MaxxBass Development Recommendations
|
|
- Amos Knight
- 5 years ago
- Views:
Transcription
1 MaxxBass Development Recommendations 1 Purpose The document provides recommendations on MaxxBass in evaluation, selection of possible implementations, circuit design and testing. It also refers to several other documents with additional details in specific areas. This document and other related materials can be found at 2 MaxxBass Benefits MaxxBass is a patented signal processing technology from Waves. It extends the perceived bass frequency response of almost any loudspeaker system by 1 to 1.5 octaves using a pyschoacoustic effect based on the Phenomenon of the Missing Fundamental. Since the most significant audio quality limitation in most audio systems is the loudspeaker bass response, MaxxBass offers the manufacturer a new tool to optimize acoustic system performance. The designer can choose to use MaxxBass to improve the bass response octaves, lower speaker enclosure volume, lower power consumption or some combination of these to best meet their market requirements. Some current applications include Improve bass response of existing subwoofer systems Reduce volume or power requirements of subwoofers and still keep the same relative acoustic performance Reduce power consumption and improve battery life in portable systems Compensate for a med-bass frequency gap where small satellites speakers in home theater systems do reproduce frequency down to the subwoofer crossover. Improve the bass response in space limited LCD TVs and notebook PCs. 3 Evaluation Products and Procedures Waves offer customers both hardware and software evaluation tools for MaxxBass described here. May
2 3.1 MaxxBass 102 The MaxxBass 102 is a good initial evaluation system for MaxxBass. It supports simple stereo line-in and line-out on RCA connectors. It is simple to use for evaluation with most consumer electronic devices. More information including detailed documentation on how to use this system in evaluating MaxxBass can be found at The MaxxBass 102 is shown in Figure 1. The system has controls for input attenuation, MaxxBass Intensity, fully variable MaxxBass Frequency, and bypass. The variable MaxxBass Frequency control is convenient for testing and tuning to a wide range of acoustic designs. One limitation is that no output gain stage is included so the overall signal strength is reduced. Figure 1. MaxxBass MX3000AS Reference Design Waves has a simple 2-layer PCB reference design for the MX3000AS. This is a low cost implementation suitable for consumer electronics. Complete gerber file layout and schematics are available at The MX3000AS Reference Design shown in Figure 2 has two fixed crystals at 5 and 8 Mhz, so the system can support only two MaxxBass Frequencies of roughly 50 and 80Hz. To set the system for other MaxxBass Frequencies, the crystals can be replaced. This system has input and output level controls, as well as controls for two MaxxBass Frequencies, MaxxBass Intensity, bypass, and fixed 100Hz LPF. May
3 Figure 3. MX3000AS Reference Design 3.3 Renaissance Bass Plug-in Waves also offers plug-in software that operates in any of the popular digital audio editing environments for evaluation. The Renaissance Bass plug-in is the second generation MaxxBass plug-in and provides the same functionality as the MaxxBass ASIC and other consumer software implementations. The user interface for Renaissance Bass is shown in Figure 3. The software can be downloaded for a free two week trial from Please contact Waves if OEMs need an extended time authorization for further evaluation. Figure 3. Renaissance Bass User Interface May
4 4 Types of MaxxBass Implementations Waves offers several different implementations for MaxxBass, so that cost-effective solutions are available for almost any application. 4.1 MX3000AS MaxxBass ASIC A low cost mixed signal ASIC, MX3000AS, is suggested for traditional analog based systems. The MX3000AS is packaged in a tiny 16-pin SOIC. It includes both a full custom DSP, sigma-delta ADC, DAC and high quality analog circuit for a complete MaxxBass DSP system. This product is purchased from directly from Waves or its authorized distributors. Its pricing includes patent royalties for MaxxBass, so no other expense is involved. Full MX3000AS information including datasheet, reference design and other materials is available at This document emphasizes design and testing recommendations for using the MX3000AS. 4.2 DSP Software Licensing For DSP based systems in areas such as home theater or automotive in-dash CD/Receivers it may be possible to operate the MaxxBass algorithm on existing DSPs used for other functions. MaxxBass DSP licensing is available for high volume consumer and automotive applications of 100Ku/yr and more. Waves has certified the MaxxBass algorithm on DSPs from AKM, Analog Devices, Motorola and Texas Instruments. Other porting and certifications are pending, so check the website for the latest status. The MaxxBass code can be ported to almost any audio DSP architecture. On a Motorola DSP563xx architecture, a MaxxBass stereo implementation requires about 10.5 MIPS, 240 words program and 31 words data. The system design flow is similar to designs with the MX3000AS ASIC except that the developer will implement the MaxxBass functionality by DSP code. 4.3 PC Software Licensing For personal computers it is recommended to implement MaxxBass in software directly on the host CPU. Waves has licensed Sony, who uses Renassiance Bass/MaxxBass in their Sonic Stage Mastering Studio application on all desktop and notebook PCs. Waves has also developed a solution for MaxxBass using a driver level solution in SigmaTel s PC codec driver architecture. This approach can be attractive as the MaxxBass function is then independent of any specific application and can be applied to all programs requiring audio output including music players, movie players, and games. May
