Dual Operational Amplifiers
|
|
- Amice Banks
- 5 years ago
- Views:
Transcription
1 FEATURES Wide range of supply voltages Low supply current drain independent of supply voltage Low input biasing current Low input offset voltage and offset current Input common-mode voltage range includes ground Differential input voltage range equal to the power supply voltage DC voltage gain 100V/mV Typ. Internally frequency compensation DIP-8 PKG ORDERING INFORMATION Device Package DIP-8 DESCRIPTION The consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits. ABSOLUTE MAXIMUM RATING CHARACTERISTIC SYMBOL MIN. MAX. UNIT Supply Voltage V CC - 45 V Input Voltage V IN V Input Current (V IN = -0.3V) I IN - 50 ma Operating Temperature Range T OPR Recommended Operating Condition CHARACTERISTIC SYMBOL MIN. MAX. UNIT Single V CC 5 40 V Supply Voltage Dual V CC V V CC V Feb Rev HTC
2 Ordering Information Package Order No. Description Supply As Status DIP-8 Dual Operational Amplifier, Pb-Free Tube Active PIN CONFIGURATION OUT 1 8 Vcc IN1(-) 2 7 OUT IN1(+) 3 6 IN2(-) GND 4 5 IN2(+) DIP-8 Feb Rev HTC
3 ELECTRICAL CHARACTERISTICS At specified free-air temperature, V CC =5V (unless otherwise noted) PARAMETER TEST CONDITIONS* MIN TYP MAX UNIT V IO Input offset voltage V CC=5V to MAX, V IC=V ICR min, V O=1.4V Full range 9 mv αv IO Average temperature coefficient of input offset voltage I IO Input offset current V O=1.4V Full range 7 μv/ na Full range 150 αi IO Average temperature coefficient of input offset current I IB Input bias current V ICR Common-mode input voltage range V OH High-level output voltage V OL Low-level output voltage A VD Large-signal differential voltage amplification CMRR Common-mode rejection ratio k SVR Supply voltage rejection ratio (ΔV CC/ΔV IO) V O1/V O2 Crosstalk attenuation I O Output current I OS Short-circuit output current I CC Supply current (two amplifiers) V O=1.4V V CC=5V to MAX V CC=MAX, R L=2kΩ Full range 26 V CC=MAX, R L 10kΩ Full range 10 pa/ Full range VCC-1.5 Full range 0 VCC-2.0 Full range R L 10kΩ Full range 5 20 mv V CC=15V V O=1V to 11V R L 2kΩ Vcc = 5 V to MAX, V IC = V ICR min Full range 15 na V V V/mV db Vcc = 5 V to MAX db f=1 khz to 20 khz db V CC=15V, V ID=1V, V O=0V V CC=15V, V ID= -1V, V O=15V V CC = 15 V, V ID= -1 V, V O= 2V Full range Full range 7 ma ma V ID= -1 V, V O= 200mV μa VID = - 1 V, Vo = 15 V ma Vo=2.5 V, No load Full range V CC = MAX, Vo = 0.5Vcc, No load Full range 1 2 ma -loop conditions with zero common-mode input voltage unless otherwise specified. MAX V CC for testing purposes is 36V, Vccabsmax = 45V, Temperature full range is -40 to Feb Rev HTC
4 ELECTRICAL CHARACTERISTICS (CONTINUED) At specified free-air temperature, V CC =5V (unless otherwise noted) PARAMETER TEST CONDITIONS* MIN TYP MAX UNIT Slew rate Gain bandwidth Total harmonic distortion V CC=15V, V IN=0.5 to 3V, R L=2kΩ, C L=100pF, unity gain V CC=30V, f=100khz, V IN=10mV, R L=2kΩ, C L=100pF f = 1kHz, A V = 20dB, R L=2kΩ, V O = 2Vpp, C L=100pF V/us khz % Feb Rev HTC
5 TYPICAL ELECTRICAL CHARACTERISTICS Supply Current Supply Current [ma V - OUTPUT VOLTAGE Supply Voltage [V] Supply current vs. Supply voltage I + O - OUTPUT SOURCE CURRENT [ma] Current Current Sourcing Sinking vs. Output Characteristics 10 VO - OUTPUT VOLTAGE [V] I O - - OUTPUT SINK CURRENT [ma] Voltage Follower Pulse Response Current Sinking vs. Output Characteristics VIN [mv] OUTPUT AVOL - VOLTAGE GAIN [db] INPUT TIME [us] Voltage Follower Pulse Response (Small Signal) 0 0K 0K 0K 1K 10K 100K 1,000K 10,000K f - FREQUENCY [Hz] Open Loop Frequency Response Feb Rev HTC
6 REVISION NOTICE The description in this data sheet can be revised without any notice to describe its electrical characteristics properly. Feb Rev HTC
DUAL OPERATIONAL AMPLIFIER
