PTH03010Y & PTH05010Y PTH12010Y. Vin increasing Vin decreasing PTH05010Y PTH12010Y PTH12010Y
|
|
- Ruby Lucas
- 5 years ago
- Views:
Transcription
1 PTHxx00Y 3.3/5/ Rev _3 of 5 Total Power: Watts # of Outputs: Single Special Features bus termination output (output the system V REF ) 5 A output current 3.3, 5, or Vdc input voltage DDR and QDR compatible ON/OFF inhibit ( for standby) Under-voltage lockout Operating temperature range: -40 C to +5 C Efficiencies up to 9% Output overcurrent protection (non-latching, auto-reset) Point-of-Load-Alliance (POLA) compatible Available RoHS compliant Year Warranty Specifications Input Input current: No load 0 ma Input voltage range: Undervoltage lockout: Input capacitance: (See Note 3, page 3) Remote ON/OFF: & Vdc Vdc Vdc.45 V typ.,.0 V max..0 V min.,.40 V typ V typ., 4.45 V max V min., 3.0 V typ. 9.5 V typ., 0.4 V max..0 V min., 9.0 V typ. 40 µf 50 µf Positive logic All specifications are typical at nominal input, V REF =.5 V, full load at 5 C unless otherwise stated C in, C o, C C o = typical value Safety UL/cUL CASA-C. No File No. E404 TÜV Product Service (EN0950) Certificate No. B CB Report and Certificate to IEC0950, Certificate No. US/9/UL
2 Specifications Continued Rev _3 of 5 Output Output current: (over V REF range) (See Note, page 3) Tracking range for V REF : Tracking tolerance to V REF ( - V REF ): (over line, load & temperature) & ± 5 A ± A V -0 mv to + 0 mv Ripple and noise: 0 MHz bandwidth 0 mv pk-pk Load transient response: (See Note 4, page 3) Output capacitance: Non-ceramic values (See Notes 4 & 5, page 3) 30 µs settling time Overshoot/undershoot 30 mv typ. 40 µf typ.,,00 µf max. 40 µf typ.,,00 µf max. 940 µf typ.,,00 µf max. Ceramic values (See Note 4, page 3) 00 µf typ., 300 µf max. 00 µf typ., 300 µf max. 400 µf typ., 00 µf max. (See Note, page 3) ESR (non-ceramic) 4 mω min. General Specifications Efficiency: lo = 0 A Insulation voltage: Switching frequency: Approvals and standards: Material flammability: % typ. % typ. 5% typ. Non-isolated khz khz khz EN0950 UL/cUL0950 UL94V-0 Dimensions: (L x W x H) 34.0 x 5.5 x 9.00 mm.30 x 0.0 x in Weight: 3. g (0.3 oz) MTBF: Telcordia SR-33,000,000 hours Environmental Specifications Thermal Performance: (See Note, page 3) Operating ambient, temperature Non-operating MSL ( Z suffix only): JEDEC J-STD-00C Level 3 Protection Overcurrent threshold (auto reset): & -40 C to +5 C -40 C to +5 C.5 A typ. 0.0 A typ.
3 Rev _3 3 of 5 Ordering Information Output Power (max) Input Voltage Range Output Currents Min Max Efficiency (max) Model Numbers (, 9) W Vdc Vdc 0 A ± 5 A % W Vdc Vdc 0 A ± 5 A %. W Vdc Vdc 0 A ± 5 A 5% Part Number System with Options P T H Y A S T Product Family Point of Load Alliance Compatible Input Voltage 03 = 3.3 V, 05 = 5 V and = V Output Current 0 = 5 A Mechanical Package Always 0 Packaging Options No Suffix = Trays T = Tape and Reel () Mounting Option () D = Horizontal Through-Hole (RoHS /) H = Horizontal Through-Hole (RoHS 5/) S = Surface-Mount Solder Ball (RoHS 5/) Z = Surface-Mount Solder Ball (RoHS /) Pin Option A = Through-Hole Std. Pin Length (0.40 ) A = Surface-Mount Tin/Lead Solder Ball Output Voltage Code Y = DDR Module Notes Rating is conditional on the module being soldered to a 4 layer PCB with oz. copper. See the SOA curves or contact the factory for appropriate derating. This control pin has an internal pull-up to the input voltage. If it is left open-circuit the module will operate when input power is applied. A small low-leakage (< 00 na) MOSFET is recommended for control. For further information, consult Application Note. 3 An input capacitor is required for proper operation. The capacitor must be rated for a minimum of 00 ma rms of ripple current. 4 The typical value of external output capacitance value ensures that meets the specified transient performance requirements for the memory bus terminations. Lower values of capacitance may be possible when the measured peak change in output current is consistently less than 3 A. Test conditions were 5 A/µs load step, -.5 A to +.5 A. 5 This is the calculated maximum. The minimum ESR limitation will often result in a lower value. Consult Application Note for further details. This is the typical ESR for all the electrolytic (non-ceramic) output capacitance. Use mω as the minimum when using max-esr values to calculate. Tape and reel packaging only available on the surface-mount versions. To order Pb-free (RoHS compatible) surface-mount parts replace the mounting option S with Z, e.g. PTHXX00YAZ. To order Pbfree (RoHS compatible) through-hole parts replace the mounting option H with D, e.g. PTHXX00YAD. 9 NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at to find a suitable alternative.