5 5 General Development Flow for MaxxBass Choose the implement type best suited to your needs ASIC, DSP or PC host Define speaker configuration 2.0, 2.1, 4.1, 5.1 etc Define and measure the acoustic roll-off of speakers (f3) Set initial MaxxBass Frequency at 70% of f3 (for example 70Hz on a loudspeaker with 100Hz f3). Tune through listening tests for optimal response. Set initial MaxxBass Intensity at maximum. This can be tuned to lower intensity settings using I2C commands. 6 MX3000AS Design Recommendations Designers using the MX3000AS should begin their efforts by reviewing the MX3000AS Reference Design which is available at Here are several additional suggestions that can help ensure that the best results are obtained. 6.1 Input level to MX3000AS The MX3000AS has a maximum input level of 1V peak-to-peak. It is important not to provide a higher level input, as the input level can clip. The MX3000AS has a soft clipping feature, so it does not sound as noticeable as traditional analog clipping. The main effect is that the MaxxBass improvement will be sharply degraded. 6.2 Input level to amplifier The MaxxBass adds a specific type of harmonics. The maximum gain with a full scale input is +6dB, so the input to the amplifier should be designed to support this amount of headroom. MaxxBass also implements a HPF function at the MaxxBass Frequency, so this can protect speakers from the most damaging low frequency energy. If the amplifier has a high distortion it will degrade the MaxxBass sound quality. 6.3 Choosing clock source A crystal oscillator or ceramic resonator clock source can be used. The MX3000AS datasheet discusses how to best select the initial clock frequency, and the final frequency should be choosen through acoustic listening tests. 6.4 Reset Circuit If a RC circuit is used for reset, this circuit should be designed carefully. Please see the MX3000AS datasheet for details. 6.5 MaxxBass capacitor May
6 A 15ns MaxxBass capacitor Crc should be used for all MaxxBass Frequency settings. Previous versions of the MX3000AS datasheet indicated that this capacitor should be chosen based MaxxBass Frequency, which is not recommended. 6.6 Bypass capacitors Bypass capacitors to ground are required on all inputs and outputs. 6.7 Input and output decoupling capacitors 22pF to 33pF capacitors are needed on the audio input and output pins in order to avoid output oscillations. 6.8 Number of PCB Layers It is generally recommended that a 2 layer PCB design be used such as the MX3000AS Reference Design. More than 2 layers is OK. One layer designs can be used, but the reset sensitivity is much higher in these designs, so a digital Reset sequence is necessary. 6.9 Layout Suggestions It is suggested that the designer reuse the MX3000AS Reference Design as closely as possible. Some additional suggestions are Keep the clock leads as short as possible Use wide trace lines of at least 15-20mils for conduction paths Keep decoupling capacitors has close to the MX3000AS as possible. 7 MaxxBass Prototype Tuning Recommendations It is recommended that several functions be added to the initial development PCB in order to simplify optimal tuning of MaxxBass in the production circuit. 7.1 MaxxBass Bypass Switch A MaxxBass bypass switch is very useful during the development phase to enable the user to disable MaxxBass during testing and tuning. It is desirable to have a red LED indicator illuminate during Bypass. This can remain or be eliminated in the production circuit. 7.2 Two MaxxBass Crystals or Ceramic Resonators It is helpful to have the initial PCB support two different clock frequencies, so that these can be compared and evaluated in the application circuit. Normally only one clock frequency would be used in the final circuit. May
7 7.3 Peak detector on MX3000AS input A peak detector with yellow LED indicator is desirable for tuning. The LED should be illuminated if the peak reaches 1Vptp. 7.4 LPF requirements If MaxxBass is implemented in a subwoofer for a 2.1 audio system. It is recommended that first a L+R channels be added, and then a low pass filter (LPF) is used on the summed mono channel. The LPF output should then be connected to both L and R inputs of the MX3000AS. May
Bass Extension Comparison: Waves MaxxBass and SRS TruBass TM
Bass Extension Comparison: Waves MaxxBass and SRS TruBass TM Meir Shashoua Chief Technical Officer Waves, Tel Aviv, Israel Meir@kswaves.com Paul Bundschuh Vice President of Marketing Waves, Austin, Texas
More informationPB 700 PB 1000 PB 1100 PB 1500 PB 2600 PB 1200 PB 1700 PB 2200 PB 2700 USER'S MANUAL.
PB 700 PB 1000 PB 1100 PB 1500 PB 2600 PB 1200 PB 1700 PB 2200 PB 2700 USER'S MANUAL www.pyramidcaraudio.com congratulations... on your purchase of a Pyramid America Series amplifier. This amplifier extends
More information6 TH GENERATION PROFESSIONAL SOUND FOR CONSUMER ELECTRONICS
6 TH GENERATION PROFESSIONAL SOUND FOR CONSUMER ELECTRONICS Waves MaxxAudio is a suite of advanced audio enhancement tools that brings award-winning professional technologies to consumer electronics devices.
