluetooth BLE (Android 4.4+)
QS PRO & QS PRO 2 Set-up App Instructions For Bluetooth BLE (Android 4.4+) All QS PRO s shipped since December 1, 2015 have the newest version Bluetooth BLE capability for entering and using the setup
More information8000 SERIES PRECISION MULTIMETER VERIFICATION AND ADJUSTMENT GUIDE
8000 SERIES PRECISION MULTIMETER VERIFICATION AND ADJUSTMENT GUIDE TRANSMILLE LTD. Version 1.1 : Apr 2015 TABLE OF CONTENTS PREPARING FOR CALIBRATION... 4 INTRODUCTION... 4 CALIBRATION INTERVAL SELECTION...
More informationCatalogue
- 1 - Catalogue 1. Description... - 3-2. Features... - 3-3. Applications...- 3-4. Block Diagram... - 3-5. Electrical Characteristics...- 4-6. Operation...- 5 - Power on Reset... - 5 - Working mode... -
More informationTRWinProg 101by Chris Bowman October 10
TRWinProg 101by Chris Bowman October 10 TRWinProg is a Windows based program for serial programming of encoders. The program allows viewing of setup data stored within the encoder and allowing the user
More informationShelti, Inc. 333 Morton Street Bay City, MI Phone Fax. Bayside Dollar Bill Acceptor Pool Table Manual & Instructions
Shelti, Inc. 333 Morton Street Bay City, MI 48706 989-893-1739 Phone 989-893-1809 Fax Bayside Dollar Bill Acceptor Pool Table Manual & Instructions Contents Section-1 Introduction Bayside DBA Pool Table
More informationSV-MESH Mesh network series Catalogue
Catalogue 1. Description... 3 2. Features... 3 3. Applications... 3 4. Block Diagram... 4 5. Electrical Characteristics... 5 6. Operation... 5 Power on Reset... 5 Working mode... 6 Router mode... 8 Setting
More informationJet Central Sequencer Plus
Jet Central Sequencer Plus Features The Jet Central Sequencer Plus is a multipurpose electronic device, the capabilities of the unit include: Three part sequencer, operating landing gear and two independent
More informationEinScan-SE. Desktop 3D Scanner. User Manual
EinScan-SE Desktop 3D Scanner User Manual Catalog 1. 2. 3. 4. 5. 6. 7. 8. 1.1. 1.2. 1.3. 1.1. 1.2. 1.1. 1.2. 1.3. 1.1. 1.2. Device List and Specification... 2 Device List... 3 Specification Parameter...
More informationST600 TRANSMITTER OPERATING INSTRUCTIONS
ST600 TRANSMITTER OPERATING INSTRUCTIONS 1892 1273 These operating instructions are intended to provide the user with sufficient information to install and operate the unit correctly. The Wood and Douglas
More informationGOLDEN CITY (5 REELS 25 LINES VIDEO XVGA SLOT GAME)
GOLDEN CITY (5 REELS 25 LINES VIDEO XVGA SLOT GAME) Golden City designs with the object of operating professional and amused game of casino, rather than making classic slot game. It s really extraordinary
More informationSV613 USB Interface Wireless Module SV613
USB Interface Wireless Module SV613 1. Description SV613 is highly-integrated RF module, which adopts high performance Si4432 from Silicon Labs. It comes with USB Interface. SV613 has high sensitivity
More information~ Pizzeria ~ The following developer is responsible for the declaration: Astro Corp.
