1 1. Before you begin, please read the following guide lines.
|
|
- Noel McDowell
- 5 years ago
- Views:
Transcription
1 1 1. Before you begin, please read the following guide lines. 2. Open the Two Boxes A. Unpack the two boxes carefully. B. Take out all accessories and check everything is included. 3. Setting up the Antenna. A. If you have not installed an Outback TV before, it is suggested you setup the system before doing the final install. B. Connect the ODU RF1(Out Door Unit) to the IDU RF1 (Indoor Unit) with 8m RG6 Antenna Cable. C. Connect the Power Cable Red and Black wires, Red + Positive, Black - Negative, to 12/24vDC D. Power up the antenna and then press DEPLOY. E. When the bracket is open at a slight angle backwards press PAUSE. F. Install the Dish using the Allen Key supplied. Making sure the longer bolts and spacers are used on the top two connections. G. Press RUN and the antenna will now search and lock on. The northern sky needs to be clear. Please make sure the base is either screwed down or supported to stop it tilting over. Bolts and Spacers Longer Bolts and Spacers on Top two connections RF1 RF1
2 2 1. Installation Once you are confident of the wiring and how the antenna works, it is now time to install 2. Location Carefully pick an area of the RV roof that is strong and will allow the Antenna to be mounted as flat and as level as possible. A plate may be needed to be used to strength the area. Please note the Direction of Travel, the antenna when stowed must face backwards. The ODU Antenna needs to face Backwards when stowed. Front of RV 3. Clearance of Antenna The area will need to be large enough to allow full 360 degree rotation and elevation range, when the antenna is Deployed in the upright position. Clear of all Hatches, Air Conditioners, etc 4. Mounting the Antenna (ODU) A. Drill the cable access holes and mounting holes to prepare the site for Installation. B. Please ensure all screw holes and fixings are sealed with a good quality sealant to prevent water leaks etc.
3 3 1. Power Connections A. Please connect to either a 12v or 24VDC power source. The IDU will automatically switch between these two voltages. B. A 5amp Fuse or Circuit Breaker is required on both the Red and Yellow Positive Cables. C. Red Cable - Connect this cable to the + Positive Side of the Battery D. Black Cable - Connect this cable to the - Negative Side of the Battery E. Yellow Cable - The Yellow cable is a safety feature, when connected to the Ignition Positive, the antenna will automatically STOW when vehicle is started. Connect this cable to the + Positive Side of the Ignition or Accessories. DO NOT connect to a permanent power source. When the yellow cable has power, the Antenna will automatically STOW, and will not DEPLOY. If the Yellow Cable is not connected the Antenna will operate normally, but will not automatically STOW when the vehicle is started. 5A Fuse Not Supplied 12v/24vDC Ignition (+) Auto Close 2. Mounting the IDU (Antenna Control Box) A. A dry secure location is required for the IDU. The IDU requires to be accessed to control the antenna. ie Deploy and Stow B. Please make sure there is enough room for the RG6 Antenna Cables to enter the rear of the IDU C. Drill the mounting holes and prepare the location for installation.