More informationDesigning a Premium Audio System. Gregg Scott Senior Applications Engineer Mid Power Audio Amplifiers
Designing a Premium Audio System Gregg Scott Senior Applications Engineer Mid Power Audio Amplifiers 1 Gregg Scott Senior Applications Engineer, MPAA Career California Polytechnic State University, San
More information11. Audio Amp. LM386 Low Power Amplifier:
EECE208 INTRO TO EE LAB Dr. Charles Kim 11. Audio Amp Objectives: The main purpose of this laboratory exercise is to design an audio amplifier based on the LM386 Low Voltage Audio Power Amplifier chip
More informationNemFX M-Type Version. Nemesis Technology, Inc.
NemFX M-Type Version Digital Multi-Effects Module Features Low cost and high performance Digital Multi-Effects Module Superior sound quality 16 built-in Reverb, Chorus, Flanger, Delay and Multi-Effects
More informationNemFX. Nemesis Technology, Inc. Digital Multi-Effects Module
NemFX Digital Multi-Effects Module Features Low cost and high performance Digital Multi- Effects Module Superior sound quality 32 or 16 built-in Reverb, Delay, Chorus, Flanger and Multi-Effects programs
More information360mm (14-3/16 ) x 224mm (8-13/16 ) x 67mm (2-5/8 )
EN-41400 (4 Channel) EN-21200 (2 Channel) Class Class-AB Class-AB Power 1400 Watts 1200 Watts Frequency Response 10Hz - 42kHz 10Hz - 45kHz Dimensions 360mm (14-3/16 ) x 224mm (8-13/16 ) x 67mm (2-5/8 )
More informationMini Evaluation Board for Filterless Class-D Audio Amplifier EVAL-SSM2301-MINI
Mini Evaluation Board for Filterless Class-D Audio Amplifier EVAL-SSM30-MINI FEATURES DC power supply accepts.5 V to 5.5 V Single-ended and differential input capability Extremely small board size allows
More informationOPTI OWNER'S MANUAL - 1
1. Contents 2. Introduction 3. Features 4. Specifications 5. Amplifier installation 6. 7. Features and controls 8.9.System wiring 10.11. Troubleshooting OPTI OWNER'S MANUAL - 1 Thank you for purchasing
More informationDirect Digital Amplification (DDX )
WHITE PAPER Direct Amplification (DDX ) Pure Sound from Source to Speaker Apogee Technology, Inc. 129 Morgan Drive, Norwood, MA 02062 voice: (781) 551-9450 fax: (781) 440-9528 Email: info@apogeeddx.com
More informationLanzar Audio Inc rd Street, Brooklyn, NY (718)
Lanzar Audio Inc. 1600 63rd Street, Brooklyn, NY 11204 (718) 236-8000 www.lanzar.com Features and Controls Congratulations on your purchase of a Lanzar MAX PRO amplifier. You have purchased a quality product
More information3-Way Active Crossover Model XOVER-3. Xkitz.com. User s Manual. Features. Rev 2.1
3-Way Active Crossover Model XOVER-3 User s Manual Rev 2.1 Xkitz.com Features 3-way Active Crossover for driving separate subwoofer, midrange and tweeter amplifiers Linkwitz-Riley crossover, 4 th order,
More informationWireless Music Dock - WMD Portable Music System with Audio Effect Applications
Wireless Music Dock - WMD Portable Music System with Audio Effect Applications Preliminary Design Report EEL 4924 Electrical Engineering Design (Senior Design) 26 January 2011 Members: Jeffrey Post and
More informationThis amplifier is designed for low-frequency information only and it is not capable of reproducing any mid/high-frequency information.
Thank you for purchasing the Lanzar OPTI Class-D amplifier. Rest assured you have purchased a quality product designed and engineered to give you many years of uncompromised musical service. The OPTI Class-D
More informationLM2462 Monolithic Triple 3 ns CRT Driver
LM2462 Monolithic Triple 3 ns CRT Driver General Description The LM2462 is an integrated high voltage CRT driver circuit designed for use in color monitor applications. The IC contains three high input
More informationA N E W V I S I O N O F T H E H I G H - E N D L O U D S P E A K E R EDEN ACOUSTIQUE
A N E W V I S I O N O F T H E H I G H - E N D L O U D S P E A K E R EDEN ACOUSTIQUE A B O U T E D E N Eden Acoustique was founded in 2012 and is based in Montreal, Canada. We are committed to building
More informationO P T I O W N E R ' S M A N U A L
OPTI OWNER'S MANUAL 1. Contents 2. Introduction 3. Features 4. Specifications 5. Amplifier installation 6. 7. Features and controls 8.9.System wiring 10.11. Troubleshooting OPTI OWNER'S MANUAL - 1 Thank
More informationLM1868 AM FM Radio System
LM1868 AM FM Radio System General Description The combination of the LM1868 and an FM tuner will provide all the necessary functions for a 0 5 watt AM FM radio Included in the LM 1868 are the audio power
More informationPLA3000D. user s manual. limited warranty policy. Class-D mono block car audio amplifier. Brooklyn, NY
limited warranty policy a m p l i f i e r s All Pyle products are carefully constructed and thoroughly tested before shipment. Products purchased in the USA are warranted to be free of defects in material
More informationNJU26125 Application Note Acoustical Property Adjustment Procedure Manual New Japan Radio Co., Ltd
NJU2625 Application Note Acoustical Property Adjustment Procedure Manual New Japan Radio Co., Ltd Version.02 CONTENTS.ABSTRACT...2 2.COMPOSITION OF ACOUSTIC CONTROL...2 3.BLOCK DIAGRAM...5 4.PROCEDURE
More informationThe Future of Sound. Made Perfectly Clear.