4 Characteristic Data Rev _3 4 of Nat conv 00 LFM 00 LFM 0 4 Nat conv 00 LFM 00 LFM AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure - Safe Operating Area = 3.3 V, V REF =.5 V, Iout = 5 A (See Note A) Figure - Safe Operating Area = V, V REF =.5 V, Iout = A (See Note A) 00 V DDQ VREF EFFICIENCY (%) V 5.0V.0V Standby GND k % k % C in (Required) Q BSS3 (Optional) PTHxx00Y (Top View) Co Low-ESR (Required) + Co Ceramic (Optional) VTT Termination Island SSTL- Data/ Address/ Bus Con hf-ceramic Figure 3 - Efficiency vs Load Current V REF =.5 V (See Note B) Figure 4 - Standard Application Notes A B SOA curves represent the conditions at which internal components are within the Emerson Network Power derating guidelines. Characteristic data has been developed from actual products tested at 5 C. This data is considered typical data for the converter.
5 Mechanical Drawings 0.00 (.5) 0.5 (3.) 0.5 (3.) 0.35 (9.5).30 (34.0) 0.5 (5.) 0.00 (.5) 0.40 (3.55) ø0.040 (.0) 5 Places Rev _3 5 of 5 Americas 50 Van Allen Way Carlsbad, CA 900 USA Telephone: Facsimile: (.0) 0.0 (5.5) 0.00 (.) (Standoff Shoulder) Lowest Component 0.00 min. (0.5) Bottom side Clearance Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 LX United Kingdom Telephone: +44 (0) 34 4 Facsimile: +44 (0) Dimensions in Inches (mm) Tolerances (unless otherwise specified) Places (0.) 3 Places 0.00 (0.5) 0.00 (.5) Pin Connections Pin No. Pin Pin Pin 3 Pin 4 Pin (3.) 0.5 (3.) 0.35 (9.5) Function Ground Inhibit* Vo sense TOP VIEW.30 (34.0) 0 9 Dimensions in Inches (mm) Tolerances (unless otherwise specified) Places (0.) 3 Places 0.00 (0.5) TOP VIEW Figure 5 - Plated Through-Hole 0.5 (5.) Figure - Surface-Mount Pin No. Pin Pin Pin Pin 9 Pin (.5) (.0) 0.0 (5.5) Pin Connections cont. Function Ground V REF (9.00) MAX. SIDE VIEW (9.00) max.* SIDE VIEW Host Board *After solder reflow on customer board Solder Ball ø0.040 (.0) 0 Places Lowest Component 0.00 min. (0.5) Bottom side Clearance Host Board * Denotes negative logic: Open = Normal operation Ground = Function active Asia (HK) 4/F, Lu Plaza Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: Facsimile: +5 3 For global contact, visit: While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 00 Emerson Electric Co.
PTH03060Y & PTH05060Y PTH12060Y. Vin increasing Vin decreasing PTH05060Y PTH12060Y PTH12060Y
3.3/5/ of 5 Total Power: Watts # of Outputs: Single Special Features V TT bus termination output (output the system V REF ) 0 A output current 3.3, 5 or Vdc input voltage DDR and QDR compatible ON/OFF
More information1 V/ms V typ. Track input voltage: Pin 8 (See Note 6, page 3) ± 0.3 Vin
1 Vin 1 of 5 Total Power: Watts # of Outputs: Single Special Features A output current 1 V input voltage Wide-output voltage adjust 1. Vdc - 5.5 Vdc for suffix W & 0.8 Vdc - 1.8 Vdc for suffix L Auto-track
More information1 V/ms Undervoltage lockout: V typ. Track input voltage: Pin 8 (See Note 6, page 3) ± 0.3 Vin
PTH0 SERIES PTH0 Vin Total Power: 55 Watts # of Outputs: Single Special Features 0 A output current V input voltage Wide-output voltage adjust. Vdc - 5.5 Vdc for suffix W & 0.8 Vdc -.8 Vdc for suffix L
More informationElectrical Specifications
Series 0 Watts C-Class Non-Isolated SXX06E Rev. 08.0.06 Page of 2 of Total Power: 0 Watts Input Voltage: 3-3.8 Vdc No. of s: Single Special Features 0 A current rating Adjustable output voltage: 0.9 -.
