m/min Digital panel meter with 4½-digit PV4, PT4, PF4, PW4 galvanically insulated 8 free scalable setpoints/hysteresis optical setpoint indication
|
|
- Horace Hilary O’Brien’
- 5 years ago
- Views:
Transcription
1 P m/min Digital panel meter with 4½digit PV4, PT4, PF4, PW4 galvanically insulated free scalable setpoints/hysteresis optical setpoint indication analog galvanically insulated sens supply galvanically insulated interface min/max memy status /0/04 panelmeter6x4analog_gb.doc page subject to alterations; errs including printer s errs 6x4
2 Digital panel meter Direct voltage Direct current Frequency Alternating voltage Alternating current Weighing technology Resistance Potentiometer PT00 Thermocouple P m/min Direct voltage, direct current ORDER NUMBER OF TYPE (without options) 0 V 0 V 6 00 V 600 V 0/40 ma 00 ma 0 V signal input (DC) 0 sens supply 3 Power supply 30/ Power supply Power supply PV 4.00.B PV B PV 4.00.B connections see page Alternating voltage, alternating voltage V 0 V 6 00 V 400 V A A 0 V signal input (AC) 0 3 Power supply 30/ Power supply Standard PV B True effective value RMS PV 4.04.B Standard PV B True effective value RMS PV 4.04.B Resistance, potentiometer measurement range M Ohm range 00K Ohm range 0K Ohm 3 4 Rx Power supply 30/ Power supply Power supply PV B PV B PV B Thermocouple L, J, K, S and N thermocouple Type L (FeCuNi D) 00 up to 00 C Type J (FeCuNi americ.) 00 up to 00 C Type K (Pt0RhPT) 0 up to 30 C Type S (NiCrNi) 0 up to 0 C Type N (NiCrSiNiSi) 0 up to 300 C Power supply 30/ Power supply PT 4.40x.B PT 4.40x.B PT00 (wire) 6 PT00 (wire) 0 3 wire Power supply 30/ (600 C) PT 4.06.B wire Power supply (600 C) PT 4.06.B status /0/04 panelmeter6x4analog_gb.doc page subject to alterations; errs including printer s errs PV4, PT4 6x4
3 PT00 (3 wire) ORDER NUMBER (without options) 6 PT00 (wire) 6 PT00 (3wire) wire Power supply 30/ (600 C) PT B 3 wire Power supply (600 C) PT B PT00 (4 wire) 6 PT00(4wire) 0 3 4V DC V AC 30V AC 4 wire Power supply 30/ (600 C) PT 4.06.B 4 wire Power supply (600 C) PT 4.06.B Frequency metering bridge 3 impulse input 4 sens supply 6 impulse 0 3 Power supply 30/ Power supply Power supply PF 4.30.B PF B PF 4.30.B Connection diagrams see page Weighing technology P bar Amplifier with tare function (strain gauge) 3 4 input input bridge bridge 6 Tara key (galvanically insulated) GND TXD 0 analog 3 Measuring input mv/v Power supply 30/ PW 4.0.B Power supply PW 4.0.B Measuring input mv/v Power supply 30/ PW 4.0.B Power supply PW 4.0.B Measuring input 3.3 mv/v Power supply 30/ PW 4.03.B Power supply PW 4.03.B Setpoints and open collect connections (optionally f all types PV, PT, PF and PW) S S S3 S S S S3 S4 S S6 S S 0 V UB status /0/04 panelmeter6x4analog_gb.doc page 3 subject to alterations; errs including printer s errs PT4, PF4, PW4 6x4
4 OPTIONS PV Direct voltage PV Alternating volatge PV Resistance PT 4.40x... Thermocouple PT PT00(,3,4 wire) PF Frequency PW 4.0x... DMS Additional price EUR LED green x x x x x x x Handling behind front pane (IP40) x x x x x x x Handling behind front pane (IP4) x x x x x x x 6, Foil keyboard with protection IP4 x x x x x x x 6, Foil keyboard with protection IP6 x x x x x x x 0, Plug in terminal x x x x x x, Sens supply /0 ma (supply voltage 30/ and ) x x 4, Sens supply 0 VDC/0 ma (supply voltage 30/ and ) x x 4, Sens supply V DC/0 ma (supply voltage 30/) x 0, Sens supply /0 ma (supply voltage galv. insulated) x x 3,0 Sens supply 0 VDC/0 ma (supply voltage galv. insulated) x x 3,0 Sens supply /00 ma maximum 3 setpoints x x 6,3 (supply voltage 30/ and galvanically insulated) Sens supply 0 VDC/0 ma maximum 3 setpoints x x x 6,3 (supply voltage 30/ and galvanically insulated) With supply voltage AC and DC the sens supply is galv. insulated from the measuring input. Analog 00 VDC/ bit (supply voltage 30/ and ) x x x x x x x,0 Analog 00 ma/load 00 Ω (supply voltage 30/ and ) x x x x x x x, Analog 40 ma/load 00 Ω (supply voltage 30/ and ) x x x x x x x, Analog 00 VDC ( bit) (supply voltage galv. insulated) x x x x x x x 0, Analog 00 ma/load 00 Ω (supply voltage galv. insulated) x x x x x x x 0,3 Analog 40 ma/load 00 Ω (supply voltage galv. insulated) x x x x x x x 0,3 Digital RS4 (6, N,, ) x x x x x x x, Digital RS3 (6, N,, ) x x x x x x x, relay x x x x x x x 3,0 relay s x x x x x x x 46,00 4 relay s x x x x x x x 66,4 open collect s x x x x x x x 46,00 TTL input (S4) x,0 Measuring input 0 ma (= Plus and = Minus) S0 x,3 Hold function via connection 34 (activation via 0 key) S4 x 46,00 Min/max memy permanent/external reset (S) x 6,0 0 points linearization (S3) x 6,0 Reciprocal indication on demand x Other voltage supplies on demand x x x x x x x Dimension strips selectable x x x x x x x Technical data f all units of the PV4, PT4, PF4, PW4 series, if not indicated otherwise Dimensions Housing B6 x H4 x T34 mm, including screw terminal (T= mm, including plug in terminal) Assembly cut out.0 0. x mm Fastening special quick plastic clamp proper to fix in wall thickness up to 0 mm Housing material PC/ABSblend, colour black, UL4V0 Protective system at the front IP40 connection IP00 Weight approx. 