VI-HAM TM, VE-HAM TM Harmonic Attenuation Module (Compatible with VI-26x and VI-J6x modules)
|
|
- Dominick Maxwell
- 5 years ago
- Views:
Transcription
1 Features Unity power factor Safety agency approvals: CE marked, ctüvus, curus Meets IEC for line Current harmonic content Reduces peak and RMS line currents Universal input: Vac: 50/60 Hz Up to 600 W of power Power density up to 100 W/in 3 Adaptive output voltage control Short-circuit protection Input surge current limiting Converter enable Power OK output Efficiency: 90-94% typical RoHS compliant Data Sheet VI-HAM TM, VE-HAM TM Harmonic Attenuation Module (Compatible with VI-26x and VI-J6x modules) 4.6 x 2.4 x 0.5 in (116,8 x 61,0 x 12,7 mm) Product Highlights The Harmonic Attenuator Module (HAM) accepts an input of Vac. It provides a DC output compatible with Vicor s VI-26x, VI-J6x and user-defined Maxi, Mini and Micro DC-DC converters. The combination of a HAM, one or more Vicor DC-DC converters, and the line filter, listed on page 8, offers a high density power solution meeting EN Absolute Maximum Ratings Parameter Rating Unit Notes L to N voltage 265 Vac Continuous 280 Vac 100 ms Mounting torque 5 (0.57) in- lbs (N-m) # 6-32 or m3.5 Pin soldering temperature 750 F (400) ( C) Operating temperature 55 to +85 C M-Grade Storage temperature 65 to +100 C M-Grade Auxiliary output 3 ma Note: High Boost Ham recomended for new designs (VI-HAM-xL) Part Numbering VI - HAM - C M RoHS Designator VI = Non RoHS Compliant VE = RoHS Compliant Product Type HAM = Hamonic Attenuator Module HAMD = Hamonic Attenuator Module Driver BAMD = Hamonic Attenuator Module Booster Product GradeTemperatures ( C) Grade Operating Storage E = 10 to to +100 C = 25 to to +100 I = 40 to to +100 M = 55 to to +100 Output M = 600 W For application information please see the Design Guide at vicorpower.com. (HAMD and BAMD can be used in parallel or in arrays for applications that require more power than that available from a single HAM) Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev. 2.2 Page 1 of 10
2 ELECTRICAL CHARACTERISTICS Electrical characteristics apply over the specified operating voltage range, output load and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature of the baseplate. Specifications apply for AC mains having no more than 5% total harmonic distortion. INPUT SPECIFICATIONS (HAM-xM, HAMD-xM, BAMD-xM) Parameter Min Typ Max Unit Notes Operating input voltage HAM, HAMD, BAMD Vac Rectified AC for HAMD, BAMD AC line frequency Hz Unit will operate at 400 Hz but may not meet PF or THD specs Power factor /230 Vac, % of full load Total harmonic distortion 7.5 % 115 Vac, sinusoidal input, full load (line current) 8.5 % 230 Vac, sinusoidal input, full load Inrush current 20 Amps 230 Vac, full load 13 Amps 115 Vac, full load CM Filter Inductance 3 6 mh External to HAM module (see Fig. 10) DM Filter Inductance mh External to HAM module (see Fig. 10) OUTPUT SPECIFICATIONS Parameter Min Typ Max Unit Notes Maximum output power 600 Watts See power derating graph, Fig. 3 Output voltage Efficiency Vdc 115 Vac In Vdc 230 Vac In (see Fig. 3) % 115 Vac, sinusoidal input, full load % 230 Vac, sinusoidal input, full load External hold up capacitance 500 3,000 µf per HAM 300 W, 500 µf minimum, external to HAM 600 W, 1,000 µf minimum, external to HAM Includes external rectifier loss for HAMD and BAMD Ride through / hold up time 16 ms 600 W output with 1,000 µf hold up capacitor, external to HAM 7 10 Vp-p 115 Vac, full load, 1,000 µf hold up capacitor, external to HAM Ripple 5 6 Vp-p 230 Vac, full load, 1,000 µf hold up capacitor, external to HAM Short circuit shut down current 100 ma Foldback current limiting CONTROL SPECIFICATIONS Parameter Min Typ Max Unit Notes Power OK threshold 230 Vdc Module enable/ disable threshold Auxiliary output 240 Vdc Vdc 3 ma 3 ma Do not overload or add external capacitance ELECTROMAGNETIC COMPATIBILITY Parameter Standard Notes Transient / surge immunity EN kv L-N, 2 kv L-PE, filter and MOV Line disturbance / immunity EN Main s interruption or brown out Flicker / inrush EN A peak inrush at 230 Vac input Harmonic current EN % THD Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev. 2.2 Page 2 of 10
3 ELECTRICAL CHARACTERISTICS (CONT.) SAFETY SPECIFICATIONS Parameter Min Typ Max Unit Notes Isolation (in to out) None Isolation provided by DC-DC converters Dielectric withstand (I/O to baseplate) 2,121 Vdc Baseplate earthed Capacitance 150 pf Input to baseplate AGENCY APPROVALS Safety Standards Markings Notes UL , EN , CSA ctüvus, curus CE Marked Low Voltage Directive GENERAL SPECIFICATIONS Parameter Min Typ Max Unit Notes Size 4.6 x 2.4 x 0.5 in (116,8 x 61,0 x 12,7) (mm) Weight 6.4 (180) oz (g) Pin material Cover material Solder plate over copper alloy GE ULtem 2100 black #7310 UL94-VO rated Thermal shut down C Baseplate temperature MTBF HAM 420,000 hrs GB, 25 C HAMD 424,000 hrs GB, 25 C BAMD 818,000 hrs GB, 25 C Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev. 2.2 Page 3 of 10