4 4 1. Cable Connections The RV85A Antenna comes standard with 1 x 8m RG6 and 1 x 1m RG6 Antenna Cables, suitable for a VAST FTA Receiver. An Optional IQ Kit, 2 x 8m RG6 Cables, is available for Pay TV Satellite Receivers. All Cables are required to be fitted with Compression F-Style Connectors, crimped or screw on connectors are not suitable. Outback TV RV85A Cable Connection Diagram IQ Style Sat Receiver RF1 RF2 RF3 RF4 Optional IQ Kit 2 x 8m RG6 Cable Spare RG6 Antenna Cable Supplied 8m RG6 Cable VAST Sat Receiver IDU Control Unit Supplied 1m RG6 Cable Power Cable Connection Loop to next VAST Receiver Optional RG6 Cable
5 5 1. Operation A. Turn on System Turn On Power The antenna system will retract to shut down position and enter into Sleep Mode. The power consumption is very low. Outback TV B. Deploy System Press DEPLOY will deploy system. Then antenna will lock onto target satellite automatically OPTUS C1 / D3 SLEEP 156.0E 0% MENU DEPLOY C. Stow System If you use ignition stow function (Yellow Wire connection), the system will automatically shut down and stow the dish on vehicle startup. OR press STOW. Antenna system will retract to shut down stowed position Before driving, please confirm the dish is completely retracted to the shut down stowed position. D. One Button to change Target Satellite Press the Function key, to change the target satellite. Standard settings are OPTUS C1/D3, OPTUS D2, INTELLSAT 19 Wait for 3 seconds, the target satellite will be selected automatically and tracked by the antenna. OPTUS C1/D3 LOCK 156.0E 80% MENU STOW SATELLITE SELECTION A: OPTUS C1 / D3 A: OPTUS C1/D3 B: OPTUS D2 C: INTELSAT 19 Antenna will return automatically to Normal Mode when tracking. E. Turn Off System Press Power can turn off the system
6 OCEAN TV OUTBACK TV Outback TV RV85A and RV60A 100% Australian Owned MR Marine Group Australia s Specialist in Marine and RV Satellite TV Antennas WEBSITES RV Antennas Marine Antennas info@mrmarine.com.au Ocean TV O45HD and O60HD PHONE
SATFI RV INSTALLATION MANUAL
SATFI RV INSTALLATION MANUAL TABLE OF CONTENTS GENERAL... 1 IMPORTANT SAFETY INSTRUCTIONS... 1 BEFORE STARTING THE INSTALLATION... 1 TOOL LIST... 2 MECHANICAL INSTALLATION... 2 ELECTRICAL INSTALLATION...
More informationAdjustable Roof Racks Installation Guide v1.2
Adjustable Roof Racks Installation Guide v1.2 Thank you for purchasing Coast to Coast s Adjustable Roof Rack. In this document you will find a list of all components and a detailed guide on how to correctly
More informationHughes 9300 Series Mobile Satellite Terminal
Hughes 9300 Series Mobile Satellite Terminal Installation Guide 1038494-0001 Revision E Copyright 2011 Hughes Network Systems, LLC All rights reserved. This publication and its contents are proprietary
More informationHughes 9450 Mobile Satellite Terminal
Hughes 9450 Mobile Satellite Terminal Installation Guide 3004129-0001 Revision C Copyright 2011 Hughes Network Systems, LLC All rights reserved. This publication and its contents are proprietary to Hughes
More informationMedium HoneyBadger Chase Rack Installation Instructions
PREPARATION Medium HoneyBadger Chase Rack Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We recommend reading
More informationHughes 9450 Mobile Satellite Terminal Series. Installation Guide
Hughes 9450 Mobile Satellite Terminal Series Installation Guide Document No. 3004129-0001 Revision E 17 November 2017 Copyright 2013, 2017 Hughes Network Systems, LLC All rights reserved. This publication
More informationHughes 9450 Mobile Satellite Terminal
Hughes 9450 Mobile Satellite Terminal Installation Guide 3004129-0001 Revision C Copyright 2012 Hughes Network Systems, LLC All rights reserved. This publication and its contents are proprietary to Hughes
More informationKOP4800 Installation Guide
KOP4800 Installation Guide This guide contains installation and safety information for your KING One Pro. Please read thru this guide before using or installing your KING One Pro. QUESTIONS? (952) 345-8147
More informationHughes 9450 Mobile Satellite Terminal. Installation Guide
Hughes 9450 Mobile Satellite Terminal Installation Guide 3004129 Revision A September 15, 2010 Copyright 2010 Hughes Network Systems, LLC All rights reserved. This publication and its contents are proprietary
More informationBe sure any accessory used will fit with the soft upper doors before installing. Not all accessories will be compatible.
Company Name: Spike Power Sports Vehicle Name: Polaris General 2P Product Description: Soft Upper Doors Part Number: 58-1600 Revision: R01 09/19/2018 Contents: 655 Elm Ridge Ave, Canal Fulton OH, 44614
More informationModel CC-25HV Antenna Retrofit Kit
Model CC-5HV Retrofit Kit Coast to Coast RV Services 0 George Young Street, Auburn NSW Postal Address: PO Box 5, Regents Park NSW Phone: 0 965 7600 Fax: 0 965 7688 Email Technical: technical@coastrv.com.au
More informationModel CC-25HV Antenna Retrofit Kit
Model CC-5HV Antenna Retrofit Kit Coast to Coast RV Services 0 George Young Street, Auburn NSW 1 Postal Address: PO Box 15, Regents Park NSW 1 Phone: 0 965 7600 Fax: 0 965 7688 Email Technical: technical@coastrv.com.au
More informationSTART HERE BEFORE YOU BEGIN FIG 1 STEP 2
PROFESSIONAL INSTALL RECOMMENDED REAR MODULAR / MULTI LED ROOF MOUNTS PART#: Z350040 / Z350050 REAR ROOF LED LIGHT MOUNTS Parts included (1) - Driver Side Roof Mount Upright (1) - Passenger Side Roof Mount
More informationInstallation Manual for the Rockmeister Roof Ladder
Installation Manual for the Rockmeister Roof Ladder Exclusively for Mercedes-Benz Geländewagen W460, W461 & W463 with single rear door NOTE: W460 & W461 models have a different Frame Bracket than the W463.
