DRAFT EAST AFRICAN STANDARD

Size: px
Start display at page:

Download "DRAFT EAST AFRICAN STANDARD"

Transcription

1 ICS DRAFT EAST AFRICAN STANDARD Specification for carbon paper EAST AFRICAN COMMUNITY EAS 2014 First Edition 2014

2

3 CD/K/19:2014 Copyright notice This EAC document is copyright-protected by EAC. While the reproduction of this document by participants in the EAC standards development process is permitted without prior permission from EAC, neither this document nor any extract from it may be reproduced, stored or transmitted in any form for any other purpose without prior written permission from EAC. Requests for permission to reproduce this document for the purpose of selling it should be addressed as shown below or to EAC s member body in the country of the requester: East African Community 2013 All rights reserved East African Community P.O.Box 1096 Arusha Tanzania Tel: /8 Fax: / eac@eachq.org Web: Reproduction for sales purposes may be subject to royalty payments or a licensing agreement. Violators may be persecuted ii EAC 2014 All rights reserved

4 Foreword Development of the East African Standards has been necessitated by the need for harmonizing requirements governing quality of products and services in the East African Community. It is envisaged that through harmonized standardization, trade barriers that are encountered when goods and services are exchanged within the Community will be removed. In order to achieve this objective, the Community established an East African Standards Committee mandated to develop and issue East African Standards. The Committee is composed of representatives of the National Standards Bodies in Partner States, together with the representatives from the private sectors and consumer organizations. Draft East African Standards are circulated to stakeholders through the National Standards Bodies in the Partner States. The comments received are discussed and incorporated before finalization of standards, in accordance with the procedures of the Community. East African Standards are subject to review, to keep pace with technological advances. Users of the East African Standards are therefore expected to ensure that they always have the latest versions of the standards they are implementing. This Draft East African Standard, DEAS. 857:2015., was prepared by Technical Committee EASC//TC/065 Paper and paper products.the Committee is composed is of representatives from National Standards Bodies, regulators and academia, together with the representatives from the private sector and consumer organizations in Partner States. EAC 2014 All rights reserved iii

5

6 DRAFT EAST AFRICAN STANDARD DEAS 857:2015 Carbon paper- Specification 1 Scope This Draft East African Standard specifies requirements, sampling and test methods for carbon paper. It covers carbon papers for typewriting and carbon papers for handwriting with their respective grades. 2 Normative references ISO 536:2012 Paper -- Determination of grammage ISO 15754:2009 Paper and board test for the directional tensile strength ISO 187: 1990-Paper board, pulps-standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and condition of samples. 3 Terms and definitions For the purpose of this standard, the following shall apply. 3.1 Carbon paper paper coated (generally on one side) with a pressure transferable pigmented or dyed layer, used for making copies at the same time as an original manuscript or typescript is made. 3.2 Durability the minimum number of impressions at the same spot. 3.3 Manifolding the minimum number of carbon copies produced in one typing or writing. 3.4 Curling resistance the tendency of sheet carbon to be flat on exposure to varying conditions of temperature and humidity. 3.5 Staining the discoloration of image receptor sheet during contact with a carbon sheet. 4 Types There shall be two types of carbon paper a Typewriter carbon Papers Grade 1 Light weight. EAC 2014 All rights reserved 1

7 Grade 2 Medium weight. b Handwriting carbon Papers Grade 1 Single side pen/pencil carbon paper. Grade 2 Double side pen/pencil carbon paper (for use where impression on the reverse side of the original is required). 5 Requirements 5.1 General Requirements The carbon paper shall be free from blemishes like wrinkles, waves, tears and cuts and, as far as possible free from pin holes, crease, crimpled corners or sides. It shall be manufactured by coating necessary to give the required copying qualities. The coating shall be smooth, uniform and free from smudginess The side which is not coated shall be marked by printing or by some other means, in order to facilitate distinguishing it from the coated side The carbon paper shall not contain mechanical pulp The edges of the sheets shall be straight, and at right angles to each other The base paper used for the manufacture of typewriter carbon papers shall conform to Grades 1 and 2 as specified in DEAS 857: The base paper used for the manufacture of handwriting carbon papers shall conform to Grades 2 and 3 of the same document stated under the same clause The sizes of the carbon papers shall be A4 and A5 with pull tab length of 10 per cent with appropriate opposite corner cuts. Any other sizes, if required, shall be defined within A and B series of paper sizes in accordance with ISO The carbon shall be well defined and clean. Light shall not have any appreciable effect on the written carbon work. There shall be a gradual, not abrupt, loss of distinctness of the carbon copies when repeated at the same place It shall have no tendency to offset or stain on normal handling when left in contact with copying sheets or separate as flakes when in use Tolerances a) For dimensions up to and including 150 mm ± 1.5 mm. b) For dimensions greater than 150 mm and up to and including 600 mm ± 2.0 mm. 5.2 Physical requirements The carbon papers shall also comply with the requirements given in Table 1 when tested in accordance with the methods prescribed therein. 2 EAC 2014 All rights reserved