DUAL OPERATIONAL AMPLIFIER FEATURES n Wide Power Supply Range Single Supply: 3V ~ 32V Dual Supplies: ±.V ~ ±6V n Lower Input Offset : 2mV (Typ.) n Input CommonMode Range Include Ground n Differential Input
More informationAOUT AIN- AIN+ GND 1 AOUT 2 AIN- 3 AIN+
www.dalsemi.com FEATURES High Slew Rate: V/µs High Gain Bandwidth: 6.5 MHz Supply Voltage Range.5 to 5.5V Rail-to-Rail Output Swing.75 ma Supply Current per Channel ORDERING INFORMATION Part Number Description
More informationLF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationLM2904AH. Low-power, dual operational amplifier. Related products. Description. Features. See LM2904WH for enhanced ESD performances
LM2904AH Low-power, dual operational amplifier Datasheet - production data Related products See LM2904WH for enhanced ESD performances Features Frequency compensation implemented internally Large DC voltage
More informationLM2904WH. Low-power dual operational amplifier. Description. Features
Low-power dual operational amplifier Datasheet - production data MiniSO8 Wafer form SO8 Features Frequency compensation implemented internally Large DC voltage gain: 100 db Wide bandwidth (unity gain:
More informationLow Power QUAD Operational Amplifiers
Low Power QUAD Operational Amplifiers Product Description The GS4 consists of four independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate
More informationLow power quad operational amplifiers
Low power quad operational amplifiers Features Wide gain bandwidth:.mhz typ. Input common-mode voltage range includes ground Large voltage gain:db typ. Very low supply current per amplifier:ua typ. Low
More informationRT2904WH. RobuST low-power dual operational amplifier. Applications. Features. Description
RobuST low-power dual operational amplifier Datasheet - production data Features D SO8 (plastic micropackage) Pin connections (top view) Frequency compensation implemented internally Large DC voltage gain:
More informationNJM324C. Low power quad operational amplifiers
Low power quad operational amplifiers Features Wide gain bandwidth:.mhz typ. Input common-mode voltage range includes ground Large voltage gain:db typ. Very low supply current per amplifier:ua typ. Low
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD DUAL OPERATIONAL AMPLIFIER DESCRIPTION The UTC LM358 consists of two independent high gain, internally frequency compensated operational amplifier. It can be operated from
More informationDual Operational Amplifiers JAN. 2010
Dual Operational Amplifiers JAN. Product Description The consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from
More informationLF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS
LF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationPart Number Temperature Range Package Packing Marking. DIP14 Tube LM2902N LM2902D/DT SO-14 Tube or Tape & Reel
Low Power Quad Operational Amplifier Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes ground Large voltage gain: 1dB Very low supply current per amp: 375µA Low input bias current: 2nA
More informationRT2902. RobuST low-power quad operational amplifier. Applications. Description. Features
RobuST low-power quad operational amplifier Datasheet - production data Features D SO14 (plastic micropackage) Pin connections (top view) Output 1 Non-inverting Input 1 3 Non-inverting Input 2 Inverting
More informationLM158,A-LM258,A LM358,A
,A-LM258,A LM358,A LOW POWER DUAL OPERATIONAL AMPLIFIERS INTERNALLY FREQUENCY COMPENSATED LARGE DC VOLTAGE GAIN: 1dB WIDE BANDWIDTH (unity gain): 1.1MHz (temperature compensated) VERY LOW SUPPLY CURRENT/OP
More informationTL 072 S G Green G : Green. TL072SG-13 S SOP-8L 2500/Tape & Reel -13
Features General Description Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion 0.003%
More informationTS324 Low Power Quad Operational Amplifiers