More informationPTH Vin single output. DC/DC CONVERTERS POLA Non-isolated 1. NEW Product
PTH0 DC/DC CONVERTERS POLA Non-isolated 0 A output current V input voltage Wide-output voltage adjust. Vdc to 5.5 Vdc for suffix W and 0.8 Vdc to.8 Vdc for suffix L Auto-track sequencing* Margin up/down
More informationElectrical Specifications
Single & Quad output 1 of 5 Total Power: 80-110 W Input Voltage: 85-264 Vac 120-370 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Overvoltage and short circuit protection
More informationLDO03C SERIES. Single Output. LDO03C Series 3 A DC-DC C Class Non-Isolated DC/DC Converter [ 2 YEAR WARRANTY ]
LDO03C SERIES Single Output 3 A current rating Input voltage range 3-13.8 V Adjustable output voltage 0.59-5.1 V Optional 3-pin model factory set Optional 5-pin model factory set with power good option
More informationEIGHTH-BRICK SERIES. Single Output Value Products. Special Features
EIGHTH-BRICK SERIES Embedded Power for Business-Critical Continuity 1 of 31 EIGHTH-BRICK SERIES Total Power: 50 W Input Voltage: 36-75 VDC # of Outputs: Single Special Features High efficiency topology
More informationEIGHTH-BRICK SERIES. 24 V Input, Single Output. Special Features
EIGHTH-BRICK SERIES Embedded Power for Business-Critical Continuity EIGHTH-BRICK SERIES 1 of 15 Total Power: 66 W Input Voltage: 18-36 VDC # of Outputs: Single Special Features High efficiency topology
More informationQUARTER-BRICK QUARTER-BRICK SERIES. Single Output Ultra Products. Special Features
QUARTER-BRICK SERIES Embedded Power for Business-Critical Continuity QUARTER-BRICK SERIES 1 of 28 Total Power: 150-200W Total Power: -- Input Voltage: 36-75Vdc Input Voltage: -- # of Outputs: Single Output
More informationElectrical Specifications
Up to 6000 Watts 1 of 6 Total Power: Up to 6000 W Input Voltage: 85-264 Vac # of s: Single + Aux : 24 V & 48 V Special Features Rack mounted chassis (1U, 19 ) 3 hot pluggable rectifiers per 1U chassis,
More informationPTV Vin single output. DC-DC CONVERTERS POLA Non-isolated 1. NEW Product
DC-DC CONVERTERS POL Non-isolated 1 16 output current 12 V input voltage Wide-output voltage adjust 1.2 Vdc to 5.5 Vdc for suffix W and 0.8 Vdc to 1.8 Vdc for suffix L uto-track sequencing* Pre-bias start-up
More informationElectrical Specifications. Adjustment range Main output ± 5% Total regulation (line and load) ± 2.0% ± 5.0% Turn-on 120 Vac Input 2.0 s max.