8 SL NO. Table 1 Requirements for typewriting and handwriting carbon papers Characteristic Requirements Method of test in Typewriter Carbon Handwriting carbon the Annex paper paper (i) Grammage of base paper g/m 2 ± 5 per cent (ii) Coating, g/m 2 ± 5 per cent (iii) Durability,.(minimum number of impressions at the same spot) (iv) Resistance to curling, per cent (v) Manifolding, copies, min GR 1 GR 2 GR 1 GR ISO 536B B C A D 4 Packaging 4.1 Carbon papers shall be packaged suitable packages in multiples of 25 without exceeding 100 sheets a packet which may be either a folder or cardboard box. 4.2 Reams Carbon papers may also be packed in reams (containing 500 sheets) wrapped in paper strong enough to prevent damage to the carbon papers. 5 Labelling 5.1 Each packet or ream shall be marked with the following information: a) Name and physical address of the manufacturer, or his registered trade mark; b) Type, grade and size of the carbon paper; c) Colour of the coating; d) Number of sheets in the packet; e) Shelf life f) Instructions for use, storage and disposal. 5.2 Cartons Where the packets above have been packed into a carton, the outer side of the carton shall also bear the information contained in clause Sampling For ascertaining the conformity of these types of carbon papers to the requirements of this standard: EAC 2014 All rights reserved 3

9 a) Representative samplesfrom original unopened packets shall be taken from the market or elsewhere, ensuring the procedures of random selection; b) Samples shall be protected from abnormal exposure to heat and light, and shall not be allowed to come in contact with any liquid; c) Samples shall be touched as little as possible, and contact with sweated hands shall be avoided; d) Samples shall not be folded before testing. 7 Test methods Where conditioning is required before testing, condition the specimens according to ISO EAC 2014 All rights reserved

10 ANNEX A (normative) DETERMINATION FOR RESISTANCE TO CURLING A.1 Procedure Place two sheets of carbon papers on a wire screen, carbon-coated side down, in a conditioning room in which relative humidity of 65 ± 2 per cent and temperature of 23 ± 2 0 C are maintained. After the sheets have been conditioned for one hour, remove the sheets from the screen and place on a flat glass surface, carboncoated side-up. After ten minutes, measure the distance between the corners of the short sides and long sides of the sheet, while it is resting freely on the flat surface. A.2 Results Express these lengths as percentages of the original lengths of the short and long sides of the sheet being tested. The degree of resistance to curling shall be the average of the values measured for both the short and long sides of the sheet. EAC 2014 All rights reserved 5

11 ANNEX B (normative) DETERMINATION OF SUBSTANCE OF BASE PAPER AND AMOUNT OF COATING B.1 Test piece Condition at least 5 sheets of the carbon papers and cut out a test piece from each measuring 10.0 cm x 10.0 cm. Weigh it accurately. B.2 Decorating Take a suitable quantity of carbon tetrachloride or a mixture of equal volumes of carbon tetrachloride and acetone in a beaker. Bring the contents to boil on a water bath and immerse the test pieces into the boiling solvent until the tissues are clean. During this operation hold the test pieces with forceps and agitate through the solvent. Repeat the operation with a fresh quantity of solvent, if necessary. After the coating has been removed dry the decoated papers, condition them and weigh accurately. B.3 Calculation For each of the five pieces, do the calculation as follows: S = C = m 1 A Where, m m1 A C = Amount of coating in g/m 2, S = Substance of base paper in g/m 2, m 1 = mass in g of the test piece after decoating, A = Area in m 2 of the test piece, m = Mass in g of the test piece before decoating. The substance of the uncoated paper shall be taken as the arithmetic mean of the five specimens. 6 EAC 2014 All rights reserved

12 ANNEX C (normative) DETERMINATION FOR DURABILITY C.1 Typewriting carbon papers C.1.1 Apparatus C Typewriter Use any suitable electric typewriter with freshly cleaned pica or ball type. The roll of the typewriter used for the test shall be soft. When typing the ribbon shall be suitably tensioned. C Typing paper Use wood-free typewriter paper of substance about 40 g/m 2. C.1.2 Procedure Take a piece of about 4 cm to 5 cm of the carbon paper to be tested and fasten it to the first sheet so that the coated side of the sample comes in contact with the copy sheet in the usual way. After the two sheets of paper have been placed in the testing machine, the first sheet carrying the carbon paper shall be securely fastened to the back of the carriage in any suitable way so that the former will not move while the platen is turned for spacing lines. The platen shall be turned slightly to pull the first sheet taut. Then a line of suitable letter shall be written exactly over the same spot of the carbon paper. The carbon paper shall make not fewer than the required number of intensity. In examining the sheet, the operator shall not be misled by extra black edges of some letters that are indicative of a shifting of the first sheet with attached sample or of a light play of the type bar. C.2 Handwriting carbon papers C.2.1 Apparatus Tests in case of pencil carbon papers shall be made by actual writing with a fountain pen on a g/m 2 white printing paper. C.2.2 Procedure Take a piece of about 4 cm to 5 cm from carbon paper to be tested and fasten it to a sheet of citrite printing paper so that the coated side of the sample comes in contact with the copy sheet in the usual way. Place it on a glass plate with its long side parallel to one side of the plate. Draw out a line impression. Move the copy sheet slightly and draw a line over the same line. The carbon paper shall make not less than the required number of carbon copies from the same place that are clear, legible and of good intensity. EAC 2014 All rights reserved 7

