Airmux-400 Broadband Wireless Multiplexer (Ver )

Transcription

1 Data Sheet For North America Only Airmux-400 Broadband Wireless Multiplexer (Ver ) Cost-effective multiple point-to-point encrypted broadband wireless multiplexer Point-to-point and multiple point-to-point broadband radio solution for Ethernet and TDM traffic over license-free frequencies Net throughput of up to 100 Mbps full duplex (200 Mbps aggregated) T1/E1 and Ethernet services on a single platform with transmission range of up to 75 miles (120 km) Multiband operation over 2.4, 4.9 and GHz frequencies High reliability and availability based on robust air interface protocol Airmux-400 is a carrier-class, cost-effective multiple point-to-point broadband wireless transmission device. It combines legacy TDM and Ethernet services for transmission over 2.4, 4.9 and GHz bands, and is suitable for deployment in FCC and ICregulated countries. The Access Company

2 Airmux-400 Broadband Wireless Multiplexer For the global markets of cellular backhaul, WiMAX and ISP backhaul, broadband access, large private and government networks, Airmux-400 offers high throughput, longer range and robustness at a competitive price. MARKET SEGMENTS AND TYPICAL APPLICATIONS Most common wireless applications are described below. Service Providers and ISPs IP backhaul of 4G/broadband services in point-to-multipoint topologies to offer broadband access for remote, rural and underserved communities: nlos (no line of sight) in urban environment Long haul in rural setting (Figure ). Access for large corporate clients to eliminate the recurring fee of incumbent leased line services while maintaining a secured dedicated capacity per site. Private Networks High-capacity interbranch connectivity for university campuses, health care organizations, government institutions, large enterprises and public establishments with high traffic requirements (Figure 1). Mobile Carriers Rural-to-urban cellular backhaul, extending mobile reach to rural locations with carrier-grade, long-haul point-to-point T1/E1 and Ethernet services. Backhaul of G traffic in urban environment with easy migration path from converged TDM/IP networks to all-ip networks, such as WiMAX, LTE/4G). Security and Surveillance Aggregation and backhaul of traffic from multiple collocated megapixel video cameras suitable for homeland security applications, municipal safe city projects, border control installations. AIRMUX-400 MODELS The following models with different Ethernet or aggregate throughputs are available: Airmux M 100 Mbps (200 Mbps aggregated) throughput with up to 16 T1/E1s. This model operates in the following modes: Mbps full duplex with 40 MHz channel bandwidth Mbps asymmetric with 10 and 20 MHz channel bandwidths and user-selectable uplink/downlink capacity configuration (50 50% up to 95 5%) Airmux M 50 Mbps (Ethernet and up to 16 T1/E1s) aggregate, symmetric. This model is best suited for combined TDM and IP traffic delivery. Airmux systems are deployed as single or multiple point-to-point collocated links. Transmission range of up to 75 mi (120 km) is attainable with an external antenna. PHYSICAL CONFIGURATIONS Airmux multiplexers consist of an outdoor unit (ODU), an optional external antenna and an indoor unit (IDU) with redundant DC power supplies. The outdoor unit is suitable for mast or wall installation. SUPERIOR SPECTRAL EFFICIENCY Built on advanced MIMO and OFDM technologies, Airmux-400 provides a high-capacity link at channel bandwidth of 10, 20 or 40 MHz (see Table 1). This guarantees a robust air interface able to withstand strong RF interference and harsh ambient conditions. Figure 1. Enterprise Interbranch Connectivity

3 Data Sheet SECURITY Data transmitted over the air interface is encrypted using Advanced Encryption System (AES) with a 128-bit encryption key. QUALITY OF SERVICE When the link quality is low, Airmux-400 automatically searches for a clear channel within a pre-selected list of frequencies. SHORT TIME-TO-SERVICE Because Airmux-400 operates in license-exempt frequencies, it can be deployed in record time, eliminating the costs and delays involved in leasing lines or trenching fiber. HUB SITE SYNCHRONIZATION Hub Site Synchronization (HSS) assists in the collocation of radios by reducing the interference that normally occurs when multiple radios transmit and receive in close proximity to one another. HSS enables a complex radio environment of mixed services (TDM and Ethernet) and channel bandwidth frequencies (10 or 20 MHz). The collocation feature requires ordering the HSS unit as well as its synchronization cables. HSS installations support up to 16 collocated radios. Like any other RF deployment, the wireless operation is highly dependent on factors such as available frequencies, the physical space between radios, other interfering radios, and whether Airmux-400 or Airmux-200 units are used. HSS does not eliminate the need for careful RF planning to ensure the design will work as planned. 1+1 LINK REDUNDANCY The Monitored Hot Standby (MHS) 1+1 link redundancy protects the wireless transmission against equipment failure or air interface loss. Link switchover is performed in less than 50 msec. DIVERSITY With dual bipolar antennas, Airmux-400 links can be configured to transmit the same data through both radios. This adds data transmission integrity under harsh conditions. Figure 2. Providing Urban Broadband Access

