B8088 B39182B8088P810 August 05,

Transcription

1 Band III Series/type: Ordering code: Date: Version: B39182P810 August 05, EPCOS AG Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited.

2 Application Low-loss for mobile telephone Band III systems Low insertion attenuation Low amplitude ripple Usable passband 75 MHz Single ended to balanced transformation in Antenna - Rx path Impedance transformation 50Ω to 100Ω in Antenna - Rx path high Tx - Rx isolation Features Package size 2.0 x 1.6 Component height 0.45 mm max. RoHS compatible Approximate weight g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitive Level max bottom view side view top view Pin configuration 1,8 RX Output (balanced) 3 TX Input (single ended) 6 Antenna 2, 4, 5 To be grounded 7, 9 To be grounded 1 8 2,7 3 4,5,9 6 2 August 05, 2013

3 Characteristics Temperature range for specification: T = 20 C to +85 C ANT terminating impedance: Z ANT = 50 Ω 3.9nH. RX terminating impedance: Z RX = 100 Ω (balanced) 12nH. TX terminating impedance: Z TX = 50Ω Characteristics TX-ANT typ. 25 C max. Center frequency f C MHz Maximum insertion attenuation α max MHz db MHz db Amplitude ripple per 5MHz channel α MHz db VSWR TX port MHz ANT port MHz Attenuation α MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db 3 August 05, 2013

4 Characteristics Temperature range for specification: T = 20 C to +85 C ANT terminating impedance: Z ANT = 50 Ω 3.9nH. RX terminating impedance: Z RX = 100 Ω (balanced) 12nH. TX terminating impedance: Z TX = 50Ω Characteristics ANT-RX typ. 25 C max. Center frequency f C MHz Maximum insertion attenuation α max MHz db Amplitude ripple per 5MHz channel α MHz db Common mode rejection ratio MHz 23 1) 25 db VSWR RX port MHz ANT port MHz Attenuation α MHz db MHz db MHz db MHz db MHz db IMD Product Level Limits 2) at f TX =1747.5MHz, f RX =1842.5MHz α Blocker MHz -115 dbm Blocker MHz -114 dbm Blocker MHz -110 dbm Blocker MHz -116 dbm 1) A combination of 10 phase balance and 1 db amplitude balance corresponds to 19.6 db CMRR 2) IMD product level limits for power levels P TX =21dBm (antenna port output power) and P Blocker =- 15dBm (antenna port input power) 4 August 05, 2013

5 Characteristics Temperature range for specification: T = 20 C to +85 C ANT terminating impedance: Z ANT = 50 Ω 3.9nH. RX terminating impedance: Z RX = 100 Ω(balanced) 12nH. TX terminating impedance: Z TX = 50Ω Characteristics TX-RX typ. 25 C max. Differential Mode Isolation α MHz db MHz db Common Mode Isolation MHz db 5 August 05, 2013

6 Characteristics Temperature range for specification: T = 25 C ANT terminating impedance: Z ANT = 50 Ω 3.9nH. RX terminating impedance: Z RX = 100 Ω (balanced) 12nH. TX terminating impedance: Z TX = 50Ω Characteristics TX-ANT typ. 25 C max. Center frequency f C MHz Maximum insertion attenuation α max MHz db MHz db Amplitude ripple per 5MHz channel α MHz db VSWR TX port MHz ANT port MHz Attenuation α MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db MHz db 6 August 05, 2013