13 ANNEX D (normative) DETERMINATION FOR MANIFOLDING D.1 Typewriter Use the typing paper as specified in clause (C.1.1.2) and a typewriter of the type described in Clause (C.1.1.1)Prepare ten specimens of carbon paper, a sheet of writing paper and ten sheets of copy paper and place specimen of carbon paper between each of the sheets of copy paper.straighten the sheets and place them in the typewriter. The entire keyboard shall be typed twice and the copies examined in dispersed light. Record the number of legible copies. D.2 Handwriting carbon papers Assemble ten sheets of white printing papers and place ten specimens of carbon papers to be tested between them, one specimen of carbon paper on each sheet of copy paper. Place them on a glass plate as in Clause C2.2. Write down about 15 lines and examine the copies and record the number of legible copies. 8 EAC 2014 All rights reserved

14 EAC 2014 All rights reserved

Paper serviettes/napkins Specification

Paper serviettes/napkins Specification ICS DRAFT EAST AFRICAN STANDARD Paper serviettes/napkins Specification EAST AFRICAN COMMUNITY EAS 2014 First Edition 2014 Copyright notice This EAC document is copyright-protected by EAC. While the reproduction

More information

DRAFT EAST AFRICAN STANDARD

DRAFT EAST AFRICAN STANDARD DEAS 224: 2016 ICS ICS 59.080 DRAFT EAST AFRICAN STANDARD Cotton Khanga Specification EAST AFRICAN COMMUNITY EAC 2016 Second Edition 2016 EAS 224: 2016 Copyright notice This EAC document is copyright-protected

More information

EAST AFRICAN STANDARD

EAST AFRICAN STANDARD ICS nn.nnn.nn EAST AFRICAN STANDARD Toilet paper Specification EAST AFRICAN COMMUNITY EAS 2014 second Edition 2014 Copyright notice This EAC document is copyright-protected by EAC. While the reproduction

More information

DRAFT UGANDA STANDARD

DRAFT UGANDA STANDARD DRAFT UGANDA STANDARD DUS DEAS 222 First Edition 2016-mm-dd Knitted polyester/cellulosic blended fabric Specification PUBLIC REVIEW DRAFT Reference number DUS DEAS 222: 2016 UNBS 2016 DUS DEAS 222:2016

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

ISO 534 INTERNATIONAL STANDARD. Paper and board Determination of thickness, density and specific volume

ISO 534 INTERNATIONAL STANDARD. Paper and board Determination of thickness, density and specific volume Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 534 Third edition 2005-02-01 Paper and board Determination of thickness, density and specific volume Papier et carton Détermination de l'épaisseur,

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

DRAFT UGANDA STANDARD

DRAFT UGANDA STANDARD DRAFT UGANDA STANDARD DUS 193-1 First Edition 2018-09-dd Steel wires and wire products for fencing Part 1: Barbed wires Specification Reference number UNBS 2018 Compliance with this standard does not,

More information

raft for comments only Not to be cited as East African Standard FINAL DRAFT EAST AFRICAN STANDARD EAST AFRICAN COMMUNITY

raft for comments only Not to be cited as East African Standard FINAL DRAFT EAST AFRICAN STANDARD EAST AFRICAN COMMUNITY ICS 71.100 HS 3401.19.00 FINAL DRAFT EAST AFRICAN STANDARD Laundry soap Specification EAST AFRICAN COMMUNITY EAS 2011 Second Edition 2011 ii Table of contents Introduction... iv 1 Scope... 1 2 Definitions...

More information

Peel Adhesion of Pressure Sensitive Tape

Peel Adhesion of Pressure Sensitive Tape Harmonized International Standard Peel Adhesion of Pressure Sensitive Tape Call Letters Date of Issuance Revised Revised Revised PSTC 101 10/00 10/03 05/07 11/13 1. SCOPE 1.1 These methods cover the measurement

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

Draft for comments only Not to be cited as East African Standard

Draft for comments only Not to be cited as East African Standard EAST AFRICAN STANDARD Tangential type honey extractor Specification EAST AFRICAN COMMUNITY CD/K/655:2010 ICS 65.140 EAC 2010 First Edition 2010 Foreword Development of the East African Standards has been

More information

ISO 534. Paper and board Determination of thickness, density and specific volume

ISO 534. Paper and board Determination of thickness, density and specific volume Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 534 Fourth edition 2011-11-15 Paper and board Determination of thickness, density and specific volume Papier et carton Détermination de l épaisseur,

More information

ISO Paper Determination of tearing resistance Elmendorf method. Papier Détermination de la résistance au déchirement Méthode Elmendorf

ISO Paper Determination of tearing resistance Elmendorf method. Papier Détermination de la résistance au déchirement Méthode Elmendorf Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 1974 Fourth edition 2012-05-01 Paper Determination of tearing resistance Elmendorf method Papier Détermination de la résistance au déchirement

More information

tbs TDC3 (5614)P 3 Draft Tanzania Standard Textiles Towels Specifications TANZANIA BUREAU OF STANDARDS

tbs TDC3 (5614)P 3 Draft Tanzania Standard Textiles Towels Specifications TANZANIA BUREAU OF STANDARDS tbs TDC3 (5614)P 3 Draft Tanzania Standard Textiles Towels Specifications TANZANIA BUREAU OF STANDARDS 0. Foreword This second edition of this Draft Tanzania Standard has been prepared to help manufacturers