~ Pizzeria ~ The following developer is responsible for the declaration: Astro Corp. 10F, No. 111-1 HSING DE RD, SANCHUNG CITY, TAIPEI COUNTY, TAIWAN Tel:+886-2-8511-0555 Fax:+886-2-8511-0556 E-mail:sales@astrocorp.com.tw
More informationTECHNICAL INSTRUCTIONS FOR DataTrace CALIBRATION PROCEDURES
TECHNICAL INSTRUCTIONS FOR DataTrace CALIBRATION PROCEDURES HUMIDITY CALIBRATION The following procedures provide instructions for performing field calibrations on DataTrace equipment. There are two types
More informationDHM-15 HEIGHT AND WEIGHT MACHINE
The Standard Basic Unit of DHM-15 Height and Weight Machine: Mainframe- -Saddle- Picture 1 Picture 2 Height measuring component -- Picture 3 picture 4 1 Installment instruction: First: Open the packaging
More informationLVTX-10 Series Ultrasonic Sensor Installation and Operation Guide
LVTX-10 Series Ultrasonic Sensor Installation and Operation Guide M-5578/0516 M-5578/0516 Section TABLE OF CONTENTS 1 Introduction... 1 2 Quick Guide on Getting Started... 2 Mounting the LVTX-10 Series
More informationINSTRUCTION MANUAL FOR ULTRASONIC/MICROWAVE SENSORS
INSTRUCTION MANUAL FOR ULTRASONIC/MICROWAVE SENSORS 1)Install PROBE_GatewayPC Software on PC.Remove previous installation. In Windows Control Panel go to the Programs and Features, select Probe_GatewayPC_Net
More informationQS PRO Set-up App Instructions Bluetooth setup
QS PRO Set-up App Instructions Bluetooth setup All QS PRO s shipped since February 28, 2015 have Classic Bluetooth capability for entering and using the setup features of the shifter. Older versions of
More informationPWM P108. Programming Instructions v 3.2 PWM Controller Software
PWM P108 Programming Instructions v 3.2 PWM Controller Software PWM P108 Programming Instructions v 3.2 for PWM Controller Software Download / Install & Run Driver (Must be installed for software to work)
More informationACD3180 Card Dispenser/Encoder System. User Manual and Setup Guide. Choose ACDI for all your document vending needs
ACD3180 Card Dispenser/Encoder System User Manual and Setup Guide Choose ACDI for all your document vending needs INTRODUCTION... 1 OVERVIEW... 1 SETUP... 2 UNPACKING THE DISPENSER SYSTEM... 2 PHYSICAL
More informationUse this procedure when making a service run to sites where a Reftek RT-130 and a broadband sensor have been installed.
RT-130/Broadband Site Service Guide 2004.027 Use this procedure when making a service run to sites where a Reftek RT-130 and a broadband sensor have been installed. 1. Inspect the site. Arrive at the site.
More informationUSB Multifunction Arbitrary Waveform Generator AWG2300. User Guide
USB Multifunction Arbitrary Waveform Generator AWG2300 User Guide Contents Safety information... 3 About this guide... 4 AWG2300 specifications... 5 Chapter 1. Product introduction 1 1. Package contents......
More informationA step-by-step process for attaching a photo of the park through Android Mobile Application
A step-by-step process for attaching a photo of the park through Android Mobile Application Feedback is registered by the customer with the details of the customer and park through web based enabled application
More informationCatalog
- 1 - Catalog 1. Overview... - 3-2. Feature...- 3-3. Application... - 3-4. Block Diagram... - 3-5. Electrical Characteristics...- 4-6. Operation...- 4-1) Power on Reset... - 4-2) Sleep mode...- 4-3) Working
More informationCalibration Instruction Manual Emerson 475 Field Communicator. Manual Revision FC.2
Calibration Instruction Manual Emerson 475 Field Communicator Manual Revision FC.2 ABM 2 Wire Radar with HART ABM Sensor Technologies Inc 2013, all rights reserved. Emerson is a registered trademark of
More informationLS3300 AC Power Calibrator Simple Adjustment Procedure for Voltage, Current, and Frequency
User s Manual AC Power Calibrator Simple Adjustment Procedure for Voltage, Current, and Frequency The instrument should be adjusted by a qualified engineer at a qualified facility with sufficient precision.