0.4 kg Connection via rear side via terminals up to. mm Input PV Direct voltage, direct current Measuring range 00 V, 0 V, 00 V, 600 V, 00 ma 40 ma, 000 ma All ranges selectable via connection terminal Input resistance Ri with 0 V = ~00 kω 600 V = ~.6 MΩ 0 V = ~00 kω 0 ma = ~00 Ω 00 V = ~.0 MΩ 00 ma = ~0 Ω PV Alternating voltage, Alternating current Measuring range 0 V, 0 V, 00 V, 400 V, A, A All ranges selectable via connection terminal status /0/04 panelmeter6x4analog_gb.doc page 4 subject to alterations; errs including printer s errs 6x4
5 Technical data PV Alternating voltage, Alternating current Input resistance Ri with V = ~0 kω 400 V = ~4 MΩ 0 V = ~00 kω A = ~6 mω 00 V = ~ MΩ A = ~6 mω PV Resistance Measuring range 0 kω, 00 kω, MΩ All ranges selectable via connection terminal PT 4.x06... PT00 Sens wire, 3 wire, 4 wire Measuring range 00.0 up to 600 C Sens current approx. ma Linearization accding to D IEC PT4.40x... Thermocouple L FeCuNi (D) 00 up to 00 C J FeCuNi (americ.) 00 up to 00 C K NiCrNi 0 up to 30 C S Pt0RhPt 0 up to 0 C N NiCrSiNiSi 0 up to 300 C PF Frequency Sens, 3 wire initiat, impulse input Input resistance Ri with 0 V = ~0 kω High/low level =>. V / <4. V Input frequency Hz up to 00 khz PW 4.0x... DMS amplifier Sens sensitivity mv/v mv/v 3.3 mv/v Output F all versions Relay s max. 4 change over contacts Charge / A 0 VDC/0. A Open collect s galvanically coupled with the measuring inputs supply by customers (UB = 0 VDC / I max. = 400 ma) PV PF PW 4.0x... Analog Digital Sens supply Bridge supply 00 VDC ( bit) Ri ~ 00 Ω 00 ma ( bit) load 00 Ω 40 ma ( bit) load 00 Ω With supply voltage AC and DC the analog is separated from measuring input by galvanically insulation! RS3/RS4 600 baud, no parity, data bits, stop bit (galv. insulated from the measuring input f 30/ and /DC) /0 ma 0 VDC/0 ma (other sens supplies/perfmances on demand) (galv. insulated from the measuring input f 30/ and /DC) 0 VDC/0 ma (other bridge supplies/perfmances on demand) Accuracy F all versions Resolution / digit PT 4.x C PT 4.40x... C PF F all versions Measuring fault /0.% of measuring range, /0.0% of final value, / digit PV Frequency range Nominal precision 40 Hz up to 000 Hz Measuring fault Voltage range: /0.% of measuring value, /0.0% of final value, / digit A range: /0.% of measuring value, /0.0% of final value, / digit A range: /% of measuring value, /0.0% of final value, / digit Measuring principle (input) Via rectifier (effective value with sine wavefm only) PV Frequency range Nominal precision 40 Hz up to 000 Hz Measuring fault Voltage range: /0.% of measuring value, /0.0% of final value, / digit, crestfact 3 A range: /0.% of measuring value, /0.0% of final value, / digit, cestfakt 3 A range: /% of measuring value, /0.0% of final value, / digit, cestfakt 3 Measuring principle (input) True effective value RMS PT 4.x06... Measuring fault /0.% of measuring value, /0.0% of final value PT 4.40x... Measuring fault max. Kelvin, / digit PF Measuring fault /0.04% of input frequency, / digit status /0/04 panelmeter6x4analog_gb.doc page subject to alterations; errs including printer s errs 6x4
6 Technical data PV Temp. drift ~ 00 ppm/k PV I ~ 00 ppm/k / U ~ 00 ppm/k PV ~ 00 ppm/k PT4.40x... ~ 00 ppm/k PT4.x06... ~ 00 ppm/k PF ~ 40 ppm/k PW4.0x... ~ 00 ppm/k F all versions Measuring principle Dual Slope Integration PF Measuring principle Frequency/pulse width measuring Power unit Supply voltage 30/ / 0% (060 Hz), (30 V), (/0%) galv. insulated Power consumption max. VA Indication Display LED with segments, mm high, red 4½digit = indication F all versions Overflow Indication of 4 transversal bars PT 4.40x... Line break Indication of 4 transversal bars PW F all versions Indication time 0. 0sec. adjustable Ambient Wking temperature 0 up to 60 C conditions Sting temperature 0 up to 0 C Housing: mm 4 mm 6 mm mm 3 mm (with plug in terminal mm) 6 mm Assembly cut out 0, mm,0 mm 0,0 mm 4,0 mm 0,6 mm 0,0 mm status /0/04 panelmeter6x4analog_gb.doc page 6 subject to alterations; errs including printer s errs 6x4