JK DI-Boxes User Guide JK1 - Active DI BOX JK2 - Stereo DI BOX JKA - Acoustic DI BOX JKP - Passive DI BOX JKT - Tone Generator The Future of Sound. Made Perfectly Clear. At KV2 Audio our vision is to constantly
More informationTPA3123 Class-D Audio Amplifier Board User s Guide
*8W@4Ω TPA33 Class-D Audio Amplifier Board User s Guide 004-009 Sure Electronics Inc. AA-AB34_Ver.0 *8W @4Ω TPA33 CLASS-D AUDIO AMPLIFIER BOARD USER S GUIDE Table of Contents Chapter. Overview.... Overview....
More informationEV-167 EVALUATION BOARD DATASHEET. AAT5101 EVAL: 2.5W Mono Class D Audio Power Amplifier. Introduction. Board Picture
Introduction EVALUATION BOARD DATASHEET The AAT5 is a high efficiency mono filter-free Class D audio power amplifier with fully differential architecture and BTL (Bridge Tied Load) output. The AAT5 evaluation
More informationDTMF receiver for telephones
DTMF receiver for telephones The is a DTMF receiver ICs developed for use in telephone answering machines, and converts 16 different types of DTMF signals into 4-bit binary serial data. It features a wide
More information2-Way Active Crossover Model XOVER-2. Xkitz.com. User s Manual. Features. Rev 5.0
2-Way Active Crossover Model XOVER-2 User s Manual Rev 5.0 Xkitz.com Features 2-way Active Crossover for driving separate woofer and tweeter amplifiers Linkwitz-Riley crossover, 4 th order, 24dB/Octave
More informationNJU26206 Application Note
Hardware Manual New Japan Radio Co., Ltd Version 1.01 CONTENTS 1. General Description...2 2. NJU26206 Block Diagram...2 3. Application Circuit Examples...3 3.1 Application circuit 1 The NJU26206 application
More informationFORMULA FX2.60 / FX4.50 / FX4.70 / FX4.100 / FX1.400 / FX1.600 / FX Installation Manual WOOD
FORMULA www.mbquart.com Installation Manual Congratulations! By purchasing an amplifier from MB Quart, you have decided on a product of the highest technical quality. MB Quart wishes you great enjoyment
More informationDescription The RA-FX1D offers 8 Mono and 8 Dual Mono selectable delays to cover a range of popular applications.
Digital Multi-Effects Module Features Low cost and high performance Digital Delay Module Superior sound quality 8 Mono and 8 Dual Mono selectable delays 24-bit, 48 khz ADC/DAC Stereo input, stereo output
More informationLM386 Low Voltage Audio Power Amplifier
Low Voltage Audio Power Amplifier General Description The is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but
More informationLM386 Low Voltage Audio Power Amplifier
LM386 Low Voltage Audio Power Amplifier General Description The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part
More informationLM V Monolithic Triple Channel 15 MHz CRT DTV Driver
220V Monolithic Triple Channel 15 MHz CRT DTV Driver General Description The is a triple channel high voltage CRT driver circuit designed for use in DTV applications. The IC contains three high input impedance,
More informationJuggling Audio Bits Audio DSP for DIY applications
Juggling Audio Bits Audio DSP for DIY applications By Harry Baggen (Elektor Netherlands Editorial) Audio hobbyists usually confine their hobby to the analogue domain, since the opportunities for doing
More informationDEMO CIRCUIT 1004 ADC DRIVER AND 7X7MM HIGH-PERFORMANCE ADC QUICK START GUIDE ADC Driver and 7x7mm High-Performance ADC DESCRIPTION
DEMO CIRCUIT 1004 QUICK START GUIDE ADC Driver and 7x7mm High-Performance ADC DESCRIPTION Demonstration circuit 1004 is a reference design featuring Linear Technology Corporation s Analog- Digital Converter
More informationClever Features, Contractor Friendly AMIS215EQ. Stereo 15 band 2/3 Octave Graphic Equalizer AMIS31EQ. Mono 31 band 1/3 Octave Graphic Equalizer
Clever Features, Contractor Friendly AMIS215EQ Stereo 15 band 2/3 Octave Graphic Equalizer AMIS31EQ Mono 31 band 1/3 Octave Graphic Equalizer Installation And Operation Manual Introduction The Australian
More informationOwner s Manual 7000 WATTS RMS WATTS RMS COMPETITION D HIGH CLASS D AMPLIFIER HIGH CLASS D AMPLIFIER MADE IN KOREA
Owner s Manual COMPETITION 7000.1D 7000 WATTS RMS HIGH CLASS D AMPLIFIER COMPETITION 12000.1D 12000 WATTS RMS HIGH CLASS D AMPLIFIER MADE IN KOREA Manual size : 150 x 210mm 2 Installation If you intend
More informationAXYS IndustryAmp PB-800
AXYS IndustryAmp PB-800 Datasheet by Geert de Vries IndustryAmp PB-800 datasheet User s Notice: No part of this document including the software described in it may be reproduced, transmitted, transcribed,
More information12kHz LIF Converter V2.43 9Mhz version
12kHz LIF Converter V2.43 9Mhz version Please Note: This document supersedes all previously released documents and drawings on the LIF subject. This is the latest and most up-to-date document at this time.