POWER Data Sheet NLP250 Series Single Output Total Power: 250 W Input Voltage: 85-264 Vac # of Outputs: Single SPECIAL FEATURES Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air
More informationElectrical Specifications
usiness-ritical ontinuity L Watts onvection/onduction Mounting Rev. 1..1_11 L Series 1 of 7 Total Power: W # of Outputs: Single Output: 1,, 8 V Special Features W Full power at elevated temperatures Wide
More informationSMT20C SERIES. Single Output TÜV. SMT20C Series 20 A DC-DC Converter C Class Non-Isolated
SMT20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
More informationElectrical Specifications
usiness-ritical ontinuity L Watts onvection/onduction Mounting Rev. 1.31.11_11 L Series 1 of 7 Total Power: W # of Outputs: Single Output: 1,, 8 V Special Features 1 VD / W output power Wide Operating
More informationSIL20C SERIES. Single Output. SIL20C Series 20 A DC-DC Converter C Class Non-Isolated
SIL20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
More informationEXQ125 48V SERIES. Single Output. Special Features
EXQ125 48V SERIES Embedded Power for Business-Critical Continuity EXQ125 48V SERIES 1 of 36 Total Power: 1 W Input Voltage: 33-75 VDC # of Outputs: Single Special Features High efficiency topology, 91%
More informationQUARTER-BRICK SERIES. Dual Output Value Products. Special Features
QUARTER-BRICK SERIES Embedded Power for Business-Critical Continuity QUARTER-BRICK SERIES 1 of 32 Total Power: 116 W Input Voltage: 36-75 VDC # of Outputs: Dual Special Features Two independent outputs
More informationElectrical Specifications
POWER Data Sheet NFS110 Medical Series Single and quad output Total Power: 80-110 W Input Voltage: 100-240Vac 127-357 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Medical,
More informationSingle negative output
SIL25C SERIES Single negative output Trim range (-4.5 Vdc to -5.5 Vdc) High power density design means reduced board space requirement Remote sense Power good output signal (open collector) Operating ambient
More informationPOWER DS Watts Distributed Power System. Data Sheet
POWER Data Sheet Distributed Power Bulk Front-End Total Output Power: 2900 Watts +3.3 Vdc Stand-by Output Wide Range Input Voltage: 180-264 Vac DS2900 2900 Watts Distributed Power System Special features
More informationElectrical Specifications Input
3000 Watts 1 of 8 Distributed Power Bulk Front-End Single Output Special Features 3000 W output power 40 W/cu-in Optional customer provided air 1U x 3U form factor N+1 Redundant Hot-swap Internal OR-ing
More informationQUARTER-BRICK SERIES Single Output Performance Products
Quarter-Brick Series 100 A DC-DC QUARTER-BRICK SERIES Single Output Performance Products High efficiency topology High output current Low profile, 0.300 inch (7.62 mm) height Unprecedented useable output
More informationQME48T40 DC-DC Series Data Sheet VDC Input; A Output
Applications Telecommunications Data communications Wireless communications Servers, Workstations Benefits High efficiency no heat sink required Higher current capability at 70 ºC than most competitors
More informationElectrical Specifications
POWER Data Sheet NLP65 Series Single, Dual and Triple Output Total Power: 65-75 W Input Voltage: 85-264 Vac 120-370 Vdc* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal input 3 x 5 footprint
More informationPOWER. NLP40 Series. Single, Dual and Triple Output. Data Sheet
POWER Data Sheet NLP40 Series Single, Dual and Triple Output Total Power: 40-50 W Input Voltage: 90-264 Vac 120-370 Vdc # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package
More informationPOWER DS1100PED Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS1100PED 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 1100 W output power High-power
More informationPOWER DS750PED. 750 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS750PED 750 Watts Distributed Power System Front-end Bulk Power Total Output Power: 750 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 750 W output power High-power and
More informationQUARTER-BRICK SERIES Single Output Value Products
Quarter-Brick Series 50 A DC-DC QUARTER-BRICK SERIES Single Output Value Products High efficiency topology High output current Low profile, 0.300 inch (7.62 mm) height Unprecedented useable output power
More informationNetworking Computers and Peripherals Telecommunications
The 0RCY-60U12x is part of the isolated DC/DC converters that operate from a wide input range (18 VDC - 75 VDC) and can cover both 24 Vin and 48 Vin input range. These units will provide up to 84 W of
More informationThe 0RQB-C5U54x is an isolated DC-DC converter that operates from a nominal 24 VDC, 48 VDC source.
The 0RQB-C5U54x is an isolated DC-DC converter that operates from a nominal 24 VDC, 48 VDC source. This unit will provide up to 162 W of output power from a nominal 24 VDC, 48 VDC input. This unit is designed
More informationPOWER. LGA50D Standard Profile Series Dual O/P Non-isolated 50 A Digital DC/DC Converter. Electrical Specifications. PROPOSED PRODUCT Data Sheet
POWER PROPOSED PRODUCT Data Sheet Total Current: 50 A (single) 25 A (dual) Input Voltage: 7.5-14 Vdc Variable Output: 0.6-5.0 V (standard profile) LGA50D Standard Profile Series Dual O/P Non-isolated 50
More informationSRPE-50E1A0 Non-Isolated DC-DC Converter
SRPE-50E1A0 Non-Isolated DC-DC Converter The Bel SRPE-50E1A0 is part of the non-isolated dc to dc converter Power Module series. The modules use a Vertical SMT package. These converters are available in
More informationPOWER DS500SDC. 500 Watts Distributed Power System. Data Sheet
POWER Data Sheet Front-end Bulk Power Total Output Power: 500 W continuous Wide Input Voltage: -36 to -72 Vdc DS500SDC 500 Watts Distributed Power System SPECIAL FEATURES 500 W output power High power
More informationPOWER CSV900BP. 900 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSV900BP 900 Watts Distributed Power System Front-end Bulk Power Total Output Power: 900 W Input Voltage: 90 to 264 Vac SPECIAL FEATURES 900 W output power U power supply Active Power
More informationSIL20C2 Series Single Output
SIL20C2 Series 20 A DC-DC SIL20C2 Series Single Output Adjustable output voltage (0.59-5.1 V, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for
More information0.8V Vin Single output
SIL15E-12V SERIES 0.8V - 3.63Vin Single output 15A Current rating Input voltage range: 10.0V - 14.0V Output voltage range: 0.8V - 3.63V Ultra high efficiency: 94% @ 12Vin and 3.3Vout Extremely low internal
More informationSMT10E Series. 3.0 Vin to 5.5 Vin Single output. SMT10E Series 10 A DC-DC Converter E Class Non-Isolated
SMT10E Series 3.0 Vin to 5.5 Vin Single output 10 A Current rating Input voltage range: 3.0 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely
More information(DOSA) VDC, 5.5 A.