4 TECHNICAL DESCRIPTION The HAM Figure 1, consists of a full-wave rectifier, a high-frequency zero-current switching (ZCS) boost converter, active inrush current limiting, short-circuit protection, control and housekeeping circuitry. The incoming AC line is rectified and fed to the boost converter. The control circuitry varies the operating frequency of the boost converter to maintain the output voltage of the HAM above the peak of the incoming line, while forcing the input current to follow the waveshape and phase of the line voltage. The AC input current follows the voltage waveform and a power factor better than 0.99 is achieved. Operating efficiency of the boost converter is optimized at any incoming line voltage by an adaptive output voltage control scheme. The output voltage of the HAM varies as a function of incoming AC line voltage, Figure 3. On a nominal 120 Vac line the output voltage of the HAM is 260 Vdc well within the input operating voltage range of Vicor VI-26x and VI-J6x converters. As input line increases, so does the HAM output voltage; at 220 Vac the delivered voltage will be about 350 V. For any given input line voltage, the HAM maintains enough headroom between the output voltage and peak input voltage to ensure high quality active power factor correction without unnecessarily sacrificing operating efficiency. AC Line Rectifier ZCS Boost Converter Inrush & Short Circuit Protection DC Out + Voltage Waveform Current Sense Control & Housekeeping Circuitry High Frequency Control Output Voltage Module Enable Power OK Note: Non-Isolated Output Gate In Gate Out NOTE: No input to output isolation. Aux. Supply Without PFC With PFC Figure 1 HAM block diagram Figure 2 Input voltage and current wave forms, with and without power factor correction Output Power (W) derate output power 8 W/V for Vin <110 Vac Output Voltage (Vdc) Vac Input Voltage VRMS Rated Output Power Output Voltage Figure 3 Output voltage and power rating versus input voltage Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev. 2.2 Page 4 of 10
5 F3 VI-26x or VI-J6x DC-DC Converters Input V1 C5 GND Vicor Line Filter P/N A VI-HAM-xM + OUT OUT R1 D1 C1 D2 C2 F1 D4 C9 Driver LINE LOAD C6 Y-Capacitor Component Description Vicor Designation Part Number C1 0.1 µf ceramic, 50 V C2, C µf ceramic, 50 V C4 Hold up capacitor, Available as a HUB 500 to 3,000 µf from Vicor (see adjoining table) R1 50 KΩ C9, C µf to 500 V R4* 100 KΩ, 2 W D1 1N4691 zener, 6.2 V D2, D3 1N4006 diode, 800 V D4, D5 1N5817 schottky diode, 20V V1 275 V MOV C5 C8 4,700 pf Y2 cap F1, F2 Use recommended fusing for specific DC-DC Converters F3 10 A, 250 V µ µ µ Hold up Box (HUB) C4 R4* D3 C3 D5 F2 C10 C7 C8 Y-Capacitor * A 100 K, 2 Watt resistor is used for every 1,000 µf of hold up capacitance. Driver Figure 4 Connection diagram HAM / DC-DC converters PIN FUNCTION / DESCRIPTION and (HAM) An appropriate line filter is required to limit conducted emissions and ensure reliable operation of the HAM, see page 8. Connect single phase AC mains to the input of the line filter via a 10 A, 250 V fuse. Connect the output of the filter to and of the HAM. Do not put an X-capacitor across the input of the HAM or use a line filter with an X-capacitor on its output as power factor correction may be impacted., IN (HAMD, BAMD) These pins are connected to the output of the external bridge rectifier in HAMD / BAMD configurations Figure 5. (HAM) The user should not make any connection to this pin. (HAMD) This pin provides line voltage envelope and phase information for power factor correction. This connection must be made through the synchronization diodes between the line filter and bridge rectifier Figure 5. (BAMD) The Gate In pin is an interface pin to the Gate Out pin of a HAMD or BAMD depending on configuration. The user should not make any other connection to this pin. The Gate Out pin is a synchronization pin for HAMD/BAMD arrays; the user should not make any other connection to this pin. and -OUT Connect the of the HAM to the of the respective Vicor DC-DC converters with the recommended fuse. Connect the -OUT of the HAM to the of the converters. In addition, an external hold-up capacitor of 1,000 µf with a minimum voltage rating of 450 Vdc, is required (across the output of the HAM) for 16 ms ride through time at full power (500 µf for half power, etc). This capacitor must be in close proximity to the HAM. Do not exceed 3,000 µf of total output capacitance. Lower values of capacitance may be used for reduced hold up requirements, but not less than 500 µf. Lower capacitance values may degrade power factor specifications. Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev. 2.2 Page 5 of 10
6 VI-26x or VI-J6x DC-DC Converters 10 A F1 C5 Input F3 V1 GND JMK Filter P/N A* 1N4006 1N4006 Bridge Rectifier Vicor P/N Z1 Z2 Z3 10 A VI-HAMD-xM -OUT R1 D1 D2 C1 C2 F2 C9 D4 C6 C7 Driver Component Description Vicor Designation Part Number C1 0.1 μf ceramic, 50 V C2, C μf ceramic, 50 V C4 Hold up capacitor, Available as a HUB 1000 to 6,000 μf from Vicor (see adjoining table) C5 C8 4,700 pf Y2 cap C9,C μf, 500 V Film or Ceramic D1 1N4691 zener, 6.2 V D2, D3 1N4006 diode, 800 V D4, D5 1N5817 schottky diode, 20 V F1, F2 Use recommended fusing for specific DC-DC Converters F3 20 A, 250 V R1 50 KΩ R4** 100 KΩ, 2 W V1 275 V MOV Z1, Z2 130 V Transorb 1.5KE130CA Z3 150 V Transorb 1.5KE150CA Hold up Box (HUB) 2000 μf HUB1000-P 1200 W VI-BAMD-xM -OUT C4 R4** * Consult Vicor's Applications Engineering for specific HAMD / BAMD filtering information. ** A 100 KΩ, 2 W resistor is used for every 1,000 μf of hold up capacitance. C10 Booster (N) C8 Figure 5 Connection Diagram, HAMD / BAMD / VI-26x or VI-J6x DC-DC Converters HAMD-CM Driver HAM: No internal bridge rectifier or synchronization diodes. BAMD-CM Booster HAM: Companion module to HAMD-CM used for additional output power. No internal bridge rectifier. PIN FUNCTION / DESCRIPTION (CONT.) The HAM provides a low voltage non isolated output Auxiliary Supply () that may be used to power primary side control and monitoring circuitry. This output is Vdc, referenced to -OUT, at 3 ma max. Do not overload or short this output as the HAM will fail. A typical use for is to power an optical coupler that isolates the Power OK signal Figure 6. The Enable Output () is used to inhibit the DC-DC