DIP-14 General Description SOP-14 TS324 contains four independent high gain operational amplifiers with internal frequency compensation. The four opamps use a split power supply. The device has low power
More informationLow-Power Quad Operational Amplifier FEATURES: DESCRIPTION: Memory. Logic Diagram. RAD-PAK technology-hardened against natural space radiation
Low-Power Quad Operational Amplifier FEATURES: RAD-PAK technology-hardened against natural space radiation Total dose hardness: - > 100 krad (Si), depending upon space mission Excellent Single Event Effects:
More informationLM124, LM124A, LM224, LM224A LM324, LM324A, LM2902 QUADRUPLE OPERATIONAL AMPLIFIERS
Wide Range of Supply Voltages: Single Supply...3 V to 30 V (LM2902 3 V to 26 V) or Dual Supplies Low Supply Drain Independent of Supply Voltage... 0.8 Typ Common-Mode Input Voltage Range Includes Ground
More informationQuad Ground Sense Operational Amplifier. The CO324 is monolithic IC with four built-in operational amplifiers featuring internal phase compensation.
The CO4 is monolithic IC with four built-in operational amplifiers featuring internal phase compensation. Either a dual or single power supply can be driven, and these products can be driven by a digital
More informationTL072 TL072A - TL072B
A - B LOW NOISE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORT-CIRCUIT PROTECTION
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD LOW POWER DUAL J-FET OPERATIONAL AMPLIFIER DESCRIPTION The UTC TL062 is a high speed J-FET input dual operational amplifier. It incorporates well matched, high voltage J-FET
More informationLF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationNJM320A/NJM321A. Low power single channel OP-Amp
Low power single channel OPAmp NJMA/NJMA Features Input offset voltage :.mv max. Input offset voltage drift : µv/ typ. Supply current :.ma typ. at Vcc + =V Input bias current : na typ. Input commonmode
More informationLM2904,LM358/LM358A,LM258/ LM258A
LM2904,LM358/LM358A,LM258/ LM258A Dual Operational Amplifier www.fairchildsemi.com Features Internally Frequency Compensated for Unity Gain Large DC Voltage Gain: 100dB Wide Power Supply Range: LM258/LM258A,
More informationHIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER V + B OUTPUT B -INPUT B +INPUT SOP8 SSOP8 MSOP8(VSP8) SOP14 SSOP14
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER FEATURES High Slew Rate 10V/µs High Bandwidth 3MHz High Unity Gain Frequency 3.6MHz Input Offset Voltage 5.5mV max. Single Supply 3V to 36V Operating Temperature
More informationObsolete Product(s) - Obsolete Product(s)
Low power quad operational amplifier Features Wide gain bandwidth: 1.3 MHz Extended temperature range: -40 C to +150 C Input common-mode voltage range includes negative rail Large voltage gain: 100 db
More informationLM158, LM258, LM358. Low-power dual operational amplifiers. Related products. Description. Features. See LM158W for enhanced ESD ratings
Low-power dual operational amplifiers Datasheet - production data Related products See LM158W for enhanced ESD ratings Features Frequency compensation implemented internally Large DC voltage gain: 100
More informationNJM2904C / NJM2904CA SINGLE-SUPPLY DUAL OPERATIONAL AMPLIFIER
NJM94C / NJM94CA SINGLE-SUPPLY DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM94C / NJM94CA consists of two independent, high gain, internally frequency compensated operation amplifiers, which were
More informationDual Operational Amplifiers JAN. 2010
Dual Operational Amplifiers JAN. Product Description The consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from
More informationLow power dual operational amplifier
Low power dual operational amplifier NJM58C / NJM58CA Features Internally frequency-compensated Large DC voltage gain : db typ. Wide bandwidth (unity gain ) :.MHz typ. Low Operating Current : 5 ua/ch typ.