Features Industry-standard pinout Output: 15 V at 5.5 A, 82.5W max. No minimum load required Low height - 0.374 (9.5mm) max. Basic Insulation Withstands 100 V input transients Fixed-frequency operation
More informationPOWER DS1100PED Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS1100PED 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100 W continuous Wide Input Voltage: 90-264 Vac SPECIAL FEATURES 1100 W output power High-power
More informationPOWER DS3000PE High Line: 3000 W Low Line: 1350 W. Electrical Specifications. Data Sheet
POWER Data Sheet DS3000PE High Line: 3000 W Low Line: 1350 W Distributed Power Bulk Front-end Single Ouptut Standard Total Output Power: 3000 W continuous 208 Vac to 264 Vac, 3000 W 1 90 Vac to 140 Vac,
More informationPOWER CSV2000BP Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSV2000BP 2000 Watts Distributed Power System Front-end Bulk Power Total Output Power: 2000 W Input Voltage: 80 to 265 Vac Special features 2000 W output power U power supply Active Power
More informationPOWER. CPS250-M Series. 250 Watt AC-DC Power Supplies. Data Sheet. Total Power: 250 Watts Input Voltage: V # of Outputs: Single
POWER Data Sheet CPS50-M Series 50 Watt AC-DC Power Supplies Total Power: 50 Watts Input Voltage: 90-64 V # of Outputs: Single SPECIAL FEATURES Designed for forced air and natural convection cooling Medical
More informationElectrical Specifications. > 0.9 beginning at 20% load. ITHD 10% Leakage current. Ordering Information
POWER Data Sheet DS2000SPE Series 2000 Watts Distributed Power System Front-end Bulk Power Total Output Power: 2000 W continuous at high line 90-140 V &180-264 Vac Operation SPECIAL FEATURES 2000 W output
More informationPOWER DS250SPE. 250 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS250SPE 250 Watts Distributed Power System Front-end Bulk Power Total Output Power: 250 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 250 W output power High power and
More informationPOWER DS1600SPE Watts Distributed Power System. Electrical Specifications. Ordering Information. Data Sheet
POWER Data Sheet DS1600SPE 1600 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1600 W continuous at high line Wide Range Input Voltage: 90-264 Vac SPECIAL FEATURES 1600 W output
More informationPOWER. CPS250-M Series. 250 Watt AC-DC Power Supplies. Data Sheet. Total Power: 250 Watts Input Voltage: V # of Outputs: Single
POWER Data Sheet CPS50-M Series 50 Watt AC-DC Power Supplies Total Power: 50 Watts Input Voltage: 90-6 V # of Outputs: Single SPECIAL FEATURES Designed for forced air and natural convection cooling Medical
More informationCXA20 SERIES. Single and dual output. Special Features
CXA20 SERIES Single and dual output Embedded Power for Business-Critical Continuity CXA20 SERIES 1 of 21 Total Power: 20 W Input Voltage: 18-75 VDC # of Outputs: Single and Dual Special Features 4:1 input
More informationISOLATED DC/DC CONVERTERS 48 Vdc Input 2.5 Vdc /20 A Output, 1/8 Brick Converter
0RCB-60T02x Rev.B RoHS Compliant File Rev.A Isolated Output Over-Voltage Shutdown High Efficiency OCP/SCP High Power Density Over Temperature Protection Fixed Frequency (300 khz) Remote On/Off Low Cost
More informationMAX. OUTPUT POWER 24/48/72/96/110 VDC 5 VDC 6 A 30 W 82% 0RQB-30Y05L. 0 R QB - 30 Y 05 L y. Output Power. Input Range
The 0RQB-30Y05L is an isolated DC/DC converter providing 30 W of output power from a wide input range (24 V, 48 V, 72 V, 96 V, 110 V typical). Standard features include remote on/off, input under-voltage
More informationCLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
More information360 WATT MTW SERIES DC/DC CONVERTERS
Description The 4:1 Input Voltage 360 Watt Single MTW DC/DC converter provides a precisely regulated dc output. The output voltage is fully isolated from the input, allowing the output to be positive or
More information500 WATT MXW SERIES DC/DC CONVERTERS
4:1 Input voltage range High power density Small size 2.4 x 2.5 x 0.52 Efficiency up to 95.7% Excellent thermal performance with metal case Over-Current and Short Circuit Protection Over-Temperature protection
More informationPOWER DS1100SLPE Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS1100SLPE 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 1100 W output power High power
More informationOrdering Information PT5521 =3.3 Volts PT5522 =2.5 Volts PT5523 =2.0 Volts PT5524 =1.8 Volts PT5525 =1.5 Volts PT5526 =1.2 Volts PT5527 =1.