converters at start up until the hold up capacitors are charged, at which time Enable is asserted high (open state, Figure 8). If the AC line fails, goes low when the DC output of the HAM drops below 195 Vdc V + DO NOT OVERLOAD or directly connect a capacitor to the terminal. I AS 3 ma "Power OK" Status Low = OK 18 kω, 1/4 W must be connected to the Gate Input of all VI-26x and VI-J6x drivers Figure 4; failure to do so may cause the converters to toggle on and off. It is not necessary to connect this pin to boosters as they are controlled by their respective driver. If an external load is connected directly to the output of the HAM, do not apply the load until the output hold up capacitor(s) are fully charged. Figure 6 Auxiliary Supply () The pin ancillary circuitry illustrated in Figures 4 and 5 provides transient immunity. The illustrated circuitry is the minimum required, see Figures 4 and 5. Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev. 2.2 Page 6 of 10
7 PIN FUNCTION / DESCRIPTION (CONT.) Power OK is a monitor signal that indicates the status of the AC mains and the DC output voltage of the HAM. is asserted (active low) when the output bus voltage is within normal operating range ms after DC-DC converters are enabled by the signal of the HAM. This provides sufficient time for the converters to turn on and their output(s) to stabilize prior to being asserted, Figure 9. For momentary interruptions of AC power, the HAM will provide at least 16 ms of ride through or hold up time (with 1,000 µf output capacitor). On loss of power or brownout, (when the HAM output voltage drops below 230 Vdc) the signal will go to an open circuit state, see Figure 7, signaling an impending loss of input power to the converter modules. will provide power fail warning at least 1 ms prior to converter shut down. When the HAM output voltage drops below 195 Vdc the converters are disabled via Enable Output (). D AC Mains 120 Vrms LOGIC G S DC Output of HAM 240 Vdc Boost Voltage 230 Vdc Rectified Line 195 Vdc Figure 7 Power OK () Enable Output () Off at 195 Vdc 25 ms Power OK () Off at 230 Vdc LOGIC G D S Outputs DC-DC Converter(s) 10 ms Off below 195 Vdc Figure 8 Enable / Output () Figure 9 Start up / shut down timing diagram Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev. 2.2 Page 7 of 10
8 PIN FUNCTION / DESCRIPTION (CONT.) Line Filter for HAM A line filter is required to provide attenuation of conducted emissions generated by the HAM module and to protect it from line transients. It also presents a well defined high frequency AC line impedance to the input of the HAM. To meet the listed specifications, Vicor s P/N line filter/transient suppressor or equivalent must be used, see Figure 10. The addition of a MOV external to this filter is required to meet normal mode transient surge requirements. 2.40± LINE 4-40 INSERT 0.25 DP 4 PL 4.60 ± ±0.02 LOAD ±0.02 ø0.080 PIN 6 PLACES FACE MAY BE BOWED 0.04 MAX 0.13 ± MAX MOV* P/N LINE LD LC C y x C y D1 D2 D3 LOAD Figure 11 HAM filter #30205 mechanical diagram HAM Filter P/N Cx = 1.5 uf(x2)sh Cy = 0.01 uf, Y2 type LC = 6.9 mh LD = 0.72 mh R = 235 KΩ D1,2 = 1.5KE130CA D3 = 1.5KE150CA *MOV required external to filter to meet normal mode transient surge requirements Figure 10 Required HAM filter, Vicor part # For applications using HAMD + BAMD or where the user desires to construct a custom HAM filter, the filter should be designed following Figure 10, the schematic of Vicor s P/N filter. The current carrying capability of the inductors must be scaled proportionally to the number of HAM modules used. Inductance values must be selected according to Table 1. These limits are to ensure proper operation of the HAM and do not guarantee a system will meet conducted emissions specifications. Parameter Min Typ Max Unit Differential Mode Inductance (LD) mh Common Mode Inductance (LC) 3 6 mh Table 1 HAM filter inductance range For applications requiring magnetic field shielding, do not place a ferrous EMI shield over the plastic cover of the HAM module. This can cause thermal problems due to induction heating effects. RATED CURRENT VS AMBIENT TEMPERATURE 90 OPERATING TEMP (DEG C) CURRENT (AMPS) Figure 12 HAM filter #30205 current rating vs. temperature INSERTION LOSS (db) DM CM FREQUENCY (MEGAHERTZ) Figure 13 HAM filter #30205 insertion loss vs. frequency Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev. 2.2 Page 8 of 10
9 PIN FUNCTION / DESCRIPTION (CONT.) Parameter Min Typ Max Unit Operating voltage Vac Operating temperature (See Fig.12) C Leakage current at 264 Vac, 63 Hz (Either line to earth) 1.2 ma Operating current 6.3 A Dielectric withstand (line case) 1500 Vac Residual voltage after 1 sec. 34 V Operating frequency Hz Agency Approvals UL, CSA, TÜV Table 2 HAM filter part #30205 specifications Safety Notes Each HAM, HAMD or BAMD module must be preceded by a safety agency recognized fast-blow 10A 3AG fuse. The HAM is not isolated from the line either input or output; a line isolation transformer must be used when making scope measurements. HAMs do not provide input to output isolation. Differential probes should be used when probing the input and output simultaneously to avoid destructive ground loops. Protective Features Over Temperature Shut Down The HAM is designed to shut down when the temperature of the baseplate exceeds 90 C. Do not operate the HAM above its maximum operating temperature of 85 C. Short Circuit Protection The HAM contains output short circuit protection. Operation of this function does not clear the input fuse and the output will resume normal operation after removal of the fault. A short period of time may be required to allow