More informationGE Infrastructure Sensing. Druck DPI 841/842. Frequency calibrator and Frequency loop calibrator User manual - K395
GE Infrastructure Sensing Druck DPI 841/842 Frequency calibrator and Frequency loop calibrator User manual - K395 A1 B1 10 1 A 2 9 A 3 8 2 3 7 6 11 4 5 B1 12 A2 DPI 842 13 15 14 A3 19 18 17 16 27 20 21
More informationP2P 2 YEAR PL-VDIO-05. Smartphone Connect IP VIDEO DOOR PHONE QUICK START GUIDE 7 VIDEO DOOR PHONE SYSTEM WITH SMARTPHONE CONNECT
PL-VDIO-05 IP VIDEO DOOR PHONE QUICK START GUIDE Smartphone Connect 2 YEAR RR T SERVICES WA P2P Y Receive calls, remote monitor and remote unlock with your smart phone AN 7 VIDEO DOOR PHONE SYSTEM WITH
More information~ Happy Farm ~ The following developer is responsible for the declaration: Astro Corp.
~ Happy Farm ~ The following developer is responsible for the declaration: Astro Corp. 10F, No. 111-1 HSING DE RD, SANCHUNG CITY, TAIPEI COUNTY, TAIWAN Tel:+886-2-8511-0555 Fax:+886-2-8511-0556 E-mail:sales@astrocorp.com.tw
More informationLesson 3: Arduino. Goals
Introduction: This project introduces you to the wonderful world of Arduino and how to program physical devices. In this lesson you will learn how to write code and make an LED flash. Goals 1 - Get to
More information.VEGAS NIGHT. The following developer is responsible for the declaration: (Manual Version: VEG_INT _7B) VEG_INT _7B 1
.VEGAS NIGHT. The following developer is responsible for the declaration: Astro Corp. 10F, No.111-1, HSING DE RD, SANCHUNG CITY, TAIPEI COUNTY, TAIWAN Telephone:+886-2-8511-0555 Facsimile:+886-2-8511-0556
More informationCatalog
- 1 - Catalog 1. Overview...- 3-2. Feature... - 3-3. Application...- 3-4. Block Diagram...- 3-5. Electrical Characteristics... - 4-6. Operation... - 4-1) Power on Reset... - 4-2) Sleep mode... - 4-3) Working
More information3 AXIS RF ELECTROMAGNETIC FIELD METER
50 MHz to 3 GHz Radio Frequency Radiation Meters Electromagnetic Field strength measurement 3 AXIS RF ELECTROMAGNETIC FIELD METER Model : EMF-819 Your purchase of this RF EMF METER marks a step forward
More informationExperiment #3: Micro-controlled Movement
Experiment #3: Micro-controlled Movement So we re already on Experiment #3 and all we ve done is blinked a few LED s on and off. Hang in there, something is about to move! As you know, an LED is an output
More informationTroubleshooting Guide for Aquatrac Smart AS and Flex
Troubleshooting Guide for Aquatrac Smart AS and Flex Part 1 Sensors and Analog Signals Alpha Release July 28 th, 2000 Alpha Release Page 1 of 21 Preface Welcome to the Aquatrac troubleshooting guide. This
More informationUWYO VR SETUP INSTRUCTIONS
UWYO VR SETUP INSTRUCTIONS Step 1: Power on the computer by pressing the power button on the top right corner of the machine. Step 2: Connect the headset to the top of the link box (located on the front
More informationFour channel wireless switch controller SK108
Four channel wireless switch controller SK108 Description SK108 is a industrial four channel wireless switch controller, it provides maximum four channel signal input and maximum four channel control output.
