TTRM1004-D MHZ 25W BI-DIRECTIONAL AMPLIFIER

Size: px
Start display at page:

Download "TTRM1004-D MHZ 25W BI-DIRECTIONAL AMPLIFIER"

Transcription

1 TTRM00-D MHZ 5W BI-DIRECTIONL MPLIFIER DESCRIPTION This class B LDMOS module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation format, including but not limited to -G telecom, WLN, OFDM, DVB, and CW/M/FM. The latest device technologies and design methods are employed to offer high power density, efficiency, and linearity in a small, lightweight package. FETURES uto Tx/Rx Switching (RF Detect) Optional Heatsink Specifications subject to change without notice. Typical performance at +8VDC at 5 o C in a 50Ω system TX SPECIFICTIONS PRMETER MIN TYP. MX UNIT Operating Frequency MHz PSat Power Output +.0 dbm Gain db Gain Flatness.0 ± db Input Return Loss - -6 db Operating Voltage VDC Current Draw. Tx / Rx Switching Time.0.0 us Fill space Fill space Fill space Fill space RX SPECIFICTIONS PRMETER MIN TYP. MX UNIT PdB Power Output +5.0 dbm Gain 5.0 db Gain Flatness 0.5. ± db Noise Figure.0.0 db OIP +5.0 dbm Input Return Loss - - db Current Draw m Triad RF Systems Inc. Harts Ln, Suite i, East Brunswick, NJ 0886 Tel: -(855) x sales@triadrf.com rev 0//6

2 TTRM00-D MHZ 5W BI-DIRECTIONL MPLIFIER MECHNICL PRMETER VLUE UNIT Dimensions (L x W x H). x.69 x 0.65 in RF Connectors (Input / Output) SM-F / SM-F -- DC / Control Connector Circular Locking -- Cooling Baseplate Conduction - Optional Heatsink vailable -- Mounting -0 Thru Holes -- Weight 5 oz. Weight With Heatsink 5 oz. ENVIRONMENTL / PROTECTIONS PRMETER MIN MX UNIT Operating Temp. (Housing Temp.) C Storage Temp Range C Humidity Range 0-00 % ltitude 0-0,000 ft. Shock / Vibration MIL-STD-80 and equivalents -- Max RF Input +0 dbm Load PdB Open / Short Output Protection -- P Baseplate Shutoff Temperature +90 C DC / CONTROL PINS PIN LBEL NME DESCRIPTION N/C Not Connected (uto Switching Unit) GND Ground +VDC Supply Voltage - Range Specified in Datasheet Triad RF Systems Inc. Harts Ln, Suite i, East Brunswick, NJ 0886 Tel: -(855) x sales@triadrf.com rev 0//6

3 TTRM00-D MHZ 5W BI-DIRECTIONL MPLIFIER 80-G (0 MHZ BW) DT RTE VS. OUTPUT POWER OFDM MODULTION DT RTE POUT (W) MIN. EVM 6QM 5 Mbps db 6QM 6 Mbps. - db QPSK Mbps.59-5 db BPSK 9 Mbps db See our application note that describes how this table was calculated and provides notes on in-system performance FILL High-Level Block Diagram Power mplifier RDIO Input Detector RF SWITCH CONTROL FET BIS RF SWITCH NTENN Low Noise mplifier Suffix D0 D0 DXX Ordering Guide Configuration Information Model Number mplifier Option Heat Sink Option TTRMXXXX - XXX - XXX mplifier Options Description utomatic Tx/Rx Switching Manual Tx/Rx Switching Custom mplifier Configuration (issued by Triad upon customer request) Suffix (none) HS HSF HSX Heat Sink Options Description No Heat Sink Included Standard Heat Sink Heat Sink with Integrated Cooling Fan Custom Heat Sink Configuration Triad RF Systems Inc. Harts Ln, Suite i, East Brunswick, NJ 0886 Tel: -(855) x sales@triadrf.com rev 0//6

4 B C D E REVISIONS REV DESCRIPTION DTE PPROVED 0 INITIL RELESE 08/0/0 DMC RDIO J - R/T - GND - +VDC NTENN THRU (x) RDIO J NTENN DRWN H 6/7/0 DESIGNED DCH 7//0 CHECKED BG 6/7/0 ENG PPROVED MFG PPROVED 80 TICES LNE BUILDING, SUITE 07 EST BRUNSWICK, NJ HOUSING OUTLINE DRWING 8 DIMENSIONS RE IN INCHES UNLESS SPECIFIED OTHERWISE TOLERNCES SIZE DWG NO. OL_8 REV 0 B C DECIMLS.XX.0.XXX.005 FRCTIONS / NGLES D SCLE: NONE CGE CODE 67DZ E SHEET OF