for cooling of an internal temperature sensor. Output Over Voltage Protection The HAM contains output over voltage protection. In the event the output voltage exceeds approximately 420 Vdc, the boost will decrease to maintain 420 Vdc on the output. When the peak of the AC line exceeds 420 V (approximately 293 Vac) the boost will have been reduced to zero and the line will be pulled low shutting down the converters. Beyond this the protection circuit will be enabled and the output voltage will decrease. MECHANICAL DRAWING 0.30±.015 (7,6)±(0,38) 2.10 (53,3) 0.50 (12,7) (45,7) 4.60 (116,8) 3.60 (91,4) HAM (2,0) Dia. (2) places (35,6) 0.70 (25,4) 0.40 (17,8) (10,2).35±.015 (8,9)±(0,38) Pin # HAM HAMD IN BAMD IN N/C N/C 4.20 (106,7) 0.30 (7,6) Min 2.40 (61,0) 1.75 (44,5) Aluminum Base 0.20 (5,08) MIN 0.29 (7,36) MAX 0.15 (3,8) 0.15 (3,8) FULL R Product ID this surface Figure 14 HAM / HAMD / BAMD Module Outline (1,0) Dia (7) places 0.12 (3,0) 0.50 (12,7) (0,76) (0).01 Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev. 2.2 Page 9 of 10
10 Warranty Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or maintenance. Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original purchaser only. EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the product to the factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty. Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability, function, or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither does it convey any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of its components in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor Terms and Conditions of Sale, the user of Vicor components in life support applications assumes all risks of such use and indemnifies Vicor against all damages. Vicor s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom power systems. Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or malfunction could result in injury or death. All sales are subject to Vicor s Terms and Conditions of Sale, which are available upon request. Specifications are subject to change without notice. Intellectual Property Notice Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual Property Department. Vicor Corporation 25 Frontage Road Andover, MA, USA Tel: Fax: Customer Service: custserv@vicorpower.com Technical Support: apps@vicorpower.com Vicor Corp. Tel: , Fax: HAM, Harmonic Attenuation Module Rev /10
10. High Boost HAM. Maxi, Mini, Micro Design Guide Rev 4.9 vicorpower.com
THE HIGH-BOOST HARMONIC ATTENUATOR MODULE COMPATIBLE WITH V375, VI-26x AND VI-J6x FAMILIES The High-Boost Harmonic Attenuation Module (HAM) consists of a full-wave rectifier, a high-frequency zerocurrent-switching
More informationNot Recommneded for New Designs
Actual Size: 4.6 x 2.4 x 0.5in (116,8 x 61,0 x 12,7mm) VI-HAM, VE-HAM (Compatible with VI-26x and VI-J6x modules) C US C NRTL US Harmonic Attenuation Module S Features & Benefits Unity power factor Safety
More information10. High-Boost HAM. Design Guide & Applications Manual. Maxi, Mini, Micro Family DC-DC Converters and Configurable Power Supplies
The High-Boost Harmonic Attenuator Module Compatible with V375, VI-26x and VI-J6x Families The High-Boost Harmonic Attenuation Module (HAM) consists of a full-wave rectifier, a high-frequency zero-current
More informationVI-HAM, VE-HAM VxHAMxM (Compatible with VI-26x and VI-J6x modules)
Actual Size: 4.6 x 2.4 x 0.5 in (116,8 x 61,0 x 12,7 mm) VI-HAM, VE-HAM VxHAMxM (Compatible with VI-26x and VI-J6x modules) C US S C NRTL US Harmonic Attenuation Module Features Unity power factor Safety
More informationVI-HAM, VE-HAM VxHAMxL
VI-HAM, VE-HAM VxHAMxL Actual Size: 4.6 x 2.4 x 0.5in (116,8 x 61,0 x 12,7mm) C US C NRTL US S High-Boost Harmonic Attenuation Module Features & Benefits 675 Watts output power Unity power factor 85 264V
More informationVI-HAM. Harmonic Attenuator Modules. Unity Power Factor. Features. Inrush & Short Circuit Protection. ZCS Boost Converter.
VI-HAM Harmonic Attenuator Modules Features Unity Power Factor Safety Agency Approvals: UL, CSA, TÜV, BABT Meets IEC 6100-3-2 for Line Current Harmonic Content Reduces Peak and RMS Line Currents Universal
More informationBCM Array TM BC384R120T030VM-00
BCM Array TM BC384R120T030VM-00 Features 384 V to 12 V VI BRICK BCM Array 300 Watt (450 Watt for 1 ms) Vertical mount package reduces footprint Integrated heat sink simplifies thermal management ZVS /
More informationData Sheet 24V Input Maxi Family DC-DC Converter Module
Data Sheet 24V Input Maxi Family DC-DC Converter Module Features RoHS Compliant (with F or G pin option) DC input range: 18 36 V Input surge withstand: 50 V for 100 ms DC output: 3.3 48 V Programmable
More informationNot Recommended for New Designs
Not Recommended for New Designs B048F030T21 B048F030M21 BCM TM Bus Converter 48 V to 3 V V I Chip Bus Converter 210 Watt (315 Watt for 1 ms) High density 237 A/in 3 Small footprint 60 A/in 2 Low weight
More informationDC-DC Converter Module
Features DC input range: 27-56 V Input surge withstand: 105 V for 100 ms DC output: 13.4 V Programmable output: 10 to 110% Regulation: ±0.2% no load to full load Efficiency: 88.5% Maximum operating temperature:
More informationEOL - Not Recommended for New Designs; Alternate Solution is B384F120T C baseplate operation. 384 V to 12 V Bus Converter
BCM Bus Converter Advanced Sine Amplitude Converter (SAC ) Technology Size: 1.91 x 1.09 x 0.37 in 48,6 x 27,7 x 9,5 mm Features 100 C baseplate operation 384 V to 12 V Bus Converter 300 Watt ( 450 Watt
More informationPRM P048F048T24AL. V I Chip TM. PRM-AL Pre-Regulator Module PRELIMINARY. Absolute Maximum Ratings. Product Description.