More information

Draft for comments only Not to be cited as East African Standard

Draft for comments only Not to be cited as East African Standard EAST AFRICAN STANDARD CD/K/024-2:2008 ICS 43.040.60 Retro-reflective registration plates for motor vehicles Specification Part 2: Metal EAST AFRICAN COMMUNITY EAC 2010 First Edition 2010 Foreword Development

More information

DRAFT TANZANIA STANDARD. TBS/CDC-2(4970) P3- Carbolic Soap - Specification (Revision of TZS 221:1984)

DRAFT TANZANIA STANDARD. TBS/CDC-2(4970) P3- Carbolic Soap - Specification (Revision of TZS 221:1984) DRAFT TANZANIA STANDARD TBS/CDC-2(4970) P3- Carbolic Soap - Specification (Revision of TZS 221:1984) TANZANIA BUREAU OF STANDARDS Foreword This Draft Tanzania Standard is being developed by the Soap and

More information

Woven interlinings and linings for apparel purposes Specification

Woven interlinings and linings for apparel purposes Specification KENYA STANDARD DKS 214-1: 2017 ICS 59.080 Woven interlinings and linings for apparel purposes Specification Part 1: Woven interlinings for apparal purposes KEBS 2017 SECOND EDITION 2017 TECHNICAL COMMITTEE

More information

EAST AFRICAN STANDARD

EAST AFRICAN STANDARD ICS 77.140.65 HS 7217.12.0000 EAST AFRICAN STANDARD Steel wire products for fencing Specification EAST AFRICAN COMMUNITY EAC 1999 First Edition 1999 Contents Page Foreword...iv 1 Scope...1 2 General requirements...1

More information

ISO INTERNATIONAL STANDARD. Fasteners Non-electrolytically applied zinc flake coatings

ISO INTERNATIONAL STANDARD. Fasteners Non-electrolytically applied zinc flake coatings INTERNATIONAL STANDARD ISO 63 First edition 2000-07-1 Fasteners Non-electrolytically applied zinc flake coatings Éléments de fixation Revêtements non électrolytiques de lamelles de zinc Reference number

More information

ISO 1007 INTERNATIONAL STANDARD. Photography 135-size film and magazine Specifications. Photographie Film et cartouche de format 135 Spécifications

ISO 1007 INTERNATIONAL STANDARD. Photography 135-size film and magazine Specifications. Photographie Film et cartouche de format 135 Spécifications INTERNATIONAL STANDARD ISO 1007 Third edition 2000-06-01 Photography 135-size film and magazine Specifications Photographie Film et cartouche de format 135 Spécifications Reference number ISO 2000 PDF

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

ISO 105-D01 INTERNATIONAL STANDARD. Textiles Tests for colour fastness Part D01: Colour fastness to drycleaning using perchloroethylene solvent

ISO 105-D01 INTERNATIONAL STANDARD. Textiles Tests for colour fastness Part D01: Colour fastness to drycleaning using perchloroethylene solvent INTERNATIONAL STANDARD ISO 105-D01 Fifth edition 2010-05-01 Textiles Tests for colour fastness Part D01: Colour fastness to drycleaning using perchloroethylene solvent Textiles Essais de solidité des coloris

More information

ISO 2808 INTERNATIONAL STANDARD. Paints and varnishes Determination of film thickness. Peintures et vernis Détermination de l'épaisseur du feuil

ISO 2808 INTERNATIONAL STANDARD. Paints and varnishes Determination of film thickness. Peintures et vernis Détermination de l'épaisseur du feuil INTERNATIONAL STANDARD ISO 2808 Fourth edition 2007-02-01 Paints and varnishes Determination of film thickness Peintures et vernis Détermination de l'épaisseur du feuil Reference number ISO 2007 Provläsningsexemplar

More information

ISO INTERNATIONAL STANDARD. Graphic technology Colour and transparency of printing ink sets for fourcolour

ISO INTERNATIONAL STANDARD. Graphic technology Colour and transparency of printing ink sets for fourcolour INTERNATIONAL STANDARD ISO 2846-2 Second edition 2007-12-15 Graphic technology Colour and transparency of printing ink sets for fourcolour printing Part 2: Coldset offset lithographic printing Technologie

More information

Sýnishorn. Leather Tests for colour fastness Colour fastness to migration into polymeric material

Sýnishorn. Leather Tests for colour fastness Colour fastness to migration into polymeric material INTERNATIONAL STANDARD ISO 15701 IULTCS/IUF 442 Second edition 2015-04-15 Leather Tests for colour fastness Colour fastness to migration into polymeric material Cuir Essais de solidité des coloris Solidité

More information

ISO INTERNATIONAL STANDARD. Welding Studs and ceramic ferrules for arc stud welding

ISO INTERNATIONAL STANDARD. Welding Studs and ceramic ferrules for arc stud welding INTERNATIONAL STANDARD ISO 13918 Second edition 2008-02-15 Welding Studs and ceramic ferrules for arc stud welding Soudage Goujons et bagues céramiques pour le soudage à l'arc des goujons Reference number

More information

ISO Paints and varnishes Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity

ISO Paints and varnishes Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity INTERNATIONAL STANDARD ISO 11997-1 Second edition 2005-03-15 Paints and varnishes Determination of resistance to cyclic corrosion conditions Part 1: Wet (salt fog)/dry/humidity Peintures et vernis Détermination