PT552 Series 1.5-A 5-V/3.3-V Input Adjustable Integrated Switching Regulator SLTS147A (Revised 1/5/21) Features Single-Device: 5V/3.3V Input DSP Compatible 89% Efficiency Small Footprint Space-Saving package
More information0RCY-F0S10x Isolated DC-DC Convert
0RCY-F0S10x Isolated DC-DC Convert The 0RCY-F0S10x is an isolated DC/DC converter that operate from a nominal 50 V/54 V source. This converter is intended to provide isolation and step down to generate
More informationISOLATED DC/DC CONVERTERS 24/48/72/96/110Vdc Input, 5 Vdc/6A Output. Bel Power Inc., a subsidiary of Bel Fuse Inc. 0RQB-30Y05L RoHS Compliant Rev.
0RQB-30Y05L RoHS Compliant Rev.D Features Isolated Input under-voltage protection High Efficiency Output over-voltage protection Hold-up function Over current and short circuit protection Remote ON/OFF
More informationCool Power Technologies
Cool Power Technologies Sixteenth-Brick Isolated DC/DC Converter Features Industry-standard pinout Wide input voltage range: 36 75Vin Output: 3.3 V at 12 A, 40W max. No minimum load required Low height
More information10 Watts. AEE00-12Vin. Electrical Specs. Special Features. Environmental. Safety. Input Voltages: Input
10 Watts AEE00-12Vin Total Power: Input Voltages: No. of Outputs: 10 Watts 12V Single and Dual Electrical Specs Input Input range Efficiency 9 to 18 VDC 78% typical (3.3V) Output Voltage tolerance ±1.0%
More informationPOWER CSV1300BP Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSV300BP 300 Watts Distributed Power System Front-end Bulk Power Total Output Power: 300 W continuous at high line Input Voltage: 90 to 37 Vac, 80 to 264 Vac SPECIAL FEATURES 300 W output
More informationNetworking Computers and Peripherals Telecommunications
The Bel SRPE-30E1A0 is part of the non-isolated DC-DC converter Power Module series. The modules use a Vertical SMT package. These converters are available in a range of output voltages from 0.6 VDC to
More informationCool Power Technologies
- 1 - Cool Power Technologies Eighth-Brick Isolated DC/DC Converter Features Ultra-wide input voltage range: 18 72Vin Output: 12V at 9A,108W max. High Efficiency 92% Typical @ FL ROHS II Directive 2011/65/EU
More informationFor more information, please visit the product page. input voltage 1 range. output voltage
date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet
More informationCool Power Technologies
- 1 - Cool Power Technologies Eighth-Brick Isolated DC/DC Converter Features Ultra-wide input voltage range: 18 75Vin Output: 5V at 15A, 75W max. High Efficiency 92% Typical @ FL ROHS II Directive 2011/65/EU
More informationNon-ISOLATED DC/DC CONVERTERS 4.5 Vdc Vdc Input, 0.8 Vdc Vdc/6 A Output
0RLE06B1A0 RoHS Compliant Rev.B NonIsolated Fixed Frequency High Efficiency High Power Density Low Cost PriBias Startup Wide Operating Temperature Range (40 85 ) Remote On/Off Wide Trim Input Under Voltage
More informationCool Power Technologies
- 1 - Cool Power Technologies Eighth-Brick Isolated DC/DC Converter Features Ultra-wide input voltage range: 9 36Vin Output: 12V at 6 A, 72W max. ROHS Directive 2002/95/EC Compliant No minimum load required
More informationCool Power Technologies
- 1 - Cool Power Technologies Eighth-Brick Isolated DC/DC Converter Features Wide input voltage range: 36 72Vin Output: 29.8V at 4.7A, 140 W max. High Efficiency 93% Typical @ FL ROHS II Directive 2011/65/EU
More informationCool Power Technologies
- 1 - Cool Power Technologies Eighth-Brick Isolated DC/DC Converter Features Ultra-wide input voltage range: 40 150Vin Output: 24V @ 1.2A ROHS Directive 2011/65/EU Compliant No minimum load required Low