PRM P048F048T24AL V I Chip PRM-AL Pre-Regulator Module 48 V input V I Chip PRM Adaptive Loop feedback Vin range 36 75 Vdc High density 830 W/in 3 Small footprint 215 W/in 2 Low weight 0.5 oz (14 g) ZVS
More informationVTM VTM TM Transformer
VTM VTM TM Transformer V048F480T006 V048F480M006 48 V to 48 V V I Chip TM Converter 6.3 A (9.4 A for 1 ms) High density 1017 W/in 3 Small footprint 260 W/in 2 Low weight 0.5 oz (15 g) Pick & Place / SMD
More information4:1 Intermediate Bus Converter Module: Up to 650 W Output IB054Q120T53N1-00
4:1 Intermediate Bus Converter Module: Up to 650 W Output IB054Q120T53N1-00 Features Input: 36 60 Vdc Output: 12 Vdc at 48 Vin Output current: up to 53 A 98% peak efficiency Low profile: 0.41 height above
More informationEnd of Life. 100 C baseplate operation. Vin range: Vdc. Factorized Power. High density: up to 156 W/in 3. Small footprint: 2.
PRM TM Regulator Features Size: 1.91 x 1.09 x 0.37 in 48,6 x 27,7 x 9,5 mm 100 C baseplate operation Vin range: 18 60 Vdc Factorized Power High density: up to 156 W/in 3 Small footprint: 2.08 in 2 Height
More informationVTM VTM TM Current Multiplier
V V Current Multiplier 48 V to 12 V V I Chip Converter 25 A (37.5 A for 1 ms) High density 1036 W/in 3 Small footprint 260 W/in 2 Low weight 0.5 oz (15 g) Pick & Place / SMD or Through hole 125 C operation
More informationPRM Regulator PR048A480T024FP
PRM Regulator Pre-Regulator Module Features Size: 1.91 x 1.09 x 0.37 in 48,6 x 27,7 x 9,5 mm 100 C baseplate operation Vin range: 36 75 Vdc Factorized Power High density: up to 312 W/in 3 Small footprint:
More information7A V I Chip EMI Filter SIP. Features:
QUIETPOWER 7A V I Chip EMI Filter SIP Description: The EMI filter is specifically designed to attenuate conducted common-mode (CM) and differential-mode (DM) noise of Vicor s V I Chip PRM/VTM factorized
More informationIntermediate Bus Converters Quarter-Brick, 48 Vin Family
PRELIMINARY 45 V I Chip TM VIC-in-a-Brick Features Up to 600 W 95% efficiency @ 3 Vdc 600 W @ 55ºC, 400 LFM 125 C operating temperature 400 W/in 3 power density 38-55 Vdc input range 100 V input surge
More informationPI2161-EVAL1 60V/12A High Side High Voltage Load Disconnect Switch Evaluation Board User Guide
PI2161-EVAL1 Series PI2161-EVAL1 60V/12A High Side High Voltage Load Disconnect Switch Evaluation Board User Guide Content Page Introduction... 1 Product Description... 2 Schematic.... 2 Bill of Materials...
More informationPI2007-EVAL2 Cool-ORing Series
PI2007-EVAL2 Cool-ORing Series PI2007-EVAL2 12V/15A High Side Active ORing Evaluation Board User Guide Content Page Cool-ORing Series Introduction... 1 Product Description... 2 Schematic... 3 Bill of Material...
More informationPFC-600LF UNIVERTER LF Series
. Tel: (8) 964-6 35 Hampden Road Fax: (8) 339-375 PFC-LF UNIVERTER LF Series Watt PFC Front End Full Brick The UniVerter PFC-LF module accepts 85-265 Vac input and converts it to 375 Vdc to power isolated
More informationMicro Family 28 V Wide Input
Micro Family 28 V Wide Input Actual size: 2.28 x 1.45 x 0.5 in 57,9 x 36,8 x 12,7 mm C US C S NRTL US DC-DC Converter Module Features DC input range: 9-36 V* Isolated output Input surge withstand: 50 V
More informationCool-ORing PI2007 Product Description
PI2007-EVAL1 Cool-ORing Series PI2007-EVAL1 48V Bus High Side Active ORing Evaluation Board User Guide Content Page Cool-ORing Series Introduction... 1 Product Description... 2 Schematic... 3 Bill of Material...