More informationBel Canto Design evo Digital Power Processing Amplifier
Bel Canto Design evo Digital Power Processing Amplifier Introduction Analog audio power amplifiers rely on balancing the inherent linearity of a device or circuit architecture with factors related to efficiency,
More informationHandy dandy little circuit #17 #17
Handy dandy little circuit #17 #17 Download # 17 in PDF There are a lot of alarm systems on the market but you might be inclined to build your own. This little project can be put together using inexpensive
More informationSpin Semiconductor FV-1 Reverb IC PN: SPN1001. Delay Memory DSP CORE. ROM and Program Control PLL. XTAL Drvr XTAL. Spin.
Featuring Virtual Analog Technology PN: SPN1001 FEATURES Integrated stereo ADC and DAC 8 internal demonstration programs + 8 external programs Easy customization with external EEPROM 3 potentiometer inputs
More informationHF Power Amplifier (Reference Design Guide) RFID Systems / ASP
16 September 2008 Rev A HF Power Amplifier (Reference Design Guide) RFID Systems / ASP 1.) Scope Shown herein is a HF power amplifier design with performance plots. As every application is different and
More informationDEMO CIRCUIT 1057 LT6411 AND LTC2249 ADC QUICK START GUIDE LT6411 High-Speed ADC Driver Combo Board DESCRIPTION QUICK START PROCEDURE
DESCRIPTION Demonstration circuit 1057 is a reference design featuring Linear Technology Corporation s LT6411 High Speed Amplifier/ADC Driver with an on-board LTC2249 14-bit, 80MSPS ADC. DC1057 demonstrates
More information20MHz to 134MHz Spread-Spectrum Clock Modulator for LCD Panels DS1181L
Rev 1; /0 0MHz to 13MHz Spread-Spectrum General Description The is a spread-spectrum clock modulator IC that reduces EMI in high clock-frequency-based, digital electronic equipment. Using an integrated
More informationACO100 Audio Controlled Oscillator
Audio Controlled Oscillator Direct audio to analog square/saw oscillator output 1V/octave pitch CV output (with calibrated post-amplifier) -2 to +2 octave modulation CV input 8-step minus fifth to plus
More informationXO-Series Crossovers OPERATING MANUAL AND USER GUIDE. XO-Series Crossovers XO-204 XO-206 XO-204X XO-206X.
XO-Series Crossovers XO-Series Crossovers OPERATING MANUAL AND USER GUIDE XO-204 XO-206 XO-204X XO-206X www.wharfedalepro.com XO-series User Manual.indd 1 2009-8-11 16:43:45 OPERATING MANUAL AND USER GUIDE
More informationHQ-31 HQ-15 USER S GUIDE SINGLE CHANNEL 31 BAND 1/3 OCTAVE GRAPHIC EQUALIZER DUAL CHANNEL 15 BAND 2/3 OCTAVE GRAPHIC EQUALIZER
HQ-31 SINGLE CHANNEL 31 BAND 1/3 OCTAVE GRAPHIC EQUALIZER HQ-15 DUAL CHANNEL 15 BAND 2/3 OCTAVE GRAPHIC EQUALIZER USER S GUIDE GENERAL INFORMATION SINGLE CHANNEL 31 BAND 1/3 OCTAVE GRAPHIC EQUALIZER WITH
More informationDXE DIGITAL CROSSOVER EQUALIZER
DXE DIGITAL CROSSOVER EQUALIZER MANUAL AND USER GUIDE DXE DIGITAL HYBRID EQ/CROSSOVER FULLY BALANCED SIGNAL FROM HEAD UNIT TO CONTROL UNIT. GREEN DOT MATRIX DISPLAY REMOTE CONTROLLER. DUAL INPUT. 5 BAND
More informationDesign Implementation Description for the Digital Frequency Oscillator
Appendix A Design Implementation Description for the Frequency Oscillator A.1 Input Front End The input data front end accepts either analog single ended or differential inputs (figure A-1). The input
More informationBRIDGEABLE MOSFET POWER AMPLIFIERS BZA-2290/BZA-2390 BZA-2490/BZA-4190 OWNER'S MANUAL
BRIDGEABLE MOSFET POWER AMPLIFIERS BZA-2290/BZA-2390 BZA-2490/BZA-4190 OWNER'S MANUAL Table of Contents Table of Contents 1 2 3~7 8 9~11 9 10~11 Troubleshooting 12 Wiring 13 Introduction & Features Introduction
More informationEPA104/254. User Manual.