More informationQuad ground sense operational amplifier
Quad ground sense operational amplifier BAA / BAAF / BAAFV The BAA, BAAF, and BAAFV are monolithic ICs with four built-in operational amplifiers featuring internal phase compensation. Either a dual or
More informationLM348. Quad Operational Amplifier. Features. Description. Internal Block Diagram.
Quad Operational Amplifier www.fairchildsemi.com Features LM741 OP Amp operating characteristics Low supply current drain Class AB output stage-no crossover distortion Pin compatible with the LM324 Low
More informationDual Operational Amplifier and Reference Regulator
Dual Operational Amplifier and Reference Regulator FP13 General Description The FP13 is a single chip composed of one independent OP-AMP (OPA2) and another OP-AMP (OPA1) with a 2.5V precision voltage reference
More informationLM2904, LM2904A. Low-power dual operational amplifier. Description. Features. Related products:
, A Low-power dual operational amplifier Datasheet - production data Features Frequency compensation implemented internally Large DC voltage gain: 100 db Wide bandwidth (unity gain): 1.1 MHz (temperature
More informationOP07C PRECISION OPERATIONAL AMPLIFIERS
OP0C PRECISION OPERATIONAL AMPLIFIERS Low Noise No External Components Required Replace Chopper Amplifiers at a Lower Cost Wide Input-Voltage Range...0 to ± V Typ Wide Supply-Voltage Range...± V to ± V
More informationDUAL OP AMP AND VOLTAGE REFERENCE General Description. Features
General Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two Op Amps and
More informationLF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER INTERNALLY ADJUSTABLE INPUT OFFSET VOLTAGE LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW
More informationUTC UNISONIC TECHNOLOGIES CO., LTD. 1 LINEAR INTEGRATED CIRCUIT QUAD OPERATIONAL AMPLIFIERS
UTC LM QUAD OPERATIONAL AMPLIFIERS DESCRIPTION The UTC LM consists of four independent, high gain internally frequency compensated operational amplifiers which are designed specifically to operated from
More informationUNISONIC TECHNOLOGIES CO., LTD LM321
UNISONIC TECHNOLOGIES CO., LTD LM321 LOW POWER SINGLE OP AMP DESCRIPTION The UTC LM321 s quiescent current is only 430µA (5V). The UTC LM321 brings performance and economy to low power systems, With a
More informationTS358 Single Supply Dual Operational Amplifiers
SOP-8 DIP-8 Pin assignment: 1. Output A 8. Vcc 2. Input A (-) 7. Output B 3. Input A (+) 6. Input B (-) 4. Gnd 5. Input B (+) General Description Utilizing the circuit designs perfected for recently introduced
More informationLM158/LM258/LM358/LM2904 Low Power Dual Operational Amplifiers
LM158/LM258/LM358/LM2904 Low Power Dual Operational Amplifiers General Description The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which
More informationUNISONIC TECHNOLOGIES CO., LTD MC4558
UNISONIC TECHNOLOGIES CO., LTD DUAL OPERATIONAL AMPLIFIER MSOP-8 TSSOP-8 DESCRIPTION The UTC is a monolithic integrated circuit designed for dual operational amplifier. FEATURES * No frequency compensation
More informationNE/SA/SE532 LM258/358/A/2904 Low power dual operational amplifiers
INTEGRATED CIRCUITS NE/SA/SE53 Supersedes data of Jan Jul 1 DESCRIPTION The 53/358/LM94 consists of two independent, high gain, internally frequency-compensated operational amplifiers internally frequency-compensated
More informationDesignated client product
Designated client product This product will be discontinued its production in the near term. And it is provided for customers currently in use only, with a time limit. It can not be available for your