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 139 Second edition 2005-01-15 Textiles Standard atmospheres for conditioning and testing Textiles Atmosphères normales de conditionnement et d'essai Reference number ISO 139:2005(E)

More information

DRAFT UGANDA STANDARD

DRAFT UGANDA STANDARD DRAFT UGANDA STANDARD DUS 1578-2 First Edition 2014-mm-dd Pillows for domestic use Specification Part 2: Plumage filled Reference number DUS 1578-2: 2014 UNBS 2014 DUS 1578-2: 2014 Compliance with this

More information

BUREAU OF INDIAN STANDARDS. Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION

BUREAU OF INDIAN STANDARDS. Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION FOR BIS USE ONLY DOC:CHD 20 (1932)C December 2012 BUREAU OF INDIAN STANDARDS Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION (Not

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13821 First edition 2002-09-01 Corrugated fibreboard Determination of edgewise crush resistance Waxed edge method Carton ondulé Détermination de la résistance à la compression

More information

ISO/IEC INTERNATIONAL STANDARD. Information technology Automatic identification and data capture techniques Bar code master test specifications

ISO/IEC INTERNATIONAL STANDARD. Information technology Automatic identification and data capture techniques Bar code master test specifications INTERNATIONAL STANDARD ISO/IEC 15421 Second edition 2010-06-01 Information technology Automatic identification and data capture techniques Bar code master test specifications Technologies de l'information

More information

SPECIFICATION FOR PAPER STATIONERY ITEMS FOR SCHOOLS ( First Revision of IS 5195)

SPECIFICATION FOR PAPER STATIONERY ITEMS FOR SCHOOLS ( First Revision of IS 5195) FOR BIS USE ONLY DOC:CHD15 (1857)C April 2011 BUREAU OF INDIAN STANDARDS Draft Indian Standard SPECIFICATION FOR PAPER STATIONERY ITEMS FOR SCHOOLS ( First Revision of IS 5195) (Not to be reproduced without

More information

ISO/TC145-IEC/SC3C JWG 11 N 94

ISO/TC145-IEC/SC3C JWG 11 N 94 ISO/TC145-IEC/SC3C JWG 11 N 94 ISO ORGANISATION INTERNATIONALE DE NORMALISATION INTERNATIONAL ORGANIZATION FOR STANDARDIZATION IEC COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE INTERNATIONAL ELECTROTECHNICAL

More information

FOR READY MIXED PAINT, ALUMINIUM, BRUSHING, PRIMING, WATER RESISTANT, FOR WOODWORK

FOR READY MIXED PAINT, ALUMINIUM, BRUSHING, PRIMING, WATER RESISTANT, FOR WOODWORK FOR BIS USE ONLY DOC:CHD 20(1907)C August 2011 BUREAU OF INDIAN STANDARDS Draft Indian Standard SPECIFICATION FOR READY MIXED PAINT, ALUMINIUM, BRUSHING, PRIMING, WATER RESISTANT, FOR WOODWORK (First Revision

More information

ISO 105-F04 INTERNATIONAL STANDARD. Textiles Tests for colour fastness Part F04: Specification for polyester adjacent fabric

ISO 105-F04 INTERNATIONAL STANDARD. Textiles Tests for colour fastness Part F04: Specification for polyester adjacent fabric INTERNATIONAL STANDARD ISO 105-F04 First edition 2001-02-15 Textiles Tests for colour fastness Part F04: Specification for polyester adjacent fabric Textiles Essais de solidité des teintures Partie F04:

More information

Woven interlinings and linings for apparel purposes Specification

Woven interlinings and linings for apparel purposes Specification KENYA STANDARD DKS 08-21: PART 2: 2017 ICS 59.080 Woven interlinings and linings for apparel purposes Specification Part 2: Woven linings for Apparel Purposes KEBS 2017 SECOND EDITION 2 TECHNICAL COMMITTEE

More information

ISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition

ISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This

More information

ISO INTERNATIONAL STANDARD. Steel wire ropes Vocabulary, designation and classification

ISO INTERNATIONAL STANDARD. Steel wire ropes Vocabulary, designation and classification INTERNATIONAL STANDARD ISO 17893 First edition 2004-02-15 Steel wire ropes Vocabulary, designation and classification Câbles en acier Vocabulaire, désignation et classification Reference number ISO 2004

More information

ISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition

ISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E)

More information

ISO 105-B07 INTERNATIONAL STANDARD

ISO 105-B07 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 105-B07 First edition 2009-05-01 Textiles Tests for colour fastness Part B07: Colour fastness to light of textiles wetted with artificial perspiration Textiles Essais de solidité

More information

ISO INTERNATIONAL STANDARD. Hexalobular socket cheese head screws. Vis à métaux à tête cylindrique basse à six lobes internes

ISO INTERNATIONAL STANDARD. Hexalobular socket cheese head screws. Vis à métaux à tête cylindrique basse à six lobes internes INTERNATIONAL STANDARD ISO 14580 First edition 2001-09-01 Hexalobular socket cheese head screws Vis à métaux à tête cylindrique basse à six lobes internes Reference number ISO 14580:2001(E) ISO 2001 PDF

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 4762 Fourth edition 2004-03-01 Hexagon socket head cap screws Vis à tête cylindrique à six pans creux Reference number ISO 4762:2004(E) ISO 2004 PDF disclaimer This PDF file