7 Connection diagrams PV 4... instruments without sens supply wire: 40 ma 3wire: 00 ma 3wire: 00 V / 0 V 40 ma 0 V / 6 V i.e. /DC i.e. /DC i.e./dc PV 4...instruments with sens supply wire: 40 ma 3wire: 00 ma 3wire: 00 V / 0 V 40 ma 0 V / 6 V i.e. /DC i.e. /DC i.e. /DC wire: 40 ma 3wire: 00 ma 3wire: 00 V / 0 V 40 ma 0 V / 6 V i.e. i.e. i.e. PF instruments with frequency, impulse input Bridge Bridge Bridge i.e. 3 3 Pull up Pull up Pull up 3wire NPN i.e. 3wire NPN 3wire NPN 3 3 Pull down Pull down Pull down 3wire PNP i.e. 3wire PNP 3wire PNP status /0/04 panelmeter6x4analog_gb.doc page subject to alterations; errs including printer s errs 6x4
72x36. Digital panel meter with microprocessor based technology 4-digit PVE4, PTE4, PFE4, PFL4. Galvanically insulated
P VA Digital panel meter with microprocess based technology digit PVE, PTE, PFE, PFL Galvanically insulated free scalable s/hysteresis Analogue galvanically insulated Min/max memy status //0 panelmeterx6analog_gb.doc
More information96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status 06/03/0 panelmeter_gb.doc page subject to alterations; errs including printer s errs Digital panel meter Direct voltage
More information96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status /0/04 panelmeter6x4_gb.doc page subject to alterations; errs including printer s errs 6x4 Digital panel meter Direct
More information48x48. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output
kw Digital panel meter ½-digit DV, DT Without setpoints Analog status /0/04 - panelmeter_gb.doc page subject to alterations; errs including printer s errs Digital panel meter Direct voltage Direct current
More informationDIGITAL PANEL INSTRUMENTS
DIGITAL PANEL STRUMENTS PVE, PTE, PFE, PFL Programmable Digital Panel Instrument x mm Programmable digital panel f moniting and control with different interfaces and inputs Direct voltage / current PT00/PT000
More informationminimal installation depth: 70 mm without plug-in terminal 30 additional adjustable setpoints (parameter driven)
Digital panel meter 5-digit M2 red display of -19999 99999 digits (optional green, orange, blue or tricolour display) minimal installation depth: 70 mm without plug-in terminal adjustment via factory default
More informationinstallation depth: 90 mm without plug-in terminal 30 additional adjustable setpoints permanent MIN/MAX-value recording volume measuring (totaliser)
Digital panel meter 5-digit M3 red display from -19999 99999 Digits (optional green, orange or blue display) installation depth: 90 mm without plug-in terminal adjustment via factory default or directly
More informationDIGITAL PANEL INSTRUMENTS
M2-1V.../ M2-1T... M2-1V.../ M2-1T... Case 96 x 48 mm Programmable Digital Panel 96 x 48 mm Red display of -1999 up to 99999 (optional green, orange, blue or tricolour display) Minimal installation depth:
More informationDigital panelmeter with microprocessor based technology 5 digit. 4 free scalable setpoints/hysteresis/delay time (option)
1 2 3 4 P Digital panelmeter with microprocessor based technology 5 digit PU5 Universal measuring input free configurable Measuring inputs: voltage, current, shunt, thermocouple, resistance, resistor thermocouple
More informationinstallation depth: 90 mm without plug-in terminal display flashing at threshold exceedance / threshold undershooting
Digital panel meter 5-digit M3 red display from -19999 99999 Digits (optional green, orange or blue display) installation depth: 90 mm without plug-in terminal min-/max-memory 30 additional adjustable
More informationminimal installation depth: 57 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 57 mm without plug-in terminal adjustment via factory default or directly
More informationminimal installation depth: 25 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 25 mm without plug-in terminal adjustment via factory default or directly
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories Highquality digital indicator for panel mounting Model DI35M, with multifunction input Model DI35D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationLight-strip indicator
/2 s /2 PROLUX 96 x 24 mm with 5 segments, /6 PROLUX 144 x 24 mm with 101 segments, /10 PROLUX 144 x 6 mm with 71 segments, Siemens MP 12 200 PROLUX 96 x 24 mm with 5 segments, Design The PROLUX light-strip