4 Airmux-400 Broadband Wireless Multiplexer MANAGEMENT A single SNMP-based network management application (Airmux Manager) is used to control multiple Airmux-400 and Airmux-200 links as a unified network. RADview-EMS, RAD s SNMP-based management software provides access to the Airmux Manager via its topology map. VLAN management allows the separation of user traffic from NMS traffic. The user decides if such a separation is required. Both the headquarters and remote sites are configured with VLAN management. Information on links and management can be collected and analyzed via a single action. The Airmux Manager Spectrum View utility is an RF survey tool enabling the link installation prior to full link service activation. The tool provides comprehensive and clear spectral measurement information for easier, faster and better quality installations. LAN PORTS The IDU-E devices include three LAN ports: two Fast Ethernet UTP (RJ-45) and one SFP slot. When using RAD s MiTOP-E/T, SFPformat TDM pseudowire gateway, Airmux-400 delivers E/T data streams over its wireless link. Specifications RADIO Frequencies and Channel Bandwidths Band [GHz] Regulation FCC/IC: FCC 47CFR, Part 15, Subpart C, FCC 47CFR, Part 15, Subpart E FCC 47CFR, Part 90, Subpart Y RSS-111 IC RSS-210 Throughput Airmux-400/50M (full duplex): Up to 50 Mbps total (Ethernet and up to 16 T1/E1 combined) Airmux-400/100M (full duplex): Up to 100 Mbps total, 200 Mbps aggregated (Ethernet and up to 16 T1/E1 combined) Duplex Technique TDD Transmit Power See Table 2 Bandwidth 10 MHz 20 MHz 40 MHz 5.8 FCC/IC 5.4 FCC/IC Universal 4.9 FCC/IC 2.4 FCC/IC Modulation 2 2 MIMO-OFDM (BPSK, QPSK, 16 QAM, 64 QAM), see Table 2 Error Correction FEC, k = 1/2, 2/, /4, 5/6, see Table 1 Sensitivity See Table 2 (measured at BER <10E-11, 20 MHz) Encryption AES 128 TDM INTERFACE Number of Ports 4, 8 or 16 Type T1/E1 Framing Transparent to framing mode Timing Plesiochronous (independent Tx and Rx timing) Line Code T1: B8ZS, AMI E1: HDB Latency 8 msec Line Impedance T1: 100Ω, balanced E1: 120Ω, balanced Connector RJ-45 Jitter and Wander As per G.82, G.824 Figure. Extending the Reach of Ethernet-Based Services to Rural Locations over PDH Infrastructure