More informationLM101A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS
LM1A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS LM1A LM201A LM301A INPUT OFFSET VOLTAGE 0.7mV 2mV INPUT BIAS CURRENT 25nA 70nA INPUT OFFSET CURRENT 1.5nA 2nA SLEW RATE AS INVERSINGV/µs V/µs AMPLIFIER
More informationNJM8512/NJM8513. Precision, JFET Input Operational Amplifier
Precision, JFET Input Operational Amplifier NJM8512/NJM8513 FEATURES Low Input Offset Voltage V IO =4μV max. V IO =7μV max. (Ta= -4 C to +125 C) Low Input Offset Voltage Drift ΔV IO /ΔT=5μV/ C max. (Ta=
More informationNJM2734. Rail-to-Rail Input/Output Quad Operational Amplifier
Rail-to-Rail Input/Output Quad Operational Amplifier NJM2734 GENERAL DESCRIPTION NJM2734 is a Rail-to-Rail Input/Output quad operational amplifier featuring Low power, low noise and operation from.8v.
More informationNon-inverting input 1. Part Number Temperature Range Package Packing Marking. 4558C MC4558CPT TSSOP8 Tape & Reel MC4558IN
Wide Bandwidth Dual Bipolar Operational Amplifier Internally compensated Short-circuit protection Gain and phase match between amplifier Low power consumption Pin-to-pin compatible with MC1458/LM358 Gain
More informationRail-to-Rail Input/Output Quad Operational Amplifier 8. C OUTPUT 9. C -INPUT 10. C +INPUT 11. GND(V ) 12. D +INPUT 13. D INPUT 14.
Rail-to-Rail Input/Output Quad Operational Amplifier GENERAL DESCRIPTION is a Rail-to-Rail Input/Output quad operational amplifier featuring Low power, low noise and operation from.8v. Rail-to-Rail Input/Output
More informationNJM2732. Rail-to-Rail Input/Output Dual Operational Amplifier
Rail-to-Rail Input/Output Dual Operational Amplifier NJM7 GENERAL DESCRIPTION The NJM7 is a Rail-to-Rail Input/Output dual operational amplifier featuring low power, low noise and a low voltage operation
More informationLM321 Low Power Single Op Amp
Low Power Single Op Amp General Description The LM321 brings performance and economy to low power systems. With a high unity gain frequency and a guaranteed 0.4V/µs slew rate, the quiescent current is
More informationDual operational amplifier
Dual operational amplifier The BA8, BA8F, and BA8N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These
More informationNJM13404 SINGLE SUPPLY DUAL OPERATIONAL AMPLIFIER 1 8 A
SINGLE SUPPLY DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The is single-supply dual operational amplifier, which can operate from V supply. The features are low offset voltage, low bias current, high
More informationOPERATIONAL AMPLIFIER & VOLTAGE REFERENCE KL103/A TECHNICAL DATA DESCRIPTION. PIN CONNECTIONS (top view) OPERATIONAL AMPLIFIER
TECHNICAL DATA OPERATIONAL AMPLIFIER & OLTAGE REFERENCE KL13/A OPERATIONAL AMPLIFIER LOW INPUT OFFSET OLTAGE :. typ. LOW SUPPLY CURRENT : 3 A/op. (@ cc = ) MEDIUM BANDWIDTH (unity gain) :.9MHz LARGE OUTPUT
More informationNJM2734SCC. Rail-to-Rail Input/Output Quad Operational Amplifier PACKAGE OUTLINE
Rail-to-Rail Input/Output Quad Operational Amplifier GENERAL DESCRIPTION NJM74SCC is a Rail-to-Rail Input/Output quad operational amplifier featuring Low power, low noise and operation from.8v. Rail-to-Rail
More informationObsolete Product(s) - Obsolete Product(s)
OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET VOLTAGE :.5mV typ for TSM14A WIDE POWER SUPPLY RANGE : ±1.5V to ±15V
More informationUNISONIC TECHNOLOGIES CO., LTD