More information

EAST AFRICAN STANDARD

EAST AFRICAN STANDARD ICS 77.140 EAST AFRICAN STANDARD Pre-painted metal coated steel sheets and coils Specification EAST AFRICAN COMMUNITY EAC 2006 First Edition 2006 Foreword Development of the East African Standards has

More information

ISO INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader

ISO INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader INTERNATIONAL STANDARD ISO 5470-2 First edition 2003-04-15 Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader Supports textiles revêtus de caoutchouc ou

More information

ISO INTERNATIONAL STANDARD. Panneaux à base de bois Détermination du module d'élasticité en flexion et de la résistance à la flexion

ISO INTERNATIONAL STANDARD. Panneaux à base de bois Détermination du module d'élasticité en flexion et de la résistance à la flexion INTERNATIONAL STANDARD ISO 16978 First edition 2003-07-01 Wood-based panels Determination of modulus of elasticity in bending and of bending strength Panneaux à base de bois Détermination du module d'élasticité

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 4026 Third edition 2003-12-01 Hexagon socket set screws with flat point Vis sans tête à six pans creux, à bout plat Reference number ISO 4026:2003(E) ISO 2003 ISO 4026:2003(E)

More information

ISO INTERNATIONAL STANDARD. Oilseed meals Determination of oil content Part 1: Extraction method with hexane (or light petroleum)

ISO INTERNATIONAL STANDARD. Oilseed meals Determination of oil content Part 1: Extraction method with hexane (or light petroleum) Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 734-1 Second edition 2006-11-01 Oilseed meals Determination of oil content Part 1: Extraction method with hexane (or light petroleum) Tourteaux

More information

Part E04: Textiles Tests for colour fastness. Colour fastness to perspiration

Part E04: Textiles Tests for colour fastness. Colour fastness to perspiration INTERNATIONAL STANDARD ISO 105-E04 Sixth edition 2013-03-15 Textiles Tests for colour fastness Part E04: Colour fastness to perspiration Textiles Essais de solidité des coloris Partie E04: Solidité des

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 13079 First edition 2011-07-15 Laboratory glass and plastics ware Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

Compression test of fiberboard shipping containers

Compression test of fiberboard shipping containers T 804 om-97 OFFICIAL TEST METHOD 1981 REVISED 1989 REVISED 1997 1997 TAPPI The information and data contained in this document were prepared by a technical committee of the Association. The committee and

More information

ISO INTERNATIONAL STANDARD. Hexagon bolts with flange with metric fine pitch thread Small series Product grade A

ISO INTERNATIONAL STANDARD. Hexagon bolts with flange with metric fine pitch thread Small series Product grade A INTERNATIONAL STANDARD ISO 15072 First edition 1999-12-15 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique, à filetage

More information

ISO INTERNATIONAL STANDARD. Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties

ISO INTERNATIONAL STANDARD. Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties INTERNATIONAL STANDARD ISO 657-14 Third edition 2000-03-15 Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties Profilés en acier laminés à chaud

More information

ISO INTERNATIONAL STANDARD. Paper and board Determination of bending resistance Part 1: Constant rate of deflection

ISO INTERNATIONAL STANDARD. Paper and board Determination of bending resistance Part 1: Constant rate of deflection INTERNATIONAL STANDARD ISO 2493-1 First edition 2010-11-15 Paper and board Determination of bending resistance Part 1: Constant rate of deflection Papier et carton Détermination de la résistance à la flexion

More information

ISO INTERNATIONAL STANDARD. Wheat and wheat flour Gluten content Part 4: Determination of dry gluten from wet gluten by a rapid drying method

ISO INTERNATIONAL STANDARD. Wheat and wheat flour Gluten content Part 4: Determination of dry gluten from wet gluten by a rapid drying method INTERNATIONAL STANDARD ISO 21415-4 First edition 2006-05-01 Wheat and wheat flour Gluten content Part 4: Determination of dry gluten from wet gluten by a rapid drying method Blé et farines de blé Teneur

More information

ISO INTERNATIONAL STANDARD. Glass in building Silvered, flat-glass mirror. Verre dans la construction Miroir argenté en verre plat

ISO INTERNATIONAL STANDARD. Glass in building Silvered, flat-glass mirror. Verre dans la construction Miroir argenté en verre plat INTERNATIONAL STANDARD ISO 25537 First edition 2008-09-15 Glass in building Silvered, flat-glass mirror Verre dans la construction Miroir argenté en verre plat Reference number ISO 25537:2008(E) ISO 2008

More information

ISO INTERNATIONAL STANDARD. Graphic technology Colour and transparency of printing ink sets for fourcolour

ISO INTERNATIONAL STANDARD. Graphic technology Colour and transparency of printing ink sets for fourcolour INTERNATIONAL STANDARD ISO 2846-2 Second edition 2007-12-15 Graphic technology Colour and transparency of printing ink sets for fourcolour printing Part 2: Coldset offset lithographic printing Technologie

More information

Steel wire for general fencing purposes

Steel wire for general fencing purposes BRITISH STANDARD BS 4102:1998 ICS 77.140.65 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Specification for Steel wire for general fencing purposes Committees responsible for this