EPA104/254 User Manual www.audac.eu ADDITIONAL INFORMATION This manual is put together with much care, and is as complete as could be on the publication date. However, updates on the specifications, functionality
More informationDTMF receiver for telephones
DTMF receiver for telephones The BU8874 and BU8874F are DTMF receiver ICs developed for use in telephone answering machines, and convert 16 different types of DTMF signals into 4-bit binary serial data.
More informationDigital Signal Processing
Digital Signal Processing Acknowledgements: Developed by JD Neglia, P.E., Electronics Program Director at Mesa Community College, Mesa, Arizona. Lab Summary: This laboratory experiment introduces practical
More informationEVOLUTION OF POWER AMPLIFIERS M / M M / M / M M1500.1D / M2500.1D / M4000.1D
R EVOLUTION OF AMPLIFIERS M16. / M3. M1. / M1. / M. M15.1D / M5.1D / M.1D GENERAL INSTALLATION PROCEDURE System Design The success of any car stereo system relies on several factors, such as the system
More informationStereo 3-Way Active Crossover User Manual Model K231 Sublime Acoustic, LLC
Stereo 3-Way Active Crossover User Manual Model K231 Sublime Acoustic, LLC Features Stereo 3-way Active Crossover for driving separate subwoofer, midrange and tweeter amplifiers Linkwitz-Riley crossover
More informationHIGH PERFORMANCE CAR AMPLIFIER
NS-1 HIGH PERFORMANCE CAR AMPLIFIER Digital Class-D Linkable Mono Block Amplifier Dual MOS-FET PWM Power Supply 1 Ohm Stable Load 24 db/octave - Variable Low Pass Filter 24 db/octave - Variable Subsonic
More informationURANIUM-SERIES AMPLIFIER
URANIUM-SERIES AMPLIFIER OWNER S MANUAL GZUA 2.250SQ-PLUS GZUA 4.150SQ-PLUS GZUA 6.200SQ-PLUS Common Features 2 Ohm stable stereo (GZUA 4.150SQ-PLUS & 6.200SQ-PLUS) 1 Ohm stable stereo (GZUA 2.250SQ-PLUS)
More information参考資料 PAM8012. Pin Assignments. Description. Features. Applications. A Product Line of. Diodes Incorporated
MONO 2.0W ANTI-SATURATION CLASS-D AUDIO POWER AMPLIFIER with POWER LIMIT Description Pin Assignments The is a 2.0W mono filterless class-d amplifier with high PSRR and differential input that reduce noise.
More informationExclusive Technology Feature. Integrated Driver Shrinks Class D Audio Amplifiers. Audio Driver Features. ISSUE: November 2009
ISSUE: November 2009 Integrated Driver Shrinks Class D Audio Amplifiers By Jun Honda, International Rectifier, El Segundo, Calif. From automotive entertainment to home theater systems, consumers are demanding
More informationMediaMatrix X-Frame 88
S P E C I F I C A T I O N S MediaMatrix X-Frame 88 Description The X-Frame 88 is a fully programmable, fully configurable, Digital Signal Processor (DSP) based audio processing and control system. It includes
More informationPower Amplifier Linearization using RF Pre-Distortion JUNE, 2012
Power Amplifier Linearization using RF Pre-Distortion JUNE, 2012 1 PA Linearization Overview General principles Overview/Block Diagram of DPD and RFPD RFPAL System architecture & Implementation Predistortion
More informationFM/AM/SW/LW Multi Band Single Radio Chip C9620
1. Description C9620 is a hand-tune digital display and free debugging single radio chip with FM / AM / SW / LW multi-band. Thanks to its monolithic integrated frequency synthesizers,radio frequency front
More informationAVL-10000T AUDIO VIDEO LINK TRANSMITTER TECHNICAL MANUAL
AVL-10000T AUDIO VIDEO LINK TRANSMITTER TECHNICAL MANUAL Document : AVL-10000T Version: 1.00 Author: Henry S Date: 25 July 2008 This module contains protection circuitry to guard against damage due to
More informationFilterless 3W Class- D Mono Audio Amplifier
Preliminary Datasheet LPA00 Filterless 3W Class- D Mono Audio Amplifier General Description The LPA00 is a 3W, class-d audio amplifier. It offers low THD+N, allowing it to achieve high-quality Power Supply
More informationHigh Performance Monoblock Amplifiers
GTA High Performance Monoblock Amplifiers Specifications Introduction Thank you for choosing Boston Acoustics and congratulations, you ve made the right choice. You re now equipped for the open road. Your
More informationHigh-definition sound processor
High-definition sound processor The BA3884F and BA3884S are sound processor ICs that perform phase and harmonic compensation on audio signals to accurately reproduce the rise section of audio signals that
More informationAN-1370 APPLICATION NOTE
APPLICATION NOTE One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Design Implementation of the ADF7242 Pmod Evaluation Board Using the
More informationPLBA330FRD PLBA430FRD PLBA530FRD
Compact Class D Full Range Hybrid Amplifier USER' S MANUAL www. pyleaudio. com www. pyleaudio. com PLBA330FRD PLBA430FRD PLBA530FRD FEATURES CLASSD DESIGN Compact classd full range hybrid amplifer.high
More informationINTRODUCTION FEATURES SPECIFICATIONS. Built-in Crossover
INTRODUCTION Congratulations on your purchase of a LEGACY ICON Car Amplifier. The unit is the result of an extensive engineering project to create the finest automotive high fidelity product available.