TL72 UNISONIC TECHNOLOGIES CO., LTD LOW NOISE DUAL J-FET OPERATIONAL AMPLIFIER SOP-8 DESCRIPTION The UTC TL72 is a high speed J-FET input dual operational amplifier. It incorporates well matched, high
More informationTEB1033 TEF1033-TEC1033
TEB1033 TEF1033-TEC1033 PRECISION DUAL OPERATIONAL AMPLIFIERS VERY LOW INPUT OFFSET VOLTAGE : 1mV max. LOW DISTORTION RATIO LOW NOISE VERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD SINGLE GENERAL PURPOSE, LOW VOLTAGE, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIER DESCRIPTION The UTC LV321 is a single op amp with low supply current. It brings good performance
More informationUNISONIC TECHNOLOGIES CO., LTD LM833 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD LM833 Preliminary CMOS IC DUAL OPERATIONAL AND LOW VOLTAGE NOISE AMPLIFIER DESCRIPTION The UTC LM833 is integrated circuit amplifiers which combine dual operational and low
More informationUNISONIC TECHNOLOGIES CO., LTD
UM64/A UNISONIC TECHNOLOGIES CO., LTD QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE LINEAR INTEGRATED CIRCUIT SOP-16 DESCRIPTION The UTC UM64/A is a monolithic IC that includes four op-amps
More informationNJU7076/NJU7077/NJU7078
NJU776/NJU777/NJU778 Precision, Low Noise, Rail-to-Rail Output, CMOS Operational Amplifier GENERAL DESCRIPTION The NJU776/NJU777/NJU778 is a high precision Rail-to-Rail output Single/Dual/Quad CMOS operational
More informationTSM104W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS
TSM14W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET
More informationKA224/KA224A, KA324/KA324A, KA2902
KA224/KA224A, KA324/KA324A, KA2902 Quad Operational Amplifier www.fairchildsemi.com Features Internally Frequency Compensated for Unity Gain Large DC Voltage Gain: 100dB Wide Power Supply Range: KA224
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD GENERAL PURPOSE, LOW VOLTAGE, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS DESCRIPTION The UTC LV358 is a dual op amp with low supply current and low voltage (2.7-5.5V). It
More informationLF253, LF353. Wide bandwidth dual JFET operational amplifiers. Features. Description
Wide bandwidth dual JFET operational amplifiers Features Low power consumption Wide common-mode (up to + ) and differential voltage range Low input bias and offset current Output short-circuit protection
More informationIP102. Dual OPAmp-Dual Comparator and Adj. Shunt Regulator DESCRIPTION FEATURES ORDERING INFORMATION BLOCK DIAGRAM
DESCRIPTION The IP102/A is a monolithic IC that includes two operational amplifiers, two comparators and an adjustable shunt regulator. This device is offering space and cost saving in many applications
More informationDual, Ultralow Distortion, Ultralow Noise Op Amp AD8599
Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz
More informationLM324/LM324A, LM2902/LM2902A
www.fairchildsemi.com LM324/LM324A, LM2902/LM2902A Quad Operational Amplifier Features Internally Frequency Compensated for Unity Gain Large DC Voltage Gain: 100dB Wide Power Supply Range: LM324/LM324A
More informationDUAL BIPOLAR OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description The consists of two high performance operational amplifiers. The IC features high gain, low equivalent input noise voltage, high input resistance, excellent channel separation, wide
More information1.8 V input/output, rail-to-rail, low power operational amplifiers. Reference. TS185x TS1851 TS1852 TS1854. TS185xA TS1851A TS1852A TS1854A