More informationPIRATES ISLAND (SUBSINO CASINO GAME XVGA SERIES)
PIRATES ISLAND (SUBSINO CASINO GAME XVGA SERIES) This game takes a theme you already love Pirates Island - to the next level with new XVGA 5-reels and 9-lines of excitement. State-of-the-art graphics promote
More informationFunctions Added to Smart Camera FQ2 Sensor Software
To our customers July 2013 OMRON Corporation Industrial Automation Bisiness Company Functions Added to Smart Camera FQ2 Sensor Software Thank you for using OMROM products. We have released a new version,
More informationMAKEBLOCK MUSIC ROBOT KIT V2.0
MAKEBLOCK MUSIC ROBOT KIT V2.0 Catalog Music Robot Kit V2.0 Introduction... 1 1 What is Music Robot Kit V2.0?... 1 1.1 Mechanical part... 1 1.2 Electronic part... 1 1.3 Software part... 1 2 Music Robot
More informationThe Discussion of this exercise covers the following points: Differential-pressure transmitter. Differential-pressure transmitter
Exercise 2-1 Two-Wire Transmitter EXERCISE OBJECTIVE Become familiar with HART point-to-point connection of a two-wire transmitter. DISCUSSION OUTLINE The Discussion of this exercise covers the following
More information2016+ QS PRO Set-up App Instructions For Bluetooth BLE (Android 4.4+)
2016+ QS PRO Set-up App Instructions For Bluetooth BLE (Android 4.4+) All QS PRO s shipped since December 1, 2015 have the newest version Bluetooth BLE capability for entering and using the setup features
More informationAHC-XP. Dewpoint-guided Power Controller for Glass and Handrail Heaters. Front view. Characteristics
Dewpoint-guided Power Controller for Glass and Handrail Heaters Front view Characteristics Dew point-guided power controller for cost-optimized operation of glass and handrail heaters Digital display of
More informationInstruction Manual ABM HART Gateway Software. Instruction Manual Revision A.1
Instruction Manual ABM HART Gateway Software Instruction Manual Revision A.1 Table of Contents Section 1: Getting Started... 3 1.1 Setup Procedure... 3 1.2 Quick Setup Guide for Ultrasonic Sensors... 11
More informationInstruction Manual HAS3xE-IM-SW39 10/2005
Instruction Manual HAS3xE-IM-SW39 10/2005 Software Version 3.9.x NGA 2000 Software Manual for MLT or CAT 200 Analyzer and MLT or CAT 200 Analyzer Module (combined with NGA 2000 Platform, MLT, CAT 200 or
More informationCOASTAL AMUSEMENTS, INC, 1950 SWARTHMORE AVE LAKEWOOD, NJ (732)
OPERATOR S MANUAL COASTAL AMUSEMENTS, INC, 1950 SWARTHMORE AVE LAKEWOOD, NJ 08701 (732) 905-6662 http://www.coastalamusements.com INTRODUCTION Subway Surfers is an amusement redemption game in which the
More informationPRINTING ON YOUR IPAD
PRINTING ON YOUR IPAD TABLE OF CONTENTS I don t have Papercut on my ipad... 1 I can t see any printers when trying to print... 2 The Papercut app wants me to sign in... 3 Can I print double sided?... 4
More informationCustom Mobile App Support
Custom Mobile App Support FBBC by Samantha Taylor App Scheduling app for Fit Body Boot Camp and Samantha Taylor Fitness. You can prebook your workouts, check in for your workout or cancel it, all through
More informationBlue Point Engineering
Blue Point Engineering Instruction I www.bpesolutions.com Pointing the Way to Solutions! Puppet - II+ Controller (BPE No. PCA-0001) Servo Position Adjustment EEPROM Digital Button Power 5 Vdc Playback
More informationCCG Referral App - Northern Ireland
CCG Referral App - Northern Ireland For practices in Northern Ireland who use the Referral Screen supplied by the CCG, the way you access the screen has been updated. A Vision App has been created to enable
More informationSerial No.: MTYxOTAwMDAxMzAw
MODEL: SODIS-215 SERIES NAME: HOOP SHOT CYBER ARCADE Serial No.: MTYxOTAwMDAxMzAw NOTICE! - Actual product may vary in color and design - Above Serial No. is for registering Hoop Shot Online Game on your
More informationPUMAVI Embossing machine Service Manual Note taking Writing Printing in Braille. If it s Braille...ask BRAILLETEC
PUMAVI Embossing machine Service Manual Service manual for PumaVI Using the PumaVI To do 1.1 1.2 1.3 1.4 1.5 1.6 1.7 page Switches for format, graphics and mode Start the Puma Function of red lamps H1H3
More informationAmbir ImageScan Pro 930u. User Guide. High Speed Document Scanner with UltraSonic Misfeed Detection. Ver 1.2. p/n UG930u-1.