More informationminimal installation depth: 97 mm without plug-in terminal min-/max-value recording display flashing at threshold undercut/ exceedance
Digital panel meter 4-digit M1 red display with -1999 9999 digits (optional green, orange or blue displays) minimal installation depth: 97 mm without plug-in terminal adjustment via factory default or
More informationSINEAX V 604s Programmable multifunctional transmitter
SINEAX V 60s f direct currents, direct voltages, temperature senss, teletransmitters potentiometers 00 SINEAX V60s is a multifunctional transmitter f top-hat rail assembly with the following main characteristics:
More informationTransmitter / Signal Conditioning
GHM GROUP CORPORATE GHM Messtechnik GmbH Schloßstr. 6 88453 Erolzheim GERMANY Phone +49 7354 937233-76 Fax +49 7354 937233-88 Transmitter / Signal Conditioning System Measuring input Direct connection
More informationDP2000 ORDERING GUIDE To Order MODEL NO.
1 8 DIN VERSATILE PROCESS MONITORS CONFIGURABLE DP2000-S, 1 8 DIN meter, shown smaller than actual size. DP2000 Series Complete with Input Board RoHS 2 Compliant DP2000-J1, with TJ36-ICSS-116G-12, transition
More informationPanel- and build-up-type digital displays
anel- and build-up-type digital displays roduct overview 2006 : Includes all our new build-up units with 7- segment-displays with 14 mm, 20 mm or 25 mm digit height, in protection I65! % 2 4 m/min e.g.:
More informationUniversal measuring transducer
Universal measuring transducer EM4000 Compact housing High accuracy Full galvanic separation MODbus (RS232/RS485) 3 Analogue + 1 Pulse output Direct voltagemeasurement up to 690V 48 hour service EXW ELEQ
More informationAdjustable Digital Process Instrument MDK480
Description The adjustable Digital Process Instrument MDK480 is designed to measure and display process variables in industrial applications.the instrument is panel mounted with front frame dimensions
More informationDigital Indicator DS 96/48 PK
Data Sheet 10/33-2.1-EN Digital Indicator DS 9/48 P Digital Indicator DS 9/48 PK Inputs Direct current, direct voltage Thermocouple Resistance thermometer Programmable via front keys or PC software Limit
More informationEconomical Digital Indicators For Process and Electrical Measurement
Economical Digital Indicators For Process and Electrical Measurement DP18 Series Panel Punches Available DP18-P5, 4 to 20 ma input. DP18-EC, thermocouple input visit omega.com/thermocouple for thermocouples.
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationN30P DIGITAL PANEL METER
N30P DIGITAL PANEL METER Features: NEW Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cosj, tgj, j, frequency, active, reactive and apparent energy,
More informationMAGTROL. LMU Series Load Monitoring Units. LMU Data Sheet. Description. Features
MAGTROL Data Sheet Series Load Monitoring Units Features For use with full-bridge strain gauge transducers (sensitivity 0.5 to 4 mv/v) Voltage input for load summation or for individual use (without sensor)
More informationJUMO di 32 / di 08. Brief description. Block structure
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 (0) 661 60 037 25 Fax: +49 (0) 661 60 036 81 EMail: mail@jumo.net Internet:
More informationAPPENDIX APPENDIX A 1
A 1 SPECIFICATIONS Ratings Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC, 50/60 Hz/24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 7VA 4VA/2.5W Sensor input Thermocouple
More informationDigital Multimeters R6451A/6452A. R6451A/6452A Digital Multimeters. 5 1/2 Digit DMM Series Enabling Dual Input and Display
5 1/2 Digit DMM Series Enabling Dual Input and Display R6451A/6452A R6451A: General-Purpose Low-Price DMM with Standard Functions R6452A: Full-Functional DMM with Dual- Channel Input and Dual Display (Photo
More informationDigital indicator for panel mounting With multi-function input Model DI25
Accessories Digital indicator for panel mounting With multi-function input Model DI25 WIKA data sheet AC 80.02 Applications Plant construction Machine tools Plastics technology and processing Ventilation
More informationSefram. Sefram SEFRAM A new family of thermal recorders 6 to 36 channels. Make sure to visit our Website
Make sure to visit our Website http://wwwseframfr Sefram Sefram SEFRAM A new family of thermal recorders 6 to 36 channels 6 to 36 analogue channels Measurement boards : - 6 isolated channels universal
More informationTheta 60R. Technical Data Sheet. Special Features. Fig. 2 Theta R, 2 channel version, in housing S17 hole mounting brackets pulled out.