More information

ISO 2836 INTERNATIONAL STANDARD. Graphic technology Prints and printing inks Assessment of resistance to various agents

ISO 2836 INTERNATIONAL STANDARD. Graphic technology Prints and printing inks Assessment of resistance to various agents INTERNATIONAL STANDARD ISO 2836 Third edition 2004-03-15 Graphic technology Prints and printing inks Assessment of resistance to various agents Technologie graphique Impressions et encres d imprimerie

More information

GB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE

GB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE Translated English of Chinese Standard: GB/T4851-2014 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.180 Z 38 GB/T 4851-2014 Replacing GB

More information

ISO INTERNATIONAL STANDARD. Paper and board Determination of roughness/smoothness (air leak methods) Part 4: Print-surf method

ISO INTERNATIONAL STANDARD. Paper and board Determination of roughness/smoothness (air leak methods) Part 4: Print-surf method INTERNATIONAL STANDARD ISO 8791-4 Second edition 2007-11-15 Paper and board Determination of roughness/smoothness (air leak methods) Part 4: Print-surf method Papier et carton Détermination de la rugosité/du

More information

Draft for comments only Not to be cited as East African Standard

Draft for comments only Not to be cited as East African Standard Filled bar soap Specification EAST AFRICAN STANDARD EAST AFRICAN COMMUNITY CD/K/806:2010 ICS 71.100.40 EAC 2010 First Edition 2010 Foreword Development of the East African Standards has been necessitated

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 4019 Second edition 2001-09-01 Structural steels Cold-formed, welded, structural hollow sections Dimensions and sectional properties Aciers de construction Profils creux pour

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 294-4 Second edition 2001-12-15 Plastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage Plastiques Moulage par injection

More information

ISO 105-X18 INTERNATIONAL STANDARD. Textiles Tests for colour fastness Part X18: Assessment of the potential to phenolic yellowing of materials

ISO 105-X18 INTERNATIONAL STANDARD. Textiles Tests for colour fastness Part X18: Assessment of the potential to phenolic yellowing of materials INTERNATIONAL STANDARD ISO 105-X18 First edition 2007-09-01 Textiles Tests for colour fastness Part X18: Assessment of the potential to phenolic yellowing of materials Textiles Essais de solidité des teintures

More information

Quality Levels for Forms. Manager, Printing Procurement Division Constitution Square 360 Albert St., 12th Floor Ottawa, Ontario, K1A 0S5, CANADA

Quality Levels for Forms. Manager, Printing Procurement Division Constitution Square 360 Albert St., 12th Floor Ottawa, Ontario, K1A 0S5, CANADA Quality Levels for Forms Manager, Printing Procurement Division Constitution Square 360 Albert St., 12th Floor Ottawa, Ontario, K1A 0S5, CANADA TABLE OF CONTENTS 1. INTRODUCTION 2. FLAT FORMS Quality Levels

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 105-D02 Fifth edition 2016-06-01 Textiles Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents Textiles Essais de solidité des coloris Partie D02:

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15547-1 First edition 2005-11-01 Petroleum, petrochemical and natural gas industries Plate-type heat exchangers Part 1: Plate-and-frame heat exchangers Industries du pétrole,

More information

ISO INTERNATIONAL STANDARD. Photography Root mean square granularity of photographic films Method of measurement

ISO INTERNATIONAL STANDARD. Photography Root mean square granularity of photographic films Method of measurement INTERNATIONAL STANDARD ISO 10505 First edition 2009-05-15 Photography Root mean square granularity of photographic films Method of measurement Photographie Moyenne quadratique granulaire de films photographiques

More information

ISO ISO ISO ISO TC 8888/SC 1111/ WG 1/ N393N

ISO ISO ISO ISO TC 8888/SC 1111/ WG 1/ N393N ISO 2014 All rights ISO 2014 All rights ISO 2014 All rights ISO 2014 All rights ISO ISO ISO ISO TC 8888/SC 1111/ WG 1/ N393N 249418 Date: 20164-0412-2111 ISO/FDIS 18079-3 ISO ISO ISO ISO TC 8888/SC 1111/WG

More information

ISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type

ISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type INTERNATIONAL STANDARD ISO 7465 Third edition 21-12-1 Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type Ascenseurs et monte-charge Guides de cabine et de contrepoids

More information

ISO INTERNATIONAL STANDARD. Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C

ISO INTERNATIONAL STANDARD. Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C INTERNATIONAL STANDARD ISO 4759-1 Second edition 2000-11-15 Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C Tolérances des éléments de fixation Partie 1: Vis, goujons

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 18055-1 First edition 2004-06-01 Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film) Photographie et

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 18915 First edition 2000-12-15 Imaging materials Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation Matériaux pour image

More information

ISO ~ISOJ INTERNATIONAL STANDARD. Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) - --

ISO ~ISOJ INTERNATIONAL STANDARD. Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) - -- INTERNATIONAL STANDARD ISO 868 Third edition 2003-03-01 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) Plastiques et ebonite -- Determination de la

More information

ISO INTERNATIONAL STANDARD. Textiles Water resistance Rain tests: exposure to a horizontal water spray

ISO INTERNATIONAL STANDARD. Textiles Water resistance Rain tests: exposure to a horizontal water spray INTERNATIONAL STANDARD ISO 22958 First edition 2005-03-15 Textiles Water resistance Rain tests: exposure to a horizontal water spray Textiles Résistance à l'eau Essai d'arrosage: exposition à une pulvérisation