5 B C D E OPTIONL HETSINK THRU (X) RDIO J NTENN DRWN H 6/7/0 DESIGNED DCH 7//0 HOUSING OUTLINE DRWING 8 B C CHECKED BG 6/7/0 ENG PPROVED MFG PPROVED D SIZE DWG NO. SCLE: NONE OL_8 CGE CODE 67DZ E SHEET OF REV 0

6 B C D E DETIL PINOUT TBLE PIN LBE FUNCTION R/T RX/TX GND GROUND WIRE +DC SUPPLY VOLTGE NOTES:. VIEW FCING CONNECTOR INTERFCE (MP SIDE).. P/N OF CONNECTOR ON MPLIFIER: HIROSE LF07WBP-P.. UNIT SHOWN WITH OPTIONL HETSINK. B C DRWN H 6/7/0 DESIGNED DCH 7//0 CHECKED BG 6/7/0 ENG PPROVED MFG PPROVED D SIZE DWG NO. HOUSING OUTLINE DRWING 8 OL_8 SCLE: NONE CGE CODE 67DZ SHEET E OF REV 0

TTRM MHZ 20W BI- DIRECTIONAL AMPLIFIER

TTRM MHZ 20W BI- DIRECTIONAL AMPLIFIER TTRM00 800-000MHZ 0W BI- DIRECTIONL MPLIFIER DESCRIPTION This class B LDMOS module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation

More information

TTRM MHZ 16W BI-DIRECTIONAL AMPLIFIER

TTRM MHZ 16W BI-DIRECTIONAL AMPLIFIER TTRM08 700-800MHZ 6W BI-DIRECTIONL MPLIFIER DESCRIPTION This class Gas module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation format,

More information

TTRM MHZ 100W BI-DIRECTIONAL AMPLIFIER

TTRM MHZ 100W BI-DIRECTIONAL AMPLIFIER TTRM096 00-00MHZ 00W BI-DIRECTIONL MPLIFIER DESCRIPTION This class B LDMOS module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation format,

More information

TTRM MHZ 3W BI- DIRECTIONAL AMPLIFIER

TTRM MHZ 3W BI- DIRECTIONAL AMPLIFIER TTRM00 0-000MHZ W I- IRTIONL MPLIFIR SRIPTION This class Gas module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation format, including

More information

RF / ELECTRICAL PARAMETER MIN TYP MAX UNIT

RF / ELECTRICAL PARAMETER MIN TYP MAX UNIT TL00 800-000 MHz 5W Linear Power mplifier SRIPTION This class Gas module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation format, including

More information

12B01A-09 S-Band Solid State Power Amplifier

12B01A-09 S-Band Solid State Power Amplifier 12B1A-9 S-Band Solid State Power Amplifier Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 2. GHz - 2.5 GHz P/N: NW-PA-12B1A-9 The NuPower 12B1A-9 is a small, highly efficient solid state power amplifier that

More information

12B01A L- & S-Band Solid State Power Amplifier

12B01A L- & S-Band Solid State Power Amplifier 12B1A L- & S-Band Solid State Power Amplifier 1 Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 1. GHz - 2.5 GHz P/N: NW-PA-12B1A (includes NW-PA-ACC-CB9MA interface cable) The NuPower 12B1A is a small, highly

More information

C20R01 C-Band Solid State Power Amplifier

C20R01 C-Band Solid State Power Amplifier C20R01 C-Band Solid State Power Amplifier 20 Watts CW, 4.4 GHz - 4.9 GHz 2 Watts Linear, 4% EVM @ 33 dbm P/N: NW-PA-C-20-R01 (Includes NW-PA-ACC-CB09MC interface cable) The NuPower C20R01 is a small, highly

More information

12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level

12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level 12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level 10 Watts (CW) 1.0-2.5 GHz P/N: NW-PA-12B01A-D30 (Replaces P/N: NW-SSPA-10W-1.0-2.5-D30) The NuPower 12B01A-D30 is a small,

More information

12D05A L- & S-Band Solid State Power Amplifier

12D05A L- & S-Band Solid State Power Amplifier 12D05A L- & S-Band Solid State Power Amplifier 35 Watts CW @ 1.7 GHz to 2.1 GHz 20 Watts CW @ 2.1 GHz to 2.4 GHz P/N: NW-PA-12D05A (Includes NW-PA-ACC-CB09MC interface cable) The NuPower 12D05A is a small,

More information

NuPower TM. 11B02A Mini Multi-Octave Power Amplifier. Features. Applications. Benefits. 10 Watt CW 200 MHz MHz P/N: NW-PA-11B02A

NuPower TM. 11B02A Mini Multi-Octave Power Amplifier. Features. Applications. Benefits. 10 Watt CW 200 MHz MHz P/N: NW-PA-11B02A 11B02A Mini Multi-Octave Power Amplifier 10 Watt CW - 2600 MHz P/N: NW-PA-11B02A (includes NW-PA-ACC-CB09ME interface cable) The NuWaves NuPower TM 11B02A is a highly efficient, miniature solid state power