Technical Data Sheet Theta 60R 60 R 60 R Fig. Theta R, channel version, in housing S7 clipped on to a top - hat rail. Fig. Theta R, channel version, in housing S7 hole mounting brackets pulled out. Theta
More informationRI-F200 Series. Single and Three Phase Multifunction Energy Meter. Telephone : +44 (0) Displayed Parameters
RI-F200 Series Single and Three Phase Multifunction Energy Meter DIN 96 panel mounted -/1A or -/5A current transformer input Single phase or three phase network compatible Programmable voltage and current
More informationGSV-1H 010/250/2. Highlights
GSV-1H 010/250/2 Highlights Taring function via control cable 250Hz filter in the standard design 2.5 khz or 10 khz filter optional Amplification configurable ±10V output signal optional 4...20mA output
More informationWeighing Instruments
GHM Messtechnik GmbH Sales Center International Schloßstraße 6 88453 Erolzheim Germany Fon +49-7354-937233-0 Fax -88 www.ghm-messtechnik.de info@ghm-messtechnik.de Weighing Instruments System Evaluation
More informationDIGITAL PANEL METERS. Overview of product range. Product selection guide. Info & advice. µdigi1 and µdigi2 ranges
ENERGY METERS 099 0 0 0 Overview of product range General overview Product selection guide by functions by applications Info & advice Keeping up with current changes µdigi and µdigi ranges x8 mm or 8x9
More informationADAM 4000/4100 Series
ADAM 4000/4100 Series Common Dimensions Communication RS-485 (2-wire) to host Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps (ADAM-4080, ADAM-4080D only support up to 38400 bps) Max. communication
More informationDVM98. True RMS Digital Multimeter. 1 Safety information. 1.1 Preliminary. 1.2 During use
True RMS Digital Multimeter DVM98 1 Safety information This multimeter has been designed according to IEC - 1010 concerning electronic measuring instruments with an overvoltage category (CAT II) and pollution
More informationEnergy Management Energy Meter with plug-in Output Modules Type EM4-DIN
Energy Management Energy Meter with plug-in Output Modules Type EM4-DIN Degree of protection (front): IP 40 Front dimensions: 9 DIN modules RS 422/485 Serial port by means of optional module Dual pulse
More informationMeasurement and Instrumentation
POWER QUALITY ENERGY PERFORMANCE Measurement and Instrumentation Overview of ranges Selection guide Info & advice Economical range for industrial use μdigi1 - μdigi2 ranges Programmable range for universal
More informationModule Input type Ranges TEDS Filters (LP = lowpass, HP = highpass) Piezoresistive bridge ±0.5 to mv/ma 1 ma exc
HSI Series Modules Selection Guide HSI Series Modules Single channel High bandwidth - for dynamic signals Isolation (all models Analog signal output (±5 V Single channel modularity For DEWETRON systems
More informationSEFRAM DAS Sefram. Sefram. A new family of paperless recorders 6 to 72 channels, to cover all your applications
Sefram SEFRAM Make sure to visit our Website http://wwwseframfr A new family of paperless recorders 6 to 72 channels, to cover all your applications 6 to 72 analogue channels Measurement boards : - 6 isolated
More informationWeighing Instruments. Applications. Characteristics. DMS strain gauges (load cells), DMS amplifier
GHM GROUP CORPORATE GHM Messtechnik GmbH Schloßstr. 6 88453 Erolzheim GERMANY Phone +49 7354 937233-76 Fax +49 7354 937233-88 Weighing System Evaluation Mounting DMS strain gauges (load cells), DMS amplifier
More informationDigital Panel Meters DC/AC Current and Voltage Indicator/Controller Type LDM40
Digital Panel Meters Current and Voltage Indicator/Controller Type LDM40 Multi-input instrument 4-DGT LED 0.1% RDG basic accuracy TRMS AC current and voltage measurements AC/DC current measurements: selectable
More informationPosition Indicator with/without Limit Values
.1 Position Indicator with/without Limit Values Large, 6-digit, 14 mm high LED display Prescaler 2 variable limit values Eeasy direct selection by 2 function keys Rrelay output with two change-over contacts
More informationSPECIFICATIONS. Superluminous SunBright display Readable from 100 feet away
PD2-6000 Helios Process Meter 0-20 ma, 4-20 ma; ±10 VDC (0-5, 1-5, 0-10 V); Modbus PV (slave) Dual-scale for applications 32-point, square root, exponential, or round horizontal tank linearization Tare
More informationPreset counters, electronic
The Codix 716 / 717 can be used universally. These preset pulse, tachometers or preset timers with up to 2 presets can solve a wide variety of control and monitoring tasks in every application. With their
More informationEnergy Management Three-phase energy meter with output modules Type EM4-DIN
Energy Management Three-phase energy meter with output modules Type EM4-DIN Class 1 (active energy) Class 2 (reactive energy) Three-phase multi-function energy meter Back-lighted LCD display 3 1 / 2 DGT