More informationVTM Current Multiplier
VTM Current Multiplier S C NRTL US Voltage Transformation Module Features Size: 1.91 x 1.09 x 0.37 in 48,6 x 27,7 x 9,5 mm Applications 100 C baseplate operation 48 V to 16 V Converter 15 A ( 22.5 A for
More informationBCM Bus Converter B048F160T24 B 048 F 160 M 24
BCM Bus Converter B 048 F 160 M 24 S C NRTL US Narrow Input Range Sine Amplitude Converter 48 V to 16 V VI Chip Bus Converter 240 Watt ( 360 Watt for 1 ms) High density 813 W /in 3 Small footprint 210
More informationVIM Series. 90 & 60 W, Efficient, CV Class 2 LED Drivers ORDERING INFORMATION
060W-12 100W-24 Nominal Input Voltage 90 &, Efficient, CV Class 2 Max. Output Power Nominal Output Voltage Max. Output Current 120 & 277 Vac 12, 24 Vdc 5, 3.75 A Efficiency up to 90% typical Max. Case
More informationAmerican Power Design, Inc.
, Inc. FEATURES 4 Customer Selects Output Voltage 4 Ultra Wide Input Ranges (936Vdc, 2060Vdc) 4 Efficiency 89% (typ.) 4 Independently Isolated Outputs 4 SixSided Shielded Case 4 Remote On/Off Control 4
More informationVGM Series. 100 & 60 W, Efficient, CV Class 2 LED Drivers for Signage Applications ORDERING INFORMATION
Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current 120/277 Vac 12, 24, Vdc 5, 3.92 A Efficiency up to 90% typical Max. Case Temperature 100 C (measured at the hot spot)
More informationMini Family 110 V Input
Mini Family Actual size: 2.28 x 2.2 x 0.5 in 57,9 x 55,9 x 12,7 mm C US C S NRTL US DC-DC Converter Module Features DC input range: 66 154 V (continuous) Isolated input Encapsulated circuitry for shock
More informationMicro Family 24 V Input
Micro Family 24 V Input Actual size: 2.28 x 1.45 x 0.5 in 57,9 x 36,8 x 12,7 mm C US C S NRTL US DC-DC Converter Module Features DC input range: 18-36 V Isolated output Operation to 16 V at 75% power after
More informationVLM60/40 Series. 60 & 40 W, Efficient, Compact Constant Voltage Class 2 LED Drivers
/40 Nominal Input Voltage 120/277 Vac, 220 to 240 Vac Max. Output Power Nominal Output Voltage Max. Output Current 12, 24, 48 Vdc 5, 2.5, 1.25 A Efficiency up to 90% typical Max. Case Temperature 90 C
More informationBCM Array TM BC352R440T033VM-00
BCM Array TM BC352R440T033VM-00 Features 352 Vdc 44 Vdc 325 W VI BRICK TM BCM Array Integrated heatsink simplifies thermal management Vertical mount package reduces footprint High efficiency (>95%) reduces
More informationVI-ARM Autoranging Rectifier Module
16 VI-ARM Autoranging Rectifier Module Overview The VI-ARM (Autoranging Rectifier Module) provides an effective solution for the AC front end of a power supply built with Vicor DC-DC converters. This high
More informationVTM Current Multiplier V048F080T030 V 048 F 080 M 030
VTM Current Multiplier V 048 F 080 M 030 S C NRTL US High Efficiency, Sine Amplitude Converter 48 V to 8 V VI Chip Converter 30 A ( 45.0 A for 1 ms) High density 813 W /in 3 Small footprint 210 W /in 2
More informationMicro Family 110 V Input
Micro Family Actual size: 2.28 x 1.45 x 0.5 in 57,9 x 36,8 x 12,7 mm C US C S NRTL US DC-DC Converter Module Features DC input range: 66 154 V (continuous) Isolated output Encapsulated circuitry for shock
More informationPRM Regulator P036F048T12AL
PRM Regulator S C NRTL US Non-isolated Regulator Features 36 V input VI Chip PRM Vin range 18 60 Vdc High density 407 W/in 3 Small footprint 1.1 in 2 Low weight 0.5 oz (15 g) Adaptive Loop feedback ZVS
More informationMicro Family 28V Wide Input
Micro Family 28V Wide Input Actual size: 2.28 x 1.45 x 0.5in 57,9 x 36,8 x 12,7mm S C US C NRTL US DC-DC Converter Module Features & Benefits DC input range: 9 36V* Isolated output Input surge withstand:
More informationIndustrial Applications Telecom Daracom
ABC200 Series is a family of compact and efficient AC-DC power supplies suited for telecom datacom and many other industrial applications. This family meets the international information technology safety
More informationPRM TM Regulator P048F048T24AL P048F048M24AL. End of Life. Product Description. Absolute Maximum Ratings. DC-DC Converter
P048F048T24AL P048F048M24AL PRM TM Regulator 48 V input V I Chip TM PRM Vin range 36 75 Vdc High density 813 W/in 3 Small footprint 215 W/in 2 Low weight 0.5 oz (15 g) Adaptive Loop feedback ZVS buck-boost
More informationTechnical Reference Notes AIT00ZPFC-01NL. AIT00ZPFC 150W AC-DC Converter Module
AIT00ZPFC 150W AC-DC Converter Module The Power Factor Correction module is part of Astec s family of advanced modular power supply components. Featuring high reliability and convenient control and monitoring
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationPRM TM Regulator P045F048T32AL. Not Recommended for New Designs. Absolute Maximum Ratings. Product Description. DC-DC Converter
P045F048T32AL PRM TM Regulator 45 V input V I Chip TM PRM Vin range 38 55 Vdc High density 1084 W/in 3 Small footprint 1.11 in 2 Low weight 0.5 oz (15 g) Adaptive Loop feedback ZVS buck-boost regulator
More informationMaxi Family 375V Input
Maxi Family 375V Input Actual size: 4.6 x 2.2 x 0.5in 117 x 56 x 12,7mm C US C NRTL US DC-DC Converter Module S Features & Benefits DC input range: 250 425V Isolated output Input surge withstand: 500V
More information14 A Active EMI Filter SIP for 48 Vdc Bus. Features: Figure 2 Typical QPI-6 application schematic with a Vicor brick converter.