7 Characteristics Temperature range for specification: T = 25 C ANT terminating impedance: Z ANT = 50 Ω 3.9nH. RX terminating impedance: Z RX = 100 Ω (balanced) 12nH. TX terminating impedance: Z TX = 50Ω Characteristics ANT-RX typ. 25 C max. Center frequency f C MHz Maximum insertion attenuation α max MHz db Amplitude ripple per 5MHz channel α MHz db Common mode rejection ratio MHz 23 1) 25 db VSWR RX port MHz ANT port MHz Attenuation α MHz db MHz db MHz db MHz db MHz db IMD Product Level Limits 2) at f TX =1747.5MHz, f RX =1842.5MHz α Blocker MHz -115 dbm Blocker MHz -114 dbm Blocker MHz -110 dbm Blocker MHz -116 dbm 1) A combination of 10 phase balance and 1 db amplitude balance corresponds to 19.6 db CMRR 2) IMD product level limits for power levels P TX =21dBm (antenna port output power) and P Blocker =- 15dBm (antenna port input power) 7 August 05, 2013

8 Characteristics Temperature range for specification: T = 25 C ANT terminating impedance: Z ANT = 50 Ω 3.9nH. RX terminating impedance: Z RX = 100 Ω(balanced) 12nH. TX terminating impedance: Z TX = 50Ω Characteristics TX-RX typ. 25 C max. Differential Mode Isolation α MHz db MHz db Common Mode Isolation MHz db 8 August 05, 2013

9 Maximum ratings Storage temperature range T stg 40 / +85 C DC voltage V DC 5 V ESD voltage V ESD 50 1) V machine model, 10 pulses V ESD 300 2) V human body model, 1 pulse Input Power at P IN MHz 29 dbm continuous wave elsewhere 10 dbm } T = 55 C, h 1) acc. to JESD22-A115B (machine model), 10 negative & 10 positive pulses. 2) acc. to JESD22-A114F (human body model), 1 negative & 1 positive pulse. 9 August 05, 2013

10 Frequency Response TX-ANT Frequency Response TX-ANT (wideband) 10 August 05, 2013

11 Frequency Response RX-ANT Frequency Response RX-ANT (wideband) 11 August 05, 2013

12 Frequency Response TX-RX (differential mode) Frequency Response TX-RX (differential mode, wideband) 12 August 05, 2013

13 Frequency Response TX-RX (common mode) Frequency Response Common Mode Rejection Ration 13 August 05, 2013

14 VSWR at TX-, RX- and Antenna 14 August 05, 2013

15 References Type Ordering code Marking and Package Packaging Date Codes S-Parameters Soldering profile RoHS compatible Moldability B39182P810 C61157-A8-A64 F61074-V8247-Z0000 L_1126 _NB_UN.s4p, _WB_UN.s4p See file header for pin/port assignment. S_6001 defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog and Data Library for circuit simulation For further information please contact your local EPCOS sales office or visit our webpage at Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box , Munich, GERMANY EPCOS AG This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 15 August 05, 2013