1.8 V input/output, rail-to-rail, low power operational amplifiers Features Operating range from V CC = 1.8 to 6 V Rail-to-rail input and output Extended V icm (V CC- -.2 V to V CC + +.2 V) Low supply
More informationLM2904 LOW POWER DUAL OPERATIONAL AMPLIFIERS. INTERNALLY FREQUENCY COMPENSATED LARGE DC VOLTAGE GAIN : 100dB
LOW POWE DUAL OPEATIONAL AMPLIFIES INTENALLY FEQUENCY COMPENSATED LAGE DC VOLTAGE GAIN : 1dB WIDE BANDWIDTH (unity gain) : 11MHz (temperature compensated) VEY LOW SUPPLY CUENT/AMPLI (5µA) - ESSENTIALLY
More informationNJM5532C LOW-NOISE DUAL OPERATIONAL AMPLIFIER NJM5532CG (SOP8) FEATURES PIN CONFIGURATION. EQUIVALENT CIRCUIT (Each Amplifier) - 1 -
LOWNOISE DUAL OPERATIONAL AMPLIFIER NJM3C GENERAL DESCRIPTION The NJM3C is a high performance dual low noise operational amplifier. This features low noise performance (nv/ Hz), and considerably higher
More informationTL061 TL061A - TL061B
TL61 TL61A - TL61B LOW POWER J-FET SINGLE OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT
More informationTL081 TL081A - TL081B
TL081 TL081A - TL081B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
More informationSINGLE SUPPLY QUAD OPERATIONAL AMPLIFIER
NJM SINGLE SUPPLY QUAD OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM is single-supply quad operational amplifier, which can operate from V supply. The features are low offset voltage, low bias current,
More informationSingle-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5
More informationKA3303/KA3403. Quad Operational Amplifier. Features. Description. Internal Block Diagram.
Quad Operational Amplifier www.fairchildsemi.com Features Output voltage can swing to GND or negative supply Wide power supply range; Single supply of 3.0V to 36V Dual supply of ±1.5V to ±18V Electrical
More informationLM837 Low Noise Quad Operational Amplifier
LM837 Low Noise Quad Operational Amplifier General Description The LM837 is a quad operational amplifier designed for low noise, high speed and wide bandwidth performance. It has a new type of output stage
More informationUNISONIC TECHNOLOGIES CO., LTD UM609A
UNISONIC TECHNOLOGIES CO., LTD DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER DESCRIPTION The UTC is a monolithic IC that includes one independent op-amp and another op-amp for witch the non inverting
More informationTL074 TL074A - TL074B
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD DUAL OPERATIONAL AMPLIFIER DESCRIPTION The UTC MC1458 is a high performance dual operational amplifier. It is designed for a wide range of analog applications. The high gain
More informationRail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
19-579; Rev ; 12/1 EVALUATION KIT AVAILABLE Rail-to-Rail, 2kHz Op Amp General Description The op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationTSM100 SINGLE OPERATIONAL AMPLIFIER AND SINGLE COMPARATOR
OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE : 0.5 typ. MEDIUM BANDWIDTH (unity gain) : 0.9MHz LARGE OUTPUT VOLTAGE SWING : 0V to (V CC - 1.5V) INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND WIDE POWER
More informationTSM106. Dual Operational Amplifier and Voltage Reference. Operational Amplifier: Voltage Reference: PIN CONNECTIONS (top view) DESCRIPTION ORDER CODES
Dual Operational Amplifier and Voltage Reference Operational Amplifier: Low input offset voltage: 1 typ. Medium bandwidth (unity gain): 0.9MHz Large output voltage swing: 0V to (V CC - 1.5V) Input common
More informationMC33001/A/B MC34001/A/B MC35001/A/B GENERAL PURPOSE SINGLE JFET OPERATIONAL AMPLIFIERS.