5 Data Sheet LAN INTERFACE Number of Ports Type 2 10/100BaseT, autonegotiation (802.u) 1 SFP Framing/Coding IEEE 802.u Bridging Up to 2048 MAC addresses self-learning Traffic Handling MAC layer bridging, self-learning Latency msec (typical) Line Impedance 100Ω VLAN Support Transparent Connector RJ-45 (10/100BaseT) MANAGEMENT Protocol SNMP, Telnet Interface 10/100BaseT Connector RJ-45 Upgrade Capabilities Local and over-the-air software download SFP PORT Type Fast Ethernet For full details, see the SFP Transceivers data sheet at Note: It is strongly recommended to order this device with original RAD SFPs installed. This will ensure that prior to shipping, RAD has performed comprehensive functional quality tests on the entire assembled unit, including the SFP devices. RAD cannot guarantee full compliance to product specifications for units using non-rad SFPs. For detailed specifications of the SFP transceivers, see the SFP Transceivers data sheet. ANTENNA Polarization Type Dual Characteristics See Table GENERAL Diagnostics Local and remote loopbacks IDU-to-ODU Connection Outdoor Cat.5e cable, 100m (28 ft) max. length Grounding and Lightning Protection Individual grounding for each IDU/ODU Internal arrestors for lightning protection Internal ESD protection circuits over power/telecom lines Optional lightning protection kit Table 1. Radio Link Characteristics Power DC: -20 to -60 VDC via AC/DC converter Power Consumption 5W max (ODU with IDU) Indicators IDU: On (green) IDU is operational On (orange) IDU is being powered up On (red) IDU failure ODU: On (green) ODU-to-IDU link is OK On (red) ODU-to-IDU link is disrupted AIR I/F: On (green) Wireless link is synchronized On (orange) Wireless link is being installed On (red) Wireless link is out of synchronization SVC: On (green) TDM link is synchronized On (orange) Remote alarm or active loopback are detected On (red) Local alarm is detected Off Ethernet-only unit or TDM services are not configured HSS: On (green) The ODU is HSS master, synchronization is OK Blinking (green) The ODU is HSS slave, synchronization is OK On (orange) HSS is operational, but errors detected or no signal exists On (red) HSS is disabled or ODU is disconnected from IDU Rate FEC Max Tx Power Modulation Single Antenna Dual Antenna GHz 2.4 GHz Sensitivity [Mbps] [Mbps] [k = ] [dbm] [dbm] [dbm] BPSK /2-88 QPSK / / QAM / / / QAM / /

6 Airmux-400 Broadband Wireless Multiplexer STBY: On (green) MHS mode is primary, link is active Blinking (green) MHS mode is secondary, link is not active On (orange) MHS mode is secondary, link is active On (red) MHS mode is primary, link is not active Environment Outdoor unit and external antenna: Enclosure: IP67 all-weather case Temperature: -1 to 140 F (-5 to 60 C) Indoor units: Temperature: 2 to 122 F (0 to 50 C) Humidity: Up to 90%, non-condensing Off MHS is disabled LINK: Physical ODU (with integrated antenna): Height: 14.8 in (71 mm) Width: 14.8 in (71 mm) Depth:.6 in (9 mm) Weight 7 lb (.5 kg) IDU: Height: 1.7 in (44 mm) Width: 9. in (27 mm) Depth: 6.5 in (165 mm) Weight 1.1 lb (0.5 kg) On Ethernet link is OK ACT: On Activity is detected on Ethernet link Table. Antenna Options External Integrated Antenna Type Frequency Gain Beam Dimensions Weight Connector [GHz] [dbi] [degrees] [mm] [ft] [kg] [Ib] 4.9x (4.9x GHz) 2 (5.x GHz) x 5.1x Dish Diam. 620 Diam Note: The range depends on the system configuration. For further information, contact the RAD partner nearest you or one of RAD's offices worldwide. Table 4. Airmux Family Product Comparison Features Airmux-400 (Ver ) Airmux-200 (Ver ) Airmux-200 Airmux-200VS Airmux-400/50 Airmux-400/100 Bandwidth (Mbps) 18 5/2 50 total (Ethernet + TDM) 100 total (Ethernet + TDM) Supported services 2 Ethernet + 1, 2, 4 T1/E1 1 Ethernet Ethernet + 4, 8, 16 T1/E1 Ethernet + 4, 8, 16 T1/E1 HSS 1/20 75/120 75/120 Maximum range 50/80 (mi/km)

