DMX DALI 1/10V (via optional controllers / interfaces) Cable ES03VV5-F 5x0,35mm 2 (Long mm) 58,5 x 35,5 x Cut to size (Máx.

Transcription

1 GROOVE POWERLED MID Linear system of small dimensions, suitable for technical, grazing and/or architectural lighting, made of an aluminium anodized profile in matte silver finish and a clear diffuser. This diffuser features an additional film, which provides a clean and optimal light beam projection. The system can be surface or recessed mounted and, considering its trimless profile, it provides a minimalist finish, where the light effect and not the fixture itself is the main star. Includes high power LEDs, available in 3 different densities and with different optics to choose, as well as different color temperatures (RGB and CWA included). Additionally, it features built-in control and power electronics, providing the light fixture a higher robustness and protection against external events (reversal polarity, overvoltage peaks, possible current variations), as well as easing the LEDs dimming and management through any automation or external control system. The fixture is IP67 and IK7 rated, so totally suitable to be installed outdoors. TECHNICAL SPECIFICATIONS OF LUMINARY POWER SUPPLY 24V DC POWER FACTOR - CONSUMPTION 18 W/m CLASS Class 3 BEAM ANGLE 9º 30º 45º EL (48º x 9º) L.O.R. 64% PERFORMANCE DATA INTEGRATED REGULATION AVAILABLE REGULATION CONNECTION THERMAL MANAGEMENT MATERIALS GENERAL DIMENSIONS WEIGHT INSTALLATION OPERATING TEMPERATURE COLOR TEMP. (ºK) CRI* FLUX** EFFICIENCY 827 (2.700 ºK CRI min. 80) 816 lm/m (45,33 lm/w) 830 (3.000 ºK CRI min. 80) 912 lm/m (50,66 lm/w) 840 (4.000 ºK CRI min. 80) 989 lm/m (54,93 lm/w) 850 (5.000 ºK CRI min. 80) 1018 lm/m (56,53 lm/w) PWM DMX DALI 1/10V (via optional controllers / interfaces) Type A : Type B : Passive Housing: Diffuser : Cable ES03VV5-F 3x0,35mm 2 (Long mm) Cable ES03VV5-F 5x0,35mm 2 (Long mm) Anodized aluminium Single-pane clear tempered safety glass with underside diffusing coat (G) / Opal polycarbonate (P) 58,5 x 35,5 x Cut to size (Máx mm) G(Glass): P(Polycarbonate): Recessed / Surface -10 ºC / 50 ºC 1,600 kg/m. aprox. 1,350 Kg/m. aprox. 1 de 8

2 PROTECTION LIFE TIME *** IP h TECHNICAL SPECIFICATIONS OF LAMP LIGHT SOURCE Nº LEDs x ma ( Vf min.) PERFORMANCE DATA POWERLED 15 x 350mA Constan current (22V) COLOR TEMP. (ºK) - CRI* FLUX** EFFICIENCY 827 (2.700 ºK CRI min. 80) 1275 lm/m (70,83 lm/w) 830 (3.000 ºK CRI min. 80) 1425 lm/m (79,16 lm/w) 840 (4.000 ºK CRI min. 80) 1545 lm/m (85,83 lm/w) 850 (5.000 ºK CRI min. 80) 1590 lm/m (88,33 lm/w) * The temperature of colour and the wave length are approximated and can vary depending on the BIN of the LED. ** The luminous flux values are not indicated Typ. (25ºC). Correspond to values in temperature (85ºC). The light output may be subject to change by the constant evolution of LED technology and / or production circumstances. *** Based on B10/L70 levels (test conducted in white LEDs). ENERGY EFFICIENCY INDEX (IEE) 2 de 8