More information

12B04A L- & S-Band Bidirectional Amplifier

12B04A L- & S-Band Bidirectional Amplifier NuPower Xtender TM 12B4A L- & S-Band Bidirectional Amplifier Watt CW 2. Watts Linear, % EVM @ 34 dbm 1. GHz - 2. GHz P/N: NW-BA-12B4A (includes NW-BA-ACC-CB9MA) The NuPower Xtender TM 12B4A is a small,

More information

SPECIFICATION OUTLINE

SPECIFICATION OUTLINE ECO DESCRIPTION DTE BY 001 5479 PRODUCTION RELESE 10/02/2009 GF 5663 OMIT PRODUCT ND SERIL NUMBER LBEL DETIL REPLCE PPROPRITE SE REFERENCES WITH ISO REFERENCES ENHNCE REGULTORY REQUIREMENTS TBLE 5/26/2010

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS 50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.

More information

SPECIFICATION OUTLINE

SPECIFICATION OUTLINE ISIONS ECO DESCRIPTION DTE BY 001 5340 PRODUCTION RELESE 4/23/09 GF 002 5541 OMIT GREEN e MRK DD ORNGE 50 MRK DD WWW.SUREPOWER.COM LOGO TO PRODUCT LBEL 11/19/09 JT 5627 OMIT PRODUCT ND SERIL NUMBER LBEL

More information

SPECIFICATION OUTLINE

SPECIFICATION OUTLINE ISIONS ECO DESCRIPTION DTE BY 003 5340 DD SPECIFICTION FOR THERML CYCLE ND THERML SHOCK DD e11 03 4947 COMPLINCE MRK DD WEIGHT 4/23/09 GF 004 5465 OMIT GREEN e MRK DD ORNGE 50 MRK DD WWW.SUREPOWER.COM

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS 80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion

More information

HILNA V1 Low Noise Amplifier

HILNA V1 Low Noise Amplifier HILNA V1 Low Noise Amplifier 50-1000 MHz db Gain P/N: HILNA-V1 (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA V1 is the first in its class of broadband low noise amplifiers designed to achieve

More information

HILNA LS Low Noise Amplifier

HILNA LS Low Noise Amplifier HILNA LS Low Noise Amplifier 1000-3000 MHz 50 db Gain P/N: HILNA-LS (includes NW-LN-ACC-CB4MUA interface cable) NuWaves HILNA LS is a broadband low noise amplifier covering L- & S-bands, and designed to

More information

4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz

4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz 4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)

More information

HILNA GPS Low Noise Amplifier

HILNA GPS Low Noise Amplifier HILNA GPS Low Noise Amplifier 1200-1600 MHz 32 db Gain P/N: HILNA-GPS (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA GPS is a broadband low noise amplifier designed to achieve high gain while

More information

05D / RCPxxxxxX High Power Wide Band Load Return Loss Detector

05D / RCPxxxxxX High Power Wide Band Load Return Loss Detector PxxxxxX High Power Wide Band Load Return Loss Detector Features Unique coupler structure for wide band high directivity operation. Internal Detector and comparator with variable trip voltage for R/L measurement

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Voltage Control Phase Shifter 2-4GHz Features Wide Band Operation 2-4GHz 360 Phase Shift Low Insertion Loss and Low Phase Error Singe Control Operation Customization available upon request Electrical Specifications,

More information

FEU (Front End Unit) for Optic Repeater

FEU (Front End Unit) for Optic Repeater FEU (Front End Unit) for Optic Repeater 1. Specification 1.1. All Items Parameter Specification Comments RX1 RX2 TX Frequency Range. 1750.625 ~ 1769.375MHz 1750.625 ~ 1769.375MHz 1840.625 ~ 1859.375MHz

More information

100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db

100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db 100W Wide Band Power Amplifier 6GHz~18GHz Features Wideband Solid State Power Amplifier Psat: +50dBm Gain: 75 db Typical Supply Voltage: +48V On board microprocessor driven bias controller. Electrical

More information

5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V

More information

GENERAL RELEASE DOCUMENT CONSULT FACTORY FOR CURRENT REVISION

GENERAL RELEASE DOCUMENT CONSULT FACTORY FOR CURRENT REVISION REVISIONS REVISION DESCRIPTION PPROVED DTE 1.0 Preliminary Luis Vargas 8/13/2010 GENERL RELESE DOCUMENT CONSULT FCTORY FOR CURRENT REVISION SPECIFICTION CONTROL DRWING PREPRED BY: DTE UNLESS OTHERWISE

More information

30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V

More information

FMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA.

FMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA. 48 Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 m IP3 and SMA FMAM5032 is a high gain Class A/AB GaN Linear Power Amplifier operating in the 500 to 3000 MHz

More information

8W Wide Band Power Amplifier 1GHz~22GHz

8W Wide Band Power Amplifier 1GHz~22GHz 8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications

More information

2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range

2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range 2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz Features Wideband Solid State Power Amplifier Gain: 37dB Typical Psat 35dBm Typical Electrical Specifications, TA = +25⁰C, Vcc = +12V. Parameter Min. Typ.

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Reflective Coaxial SP2T Switch 50 700MHz Electrical Specifications, TA = +25 C, Vdd = +5V/-28V, TTL = 0 / +5V Description Features Wide Band Operation 50-700MHz TTL compatible driver included Fast Switching

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Absorptive Voltage Controlled Attenuator 4-8GHz Features Wide Band Operation 4-8GHz Wide Attenuation Range 30dB Absorptive Topology Singe Control Operation Electrical Specifications, T A = 25 C Description

More information

Wulfsberg Electronics Division A Chelton Group Company RESOLVING RADIO INTERFERANCE PROBLEMS REVISIONS 7/7/98.

Wulfsberg Electronics Division A Chelton Group Company RESOLVING RADIO INTERFERANCE PROBLEMS REVISIONS 7/7/98. REV PPROVLS DTE REVISIONS SH 1 DRWN CHECKED Robert DeLong Steve Elliott 7/7/98 7/7/98 REV DESCRIPTION DTE PPROVED INITIL RELESE ENGINEER Robert DeLong 7/7/98 150-040051 ISSUED Steve Elliott 7/7/98 DOC

More information

Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System

Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Power Amplifier 0.7GHz ~ 6GHz Features Gain: 35dB typical Output power 38dBm typical High P1dB: 35 dbm Full Band Supply Voltage: 28V 50 Ohm Matched Electrical Specifications, T A = 25⁰C,

More information

J. Colville

J. Colville ITEM NO. SQ-00 PRT NUMBER DESCRIPTION End Tube Clamp - Lower Vendor QTY. 2 2 SQ-002 End Tube Clamp - Upper 2 SQ-00 Modified luminum Straw ilikethatsticker.com 5 SQ-00 DJI NZ-M Lite Motor Mount Rev B Flight

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Absorptive Coaxial SP3T Switch 0.5-50GHz Electrical Specifications, T A = +25 C, Vdd = +5V/-5V, TTL = 0 / +5V Description PN: SP3T Absorptive Switch Low Power Cold Switching Parameter Min Typ Max Min Typ

More information

Solid State General Communication Power Amplifier

Solid State General Communication Power Amplifier The GCS1D2GUT (SKU 4062) is suitable for broadband high power linear applications in the HF frequency range. This rack mount amplifier utilizes pushpull MOSFET power devices that provide high gain, wide

More information

30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 30W Wideband Solid State Power Amplifier 6-12GHz Electrical Specifications, TA = +25⁰C, Vdd = +36V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 6 9 10 12 GHz Gain 60 55 db

More information

20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz.

20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz. 20W Solid State Power Amplifier 26.2GHz~34GHz Features Wideband Solid State Power Amplifier Gain: 65dB Typical Psat: +43dBm Typical Supply : +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V Typical

More information

Main Features: ERZ-LNA Typical applications: Performance

Main Features: ERZ-LNA Typical applications: Performance Main Features: Frequency Range: 2 to 45 GHz. Typical values: Gain 15 db, NF 5 db RF connectors (I/O): 2.4 mm Solder filtered pins for DC connection Several mounting options Gold platted compact aluminum

More information

SDA SMA DATA SHEET

SDA SMA DATA SHEET 0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz The is a Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator with

More information

Efficiency: 68% Temperature Range: +0 to 60 C Max VSWR: 5:1. Class: Supply Voltage:

Efficiency: 68% Temperature Range: +0 to 60 C Max VSWR: 5:1. Class: Supply Voltage: Part Number Revision 2.C Release Date July 11 2007 Revision Notes - updated new format Amplifier Name Technical Specifications Summary Frequency Range: P1dB: Class: Supply Voltage: 88-108 MHz 750 Watts

More information

2 GHz to 6 GHz, 500 W Power Amplifier HMC8113

2 GHz to 6 GHz, 500 W Power Amplifier HMC8113 Data Sheet FEATURES 2 GHz to 6 GHz frequency range 85 db typical small signal gain 57 dbm typical saturated output power 61 db gain control range with 1 db LSB Standard 5U 19-inch rack chassis (per EIA-310D)

More information

Frequency Range: MHz. Efficiency: 80% Temperature Range: -20 to 65 C Max VSWR: 3:1. Class: Supply Voltage: 32.0V

Frequency Range: MHz. Efficiency: 80% Temperature Range: -20 to 65 C Max VSWR: 3:1. Class: Supply Voltage: 32.0V Part Number Revision 0.B Release Date October 19, 2007 Revision Notes Final production release Amplifier Name Technical Specifications Summary Frequency Range: 86-108 MHz P1dB: 500 Watts CW Class: C Supply