More informationWINEGARD. Movin View
WINEGARD TM Movin View Digital Satellite Mobile Antenna for Single Receiver Model MV-0055 Made in the U.S.A. U.S. Patent Nos. 6,023,247; 6,188,300 Winegard Company 3000 Kirkwood St. Burlington, IA 52601-2000
More informationFind the optimum placement to receive the best reception.
Find the optimum placement to receive the best reception. At SIRIUS, our customers satisfaction with the performance of their radios is extremely important to us. In this section, we have prepared a series
More informationPhone: +(44) Dawson GO! Fully Automatic TooWay Broadband Antenna
Phone: E-mail: Sales@dawson-dynamic.com GO! Fully Automatic TooWay Broadband Antenna GO! Product Information Who is it right for? Anyone that needs mobile internet access, say on a motorhome, a mobile
More informationBunk Pod Front Entry Assembly Instructions
Bunk Pod Front Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod This step by step guide will show how to assemble your pod(s) on site. It
More information55000/55010 Installation Instructions
A. Install 55015 B. Bolt roof rails, 55020/55025, to front hoop. C. Assemble 55026 D. To install without drilling into bumper. E. If mounting directly to bumper. A. 55015 Installation Instructions 55000/55010
More informationCSA-450 Multi Fully automatic, auto-tracking marine Satellite antenna with 3 outputs
CSA-450 Multi Fully automatic, auto-tracking marine Satellite antenna with 3 outputs Instruction Manual Ver. 1.2 Thank you for purchasing our product. Please read this instruction manual carefully before
More informationGPS Dome Installation Manual
GPS Dome 1.01 Installation Manual Contents Introduction... 3 Overview... 3 Cautions... 4 Installation... 4 Installation Kit... 4 GPS Rece iver System with GPS Dome... 5 SMA Cables Connectors... 5 Installation
More informationBellman BRUGERVEJLEDNING. Fyrtårn Flash BE1441
Bellman EN BRUGERVEJLEDNING Fyrtårn Flash BE1441 Introduction The Visit system consists of a number of radio transmitters and receivers. The transmitters detect different events in the surrounding area
More information8mm x 25mm "Z" Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Side Frame Mounting Bracket 8 12mm Hex Nuts 1 Passenger/Right Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Driver/Left
More informationMESA-HPX. Assembly and Installation Manual. w/appendix A for Prodelin Antenna. 901-Manual-MESA-HPX
MESA-HPX Assembly and Installation Manual w/appendix A for Prodelin Antenna 901-Manual-MESA-HPX Rev 30 March 2011 2 INDEX Installation Cautions 4 Installation Pole Height Orientation of the Mount on the
More informationSENC 150. Cross Feed Installation... Mounting Information... Center reading head... First Steps...
Cross Feed Y Axis on Right Hand Side Cross Feed Installation... * Supplied with encoder hardware M4 x 8mm SHSS Mounting block 1/4-20 x 1/2 SHSS (2) per block *1/4-20 x 1 BHCS (2) or 1/4-20 x 1-1/4 BHCS
More informationSENC 150. Longitudinal Installation... Mounting Information... Center reading head... First Steps...