3 PART NUMBER SAG-GRQ C -O -D -24 REF. PRODUCTO LENGTH CRI COLOR OPTIC DIFFUSER VOLTAGE º G 30 30º P 40 45º 50 EL SAG-GRQ C -O -D -24 REF. PRODUCTO LENGTH COLOR OPTIC DIFUSOR ALIMENTACIÓN R 9º G G 30º P B 45º A EL RGB GENERAL DIMENSIONS ACCESSORIES REFERENCE DESCRIPTION DRAWING SAG-SSF-000 Surface fixing bracket. It incorporates a headless threaded screw for an easy installation. SAG-SSF-055 Driver converter, from 24VDC to 350mA. When ordered, it is supplied already connected to the fixture. 3 de 8

4 SAG-SSF-100 Surface fixing bracket. For an installation to 100mm of the wall. It incorporates a headless threaded screw for an easy installation. SAG-SSR-300 Surface fixing system with a rotating joint. The 300mm support arm can be cut to size. CET-100 Standard recessed box. CET-040 Low profile recessed box. CET-TP1 End cap, for SAG-CET-100. To install at the end of each linear system. INSTALLATION LUMINARIA CON SSF-000 / FIXTURE WITH SSF-000 Recomendado 2 uds. por metro. Mínimo 2 uds. por luminaria. Recommended 2 units per meter. Minimum 2 units per luminary. 4 de 8

5 LUMINARIA CON SSF-055 / FIXTURE WITH SSF-055 Recomendado 2 uds. por metro. Mínimo 2 uds. por luminaria. Recommended 2 units per meter. Minimum 2 units per luminary. LUMINARIA CON SSF-100 / FIXTURE WITH SSF-100 Recomendado 2 uds. por metro. Mínimo 2 uds. por luminaria. Recommended 2 units per meter. Minimum 2 units per luminary. LUMINARIA CON SSF-300 / FIXTURE WITH SSF-300 Recomendado 2 uds. por metro. Mínimo 2 uds. por luminaria. Recommended 2 units per meter. Minimum 2 units per luminary. 5 de 8

6 LUMINARIA CON CET-100 / FIXTURE WITH CET-100 Dimensiones del alojamiento: Dimension hole: Ancho / Width : Largo / Leng th: Profundidad / Depth: Min. 80 mm Min. Longitud CET mm Min. CET-100 length + 10mm Min. 90 mm + Capa de grava* - Grosor pavimento final Min. 90 mm + Gravel layer* - Floor finish thickness *Solo en instalaciones de exterior. Recomendado m in. 50mm *Only for outdoor installation. Recomm ended m in. 50mm Conexion requerida Required connection IP67 Detalle silicona Silicone detail de 8

7 LUMINARIA CON CET-040 / FIXTURE WITH CET-040 Dimensiones del alojamiento: Dimension hole: Ancho / Width : Largo / Leng th: Profundidad / Depth: Min. 50 mm Min. Longitud CET mm Min. CET-100 length + 2mm Min. 40 mm + Capa de grava* - Grosor pavimento final Min. 40 mm + Gravel layer* - Floor finish thickness *Solo en instalaciones de exterior. Recomendado min. 50mm *Only for outdoor installation. Recommended min. 50mm Conexion requerida Required connection IP67 Detalle silicona Silicone detail CONNECTION Type A: Monocolor 24V DC COLOR DESCRIPTION NOTES Red Black White + (24V DC) - (24V DC) PWM Both joined to work without regulation. The fixture is supplied by default with the wires PWM and NEGATIVE separated, for dimming performance, thus expecting the wire PWM to be connected properly to the available interface (see table Page 1). For performing without dimming, join the wires PWM and NEGATIVE and connect them directly to the negative of the power supply equipment. To interconnect several units the connection must be done in parallel. Before running the wiring, check the connection specifications for equipment supply and / or control required by the technical documentation available. Type B: RGB 24V DC COLOR DESCRIPTION NOTES White + 24V DC 7 de 8

8 Black -24V DC Red PWM Canal R Green PWM Canal G Blue PWM Canal B To interconnect several units the connection must be done in parallel. Before running the wiring, check the connection specifications for equipment supply and / or control required by the technical documentation available. 8 de 8