More informationPOWER CSU550AP. 550 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSU550AP 550 Watts Distributed Power System Front-end Bulk Power Total Output Power: 550 W continuous Wide Input Voltage: 90-264 Vac; 164-320 Vdc SPECIAL FEATURES 550 W output power High
More informationSXN15 48V SERIES. Dual output TÜV. High Efficiency DC/DC Converters
SXN15 48V SERIES Dual output High efficiency topology, 86% typical at 5V/3.3V Wide operating temperature, up to and exceedingly 65ºC (natural convection) 9% to 11% output trim No minimum load Overvoltage
More informationCool Power Technologies
- 1 - Cool Power Technologies Sixteenth-Brick Isolated DC/DC Converter Features Industry-standard pinout Ultra-wide input voltage range: 18 72Vin Output: 5 V at 14 A, 70W max. High Efficiency 90% typical
More informationCool Power Technologies
Cool Power Technologies Sixteenth-Brick Isolated DC/DC Converter Features Industry-standard pinout Ultra-wide input voltage range: 18 75Vin Output: 5 V at 8 A, 40W max. High Efficiency 90% typical @FL
More informationYEV09T06 6A DC-DC POL Converter 4.5V to 13.8V Input 0.59V to 5.1V Output Data Sheet
Member of the Family Applications Low voltage, high density systems with Intermediate Bus Architectures (IBA) Point-of-load regulators for high performance DSP, FPGA, ASIC, and microprocessors Desktops,
More informationQ54SJ W DC/DC Power Modules FEATURES. Q54SJ12058, 700W Quarter Brick DC/DC Power Modules: 40~60Vin, 12.2V/ 57.4A out OPTIONS APPLICATIONS
Q54SJ12058 700W DC/DC Power Modules FEATURES High efficiency: 96.4% @ 12.2V/57.4A out size : 57.9 x 36.8 x 12.0mm (2.28 x1.45 x0.47 ) (open frame) 57.9 x 36.8 x 13.4mm (2.28 x1.45 x0.53 ) (with base plate)
More informationISOLATED DC/DC CONVERTERS 48 Vdc Input, 12 Vdc/8.35 A Output
0RQB-C0U12C RoHS Compliant PRELIMINARY Rev.A Isolated Output Over Voltage Shutdown High Efficiency OCP/SCP High Power Density Over Temperature Protection Low Cost Remote On/Off Input Under Voltage Lockout
More informationConditions: TA = 25ºC, Airflow = 300 LFM (1.5 m/s), Vin = 48 VDC, unless otherwise specified. PARAMETER CONDITIONS / DESCRIPTION MIN TYP MAX UNITS
The QM Series of high current single output dc-dc converters sets new standards for thermal performance and power density in the quarter-brick package. The QM48T/S25050 converters of the QM Series provide
More information150 WATT QSW DC/DC CONVERTERS
Description The 4:1 Input Voltage 150 Watt Single QSW DC/DC converter provides a precisely regulated dc output. The output voltage is fully isolated from the input, allowing the output to be positive or
More informationCool Power Technologies
- 1 - Cool Power Technologies Eighth-Brick Isolated DC/DC Converter Features Ultra-wide input voltage range: 9 36Vin Output: 12V at 8A, 96W max. High Efficiency 92% Typical @ FL ROHS II Directive 2011/65/EU
More informationS24SP12004 series 40W Single Output DC/DC Converter
FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2.
More informationS24SP05012 series 60W Single Output DC/DC Converter
Model List Model Number S24SP05012 Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=10mohm;Full Efficiency load;5%overshoot
More information12 Vdc 48 Vdc 50 A 600 W 96% 0RQ1-H0T12B 0RQ1-H0T12A 12 Vdc 48 Vdc 50 A 600 W 96% 0RQ1-H0T12D 0RQ1-H0T12C
0RQ1-H0T12x RoHS Compliant Rev.G Features Basic Isolation Input Under-voltage lockout High Efficiency Input over voltage lockout Fixed Frequency (300 KHz) Output Over-voltage Protection High Power Density
More informationS24SP24003 series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 93% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2. x1.