More information

MITEQ, Inc. AMF AMPLIFIERS TYPICAL ACCEPTANCE TEST PROCEDURES USING MANUAL METHOD

MITEQ, Inc. AMF AMPLIFIERS TYPICAL ACCEPTANCE TEST PROCEDURES USING MANUAL METHOD DSH NO. PPLICTION NEXT SSY USED ON REVISIONS LTR DESCRIPTION DTE PPROVED INITIL RELESE 3/28/2006 MEron MITEQ, Inc. MF MPLIFIERS TYPICL CCEPTNCE TEST PROCEDURES USING MNUL METHOD LL PGES RE OF ORIGINL ISSUE

More information

ZHL-4W-422+ Mini-Circuits P.O. Box , Brooklyn, NY (718)

ZHL-4W-422+ Mini-Circuits   P.O. Box , Brooklyn, NY (718) Coaxial High Power Amplifier Ω 4W 0 to 4200 MHz Features High power, 4Watt Excellent IP3, +44 dbm typ. Excellent IP2, +45 dbm typ. High efficiency, % typ. at saturation Class A amplifier No damage with

More information

4206 PA25-UHF-40. Frequency Range: MHz. Efficiency: 10% Temperature Range: -18 to 65 C Max VSWR: 10:1. Class: Supply Voltage: 32.

4206 PA25-UHF-40. Frequency Range: MHz. Efficiency: 10% Temperature Range: -18 to 65 C Max VSWR: 10:1. Class: Supply Voltage: 32. Part Number Revision 0.b Release Date July 24, 2007 This document applies to 4206 and 3692 and 5208 Revision Notes Updated Mechanical Specifications Amplifier Name Technical Specifications Summary Frequency

More information

High Power Amplifier, Solid State, Broadband MHz, 51dB Gain, SMA Female Connectors, 1dB GCP. RAMP M-51d-Sf-80W-e7

High Power Amplifier, Solid State, Broadband MHz, 51dB Gain, SMA Female Connectors, 1dB GCP. RAMP M-51d-Sf-80W-e7 ELECTRICAL SPECIFICATIONS @ +28 VDC, 25 C, 50 Ω System Parameter Symbol Min Typ Max Units Operating Frequency BW 20 1000 MHz Power Output CW P SAT 100 125 Watt Power Output @ 1 db Gain Compression Point

More information

20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units

20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units 7-3 RF-LAMBDA 20W Solid State Power Amplifier 6-18GHz Electrical Specifications, TA = +25⁰C Vcc = +36V Features Psat: + 43.5dBm Gain: 51 db Supply Voltage: +36V 50 Ohm Matched Short Haul / High Capacity

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units 25W Wide Band Power Amplifier 20-6000MHz Features Wideband Solid State Power Amplifier Psat: +45dBm Typical Gain: 50dB Typical Supply Voltage: +60V DC Electrical Specifications, T A =25 Parameter Min.

More information

MODEL SELECTION. Model Name Vin(Vdc) Vout(Vdc) Io(Amps) Watts SV SV * SV SV SV SV FEATURES

MODEL SELECTION. Model Name Vin(Vdc) Vout(Vdc) Io(Amps) Watts SV SV * SV SV SV SV FEATURES World's Most dvanced High Density DC-DC Converters. MODEL SELECTION Size: 60.70mm x 57.91mm x 13.30mm (2.39in. x 2.28in. x 2in.) Model Name Vin(Vdc) Vout(Vdc) Io(mps) Watts SV48-5-30-1 36-75 5 6 30 SV48-5-50-1

More information

GENERAL RELEASE DOCUMENT CONSULT FACTORY FOR CURRENT REVISION

GENERAL RELEASE DOCUMENT CONSULT FACTORY FOR CURRENT REVISION REVISIONS REVISION DESCRIPTION PPROVED DTE 1.0 Preliminary Luis Vargas 8/13/2010 GENERL RELESE DOCUMENT CONSULT FCTORY FOR CURRENT REVISION SPECIFICTION CONTROL DRWING UNLESS OTHERWISE SPECIFIED, DIMENSIONS

More information

Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V

Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain:

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Electrical Specifications, T A =25 Ultra Wide Band Low Noise Amplifier AC 110V/220V 0.01-20GHz Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 10 10 20 GHz Gain 28 30 26 28 db Gain

More information

Revision 1.b Release Date July 29, 2007 This data sheet covers models 4379, 4472 Revision Notes Repl 0.d (Rev p/n 250W, B version of Comb)

Revision 1.b Release Date July 29, 2007 This data sheet covers models 4379, 4472 Revision Notes Repl 0.d (Rev p/n 250W, B version of Comb) Part Number Revision 1.b Release Date July 29, 2007 This data sheet covers models 4379, 4472 Revision Notes Repl 0.d (Rev p/n 250W, B version of Comb) Amplifier Name Technical Specifications Summary Frequency