More information

ISO INTERNATIONAL STANDARD. Non-destructive testing of welds Radiographic testing of fusionwelded

ISO INTERNATIONAL STANDARD. Non-destructive testing of welds Radiographic testing of fusionwelded INTERNATIONAL STANDARD ISO 17636 First edition 2003-09-15 Non-destructive testing of welds Radiographic testing of fusionwelded joints Contrôle non destructif des assemblages soudés Contrôle par radiographie

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 23713 First edition 2005-07-01 Pulps Determination of fibre coarseness by automated optical analysis Polarized light method Pâtes Détermination

More information

ISO INTERNATIONAL STANDARD. Graphic technology Plates for offset printing Dimensions

ISO INTERNATIONAL STANDARD. Graphic technology Plates for offset printing Dimensions INTERNATIONAL STANDARD ISO 12635 Second edition 2008-12-01 Graphic technology Plates for offset printing Dimensions Technologie graphique Plaques pour impression offset Dimensions Reference number ISO

More information

ISO INTERNATIONAL STANDARD. Hexagon socket head cap screws with metric fine pitch thread. Vis à tête cylindrique à six pans creux à pas fin

ISO INTERNATIONAL STANDARD. Hexagon socket head cap screws with metric fine pitch thread. Vis à tête cylindrique à six pans creux à pas fin INTERNATIONAL STANDARD ISO 12474 First edition 2010-10-01 Hexagon socket head cap screws with metric fine pitch thread Vis à tête cylindrique à six pans creux à pas fin Reference number ISO 12474:2010(E)

More information

ISO INTERNATIONAL STANDARD. Paints and varnishes Determination of the volatile organic compound content of low-voc emulsion paints (in-can VOC)

ISO INTERNATIONAL STANDARD. Paints and varnishes Determination of the volatile organic compound content of low-voc emulsion paints (in-can VOC) INTERNATIONAL STANDARD ISO 17895 First edition 2005-03-15 Paints and varnishes Determination of the volatile organic compound content of low-voc emulsion paints (in-can VOC) Peintures et vernis Détermination

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 12947-1 First edition 1998-12-15 Textiles Determination of the abrasion resistance of fabrics by the Martindale method Part 1: Martindale abrasion testing apparatus Textiles

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 20860-1 First edition 2008-10-15 Road vehicles 50 Ω impedance radio frequency connection system interface Part 1: Dimensions and electrical requirements

More information

ISO INTERNATIONAL STANDARD. Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances

ISO INTERNATIONAL STANDARD. Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances INTERNATIONAL STANDARD ISO 10285 Second edition 2007-11-01 Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances Roulements Roulements linéaires à recirculation de billes,

More information

ISO INTERNATIONAL STANDARD. Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 2: Modified Martindale method

ISO INTERNATIONAL STANDARD. Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 2: Modified Martindale method INTERNATIONAL STANDARD ISO 12945-2 First edition 2000-07-01 Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 2: Modified Martindale method Textiles Détermination de la

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 28723 First edition 2008-10-15 Vitreous and porcelain enamels Determination of the edge covering on enamelled steel plate to be used in heat exchangers Émaux vitrifiés Détermination

More information

ISO/IEC JTC 1/SC 29 N 16019

ISO/IEC JTC 1/SC 29 N 16019 ISO/IEC JTC 1/SC 29 N 16019 ISO/IEC JTC 1/SC 29 Coding of audio, picture, multimedia and hypermedia information Secretariat: JISC (Japan) Document type: Title: Status: Text for PDAM ballot or comment Text

More information

ISO INTERNATIONAL STANDARD. Textiles Determination of resistance to water penetration Impact penetration test

ISO INTERNATIONAL STANDARD. Textiles Determination of resistance to water penetration Impact penetration test INTERNATIONAL STANDARD ISO 18695 First edition 2007-11-15 Textiles Determination of resistance to water penetration Impact penetration test Textiles Détermination de la résistance à la pénétration de l'eau

More information

ISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type

ISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type INTERNATIONAL STANDARD ISO 7465 Fourth edition 27-11-15 Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type Ascenseurs et monte-charges Guides de cabine et de contrepoids

More information

ISO INTERNATIONAL STANDARD. Coating powders Part 13: Particle size analysis by laser diffraction

ISO INTERNATIONAL STANDARD. Coating powders Part 13: Particle size analysis by laser diffraction INTERNATIONAL STANDARD ISO 8130-13 First edition 2001-09-01 Coating powders Part 13: Particle size analysis by laser diffraction Poudres pour revêtement Partie 13: Analyse granulométrique par diffraction

More information

GB/T Translated English of Chinese Standard: GB/T

GB/T Translated English of Chinese Standard: GB/T Translated English of Chinese Standard: GB/T4808.2-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 9.080.30 W04 GB/T 4802.2-2008 Replacing

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 7380-2 First edition 2011-08-01 Button head screws Part 2: Hexagon socket button head screws with collar Vis à tête cylindrique bombée plate Partie 2: Vis à tête cylindrique

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 11798 First edition 1999-07-01 Information and documentation Permanence and durability of writing, printing and copying on paper Requirements and test methods Information et

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 1452-2 First edition 2009-12-01 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride)

More information