More informationAnalog Digital Multimeter with Insulation Resistance Measurement
RISH MIT 30 Product Features: RISH MIT 30 is Analog Digital Multimeter with insulation resistance measurement, which measures VAC, VDC, VAC+DC,Frequency, ma DC, ma AC+DC,Resistance, continuity, Diode,
More informationFlexible Counter Series in DIN size 24 x 48 mm
Flexible Counter Series in DIN size 24 x 48 mm high contrast 8-digit LCD display or brilliant 6-digit LED display different supply voltages available: independent of mains supply with lithium battery or
More informationQ.raxx A slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field of stationary
More informationDigital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel
Digital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel Digital-analogue meters of LEL-NA series with a multicolour bargraph have a universal input destined
More informationDIGEM f 96 x 48 EK. Applications. Description
3-349-002-03 1/7.98 Front panel dimensions: 96 x 48 mm LED display: red or green, 14 mm high Max. display range: 19 999 to + 32 765 Modular connectors for flexible use Simple adjustments at front panel
More informationCONTA-ELECTRONICS. Converter Units
CONTA-ELECTRONICS Whether for manufacturing, electrical machine and plant instrumentation, control engineering, power distribution, building automation, or process engineering it is always important to
More information- SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND LINEAR INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION
ADVANCED - CONTROLLERS - SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION (ma) OUTPUTS - 4x EVENT OR ALARM OUTPUTS
More informationMAGTROL. LMU 116 Load Monitoring Unit. LMU 116 Data Sheet FEATURES DESCRIPTION SYSTEM CONFIGURATION
Data Sheet Load Monitoring Unit FEATURES For Use with Full-bridge Strain Gauge Transducers (Sensitivity 0.5 to 2 mv/v) Voltage Input for Different Charge Summation Summer with 4 Inputs Taring Facility
More informationModel 4800 O P E R AT I O N M A N U A L L O A D C E L L S U M M I N G T R A N S M I T T E R
O P E R AT I O N M A N U A L Model 4800 L O A D C E L L S U M M I N G T R A N S M I T T E R CALEX Manufacturing Company, Inc. Concord, California 94520 Ph: 925/687-4411 800/542-3355 Fax: 925/687-3333 http://www.calex.com
More informationPID CONTROLLERS LT SERIES
PID CONTROLLERS LT SERIES The Axis family of microprocessor based controllerscombine a high degree of functionality and reliability at a very low price, in 4 different formats : 1/16 DIN, 1/8 DIN, 1/ 4
More informationDEIF A/S. Insulation monitor. Type SIM-Q/SIM-Q LF
/ LF Insulation monitor Monitoring of insulation resistance on ungrounded AC networks (IT network) Working voltage up to 69V AC, withstands up to V DC Measuring range...kω or 1...MΩ Working frequency down
More informationTwo-channel safety barriers Series 9002
Two-channel safety s Series 00 > Wide product range for all standard applications of the automation > Flexible and space-saving available in single and double channel versions > Time-saving installation
More informationQ.raxx A101-8 slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack mount unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field
More informationEnergy Management Modular Smart Power Transducer Type SPT-90
Energy Management Modular Smart Power Transducer Type SPT-90 Class 0.5 (current/voltage) 16-bit µp-based modular smart power transducer Measurements of: W, Wavg, VA, VAr, PF, Wh, VAh, VArh, Amax (among
More informationTransducer for Measurement Bridges SCM90, SIGS15
Transducer for Measurement Bridges SCM90, SIGS15 General Description Transducer for measurement bridges for DINrails and for printed circuit boards. Programmable ranges and bridge supply, voltage or current
More informationPRODIS. PD-INC Digital Process Meter for sensors with incremental output. Digital Process Meters. Datasheet
Digital Process Meters Digital Process Meter for sensors with incremental output Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does
More informationONEXIS AUTOMATIONS PVT LTD B-8, First Floor, Industrial Area, Sector - 64, NOIDA , U.P, India Ph:
X A L I S XALIS is a new digital indicator range with 2 colors numerical and alphanumerical display designed to provide display and signals transmission solutions. XALIS disign allows exceptional performances
More informationEnergy Management Power Analyzer with plug-in Output Modules Type W M22-DIN
Energy Management Power Analyzer with plug-in Output Modules Type W M22-DIN Front dimensions: 9 DIN modules Analogue output by means of optional module (20mA or 10VDC) RS 422/485 Serial port by means of