More information

Features. = +25 C, Vdc = +5V

Features. = +25 C, Vdc = +5V amplifiers Typical Applications The HMC-C is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram v.7 HMC-C Features Ultra Low Phase Noise: -6 dbc/hz @ khz Noise Figure:

More information

dbm Supply Current (Idd) (Vdd=+36V)

dbm Supply Current (Idd) (Vdd=+36V) Ka Band 6W Power Amplifier 28GHz~42GHz High output power Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified

More information

Ka-Band SSPA TSA GHz Airborne Applications

Ka-Band SSPA TSA GHz Airborne Applications Ka-Band SSPA Airborne Applications Description This is a compact GaN based Hermetically Sealed SSPA which produces 12W minimum Linear Power 1 (16W typical) over the entire 29-31GHz bandwidth. Features:

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS 100W Coaxial Microwave Power Amplifier 20MHz~520MHz Features Small signal open loop gain: 50dB Output power 100W typical Electrical Specifications, T A = +25 C Typical Applications Suitable for RFI, EMC

More information

4662 P250-UHF-14-A. Frequency Range: MHz. Efficiency: 38% Temperature Range: -10 to 55 C Max VSWR: 3:1. Supply Voltage: 32.

4662 P250-UHF-14-A. Frequency Range: MHz. Efficiency: 38% Temperature Range: -10 to 55 C Max VSWR: 3:1. Supply Voltage: 32. Part Number Revision 0.B Release Date November 5, 2007 This data sheet applies to models 4662, 4978 Revision Notes Updated Mechanical information. Revised Specification (formal production release) Amplifier

More information

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

Features. = +25 C, +Vdc = +6V, -Vdc = -5V v3.7 WIDEBAND LNA MODULE, - 2 GHz amplifiers Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Industrial Sensors Functional

More information

DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units

DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units 7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT

More information

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier AC 1V/2V 0.0~ Electrical Specifications, T A =2 Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 1 1 3 GHz Gain 33 36 33 36 db Gain Flatness ±1. ±1.0

More information

4454 P500-UHF-17-A. Frequency Range: MHz. Efficiency: 36% Temperature Range: -10 to 55 C Max VSWR: 3:1. Supply Voltage: 32.

4454 P500-UHF-17-A. Frequency Range: MHz. Efficiency: 36% Temperature Range: -10 to 55 C Max VSWR: 3:1. Supply Voltage: 32. Part Number Revision 0.e Release Date December 13, 2007 This document applies to 4454 and 5029 Revision Notes: 0.b Full production release, Apr 07. 0.c Revised Specs May 07. Revised Integration Instructions

More information

Frequency Range MHz. Gain db. Gain Flatness ±0.9 ±1.4 db. Output Power at 1dB compression dbm

Frequency Range MHz. Gain db. Gain Flatness ±0.9 ±1.4 db. Output Power at 1dB compression dbm Coaxial Amplifier Ω Medium High Power 10 to 1000 MHz Features wideband, 10 to 1000 MHz high IP3, +42 dbm typ. medium high power, 28 db min. ZHL-2X+ Applications VHF/UHF cellular instrumentation laboratory

More information

Clarke & Severn Electronics Ph

Clarke & Severn Electronics Ph Clarke & Severn Electronics Ph +612 9482 1944 Email sales@clarke.com.au www.cseonline.com.au POWER AMPLIFIER FPA-22-0001 - 43-46GHz FPA-15-0001- 55-65GHz FPA-12-0001- 71-77GHz FPA-10-0003 - 75-110GHz FPA-10-0004

More information

MACH-ZEHNDER MODULATOR DRIVERS JSX Series

MACH-ZEHNDER MODULATOR DRIVERS JSX Series FEATURES Specifically designed for fiber optic applications Standard models for 10, 10.7 and 12.5 Gb/s data rates Product line includes linear and limiting amplifiers Gain control available Compatible

More information

Revision 1.0 Release Date October This document includes models 4360, 4462 Revision Notes - Initial Release, preliminary

Revision 1.0 Release Date October This document includes models 4360, 4462 Revision Notes - Initial Release, preliminary Part Number Revision 1.0 Release Date October 2006 This document includes models 4360, 4462 Revision Notes - Initial Release, preliminary Amplifier Name Technical Specifications Summary Frequency Range:

More information

SPA SMA DATA SHEET

SPA SMA DATA SHEET 43 db Gain Medium Power High Gain Amplifier at 3 Watt P1dB Operating From 14.4 GHz to 15.4 GHz with 41 dbm IP3 and SMA SPA-154-43-03-SMA is a 3 Watt Ku Band high gain power coaxial amplifier operating

More information

Linear High Power Amplifiers

Linear High Power Amplifiers PRODUCTS Linear High Power Amplifiers Aethercomm designs and manufactures high power class A and AB linear amplifiers to transmit voice, data and video for military systems, wireless customers and industrial

More information

RF-LAMBDA. ABSORPTIVE 2-4 GHz 6 Bits 64dB PIN DIODE ATTENUATOR. Absorptive Pin Diode Attenuator 6 Bits 64dB 2-4GHz RFDAT0204G6A.