Encoder Installation Manual For: Bridgeport Series I Vertical Knee Mill and other similar mills Longitudinal X Axis front table mount Longitudinal Installation... *Supplied with encoder hardware **Supplied
More informationINSTALLATION INSTRUCTIONS
TEL -866-XANATOS INSTALLATION INSTRUCTIONS PART#: 7D5000SS\7D500A GRILL GUARD FOR DODGE SPRINTER 07-09 PARTS LIST: 8 6 Grille Guard Driver/Left Frame Mounting Passenger/Right Frame Mounting Driver/Left
More informationKWIK-KIT KK-S INSTALLATION INSTRUCTION PACKAGE
KWIK-KIT KK-S-120-02 INSTALLATION INSTRUCTION PACKAGE INSTALLATION INSTRUCTIONS HAVIS KWIK-KIT KK-S-120-02 2002-2007 DODGE/FREIGHTLINER SPRINTER VAN PLEASE READ COMPLETE INSTRUCTIONS PRIOR TO INSTALLATION
More informationSENC 150. Longitudinal Installation... Mounting Information... Center reading head... First Steps...
Installation Manual For: Vertical Knee Mill Longitudinal X Axis on Rear of Longitudinal Installation... * Supplied with encoder hardware **Supplied with center support hardware 5/16-18 x 3/4 SHCS Stop
More informationSENC 150. Longitudinal Installation... Mounting Information... Center reading head... First Steps...
JET 3PGH-RX Lathe Longitudinal Z & X Cross Feed Axis Longitudinal Installation... * Supplied with spar hardware ** Supplied with hardware 1/4-20 x 1/2 SHSS (2 per block) 10-24 x 5/8 BHCS (2) mounting plate
More informationMotorized Screen with Masking Installation Manual
Motorized Screen with Masking Installation Manual Mounting Dimensions - Small Casing Ceiling Mount - Single Layer - 70-96 (16/9 format) - 70-90 (4/3 format) - 70-100 (2.35 format) PROJECTION SIDE 2.9"
More informationParts. Backplate. Battery Cover. Backup Key. Touchscreen Assembly. Inside Assembly. Thumbturn. Strike. Reinforcement Plate. Bolt.
Quick Start Guide Backplate Backup Key Battery Cover Touchscreen Assembly Parts Strike Bolt Inside Assembly Thumbturn Reinforcement Plate Set Screw Reinforcement Screws Inside Assembly Screw Backplate
More informationJoiner Kit For Models N388, C450, E402B, E411T, E415H, E440T, E442B, E521T and E522B
Joiner Kit For Models N388, C450, E402B, E411T, E415H, E440T, E442B, E521T and E522B KIT COMPONENTS Part Illustration Description Rear Bracket Front Lower Bracket Front Upper Bracket KIT APPLICATION This
More informationADDICTIVE DESERT DESIGNS
Preparation: Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake. We recommend reading through the installation instructions in whole before performing
More informationTOYOTA TACOMA ROOF RACK Preparation. Part Number: PT
Preparation Part Number: PT278-35140 Kit Contents Item # Quantity Reqd. Description 1 1 LH Base Rail Assembly w/ Crossbar 2 1 RH Base Rail Assembly 3 1 Hardware Bag 4 2 Brackets 5 1 Front Crossbar Assembly
More information2015 Current Ford F150/Raptor Adaptive Cruise Control Module Relocation Bracket Installation Instructions
2015 Current Ford F150/Raptor Adaptive Cruise Control Module Relocation Bracket Installation Instructions PREPARATION 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationSENC 150. Longitudinal Installation... Mounting Information... Center reading head... First Steps...