More informationOptical laser distance sensors. Dimensioned drawing
Dimensioned drawing en 02-2012/11 50112361 150 800mm 10-30 V DC We reserve the right to make changes DS_ODSL96BS800_en_50112361.fm Small laser light spot for measurements on small, structured or metallic
More informationConnection. Input EEx ia IIC. Sense. Fine tuning adjustment. Fine tuning amplifying. Amplifying. Adjustment. Output. Composition
Converter Connection 1-channel EEx ia IIC for 4-wire and 6-wire bridges Analogue output 0/4 ma... 20 ma or 4mA...-12mA Full bridge load cells and strain gauges circuit for resistance bridges up to 17 Ω
More informationDRG-SC Series Signal Conditioners
DRG-SC Series Signal Conditioners DRG-SC Series 245 Basic unit Models Available for Thermocouples, RTDs, DC Voltage and Current, Frequency, Strain Gage Bridge, AC Voltage and Current Field Configurable
More informationPEM353. Universal measuring device
353 Universal measuring device 353_D00335_00_D_XXEN/06.2018 353 Universal measuring device Product description The digital universal measuring device 353 is used to record and display measured quantities
More information1 INTRODUCTION ORDER CODE / INFORMATION
INTRODUCTION ORDER CODE / INFORMATION 269/269Plus * * * * * * 269/269Plus SV D/O.4 ORDER CODE / INFORMATION Motor management relay Standard version Drawout version Phase CT Ground CT (required for D/O
More informationMultipoint measuring units UPM100 and Centipede100
OTTINGER ALDWIN ESSTECHNIK HBM Mess- und Systemtechnik GmbH Multipoint measuring units UPM100 and Centipede100 S 33.UPM100.10 e Multipoint measuring units UPM100 and Centipede100 HBM s multipoint measurement
More informationRISH MIT 30 Analog Digital Multimeter with Insulation Resistance Measurement
RISH MIT 30 Analog Digital Multimeter with Insulation Resistance Measurement Data Sheet Analog Digital Multimeter with Insulation resistance www.rishabh.co.in Page 1 of 6 Version: J 28/12/2011 Application
More informationEnergy Management Modular Power Analyzers Type WM2-96
ISE, Inc. - 10100 Royalton Rd. - Cleveland, OH 44133 USA Energy Management Modular Power Analyzers Type WM2-96 - Tel: (440) 237-3200 - Fax: (440) 237-1744 - http://instserv.com Class 1 Modular power analyzer
More informationDEIF A/S. Insulation monitor. Type SIM-Q
Insulation monitor 4921232C Monitoring of insulation resistance on ungrounded AC networks (IT network) Working voltage up to 69V AC, withstands up to V DC Measuring range 1...Mohm or 1...Mohm Alarm on
More informationIndustrial Interface The Signal Conditioning People
Loop Powered Products including: 420TW 420i RTD/TC-HEAD Isolating Terminal Blocks Loop Powered Isolators In-Head Transmitters DC/AC Powered Isolation including: ISOCON DUALCON SLIMCON TC-TC VCON STRAIN
More informationElectronic Thermostat TE-1 Version according to EN
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 3639 Fulda, Germany Postal address: 3635 Fulda, Germany Phone: +49 661 63- Fax: +49 661 63-67 e-mail: mail@jumo.net Internet: www.jumo.net JUMO
More informationИ М. 2 24VAC 50/60Hz, 24-48VDC VAC 50/60Hz
8 Pin Plug Type DIN W48 H48mm 8 Pin Plug Features Upgraded counting speed: 1cps / 3cps / kcps / 5kcps Selectable voltage input (PNP) method or no-voltage input () method Decimal point setting (fixed decimal
More informationFlow - Rotor. Characteristics. Applications. Mechanical-magnetical, Infrared. Quantity measurement for filling processes
GHM Messtechnik GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49 (0) 9402-9383 - 0 Fax +49 (0) 9402-9383 33 www.ghm-messtechnik.de info@ghm-messtechnik.de Flow - Rotor Characteristics Applications
More informationForce and strain sensors. Measure. Test. Control. Edition 2016
Force and strain sensors. Measure. Test. Control. Edition 2016 Force and strain sensors by Baumer combine tried and tested technology and sophisticated innovations. 1 Contents. Introduction 1 Product key
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer IN 1000-S N = 1000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Closed loop (compensated)
More informationCompoBus/D-type Digital Controller
CompoBus/D-type Digital Controller Digital Controller for the CompoBus/D and Conforming the DeviceNet Conforms the DeviceNet and connects a Programmable Controller without any programming. High performance
More informationTwo-channel safety barriers Series 9002
Two-channel safety s Series 00 > Wide product range for all standard applications of the automation > Flexible and space-saving available in single and double channel versions > Time-saving installation
More informationPower analyzers and Energy Meters. Multifunction indicator. Type WM12-DIN. Product Description. How to order WM12-DIN AV5 3 D X.