MC33/A/B MC3/A/B MC3/A/B GENERAL PURPOSE SINGLE JFET OPERATIONAL AMPLIFIERS. LOW POWER CONSUMPTION WIDE COMMONMODE (UP TO VCC + ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT. OUTPUT
More informationLow Cost JFET Input Operational Amplifiers ADTL082/ADTL084
Preliminary Technical Data FEATURES TL082 / TL08 compatible Low input bias current: 0 pa max Offset voltage: 5mV max (ADTL082A/ADTL08A) 9 mv max (ADTL082/ADTL08) ±5 V to ±5 V operation Low noise: 5 nv/
More informationLOW POWER QUAD OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description Features The consists of four independent, high gain and internally frequency compensated operational amplifiers. It is specifically designed to operate from a single power supply.
More informationTL062 TL062A - TL062B
TL62 TL62A TL62B LOW POWER JFET DUAL OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMONMODE (UP TO + ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT SHORTCIRCUIT
More informationDual operational amplifier
DESCRIPTION The 77 is a pair of high-performance monolithic operational amplifiers constructed on a single silicon chip. High common-mode voltage range and absence of latch-up make the 77 ideal for use
More informationLM2902. Low power quad operational amplifier. Features. Description
Low power quad operational amplifier Features Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes negative rail Large voltage gain: 100dB Very low supply current per amp: 375µA Low input
More informationMicropower Precision CMOS Operational Amplifier AD8500
Micropower Precision CMOS Operational Amplifier AD85 FEATURES Supply current: μa maximum Offset voltage: mv maximum Single-supply or dual-supply operation Rail-to-rail input and output No phase reversal
More informationOPERATIONAL AMPLIFIER PREPARED BY, PROF. CHIRAG H. RAVAL ASSISTANT PROFESSOR NIRMA UNIVRSITY
OPERATIONAL AMPLIFIER PREPARED BY, PROF. CHIRAG H. RAVAL ASSISTANT PROFESSOR NIRMA UNIVRSITY INTRODUCTION Op-Amp means Operational Amplifier. Operational stands for mathematical operation like addition,
More informationUNISONIC TECHNOLOGIES CO., LTD UM601A
UNISONIC TECHNOLOGIES CO., LTD VOLTAGE AND CURRENT CONTROLLER DESCRIPTION The UTC integrated circuit incorporates a high stability series band gap voltage reference, two ORed operational amplifiers and
More informationAPX358/APX324 LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT DUAL/QUAD OPERATIONAL AMPLIFIERS
Features General Description (For V + =5V and V - =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Operating temperature range (-40 C to +85 C) Gain-bandwidth
More informationU U W PACKAGE I FOR ATIO. RH1498M 10MHz, 6V/µs, Dual Rail-to-Rail Input and Output Precision C-Load Op Amp DESCRIPTIO BUR -I CIRCUIT
RH498M MHz, 6V/µs, Dual Rail-to-Rail Input and Output Precision C-Load Op Amp DESCRIPTIO U The RH498 is a dual, rail-to-rail input and output precision C-Load TM op amp with a MHz gain-bandwidth product
More informationTL082 TL082A - TL082B
TL082 TL082A - TL082B GENERAL PURPOSE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
More informationLM224A, LM324A. Low-power quad operational amplifiers. Features. Description
Low-power quad operational amplifiers Features Datasheet - production data D SO14 (plastic micropackage) Wide gain bandwidth: 1.3 MHz Input common mode voltage range includes ground Large voltage gain:
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. -LM258-LM358 A-LM258A-LM358A Low power dual operational amplifiers Features
More information