Clausing 1545 lathe: Longitudinal Z & X Cross Feed Axis Longitudinal Installation... * Supplied with spar hardware ** Supplied with hardware 1/4-20 x 1/2 SHSS (2 per block) 10-24 x 5/8 BHCS (2) mounting
More informationInstallation and Operating Instructions
INSTRUCTIONS Installation and Operating Instructions In these installation instructions is described the replacement of the elevating support with gas springs. This conversion kit applies to all California
More informationADDICTIVE DESERT DESIGNS
Preparation: Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake. We recommend reading through the installation instructions in whole before performing
More informationHIDEAWAY SERIES POCKET DOOR SYSTEM ASSEMBLY INSTRUCTIONS
HIDEAWAY SERIES POCKET DOOR SYSTEM ASSEMBLY INSTRUCTIONS Part No. PRODUCT RANGE (UK IMPERIAL SIZES) MADE FOR 50mm X 100mm STUD WALLS Item Code Available Sets Maximum Door Width Maximum Door Height Coburn
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationInstruction Manual. Quick Setup
Instruction Manual Quick Setup Make sure the Carryout G2 antenna is in a location with a clear view of the southern sky. Connect the provided coaxial cable from the primary receiver to the MAIN port on
More informationWhalen Furniture Mfg. Factory No. 5 Page # 1
If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have your instructions and parts list
More informationRotary Fixture M/V/X CLASS LASER SYSTEMS. Installation and Operation Instructions
Rotary Fixture M/V/X CLASS LASER SYSTEMS Installation and Operation Instructions 02/01/2000 Introduction The Rotary Fixture controls in the Printer Driver are used along with the optional Rotary Fixture
More informationINSTALLATION STEPS MAXIMUS-3.COM
JK WRANGLER MAXIMUS-3 JK ROOF RACK/PLATFORM MAXIMUS-3 RHINO RACK ROOF PLATFORM/RACK IS NOT COMPATIBLE WITH JK 2-DOORS. THIS PRODUCT IS NOT DESIGNED TO WORK WITH JK SOFT TOP ROOF. INSTALLATION GUIDES Please
More informationGPS INSTALLATION & USER GUIDE. Compatible with Nomad 3, Nomad SD, SD2 MESA. Satellite TV // MESA
Satellite TV GPS Compatible with Nomad 3, Nomad SD, SD2 MESA INSTALLATION & USER GUIDE // MESA ALL RIGHTS RESERVED Rev 9 Oct 2009 901-GPS Install Guide Manual INDEX BILL OF MATERIALS Components for configuration
More informationSENC 150. Longitudinal Installation... Mounting Information... Center reading head... First Steps...
Longitudinal Z & X Cross Feed Axis Longitudinal Installation... * Supplied with encoder hardware Mounting pads Mounting hole B 1/4-20 x 7/8 SHCS (2) 8-32 x 3/16 SHSS (4) M4 x 8mm SHSS (5) Reading head
More informationI Click on a link tab to jump to that page. Cover Page
Publication, Duplication, or Retransmission Of This Document Not Expressly Authorized n Writing By The nstall Doctor s Prohibited. Protected By U.S. Copyright Laws. 1997,1998,1999,2000. Factory Radio Other
More informationTOYOTA TACOMA BED EXTENDER Preparation. Part Number: PT General Applicability All 2012 and newer Tacoma models
Preparation Part Number: PT392-35120 Kit Contents 1 1 Curved Tube Assembly - Right 2 1 Curved Tube Assembly - Left 3 3 Center Tube 4 1 Hardware Bag 5 1 Installation Instructions 6 1 Care Card Hardware
More informationHatchback Wing Riser Kit
Hatchback Wing Riser Kit 2015-06-11 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced with installation of aftermarket
More informationRangerWare Fiberglass Door System Installation Instructions P/N
Page 1 of 9 RangerWare Fiberglass Door System Installation Instructions P/N 2878016 ORDER OF INSTALLATION Note: To assure proper order, read all Accessory Installation Instructions before beginning. 1.
More information2 ADULTS REQUIRED FOR ASSEMBLING
2 ADULTS REQUIRED FOR ASSEMBLING If you have any questions regarding assembly or if you are missing parts, do not return this item to Retailer Store Please call our customer service number and have your
More informationGRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST:
PARTS LIST: 1 Grille Guard 8 12mm Hex Nuts 1 Driver/Left Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Passenger/Right Side Frame Mounting Bracket 4 10mm x 20mm OD x 2mm Flat Washers
More informationENC 125 T/E. Quill Installation... Mounting Information... Center reading head... First Steps...
Quill Installation... * Supplied with encoder hardware M6 flat washer.017 thk. (2) 1/4 Flat washer.09 thk. (2) 1/4-20 x 1/2 BHCS (2) M4 x 8mm SHSS (2) (special length) 4 Encoder 8-32 x 1/4 SHSS (4) 1/4
More informationTOYOTA TACOMA BED EXTENDER Preparation. Part Number: PT
Preparation Part Number: PT392-35120 Kit Contents 1 1 Curved Tube Assembly - Right 2 1 Curved Tube Assembly - Left 3 3 Center Tube 4 1 Hardware Bag 5 1 Installation Instructions 6 1 Care Card Hardware
More informationThe PRC-2090 base docking station incorporates the PRC-2090 vehicle docking station plus an AC Power supply module P/N
Base Docking Station Introduction The PRC-2090 base docking station incorporates the PRC-2090 vehicle docking station plus an AC Power supply module P/N 2090-06-01. A MIL-STD high speed HF Modem (P/N 2090-04-10)
More informationSmall Above Fireplace Pull-Down Full-Motion TV Wall Mount
Small Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 33123 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
More informationLCD/Plasma Mount Manual
LCD/Plasma Mount Manual Product Overview: Thank you for your Cheetah Mount purchase. All Cheetah Mounts are designed to provide excellent function, high quality, easy installation and stylish appearance.