Ambir ImageScan Pro 930u High Speed Document Scanner with UltraSonic Misfeed Detection www.ambir.com Ver 1.2 Ambir ImageScanPro 930u Table of Contents Box Contents Installation and Setup Loading Documents
More informationTable of Contents 1 ESD PRECAUTIONS WEAVEFUTURE INTERNET CAFÉ KIOSK BOARD...3
Weavefuture Coin Acceptor and Bill Acceptor Controller Board Version: 1.0 Date: 9/12/2006 12:52:00 AM Table of Contents 1 ESD PRECAUTIONS...3 2 WEAVEFUTURE INTERNET CAFÉ KIOSK BOARD...3 3 WEAVEFUTURE COIN
More informationMultifunction Digital
MS2009A Multifunction Digital Clamp Meter User Manual 200/600 OFF 2/20 NCV SEL MAX V RAN HOLD OFF MS2009A AC CLAMP METER AUTO MAX C F kmω μmva CONTENTS Safety requirements...1 Safety signs...1 Notes...1
More informationBCV-1203 Barcode Verification System Users Guide Version 1.2
BCV-1203 Barcode Verification System Users Guide Version 1.2 6 Clock Tower Place Suite 100 Maynard, MA 01754 USA Tel: (866) 837-1931 Tel: (978) 461-1140 FAX: (978) 461-1146 http://www.diamondt.com/ Liability
More informationSTX Stair lighting controller.
Stair lighting controller STX-1792 STX-1792 controller is used to control stairs lighting dynamically. The backlight is switched on with the subsequent steps, depending on the motion directions: ascending
More informationUser Manual Solenoid Controller BI-SC1001
User Manual Solenoid Controller BI-SC1001 NOTICE Brandstrom Instruments, 2017 85 Ethan Allen Highway Ridgefield, CT 06877 (203) 544-9341 www.brandstrominstruments.com No part of this document may be photocopied,
More informationNeo Ultrasound Module Manual
Neo Ultrasound Module Manual Installation Instructions For complete User Operating Instructions, including Cautions, Warnings, Dangers, Indications, and Contraindications, refer to the User s Manuals.
More informationmulti-function + auto-range, CATIII 1000V ACV/DCV/OHMS/4 to 4000 M ohm, 100V, 250V, 500V, 1000V INSULATION TESTER
multi-function + auto-range, CATIII 1000V ACV/DCV/OHMS/4 to 4000 M ohm, 100V, 250V, 500V, 1000V INSULATION TESTER Model : DI-6400 Your purchase of this INSULATION TESTER marks a step forward for you into
More informationMETERSUK. SmartLink D Y N A M i T E. EM415 MOD Series. User Manual KEY FEATURES INDEX 3. TECHNICAL DESCRIPTION. Single Phase Metering
METERSUK LTD s a l e s @ m e t e r s. c o. u k 0 1 5 2 4 5 5 5 9 2 9 Series Smart Energy Meter KEY FEATURES Single Phase Metering Single phase metering 4 din modules, Standard DIN rail Format (DIN43880)
More informationBiometrics - A Tool in Fraud Prevention
Biometrics - A Tool in Fraud Prevention Agenda Authentication Biometrics : Need, Available Technologies, Working, Comparison Fingerprint Technology About Enrollment, Matching and Verification Key Concepts
More information1. Product Introduction FeasyBeacons are designed by Shenzhen Feasycom Technology Co., Ltd which has the typical models as below showing: Model FSC-BP
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, FeasyBeacon Getting Started Guide Version 2.5 Feasycom Online Technical Support: Skype: Feasycom Technical Support Direct Tel: 086 755 23062695 Email:
More informationTechnical Description and User Manual E-band CW power meter DPM-12 s/n N-1204/21-T
ELVA-1 Microwave Ltd. S.A. Mm-wave Division e-mail: sales@elva-1.com Internet: http://www.elva-1.com/ Technical Description and User Manual E-band CW power meter DPM-12 s/n N-1204/21-T 1 Specifications
More informationInstallation Manual. Ultra RF Analogue Transmitter QC0168. Manual Ref: QC0168. Version: March
Installation Manual Ultra RF Analogue Transmitter QC0168 Manual Ref: QC0168 Version: March 17 1.0 System Concept RF Transmitters connect to sensors or meters and send data to the infrastructure internet
More informationTEK-TROL HART GATEWAY SOFTWARE. Operating Instruction Manual.