More informationSigmaDSP processors for audio signal processing
SigmaDSP processors for audio signal processing Miloš Ježek, Jozef Puttera, Roman Berešík Armed Forces Academy of gen. M. R. Štefánik, Department of Electronics, Demänová 393, 03106 Liptovský Mikuláš 6,
More informationScreening Audiometer
EE89 Electronic Design Lab (EDL) Report, EE Dept, IIT Bombay, December, 00 Screening Audiometer Group No. D0 Mahim Agrawal (0D000) < mahim@ee.iitb.ac.in > Ashok Kumar Bhardwaj (0D00) < ashokkb@ee.iitb.ac.in
More informationEXOS TM. User s Manual. Electronic Crossover for the STATEMENT. Electrostatic Hybrid High Resolution Loudspeaker System. electronic crossover
EXOS TM User s Manual Electronic Crossover for the STATEMENT e v o l u t I o n 2 Electrostatic Hybrid High Resolution Loudspeaker System electronic crossover -8-4 0 4 balanced on 50Hz CONTOUR db MUTE BASS
More informationMONAURAL 4.5W Non-Clip DIGITAL AUDIO POWER AMPLIFIER. ShenZhen Nsiway Technology Co., Ltd 2012,10. Nsiway 1
NS4158 Data Sheet V1.0 ShenZhen Nsiway Technology Co., Ltd 2012,10 Nsiway 1 General Description NS4158 is a class D can switch work mode, with the function of preventing distortion, low EMI, no filter,
More informationAudio in ecall and Cluster. Clancy Soehren MSA Applications FAE Summit 2016
Audio in ecall and Cluster Clancy Soehren MSA Applications FAE Summit 2016 1 Agenda Audio Architecture Audio Quality Diagnostics and Protection Efficiency EMI/EMC 2 Audio Architecture 3 Cluster Mid-Range
More informationImproving Loudspeaker Signal Handling Capability
Design Note 04 (formerly Application Note 104) Improving Loudspeaker Signal Handling Capability The circuits within this application note feature THAT4301 Analog Engine to provide the essential elements
More information3W Stereo Class-D Audio Power Amplifier BA Data Sheet. Biforst Technology Inc. Rev.1.1,
3W Stereo Class-D Audio Power Amplifier BA20550 Data Sheet Rev.1.1, 2007.02.12 Biforst Technology Inc. 3W Stereo Class-D Audio Power Amplifier BA20550 GENERAL DESCRIPTION The BA20550 is a 5V class-d amplifier
More informationLM2412 Monolithic Triple 2.8 ns CRT Driver
Monolithic Triple 2.8 ns CRT Driver General Description The is an integrated high voltage CRT driver circuit designed for use in high resolution color monitor applications. The IC contains three high input
More informationAMPLIFIERS. Bi2200Tx Bi4200Fx. Bi1400Mx Bi2400Mx Bi3000Mx
LIMITED WARRANTY Bass Inferno warrants any products purchased in the U.S.A. from an authorized Bass Inferno dealer. All products are warranted to be free from defects in material and workmanship under
More informationMic Mate Pro. User Manual
R Mic Mate Pro User Manual Mic Mate Pro Features Congratulations and thank you for purchasing the MXL Mic Mate Pro. This device is designed to minimize your setup for recording and allow for professional
More informationDCT-9 Universal Digital/Analog Audio Converter
DCT-9 Universal Digital/Analog Audio Converter Operation Manual DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility
More informationLoudspeaker Active Spectral Divider Design Project Team 3: Aaron, Sam, Brandon, & Matt
Loudspeaker Active Spectral Divider Design Project Team 3: Aaron, Sam, Brandon, & Matt Project Report Evaluation Team ID: 03 Team Member 1.0 2.0 3.0 4.0 App Tech* TOTAL Aaron Barnes Sam DiCarlo Brandon
More informationPower Limited Stereo Filter-less Class-D Audio Amplifier with Headphone Driver. Description. Product ID Package Packing Comments
2.5W/CH@5V Power Limited Stereo Filter-less Class-D Audio Amplifier with Headphone Driver Features Supply voltage range: 3.0 V to 5.5 V 2.5W power limit function 10mA static operation current
More informationRXA 1000 D CLASS D MONO AMPLIFIER USER S MANUAL
RXA 1000 D CLASS D MONO AMPLIFIER USER S MANUAL Please read the user s manual carefully before the installation and the first operation of the amplifier. SPECIFICATIONS Output Power RMS Output Power Max.
More informationThe attached document closely follows the sections defined in the functional specifications for ease of reference.