RF-LAMBDA. ABSORPTIVE 2-4 GHz 6 Bits 64dB PIN DIODE ATTENUATOR. Absorptive Pin Diode Attenuator 6 Bits 64dB 2-4GHz RFDAT0204G6A. 7 65 6 55 5 5 35 3 25 2 5 5 Frequenc y (GHz) 2- Attenuation Value Insert. Loss 3.dB typ. 3.5dB max. ABSORPTIVE 2- GHz 6 Bits 6dB PIN DIODE ATTENUATOR VSWR Control bits Features Wide Band Operation 2.-.GHz

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS RF-LAMBDA LEADER OF RF BROADBAND SOLTIONS RPNAGGA W Front Over Drive Protected LNA ltra Wide Band Low Noise Amplifier ~ Electrical Specifications, TA = ⁰C, Vcc = V Features Gain: Typical Noise Figure:.

More information

Features. = +25 C, Vdc = +7V

Features. = +25 C, Vdc = +7V amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -7 dbc/hz @ khz Noise Figure: 6 db Gain:

More information

RFM XR. 2-30MHz 500W Class AB Linear High Performance Amplifier. Maximum Ratings Operation beyond these ratings will void warranty.

RFM XR. 2-30MHz 500W Class AB Linear High Performance Amplifier. Maximum Ratings Operation beyond these ratings will void warranty. Class AB 500W XR-rated linear amplifier 2-30MHz bandwidth 27dB typical gain 64% typical efficiency +/- 1.1dB typical gain flatness Temperature-compensated bias TTL disable The RFP2-30-500XR is an XR-rated

More information

1208 P10-VHF-H-20. Frequency Range: MHz. Efficiency: 10% Temperature Range: 0 to 70 C Max VSWR: 5:1. Class: Supply Voltage: 28.

1208 P10-VHF-H-20. Frequency Range: MHz. Efficiency: 10% Temperature Range: 0 to 70 C Max VSWR: 5:1. Class: Supply Voltage: 28. Part Number Revision 2.C Release Date July 24, 2007 Revision Notes Included Mechanical Drawings Amplifier Name Technical Specifications Summary Frequency Range: 170-230 MHz P1dB: 10 Watts CW Class: A Supply

More information

TOP VIEW 4 C BLOCK. Maxim Integrated Products 1

TOP VIEW 4 C BLOCK. Maxim Integrated Products 1 19-113; Rev 1; 8/3 EVLUTION KIT VILBLE DC-to-Microwave, +V Low-Noise mplifier General Description The is a low-noise amplifier for use from DC to microwave frequencies. Operating from a single +V supply,

More information

UA1L65VM Broadband Amplifier Module Data Sheet

UA1L65VM Broadband Amplifier Module Data Sheet UA1L65VM Broadband Amplifier Module Data Sheet Introduction The UA1L65VM Amplifier is a general-purpose broadband amplifier designed for microwave communications, test equipment, and military systems.

More information

High Power Amplifier ZHL-20W-13+ Coaxial. 50Ω 20W 20 to 1000 MHz

High Power Amplifier ZHL-20W-13+ Coaxial. 50Ω 20W 20 to 1000 MHz Coaxial High Power Amplifier 50Ω 20W 20 to 1000 MHz Features High power, 20 Watt Protected against overheat -shuts off automatically Excellent gain flatness, ±1.2 db typ. Class A amplifier Usable over

More information

Features. = +25 C, Vs = +5V, Vpd = +5V, Vbias=+5V

Features. = +25 C, Vs = +5V, Vpd = +5V, Vbias=+5V v4.1217 HMC49LP4E Typical Applications This amplifier is ideal for use as a power amplifier for 3.3-3.8 GHz applications: WiMAX 82.16 Fixed Wireless Access Wireless Local Loop Functional Diagram Features

More information

MX-041 Oven Controlled Crystal Oscillator

MX-041 Oven Controlled Crystal Oscillator MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Ultra Wide Band Low Noise Amplifier 0.01GHz~30GHz Electrical Specifications, TA = 25⁰C Features Gain: 36 Typical Noise Figure: 3.5 Typical P1 Output Power: 28m Typical Supply Voltage: AC110V~220V Typical

More information

AVP TO 2600 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER AVP2524 SPECIFICATIONS * INTERMODULATION PERFORMANCE ABSOLUTE MAXIMUM RATINGS AVP2524

AVP TO 2600 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER AVP2524 SPECIFICATIONS * INTERMODULATION PERFORMANCE ABSOLUTE MAXIMUM RATINGS AVP2524 Rev. 5/1 6 TO 26 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER Typical Values Broadband....................................... High Gain....................................... High Saturated Power, Psat.........................