TEK-TROL HART GATEWAY SOFTWARE Operating Instruction Manual www.tek-trol.com Table of Contents 1 Getting Started... 2 1.1 Setup Procedure... 2 1.2 Quick Setup Guide for Radar Sensors... 10 2 Level device
More informationAn Escape Room set in the world of Assassin s Creed Origins. Content
An Escape Room set in the world of Assassin s Creed Origins Content Version Number 2496 How to install your Escape the Lost Pyramid Experience Goto Page 3 How to install the Sphinx Operator and Loader
More informationID station Photomatic
Version 7.3 Last change : August 2016 Page 1 Introduction This is the of, the most reliable and fastest biometric passport photo system. This user guide helps you in everyday use. Please check www.idstation.eu
More informationIntegrated Sensor System TM (ISS) Installation, Programming & Operation Guide
Integrated Sensor System TM (ISS) Installation, Programming & Operation Guide Symbols NOTE: Symbol alerts the user to important operating, functionality, installation or maintenance instructions. WARNING:
More informationTo Purchase This Game, Visit BMI Gaming Or Contact International Sales at (USA) The Simpsons Soccer
The Simpsons Soccer STANDARD OPERATING MANUAL Rev. 9-4-12 (Software Version: 07-30-12) Coastal Amusements, Inc. 1950 Swarthmore Ave. Lakewood, NJ 08701 +1 (732) 905-6662 sales@coastalamusements.com http://www.coastalamusements.com
More informationBoink Kiosk System Administration Manual
Boink Kiosk System Administration Manual Last updated on May 21st, 2002 Table of Contents INTRODUCTION Boink Kiosk System...2 Safety Precautions...3 KIOSK SYSTEM NORMAL OPERATION SF6 Kiosk General Description
More informationKoPa Scanner. User's Manual A99. Ver 1.0. SHENZHEN OSTEC OPTO-ELECTRONIC TECHNOLOGY CO.,LTD.
KoPa Scanner A99 User's Manual Ver 1.0 SHENZHEN OSTEC OPTO-ELECTRONIC TECHNOLOGY CO.,LTD. http://www.ostec.com.cn Content Chapter 1 Start... 1 1.1 Safety Warnings and Precautions... 1 1.2 Installation
More informationDisclaimers. Important Notice
Disclaimers Disclaimers Important Notice Copyright SolarEdge Inc. All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
More informationInstallation guide. Activate. Install your Broadband. Install your Phone. Install your TV. 1 min. 30 mins
Installation guide 1 Activate Install your Broadband Install your TV 4 Install your Phone 1 min 0 mins 0 mins 5 mins INT This guide contains step-by-step instructions on how to: 1 Activate Before we do
More informationalpha home / introduction
alpha home alpha home / introduction What does alpha home provide? Intelligent individual room control system Communication between heat pump and heating distribution system Radio system, fits for new
More informationDESIGNED BY THE BLACK TANK USER MANUAL
DESIGNED BY THE BLACK TANK USER MANUAL Table of Contents Your CubeConnect Transceiver Product Description... 5 What s In the Box... 6 CubeConnect Transceiver Interface... 7 CubeConnect Transceiver Modes
More informationAI BOX 1. ASSEMBLY. A1 : Desk frame B1 : 2 holes for installing 2 M5x16 screws
There are three main installation processes to get your Smart Standing Desk with AI up and running. 1. Assemble AI Box with your Desk. 2. Install Autonomous Desk application to your phone. 3. Set up AI
More informationEE 314 Spring 2003 Microprocessor Systems
EE 314 Spring 2003 Microprocessor Systems Laboratory Project #9 Closed Loop Control Overview and Introduction This project will bring together several pieces of software and draw on knowledge gained in
More informationbroadcast without limits. user manuel
broadcast without limits. user manuel TRANSMITTER FS-7039 RECEIVER FS-3039 Freestream App Installation Easily download the Freestream app within the App Store or Google Play. System Requirements: ipad
More information