!"# $%& ' March 2, 2004 Dr. Lakshman One School of Engineering Science Simon Fraser University Burnaby, BC, V5A 1S6 Re: ENSC 440 Design Specification for Digital Audio Input Speakers Dear Dr. One, Attached
More informationSound Skulptor MC624 User manual
Sound Skulptor MC624 User manual 1. Overview The MC624 lets you select one out of six stereo line level audio sources, adjust the level and route it to one out of four stereo amplified monitor pairs. The
More informationMA40E Mini Amplifier with DSP
MA40E Mini Amplifier with DSP Clearly better sound MA40E Front Panel MA40E Rear Panel General Description The MA40E is a very compact stereo amplifier of advanced design, intended for integration into
More informationF1 Model 812 Flexible Array Loudspeaker
F1 Model 812 Flexible Array Loudspeaker Product Description The Bose F1 Model 812 Flexible Array Loudspeaker is the first powered portable loudspeaker that lets you control its vertical coverage pattern.
More informationSet Up Guide. Tuning Guide
Set Up Guide First, before anything else you need to ensure the audio connections are correct and that you have tested and documented the maximum useable output voltage and volume position of the source
More informationInstruction Manual for Models
Instruction Manual for Models ADP700.1 ADP100.1 ADP1000.4 ADP1500.6 ADMP500.1 ADMP00. ADMP400.4 ADMP900.6 INDEX Technology Pages 1, ADP Specifications Page 3 ADMP Specifications Page 4 ADP 700.1 and ADP100.1
More informationKeywords: GPS, receiver, GPS receiver, MAX2769, 2769, 1575MHz, Integrated GPS Receiver, Global Positioning System
Maxim > Design Support > Technical Documents > User Guides > APP 3910 Keywords: GPS, receiver, GPS receiver, MAX2769, 2769, 1575MHz, Integrated GPS Receiver, Global Positioning System USER GUIDE 3910 User's
More information2016 NEW PRODUCT GUIDE
VIP SMART KEYBOARD CONTROLLER WITH MACKIE/HUI CONTROL Integrated 4.3-inch high-res full-color screen with dedicated interface buttons Screen provides 1:1 real-time feedback of plugin parameters Includes
More information3W/CH Stereo Filter-less Class-D Audio Amplifier with Headphone Driver. Description. Product ID Package Packing Comments
3W/CH Stereo Filter-less Class-D Audio Amplifier with Headphone Driver Features Supply voltage range: 3.0 V to 5.5 V 10mA static operation current
More informationEvaluation Board for Filterless Class-D Audio Amplifier EVAL-SSM2335
Evaluation Board for Filterless Class-D Audio Amplifier EVAL-SSM2335 FEATURES Single-ended and differential input capability User-friendly interface connection Optimized EMI suppression filter assembled
More informationA DSP IMPLEMENTED DIGITAL FM MULTIPLEXING SYSTEM
A DSP IMPLEMENTED DIGITAL FM MULTIPLEXING SYSTEM Item Type text; Proceedings Authors Rosenthal, Glenn K. Publisher International Foundation for Telemetering Journal International Telemetering Conference
More informationLM390 1W Battery Operated Audio Power Amplifier
LM390 1W Battery Operated Audio Power Amplifier General Description The LM390 Power Audio Amplifier is optimized for 6V 7 5V 9V operation into low impedance loads The gain is internally set at 20 to keep
More informationModel Owner s Manual. Active 3-Way Studio Monitor System.
Model 4288 Active 3-Way Studio Monitor System Owner s Manual www.chrispelonisspeakers.com Model 4288 The Model 4288 is a 3-way active monitoring system for a Full range listening experience. Similarly
More informationMAXXSPEECH PERFORMANCE ENHANCEMENT FOR AUTOMATIC SPEECH RECOGNITION
MAXXSPEECH PERFORMANCE ENHANCEMENT FOR AUTOMATIC SPEECH RECOGNITION MAXXSPEECH Waves MaxxSpeech is a suite of advanced technologies that improve the performance of Automatic Speech Recognition () applications,
More informationDSP Amplifier. Installation Manual DSP3-700
DSP3-700 Amplifier Installation Manual DSP3-700 Table of Contents Introduction 1 Amplifier Presets 2 Specifications 4 What s Included 5 Wire Recommendations 5 About the DSP3-700 6 Startup 6 Loading a DSP
More informationTECHNICAL WHITE PAPER THE BENEFIT OF USING SPEAKER TUNINGS FOR COMMERCIAL LOUDSPEAKERS
TECHNICAL WHITE PAPER THE BENEFIT OF USING SPEAKER TUNINGS FOR COMMERCIAL LOUDSPEAKERS EXECUTIVE SUMMARY The use of speaker tunings is commonplace in high-performance environments that require line arrays
More information10-pin, 24-Bit, 192 khz Stereo D/A Converter for PCM Audio. Multi-level Sigma-delta DAC. Interpolation. Filter. Multi-level Sigma-delta DAC
10-pin, 24-Bit, 192 khz Stereo D/A Converter for PCM Audio GENERAL DESCRIPTION The is a low cost 10-pin stereo digital to analog converter. The can accept I²S serial audio data format up to 24-bit word
More information