Power analyzers and Energy Meters Multifunction indicator Type WM12-DIN Accuracy ±0.5 F.S. (current/voltage) Multifunction indicator Display of instantaneous variables: 3x3 digit Variable system and phase
More informationSEIKA SB2i-NB3 or N2,N3,N4
SEIKA SB2i-NB3 or N2,N3,N4 SB2i-xxx INCLINOMETER 4- output signal Inclination ranges +/-5 degree +/-10 degree +/- 20 degree +/-30 degree +/-70 degree NB3 HIGH SENSITIV INCLINATION IN X Y +/- direction
More informationI PM. Current Transducer ITZ 5000-SB FLEX ULTRASTAB = 5000 A
urrent Transducer ITZ 5000-SB FLEX ULTRASTAB I PM = 5000 A For ultra-high precision measurement of current: D, A, pulsed..., with galvanic separation between primary and secondary. Separate magnetic head
More informationMultifunctional counter tico 772/773/774
Universally applicable as a tachometer, timer, shift counter, batch counter Easy to operate Four different backlight colours Intensity of backlighting can now be adjusted Large, clearly readable 48 x 48
More informationFeatures. Panel Meters with Advanced Signal Processing Capabilities K3HB
Panel Meters with Advanced Signal Processing Capabilities K3HB K3HB-X/Process Indicator K3HB-V/Weighing Indicator K3HB-H/Temperature Indicator K3HB-S/Linear Sensor Indicator Features Red-Green Display
More informationTemperature Controllers E5 J
Temperature Controllers Advanced PID Controller with Fuzzy Logic-Based Adaptive Tuning Provides Optimum Performance Available in 3 standard DIN sizes: Choose 1/4, 1/8 and 1/16 DIN Fuzzy adaptive tuning
More informationEnergy Management. Type WM14-96 Basic Version. Product Description. How to order WM14-96 AV5 3 D PGX. Type Selection. Input specifications.
Energy Management Power Analyzer Type WM-96 Basic Version Optional dual pulse output Alarms (visual only) V, An Optional galvanically insulated measuring inputs Product Description 3-phase power analyzer
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 200-S ULTRASTAB I PM = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
More informationENGLISH WM3-96. ISE, Inc Royalton Rd. - Cleveland, OH USA - Tel: (440) Fax: (440)
ISE, Inc. - 10100 Royalton Rd. - Cleveland, OH 44133 USA - Tel: (440) 237-3200 - Fax: (440) 237-1744 - http://instserv.com WM3-96 OPERATING INSTRUCTIONS General features 2 Technical features 3 Installation
More informationMAGTROL. LMU 112 and LMU 117 Load Monitoring Units. LMU 112 / LMU 117 Data Sheet LMU 112 FEATURES LMU 117 FEATURES DESCRIPTION SYSTEM CONFIGURATION
Data Sheet LMU 112 and LMU 117 Load Monitoring Units LMU 112 FEATURES For Use with Full-bridge Strain Gauge Transducers (Sensitivity 0.5 to 2 mv/v) Voltage Input for Different Charge Summation 2 Level
More informationAssembly. Front view. Parametrization interface. Power Bus
Temperature Converter Features Assembly 1-channel signal conditioner 24 V DC supply Thermocouple, RTD, potentiometer or mv input Input for PTC thermistor Current and voltage output Line fault (LFD) and
More informationMETRA HIT 28C Calibrator, Multimeter and Milliohmmeter
3-349-098-03 3/2.04 Universal calibrator, simulator and multimeter ma / mv V / C (Pt100/1000, Ni100/1000, type J, L, T, U, K, E, S, R, B and N thermocouples) / 30 2000 Ω Dual mode simultaneous simulation
More informationD7F. Detects Changes in Machine. Vibration. Vibration Sensor with Linear Output or Manual Setting. Ordering Information
with Linear Output or Manual Setting Detects Changes in Machine ON/OFF output can be set and checked quickly and easily from the vibration level meter. waveforms can be checked using the AC monitor output.
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 700-SB ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features ± 10 V voltage output
More informationAMM-1022 Digital Multimeter USER`S MANUAL
Digital Multimeter USER`S MANUAL www.tmatlantic.com CONTENTS 1. SAFETY INFORMATION.3 2. DESCRIPTION..6 3. SPECIFICATIONS.8 4. OPERATING INSTRUCTION..11 4.1 Voltage measurement...11 4.2 Current measurement
More informationDIGIT & POINTER MULTIMETER
CONTENTS DIGIT & POINTER MULTIMETER OPERATOR S MANUAL 1. SAFETY INFORMATION 1 1.1 PRELIMINARY 1 1.2 DURING USE 2 1.3 SYMBOLS 3 1.4 MAINTENANCE 3 2. DESCRIPTION 4 2.1 NAMES OF COMPONENTS 4 2.2 FUNCTION
More information