QUIETPOWER 14 A Active EMI Filter SIP for 48 Vdc Bus Description: The active EMI filter attenuates conducted commonmode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 khz
More informationPI LGIZ. 360μΩ, 5 V/60 A N-Channel MOSFET. μr DS(on) FET Series. Product Description. Features. Applications.
μr DS(on) FET Series PI5101-01-LGIZ 3μΩ, 5 V/ A N-Channel MOSFET Product Description The PI5101μR DS (on) FET solution combines a highperformance 5 V, 3 μω lateral N-Channel MOSFET with a thermally enhanced
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 1000 Vdc 4 Fully Programable Outputs 4 Single and Dual Outputs 4 Wide Input Ranges (10-20Vdc, 18-36Vdc) 4 1000 Vdc Output Isolation 4 Continuous
More informationQPI-5L. 14 Amp Active EMI Filter for 24 V DC Bus. Features. Description. Applications 查询 QPI-5L 供应商. QuietPower
查询 5L 供应商 5L QuietPower 14 Amp Active EMI Filter for 24 V DC Bus Description The 5 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 28 Vdc 4 Wide Input Ranges (10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc) 4 Excellent Line & Load Regulation 4 Low Output Ripple 4 500 Vdc Output Isolation
More information24V Input. Module Family Electrical Characteristics MODULE INPUT SPECIFICATIONS MODULE OUTPUT SPECIFICATIONS THERMAL RESISTANCE AND CAPACITY
Maxi Family 24V Input Actual size: 4.6 x 2.2 x 0.5in 117 x 56 x 12,7mm C US C NRTL US DC-DC Converter Module S Features & Benefits DC input range: 18 36V Isolated output Operation to 16V at 75% power after
More informationLB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
More informationQPI-AN1 GENERAL APPLICATION NOTE QPI FAMILY BUS SUPPLY QPI CONVERTER
QPI-AN1 GENERAL APPLICATION NOTE QPI FAMILY EMI control is a complex design task that is highly dependent on many design elements. Like passive filters, active filters for conducted noise require careful
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
More informationMicro Family 24V Input
Actual size: 2.28 x 1.45 x 0.5in 57,9 x 36,8 x 12,7mm Micro Family 24V Input C US C NRTL US DC-DC Converter Module S Features & Benefits DC input range: 18 36V Isolated output Operation to 16V at 75% power
More informationLDS8710. High Efficiency 10 LED Driver With No External Schottky FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT
High Efficiency 10 LED Driver With No External Schottky FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier*)
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 1000 Vdc 4 Low Profile 4 Single and Dual Outputs 4 Ultra Wide Input Ranges (9-36Vdc, 20-60Vdc, 36-72Vdc) 4 1000 Vdc Output Isolation 4 Continuous
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 28 Vdc 4 Wide Input Ranges (10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc) 4 Excellent Line & Load Regulation 4 500 Vdc Output Isolation 4 Continuous Short
More informationFeatures. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter
Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationPI2003 Series. Universal Active ORing Controller IC. Description. Features. Applications. Package Information. Typical Applications:
Universal Active ORing Controller IC PI2003 Series Description The PI2003 solution is a universal highspeed Active ORing controller IC designed for use with N-channel MOSFETs and is optimized for -48V
More informationMini Family 48V Input
Mini Family 48V Input Actual size: 2.28 x 2.2 x 0.5in 57,9 x 55,9 x 12,7mm C US C NRTL US DC-DC Converter Module S Features & Benefits DC input range: 36 75V Isolated output Input surge withstand: 100V
More informationCLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
More informationSPAC265-8W. AC-DC power supply module. Features. Description. Applications
AC-DC power supply module Datasheet production data Features Open frame switch mode power supply European input voltage range Single output 5 V, 8 W peak power, 4 W continuous operating mode EMC compliance
More informationTB65 65W Single Output Test and Measurement/Industrial Series
Features 2.0 x 3.5 x 1.3 Package TB65 Up to 65W Convection Cooled Output Power Compliant to high levels of EMC per EN61000-4 15kV ESD (Air), 8kV (Contact) 4kV Surge Meets Class B Conducted EMI with 6db
More informationCLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
More informationIBC Module IB0xxQ096T80xx-xx
IBC Module IB0xxQ096T80xx-xx C S US C NRTL US 5:1 Intermediate Bus Converter Module: Up to 850W Output Features & Benefits Size: 2.30 x 1.45 x 0.42in 58.4 x 36.8 x 10.6mm Input: 36 60V DC (38 55V DC for
More informationMW75S single-output AC/DC power supply Power factor corrected Vin, 2 28Vout, 75 watts. I - M3 inserts. Max
MW7S single-output AC/DC power supply Power factor corrected 9 26Vin, 2 28Vout, 7 watts HOW TO ORDER MW 7 - S M / 28 - I Series Total Output Power(W) Single Output Unscreened (I) or Screened(M) INPUT CHARACTERISTICS
More informationIBC Module IB0xE120T32xx-xx
IBC Module IB0xE120T32xx-xx C S US C NRTL US 4:1 Intermediate Bus Converter Module: Up to 300W Output Features & Benefits Size: 2.30 x 0.9 x 0.38in 58.4 x 22.9 x 9.5mm Typical Applications Enterprise networks
More informationFeatures. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
More informationEfficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
More informationMedical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
More informationSPECIFICATION SWITCHING POWER SUPPLY BPS-300SP/2U 6-OUTPUT WITH ACTIVE PFC FUNCTION SINGLE POWER 300W BEST POWER SOLUTIONS, INC.