16 Important notes The following applies to all products named in this publication: The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for 1. Some certainparts areas of this of publication application. contain These statementsabout are based the suitability on our knowledge of our products of typical for certain requirements areas that of are application. often placed These on our statements products in are thebased areason of application our knowledge concerned. of typical We requirements nevertheless that expressly are often point placed out that on our such products statements in the areas cannot of application be regarded concerned. as binding We nevertheless statements about expressly the suitability point out that of our such products statements for a particular cannot be customer regarded application. as binding statements As a rule, EPCOS about the is either suitability unfamiliar of our with products individual for customer a particular applications customer orapplication. less familiar As witha rule, themepcos than the is either customers unfamiliar themselves. with individual For these customer reasons, applications it is always or less ultimately familiar with incumbent them than on the the customers check themselves. and decide For these whether reasons, an EPCOS it is always productultimately with the incumbent properties described on the customer in the product to check specification and decide is suitable whether for an use EPCOS in a particular product customer with the properties application. described in the product specification is suitable for use in a particular customer 2. application. We also point out that in individual cases, a malfunction of electronic components or 2. We failure also before point out thethat endin ofindividual their usual cases, service a malfunction life cannot be of completely electronic components ruled out in the or failure currentbefore state of the the end art, of even their if usual they service are operated life cannot as specified. be completely In customer ruled applications out in the current requiringstate a very of the highart, level even of operational if they are safety operated andas especially specified. in In customer applications in requiring which thea malfunction very high level or failure of operational of an electronic safety and component especially could in customer endangerapplications human life in or which health the (e.g. malfunction in accidentor prevention failure of or an life-saving electronic systems), component it could must therefore endanger be human ensured life by or health means(e.g. of suitable in accident design prevention of the customer or life-saving application systems), or other it must action therefore taken bybe thensured customer by means (e.g. installation of suitable ofdesign protective of the circuitry customer or redundancy) application or that other no injury action or taken damage by the is sustained customer (e.g. by third installation parties in of the protective event of circuitry malfunction or redundancy) or failure of an that electronic no injury component. or damage is sustained 3. by The third warnings, parties in cautions the event and of malfunction product-specific or failure notes of an must electronic be observed. component The In order warnings, to satisfy cautions certainand technical product-specific requirements, notes some must of the be products observed. described in this 4. In publication order to satisfy may contain certain technical substances requirements, subject tosome restrictions of the in products certain jurisdictions described in (e.g. this publication because they may are contain classed substances as hazardous). subject Useful to restrictions informationin on certain this will jurisdictions be found in(e.g. our because Material Data they Sheets are classed on theas Internet hazardous). ( Useful information on Should this will yoube have found anyin more our Material detailed Data questions, Sheets please on the contact Internet our ( sales offices. Should you have any more 5. detailed We constantly questions, striveplease to improve contact our our products. sales offices. Consequently, the products described in this 5. We publication constantly may strive change to improve fromour time products. to time. Consequently, The same is true the of products the corresponding described product in this publication specifications. may Please change check from therefore time to totime. whatthe extent same product is true descriptions of the corresponding and specifications product specifications. contained in this Please publication check are therefore still applicable to what extent before product or when descriptions you place an and order. specifications contained We also reserve in this publication the right are to discontinue still applicable production before or when and delivery you place of an products. order. Consequently, also reserve we cannot the guarantee right to discontinue that all products production namedand in this delivery publication of products. will always Conse- be We quently, available. we The cannot aforementioned guarantee does that not all products apply in the named case in of individual this publication agreements will always deviating be available. from the foregoing The aforementioned customer-specific does not apply products. in the case of individual agreements deviating 6. from Unless the otherwise foregoing for agreed customer-specific in individual products. contracts, all orders are subject to the current 6. Unless versionotherwise of General agreed Terms in individual of Delivery contracts, for Products all orders and are Services subject into the the Electrical current version Industry of published the General by Terms the German of Delivery Electrical for Products and Electronics and Services Industry in the Association Electrical Industry (ZVEI). published by the German Electrical and Electronics Industry Association 7. (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, 7. The CTVS, trade DeltaCap, names DigiSiMic, EPCOS, BAOKE, DSSP, FilterCap, Alu-X, CeraDiode, FormFit, MiniBlue, CeraLink, MiniCell, CeraPlas, MKD, CSMP, MKK, MLSC, CSSP, CTVS, MotorCap, DeltaCap, PCC, DigiSiMic, PhaseCap, DSSP, PhaseCube, FilterCap, PhaseMod, FormFit, MiniBlue, PhiCap, MiniCell, SIFERRIT, MKD, SIFI, MKK, SIKOREL, MLSC, MotorCap, SilverCap, SIMDAD, PCC, PhaseCap, SiMic, SIMID, PhaseCube, SineFormer, PhaseMod, SIOV, SIP5D, PhiCap, SIP5K, SIFERRIT, ThermoFuse, SIFI, SIKOREL, WindCap SilverCap, are trademarks SIMDAD, registered SiMic, SIMID, or pending SineFormer, Europe SIOV, andsip5d, in other SIP5K, countries. ThermoFuse, Further information WindCap are will trademarks be found on the registered Internet or at pending in Europe and in other countries. Further information will be found on the Internet at 16 August 05, 2013