More informationLOCKN LOAD FIRST TIME INSTALLATION
LOCKN LOAD TM TRACK MOUNTING KIT NISSAN NAVARA D40 2004-2015 2 BAR TRACK HEAVY DUTY ROOF RACK SYSTEM MAX VEHICLE ROOF LOAD RATING: 100KG TOTAL LOAD EQUALS WEIGHT OF ROOF RACKS + ACCESSORIES + CARGO FIRST
More informationINSTALLATION MANUAL WEEKENDER STEEL LADDER RACK
TRUCK STORAGE SOLUTIONS SECURING YOUR REPUTATION INSTALLATION MANUAL WEEKENDER STEEL LADDER RACK STEEL & ALUMINUM SIDE BOX WITH PACK RAT DRAWER UNITS MODELS ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS
More informationPRO - III & IV K M K N H A D J M J 1/2", 9/16", & 3/4" 2004 KargoMaster-'Pro 3' _2.1. com
PRO - III & IV B L G M D E M 4 2 F 1 F L H D C 3 H A 8 M 7 1/2", 9/16", & 3/4" drawitforyou com 2004 argomaster-'pro 3' _2.1 A (4 ea.) 1/2" x 3 1/2" Hex Bolt B (2 ea.) 1/2" x 2 1/4" Button Head Bolt C
More informationConflicts Note: Drop-in Bed liner
Toyota Tundra 2015 LED Bed Lights Preparation Part Number: 00016-34089 Accessory Code: BU1000 Conflicts Note: Drop-in Bed liner Kit Contents Item # Quantity Reqd. Description 1 1 Hardware Kit 2 1 Driver
More informationInstallation Instructions
Articulating Dual Monitor Mount Stand Installation Instructions UNPACKING Carefully open the carton, remove contents, and place them on a protected surface to avoid damage. Check the parts and the Supplied
More informationVQ4200 Owner s Manual
TM VQ4200 Owner s Manual This manual contains detailed information on your KING Quest. To start watching TV right away, use the Quick Reference Guide. For Bell TV (Canada) and DISH (USA) IMPORTANT! This
More informationXHD Bull Bar w/ Dual Row LED Light Bar (10-17 Jeep JK)
XHD Bull Bar w/ Dual Row LED Light Bar (10-17 Jeep JK) PARTS LIST: 1 Driver/Left Side Bull Bar Upright 8 10-1.5mm Hex Nuts 1 Side Bull Bar Upright 4 10-1.5mm Nylon Lock Nuts 1 Top Cross Bar 2 Light Bar
More informationAutomatic Roof-Mounted Satellite TV Antenna
Automatic Roof-Mounted Satellite TV Antenna www.winegard.com/mobile For Technical Services, email help@winegard.com or call 1-800-788-4417 For Receivers and Programming, call 1-866-609-9374 DO NOT RETURN
More informationInstalling Your Electronic Deadbolt
Ultra Security Plus Electronic Deadbolt Installation Instructions http://www.hberger.com/video-gallery/electronic-deadbolt New Installation Lock Location Preparation (Skip this section if you door has
More informationCopyright 2013 Hughes Network Systems, LLC
Copyright 2013 Hughes Network Systems, LLC All rights reserved. This publication and its contents are proprietary to Hughes Network Systems, LLC. No part of this publication may be reproduced in any form
More informationVHF 100/200 Series Radio Installation Instructions
These installation instructions are for the following VHF radios and handsets: North American Models VHF 100 VHF 200 GHS 10 International Models VHF 100i VHF 200i GHS 10i Compare the contents of this package
More informationC70 Window Roller Repair Taken from: Heres the problem:
C70 Window Roller Repair Taken from: http://www.volvospeed.com/vs_forum/topic/115086-how-to-c70-window-rollers-permanent-fix/ Heres the problem: This happened to two separate window assemblys on my c70
More informationADULT ASSEMBLY REQUIRED
ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if you are missing parts, do not return this item to the Retailer Store Please call our customer service number and have your instructions
More informationINSTALLATION GUIDE Rear Bumper. Jeep JL Wrangler
INSTALLATION GUIDE Rear Bumper Jeep JL Wrangler Dual Swing System 1A From the stock bumper you removed from vehicle, you ll need to take the parking sensor wiring from it and feed it into the new bumper.