More informationOne part that covers many applications Reduces board space, system cost and complexity, and time to market. North America
Bel Power Solutions point-of-load converters are recommended for use with regulated bus converters in an Intermediate Bus Architecture (IBA). The YEV09T, non-isolated DC-DC point of load (POL) converter,
More informationQME48T20120 DC-DC Converter Data Sheet VDC Input; A Output Data Sheet
Applications Telecommunications Data communications Wireless communications Servers, workstations Benefits High efficiency no heat sink required Features RoHS lead free solder and lead-solder-exempted
More information200 WATT TH SERIES DC/DC CONVERTERS
Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection
More informationNON-ISOLATED DC/DC CONVERTERS
SRAH-05B / VRAH-05B Series RoHS Compliant Nonisolated Compact, low profile surface mount package Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for
More informationNON-ISOLATED DC/DC CONVERTERS
S7DB-07A Series Nonisolated Compact, low profile surface mount package Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for cost Remote on/off Undervoltage
More informationQM48T/S14120 DC-DC Converter Data Sheet VDC Input; A Output
Applications Telecommunications Data communications Wireless communications Servers, workstations Benefits High efficiency no heat sink required Higher current capability at 70 C than many competitors
More informationElectrical Specifications. Input voltage range Vac: 1000 W/1200 W Vac: 1200 W. Max input current. ITHD 10% Leakage current
POWER Data Sheet DS1200HE 1200 Watts Distributed Power System Front-end Bulk Power Total Output Power: 180 to 264 Vac: 1200 W continuous 90 to 140 Vac: 1000 W/ 1200 W 1 continuous SPECIAL FEATURES 1200
More informationQME48T40 DC-DC Series Data Sheet VDC Input; A Output
Applications Telecommunications Data communications Wireless communications Servers, Workstations Benefits High efficiency no heat sink required Higher current capability at 70 ºC than most competitors
More information0RQB-X3S11B(F) Isolated DC-DC Converter
0RQB-X3S11B(F) Isolated DC-DC Converter The 0RQB-X3S11B(F) is an isolated DC/DC converter that operates from a nominal 50/54 Vdc source. This converter is intended to provide isolation and step down to
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationYNV12T05 DC-DC Converter Data Sheet VDC Input; VDC 5 A
The Products: Y-Series Applications Intermediate Bus Architectures Telecommunications Data communications Distributed Power Architectures Servers, workstations Benefits High efficiency no heat sink required
More informationPARAMETER CONDITIONS / DESCRIPTION MIN TYP MAX UNITS. Input Voltage Continuous 0 80 VDC. Operating Ambient Temperature C
The QME48T40 DC-DC Series of converters provide outstanding thermal performance in high temperature environments. This performance is accomplished through the use of patented/patent-pending circuits, packaging,
More informationISOLATED DC/DC CONVERTERS 48 Vdc Input 3.3 Vdc - 24 Vdc/7 A A Output. Bel Power, Inc., a subsidiary of Bel Fuse, Inc.
ISOLTED DC/DC CONERTERS 48 dc Input 3.3 dc 24 dc/7 1.25 Output Features Isolated Output Over oltage Shutdown High Efficiency Output oltage Trim High Power Density OCP/SCP Fixed Frequency (23 KHz) Over
More informationNON-ISOLATED DC/DC CONVERTERS 9.0 Vdc - 18 Vdc Input 5 Vdc - 12 Vdc/1A Output
NONISOLATED DC/DC CONVERTERS 9.0 Vdc 18 Vdc Input 5 Vdc 12 Vdc/1A Output xrah01k Series RoHS Compliant Rev.A NonIsolated High Efficiency Fixed Frequency (450kHz) UL609501 Recognized (UL/cUL) Low Profile
More informationElectrical Specifications. Input range Vac (Operating) 115/230 Vac (Nominal) TERMINAL BLOCK Frequency Hz, Nominal 50/60
POWER Data Sheet LCM300 310 Watt Bulk Front End Total Power: 310 W # of Outputs: Single Outputs: 12 to 60 V Optional 5.0 V standby SPECIAL FEATURES 310 W output power (350 W at 45 C for 24 V and 36 V models)
More informationThis unit is designed to be highly efficient and low cost. Features include remote on/off, over current protection and overvoltage protection.
The 0RQB-C2Q12x is an isolated dc/dc converter that operates from a nominal 24 VDC source. This unit will provide up to 156 W of output power from a nominal 24 VDC input. This unit is designed to be highly
More informationCool Power Technologies
- 1 - Cool Power Technologies Thirty-Second-Brick Isolated DC/DC Converter Features DOSA standard 32 nd brick footprint Only 0.92 X 0.76 x 0.35 max. ht. Ultra-wide input voltage range: 18 72Vin Output:
More information