SPECIFICATION SWITCHING POWER SUPPLY BPS-300SP/2U 6-OUTPUT WITH ACTIVE PFC FUNCTION SINGLE POWER 300W BEST POWER SOLUTIONS, INC. 2F, NO.196-10, SEC.3, DA-TONG RD., XIZHI DIST., NEW TAIPEI CITY, TAIWAN
More informationAIF - PFC 1600W AC-DC Converter Module
AIF - PFC 00W AC-DC Converter Module The PFC Power Factor Correction module is part of Astec s family of advanced High Density modular power supply components. Featuring high reliability and convenient
More informationABC400 Series is a compact and efficient series of AC-DC open frame power supplies suited for telecom, datacom and many other applications.
is a compact and efficient series of AC-DC open frame power supplies suited for telecom, datacom and many other applications. The family meets the international information technology safety standards
More informationMini Family 24V Input
Actual size: 2.28 x 2.2 x 0.5in 57,9 x 55,9 x 12,7mm Mini Family 24V Input C US C NRTL US DC-DC Converter Module S Features & Benefits DC input range: 18 36V Isolated output Operation to 16V at 75% power
More informationAA SERIES (1 x 1 Package) Up to 30 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 90 Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40 C
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
More informationOVP 2:1. Wide Range. Protection
10W, Wide Input Range DIP, Single & Dual Output DC/DC s Key Features High Efficiency up to 88 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA9-1 Safety Approval Complies with EN522 Class A
More informationAS SERIES (2.00 x 1.6 Package) Up to 20 Watt DC-DC Converter
PRODUCT OVERVIEW The AS series offer up to 20 watts of output power in standard 2.00 x 1.60 x 0.45 inches packages. This series features high efficiency and 1500 Volts of DC isolation. The AS series provides
More informationPM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
More informationXD50-24S28-POCW Technical Specification
Key Features Package: Open Frame Small footprint: 2.08 1.48 0.38in 52.8 37.6 9.7mm Product Overview These DC-DC converter modules use advanced power processing, control and packaging technologies to provide
More informationTE W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI Requirements No load input power Average Efficiency Up to 120W of AC-DC Power Universal Input 90-264Vac Input Range IPX-2 Rated Enclosure for protection against liquid
More informationIBC Module IB0xE096T40xx-xx
IBC Module IB0xE096T40xx-xx C S US C NRTL US 5:1 Intermediate Bus Converter Module: Up to 300W Output Features & Benefits Size: 2.30 x 0.9 x 0.38in 58.4 x 22.9 x 9.5mm Typical Applications Enterprise networks
More informationQuiet-Power MQPI-18 M-Grade
Quiet-Power MQPI-18 M-Grade 28 Volt input, 7 Amp M-Grade EMI Filter Module Product Description The MQPI-18 attenuates conducted common-mode (CM) and differential-mode (DM) noise for DC-DC converters including
More informationECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
More informationRipple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
More informationPXD30-xxWS-xx-Single Output DC/DC Converters
PXD30-xxWS-xx-Single Output DC/DC Converters 9 to 36 Vdc and 18 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W Applications Wireless Network Telecom / Datacom Industry Control System Measurement Semiconductor
More informationFor more information, please visit the product page. output. output current max (A)
date 12/12/217 page 1 of 1 SERIES: VMS-2 DESCRIPTION: AC-DC POWER SUPPLY FEATURES compact 2 x 4 high power-density design (CNF version is 2.4 x 4.6 ) universal input range efficiencies up to 93.5% 4th
More informationAIM in a VIA Package AIM1714xB6MC7D5yzz
AIM in a VIA Package AIM1714xB6MC7D5yzz Universal AC Input Module Features & Benefits Universal input (85 to 264V AC, 47 to 63Hz) Chassis Mount or PCB Mount Form Factor Small robust package Low profile
More informationCLP0224 Open Frame Power Supply Vac input; 24Vdc output; 200W Output Power
Applications Industrial equipment Telecommunications equipment Features Compact size 50.8 mm x 101.6 mm x 37.25 mm (2 in x 4 in x 1.47 in) with density of 18 W/in 3 Universal AC Input Range (90 264VAC)
More informationML4818 Phase Modulation/Soft Switching Controller
Phase Modulation/Soft Switching Controller www.fairchildsemi.com Features Full bridge phase modulation zero voltage switching circuit with programmable ZV transition times Constant frequency operation
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Fully Regulated Outputs to + or - 8000 Vdc 4 0-100% Programable Output 4 High Stability (
More informationTE60 60W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI Requirements No load input power Average Efficiency Up to 60W of AC-DC Power Universal Input 90-264Vac Input Range IP22 Rated Enclosure Meets Heavy Industrial Levels
More informationX Series Data Sheet 375, 500 Watt AC-DC and DC-DC DIN-Rail Converters
Features RoHS lead-free-solder and lead-solder-exempted products are available Rugged 5 mm DIN-rail snap-fit design Class I equipment Universal AC-input with single stage conversion AC to DC or DC input
More information(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
More informationCPC1976Y. AC Power Switch INTEGRATED CIRCUITS DIVISION. Description. Features. Approvals. Ordering Information. Applications.
AC Power Switch Parameter Rating Units AC Operating Voltage 2-24 V rms Load Current 2 A rms On-State Voltage Drop. V rms (at I L = 2A rms ) Blocking Voltage 6 V P Features Load Current up to 2A rms 6V
More informationNote1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationAA SERIES (1 x 1 Package) Up to 10 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 87 % Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40
More information75W Constant Current (700mA) LED Driver
75W Constant Current (700mA) LED Driver IZC070-075A-9267C-SA Product Overview The IZC070-075A-9267C-SA operates from a 90-305 Vac input range. This unit will provide up to 700mA of output current and a
More information14A Active EMI Filter SiP for 48 Vdc Bus. Features: CIN
14A Active EMI Filter SiP for 48 Vdc Bus Description: The active EMI filter attenuates conducted commonmode (CM) and differential mode (DM) noise over the CISPR22 frequency range of 150 khz to 30 MHz.
More information