7 Data Sheet Ordering Name F58F F2458F F49F F2449F Supported Frequencies and Regulations (default frequency is in bold) 5. GHz (FCC/IC, Universal) 5.4 GHz (FCC, IC, Universal) 5.8 GHz (FCC/IC) 5.9 GHz Universal 2.4 GHz FCC/IC 5. GHz (FCC/IC, Universal) 5.4 GHz (FCC, IC, Universal) 5.8 GHz (FCC/IC) 5.9 GHz Universal 4.9 GHz (FCC/IC, Universal) 5. GHz (FCC/IC, Universal) 5.4 GHz (FCC, IC, Universal) 5.8 GHz (FCC/IC) 5.9 GHz Universal 2.4 GHz FCC/IC 4.9 GHz (FCC/IC, Universal) 5. GHz (FCC/IC, Universal) 5.4 GHz (FCC, IC, Universal) 5.8 GHz (FCC/IC) 5.9 GHz Universal Table 4. Operating Frequencies and ODU Models Ordering String (AIRMUX-400/ODU/ ) 50 Mbps 100 Mbps F58F/50M F2458F/50M/EXT F49F/50M F2449F/50M/EXT F24F 2.4 GHz FCC/IC F24F/50M F58F/100M F2458F/100M/EXT F49F/100M F2449F/100M/EXT Ordering strings are red for integrated antennas and blue for external antennas. Notes: 2.4 GHz band supports 50 Mbps full duplex throughput only. 4.9 GHz FCC band supports 100 Mbps asymmetric throughput only.

8 Airmux-400 Broadband Wireless Multiplexer Data Sheet Ordering Airmux-400/IDUE/* Indoor unit with redundant DC power supplies Airmux-400/POE/a Power-over-Ethernet (POE) device Note: A POE device eliminates the need for ordering an IDU-E. It requires connection via the power adapter. See the Optional Accessories section. Airmux-400/ODU/#/+ Outdoor unit with integrated antenna Airmux-400/ODU/@/+/EXT Outdoor unit for external antenna connection * IDU-E interface: 4TDM 4 TDM ports, Ethernet ports (2 UTP + 1 SFP) 8TDM 8 TDM ports, Ethernet ports (2 UTP + 1 SFP) 16TDM 16 TDM ports, Ethernet ports (2 UTP + 1 SFP) ETH Ethernet ports (2 UTP + 1 SFP) # Frequency band and regulation: F24F 2.4 GHz, FCC/IC, for models with 50-Mbps Ethernet throughput only F49F 4.9 GHz, 5.x GHz (default 4.9 GHz FCC/IC) F58F 5.x GHz (default 5.8 GHz Frequency band and regulation: F2449F 2.x GHz, 4.9 GHz, 5.x GHz (default 4.9 GHz FCC/IC) F2458F 2.x GHz, 5.x GHz (default 5.8 GHz FCC/IC) + Ethernet throughput: 50M 50 Mbps 100M 100 Mbps Notes: 2.4 GHz band supports 50 Mbps full duplex throughput only 4.9 GHz FCC band supports 100 Mbps asymmetric throughput only. OPTIONAL ACCESSORIES Airmux-400/ANT/$ External antenna with 1m (. ft) cable $ External antenna: 19/2427/fp 19 dbi, GHz, flat panel 22/4451/fp 22 dbi, GHz, flat panel 22/5760/fp 22 dbi, GHz, flat panel 2/4958/fp 2 dbi, GHz, flat panel 2/5160/fp 2 dbi, GHz, flat panel 28/5260/dish 28 dbi, GHz, dish CBL-Airmux-UTP/@ Assembled cable for connection between IDU and Cable length: 25 25m (82 ft) 50 50m (164 ft) 75 75m (246 ft) m (28 ft) Airmux-PS-E-AC/a Power adapter for IDU-E, VAC to 48 VDC a AC adapter plug: ACEU European ACUS US ACOC Open-ended Airmux-HSSU Hub site sync unit to connect 8 collocated outdoor units and 2 additional HSS units CBL-HSS/@@ Assembled cable for HSS Cable length: 5 5m (16.4 ft) 15 15m (49.2 ft) 50 50m (164 ft) m (28 ft) MHS-kit Cable and patch panel assembly (8 RJ-45 Y-connections) for Monitored Hot Standby configuration Airmux-Lightning-Protection External lightning protection kit for IDU, PoE unit and ODU /10 (2.4.50) Specifications are subject to change without prior notice RAD Data Communications Ltd. The RAD name, logo, logotype, and the terms EtherAccess, TDMoIP and TDMoIP Driven, and the product names Optimux and IPmux, are registered trademarks of RAD Data Communications Ltd. All other trademarks are the property of their respective holders. International Headquarters 24 Raoul Wallenberg Street Tel Aviv 69719, Israel Tel Fax , market@rad.com North America Headquarters 900 Corporate Drive Mahwah, NJ 0740 USA Tel Toll free Fax market@rad.com Order this publication by Catalog No The Access Company