More information

Broadcast Concepts Inc NW 102 Road Suite 4 Medley FL Tel: : Fax Model P50FM42MH-SMA2 FM Pallet Amplifier Module

Broadcast Concepts Inc NW 102 Road Suite 4 Medley FL Tel: : Fax Model P50FM42MH-SMA2 FM Pallet Amplifier Module Model P50FM42MH-SMA2 FM Pallet Amplifier Module This amplifier module is ideal for driver stages in FM Broadcast transmitters. 86 110MHz 28Volts Pout: 50W CW minimum 40dB Gain Class AB MACOM MRF173 Mosfet

More information

100W Power Amplifier 8GHz~11GHz

100W Power Amplifier 8GHz~11GHz 100W Power Amplifier 8GHz~11GHz High output power +50dBm Aerospace and military application X band radar High Peak to average handle capability All specifications can be modified upon request Parameter

More information

AWL /5 GHz a/b/g WLAN Power Amplifier Data Sheet - Rev 2.1

AWL /5 GHz a/b/g WLAN Power Amplifier Data Sheet - Rev 2.1 FEATURES 3.% EVM @ POUT = +19 dbm with IEEE 2.11a 6 QAM OFDM at 5 Mbps 3% EVM @ POUT = +2 dbm with IEEE 2.11g 6 QAM OFDM at 5 Mbps dbc 1st Sidelobe, 55 dbc 2nd sidelobe ACPR at +23 dbm with IEEE 2.11b

More information

Electrical Specifications. MAXIMUM POWER OUTPUT (dbm) (db) (dbm)

Electrical Specifications. MAXIMUM POWER OUTPUT (dbm) (db) (dbm) Coaxial Amplifier 50Ω Medium High Power 0.05 to 130 MHz Features medium high power, 29 dbm min. high IP3, +38 dbm typ. Applications HF/VHF instrumentation communication systems laboratory MODEL NO. FREQ.

More information

Performance Specifications

Performance Specifications OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20 AMT-A0119 0.8 GHz to 3 GHz Broadband High Power Amplifier W P1dB Data Sheet Features 0.8 GHz to 3GHz Frequency Range Class AB, High Linearity Gain db min 55 db Typical Gain Flatness < ± 1.2 db Typical

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20. DC Current A 1.6

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20. DC Current A 1.6 AMT-A0030 2 GHz to 18 GHz 8W 41 db Gain Broadband High Power Amplifier Module Data Sheet Features 2 GHz to 18 GHz Frequency Range Typical Psat power > +39 dbm Gain 41 db High Efficiency Internally Regulated

More information

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10

Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10 AMT-A0091 0.01 GHz to 6 GHz Broadband Low Noise Medium Power Amplifier Data Sheet Features 0.01 GHz to 6 GHz Frequency Range Typical Noise Figure < 1.2 db Typical Gain 45 db Gain Flatness < ± 1.2 db +20

More information

VFB400W - QXX - SXXX

VFB400W - QXX - SXXX date 01/30/2014 page 1 of 10 SERIES: VFB400W DESCRIPTION: DC-DC CONVERTER FETURES 400 W isolated output industry standard full brick package 4:1 input range (9~36, 18~75 ) single regulated outputs from

More information

FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:

FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications: FMAM432 1 MHz to 6 GHz, Medium Power Broadband Amplifier with 9 mw, 24 db Gain and SMA FMAM432 two stage amplifier operates across a wide frequency range from 1 MHz to 6 GHz The design utilizes GaAs PHEMT

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Wide Band Power Amplifier.~ Electrical Specifications, TA = ⁰C, Vcc = V Features Gain: Typical Noise Figure:. Typical Output P: m Typical Supply Voltage: V Ohm Matched Typical Applications Wireless Infrastructure

More information

Solid State Broadband High Power Amplifier

Solid State Broadband High Power Amplifier The BBS4A5AVT (2157) is suitable L & S Bands broadband or band specific high power applications. This amplifier utilizes high power GaN devices that provide wide frequency response, high gain, high peak

More information

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

Features. = +25 C, +Vdc = +6V, -Vdc = -5V HMC-C59 v.59 WIDEBAND LNA MODULE, - 2 GHz Typical Applications The HMC-C59 Wideband LNA is ideal for: Telecom Infrastructure Features Noise Figure:.8 db @ 8 GHz High Gain: 6 db @ 8 GHz PdB Output Power:

More information

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS

RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS Electrical Specifications, TA =, Vcc = V ltra Wide Band Low Noise Amplifier.~ Features Gain: Typical Noise Figure:. Typical Output power m typical High P: m Full Band Supply Voltage: V Parameter in. Typ.

More information