More informationSENC 150 Encoder Installation. SENC 150 Encoder Installation. Vertical Knee Mill X axis... First Steps: Mounting Information: Before proceeding:
Vertical Knee Mill X axis... Mounting hardware is described within the contents of these instructions. Hard Stop ACU-RITE linear encoder *Center support for encoder Fasteners, and hardware that is provided
More informationPlease read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment.
Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who
More informationSELFSAT-H10D. What is SELFSAT-H10D? Warning!!! Safety Instructions
SELFSAT-H0D What is SELFSAT-H0D? SELFSAT-H0D is a Horn Array Type Satellite Antenna with Dual Linear Polarization, it can receive signal from major Satellites and would replace a normal former Parabolic
More information# Made In USA. Simple GPS Tracker Parts List. Needed Tools and Materials
Needed Tools and Materials #09245 Made In USA Compatible Ebay (to mount electronics to) Drill and Screwdriver (for mounting Transmitter to ebay) Compatible Battery (for powering Airborne Transmitter) Optional
More informationInstruction Guide 4A90L
Instruction Guide 4A90L Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com DATE: *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS
More informationTOYOTA TUNDRA CARGO DIVIDER Preparation. Part Number: PT
Preparation Part Number: PT767-34070 Kit Contents 1 1 Divider Screen 2 1 LH Bracket with Warning Label 3 1 RH Bracket without Warning Label NOTE: Part number of this accessory may not be the same as the
More informationCPAT AFDD Operation Manual
CPAT AFDD Operation Manual v 2.0 / 2008.08.12 Contents 1. FCC and IC Compliance Statements 3 2. System Components 4 3. AFDD Unit Physical Installation 5 4. Antennas Installation 6 5. Electrical Installation
More informationM2 Antenna Systems, Inc. Model No:
M2 Antenna Systems, Inc. Model No: 400-600-10 SPECIFICATIONS: Model... 400-600-10 Frequency Range... 390 To 650 MHz *Gain... 12 To 13 dbic Front to back... 20 db Nominal Beamwidth... 46 Nominal Feed Impedance....
More informationBRU-100 Physical Installation
APPENDIX B BRU-100 In This Appendix: Warnings and Cautions, page 50, page 51 Check List, page 57 This appendix provides guidance for the physical installation of the BRU-100 Remote Unit at a subscriber
More informationFIRST EDITION : FEB J : JUN. 6,2001. PUB. No. OME MODEL1731 MARK-3 ( HIMA) A ll rights reserved. Your Local Agent/Dealer
C Your Local Agent/Dealer 9-52, Ashihara-cho, Nishinomiya, Japan Telephone: 0798-65-2111 Telefax: 0798-65-4200 A ll rights reserved. Printed in Japan FIRST EDITION : FEB. 1997 J : JUN. 6,2001 ( HIMA) PUB.
More informationINSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1
INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1 IMPORTANT! : The MSP-S11 Mount is designed for use with Sharp 45" LCD displays that have a 200mm x 200mm mounting pattern. IMPORTANT! : The mount
More informationQDV120 Operation and Pointing manual
QDV120 Operation and Pointing manual MPAD1 Plus OP-080316-E1 page 1 Contents Item Description Page 1.0 Health and Safety for Operators and Installation Staff 3 2.0 Transit case Reflector/Mount/BUC/LNB
More informationQS80 FLAT DISH USER MANUAL. v0417-pre1
QS80 FLAT DISH USER MANUAL www.quicksatuk.com v0417-pre1 About QuickSAT Congratulations on your new purchase and welcome to the world of QuickSAT Satellite TV, QuickSAT is the simplest touring satellite
More informationPlease read these instructions before use and keep for future reference
Wardrobe Assembly Guide Allen Key Provided (if required) Philips Screwdriver Required Hammer Required Please read these instructions before use and keep for future reference Caution! Two Person Assembly
More informationYagi and Omni Antennas Installation Manual
Yagi and Omni Antennas Installation Manual 25500445 Rev. A0 0218 Printed in U.S.A. Copyright 2018 Federal Signal Corporation Limited Warranty This product is subject to and covered by a limited warranty,
More information28" Adjustable Solar Tilt Mount ADJ-28. Owner's Manual. Please read this manual BEFORE installing your solar tilt mount
28" Adjustable Solar Tilt Mount ADJ-28 Owner's Manual Please read this manual BEFORE installing your solar tilt mount SECTION 1 Introduction Mounting your solar panel inclined to an optimized angle with
More informationRegister your product and get support at. SDV8622/12. User manual
Register your product and get support at www.philips.com/welcome SDV8622/12 User manual Contents 1 Important 4 Safety 4 For indoor use 4 For outdoor use 4 Recycling 4 English 2 Your SDV8622/12 5 What
More informationParadigm. Connect100 Installation Guide
Paradigm GX Connect100 Installation Guide Paradigm GX Safe Use WARNING Radiation Hazard. Transmitter power levels are sufficient to cause blindness or other serious injury to body tissue. Do not power
More informationKeypad Lock Retrofit Kit for Follett REF Undercounter Refrigerator P/N
Materials supplied Reference # Keypad assembly (housing and mounting base) 1 Keypad housing base 2 Lock mechanism with cable 3 (9) 8-32 x 1/2" stainless steel screws 4 Latch 5 Jig 2, latch 6 Jig 1, keypad
More informationw w w. h d o n l i n e s h o p. d e VRSCF RIGID SADDLEBAGS GENERAL PREPARATION -J04704 REV Kit Number Models Tools and Supplies Required
-J070 REV. 00-0- VRSCF RIGID SADDLEBAGS GENERAL Kit Number 7-0 Models For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English
More informationProblem/Procedure Description. Requirements. Problem/Procedure Solution. How-To Document. Updated on: 11/13/2008 By:Christopher Ware
Problem/Procedure Description Performing maintenance on 95s, 95sII and H100 Requirements Ball Bearing Grease (LPKF P/N 106976) Tri-Flow Teflon lubricant aerosol. 3-in-1 Multi-purpose Oil Electronic Component
More informationConflicts Note: None. TOYOTA Highlander 2016 LED Illumination Package (Interior and Exterior) Part Number: Accessory Code: LL1000
TOYOTA Highlander 2016 LED Illumination Package (Interior and Exterior) Part Number: 00016-00069 Accessory Code: LL1000 Conflicts Note: None Color Applicability/Trim Level Kit Contents Item # Quantity
More informationGrand Slam 380 and Grand Slam 380XL Installation Instructions
Grand Slam 380 and Grand Slam 380XL Installation Instructions Patent #7,114,283 GS-380 GS-380XL Taco Metals, Inc., info@tacomarine.com TacoMarine.com Thank you for purchasing a quality Taco Marine product.
More informationINSTRUCTION MANUAL HF AUTOMATIC TUNING ANTENNA AH-740. * The stand in the photo is not supplied with the tuning antenna.
INSTRUCTION MANUAL HF AUTOMATIC TUNING ANTENNA AH-740 * The stand in the photo is not supplied with the tuning antenna. FOREWORD Thank you for purchasing the AH-740 hf au to m at i c tuning antenna. The
More informationPet Door Panel Installation Manual
Pet Door Panel Installation Manual 400-558-1 1 4/3/03, 3:26 PM Components: Pet Door Panel Panel Latch Assembly Foam Weather-stripping Glass Sweep (4) Binding Posts (6) #6 x 1/2 Sheet Metal Screws (4) 8-32
More informationAudi Q7 Running board Fitting Instructions
Audi Q7 Running board Fitting Instructions Parts list Item Designation 1 2 3 4 5 6 7 Running board Support bracket Covers Screw M8x40 Screw M8x20 Blind rivet Screw for plating 4.8x16 Quantity 2 6 4 14
More informationINSTALLATION AND OPERATION MANUAL. Multiple-Radio Interface Module 41021G P-26 (11-12) 2012 David Clark Company Incorporated
INSTALLATI AND OPERATI MANUAL Multiple-Radio Interface Module 41021G-01 19537P-26 (11-12) 2012 David Clark Company Incorporated Table of Contents Cautions and Warnings... 1 Parts/Tools List... 2 Supplied
More information